/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */

/* Copyright (c) 2011-2014 PLUMgrid, http://plumgrid.com

*

* This program is free software; you can redistribute it and/or

* modify it under the terms of version 2 of the GNU General Public

* License as published by the Free Software Foundation.

*/

#ifndef _UAPI__LINUX_BPF_H__

#define _UAPI__LINUX_BPF_H__

#include <linux/types.h>

#include <linux/bpf_common.h>

/* Extended instruction set based on top of classic BPF */

/* instruction classes */

#define BPF_JMP32 0x06 /* jmp mode in word width */

#define BPF_ALU64 0x07 /* alu mode in double word width */

/* ld/ldx fields */

#define BPF_DW 0x18 /* double word (64-bit) */

#define BPF_ATOMIC 0xc0 /* atomic memory ops - op type in immediate */

#define BPF_XADD 0xc0 /* exclusive add - legacy name */

/* alu/jmp fields */

#define BPF_MOV 0xb0 /* mov reg to reg */

#define BPF_ARSH 0xc0 /* sign extending arithmetic shift right */

/* change endianness of a register */

#define BPF_END 0xd0 /* flags for endianness conversion: */

#define BPF_TO_LE 0x00 /* convert to little-endian */

#define BPF_TO_BE 0x08 /* convert to big-endian */

#define BPF_FROM_LE BPF_TO_LE

#define BPF_FROM_BE BPF_TO_BE

/* jmp encodings */

#define BPF_JNE 0x50 /* jump != */

#define BPF_JLT 0xa0 /* LT is unsigned, '<' */

#define BPF_JLE 0xb0 /* LE is unsigned, '<=' */

#define BPF_JSGT 0x60 /* SGT is signed '>', GT in x86 */

#define BPF_JSGE 0x70 /* SGE is signed '>=', GE in x86 */

#define BPF_JSLT 0xc0 /* SLT is signed, '<' */

#define BPF_JSLE 0xd0 /* SLE is signed, '<=' */

#define BPF_CALL 0x80 /* function call */

#define BPF_EXIT 0x90 /* function return */

/* atomic op type fields (stored in immediate) */

#define BPF_FETCH 0x01 /* not an opcode on its own, used to build others */

#define BPF_XCHG (0xe0 | BPF_FETCH) /* atomic exchange */

#define BPF_CMPXCHG (0xf0 | BPF_FETCH) /* atomic compare-and-write */

/* Register numbers */

enum {

BPF_REG_0 = 0,

BPF_REG_1,

BPF_REG_2,

BPF_REG_3,

BPF_REG_4,

BPF_REG_5,

BPF_REG_6,

BPF_REG_7,

BPF_REG_8,

BPF_REG_9,

BPF_REG_10,

__MAX_BPF_REG,

};

/* BPF has 10 general purpose 64-bit registers and stack frame. */

#define MAX_BPF_REG __MAX_BPF_REG

struct bpf_insn {

__u8 code; /* opcode */

__u8 dst_reg:4; /* dest register */

__u8 src_reg:4; /* source register */

__s16 off; /* signed offset */

__s32 imm; /* signed immediate constant */

};

/* Key of an a BPF_MAP_TYPE_LPM_TRIE entry */

struct bpf_lpm_trie_key {

__u32 prefixlen; /* up to 32 for AF_INET, 128 for AF_INET6 */

__u8 data[0]; /* Arbitrary size */

};

struct bpf_cgroup_storage_key {

__u64 cgroup_inode_id; /* cgroup inode id */

__u32 attach_type; /* program attach type (enum bpf_attach_type) */

};

enum bpf_cgroup_iter_order {

BPF_CGROUP_ITER_ORDER_UNSPEC = 0,

BPF_CGROUP_ITER_SELF_ONLY, /* process only a single object. */

BPF_CGROUP_ITER_DESCENDANTS_PRE, /* walk descendants in pre-order. */

BPF_CGROUP_ITER_DESCENDANTS_POST, /* walk descendants in post-order. */

BPF_CGROUP_ITER_ANCESTORS_UP, /* walk ancestors upward. */

};

union bpf_iter_link_info {

struct {

__u32 map_fd;

} map;

struct {

enum bpf_cgroup_iter_order order;

/* At most one of cgroup_fd and cgroup_id can be non-zero. If

* both are zero, the walk starts from the default cgroup v2

* root. For walking v1 hierarchy, one should always explicitly

* specify cgroup_fd.

