| 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
| 2 | /* |
| 3 | * Support for SATA devices on Serial Attached SCSI (SAS) controllers |
| 4 | * |
| 5 | * Copyright (C) 2006 IBM Corporation |
| 6 | * |
| 7 | * Written by: Darrick J. Wong <djwong@us.ibm.com>, IBM Corporation |
| 8 | */ |
| 9 | |
| 10 | #include <linux/scatterlist.h> |
| 11 | #include <linux/slab.h> |
| 12 | #include <linux/async.h> |
| 13 | #include <linux/export.h> |
| 14 | |
| 15 | #include <scsi/sas_ata.h> |
| 16 | #include "sas_internal.h" |
| 17 | #include <scsi/scsi_host.h> |
| 18 | #include <scsi/scsi_device.h> |
| 19 | #include <scsi/scsi_tcq.h> |
| 20 | #include <scsi/scsi.h> |
| 21 | #include <scsi/scsi_transport.h> |
| 22 | #include <scsi/scsi_transport_sas.h> |
| 23 | #include "scsi_sas_internal.h" |
| 24 | #include "scsi_transport_api.h" |
| 25 | #include <scsi/scsi_eh.h> |
| 26 | |
| 27 | static enum ata_completion_errors sas_to_ata_err(struct task_status_struct *ts) |
| 28 | { |
| 29 | /* Cheesy attempt to translate SAS errors into ATA. Hah! */ |
| 30 | |
| 31 | /* transport error */ |
| 32 | if (ts->resp == SAS_TASK_UNDELIVERED) |
| 33 | return AC_ERR_ATA_BUS; |
| 34 | |
| 35 | /* ts->resp == SAS_TASK_COMPLETE */ |
| 36 | /* task delivered, what happened afterwards? */ |
| 37 | switch (ts->stat) { |
| 38 | case SAS_DEV_NO_RESPONSE: |
| 39 | return AC_ERR_TIMEOUT; |
| 40 | case SAS_INTERRUPTED: |
| 41 | case SAS_PHY_DOWN: |
| 42 | case SAS_NAK_R_ERR: |
| 43 | return AC_ERR_ATA_BUS; |
| 44 | case SAS_DATA_UNDERRUN: |
| 45 | /* |
| 46 | * Some programs that use the taskfile interface |
| 47 | * (smartctl in particular) can cause underrun |
| 48 | * problems. Ignore these errors, perhaps at our |
| 49 | * peril. |
| 50 | */ |
| 51 | return 0; |
| 52 | case SAS_DATA_OVERRUN: |
| 53 | case SAS_QUEUE_FULL: |
| 54 | case SAS_DEVICE_UNKNOWN: |
| 55 | case SAS_OPEN_TO: |
| 56 | case SAS_OPEN_REJECT: |
| 57 | pr_warn("%s: Saw error %d. What to do?\n" , |
| 58 | __func__, ts->stat); |
| 59 | return AC_ERR_OTHER; |
| 60 | case SAM_STAT_CHECK_CONDITION: |
| 61 | case SAS_ABORTED_TASK: |
| 62 | return AC_ERR_DEV; |
| 63 | case SAS_PROTO_RESPONSE: |
| 64 | /* This means the ending_fis has the error |
| 65 | * value; return 0 here to collect it |
| 66 | */ |
| 67 | return 0; |
| 68 | default: |
| 69 | return 0; |
| 70 | } |
| 71 | } |
| 72 | |
| 73 | static void sas_ata_task_done(struct sas_task *task) |
| 74 | { |
| 75 | struct ata_queued_cmd *qc = task->uldd_task; |
| 76 | struct domain_device *dev = task->dev; |
| 77 | struct task_status_struct *stat = &task->task_status; |
| 78 | struct ata_task_resp *resp = (struct ata_task_resp *)stat->buf; |
| 79 | struct sas_ha_struct *sas_ha = dev->port->ha; |
| 80 | enum ata_completion_errors ac; |
| 81 | unsigned long flags; |
| 82 | struct ata_link *link; |
| 83 | struct ata_port *ap; |
| 84 | |
| 85 | spin_lock_irqsave(&dev->done_lock, flags); |
| 86 | if (test_bit(SAS_HA_FROZEN, &sas_ha->state)) |
| 87 | task = NULL; |
| 88 | else if (qc && qc->scsicmd) |
| 89 | ASSIGN_SAS_TASK(qc->scsicmd, NULL); |
| 90 | spin_unlock_irqrestore(lock: &dev->done_lock, flags); |
| 91 | |
| 92 | /* check if libsas-eh got to the task before us */ |
| 93 | if (unlikely(!task)) |
| 94 | return; |
| 95 | |
| 96 | if (!qc) |
| 97 | goto qc_already_gone; |
| 98 | |
| 99 | ap = qc->ap; |
| 100 | link = &ap->link; |
| 101 | |
| 102 | spin_lock_irqsave(ap->lock, flags); |
| 103 | /* check if we lost the race with libata/sas_ata_post_internal() */ |
| 104 | if (unlikely(ata_port_is_frozen(ap))) { |
| 105 | spin_unlock_irqrestore(lock: ap->lock, flags); |
| 106 | if (qc->scsicmd) |
| 107 | goto qc_already_gone; |
| 108 | else { |
| 109 | /* if eh is not involved and the port is frozen then the |
| 110 | * ata internal abort process has taken responsibility |
| 111 | * for this sas_task |
| 112 | */ |
| 113 | return; |
| 114 | } |
| 115 | } |
| 116 | |
| 117 | if (stat->stat == SAS_PROTO_RESPONSE || |
| 118 | stat->stat == SAS_SAM_STAT_GOOD || |
| 119 | (stat->stat == SAS_SAM_STAT_CHECK_CONDITION && |
| 120 | dev->sata_dev.class == ATA_DEV_ATAPI)) { |
| 121 | memcpy(dev->sata_dev.fis, resp->ending_fis, ATA_RESP_FIS_SIZE); |
| 122 | |
| 123 | if (!link->sactive) { |
| 124 | qc->err_mask |= ac_err_mask(status: dev->sata_dev.fis[2]); |
| 125 | } else { |
| 126 | link->eh_info.err_mask |= ac_err_mask(status: dev->sata_dev.fis[2]); |
| 127 | if (unlikely(link->eh_info.err_mask)) |
| 128 | qc->flags |= ATA_QCFLAG_EH; |
| 129 | } |
| 130 | } else { |
| 131 | ac = sas_to_ata_err(ts: stat); |
