| 1 | // SPDX-License-Identifier: GPL-2.0-only |
| 2 | /* |
| 3 | * Analog Devices ADV7511 HDMI transmitter driver |
| 4 | * |
| 5 | * Copyright 2012 Analog Devices Inc. |
| 6 | */ |
| 7 | |
| 8 | #include <linux/clk.h> |
| 9 | #include <linux/device.h> |
| 10 | #include <linux/gpio/consumer.h> |
| 11 | #include <linux/module.h> |
| 12 | #include <linux/of.h> |
| 13 | #include <linux/slab.h> |
| 14 | |
| 15 | #include <sound/pcm.h> |
| 16 | |
| 17 | #include <drm/drm_atomic.h> |
| 18 | #include <drm/drm_atomic_helper.h> |
| 19 | #include <drm/drm_bridge_connector.h> |
| 20 | #include <drm/drm_edid.h> |
| 21 | #include <drm/drm_of.h> |
| 22 | #include <drm/drm_print.h> |
| 23 | #include <drm/drm_probe_helper.h> |
| 24 | #include <drm/display/drm_hdmi_helper.h> |
| 25 | #include <drm/display/drm_hdmi_state_helper.h> |
| 26 | |
| 27 | #include "adv7511.h" |
| 28 | |
| 29 | /* ADI recommended values for proper operation. */ |
| 30 | static const struct reg_sequence adv7511_fixed_registers[] = { |
| 31 | { 0x98, 0x03 }, |
| 32 | { 0x9a, 0xe0 }, |
| 33 | { 0x9c, 0x30 }, |
| 34 | { 0x9d, 0x61 }, |
| 35 | { 0xa2, 0xa4 }, |
| 36 | { 0xa3, 0xa4 }, |
| 37 | { 0xe0, 0xd0 }, |
| 38 | { 0xf9, 0x00 }, |
| 39 | { 0x55, 0x02 }, |
| 40 | }; |
| 41 | |
| 42 | /* ----------------------------------------------------------------------------- |
| 43 | * Register access |
| 44 | */ |
| 45 | |
| 46 | static const uint8_t adv7511_register_defaults[] = { |
| 47 | 0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 00 */ |
| 48 | 0x00, 0x00, 0x01, 0x0e, 0xbc, 0x18, 0x01, 0x13, |
| 49 | 0x25, 0x37, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 10 */ |
| 50 | 0x46, 0x62, 0x04, 0xa8, 0x00, 0x00, 0x1c, 0x84, |
| 51 | 0x1c, 0xbf, 0x04, 0xa8, 0x1e, 0x70, 0x02, 0x1e, /* 20 */ |
| 52 | 0x00, 0x00, 0x04, 0xa8, 0x08, 0x12, 0x1b, 0xac, |
| 53 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 30 */ |
| 54 | 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0xb0, |
| 55 | 0x00, 0x50, 0x90, 0x7e, 0x79, 0x70, 0x00, 0x00, /* 40 */ |
| 56 | 0x00, 0xa8, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 57 | 0x00, 0x00, 0x02, 0x0d, 0x00, 0x00, 0x00, 0x00, /* 50 */ |
| 58 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 59 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 60 */ |
| 60 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 61 | 0x01, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 70 */ |
| 62 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 63 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 80 */ |
| 64 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 65 | 0x00, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, /* 90 */ |
| 66 | 0x0b, 0x02, 0x00, 0x18, 0x5a, 0x60, 0x00, 0x00, |
| 67 | 0x00, 0x00, 0x80, 0x80, 0x08, 0x04, 0x00, 0x00, /* a0 */ |
| 68 | 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x14, |
| 69 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b0 */ |
| 70 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 71 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c0 */ |
| 72 | 0x00, 0x03, 0x00, 0x00, 0x02, 0x00, 0x01, 0x04, |
| 73 | 0x30, 0xff, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, /* d0 */ |
| 74 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x01, |
| 75 | 0x80, 0x75, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, /* e0 */ |
| 76 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 77 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x75, 0x11, 0x00, /* f0 */ |
| 78 | 0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 79 | }; |
| 80 | |
| 81 | static bool adv7511_register_volatile(struct device *dev, unsigned int reg) |
| 82 | { |
| 83 | switch (reg) { |
| 84 | case ADV7511_REG_CHIP_REVISION: |
| 85 | case ADV7511_REG_SPDIF_FREQ: |
| 86 | case ADV7511_REG_CTS_AUTOMATIC1: |
| 87 | case ADV7511_REG_CTS_AUTOMATIC2: |
| 88 | case ADV7511_REG_VIC_DETECTED: |
| 89 | case ADV7511_REG_VIC_SEND: |
| 90 | case ADV7511_REG_AUX_VIC_DETECTED: |
| 91 | case ADV7511_REG_STATUS: |
| 92 | case ADV7511_REG_GC(1): |
| 93 | case ADV7511_REG_INT(0): |
| 94 | case ADV7511_REG_INT(1): |
| 95 | case ADV7511_REG_PLL_STATUS: |
| 96 | case ADV7511_REG_AN(0): |
| 97 | case ADV7511_REG_AN(1): |
| 98 | case ADV7511_REG_AN(2): |
| 99 | case ADV7511_REG_AN(3): |
| 100 | case ADV7511_REG_AN(4): |
| 101 | case ADV7511_REG_AN(5): |
| 102 | case ADV7511_REG_AN(6): |
| 103 | case ADV7511_REG_AN(7): |
| 104 | case ADV7511_REG_HDCP_STATUS: |
| 105 | case ADV7511_REG_BCAPS: |
| 106 | case ADV7511_REG_BKSV(0): |
| 107 | case ADV7511_REG_BKSV(1): |
| 108 | case ADV7511_REG_BKSV(2): |
| 109 | case ADV7511_REG_BKSV(3): |
| 110 | case ADV7511_REG_BKSV(4): |
| 111 | case ADV7511_REG_DDC_STATUS: |
| 112 | case ADV7511_REG_EDID_READ_CTRL: |
| 113 | case ADV7511_REG_BSTATUS(0): |
| 114 | case ADV7511_REG_BSTATUS(1): |
| 115 | case ADV7511_REG_CHIP_ID_HIGH: |
| 116 | case ADV7511_REG_CHIP_ID_LOW: |
| 117 | return true; |
| 118 | } |
| 119 | |
| 120 | return false; |
| 121 | } |
| 122 | |
| 123 | static const struct regmap_config adv7511_regmap_config = { |
| 124 | .reg_bits = 8, |
| 125 | .val_bits = 8, |
| 126 | |
| 127 | .max_register = 0xff, |
| 128 | .cache_type = REGCACHE_MAPLE, |
| 129 | .reg_defaults_raw = adv7511_register_defaults, |
| 130 | .num_reg_defaults_raw = ARRAY_SIZE(adv7511_register_defaults), |
| 131 | |
| 132 | .volatile_reg = adv7511_register_volatile, |
| 133 | }; |
| 134 | |
| 135 | static const struct regmap_config adv7511_packet_config = { |
| 136 | .reg_bits = 8, |
| 137 | .val_bits = 8, |
| 138 | |
| 139 | .max_register = 0xff, |
| 140 | }; |
| 141 | |
| 142 | /* ----------------------------------------------------------------------------- |
| 143 | * Hardware configuration |
| 144 | */ |
| 145 | |
| 146 | static void adv7511_set_colormap(struct adv7511 *adv7511, bool enable, |
| 147 | const uint16_t *coeff, |
| 148 | unsigned int scaling_factor) |
| 149 | { |
| 150 | unsigned int i; |
| 151 | |
| 152 | regmap_update_bits(map: adv7511->regmap, ADV7511_REG_CSC_UPPER(1), |
| 153 | ADV7511_CSC_UPDATE_MODE, ADV7511_CSC_UPDATE_MODE); |
| 154 | |
| 155 | if (enable) { |
| 156 | for (i = 0; i < 12; ++i) { |
| 157 | regmap_update_bits(map: adv7511->regmap, |
| 158 | ADV7511_REG_CSC_UPPER(i), |
| 159 | mask: 0x1f, val: coeff[i] >> 8); |
| 160 | regmap_write(map: adv7511->regmap, |
| 161 | ADV7511_REG_CSC_LOWER(i), |
| 162 | val: coeff[i] & 0xff); |
| 163 | } |
| 164 | } |
| 165 | |
| 166 | if (enable) |
| 167 | regmap_update_bits(map: adv7511->regmap, ADV7511_REG_CSC_UPPER(0), |
| 168 | mask: 0xe0, val: 0x80 | (scaling_factor << 5)); |
| 169 | else |
| 170 | regmap_update_bits(map: adv7511->regmap, ADV7511_REG_CSC_UPPER(0), |
| 171 | mask: 0x80, val: 0x00); |
| 172 | |
| 173 | regmap_update_bits(map: adv7511->regmap, ADV7511_REG_CSC_UPPER(1), |
| 174 | ADV7511_CSC_UPDATE_MODE, val: 0); |
| 175 | } |
| 176 | |
| 177 | static int adv7511_packet_enable(struct adv7511 *adv7511, unsigned int packet) |
| 178 | { |
| 179 | if (packet & 0xff) |
| 180 | regmap_update_bits(map: adv7511->regmap, ADV7511_REG_PACKET_ENABLE0, |
| 181 | mask: packet, val: 0xff); |
| 182 | |