*/

__u32 cgroup_fd;

__u64 cgroup_id;

} cgroup;

/* Parameters of task iterators. */

struct {

__u32 tid;

__u32 pid;

__u32 pid_fd;

} task;

};

/* BPF syscall commands, see bpf(2) man-page for more details. */

/**

* DOC: eBPF Syscall Preamble

*

* The operation to be performed by the **bpf**\ () system call is determined

* by the *cmd* argument. Each operation takes an accompanying argument,

* provided via *attr*, which is a pointer to a union of type *bpf_attr* (see

* below). The size argument is the size of the union pointed to by *attr*.

*/

/**

* DOC: eBPF Syscall Commands

*

* BPF_MAP_CREATE

* Description

* Create a map and return a file descriptor that refers to the

* map. The close-on-exec file descriptor flag (see **fcntl**\ (2))

* is automatically enabled for the new file descriptor.

*

* Applying **close**\ (2) to the file descriptor returned by

* **BPF_MAP_CREATE** will delete the map (but see NOTES).

*

* Return

* A new file descriptor (a nonnegative integer), or -1 if an

* error occurred (in which case, *errno* is set appropriately).

*

* BPF_MAP_LOOKUP_ELEM

* Description

* Look up an element with a given *key* in the map referred to

* by the file descriptor *map_fd*.

*

* The *flags* argument may be specified as one of the

* following:

*

* **BPF_F_LOCK**

* Look up the value of a spin-locked map without

* returning the lock. This must be specified if the

* elements contain a spinlock.

*

* Return

* Returns zero on success. On error, -1 is returned and *errno*

* is set appropriately.

*

* BPF_MAP_UPDATE_ELEM

* Description

* Create or update an element (key/value pair) in a specified map.

*

* The *flags* argument should be specified as one of the

* following:

*

* **BPF_ANY**

* Create a new element or update an existing element.

* **BPF_NOEXIST**

* Create a new element only if it did not exist.

* **BPF_EXIST**

* Update an existing element.

* **BPF_F_LOCK**

* Update a spin_lock-ed map element.

*

* Return

* Returns zero on success. On error, -1 is returned and *errno*

* is set appropriately.

*

* May set *errno* to **EINVAL**, **EPERM**, **ENOMEM**,

* **E2BIG**, **EEXIST**, or **ENOENT**.

*

* **E2BIG**

* The number of elements in the map reached the

* *max_entries* limit specified at map creation time.

* **EEXIST**

* If *flags* specifies **BPF_NOEXIST** and the element

* with *key* already exists in the map.

* **ENOENT**

* If *flags* specifies **BPF_EXIST** and the element with

* *key* does not exist in the map.

*

* BPF_MAP_DELETE_ELEM

* Description

* Look up and delete an element by key in a specified map.

*

* Return

* Returns zero on success. On error, -1 is returned and *errno*

* is set appropriately.

*

* BPF_MAP_GET_NEXT_KEY

* Description

* Look up an element by key in a specified map and return the key

* of the next element. Can be used to iterate over all elements

* in the map.

*

* Return

* Returns zero on success. On error, -1 is returned and *errno*

* is set appropriately.

*

* The following cases can be used to iterate over all elements of

* the map:

*

* * If *key* is not found, the operation returns zero and sets

* the *next_key* pointer to the key of the first element.

* * If *key* is found, the operation returns zero and sets the

* *next_key* pointer to the key of the next element.

* * If *key* is the last element, returns -1 and *errno* is set

* to **ENOENT**.

*

* May set *errno* to **ENOMEM**, **EFAULT**, **EPERM**, or

* **EINVAL** on error.