| 132 | if (ac) { |
| 133 | pr_warn("%s: SAS error 0x%x\n" , __func__, stat->stat); |
| 134 | /* We saw a SAS error. Send a vague error. */ |
| 135 | if (!link->sactive) { |
| 136 | qc->err_mask = ac; |
| 137 | } else { |
| 138 | link->eh_info.err_mask |= AC_ERR_DEV; |
| 139 | qc->flags |= ATA_QCFLAG_EH; |
| 140 | } |
| 141 | |
| 142 | dev->sata_dev.fis[2] = ATA_ERR | ATA_DRDY; /* tf status */ |
| 143 | dev->sata_dev.fis[3] = ATA_ABORTED; /* tf error */ |
| 144 | } |
| 145 | } |
| 146 | |
| 147 | qc->lldd_task = NULL; |
| 148 | ata_qc_complete(qc); |
| 149 | spin_unlock_irqrestore(lock: ap->lock, flags); |
| 150 | |
| 151 | qc_already_gone: |
| 152 | sas_free_task(task); |
| 153 | } |
| 154 | |
| 155 | static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc) |
| 156 | __must_hold(ap->lock) |
| 157 | { |
| 158 | struct sas_task *task; |
| 159 | struct scatterlist *sg; |
| 160 | int ret = AC_ERR_SYSTEM; |
| 161 | unsigned int si, xfer = 0; |
| 162 | struct ata_port *ap = qc->ap; |
| 163 | struct domain_device *dev = ap->private_data; |
| 164 | struct sas_ha_struct *sas_ha = dev->port->ha; |
| 165 | struct Scsi_Host *host = sas_ha->shost; |
| 166 | struct sas_internal *i = to_sas_internal(host->transportt); |
| 167 | |
| 168 | /* TODO: we should try to remove that unlock */ |
| 169 | spin_unlock(lock: ap->lock); |
| 170 | |
| 171 | /* If the device fell off, no sense in issuing commands */ |
| 172 | if (test_bit(SAS_DEV_GONE, &dev->state)) |
| 173 | goto out; |
| 174 | |
| 175 | task = sas_alloc_task(GFP_ATOMIC); |
| 176 | if (!task) |
| 177 | goto out; |
| 178 | task->dev = dev; |
| 179 | task->task_proto = SAS_PROTOCOL_STP; |
| 180 | task->task_done = sas_ata_task_done; |
| 181 | |
| 182 | /* For NCQ commands, zero out the tag libata assigned us */ |
| 183 | if (ata_is_ncq(prot: qc->tf.protocol)) |
| 184 | qc->tf.nsect = 0; |
| 185 | |
| 186 | ata_tf_to_fis(tf: &qc->tf, pmp: qc->dev->link->pmp, is_cmd: 1, fis: (u8 *)&task->ata_task.fis); |
| 187 | task->uldd_task = qc; |
| 188 | if (ata_is_atapi(prot: qc->tf.protocol)) { |
| 189 | memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len); |
| 190 | task->total_xfer_len = qc->nbytes; |
| 191 | task->num_scatter = qc->n_elem; |
| 192 | task->data_dir = qc->dma_dir; |
| 193 | } else if (!ata_is_data(prot: qc->tf.protocol)) { |
| 194 | task->data_dir = DMA_NONE; |
| 195 | } else { |
| 196 | for_each_sg(qc->sg, sg, qc->n_elem, si) |
| 197 | xfer += sg_dma_len(sg); |
| 198 | |
| 199 | task->total_xfer_len = xfer; |
| 200 | task->num_scatter = si; |
| 201 | task->data_dir = qc->dma_dir; |
| 202 | } |
| 203 | task->scatter = qc->sg; |
| 204 | qc->lldd_task = task; |
| 205 | |
| 206 | task->ata_task.use_ncq = ata_is_ncq(prot: qc->tf.protocol); |
| 207 | task->ata_task.dma_xfer = ata_is_dma(prot: qc->tf.protocol); |
| 208 | |
| 209 | if (qc->flags & ATA_QCFLAG_RESULT_TF) |
| 210 | task->ata_task.return_fis_on_success = 1; |
| 211 | |
| 212 | if (qc->scsicmd) |
| 213 | ASSIGN_SAS_TASK(qc->scsicmd, task); |
| 214 | |
| 215 | ret = i->dft->lldd_execute_task(task, GFP_ATOMIC); |
| 216 | if (ret) { |
| 217 | pr_debug("lldd_execute_task returned: %d\n" , ret); |
| 218 | |
| 219 | if (qc->scsicmd) |
| 220 | ASSIGN_SAS_TASK(qc->scsicmd, NULL); |
| 221 | sas_free_task(task); |
| 222 | qc->lldd_task = NULL; |
| 223 | ret = AC_ERR_SYSTEM; |
| 224 | } |
| 225 | |
| 226 | out: |
| 227 | spin_lock(lock: ap->lock); |
| 228 | return ret; |
| 229 | } |
| 230 | |
| 231 | static void sas_ata_qc_fill_rtf(struct ata_queued_cmd *qc) |
| 232 | { |
| 233 | struct domain_device *dev = qc->ap->private_data; |
| 234 | |
| 235 | ata_tf_from_fis(fis: dev->sata_dev.fis, tf: &qc->result_tf); |
| 236 | } |
| 237 | |
| 238 | static struct sas_internal *dev_to_sas_internal(struct domain_device *dev) |
| 239 | { |
| 240 | return to_sas_internal(dev->port->ha->shost->transportt); |
| 241 | } |
| 242 | |
| 243 | static int sas_get_ata_command_set(struct domain_device *dev) |
| 244 | { |
| 245 | struct ata_taskfile tf; |
| 246 | |
| 247 | if (dev->dev_type == SAS_SATA_PENDING) |
| 248 | return ATA_DEV_UNKNOWN; |
| 249 | |
| 250 | ata_tf_from_fis(fis: dev->frame_rcvd, tf: &tf); |
| 251 | |
| 252 | return ata_dev_classify(tf: &tf); |
| 253 | } |
| 254 | |
| 255 | static int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy) |
| 256 | { |
| 257 | if (phy->attached_tproto & SAS_PROTOCOL_STP) |
| 258 | dev->tproto = phy->attached_tproto; |
| 259 | if (phy->attached_sata_dev) |
| 260 | dev->tproto |= SAS_SATA_DEV; |
| 261 | |