| 183 | if (packet & 0xff00) { |
| 184 | packet >>= 8; |
| 185 | regmap_update_bits(map: adv7511->regmap, ADV7511_REG_PACKET_ENABLE1, |
| 186 | mask: packet, val: 0xff); |
| 187 | } |
| 188 | |
| 189 | return 0; |
| 190 | } |
| 191 | |
| 192 | static int adv7511_packet_disable(struct adv7511 *adv7511, unsigned int packet) |
| 193 | { |
| 194 | if (packet & 0xff) |
| 195 | regmap_update_bits(map: adv7511->regmap, ADV7511_REG_PACKET_ENABLE0, |
| 196 | mask: packet, val: 0x00); |
| 197 | |
| 198 | if (packet & 0xff00) { |
| 199 | packet >>= 8; |
| 200 | regmap_update_bits(map: adv7511->regmap, ADV7511_REG_PACKET_ENABLE1, |
| 201 | mask: packet, val: 0x00); |
| 202 | } |
| 203 | |
| 204 | return 0; |
| 205 | } |
| 206 | |
| 207 | /* Coefficients for adv7511 color space conversion */ |
| 208 | static const uint16_t adv7511_csc_ycbcr_to_rgb[] = { |
| 209 | 0x0734, 0x04ad, 0x0000, 0x1c1b, |
| 210 | 0x1ddc, 0x04ad, 0x1f24, 0x0135, |
| 211 | 0x0000, 0x04ad, 0x087c, 0x1b77, |
| 212 | }; |
| 213 | |
| 214 | static void adv7511_set_config_csc(struct adv7511 *adv7511, |
| 215 | struct drm_connector *connector, |
| 216 | bool rgb) |
| 217 | { |
| 218 | struct adv7511_video_config config; |
| 219 | bool output_format_422, output_format_ycbcr; |
| 220 | unsigned int mode; |
| 221 | |
| 222 | if (rgb) { |
| 223 | config.csc_enable = false; |
| 224 | output_format_422 = false; |
| 225 | output_format_ycbcr = false; |
| 226 | } else { |
| 227 | config.csc_scaling_factor = ADV7511_CSC_SCALING_4; |
| 228 | config.csc_coefficents = adv7511_csc_ycbcr_to_rgb; |
| 229 | |
| 230 | if ((connector->display_info.color_formats & |
| 231 | DRM_COLOR_FORMAT_YCBCR422) && |
| 232 | connector->display_info.is_hdmi) { |
| 233 | config.csc_enable = false; |
| 234 | output_format_422 = true; |
| 235 | output_format_ycbcr = true; |
| 236 | } else { |
| 237 | config.csc_enable = true; |
| 238 | output_format_422 = false; |
| 239 | output_format_ycbcr = false; |
| 240 | } |
| 241 | } |
| 242 | |
| 243 | if (connector->display_info.is_hdmi) |
| 244 | mode = ADV7511_HDMI_CFG_MODE_HDMI; |
| 245 | else |
| 246 | mode = ADV7511_HDMI_CFG_MODE_DVI; |
| 247 | |
| 248 | adv7511_set_colormap(adv7511, enable: config.csc_enable, |
| 249 | coeff: config.csc_coefficents, |
| 250 | scaling_factor: config.csc_scaling_factor); |
| 251 | |
| 252 | regmap_update_bits(map: adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG1, mask: 0x81, |
| 253 | val: (output_format_422 << 7) | output_format_ycbcr); |
| 254 | |
| 255 | regmap_update_bits(map: adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG, |
| 256 | ADV7511_HDMI_CFG_MODE_MASK, val: mode); |
| 257 | } |
| 258 | |
| 259 | static void adv7511_set_link_config(struct adv7511 *adv7511, |
| 260 | const struct adv7511_link_config *config) |
| 261 | { |
| 262 | /* |
| 263 | * The input style values documented in the datasheet don't match the |
| 264 | * hardware register field values :-( |
| 265 | */ |
| 266 | static const unsigned int input_styles[4] = { 0, 2, 1, 3 }; |
| 267 | |
| 268 | unsigned int clock_delay; |
| 269 | unsigned int color_depth; |
| 270 | unsigned int input_id; |
| 271 | |
| 272 | clock_delay = (config->clock_delay + 1200) / 400; |
| 273 | color_depth = config->input_color_depth == 8 ? 3 |
| 274 | : (config->input_color_depth == 10 ? 1 : 2); |
| 275 | |
| 276 | /* TODO Support input ID 6 */ |
| 277 | if (config->input_colorspace != HDMI_COLORSPACE_YUV422) |
| 278 | input_id = config->input_clock == ADV7511_INPUT_CLOCK_DDR |
| 279 | ? 5 : 0; |
| 280 | else if (config->input_clock == ADV7511_INPUT_CLOCK_DDR) |
| 281 | input_id = config->embedded_sync ? 8 : 7; |
| 282 | else if (config->input_clock == ADV7511_INPUT_CLOCK_2X) |
| 283 | input_id = config->embedded_sync ? 4 : 3; |
| 284 | else |
| 285 | input_id = config->embedded_sync ? 2 : 1; |
| 286 | |
| 287 | regmap_update_bits(map: adv7511->regmap, ADV7511_REG_I2C_FREQ_ID_CFG, mask: 0xf, |
| 288 | val: input_id); |
| 289 | regmap_update_bits(map: adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG1, mask: 0x7e, |
| 290 | val: (color_depth << 4) | |
| 291 | (input_styles[config->input_style] << 2)); |
| 292 | regmap_write(map: adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG2, |
| 293 | val: config->input_justification << 3); |
| 294 | regmap_write(map: adv7511->regmap, ADV7511_REG_TIMING_GEN_SEQ, |
| 295 | val: config->sync_pulse << 2); |
| 296 | |
| 297 | regmap_write(map: adv7511->regmap, reg: 0xba, val: clock_delay << 5); |
| 298 | |
| 299 | adv7511->embedded_sync = config->embedded_sync; |
| 300 | adv7511->hsync_polarity = config->hsync_polarity; |
| 301 | adv7511->vsync_polarity = config->vsync_polarity; |
| 302 | adv7511->rgb = config->input_colorspace == HDMI_COLORSPACE_RGB; |
| 303 | } |
| 304 | |
| 305 | static void __adv7511_power_on(struct adv7511 *adv7511) |
| 306 | { |
| 307 | adv7511->current_edid_segment = -1; |
| 308 | |
| 309 | regmap_update_bits(map: adv7511->regmap, ADV7511_REG_POWER, |
| 310 | ADV7511_POWER_POWER_DOWN, val: 0); |
| 311 | if (adv7511->i2c_main->irq) { |
| 312 | /* |
| 313 | * Documentation says the INT_ENABLE registers are reset in |
| 314 | * POWER_DOWN mode. My 7511w preserved the bits, however. |
| 315 | * Still, let's be safe and stick to the documentation. |
| 316 | */ |
| 317 | regmap_write(map: adv7511->regmap, ADV7511_REG_INT_ENABLE(0), |
| 318 | ADV7511_INT0_EDID_READY | ADV7511_INT0_HPD); |
| 319 | regmap_update_bits(map: adv7511->regmap, |
| 320 | ADV7511_REG_INT_ENABLE(1), |
| 321 | ADV7511_INT1_DDC_ERROR, |
| 322 | ADV7511_INT1_DDC_ERROR); |
| 323 | } |
| 324 | |
| 325 | /* |
| 326 | * Per spec it is allowed to pulse the HPD signal to indicate that the |
| 327 | * EDID information has changed. Some monitors do this when they wakeup |
| 328 | * from standby or are enabled. When the HPD goes low the adv7511 is |
| 329 | * reset and the outputs are disabled which might cause the monitor to |
| 330 | * go to standby again. To avoid this we ignore the HPD pin for the |
| 331 | * first few seconds after enabling the output. On the other hand |
| 332 | * adv7535 require to enable HPD Override bit for proper HPD. |
| 333 | */ |
| 334 | if (adv7511->info->hpd_override_enable) |
| 335 | regmap_update_bits(map: adv7511->regmap, ADV7511_REG_POWER2, |
| 336 | ADV7535_REG_POWER2_HPD_OVERRIDE, |
| 337 | ADV7535_REG_POWER2_HPD_OVERRIDE); |
| 338 | else |
| 339 | regmap_update_bits(map: adv7511->regmap, ADV7511_REG_POWER2, |
| 340 | ADV7511_REG_POWER2_HPD_SRC_MASK, |
| 341 | ADV7511_REG_POWER2_HPD_SRC_NONE); |
| 342 | } |
| 343 | |
| 344 | static void adv7511_power_on(struct adv7511 *adv7511) |
| 345 | { |
| 346 | __adv7511_power_on(adv7511); |
| 347 | |
| 348 | /* |
| 349 | * Most of the registers are reset during power down or when HPD is low. |
| 350 | */ |
| 351 | regcache_sync(map: adv7511->regmap); |
| 352 | |
| 353 | if (adv7511->info->has_dsi) |
| 354 | adv7533_dsi_power_on(adv: adv7511); |
| 355 | adv7511->powered = true; |
| 356 | } |
| 357 | |
| 358 | static void __adv7511_power_off(struct adv7511 *adv7511) |
| 359 | { |
| 360 | /* TODO: setup additional power down modes */ |