*

* BPF_PROG_LOAD

* Description

* Verify and load an eBPF program, returning a new file

* descriptor associated with the program.

*

* Applying **close**\ (2) to the file descriptor returned by

* **BPF_PROG_LOAD** will unload the eBPF program (but see NOTES).

*

* The close-on-exec file descriptor flag (see **fcntl**\ (2)) is

* automatically enabled for the new file descriptor.

*

* Return

* A new file descriptor (a nonnegative integer), or -1 if an

* error occurred (in which case, *errno* is set appropriately).

*

* BPF_OBJ_PIN

* Description

* Pin an eBPF program or map referred by the specified *bpf_fd*

* to the provided *pathname* on the filesystem.

*

* The *pathname* argument must not contain a dot (".").

*

* On success, *pathname* retains a reference to the eBPF object,

* preventing deallocation of the object when the original

* *bpf_fd* is closed. This allow the eBPF object to live beyond

* **close**\ (\ *bpf_fd*\ ), and hence the lifetime of the parent

* process.

*

* Applying **unlink**\ (2) or similar calls to the *pathname*

* unpins the object from the filesystem, removing the reference.

* If no other file descriptors or filesystem nodes refer to the

* same object, it will be deallocated (see NOTES).

*

* The filesystem type for the parent directory of *pathname* must

* be **BPF_FS_MAGIC**.

*

* Return

* Returns zero on success. On error, -1 is returned and *errno*

* is set appropriately.

*

* BPF_OBJ_GET

* Description

* Open a file descriptor for the eBPF object pinned to the

* specified *pathname*.

*

* Return

* A new file descriptor (a nonnegative integer), or -1 if an

* error occurred (in which case, *errno* is set appropriately).

*

* BPF_PROG_ATTACH

* Description

* Attach an eBPF program to a *target_fd* at the specified

* *attach_type* hook.

*

* The *attach_type* specifies the eBPF attachment point to

* attach the program to, and must be one of *bpf_attach_type*

* (see below).

*

* The *attach_bpf_fd* must be a valid file descriptor for a

* loaded eBPF program of a cgroup, flow dissector, LIRC, sockmap

* or sock_ops type corresponding to the specified *attach_type*.

*

* The *target_fd* must be a valid file descriptor for a kernel

* object which depends on the attach type of *attach_bpf_fd*:

*

* **BPF_PROG_TYPE_CGROUP_DEVICE**,

* **BPF_PROG_TYPE_CGROUP_SKB**,

* **BPF_PROG_TYPE_CGROUP_SOCK**,

* **BPF_PROG_TYPE_CGROUP_SOCK_ADDR**,

* **BPF_PROG_TYPE_CGROUP_SOCKOPT**,

* **BPF_PROG_TYPE_CGROUP_SYSCTL**,

* **BPF_PROG_TYPE_SOCK_OPS**

*

* Control Group v2 hierarchy with the eBPF controller

* enabled. Requires the kernel to be compiled with

* **CONFIG_CGROUP_BPF**.

*

* **BPF_PROG_TYPE_FLOW_DISSECTOR**

*

* Network namespace (eg /proc/self/ns/net).

*

* **BPF_PROG_TYPE_LIRC_MODE2**

*

* LIRC device path (eg /dev/lircN). Requires the kernel

* to be compiled with **CONFIG_BPF_LIRC_MODE2**.

*

* **BPF_PROG_TYPE_SK_SKB**,

* **BPF_PROG_TYPE_SK_MSG**

*

* eBPF map of socket type (eg **BPF_MAP_TYPE_SOCKHASH**).

*

* Return

* Returns zero on success. On error, -1 is returned and *errno*

* is set appropriately.

*

* BPF_PROG_DETACH

* Description

* Detach the eBPF program associated with the *target_fd* at the

* hook specified by *attach_type*. The program must have been

* previously attached using **BPF_PROG_ATTACH**.

*

* Return

* Returns zero on success. On error, -1 is returned and *errno*

* is set appropriately.