| 262 | if (phy->attached_dev_type == SAS_SATA_PENDING) |
| 263 | dev->dev_type = SAS_SATA_PENDING; |
| 264 | else { |
| 265 | int res; |
| 266 | |
| 267 | dev->dev_type = SAS_SATA_DEV; |
| 268 | res = sas_get_report_phy_sata(dev: dev->parent, phy_id: phy->phy_id, |
| 269 | rps_resp: &dev->sata_dev.rps_resp); |
| 270 | if (res) { |
| 271 | pr_debug("report phy sata to %016llx:%02d returned 0x%x\n" , |
| 272 | SAS_ADDR(dev->parent->sas_addr), |
| 273 | phy->phy_id, res); |
| 274 | return res; |
| 275 | } |
| 276 | memcpy(dev->frame_rcvd, &dev->sata_dev.rps_resp.rps.fis, |
| 277 | sizeof(struct dev_to_host_fis)); |
| 278 | dev->sata_dev.class = sas_get_ata_command_set(dev); |
| 279 | } |
| 280 | return 0; |
| 281 | } |
| 282 | |
| 283 | static int sas_ata_clear_pending(struct domain_device *dev, struct ex_phy *phy) |
| 284 | { |
| 285 | int res; |
| 286 | |
| 287 | /* we weren't pending, so successfully end the reset sequence now */ |
| 288 | if (dev->dev_type != SAS_SATA_PENDING) |
| 289 | return 1; |
| 290 | |
| 291 | /* hmmm, if this succeeds do we need to repost the domain_device to the |
| 292 | * lldd so it can pick up new parameters? |
| 293 | */ |
| 294 | res = sas_get_ata_info(dev, phy); |
| 295 | if (res) |
| 296 | return 0; /* retry */ |
| 297 | else |
| 298 | return 1; |
| 299 | } |
| 300 | |
| 301 | int smp_ata_check_ready_type(struct ata_link *link) |
| 302 | { |
| 303 | struct domain_device *dev = link->ap->private_data; |
| 304 | struct sas_phy *phy = sas_get_local_phy(dev); |
| 305 | struct domain_device *ex_dev = dev->parent; |
| 306 | enum sas_device_type type = SAS_PHY_UNUSED; |
| 307 | u8 sas_addr[SAS_ADDR_SIZE]; |
| 308 | int res; |
| 309 | |
| 310 | res = sas_get_phy_attached_dev(dev: ex_dev, phy_id: phy->number, sas_addr, type: &type); |
| 311 | sas_put_local_phy(phy); |
| 312 | if (res) |
| 313 | return res; |
| 314 | |
| 315 | switch (type) { |
| 316 | case SAS_SATA_PENDING: |
| 317 | return 0; |
| 318 | case SAS_END_DEVICE: |
| 319 | return 1; |
| 320 | default: |
| 321 | return -ENODEV; |
| 322 | } |
| 323 | } |
| 324 | EXPORT_SYMBOL_GPL(smp_ata_check_ready_type); |
| 325 | |
| 326 | static int smp_ata_check_ready(struct ata_link *link) |
| 327 | { |
| 328 | int res; |
| 329 | struct ata_port *ap = link->ap; |
| 330 | struct domain_device *dev = ap->private_data; |
| 331 | struct domain_device *ex_dev = dev->parent; |
| 332 | struct sas_phy *phy = sas_get_local_phy(dev); |
| 333 | struct ex_phy *ex_phy = &ex_dev->ex_dev.ex_phy[phy->number]; |
| 334 | |
| 335 | res = sas_ex_phy_discover(dev: ex_dev, single: phy->number); |
| 336 | sas_put_local_phy(phy); |
| 337 | |
| 338 | /* break the wait early if the expander is unreachable, |
| 339 | * otherwise keep polling |
| 340 | */ |
| 341 | if (res == -ECOMM) |
| 342 | return res; |
| 343 | if (res != SMP_RESP_FUNC_ACC) |
| 344 | return 0; |
| 345 | |
| 346 | switch (ex_phy->attached_dev_type) { |
| 347 | case SAS_SATA_PENDING: |
| 348 | return 0; |
| 349 | case SAS_END_DEVICE: |
| 350 | if (ex_phy->attached_sata_dev) |
| 351 | return sas_ata_clear_pending(dev, phy: ex_phy); |
| 352 | fallthrough; |
| 353 | default: |
| 354 | return -ENODEV; |
| 355 | } |
| 356 | } |
| 357 | |
| 358 | static int local_ata_check_ready(struct ata_link *link) |
| 359 | { |
| 360 | struct ata_port *ap = link->ap; |
| 361 | struct domain_device *dev = ap->private_data; |
| 362 | struct sas_internal *i = dev_to_sas_internal(dev); |
| 363 | |
| 364 | if (i->dft->lldd_ata_check_ready) |
| 365 | return i->dft->lldd_ata_check_ready(dev); |
| 366 | else { |
| 367 | /* lldd's that don't implement 'ready' checking get the |
| 368 | * old default behavior of not coordinating reset |
| 369 | * recovery with libata |
| 370 | */ |
| 371 | return 1; |
| 372 | } |
| 373 | } |
| 374 | |
| 375 | static int sas_ata_printk(const char *level, const struct domain_device *ddev, |
| 376 | const char *fmt, ...) |
| 377 | { |
| 378 | struct ata_port *ap = ddev->sata_dev.ap; |
| 379 | struct device *dev = &ddev->rphy->dev; |
| 380 | struct va_format vaf; |
| 381 | va_list args; |
| 382 | int r; |
| 383 | |
| 384 | va_start(args, fmt); |
| 385 | |
| 386 | vaf.fmt = fmt; |
| 387 | vaf.va = &args; |
| 388 | |
| 389 | r = printk("%s" SAS_FMT "ata%u: %s: %pV" , |
| 390 | level, ap->print_id, dev_name(dev), &vaf); |
| 391 | |
| 392 | va_end(args); |
| 393 | |
| 394 | return r; |
| 395 | } |
| 396 | |
| 397 | static int sas_ata_wait_after_reset(struct domain_device *dev, unsigned long deadline) |
| 398 | { |