| 361 | if (adv7511->info->hpd_override_enable) |
| 362 | regmap_update_bits(map: adv7511->regmap, ADV7511_REG_POWER2, |
| 363 | ADV7535_REG_POWER2_HPD_OVERRIDE, val: 0); |
| 364 | |
| 365 | regmap_update_bits(map: adv7511->regmap, ADV7511_REG_POWER, |
| 366 | ADV7511_POWER_POWER_DOWN, |
| 367 | ADV7511_POWER_POWER_DOWN); |
| 368 | regmap_update_bits(map: adv7511->regmap, |
| 369 | ADV7511_REG_INT_ENABLE(1), |
| 370 | ADV7511_INT1_DDC_ERROR, val: 0); |
| 371 | regcache_mark_dirty(map: adv7511->regmap); |
| 372 | } |
| 373 | |
| 374 | static void adv7511_power_off(struct adv7511 *adv7511) |
| 375 | { |
| 376 | __adv7511_power_off(adv7511); |
| 377 | if (adv7511->info->has_dsi) |
| 378 | adv7533_dsi_power_off(adv: adv7511); |
| 379 | adv7511->powered = false; |
| 380 | } |
| 381 | |
| 382 | /* ----------------------------------------------------------------------------- |
| 383 | * Interrupt and hotplug detection |
| 384 | */ |
| 385 | |
| 386 | static bool adv7511_hpd(struct adv7511 *adv7511) |
| 387 | { |
| 388 | unsigned int irq0; |
| 389 | int ret; |
| 390 | |
| 391 | ret = regmap_read(map: adv7511->regmap, ADV7511_REG_INT(0), val: &irq0); |
| 392 | if (ret < 0) |
| 393 | return false; |
| 394 | |
| 395 | if (irq0 & ADV7511_INT0_HPD) { |
| 396 | regmap_write(map: adv7511->regmap, ADV7511_REG_INT(0), |
| 397 | ADV7511_INT0_HPD); |
| 398 | return true; |
| 399 | } |
| 400 | |
| 401 | return false; |
| 402 | } |
| 403 | |
| 404 | static void adv7511_hpd_work(struct work_struct *work) |
| 405 | { |
| 406 | struct adv7511 *adv7511 = container_of(work, struct adv7511, hpd_work); |
| 407 | enum drm_connector_status status; |
| 408 | unsigned int val; |
| 409 | int ret; |
| 410 | |
| 411 | ret = regmap_read(map: adv7511->regmap, ADV7511_REG_STATUS, val: &val); |
| 412 | if (ret < 0) |
| 413 | status = connector_status_disconnected; |
| 414 | else if (val & ADV7511_STATUS_HPD) |
| 415 | status = connector_status_connected; |
| 416 | else |
| 417 | status = connector_status_disconnected; |
| 418 | |
| 419 | /* |
| 420 | * The bridge resets its registers on unplug. So when we get a plug |
| 421 | * event and we're already supposed to be powered, cycle the bridge to |
| 422 | * restore its state. |
| 423 | */ |
| 424 | if (status == connector_status_connected && |
| 425 | adv7511->status == connector_status_disconnected && |
| 426 | adv7511->powered) { |
| 427 | regcache_mark_dirty(map: adv7511->regmap); |
| 428 | adv7511_power_on(adv7511); |
| 429 | } |
| 430 | |
| 431 | if (adv7511->status != status) { |
| 432 | adv7511->status = status; |
| 433 | |
| 434 | drm_bridge_hpd_notify(bridge: &adv7511->bridge, status); |
| 435 | } |
| 436 | } |
| 437 | |
| 438 | static int adv7511_irq_process(struct adv7511 *adv7511, bool process_hpd) |
| 439 | { |
| 440 | unsigned int irq0, irq1; |
| 441 | int ret; |
| 442 | int cec_status = IRQ_NONE; |
| 443 | int irq_status = IRQ_NONE; |
| 444 | |
| 445 | ret = regmap_read(map: adv7511->regmap, ADV7511_REG_INT(0), val: &irq0); |
| 446 | if (ret < 0) |
| 447 | return ret; |
| 448 | |
| 449 | ret = regmap_read(map: adv7511->regmap, ADV7511_REG_INT(1), val: &irq1); |
| 450 | if (ret < 0) |
| 451 | return ret; |
| 452 | |
| 453 | regmap_write(map: adv7511->regmap, ADV7511_REG_INT(0), val: irq0); |
| 454 | regmap_write(map: adv7511->regmap, ADV7511_REG_INT(1), val: irq1); |
| 455 | |
| 456 | if (process_hpd && irq0 & ADV7511_INT0_HPD && adv7511->bridge.encoder) { |
| 457 | schedule_work(work: &adv7511->hpd_work); |
| 458 | irq_status = IRQ_HANDLED; |
| 459 | } |
| 460 | |
| 461 | if (irq0 & ADV7511_INT0_EDID_READY || irq1 & ADV7511_INT1_DDC_ERROR) { |
| 462 | adv7511->edid_read = true; |
| 463 | |
| 464 | if (adv7511->i2c_main->irq) |
| 465 | wake_up_all(&adv7511->wq); |
| 466 | irq_status = IRQ_HANDLED; |
| 467 | } |
| 468 | |
| 469 | #ifdef CONFIG_DRM_I2C_ADV7511_CEC |
| 470 | cec_status = adv7511_cec_irq_process(adv7511, irq1); |
| 471 | #endif |
| 472 | |
| 473 | /* If there is no IRQ to handle, exit indicating no IRQ data */ |
| 474 | if (irq_status == IRQ_HANDLED || cec_status == IRQ_HANDLED) |
| 475 | return IRQ_HANDLED; |
| 476 | |
| 477 | return IRQ_NONE; |
| 478 | } |
| 479 | |
| 480 | static irqreturn_t adv7511_irq_handler(int irq, void *devid) |
| 481 | { |
| 482 | struct adv7511 *adv7511 = devid; |
| 483 | int ret; |
| 484 | |
| 485 | ret = adv7511_irq_process(adv7511, process_hpd: true); |
| 486 | return ret < 0 ? IRQ_NONE : ret; |
| 487 | } |
| 488 | |
| 489 | /* ----------------------------------------------------------------------------- |
| 490 | * EDID retrieval |
| 491 | */ |
| 492 | |
| 493 | static int adv7511_wait_for_edid(struct adv7511 *adv7511, int timeout) |
| 494 | { |
| 495 | int ret; |
| 496 | |
| 497 | if (adv7511->i2c_main->irq) { |
| 498 | ret = wait_event_interruptible_timeout(adv7511->wq, |
| 499 | adv7511->edid_read, msecs_to_jiffies(timeout)); |
| 500 | } else { |
| 501 | for (; timeout > 0; timeout -= 25) { |
| 502 | ret = adv7511_irq_process(adv7511, process_hpd: false); |
| 503 | if (ret < 0) |
| 504 | break; |
| 505 | |
| 506 | if (adv7511->edid_read) |
| 507 | break; |
| 508 | |
| 509 | msleep(msecs: 25); |
| 510 | } |
| 511 | } |
| 512 | |
| 513 | return adv7511->edid_read ? 0 : -EIO; |
| 514 | } |
| 515 | |
| 516 | static int adv7511_get_edid_block(void *data, u8 *buf, unsigned int block, |
| 517 | size_t len) |
| 518 | { |
| 519 | struct adv7511 *adv7511 = data; |
| 520 | struct i2c_msg xfer[2]; |
| 521 | uint8_t offset; |
| 522 | unsigned int i; |
| 523 | int ret; |
| 524 | |
| 525 | if (len > 128) |
| 526 | return -EINVAL; |
| 527 | |
| 528 | if (adv7511->current_edid_segment != block / 2) { |
| 529 | unsigned int status; |
| 530 | |
| 531 | ret = regmap_read(map: adv7511->regmap, ADV7511_REG_DDC_STATUS, |
| 532 | val: &status); |
| 533 | if (ret < 0) |
| 534 | return ret; |
| 535 | |
| 536 | if (status != 2) { |
| 537 | adv7511->edid_read = false; |
| 538 | regmap_write(map: adv7511->regmap, ADV7511_REG_EDID_SEGMENT, |
| 539 | val: block); |
| 540 | ret = adv7511_wait_for_edid(adv7511, timeout: 200); |
| 541 | if (ret < 0) |
| 542 | return ret; |
| 543 | } |
| 544 | |
| 545 | /* Break this apart, hopefully more I2C controllers will |
| 546 | * support 64 byte transfers than 256 byte transfers |
| 547 | */ |
| 548 | |
| 549 | xfer[0].addr = adv7511->i2c_edid->addr; |
| 550 | xfer[0].flags = 0; |
| 551 | xfer[0].len = 1; |
| 552 | xfer[0].buf = &offset; |
| 553 | xfer[1].addr = adv7511->i2c_edid->addr; |
| 554 | xfer[1].flags = I2C_M_RD; |
| 555 | xfer[1].len = 64; |
| 556 | xfer[1].buf = adv7511->edid_buf; |
| 557 | |
| 558 | offset = 0; |
| 559 | |
| 560 | for (i = 0; i < 4; ++i) { |
| 561 | ret = i2c_transfer(adap: adv7511->i2c_edid->adapter, msgs: xfer, |
| 562 | ARRAY_SIZE(xfer)); |
| 563 | if (ret < 0) |
| 564 | return ret; |
| 565 | else if (ret != 2) |
| 566 | return -EIO; |
| 567 | |
| 568 | xfer[1].buf += 64; |
| 569 | offset += 64; |
| 570 | } |
| 571 | |
| 572 | adv7511->current_edid_segment = block / 2; |
| 573 | } |
| 574 | |
| 575 | if (block % 2 == 0) |
| 576 | memcpy(buf, adv7511->edid_buf, len); |
| 577 | else |
| 578 | memcpy(buf, adv7511->edid_buf + 128, len); |
