1// SPDX-License-Identifier: GPL-2.0-only
2// Copyright (C) 2015 Broadcom Corporation
3
4#include <linux/kernel.h>
5#include <linux/err.h>
6#include <linux/clk-provider.h>
7#include <linux/io.h>
8#include <linux/of.h>
9#include <linux/of_address.h>
10
11#include <dt-bindings/clock/bcm-ns2.h>
12#include "clk-iproc.h"
13
14#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
15
16#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
17 .pwr_shift = ps, .iso_shift = is }
18
19#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
20 .p_reset_shift = prs }
21
22#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\
23 .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
24 .ka_width = kaw }
25
26#define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }
27
28#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
29 .hold_shift = hs, .bypass_shift = bs }
30
31static const struct iproc_pll_ctrl genpll_scr = {
32 .flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
33 .aon = AON_VAL(0x0, 1, 15, 12),
34 .reset = RESET_VAL(0x4, 2, 1),
35 .dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 2, 3),
36 .ndiv_int = REG_VAL(0x8, 4, 10),
37 .pdiv = REG_VAL(0x8, 0, 4),
38 .vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),
39 .status = REG_VAL(0x0, 27, 1),
40};
41
42
43static const struct iproc_clk_ctrl genpll_scr_clk[] = {
44 /* bypass_shift, the last value passed into ENABLE_VAL(), is not defined
45 * in NS2. However, it doesn't appear to be used anywhere, so setting
46 * it to 0.
47 */
48 [BCM_NS2_GENPLL_SCR_SCR_CLK] = {
49 .channel = BCM_NS2_GENPLL_SCR_SCR_CLK,
50 .flags = IPROC_CLK_AON,
51 .enable = ENABLE_VAL(0x0, 18, 12, 0),
52 .mdiv = REG_VAL(0x18, 0, 8),
53 },
54 [BCM_NS2_GENPLL_SCR_FS_CLK] = {
55 .channel = BCM_NS2_GENPLL_SCR_FS_CLK,
56 .flags = IPROC_CLK_AON,
57 .enable = ENABLE_VAL(0x0, 19, 13, 0),
58 .mdiv = REG_VAL(0x18, 8, 8),
59 },
60 [BCM_NS2_GENPLL_SCR_AUDIO_CLK] = {
61 .channel = BCM_NS2_GENPLL_SCR_AUDIO_CLK,
62 .flags = IPROC_CLK_AON,
63 .enable = ENABLE_VAL(0x0, 20, 14, 0),
64 .mdiv = REG_VAL(0x14, 0, 8),
65 },
66 [BCM_NS2_GENPLL_SCR_CH3_UNUSED] = {
67 .channel = BCM_NS2_GENPLL_SCR_CH3_UNUSED,
68 .flags = IPROC_CLK_AON,
69 .enable = ENABLE_VAL(0x0, 21, 15, 0),
70 .mdiv = REG_VAL(0x14, 8, 8),
71 },
72 [BCM_NS2_GENPLL_SCR_CH4_UNUSED] = {
73 .channel = BCM_NS2_GENPLL_SCR_CH4_UNUSED,
74 .flags = IPROC_CLK_AON,
75 .enable = ENABLE_VAL(0x0, 22, 16, 0),
76 .mdiv = REG_VAL(0x14, 16, 8),
77 },
78 [BCM_NS2_GENPLL_SCR_CH5_UNUSED] = {
79 .channel = BCM_NS2_GENPLL_SCR_CH5_UNUSED,
80 .flags = IPROC_CLK_AON,
81 .enable = ENABLE_VAL(0x0, 23, 17, 0),
82 .mdiv = REG_VAL(0x14, 24, 8),
83 },
84};
85
86static void __init ns2_genpll_scr_clk_init(struct device_node *node)
87{
88 iproc_pll_clk_setup(node, pll_ctrl: &genpll_scr, NULL, num_vco_entries: 0, clk_ctrl: genpll_scr_clk,
89 ARRAY_SIZE(genpll_scr_clk));
90}
91CLK_OF_DECLARE(ns2_genpll_src_clk, "brcm,ns2-genpll-scr",
92 ns2_genpll_scr_clk_init);
93
94static const struct iproc_pll_ctrl genpll_sw = {
95 .flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
96 .aon = AON_VAL(0x0, 1, 11, 10),
97 .reset = RESET_VAL(0x4, 2, 1),
98 .dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 2, 3),
99 .ndiv_int = REG_VAL(0x8, 4, 10),
100 .pdiv = REG_VAL(0x8, 0, 4),
101 .vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),
102 .status = REG_VAL(0x0, 13, 1),
103};
104
105static const struct iproc_clk_ctrl genpll_sw_clk[] = {
106 /* bypass_shift, the last value passed into ENABLE_VAL(), is not defined
107 * in NS2. However, it doesn't appear to be used anywhere, so setting
108 * it to 0.