| 399 | struct sata_device *sata_dev = &dev->sata_dev; |
| 400 | int (*check_ready)(struct ata_link *link); |
| 401 | struct ata_port *ap = sata_dev->ap; |
| 402 | struct ata_link *link = &ap->link; |
| 403 | struct sas_phy *phy; |
| 404 | int ret; |
| 405 | |
| 406 | phy = sas_get_local_phy(dev); |
| 407 | if (scsi_is_sas_phy_local(phy)) |
| 408 | check_ready = local_ata_check_ready; |
| 409 | else |
| 410 | check_ready = smp_ata_check_ready; |
| 411 | sas_put_local_phy(phy); |
| 412 | |
| 413 | ret = ata_wait_after_reset(link, deadline, check_ready); |
| 414 | if (ret && ret != -EAGAIN) |
| 415 | sas_ata_printk(KERN_ERR, ddev: dev, fmt: "reset failed (errno=%d)\n" , ret); |
| 416 | |
| 417 | return ret; |
| 418 | } |
| 419 | |
| 420 | static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class, |
| 421 | unsigned long deadline) |
| 422 | { |
| 423 | struct ata_port *ap = link->ap; |
| 424 | struct domain_device *dev = ap->private_data; |
| 425 | struct sas_internal *i = dev_to_sas_internal(dev); |
| 426 | int ret; |
| 427 | |
| 428 | ret = i->dft->lldd_I_T_nexus_reset(dev); |
| 429 | if (ret == -ENODEV) |
| 430 | return ret; |
| 431 | |
| 432 | if (ret != TMF_RESP_FUNC_COMPLETE) |
| 433 | sas_ata_printk(KERN_DEBUG, ddev: dev, fmt: "Unable to reset ata device?\n" ); |
| 434 | |
| 435 | ret = sas_ata_wait_after_reset(dev, deadline); |
| 436 | |
| 437 | *class = dev->sata_dev.class; |
| 438 | |
| 439 | ap->cbl = ATA_CBL_SATA; |
| 440 | return ret; |
| 441 | } |
| 442 | |
| 443 | /* |
| 444 | * notify the lldd to forget the sas_task for this internal ata command |
| 445 | * that bypasses scsi-eh |
| 446 | */ |
| 447 | static void sas_ata_internal_abort(struct sas_task *task) |
| 448 | { |
| 449 | struct sas_internal *si = dev_to_sas_internal(dev: task->dev); |
| 450 | unsigned long flags; |
| 451 | int res; |
| 452 | |
| 453 | spin_lock_irqsave(&task->task_state_lock, flags); |
| 454 | if (task->task_state_flags & SAS_TASK_STATE_ABORTED || |
| 455 | task->task_state_flags & SAS_TASK_STATE_DONE) { |
| 456 | spin_unlock_irqrestore(lock: &task->task_state_lock, flags); |
| 457 | pr_debug("%s: Task %p already finished.\n" , __func__, task); |
| 458 | goto out; |
| 459 | } |
| 460 | task->task_state_flags |= SAS_TASK_STATE_ABORTED; |
| 461 | spin_unlock_irqrestore(lock: &task->task_state_lock, flags); |
| 462 | |
| 463 | res = si->dft->lldd_abort_task(task); |
| 464 | |
| 465 | spin_lock_irqsave(&task->task_state_lock, flags); |
| 466 | if (task->task_state_flags & SAS_TASK_STATE_DONE || |
| 467 | res == TMF_RESP_FUNC_COMPLETE) { |
| 468 | spin_unlock_irqrestore(lock: &task->task_state_lock, flags); |
| 469 | goto out; |
| 470 | } |
| 471 | |
| 472 | /* XXX we are not prepared to deal with ->lldd_abort_task() |
| 473 | * failures. TODO: lldds need to unconditionally forget about |
| 474 | * aborted ata tasks, otherwise we (likely) leak the sas task |
| 475 | * here |
| 476 | */ |
| 477 | pr_warn("%s: Task %p leaked.\n" , __func__, task); |
| 478 | |
| 479 | if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) |
| 480 | task->task_state_flags &= ~SAS_TASK_STATE_ABORTED; |
| 481 | spin_unlock_irqrestore(lock: &task->task_state_lock, flags); |
| 482 | |
| 483 | return; |
| 484 | out: |
| 485 | sas_free_task(task); |
| 486 | } |
| 487 | |
| 488 | static void sas_ata_post_internal(struct ata_queued_cmd *qc) |
| 489 | { |
| 490 | if (qc->flags & ATA_QCFLAG_EH) |
| 491 | qc->err_mask |= AC_ERR_OTHER; |
| 492 | |
| 493 | if (qc->err_mask) { |
| 494 | /* |
| 495 | * Find the sas_task and kill it. By this point, libata |
| 496 | * has decided to kill the qc and has frozen the port. |
| 497 | * In this state sas_ata_task_done() will no longer free |
| 498 | * the sas_task, so we need to notify the lldd (via |
| 499 | * ->lldd_abort_task) that the task is dead and free it |
| 500 | * ourselves. |
| 501 | */ |
| 502 | struct sas_task *task = qc->lldd_task; |
| 503 | |
| 504 | qc->lldd_task = NULL; |
| 505 | if (!task) |
| 506 | return; |
| 507 | task->uldd_task = NULL; |
| 508 | sas_ata_internal_abort(task); |
| 509 | } |
| 510 | } |
| 511 | |
| 512 | |
| 513 | static void sas_ata_set_dmamode(struct ata_port *ap, struct ata_device *ata_dev) |
| 514 | { |
| 515 | struct domain_device *dev = ap->private_data; |
| 516 | struct sas_internal *i = dev_to_sas_internal(dev); |
| 517 | |
| 518 | if (i->dft->lldd_ata_set_dmamode) |
| 519 | i->dft->lldd_ata_set_dmamode(dev); |
| 520 | } |
| 521 | |
| 522 | static void sas_ata_sched_eh(struct ata_port *ap) |
| 523 | { |
| 524 | struct domain_device *dev = ap->private_data; |