| 579 | |
| 580 | return 0; |
| 581 | } |
| 582 | |
| 583 | /* ----------------------------------------------------------------------------- |
| 584 | * ADV75xx helpers |
| 585 | */ |
| 586 | |
| 587 | static const struct drm_edid *adv7511_edid_read(struct adv7511 *adv7511, |
| 588 | struct drm_connector *connector) |
| 589 | { |
| 590 | const struct drm_edid *drm_edid; |
| 591 | |
| 592 | /* Reading the EDID only works if the device is powered */ |
| 593 | if (!adv7511->powered) { |
| 594 | unsigned int edid_i2c_addr = |
| 595 | (adv7511->i2c_edid->addr << 1); |
| 596 | |
| 597 | __adv7511_power_on(adv7511); |
| 598 | |
| 599 | /* Reset the EDID_I2C_ADDR register as it might be cleared */ |
| 600 | regmap_write(map: adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, |
| 601 | val: edid_i2c_addr); |
| 602 | } |
| 603 | |
| 604 | drm_edid = drm_edid_read_custom(connector, read_block: adv7511_get_edid_block, context: adv7511); |
| 605 | |
| 606 | if (!adv7511->powered) |
| 607 | __adv7511_power_off(adv7511); |
| 608 | |
| 609 | return drm_edid; |
| 610 | } |
| 611 | |
| 612 | static enum drm_connector_status |
| 613 | adv7511_detect(struct adv7511 *adv7511) |
| 614 | { |
| 615 | enum drm_connector_status status; |
| 616 | unsigned int val; |
| 617 | bool hpd; |
| 618 | int ret; |
| 619 | |
| 620 | ret = regmap_read(map: adv7511->regmap, ADV7511_REG_STATUS, val: &val); |
| 621 | if (ret < 0) |
| 622 | return connector_status_disconnected; |
| 623 | |
| 624 | if (val & ADV7511_STATUS_HPD) |
| 625 | status = connector_status_connected; |
| 626 | else |
| 627 | status = connector_status_disconnected; |
| 628 | |
| 629 | hpd = adv7511_hpd(adv7511); |
| 630 | |
| 631 | /* The chip resets itself when the cable is disconnected, so in case |
| 632 | * there is a pending HPD interrupt and the cable is connected there was |
| 633 | * at least one transition from disconnected to connected and the chip |
| 634 | * has to be reinitialized. */ |
| 635 | if (status == connector_status_connected && hpd && adv7511->powered) { |
| 636 | regcache_mark_dirty(map: adv7511->regmap); |
| 637 | adv7511_power_on(adv7511); |
| 638 | if (adv7511->status == connector_status_connected) |
| 639 | status = connector_status_disconnected; |
| 640 | } else { |
| 641 | /* Renable HPD sensing */ |
| 642 | if (adv7511->info->hpd_override_enable) |
| 643 | regmap_update_bits(map: adv7511->regmap, ADV7511_REG_POWER2, |
| 644 | ADV7535_REG_POWER2_HPD_OVERRIDE, |
| 645 | ADV7535_REG_POWER2_HPD_OVERRIDE); |
| 646 | else |
| 647 | regmap_update_bits(map: adv7511->regmap, ADV7511_REG_POWER2, |
| 648 | ADV7511_REG_POWER2_HPD_SRC_MASK, |
| 649 | ADV7511_REG_POWER2_HPD_SRC_BOTH); |
| 650 | } |
| 651 | |
| 652 | adv7511->status = status; |
| 653 | return status; |
| 654 | } |
| 655 | |
| 656 | static void adv7511_mode_set(struct adv7511 *adv7511, |
| 657 | const struct drm_display_mode *adj_mode) |
| 658 | { |
| 659 | unsigned int low_refresh_rate; |
| 660 | unsigned int hsync_polarity = 0; |
| 661 | unsigned int vsync_polarity = 0; |
| 662 | |
| 663 | if (adv7511->embedded_sync) { |
| 664 | unsigned int hsync_offset, hsync_len; |
| 665 | unsigned int vsync_offset, vsync_len; |
| 666 | |
| 667 | hsync_offset = adj_mode->crtc_hsync_start - |
| 668 | adj_mode->crtc_hdisplay; |
| 669 | vsync_offset = adj_mode->crtc_vsync_start - |
| 670 | adj_mode->crtc_vdisplay; |
| 671 | hsync_len = adj_mode->crtc_hsync_end - |
| 672 | adj_mode->crtc_hsync_start; |
| 673 | vsync_len = adj_mode->crtc_vsync_end - |
| 674 | adj_mode->crtc_vsync_start; |
| 675 | |
| 676 | /* The hardware vsync generator has a off-by-one bug */ |
| 677 | vsync_offset += 1; |
| 678 | |
| 679 | regmap_write(map: adv7511->regmap, ADV7511_REG_HSYNC_PLACEMENT_MSB, |
| 680 | val: ((hsync_offset >> 10) & 0x7) << 5); |
| 681 | regmap_write(map: adv7511->regmap, ADV7511_REG_SYNC_DECODER(0), |
| 682 | val: (hsync_offset >> 2) & 0xff); |
| 683 | regmap_write(map: adv7511->regmap, ADV7511_REG_SYNC_DECODER(1), |
| 684 | val: ((hsync_offset & 0x3) << 6) | |
| 685 | ((hsync_len >> 4) & 0x3f)); |
| 686 | regmap_write(map: adv7511->regmap, ADV7511_REG_SYNC_DECODER(2), |
| 687 | val: ((hsync_len & 0xf) << 4) | |
| 688 | ((vsync_offset >> 6) & 0xf)); |
| 689 | regmap_write(map: adv7511->regmap, ADV7511_REG_SYNC_DECODER(3), |
| 690 | val: ((vsync_offset & 0x3f) << 2) | |
| 691 | ((vsync_len >> 8) & 0x3)); |
| 692 | regmap_write(map: adv7511->regmap, ADV7511_REG_SYNC_DECODER(4), |
| 693 | val: vsync_len & 0xff); |
| 694 | |
| 695 | hsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PHSYNC); |
| 696 | vsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PVSYNC); |
| 697 | } else { |
| 698 | enum adv7511_sync_polarity mode_hsync_polarity; |
| 699 | enum adv7511_sync_polarity mode_vsync_polarity; |
| 700 | |
| 701 | /** |
| 702 | * If the input signal is always low or always high we want to |
| 703 | * invert or let it passthrough depending on the polarity of the |
| 704 | * current mode. |
| 705 | **/ |
| 706 | if (adj_mode->flags & DRM_MODE_FLAG_NHSYNC) |
| 707 | mode_hsync_polarity = ADV7511_SYNC_POLARITY_LOW; |
| 708 | else |
| 709 | mode_hsync_polarity = ADV7511_SYNC_POLARITY_HIGH; |
| 710 | |
| 711 | if (adj_mode->flags & DRM_MODE_FLAG_NVSYNC) |
| 712 | mode_vsync_polarity = ADV7511_SYNC_POLARITY_LOW; |
| 713 | else |
| 714 | mode_vsync_polarity = ADV7511_SYNC_POLARITY_HIGH; |
| 715 | |
| 716 | if (adv7511->hsync_polarity != mode_hsync_polarity && |
| 717 | adv7511->hsync_polarity != |
| 718 | ADV7511_SYNC_POLARITY_PASSTHROUGH) |
| 719 | hsync_polarity = 1; |
| 720 | |
| 721 | if (adv7511->vsync_polarity != mode_vsync_polarity && |
| 722 | adv7511->vsync_polarity != |
| 723 | ADV7511_SYNC_POLARITY_PASSTHROUGH) |
| 724 | vsync_polarity = 1; |
| 725 | } |
| 726 | |
| 727 | if (drm_mode_vrefresh(mode: adj_mode) <= 24) |
| 728 | low_refresh_rate = ADV7511_LOW_REFRESH_RATE_24HZ; |
| 729 | else if (drm_mode_vrefresh(mode: adj_mode) <= 25) |
| 730 | low_refresh_rate = ADV7511_LOW_REFRESH_RATE_25HZ; |
| 731 | else if (drm_mode_vrefresh(mode: adj_mode) <= 30) |
| 732 | low_refresh_rate = ADV7511_LOW_REFRESH_RATE_30HZ; |
| 733 | else |
| 734 | low_refresh_rate = ADV7511_LOW_REFRESH_RATE_NONE; |
| 735 | |
| 736 | if (adv7511->info->type == ADV7511) |
| 737 | regmap_update_bits(map: adv7511->regmap, reg: 0xfb, |
| 738 | mask: 0x6, val: low_refresh_rate << 1); |
| 739 | else |
| 740 | regmap_update_bits(map: adv7511->regmap, reg: 0x4a, |
| 741 | mask: 0xc, val: low_refresh_rate << 2); |
| 742 | |
| 743 | regmap_update_bits(map: adv7511->regmap, reg: 0x17, |
| 744 | mask: 0x60, val: (vsync_polarity << 6) | (hsync_polarity << 5)); |
| 745 | |
| 746 | drm_mode_copy(dst: &adv7511->curr_mode, src: adj_mode); |
| 747 | |
| 748 | /* Update horizontal/vertical porch params */ |
| 749 | if (adv7511->info->has_dsi && adv7511->use_timing_gen) |
| 750 | adv7533_dsi_config_timing_gen(adv: adv7511); |
| 751 | |
| 752 | /* |
| 753 | * TODO Test first order 4:2:2 to 4:4:4 up conversion method, which is |
| 754 | * supposed to give better results. |
| 755 | */ |
| 756 | |
| 757 | adv7511->f_tmds = adj_mode->clock; |
| 758 | } |
| 759 | |