*

* BPF_PROG_TEST_RUN

* Description

* Run the eBPF program associated with the *prog_fd* a *repeat*

* number of times against a provided program context *ctx_in* and

* data *data_in*, and return the modified program context

* *ctx_out*, *data_out* (for example, packet data), result of the

* execution *retval*, and *duration* of the test run.

*

* The sizes of the buffers provided as input and output

* parameters *ctx_in*, *ctx_out*, *data_in*, and *data_out* must

* be provided in the corresponding variables *ctx_size_in*,

* *ctx_size_out*, *data_size_in*, and/or *data_size_out*. If any

* of these parameters are not provided (ie set to NULL), the

* corresponding size field must be zero.

*

* Some program types have particular requirements:

*

* **BPF_PROG_TYPE_SK_LOOKUP**

* *data_in* and *data_out* must be NULL.

*

* **BPF_PROG_TYPE_RAW_TRACEPOINT**,

* **BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE**

*

* *ctx_out*, *data_in* and *data_out* must be NULL.

* *repeat* must be zero.

*

* BPF_PROG_RUN is an alias for BPF_PROG_TEST_RUN.

*

* Return

* Returns zero on success. On error, -1 is returned and *errno*

* is set appropriately.

*

* **ENOSPC**

* Either *data_size_out* or *ctx_size_out* is too small.

* **ENOTSUPP**

* This command is not supported by the program type of

* the program referred to by *prog_fd*.

*

* BPF_PROG_GET_NEXT_ID

* Description

* Fetch the next eBPF program currently loaded into the kernel.

*

* Looks for the eBPF program with an id greater than *start_id*

* and updates *next_id* on success. If no other eBPF programs

* remain with ids higher than *start_id*, returns -1 and sets

* *errno* to **ENOENT**.

*

* Return

* Returns zero on success. On error, or when no id remains, -1

* is returned and *errno* is set appropriately.

*

* BPF_MAP_GET_NEXT_ID

* Description

* Fetch the next eBPF map currently loaded into the kernel.

*

* Looks for the eBPF map with an id greater than *start_id*

* and updates *next_id* on success. If no other eBPF maps

* remain with ids higher than *start_id*, returns -1 and sets

* *errno* to **ENOENT**.

*

* Return

* Returns zero on success. On error, or when no id remains, -1

* is returned and *errno* is set appropriately.

*

* BPF_PROG_GET_FD_BY_ID

* Description

* Open a file descriptor for the eBPF program corresponding to

* *prog_id*.

*

* Return

* A new file descriptor (a nonnegative integer), or -1 if an

* error occurred (in which case, *errno* is set appropriately).

*

* BPF_MAP_GET_FD_BY_ID

* Description

* Open a file descriptor for the eBPF map corresponding to

* *map_id*.

*

* Return

* A new file descriptor (a nonnegative integer), or -1 if an

* error occurred (in which case, *errno* is set appropriately).

*

* BPF_OBJ_GET_INFO_BY_FD

* Description

* Obtain information about the eBPF object corresponding to

* *bpf_fd*.

*

* Populates up to *info_len* bytes of *info*, which will be in

* one of the following formats depending on the eBPF object type

* of *bpf_fd*:

*

* * **struct bpf_prog_info**

* * **struct bpf_map_info**

* * **struct bpf_btf_info**

* * **struct bpf_link_info**

*

* Return

* Returns zero on success. On error, -1 is returned and *errno*

* is set appropriately.

*

* BPF_PROG_QUERY

* Description

* Obtain information about eBPF programs associated with the

* specified *attach_type* hook.