| 525 | struct sas_ha_struct *ha = dev->port->ha; |
| 526 | unsigned long flags; |
| 527 | |
| 528 | spin_lock_irqsave(&ha->lock, flags); |
| 529 | if (!test_and_set_bit(nr: SAS_DEV_EH_PENDING, addr: &dev->state)) |
| 530 | ha->eh_active++; |
| 531 | ata_std_sched_eh(ap); |
| 532 | spin_unlock_irqrestore(lock: &ha->lock, flags); |
| 533 | } |
| 534 | |
| 535 | void sas_ata_end_eh(struct ata_port *ap) |
| 536 | { |
| 537 | struct domain_device *dev = ap->private_data; |
| 538 | struct sas_ha_struct *ha = dev->port->ha; |
| 539 | unsigned long flags; |
| 540 | |
| 541 | spin_lock_irqsave(&ha->lock, flags); |
| 542 | if (test_and_clear_bit(nr: SAS_DEV_EH_PENDING, addr: &dev->state)) |
| 543 | ha->eh_active--; |
| 544 | spin_unlock_irqrestore(lock: &ha->lock, flags); |
| 545 | } |
| 546 | |
| 547 | static int sas_ata_prereset(struct ata_link *link, unsigned long deadline) |
| 548 | { |
| 549 | struct ata_port *ap = link->ap; |
| 550 | struct domain_device *dev = ap->private_data; |
| 551 | struct sas_phy *local_phy = sas_get_local_phy(dev); |
| 552 | int res = 0; |
| 553 | |
| 554 | if (!local_phy->enabled || test_bit(SAS_DEV_GONE, &dev->state)) |
| 555 | res = -ENOENT; |
| 556 | sas_put_local_phy(phy: local_phy); |
| 557 | |
| 558 | return res; |
| 559 | } |
| 560 | |
| 561 | static struct ata_port_operations sas_sata_ops = { |
| 562 | .reset.prereset = sas_ata_prereset, |
| 563 | .reset.hardreset = sas_ata_hard_reset, |
| 564 | .error_handler = ata_std_error_handler, |
| 565 | .post_internal_cmd = sas_ata_post_internal, |
| 566 | .qc_defer = ata_std_qc_defer, |
| 567 | .qc_issue = sas_ata_qc_issue, |
| 568 | .qc_fill_rtf = sas_ata_qc_fill_rtf, |
| 569 | .set_dmamode = sas_ata_set_dmamode, |
| 570 | .sched_eh = sas_ata_sched_eh, |
| 571 | .end_eh = sas_ata_end_eh, |
| 572 | }; |
| 573 | |
| 574 | int sas_ata_init(struct domain_device *found_dev) |
| 575 | { |
| 576 | struct sas_ha_struct *ha = found_dev->port->ha; |
| 577 | struct Scsi_Host *shost = ha->shost; |
| 578 | struct ata_host *ata_host; |
| 579 | struct ata_port *ap; |
| 580 | int rc; |
| 581 | |
| 582 | ata_host = kzalloc(sizeof(*ata_host), GFP_KERNEL); |
| 583 | if (!ata_host) { |
| 584 | pr_err("ata host alloc failed.\n" ); |
| 585 | return -ENOMEM; |
| 586 | } |
| 587 | |
| 588 | ata_host_init(ata_host, ha->dev, &sas_sata_ops); |
| 589 | |
| 590 | ap = ata_port_alloc(host: ata_host); |
| 591 | if (!ap) { |
| 592 | pr_err("ata_port_alloc failed.\n" ); |
| 593 | rc = -ENODEV; |
| 594 | goto free_host; |
| 595 | } |
| 596 | |
| 597 | ap->port_no = 0; |
| 598 | ap->pio_mask = ATA_PIO4; |
| 599 | ap->mwdma_mask = ATA_MWDMA2; |
| 600 | ap->udma_mask = ATA_UDMA6; |
| 601 | ap->flags |= ATA_FLAG_SATA | ATA_FLAG_PIO_DMA | ATA_FLAG_NCQ | |
| 602 | ATA_FLAG_SAS_HOST | ATA_FLAG_FPDMA_AUX; |
| 603 | ap->ops = &sas_sata_ops; |
| 604 | ap->private_data = found_dev; |
| 605 | ap->cbl = ATA_CBL_SATA; |
| 606 | ap->scsi_host = shost; |
| 607 | |
| 608 | rc = ata_tport_add(parent: ata_host->dev, ap); |
| 609 | if (rc) |
| 610 | goto free_port; |
| 611 | |
| 612 | found_dev->sata_dev.ata_host = ata_host; |
| 613 | found_dev->sata_dev.ap = ap; |
| 614 | |
| 615 | return 0; |
| 616 | |
| 617 | free_port: |
| 618 | ata_port_free(ap); |
| 619 | free_host: |
| 620 | ata_host_put(host: ata_host); |
| 621 | return rc; |
| 622 | } |
| 623 | |
| 624 | void sas_ata_task_abort(struct sas_task *task) |
| 625 | { |
| 626 | struct ata_queued_cmd *qc = task->uldd_task; |
| 627 | struct completion *waiting; |
| 628 | |
| 629 | /* Bounce SCSI-initiated commands to the SCSI EH */ |
| 630 | if (qc->scsicmd) { |
| 631 | blk_abort_request(scsi_cmd_to_rq(scmd: qc->scsicmd)); |
| 632 | return; |
| 633 | } |
| 634 | |
| 635 | /* Internal command, fake a timeout and complete. */ |
| 636 | qc->flags &= ~ATA_QCFLAG_ACTIVE; |
| 637 | qc->flags |= ATA_QCFLAG_EH; |
| 638 | qc->err_mask |= AC_ERR_TIMEOUT; |
| 639 | waiting = qc->private_data; |
| 640 | complete(waiting); |
| 641 | } |
| 642 | |
| 643 | void sas_probe_sata(struct asd_sas_port *port) |
| 644 | { |
| 645 | struct domain_device *dev, *n; |
| 646 | |
| 647 | mutex_lock(&port->ha->disco_mutex); |
| 648 | list_for_each_entry(dev, &port->disco_list, disco_list_node) { |
| 649 | if (!dev_is_sata(dev)) |
| 650 | continue; |
| 651 | |
| 652 | ata_port_probe(ap: dev->sata_dev.ap); |
| 653 | } |
| 654 | mutex_unlock(lock: &port->ha->disco_mutex); |
| 655 | |
| 656 | list_for_each_entry_safe(dev, n, &port->disco_list, disco_list_node) { |
| 657 | if (!dev_is_sata(dev)) |