| 760 | static int adv7511_connector_init(struct adv7511 *adv) |
| 761 | { |
| 762 | struct drm_bridge *bridge = &adv->bridge; |
| 763 | struct drm_connector *connector; |
| 764 | |
| 765 | connector = drm_bridge_connector_init(drm: bridge->dev, encoder: bridge->encoder); |
| 766 | if (IS_ERR(ptr: connector)) { |
| 767 | DRM_ERROR("Failed to initialize connector with drm\n" ); |
| 768 | return PTR_ERR(ptr: connector); |
| 769 | } |
| 770 | |
| 771 | drm_connector_attach_encoder(connector, encoder: bridge->encoder); |
| 772 | |
| 773 | return 0; |
| 774 | } |
| 775 | |
| 776 | /* ----------------------------------------------------------------------------- |
| 777 | * DRM Bridge Operations |
| 778 | */ |
| 779 | |
| 780 | static const struct adv7511 *bridge_to_adv7511_const(const struct drm_bridge *bridge) |
| 781 | { |
| 782 | return container_of(bridge, struct adv7511, bridge); |
| 783 | } |
| 784 | |
| 785 | static void adv7511_bridge_atomic_enable(struct drm_bridge *bridge, |
| 786 | struct drm_atomic_state *state) |
| 787 | { |
| 788 | struct adv7511 *adv = bridge_to_adv7511(bridge); |
| 789 | struct drm_connector *connector; |
| 790 | struct drm_connector_state *conn_state; |
| 791 | struct drm_crtc_state *crtc_state; |
| 792 | |
| 793 | adv7511_power_on(adv7511: adv); |
| 794 | |
| 795 | connector = drm_atomic_get_new_connector_for_encoder(state, encoder: bridge->encoder); |
| 796 | if (WARN_ON(!connector)) |
| 797 | return; |
| 798 | |
| 799 | conn_state = drm_atomic_get_new_connector_state(state, connector); |
| 800 | if (WARN_ON(!conn_state)) |
| 801 | return; |
| 802 | |
| 803 | crtc_state = drm_atomic_get_new_crtc_state(state, crtc: conn_state->crtc); |
| 804 | if (WARN_ON(!crtc_state)) |
| 805 | return; |
| 806 | |
| 807 | adv7511_set_config_csc(adv7511: adv, connector, rgb: adv->rgb); |
| 808 | |
| 809 | adv7511_mode_set(adv7511: adv, adj_mode: &crtc_state->adjusted_mode); |
| 810 | |
| 811 | drm_atomic_helper_connector_hdmi_update_infoframes(connector, state); |
| 812 | } |
| 813 | |
| 814 | static void adv7511_bridge_atomic_disable(struct drm_bridge *bridge, |
| 815 | struct drm_atomic_state *state) |
| 816 | { |
| 817 | struct adv7511 *adv = bridge_to_adv7511(bridge); |
| 818 | |
| 819 | adv7511_power_off(adv7511: adv); |
| 820 | } |
| 821 | |
| 822 | static enum drm_mode_status |
| 823 | adv7511_bridge_hdmi_tmds_char_rate_valid(const struct drm_bridge *bridge, |
| 824 | const struct drm_display_mode *mode, |
| 825 | unsigned long long tmds_rate) |
| 826 | { |
| 827 | const struct adv7511 *adv = bridge_to_adv7511_const(bridge); |
| 828 | |
| 829 | if (tmds_rate > 1000ULL * adv->info->max_mode_clock_khz) |
| 830 | return MODE_CLOCK_HIGH; |
| 831 | |
| 832 | return MODE_OK; |
| 833 | } |
| 834 | |
| 835 | static enum drm_mode_status adv7511_bridge_mode_valid(struct drm_bridge *bridge, |
| 836 | const struct drm_display_info *info, |
| 837 | const struct drm_display_mode *mode) |
| 838 | { |
| 839 | struct adv7511 *adv = bridge_to_adv7511(bridge); |
| 840 | |
| 841 | if (!adv->info->has_dsi) |
| 842 | return MODE_OK; |
| 843 | |
| 844 | return adv7533_mode_valid(adv, mode); |
| 845 | } |
| 846 | |
| 847 | static int adv7511_bridge_attach(struct drm_bridge *bridge, |
| 848 | struct drm_encoder *encoder, |
| 849 | enum drm_bridge_attach_flags flags) |
| 850 | { |
| 851 | struct adv7511 *adv = bridge_to_adv7511(bridge); |
| 852 | int ret = 0; |
| 853 | |
| 854 | if (adv->next_bridge) { |
| 855 | ret = drm_bridge_attach(encoder, bridge: adv->next_bridge, previous: bridge, |
| 856 | flags: flags | DRM_BRIDGE_ATTACH_NO_CONNECTOR); |
| 857 | if (ret) |
| 858 | return ret; |
| 859 | } |
| 860 | |
| 861 | if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)) { |
| 862 | ret = adv7511_connector_init(adv); |
| 863 | if (ret < 0) |
| 864 | return ret; |
| 865 | } |
| 866 | |
| 867 | if (adv->i2c_main->irq) |
| 868 | regmap_write(map: adv->regmap, ADV7511_REG_INT_ENABLE(0), |
| 869 | ADV7511_INT0_HPD); |
| 870 | |
| 871 | return ret; |
| 872 | } |
| 873 | |
| 874 | static enum drm_connector_status |
| 875 | adv7511_bridge_detect(struct drm_bridge *bridge, struct drm_connector *connector) |
| 876 | { |
| 877 | struct adv7511 *adv = bridge_to_adv7511(bridge); |
| 878 | |
| 879 | return adv7511_detect(adv7511: adv); |
| 880 | } |
| 881 | |
| 882 | static const struct drm_edid *adv7511_bridge_edid_read(struct drm_bridge *bridge, |
| 883 | struct drm_connector *connector) |
| 884 | { |
| 885 | struct adv7511 *adv = bridge_to_adv7511(bridge); |
| 886 | |
| 887 | return adv7511_edid_read(adv7511: adv, connector); |
| 888 | } |
| 889 | |
| 890 | static int adv7511_bridge_hdmi_clear_infoframe(struct drm_bridge *bridge, |
| 891 | enum hdmi_infoframe_type type) |
| 892 | { |
| 893 | struct adv7511 *adv7511 = bridge_to_adv7511(bridge); |
| 894 | |
| 895 | switch (type) { |
| 896 | case HDMI_INFOFRAME_TYPE_AUDIO: |
| 897 | adv7511_packet_disable(adv7511, ADV7511_PACKET_ENABLE_AUDIO_INFOFRAME); |
| 898 | break; |
| 899 | case HDMI_INFOFRAME_TYPE_AVI: |
| 900 | adv7511_packet_disable(adv7511, ADV7511_PACKET_ENABLE_AVI_INFOFRAME); |
| 901 | break; |
| 902 | case HDMI_INFOFRAME_TYPE_SPD: |
| 903 | adv7511_packet_disable(adv7511, ADV7511_PACKET_ENABLE_SPD); |
| 904 | break; |
| 905 | case HDMI_INFOFRAME_TYPE_VENDOR: |
| 906 | adv7511_packet_disable(adv7511, ADV7511_PACKET_ENABLE_SPARE1); |
| 907 | break; |
| 908 | default: |
| 909 | drm_dbg_driver(adv7511->bridge.dev, "Unsupported HDMI InfoFrame %x\n" , type); |
| 910 | break; |
| 911 | } |
| 912 | |
| 913 | return 0; |
| 914 | } |
| 915 | |
| 916 | static int adv7511_bridge_hdmi_write_infoframe(struct drm_bridge *bridge, |
| 917 | enum hdmi_infoframe_type type, |
| 918 | const u8 *buffer, size_t len) |
| 919 | { |
| 920 | struct adv7511 *adv7511 = bridge_to_adv7511(bridge); |
| 921 | |
| 922 | switch (type) { |
| 923 | case HDMI_INFOFRAME_TYPE_AUDIO: |
| 924 | /* send current Audio infoframe values while updating */ |
| 925 | regmap_update_bits(map: adv7511->regmap, ADV7511_REG_INFOFRAME_UPDATE, |
| 926 | BIT(5), BIT(5)); |
| 927 | |
| 928 | /* The Audio infoframe id is not configurable */ |
| 929 | regmap_bulk_write(map: adv7511->regmap, ADV7511_REG_AUDIO_INFOFRAME_VERSION, |
| 930 | val: buffer + 1, val_count: len - 1); |
| 931 | |
| 932 | /* use Audio infoframe updated info */ |
| 933 | regmap_update_bits(map: adv7511->regmap, ADV7511_REG_INFOFRAME_UPDATE, |
| 934 | BIT(5), val: 0); |
| 935 | |
| 936 | adv7511_packet_enable(adv7511, ADV7511_PACKET_ENABLE_AUDIO_INFOFRAME); |
| 937 | break; |
| 938 | case HDMI_INFOFRAME_TYPE_AVI: |
| 939 | /* send current AVI infoframe values while updating */ |
| 940 | regmap_update_bits(map: adv7511->regmap, ADV7511_REG_INFOFRAME_UPDATE, |
| 941 | BIT(6), BIT(6)); |
| 942 | |
| 943 | /* The AVI infoframe id is not configurable */ |
| 944 | regmap_bulk_write(map: adv7511->regmap, ADV7511_REG_AVI_INFOFRAME_VERSION, |
| 945 | val: buffer + 1, val_count: len - 1); |
| 946 | |
| 947 | regmap_write(map: adv7511->regmap, ADV7511_REG_AUDIO_INFOFRAME_LENGTH, val: 0x2); |
| 948 | regmap_write(map: adv7511->regmap, ADV7511_REG_AUDIO_INFOFRAME(1), val: 0x1); |