109 */
110 [BCM_NS2_GENPLL_SW_RPE_CLK] = {
111 .channel = BCM_NS2_GENPLL_SW_RPE_CLK,
112 .flags = IPROC_CLK_AON,
113 .enable = ENABLE_VAL(0x0, 18, 12, 0),
114 .mdiv = REG_VAL(0x18, 0, 8),
115 },
116 [BCM_NS2_GENPLL_SW_250_CLK] = {
117 .channel = BCM_NS2_GENPLL_SW_250_CLK,
118 .flags = IPROC_CLK_AON,
119 .enable = ENABLE_VAL(0x0, 19, 13, 0),
120 .mdiv = REG_VAL(0x18, 8, 8),
121 },
122 [BCM_NS2_GENPLL_SW_NIC_CLK] = {
123 .channel = BCM_NS2_GENPLL_SW_NIC_CLK,
124 .flags = IPROC_CLK_AON,
125 .enable = ENABLE_VAL(0x0, 20, 14, 0),
126 .mdiv = REG_VAL(0x14, 0, 8),
127 },
128 [BCM_NS2_GENPLL_SW_CHIMP_CLK] = {
129 .channel = BCM_NS2_GENPLL_SW_CHIMP_CLK,
130 .flags = IPROC_CLK_AON,
131 .enable = ENABLE_VAL(0x0, 21, 15, 0),
132 .mdiv = REG_VAL(0x14, 8, 8),
133 },
134 [BCM_NS2_GENPLL_SW_PORT_CLK] = {
135 .channel = BCM_NS2_GENPLL_SW_PORT_CLK,
136 .flags = IPROC_CLK_AON,
137 .enable = ENABLE_VAL(0x0, 22, 16, 0),
138 .mdiv = REG_VAL(0x14, 16, 8),
139 },
140 [BCM_NS2_GENPLL_SW_SDIO_CLK] = {
141 .channel = BCM_NS2_GENPLL_SW_SDIO_CLK,
142 .flags = IPROC_CLK_AON,
143 .enable = ENABLE_VAL(0x0, 23, 17, 0),
144 .mdiv = REG_VAL(0x14, 24, 8),
145 },
146};
147
148static void __init ns2_genpll_sw_clk_init(struct device_node *node)
149{
150 iproc_pll_clk_setup(node, pll_ctrl: &genpll_sw, NULL, num_vco_entries: 0, clk_ctrl: genpll_sw_clk,
151 ARRAY_SIZE(genpll_sw_clk));
152}
153CLK_OF_DECLARE(ns2_genpll_sw_clk, "brcm,ns2-genpll-sw",
154 ns2_genpll_sw_clk_init);
155
156static const struct iproc_pll_ctrl lcpll_ddr = {
157 .flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
158 .aon = AON_VAL(0x0, 2, 1, 0),
159 .reset = RESET_VAL(0x4, 2, 1),
160 .dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 1, 4),
161 .ndiv_int = REG_VAL(0x8, 4, 10),
162 .pdiv = REG_VAL(0x8, 0, 4),
163 .vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),
164 .status = REG_VAL(0x0, 0, 1),
165};
166
167static const struct iproc_clk_ctrl lcpll_ddr_clk[] = {
168 /* bypass_shift, the last value passed into ENABLE_VAL(), is not defined
169 * in NS2. However, it doesn't appear to be used anywhere, so setting
170 * it to 0.