| 658 | continue; |
| 659 | |
| 660 | sas_ata_wait_eh(dev); |
| 661 | |
| 662 | /* if libata could not bring the link up, don't surface |
| 663 | * the device |
| 664 | */ |
| 665 | if (!ata_dev_enabled(dev: sas_to_ata_dev(dev))) |
| 666 | sas_fail_probe(dev, func: __func__, err: -ENODEV); |
| 667 | } |
| 668 | |
| 669 | } |
| 670 | |
| 671 | int sas_ata_add_dev(struct domain_device *parent, struct ex_phy *phy, |
| 672 | struct domain_device *child, int phy_id) |
| 673 | { |
| 674 | struct sas_rphy *rphy; |
| 675 | int ret; |
| 676 | |
| 677 | if (child->linkrate > parent->min_linkrate) { |
| 678 | struct sas_phy *cphy = child->phy; |
| 679 | enum sas_linkrate min_prate = cphy->minimum_linkrate, |
| 680 | parent_min_lrate = parent->min_linkrate, |
| 681 | min_linkrate = (min_prate > parent_min_lrate) ? |
| 682 | parent_min_lrate : 0; |
| 683 | struct sas_phy_linkrates rates = { |
| 684 | .maximum_linkrate = parent->min_linkrate, |
| 685 | .minimum_linkrate = min_linkrate, |
| 686 | }; |
| 687 | |
| 688 | pr_notice("ex %016llx phy%02d SATA device linkrate > min pathway connection rate, attempting to lower device linkrate\n" , |
| 689 | SAS_ADDR(child->sas_addr), phy_id); |
| 690 | ret = sas_smp_phy_control(dev: parent, phy_id, |
| 691 | phy_func: PHY_FUNC_LINK_RESET, &rates); |
| 692 | if (ret) { |
| 693 | pr_err("ex %016llx phy%02d SATA device could not set linkrate (%d)\n" , |
| 694 | SAS_ADDR(child->sas_addr), phy_id, ret); |
| 695 | return ret; |
| 696 | } |
| 697 | pr_notice("ex %016llx phy%02d SATA device set linkrate successfully\n" , |
| 698 | SAS_ADDR(child->sas_addr), phy_id); |
| 699 | child->linkrate = child->min_linkrate; |
| 700 | } |
| 701 | ret = sas_get_ata_info(dev: child, phy); |
| 702 | if (ret) |
| 703 | return ret; |
| 704 | |
| 705 | sas_init_dev(dev: child); |
| 706 | ret = sas_ata_init(found_dev: child); |
| 707 | if (ret) |
| 708 | return ret; |
| 709 | |
| 710 | rphy = sas_end_device_alloc(phy->port); |
| 711 | if (!rphy) |
| 712 | return -ENOMEM; |
| 713 | |
| 714 | rphy->identify.phy_identifier = phy_id; |
| 715 | child->rphy = rphy; |
| 716 | get_device(dev: &rphy->dev); |
| 717 | |
| 718 | list_add_tail(new: &child->disco_list_node, head: &parent->port->disco_list); |
| 719 | |
| 720 | ret = sas_discover_sata(dev: child); |
| 721 | if (ret) { |
| 722 | pr_notice("sas_discover_sata() for device %16llx at %016llx:%02d returned 0x%x\n" , |
| 723 | SAS_ADDR(child->sas_addr), |
| 724 | SAS_ADDR(parent->sas_addr), phy_id, ret); |
| 725 | sas_rphy_free(child->rphy); |
| 726 | list_del(entry: &child->disco_list_node); |
| 727 | return ret; |
| 728 | } |
| 729 | |
| 730 | return 0; |
| 731 | } |
| 732 | |
| 733 | static void sas_ata_flush_pm_eh(struct asd_sas_port *port, const char *func) |
| 734 | { |
| 735 | struct domain_device *dev, *n; |
| 736 | |
| 737 | list_for_each_entry_safe(dev, n, &port->dev_list, dev_list_node) { |
| 738 | if (!dev_is_sata(dev)) |
| 739 | continue; |
| 740 | |
| 741 | sas_ata_wait_eh(dev); |
| 742 | |
| 743 | /* if libata failed to power manage the device, tear it down */ |
| 744 | if (ata_dev_disabled(dev: sas_to_ata_dev(dev))) |
| 745 | sas_fail_probe(dev, func, err: -ENODEV); |
| 746 | } |
| 747 | } |
| 748 | |
| 749 | void sas_suspend_sata(struct asd_sas_port *port) |
| 750 | { |
| 751 | struct domain_device *dev; |
| 752 | |
| 753 | mutex_lock(&port->ha->disco_mutex); |
| 754 | list_for_each_entry(dev, &port->dev_list, dev_list_node) { |
| 755 | struct sata_device *sata; |
| 756 | |
| 757 | if (!dev_is_sata(dev)) |
| 758 | continue; |
| 759 | |
| 760 | sata = &dev->sata_dev; |
| 761 | if (sata->ap->pm_mesg.event == PM_EVENT_SUSPEND) |
| 762 | continue; |
| 763 | |
| 764 | ata_sas_port_suspend(ap: sata->ap); |
| 765 | } |
| 766 | mutex_unlock(lock: &port->ha->disco_mutex); |
| 767 | |
| 768 | sas_ata_flush_pm_eh(port, func: __func__); |
| 769 | } |
| 770 | |
| 771 | void sas_resume_sata(struct asd_sas_port *port) |
| 772 | { |
| 773 | struct domain_device *dev; |
| 774 | |
| 775 | mutex_lock(&port->ha->disco_mutex); |
| 776 | list_for_each_entry(dev, &port->dev_list, dev_list_node) { |
| 777 | struct sata_device *sata; |
| 778 | |
| 779 | if (!dev_is_sata(dev)) |
| 780 | continue; |
| 781 | |
| 782 | sata = &dev->sata_dev; |
| 783 | if (sata->ap->pm_mesg.event == PM_EVENT_ON) |
| 784 | continue; |
| 785 | |
| 786 | ata_sas_port_resume(ap: sata->ap); |
| 787 | } |
| 788 | mutex_unlock(lock: &port->ha->disco_mutex); |
| 789 | |
| 790 | sas_ata_flush_pm_eh(port, func: __func__); |
| 791 | } |