| 949 | |
| 950 | /* use AVI infoframe updated info */ |
| 951 | regmap_update_bits(map: adv7511->regmap, ADV7511_REG_INFOFRAME_UPDATE, |
| 952 | BIT(6), val: 0); |
| 953 | |
| 954 | adv7511_packet_enable(adv7511, ADV7511_PACKET_ENABLE_AVI_INFOFRAME); |
| 955 | break; |
| 956 | case HDMI_INFOFRAME_TYPE_SPD: |
| 957 | adv7511_packet_disable(adv7511, ADV7511_PACKET_ENABLE_SPD); |
| 958 | regmap_bulk_write(map: adv7511->regmap_packet, ADV7511_PACKET_SPD(0), |
| 959 | val: buffer, val_count: len); |
| 960 | adv7511_packet_enable(adv7511, ADV7511_PACKET_ENABLE_SPD); |
| 961 | break; |
| 962 | case HDMI_INFOFRAME_TYPE_VENDOR: |
| 963 | adv7511_packet_disable(adv7511, ADV7511_PACKET_ENABLE_SPARE1); |
| 964 | regmap_bulk_write(map: adv7511->regmap_packet, ADV7511_PACKET_SPARE1(0), |
| 965 | val: buffer, val_count: len); |
| 966 | adv7511_packet_enable(adv7511, ADV7511_PACKET_ENABLE_SPARE1); |
| 967 | break; |
| 968 | default: |
| 969 | drm_dbg_driver(adv7511->bridge.dev, "Unsupported HDMI InfoFrame %x\n" , type); |
| 970 | break; |
| 971 | } |
| 972 | |
| 973 | return 0; |
| 974 | } |
| 975 | |
| 976 | static const struct drm_bridge_funcs adv7511_bridge_funcs = { |
| 977 | .mode_valid = adv7511_bridge_mode_valid, |
| 978 | .attach = adv7511_bridge_attach, |
| 979 | .detect = adv7511_bridge_detect, |
| 980 | .edid_read = adv7511_bridge_edid_read, |
| 981 | |
| 982 | .atomic_enable = adv7511_bridge_atomic_enable, |
| 983 | .atomic_disable = adv7511_bridge_atomic_disable, |
| 984 | .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, |
| 985 | .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, |
| 986 | .atomic_reset = drm_atomic_helper_bridge_reset, |
| 987 | |
| 988 | .hdmi_tmds_char_rate_valid = adv7511_bridge_hdmi_tmds_char_rate_valid, |
| 989 | .hdmi_clear_infoframe = adv7511_bridge_hdmi_clear_infoframe, |
| 990 | .hdmi_write_infoframe = adv7511_bridge_hdmi_write_infoframe, |
| 991 | |
| 992 | .hdmi_audio_startup = adv7511_hdmi_audio_startup, |
| 993 | .hdmi_audio_prepare = adv7511_hdmi_audio_prepare, |
| 994 | .hdmi_audio_shutdown = adv7511_hdmi_audio_shutdown, |
| 995 | |
| 996 | .hdmi_cec_init = adv7511_cec_init, |
| 997 | .hdmi_cec_enable = adv7511_cec_enable, |
| 998 | .hdmi_cec_log_addr = adv7511_cec_log_addr, |
| 999 | .hdmi_cec_transmit = adv7511_cec_transmit, |
| 1000 | }; |
| 1001 | |
| 1002 | /* ----------------------------------------------------------------------------- |
| 1003 | * Probe & remove |
| 1004 | */ |
| 1005 | |
| 1006 | static const char * const adv7511_supply_names[] = { |
| 1007 | "avdd" , |
| 1008 | "dvdd" , |
| 1009 | "pvdd" , |
| 1010 | "bgvdd" , |
| 1011 | "dvdd-3v" , |
| 1012 | }; |
| 1013 | |
| 1014 | static const char * const adv7533_supply_names[] = { |
| 1015 | "avdd" , |
| 1016 | "dvdd" , |
| 1017 | "pvdd" , |
| 1018 | "a2vdd" , |
| 1019 | "v3p3" , |
| 1020 | "v1p2" , |
| 1021 | }; |
| 1022 | |
| 1023 | static int adv7511_init_regulators(struct adv7511 *adv) |
| 1024 | { |
| 1025 | const char * const *supply_names = adv->info->supply_names; |
| 1026 | unsigned int num_supplies = adv->info->num_supplies; |
| 1027 | struct device *dev = &adv->i2c_main->dev; |
| 1028 | unsigned int i; |
| 1029 | int ret; |
| 1030 | |
| 1031 | adv->supplies = devm_kcalloc(dev, n: num_supplies, |
| 1032 | size: sizeof(*adv->supplies), GFP_KERNEL); |
| 1033 | if (!adv->supplies) |
| 1034 | return -ENOMEM; |
| 1035 | |
| 1036 | for (i = 0; i < num_supplies; i++) |
| 1037 | adv->supplies[i].supply = supply_names[i]; |
| 1038 | |
| 1039 | ret = devm_regulator_bulk_get(dev, num_consumers: num_supplies, consumers: adv->supplies); |
| 1040 | if (ret) |
| 1041 | return ret; |
| 1042 | |
| 1043 | return regulator_bulk_enable(num_consumers: num_supplies, consumers: adv->supplies); |
| 1044 | } |
| 1045 | |
| 1046 | static void adv7511_uninit_regulators(struct adv7511 *adv) |
| 1047 | { |
| 1048 | regulator_bulk_disable(num_consumers: adv->info->num_supplies, consumers: adv->supplies); |
| 1049 | } |
| 1050 | |
| 1051 | static bool adv7511_cec_register_volatile(struct device *dev, unsigned int reg) |
| 1052 | { |
| 1053 | struct i2c_client *i2c = to_i2c_client(dev); |
| 1054 | struct adv7511 *adv7511 = i2c_get_clientdata(client: i2c); |
| 1055 | |
| 1056 | reg -= adv7511->info->reg_cec_offset; |
| 1057 | |
| 1058 | switch (reg) { |
| 1059 | case ADV7511_REG_CEC_RX1_FRAME_HDR: |
| 1060 | case ADV7511_REG_CEC_RX1_FRAME_DATA0 ... ADV7511_REG_CEC_RX1_FRAME_DATA0 + 14: |
| 1061 | case ADV7511_REG_CEC_RX1_FRAME_LEN: |
| 1062 | case ADV7511_REG_CEC_RX2_FRAME_HDR: |
| 1063 | case ADV7511_REG_CEC_RX2_FRAME_DATA0 ... ADV7511_REG_CEC_RX2_FRAME_DATA0 + 14: |
| 1064 | case ADV7511_REG_CEC_RX2_FRAME_LEN: |
| 1065 | case ADV7511_REG_CEC_RX3_FRAME_HDR: |
| 1066 | case ADV7511_REG_CEC_RX3_FRAME_DATA0 ... ADV7511_REG_CEC_RX3_FRAME_DATA0 + 14: |
| 1067 | case ADV7511_REG_CEC_RX3_FRAME_LEN: |
| 1068 | case ADV7511_REG_CEC_RX_STATUS: |
| 1069 | case ADV7511_REG_CEC_RX_BUFFERS: |
| 1070 | case ADV7511_REG_CEC_TX_LOW_DRV_CNT: |
| 1071 | return true; |
| 1072 | } |
| 1073 | |
| 1074 | return false; |
| 1075 | } |
| 1076 | |
| 1077 | static const struct regmap_config adv7511_cec_regmap_config = { |
| 1078 | .reg_bits = 8, |
| 1079 | .val_bits = 8, |
| 1080 | |
| 1081 | .max_register = 0xff, |
| 1082 | .cache_type = REGCACHE_MAPLE, |
| 1083 | .volatile_reg = adv7511_cec_register_volatile, |
| 1084 | }; |
| 1085 | |
| 1086 | static int adv7511_init_cec_regmap(struct adv7511 *adv) |
| 1087 | { |
| 1088 | int ret; |
| 1089 | |
| 1090 | adv->i2c_cec = i2c_new_ancillary_device(client: adv->i2c_main, name: "cec" , |
| 1091 | ADV7511_CEC_I2C_ADDR_DEFAULT); |
| 1092 | if (IS_ERR(ptr: adv->i2c_cec)) |
| 1093 | return PTR_ERR(ptr: adv->i2c_cec); |
| 1094 | |
| 1095 | regmap_write(map: adv->regmap, ADV7511_REG_CEC_I2C_ADDR, |
| 1096 | val: adv->i2c_cec->addr << 1); |
| 1097 | |
| 1098 | i2c_set_clientdata(client: adv->i2c_cec, data: adv); |
| 1099 | |
| 1100 | adv->regmap_cec = devm_regmap_init_i2c(adv->i2c_cec, |
| 1101 | &adv7511_cec_regmap_config); |
| 1102 | if (IS_ERR(ptr: adv->regmap_cec)) { |
| 1103 | ret = PTR_ERR(ptr: adv->regmap_cec); |
| 1104 | goto err; |
| 1105 | } |
| 1106 | |
| 1107 | if (adv->info->reg_cec_offset == ADV7533_REG_CEC_OFFSET) { |
| 1108 | ret = adv7533_patch_cec_registers(adv); |
| 1109 | if (ret) |
| 1110 | goto err; |
| 1111 | } |
| 1112 | |
| 1113 | return 0; |
| 1114 | err: |
| 1115 | i2c_unregister_device(client: adv->i2c_cec); |
| 1116 | return ret; |
| 1117 | } |
| 1118 | |
| 1119 | static int adv7511_parse_dt(struct device_node *np, |
| 1120 | struct adv7511_link_config *config) |
| 1121 | { |
| 1122 | const char *str; |
| 1123 | int ret; |
| 1124 | |
| 1125 | of_property_read_u32(np, propname: "adi,input-depth" , out_value: &config->input_color_depth); |
| 1126 | if (config->input_color_depth != 8 && config->input_color_depth != 10 && |
| 1127 | config->input_color_depth != 12) |
| 1128 | return -EINVAL; |
| 1129 | |
| 1130 | ret = of_property_read_string(np, propname: "adi,input-colorspace" , out_string: &str); |
| 1131 | if (ret < 0) |
| 1132 | return ret; |
| 1133 | |
| 1134 | if (!strcmp(str, "rgb" )) |
