| 1 | /* SPDX-License-Identifier: GPL-2.0-or-later */ |
|---|
| 2 | /* |
|---|
| 3 | * max8973-regulator.h -- MAXIM 8973 regulator |
|---|
| 4 | * |
|---|
| 5 | * Interface for regulator driver for MAXIM 8973 DC-DC step-down |
|---|
| 6 | * switching regulator. |
|---|
| 7 | * |
|---|
| 8 | * Copyright (C) 2012 NVIDIA Corporation |
|---|
| 9 | |
|---|
| 10 | * Author: Laxman Dewangan <ldewangan@nvidia.com> |
|---|
| 11 | */ |
|---|
| 12 | |
|---|
| 13 | #ifndef __LINUX_REGULATOR_MAX8973_H |
|---|
| 14 | #define __LINUX_REGULATOR_MAX8973_H |
|---|
| 15 | |
|---|
| 16 | /* |
|---|
| 17 | * Control flags for configuration of the device. |
|---|
| 18 | * Client need to pass this information with ORed |
|---|
| 19 | */ |
|---|
| 20 | #define MAX8973_CONTROL_REMOTE_SENSE_ENABLE 0x00000001 |
|---|
| 21 | #define MAX8973_CONTROL_FALLING_SLEW_RATE_ENABLE 0x00000002 |
|---|
| 22 | #define MAX8973_CONTROL_OUTPUT_ACTIVE_DISCH_ENABLE 0x00000004 |
|---|
| 23 | #define MAX8973_CONTROL_BIAS_ENABLE 0x00000008 |
|---|
| 24 | #define MAX8973_CONTROL_PULL_DOWN_ENABLE 0x00000010 |
|---|
| 25 | #define MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE 0x00000020 |
|---|
| 26 | |
|---|
| 27 | #define MAX8973_CONTROL_CLKADV_TRIP_DISABLED 0x00000000 |
|---|
| 28 | #define MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US 0x00010000 |
|---|
| 29 | #define MAX8973_CONTROL_CLKADV_TRIP_150mV_PER_US 0x00020000 |
|---|
| 30 | #define MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US_HIST_DIS 0x00030000 |
|---|
| 31 | |
|---|
| 32 | #define MAX8973_CONTROL_INDUCTOR_VALUE_NOMINAL 0x00000000 |
|---|
| 33 | #define MAX8973_CONTROL_INDUCTOR_VALUE_MINUS_30_PER 0x00100000 |
|---|
| 34 | #define MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_30_PER 0x00200000 |
|---|
| 35 | #define MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_60_PER 0x00300000 |
|---|
| 36 | |
|---|
| 37 | /* |
|---|
| 38 | * struct max8973_regulator_platform_data - max8973 regulator platform data. |
|---|
| 39 | * |
|---|
| 40 | * @reg_init_data: The regulator init data. |
|---|
| 41 | * @control_flags: Control flags which are ORed value of above flags to |
|---|
| 42 | * configure device. |
|---|
| 43 | * @junction_temp_warning: Junction temp in millicelcius on which warning need |
|---|
| 44 | * to be set. Thermal functionality is only supported on |
|---|
| 45 | * MAX77621. The threshold warning supported by MAX77621 |
|---|
| 46 | * are 120C and 140C. |
|---|
| 47 | * @enable_ext_control: Enable the voltage enable/disable through external |
|---|
| 48 | * control signal from EN input pin. If it is false then |
|---|
| 49 | * voltage output will be enabled/disabled through EN bit of |
|---|
| 50 | * device register. |
|---|
| 51 | * @dvs_def_state: Default state of dvs. 1 if it is high else 0. |
|---|
| 52 | */ |
|---|
| 53 | struct max8973_regulator_platform_data { |
|---|
| 54 | struct regulator_init_data *reg_init_data; |
|---|
| 55 | unsigned long control_flags; |
|---|
| 56 | unsigned long junction_temp_warning; |
|---|
| 57 | bool enable_ext_control; |
|---|
| 58 | unsigned dvs_def_state:1; |
|---|
| 59 | }; |
|---|
| 60 | |
|---|
| 61 | #endif /* __LINUX_REGULATOR_MAX8973_H */ |
|---|
| 62 | |
|---|