| 792 | |
| 793 | /** |
| 794 | * sas_discover_sata - discover an STP/SATA domain device |
| 795 | * @dev: pointer to struct domain_device of interest |
| 796 | * |
| 797 | * Devices directly attached to a HA port, have no parents. All other |
| 798 | * devices do, and should have their "parent" pointer set appropriately |
| 799 | * before calling this function. |
| 800 | */ |
| 801 | int sas_discover_sata(struct domain_device *dev) |
| 802 | { |
| 803 | if (dev->dev_type == SAS_SATA_PM) |
| 804 | return -ENODEV; |
| 805 | |
| 806 | dev->sata_dev.class = sas_get_ata_command_set(dev); |
| 807 | sas_fill_in_rphy(dev, rphy: dev->rphy); |
| 808 | |
| 809 | return sas_notify_lldd_dev_found(dev); |
| 810 | } |
| 811 | |
| 812 | static void async_sas_ata_eh(void *data, async_cookie_t cookie) |
| 813 | { |
| 814 | struct domain_device *dev = data; |
| 815 | struct ata_port *ap = dev->sata_dev.ap; |
| 816 | struct sas_ha_struct *ha = dev->port->ha; |
| 817 | |
| 818 | sas_ata_printk(KERN_DEBUG, ddev: dev, fmt: "dev error handler\n" ); |
| 819 | ata_scsi_port_error_handler(host: ha->shost, ap); |
| 820 | sas_put_device(dev); |
| 821 | } |
| 822 | |
| 823 | void sas_ata_strategy_handler(struct Scsi_Host *shost) |
| 824 | { |
| 825 | struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); |
| 826 | ASYNC_DOMAIN_EXCLUSIVE(async); |
| 827 | int i; |
| 828 | |
| 829 | /* it's ok to defer revalidation events during ata eh, these |
| 830 | * disks are in one of three states: |
| 831 | * 1/ present for initial domain discovery, and these |
| 832 | * resets will cause bcn flutters |
| 833 | * 2/ hot removed, we'll discover that after eh fails |
| 834 | * 3/ hot added after initial discovery, lost the race, and need |
| 835 | * to catch the next train. |
| 836 | */ |
| 837 | sas_disable_revalidation(ha: sas_ha); |
| 838 | |
| 839 | spin_lock_irq(lock: &sas_ha->phy_port_lock); |
| 840 | for (i = 0; i < sas_ha->num_phys; i++) { |
| 841 | struct asd_sas_port *port = sas_ha->sas_port[i]; |
| 842 | struct domain_device *dev; |
| 843 | |
| 844 | spin_lock(lock: &port->dev_list_lock); |
| 845 | list_for_each_entry(dev, &port->dev_list, dev_list_node) { |
| 846 | if (!dev_is_sata(dev)) |
| 847 | continue; |
| 848 | |
| 849 | /* hold a reference over eh since we may be |
| 850 | * racing with final remove once all commands |
| 851 | * are completed |
| 852 | */ |
| 853 | kref_get(kref: &dev->kref); |
| 854 | |
| 855 | async_schedule_domain(func: async_sas_ata_eh, data: dev, domain: &async); |
| 856 | } |
| 857 | spin_unlock(lock: &port->dev_list_lock); |
| 858 | } |
| 859 | spin_unlock_irq(lock: &sas_ha->phy_port_lock); |
| 860 | |
| 861 | async_synchronize_full_domain(domain: &async); |
| 862 | |
| 863 | sas_enable_revalidation(ha: sas_ha); |
| 864 | } |
| 865 | |
| 866 | void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q) |
| 867 | { |
| 868 | struct scsi_cmnd *cmd, *n; |
| 869 | struct domain_device *eh_dev; |
| 870 | |
| 871 | do { |
| 872 | LIST_HEAD(sata_q); |
| 873 | eh_dev = NULL; |
| 874 | |
| 875 | list_for_each_entry_safe(cmd, n, work_q, eh_entry) { |
| 876 | struct domain_device *ddev = cmd_to_domain_dev(cmd); |
| 877 | |
| 878 | if (!dev_is_sata(dev: ddev) || TO_SAS_TASK(cmd)) |
| 879 | continue; |
| 880 | if (eh_dev && eh_dev != ddev) |
| 881 | continue; |
| 882 | eh_dev = ddev; |
| 883 | list_move(list: &cmd->eh_entry, head: &sata_q); |
| 884 | } |
| 885 | |
| 886 | if (!list_empty(head: &sata_q)) { |
| 887 | struct ata_port *ap = eh_dev->sata_dev.ap; |
| 888 | |
| 889 | sas_ata_printk(KERN_DEBUG, ddev: eh_dev, fmt: "cmd error handler\n" ); |
| 890 | ata_scsi_cmd_error_handler(host: shost, ap, eh_q: &sata_q); |
| 891 | /* |
| 892 | * ata's error handler may leave the cmd on the list |
| 893 | * so make sure they don't remain on a stack list |
| 894 | * about to go out of scope. |
| 895 | * |
| 896 | * This looks strange, since the commands are |
| 897 | * now part of no list, but the next error |
| 898 | * action will be ata_port_error_handler() |
| 899 | * which takes no list and sweeps them up |
| 900 | * anyway from the ata tag array. |
| 901 | */ |
| 902 | while (!list_empty(head: &sata_q)) |
| 903 | list_del_init(entry: sata_q.next); |
| 904 | } |
| 905 | } while (eh_dev); |
| 906 | } |
| 907 | |
| 908 | void sas_ata_schedule_reset(struct domain_device *dev) |
| 909 | { |
| 910 | struct ata_eh_info *ehi; |
| 911 | struct ata_port *ap; |
| 912 | unsigned long flags; |
| 913 | |
| 914 | if (!dev_is_sata(dev)) |
| 915 | return; |
| 916 | |
| 917 | ap = dev->sata_dev.ap; |