| 1135 | config->input_colorspace = HDMI_COLORSPACE_RGB; |
| 1136 | else if (!strcmp(str, "yuv422" )) |
| 1137 | config->input_colorspace = HDMI_COLORSPACE_YUV422; |
| 1138 | else if (!strcmp(str, "yuv444" )) |
| 1139 | config->input_colorspace = HDMI_COLORSPACE_YUV444; |
| 1140 | else |
| 1141 | return -EINVAL; |
| 1142 | |
| 1143 | ret = of_property_read_string(np, propname: "adi,input-clock" , out_string: &str); |
| 1144 | if (ret < 0) |
| 1145 | return ret; |
| 1146 | |
| 1147 | if (!strcmp(str, "1x" )) |
| 1148 | config->input_clock = ADV7511_INPUT_CLOCK_1X; |
| 1149 | else if (!strcmp(str, "2x" )) |
| 1150 | config->input_clock = ADV7511_INPUT_CLOCK_2X; |
| 1151 | else if (!strcmp(str, "ddr" )) |
| 1152 | config->input_clock = ADV7511_INPUT_CLOCK_DDR; |
| 1153 | else |
| 1154 | return -EINVAL; |
| 1155 | |
| 1156 | if (config->input_colorspace == HDMI_COLORSPACE_YUV422 || |
| 1157 | config->input_clock != ADV7511_INPUT_CLOCK_1X) { |
| 1158 | ret = of_property_read_u32(np, propname: "adi,input-style" , |
| 1159 | out_value: &config->input_style); |
| 1160 | if (ret) |
| 1161 | return ret; |
| 1162 | |
| 1163 | if (config->input_style < 1 || config->input_style > 3) |
| 1164 | return -EINVAL; |
| 1165 | |
| 1166 | ret = of_property_read_string(np, propname: "adi,input-justification" , |
| 1167 | out_string: &str); |
| 1168 | if (ret < 0) |
| 1169 | return ret; |
| 1170 | |
| 1171 | if (!strcmp(str, "left" )) |
| 1172 | config->input_justification = |
| 1173 | ADV7511_INPUT_JUSTIFICATION_LEFT; |
| 1174 | else if (!strcmp(str, "evenly" )) |
| 1175 | config->input_justification = |
| 1176 | ADV7511_INPUT_JUSTIFICATION_EVENLY; |
| 1177 | else if (!strcmp(str, "right" )) |
| 1178 | config->input_justification = |
| 1179 | ADV7511_INPUT_JUSTIFICATION_RIGHT; |
| 1180 | else |
| 1181 | return -EINVAL; |
| 1182 | |
| 1183 | } else { |
| 1184 | config->input_style = 1; |
| 1185 | config->input_justification = ADV7511_INPUT_JUSTIFICATION_LEFT; |
| 1186 | } |
| 1187 | |
| 1188 | of_property_read_u32(np, propname: "adi,clock-delay" , out_value: &config->clock_delay); |
| 1189 | if (config->clock_delay < -1200 || config->clock_delay > 1600) |
| 1190 | return -EINVAL; |
| 1191 | |
| 1192 | config->embedded_sync = of_property_read_bool(np, propname: "adi,embedded-sync" ); |
| 1193 | |
| 1194 | /* Hardcode the sync pulse configurations for now. */ |
| 1195 | config->sync_pulse = ADV7511_INPUT_SYNC_PULSE_NONE; |
| 1196 | config->vsync_polarity = ADV7511_SYNC_POLARITY_PASSTHROUGH; |
| 1197 | config->hsync_polarity = ADV7511_SYNC_POLARITY_PASSTHROUGH; |
| 1198 | |
| 1199 | return 0; |
| 1200 | } |
| 1201 | |
| 1202 | static int adv7511_probe(struct i2c_client *i2c) |
| 1203 | { |
| 1204 | struct adv7511_link_config link_config; |
| 1205 | struct adv7511 *adv7511; |
| 1206 | struct device *dev = &i2c->dev; |
| 1207 | unsigned int val; |
| 1208 | int ret; |
| 1209 | |
| 1210 | if (!dev->of_node) |
| 1211 | return -EINVAL; |
| 1212 | |
| 1213 | adv7511 = devm_drm_bridge_alloc(dev, struct adv7511, bridge, |
| 1214 | &adv7511_bridge_funcs); |
| 1215 | if (IS_ERR(ptr: adv7511)) |
| 1216 | return PTR_ERR(ptr: adv7511); |
| 1217 | |
| 1218 | adv7511->i2c_main = i2c; |
| 1219 | adv7511->powered = false; |
| 1220 | adv7511->status = connector_status_disconnected; |
| 1221 | adv7511->info = i2c_get_match_data(client: i2c); |
| 1222 | |
| 1223 | memset(&link_config, 0, sizeof(link_config)); |
| 1224 | |
| 1225 | ret = drm_of_find_panel_or_bridge(np: dev->of_node, port: 1, endpoint: -1, NULL, |
| 1226 | bridge: &adv7511->next_bridge); |
| 1227 | if (ret && ret != -ENODEV) |
| 1228 | return ret; |
| 1229 | |
| 1230 | if (adv7511->info->link_config) |
| 1231 | ret = adv7511_parse_dt(np: dev->of_node, config: &link_config); |
| 1232 | else |
| 1233 | ret = adv7533_parse_dt(np: dev->of_node, adv: adv7511); |
| 1234 | if (ret) |
| 1235 | return ret; |
| 1236 | |
| 1237 | ret = adv7511_init_regulators(adv: adv7511); |
| 1238 | if (ret) { |
| 1239 | dev_err_probe(dev, err: ret, fmt: "failed to init regulators\n" ); |
| 1240 | goto err_of_node_put; |
| 1241 | } |
| 1242 | |
| 1243 | /* |
| 1244 | * The power down GPIO is optional. If present, toggle it from active to |
| 1245 | * inactive to wake up the encoder. |
| 1246 | */ |
| 1247 | adv7511->gpio_pd = devm_gpiod_get_optional(dev, con_id: "pd" , flags: GPIOD_OUT_HIGH); |
| 1248 | if (IS_ERR(ptr: adv7511->gpio_pd)) { |
| 1249 | ret = PTR_ERR(ptr: adv7511->gpio_pd); |
| 1250 | goto uninit_regulators; |
| 1251 | } |
| 1252 | |
| 1253 | if (adv7511->gpio_pd) { |
| 1254 | usleep_range(min: 5000, max: 6000); |
| 1255 | gpiod_set_value_cansleep(desc: adv7511->gpio_pd, value: 0); |
| 1256 | } |
| 1257 | |
| 1258 | adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config); |
| 1259 | if (IS_ERR(ptr: adv7511->regmap)) { |
| 1260 | ret = PTR_ERR(ptr: adv7511->regmap); |
| 1261 | goto uninit_regulators; |
| 1262 | } |
| 1263 | |
| 1264 | ret = regmap_read(map: adv7511->regmap, ADV7511_REG_CHIP_REVISION, val: &val); |
| 1265 | if (ret) |
| 1266 | goto uninit_regulators; |
| 1267 | dev_dbg(dev, "Rev. %d\n" , val); |
| 1268 | |
| 1269 | if (adv7511->info->type == ADV7511) |
| 1270 | ret = regmap_register_patch(map: adv7511->regmap, |
| 1271 | regs: adv7511_fixed_registers, |
| 1272 | ARRAY_SIZE(adv7511_fixed_registers)); |
| 1273 | else |
| 1274 | ret = adv7533_patch_registers(adv: adv7511); |
| 1275 | if (ret) |
| 1276 | goto uninit_regulators; |
| 1277 | |
| 1278 | adv7511_packet_disable(adv7511, packet: 0xffff); |
| 1279 | |
| 1280 | adv7511->i2c_edid = i2c_new_ancillary_device(client: i2c, name: "edid" , |
| 1281 | ADV7511_EDID_I2C_ADDR_DEFAULT); |
| 1282 | if (IS_ERR(ptr: adv7511->i2c_edid)) { |
| 1283 | ret = PTR_ERR(ptr: adv7511->i2c_edid); |
| 1284 | goto uninit_regulators; |
| 1285 | } |
| 1286 | |
| 1287 | regmap_write(map: adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, |
| 1288 | val: adv7511->i2c_edid->addr << 1); |
| 1289 | |
| 1290 | adv7511->i2c_packet = i2c_new_ancillary_device(client: i2c, name: "packet" , |
| 1291 | ADV7511_PACKET_I2C_ADDR_DEFAULT); |
| 1292 | if (IS_ERR(ptr: adv7511->i2c_packet)) { |
| 1293 | ret = PTR_ERR(ptr: adv7511->i2c_packet); |
| 1294 | goto err_i2c_unregister_edid; |
| 1295 | } |
| 1296 | |
| 1297 | adv7511->regmap_packet = devm_regmap_init_i2c(adv7511->i2c_packet, |
| 1298 | &adv7511_packet_config); |
| 1299 | if (IS_ERR(ptr: adv7511->regmap_packet)) { |
| 1300 | ret = PTR_ERR(ptr: adv7511->regmap_packet); |
| 1301 | goto err_i2c_unregister_packet; |
| 1302 | } |
| 1303 | |
| 1304 | regmap_write(map: adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR, |
| 1305 | val: adv7511->i2c_packet->addr << 1); |
| 1306 | |
| 1307 | ret = adv7511_init_cec_regmap(adv: adv7511); |
| 1308 | if (ret) |
| 1309 | goto err_i2c_unregister_packet; |
| 1310 | |
| 1311 | INIT_WORK(&adv7511->hpd_work, adv7511_hpd_work); |
| 1312 | |
| 1313 | adv7511_power_off(adv7511); |
| 1314 | |
| 1315 | i2c_set_clientdata(client: i2c, data: adv7511); |
| 1316 | |
| 1317 | if (adv7511->info->link_config) |
| 1318 | adv7511_set_link_config(adv7511, config: &link_config); |