*

* The *target_fd* must be a valid file descriptor for a kernel

* object which depends on the attach type of *attach_bpf_fd*:

*

* **BPF_PROG_TYPE_CGROUP_DEVICE**,

* **BPF_PROG_TYPE_CGROUP_SKB**,

* **BPF_PROG_TYPE_CGROUP_SOCK**,

* **BPF_PROG_TYPE_CGROUP_SOCK_ADDR**,

* **BPF_PROG_TYPE_CGROUP_SOCKOPT**,

* **BPF_PROG_TYPE_CGROUP_SYSCTL**,

* **BPF_PROG_TYPE_SOCK_OPS**

*

* Control Group v2 hierarchy with the eBPF controller

* enabled. Requires the kernel to be compiled with

* **CONFIG_CGROUP_BPF**.

*

* **BPF_PROG_TYPE_FLOW_DISSECTOR**

*

* Network namespace (eg /proc/self/ns/net).

*

* **BPF_PROG_TYPE_LIRC_MODE2**

*

* LIRC device path (eg /dev/lircN). Requires the kernel

* to be compiled with **CONFIG_BPF_LIRC_MODE2**.

*

* **BPF_PROG_QUERY** always fetches the number of programs

* attached and the *attach_flags* which were used to attach those

* programs. Additionally, if *prog_ids* is nonzero and the number

* of attached programs is less than *prog_cnt*, populates

* *prog_ids* with the eBPF program ids of the programs attached

* at *target_fd*.

*

* The following flags may alter the result:

*

* **BPF_F_QUERY_EFFECTIVE**

* Only return information regarding programs which are

* currently effective at the specified *target_fd*.

*

* Return

* Returns zero on success. On error, -1 is returned and *errno*

* is set appropriately.

*

* BPF_RAW_TRACEPOINT_OPEN

* Description

* Attach an eBPF program to a tracepoint *name* to access kernel

* internal arguments of the tracepoint in their raw form.

*

* The *prog_fd* must be a valid file descriptor associated with

* a loaded eBPF program of type **BPF_PROG_TYPE_RAW_TRACEPOINT**.

*

* No ABI guarantees are made about the content of tracepoint

* arguments exposed to the corresponding eBPF program.

*

* Applying **close**\ (2) to the file descriptor returned by

* **BPF_RAW_TRACEPOINT_OPEN** will delete the map (but see NOTES).

*

* Return

* A new file descriptor (a nonnegative integer), or -1 if an

* error occurred (in which case, *errno* is set appropriately).

*

* BPF_BTF_LOAD

* Description

* Verify and load BPF Type Format (BTF) metadata into the kernel,

* returning a new file descriptor associated with the metadata.

* BTF is described in more detail at

* https://www.kernel.org/doc/html/latest/bpf/btf.html.

*

* The *btf* parameter must point to valid memory providing

* *btf_size* bytes of BTF binary metadata.

*

* The returned file descriptor can be passed to other **bpf**\ ()

* subcommands such as **BPF_PROG_LOAD** or **BPF_MAP_CREATE** to

* associate the BTF with those objects.

*

* Similar to **BPF_PROG_LOAD**, **BPF_BTF_LOAD** has optional

* parameters to specify a *btf_log_buf*, *btf_log_size* and

* *btf_log_level* which allow the kernel to return freeform log

* output regarding the BTF verification process.

*

* Return

* A new file descriptor (a nonnegative integer), or -1 if an

* error occurred (in which case, *errno* is set appropriately).

*

* BPF_BTF_GET_FD_BY_ID

* Description

* Open a file descriptor for the BPF Type Format (BTF)

* corresponding to *btf_id*.

*

* Return

* A new file descriptor (a nonnegative integer), or -1 if an

* error occurred (in which case, *errno* is set appropriately).

*

* BPF_TASK_FD_QUERY

* Description

* Obtain information about eBPF programs associated with the

* target process identified by *pid* and *fd*.

*

* If the *pid* and *fd* are associated with a tracepoint, kprobe

* or uprobe perf event, then the *prog_id* and *fd_type* will

* be populated with the eBPF program id and file descriptor type

* of type **bpf_task_fd_type**. If associated with a kprobe or

* uprobe, the *probe_offset* and *probe_addr* will also be

* populated. Optionally, if *buf* is provided, then up to

* *buf_len* bytes of *buf* will be populated with the name of

* the tracepoint, kprobe or uprobe.