| 918 | ehi = &ap->link.eh_info; |
| 919 | |
| 920 | spin_lock_irqsave(ap->lock, flags); |
| 921 | ehi->err_mask |= AC_ERR_TIMEOUT; |
| 922 | ehi->action |= ATA_EH_RESET; |
| 923 | ata_port_schedule_eh(ap); |
| 924 | spin_unlock_irqrestore(lock: ap->lock, flags); |
| 925 | } |
| 926 | EXPORT_SYMBOL_GPL(sas_ata_schedule_reset); |
| 927 | |
| 928 | void sas_ata_wait_eh(struct domain_device *dev) |
| 929 | { |
| 930 | ata_port_wait_eh(ap: dev->sata_dev.ap); |
| 931 | } |
| 932 | |
| 933 | void sas_ata_device_link_abort(struct domain_device *device, bool force_reset) |
| 934 | { |
| 935 | struct ata_port *ap = device->sata_dev.ap; |
| 936 | struct ata_link *link = &ap->link; |
| 937 | unsigned long flags; |
| 938 | |
| 939 | spin_lock_irqsave(ap->lock, flags); |
| 940 | device->sata_dev.fis[2] = ATA_ERR | ATA_DRDY; /* tf status */ |
| 941 | device->sata_dev.fis[3] = ATA_ABORTED; /* tf error */ |
| 942 | |
| 943 | link->eh_info.err_mask |= AC_ERR_DEV; |
| 944 | if (force_reset) |
| 945 | link->eh_info.action |= ATA_EH_RESET; |
| 946 | ata_link_abort(link); |
| 947 | spin_unlock_irqrestore(lock: ap->lock, flags); |
| 948 | } |
| 949 | EXPORT_SYMBOL_GPL(sas_ata_device_link_abort); |
| 950 | |
| 951 | int sas_execute_ata_cmd(struct domain_device *device, u8 *fis, int force_phy_id) |
| 952 | { |
| 953 | struct sas_tmf_task tmf_task = {}; |
| 954 | return sas_execute_tmf(device, parameter: fis, para_len: sizeof(struct host_to_dev_fis), |
| 955 | force_phy_id, tmf: &tmf_task); |
| 956 | } |
| 957 | EXPORT_SYMBOL_GPL(sas_execute_ata_cmd); |
| 958 | |
| 959 | static ssize_t sas_ncq_prio_supported_show(struct device *device, |
| 960 | struct device_attribute *attr, |
| 961 | char *buf) |
| 962 | { |
| 963 | struct scsi_device *sdev = to_scsi_device(device); |
| 964 | struct domain_device *ddev = sdev_to_domain_dev(sdev); |
| 965 | bool supported; |
| 966 | int rc; |
| 967 | |
| 968 | rc = ata_ncq_prio_supported(ap: ddev->sata_dev.ap, sdev, supported: &supported); |
| 969 | if (rc) |
| 970 | return rc; |
| 971 | |
| 972 | return sysfs_emit(buf, fmt: "%d\n" , supported); |
| 973 | } |
| 974 | |
| 975 | static struct device_attribute dev_attr_sas_ncq_prio_supported = |
| 976 | __ATTR(ncq_prio_supported, S_IRUGO, sas_ncq_prio_supported_show, NULL); |
| 977 | |
| 978 | static ssize_t sas_ncq_prio_enable_show(struct device *device, |
| 979 | struct device_attribute *attr, |
| 980 | char *buf) |
| 981 | { |
| 982 | struct scsi_device *sdev = to_scsi_device(device); |
| 983 | struct domain_device *ddev = sdev_to_domain_dev(sdev); |
| 984 | bool enabled; |
| 985 | int rc; |
| 986 | |
| 987 | rc = ata_ncq_prio_enabled(ap: ddev->sata_dev.ap, sdev, enabled: &enabled); |
| 988 | if (rc) |
| 989 | return rc; |
| 990 | |
| 991 | return sysfs_emit(buf, fmt: "%d\n" , enabled); |
| 992 | } |
| 993 | |
| 994 | static ssize_t sas_ncq_prio_enable_store(struct device *device, |
| 995 | struct device_attribute *attr, |
| 996 | const char *buf, size_t len) |
| 997 | { |
| 998 | struct scsi_device *sdev = to_scsi_device(device); |
| 999 | struct domain_device *ddev = sdev_to_domain_dev(sdev); |
| 1000 | bool enable; |
| 1001 | int rc; |
| 1002 | |
| 1003 | rc = kstrtobool(s: buf, res: &enable); |
| 1004 | if (rc) |
| 1005 | return rc; |
| 1006 | |
| 1007 | rc = ata_ncq_prio_enable(ap: ddev->sata_dev.ap, sdev, enable); |
| 1008 | if (rc) |
| 1009 | return rc; |
| 1010 | |
| 1011 | return len; |
| 1012 | } |
| 1013 | |
| 1014 | static struct device_attribute dev_attr_sas_ncq_prio_enable = |
| 1015 | __ATTR(ncq_prio_enable, S_IRUGO | S_IWUSR, |
| 1016 | sas_ncq_prio_enable_show, sas_ncq_prio_enable_store); |
| 1017 | |
| 1018 | static struct attribute *sas_ata_sdev_attrs[] = { |
| 1019 | &dev_attr_sas_ncq_prio_supported.attr, |
| 1020 | &dev_attr_sas_ncq_prio_enable.attr, |
| 1021 | NULL |
| 1022 | }; |
| 1023 | |
| 1024 | static umode_t sas_ata_attr_is_visible(struct kobject *kobj, |
| 1025 | struct attribute *attr, int i) |
| 1026 | { |
| 1027 | struct device *dev = kobj_to_dev(kobj); |
| 1028 | struct scsi_device *sdev = to_scsi_device(dev); |
| 1029 | struct domain_device *ddev = sdev_to_domain_dev(sdev); |
| 1030 | |
| 1031 | if (!dev_is_sata(dev: ddev)) |
| 1032 | return 0; |
| 1033 | |
| 1034 | return attr->mode; |
| 1035 | } |
| 1036 | |
| 1037 | const struct attribute_group sas_ata_sdev_attr_group = { |
| 1038 | .attrs = sas_ata_sdev_attrs, |
| 1039 | .is_visible = sas_ata_attr_is_visible, |
| 1040 | }; |
| 1041 | EXPORT_SYMBOL_GPL(sas_ata_sdev_attr_group); |
| 1042 | |