| 1319 | |
| 1320 | regmap_write(map: adv7511->regmap, ADV7511_REG_CEC_CTRL, |
| 1321 | ADV7511_CEC_CTRL_POWER_DOWN); |
| 1322 | |
| 1323 | adv7511->bridge.ops = DRM_BRIDGE_OP_DETECT | |
| 1324 | DRM_BRIDGE_OP_EDID | |
| 1325 | DRM_BRIDGE_OP_HDMI; |
| 1326 | if (adv7511->i2c_main->irq) |
| 1327 | adv7511->bridge.ops |= DRM_BRIDGE_OP_HPD; |
| 1328 | |
| 1329 | adv7511->bridge.vendor = "Analog" ; |
| 1330 | adv7511->bridge.product = adv7511->info->name; |
| 1331 | |
| 1332 | #ifdef CONFIG_DRM_I2C_ADV7511_AUDIO |
| 1333 | adv7511->bridge.ops |= DRM_BRIDGE_OP_HDMI_AUDIO; |
| 1334 | adv7511->bridge.hdmi_audio_dev = dev; |
| 1335 | adv7511->bridge.hdmi_audio_max_i2s_playback_channels = 2; |
| 1336 | adv7511->bridge.hdmi_audio_i2s_formats = (SNDRV_PCM_FMTBIT_S16_LE | |
| 1337 | SNDRV_PCM_FMTBIT_S20_3LE | |
| 1338 | SNDRV_PCM_FMTBIT_S24_3LE | |
| 1339 | SNDRV_PCM_FMTBIT_S24_LE | |
| 1340 | SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE), |
| 1341 | adv7511->bridge.hdmi_audio_spdif_playback = 1; |
| 1342 | adv7511->bridge.hdmi_audio_dai_port = 2; |
| 1343 | #endif |
| 1344 | |
| 1345 | #ifdef CONFIG_DRM_I2C_ADV7511_CEC |
| 1346 | adv7511->bridge.ops |= DRM_BRIDGE_OP_HDMI_CEC_ADAPTER; |
| 1347 | adv7511->bridge.hdmi_cec_dev = dev; |
| 1348 | adv7511->bridge.hdmi_cec_adapter_name = dev_name(dev); |
| 1349 | adv7511->bridge.hdmi_cec_available_las = ADV7511_MAX_ADDRS; |
| 1350 | #endif |
| 1351 | |
| 1352 | adv7511->bridge.of_node = dev->of_node; |
| 1353 | adv7511->bridge.type = DRM_MODE_CONNECTOR_HDMIA; |
| 1354 | |
| 1355 | drm_bridge_add(bridge: &adv7511->bridge); |
| 1356 | |
| 1357 | if (i2c->irq) { |
| 1358 | init_waitqueue_head(&adv7511->wq); |
| 1359 | |
| 1360 | ret = devm_request_threaded_irq(dev, irq: i2c->irq, NULL, |
| 1361 | thread_fn: adv7511_irq_handler, |
| 1362 | IRQF_ONESHOT | IRQF_SHARED, |
| 1363 | devname: dev_name(dev), |
| 1364 | dev_id: adv7511); |
| 1365 | if (ret) |
| 1366 | goto err_unregister_audio; |
| 1367 | } |
| 1368 | |
| 1369 | if (adv7511->info->has_dsi) { |
| 1370 | ret = adv7533_attach_dsi(adv: adv7511); |
| 1371 | if (ret) |
| 1372 | goto err_unregister_audio; |
| 1373 | } |
| 1374 | |
| 1375 | return 0; |
| 1376 | |
| 1377 | err_unregister_audio: |
| 1378 | drm_bridge_remove(bridge: &adv7511->bridge); |
| 1379 | i2c_unregister_device(client: adv7511->i2c_cec); |
| 1380 | clk_disable_unprepare(clk: adv7511->cec_clk); |
| 1381 | err_i2c_unregister_packet: |
| 1382 | i2c_unregister_device(client: adv7511->i2c_packet); |
| 1383 | err_i2c_unregister_edid: |
| 1384 | i2c_unregister_device(client: adv7511->i2c_edid); |
| 1385 | uninit_regulators: |
| 1386 | adv7511_uninit_regulators(adv: adv7511); |
| 1387 | err_of_node_put: |
| 1388 | of_node_put(node: adv7511->host_node); |
| 1389 | |
| 1390 | return ret; |
| 1391 | } |
| 1392 | |
| 1393 | static void adv7511_remove(struct i2c_client *i2c) |
| 1394 | { |
| 1395 | struct adv7511 *adv7511 = i2c_get_clientdata(client: i2c); |
| 1396 | |
| 1397 | of_node_put(node: adv7511->host_node); |
| 1398 | |
| 1399 | adv7511_uninit_regulators(adv: adv7511); |
| 1400 | |
| 1401 | drm_bridge_remove(bridge: &adv7511->bridge); |
| 1402 | |
| 1403 | i2c_unregister_device(client: adv7511->i2c_cec); |
| 1404 | clk_disable_unprepare(clk: adv7511->cec_clk); |
| 1405 | |
| 1406 | i2c_unregister_device(client: adv7511->i2c_packet); |
| 1407 | i2c_unregister_device(client: adv7511->i2c_edid); |
| 1408 | } |
| 1409 | |
| 1410 | static const struct adv7511_chip_info adv7511_chip_info = { |
| 1411 | .type = ADV7511, |
| 1412 | .name = "ADV7511" , |
| 1413 | .max_mode_clock_khz = 165000, |
| 1414 | .supply_names = adv7511_supply_names, |
| 1415 | .num_supplies = ARRAY_SIZE(adv7511_supply_names), |
| 1416 | .link_config = true, |
| 1417 | }; |
| 1418 | |
| 1419 | static const struct adv7511_chip_info adv7533_chip_info = { |
| 1420 | .type = ADV7533, |
| 1421 | .name = "ADV7533" , |
| 1422 | .max_mode_clock_khz = 80000, |
| 1423 | .max_lane_freq_khz = 800000, |
| 1424 | .supply_names = adv7533_supply_names, |
| 1425 | .num_supplies = ARRAY_SIZE(adv7533_supply_names), |
| 1426 | .reg_cec_offset = ADV7533_REG_CEC_OFFSET, |
| 1427 | .has_dsi = true, |
| 1428 | }; |
| 1429 | |
| 1430 | static const struct adv7511_chip_info adv7535_chip_info = { |
| 1431 | .type = ADV7535, |
| 1432 | .name = "ADV7535" , |
| 1433 | .max_mode_clock_khz = 148500, |
| 1434 | .max_lane_freq_khz = 891000, |
| 1435 | .supply_names = adv7533_supply_names, |
| 1436 | .num_supplies = ARRAY_SIZE(adv7533_supply_names), |
| 1437 | .reg_cec_offset = ADV7533_REG_CEC_OFFSET, |
| 1438 | .has_dsi = true, |
| 1439 | .hpd_override_enable = true, |
| 1440 | }; |
| 1441 | |
| 1442 | static const struct i2c_device_id adv7511_i2c_ids[] = { |
| 1443 | { "adv7511" , (kernel_ulong_t)&adv7511_chip_info }, |
| 1444 | { "adv7511w" , (kernel_ulong_t)&adv7511_chip_info }, |
| 1445 | { "adv7513" , (kernel_ulong_t)&adv7511_chip_info }, |
| 1446 | { "adv7533" , (kernel_ulong_t)&adv7533_chip_info }, |
| 1447 | { "adv7535" , (kernel_ulong_t)&adv7535_chip_info }, |
| 1448 | { } |
| 1449 | }; |
| 1450 | MODULE_DEVICE_TABLE(i2c, adv7511_i2c_ids); |
| 1451 | |
| 1452 | static const struct of_device_id adv7511_of_ids[] = { |
| 1453 | { .compatible = "adi,adv7511" , .data = &adv7511_chip_info }, |
| 1454 | { .compatible = "adi,adv7511w" , .data = &adv7511_chip_info }, |
| 1455 | { .compatible = "adi,adv7513" , .data = &adv7511_chip_info }, |
| 1456 | { .compatible = "adi,adv7533" , .data = &adv7533_chip_info }, |
| 1457 | { .compatible = "adi,adv7535" , .data = &adv7535_chip_info }, |
| 1458 | { } |
| 1459 | }; |
| 1460 | MODULE_DEVICE_TABLE(of, adv7511_of_ids); |
| 1461 | |
| 1462 | static struct mipi_dsi_driver adv7533_dsi_driver = { |
| 1463 | .driver.name = "adv7533" , |
| 1464 | }; |
| 1465 | |
| 1466 | static struct i2c_driver adv7511_driver = { |
| 1467 | .driver = { |
| 1468 | .name = "adv7511" , |
| 1469 | .of_match_table = adv7511_of_ids, |
| 1470 | }, |
| 1471 | .id_table = adv7511_i2c_ids, |
| 1472 | .probe = adv7511_probe, |
| 1473 | .remove = adv7511_remove, |
| 1474 | }; |
| 1475 | |
| 1476 | static int __init adv7511_init(void) |
| 1477 | { |
| 1478 | int ret; |
| 1479 | |
| 1480 | if (IS_ENABLED(CONFIG_DRM_MIPI_DSI)) { |
| 1481 | ret = mipi_dsi_driver_register(&adv7533_dsi_driver); |
| 1482 | if (ret) |
| 1483 | return ret; |
| 1484 | } |
| 1485 | |
| 1486 | ret = i2c_add_driver(&adv7511_driver); |
| 1487 | if (ret) { |
| 1488 | if (IS_ENABLED(CONFIG_DRM_MIPI_DSI)) |
| 1489 | mipi_dsi_driver_unregister(driver: &adv7533_dsi_driver); |
| 1490 | } |
| 1491 | |
| 1492 | return ret; |
| 1493 | } |
| 1494 | module_init(adv7511_init); |
| 1495 | |
| 1496 | static void __exit adv7511_exit(void) |
| 1497 | { |
| 1498 | i2c_del_driver(driver: &adv7511_driver); |
| 1499 | |
| 1500 | if (IS_ENABLED(CONFIG_DRM_MIPI_DSI)) |
| 1501 | mipi_dsi_driver_unregister(driver: &adv7533_dsi_driver); |
| 1502 | } |
| 1503 | module_exit(adv7511_exit); |
| 1504 | |
| 1505 | MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>" ); |
| 1506 | MODULE_DESCRIPTION("ADV7511 HDMI transmitter driver" ); |
| 1507 | MODULE_LICENSE("GPL" ); |
| 1508 | |