171 */
172 [BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK] = {
173 .channel = BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK,
174 .flags = IPROC_CLK_AON,
175 .enable = ENABLE_VAL(0x0, 18, 12, 0),
176 .mdiv = REG_VAL(0x14, 0, 8),
177 },
178 [BCM_NS2_LCPLL_DDR_DDR_CLK] = {
179 .channel = BCM_NS2_LCPLL_DDR_DDR_CLK,
180 .flags = IPROC_CLK_AON,
181 .enable = ENABLE_VAL(0x0, 19, 13, 0),
182 .mdiv = REG_VAL(0x14, 8, 8),
183 },
184 [BCM_NS2_LCPLL_DDR_CH2_UNUSED] = {
185 .channel = BCM_NS2_LCPLL_DDR_CH2_UNUSED,
186 .flags = IPROC_CLK_AON,
187 .enable = ENABLE_VAL(0x0, 20, 14, 0),
188 .mdiv = REG_VAL(0x10, 0, 8),
189 },
190 [BCM_NS2_LCPLL_DDR_CH3_UNUSED] = {
191 .channel = BCM_NS2_LCPLL_DDR_CH3_UNUSED,
192 .flags = IPROC_CLK_AON,
193 .enable = ENABLE_VAL(0x0, 21, 15, 0),
194 .mdiv = REG_VAL(0x10, 8, 8),
195 },
196 [BCM_NS2_LCPLL_DDR_CH4_UNUSED] = {
197 .channel = BCM_NS2_LCPLL_DDR_CH4_UNUSED,
198 .flags = IPROC_CLK_AON,
199 .enable = ENABLE_VAL(0x0, 22, 16, 0),
200 .mdiv = REG_VAL(0x10, 16, 8),
201 },
202 [BCM_NS2_LCPLL_DDR_CH5_UNUSED] = {
203 .channel = BCM_NS2_LCPLL_DDR_CH5_UNUSED,
204 .flags = IPROC_CLK_AON,
205 .enable = ENABLE_VAL(0x0, 23, 17, 0),
206 .mdiv = REG_VAL(0x10, 24, 8),
207 },
208};
209
210static void __init ns2_lcpll_ddr_clk_init(struct device_node *node)
211{
212 iproc_pll_clk_setup(node, pll_ctrl: &lcpll_ddr, NULL, num_vco_entries: 0, clk_ctrl: lcpll_ddr_clk,
213 ARRAY_SIZE(lcpll_ddr_clk));
214}
215CLK_OF_DECLARE(ns2_lcpll_ddr_clk, "brcm,ns2-lcpll-ddr",
216 ns2_lcpll_ddr_clk_init);
217
218static const struct iproc_pll_ctrl lcpll_ports = {
219 .flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
220 .aon = AON_VAL(0x0, 2, 5, 4),
221 .reset = RESET_VAL(0x4, 2, 1),
222 .dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 1, 4),
223 .ndiv_int = REG_VAL(0x8, 4, 10),
224 .pdiv = REG_VAL(0x8, 0, 4),
225 .vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),
226 .status = REG_VAL(0x0, 0, 1),
227};
228
229static const struct iproc_clk_ctrl lcpll_ports_clk[] = {
230 /* bypass_shift, the last value passed into ENABLE_VAL(), is not defined
231 * in NS2. However, it doesn't appear to be used anywhere, so setting
232 * it to 0.
233 */
234 [BCM_NS2_LCPLL_PORTS_WAN_CLK] = {
235 .channel = BCM_NS2_LCPLL_PORTS_WAN_CLK,
236 .flags = IPROC_CLK_AON,
237 .enable = ENABLE_VAL(0x0, 18, 12, 0),
238 .mdiv = REG_VAL(0x14, 0, 8),
239 },
240 [BCM_NS2_LCPLL_PORTS_RGMII_CLK] = {
241 .channel = BCM_NS2_LCPLL_PORTS_RGMII_CLK,
242 .flags = IPROC_CLK_AON,
243 .enable = ENABLE_VAL(0x0, 19, 13, 0),
244 .mdiv = REG_VAL(0x14, 8, 8),
245 },
246 [BCM_NS2_LCPLL_PORTS_CH2_UNUSED] = {
247 .channel = BCM_NS2_LCPLL_PORTS_CH2_UNUSED,
248 .flags = IPROC_CLK_AON,
249 .enable = ENABLE_VAL(0x0, 20, 14, 0),
250 .mdiv = REG_VAL(0x10, 0, 8),
251 },
252 [BCM_NS2_LCPLL_PORTS_CH3_UNUSED] = {
253 .channel = BCM_NS2_LCPLL_PORTS_CH3_UNUSED,
254 .flags = IPROC_CLK_AON,
255 .enable = ENABLE_VAL(0x0, 21, 15, 0),
256 .mdiv = REG_VAL(0x10, 8, 8),
257 },
258 [BCM_NS2_LCPLL_PORTS_CH4_UNUSED] = {
259 .channel = BCM_NS2_LCPLL_PORTS_CH4_UNUSED,
260 .flags = IPROC_CLK_AON,
261 .enable = ENABLE_VAL(0x0, 22, 16, 0),
262 .mdiv = REG_VAL(0x10, 16, 8),
263 },
264 [BCM_NS2_LCPLL_PORTS_CH5_UNUSED] = {
265 .channel = BCM_NS2_LCPLL_PORTS_CH5_UNUSED,
266 .flags = IPROC_CLK_AON,
267 .enable = ENABLE_VAL(0x0, 23, 17, 0),
268 .mdiv = REG_VAL(0x10, 24, 8),
269 },
270};
271
272static void __init ns2_lcpll_ports_clk_init(struct device_node *node)
273{
274 iproc_pll_clk_setup(node, pll_ctrl: &lcpll_ports, NULL, num_vco_entries: 0, clk_ctrl: lcpll_ports_clk,
275 ARRAY_SIZE(lcpll_ports_clk));
276}
277CLK_OF_DECLARE(ns2_lcpll_ports_clk, "brcm,ns2-lcpll-ports",
278 ns2_lcpll_ports_clk_init);
279

source code of linux/drivers/clk/bcm/clk-ns2.c