*

* The resulting *prog_id* may be introspected in deeper detail

* using **BPF_PROG_GET_FD_BY_ID** and **BPF_OBJ_GET_INFO_BY_FD**.

*

* Return

* Returns zero on success. On error, -1 is returned and *errno*

* is set appropriately.

*

* BPF_MAP_LOOKUP_AND_DELETE_ELEM

* Description

* Look up an element with the given *key* in the map referred to

* by the file descriptor *fd*, and if found, delete the element.

*

* For **BPF_MAP_TYPE_QUEUE** and **BPF_MAP_TYPE_STACK** map

* types, the *flags* argument needs to be set to 0, but for other

* map types, it may be specified as:

*

* **BPF_F_LOCK**

* Look up and delete the value of a spin-locked map

* without returning the lock. This must be specified if

* the elements contain a spinlock.

*

* The **BPF_MAP_TYPE_QUEUE** and **BPF_MAP_TYPE_STACK** map types

* implement this command as a "pop" operation, deleting the top

* element rather than one corresponding to *key*.

* The *key* and *key_len* parameters should be zeroed when

* issuing this operation for these map types.

*

* This command is only valid for the following map types:

* * **BPF_MAP_TYPE_QUEUE**

* * **BPF_MAP_TYPE_STACK**

* * **BPF_MAP_TYPE_HASH**

* * **BPF_MAP_TYPE_PERCPU_HASH**

* * **BPF_MAP_TYPE_LRU_HASH**

* * **BPF_MAP_TYPE_LRU_PERCPU_HASH**

*

* Return

* Returns zero on success. On error, -1 is returned and *errno*

* is set appropriately.

*

* BPF_MAP_FREEZE

* Description

* Freeze the permissions of the specified map.

*

* Write permissions may be frozen by passing zero *flags*.

* Upon success, no future syscall invocations may alter the

* map state of *map_fd*. Write operations from eBPF programs

* are still possible for a frozen map.

*

* Not supported for maps of type **BPF_MAP_TYPE_STRUCT_OPS**.

*

* Return

* Returns zero on success. On error, -1 is returned and *errno*

* is set appropriately.

*

* BPF_BTF_GET_NEXT_ID

* Description

* Fetch the next BPF Type Format (BTF) object currently loaded

* into the kernel.

*

* Looks for the BTF object with an id greater than *start_id*

* and updates *next_id* on success. If no other BTF objects

* remain with ids higher than *start_id*, returns -1 and sets

* *errno* to **ENOENT**.

*

* Return

* Returns zero on success. On error, or when no id remains, -1

* is returned and *errno* is set appropriately.

*

* BPF_MAP_LOOKUP_BATCH

* Description

* Iterate and fetch multiple elements in a map.

*

* Two opaque values are used to manage batch operations,

* *in_batch* and *out_batch*. Initially, *in_batch* must be set

* to NULL to begin the batched operation. After each subsequent

* **BPF_MAP_LOOKUP_BATCH**, the caller should pass the resultant

* *out_batch* as the *in_batch* for the next operation to

* continue iteration from the current point.

*

* The *keys* and *values* are output parameters which must point

* to memory large enough to hold *count* items based on the key

* and value size of the map *map_fd*. The *keys* buffer must be

* of *key_size* * *count*. The *values* buffer must be of

* *value_size* * *count*.

*

* The *elem_flags* argument may be specified as one of the

* following:

*

* **BPF_F_LOCK**

* Look up the value of a spin-locked map without

* returning the lock. This must be specified if the

* elements contain a spinlock.

*

* On success, *count* elements from the map are copied into the

* user buffer, with the keys copied into *keys* and the values

* copied into the corresponding indices in *values*.

*

* If an error is returned and *errno* is not **EFAULT**, *count*

* is set to the number of successfully processed elements.

*

* Return

* Returns zero on success. On error, -1 is returned and *errno*

* is set appropriately.

*

* May set *errno* to **ENOSPC** to indicate that *keys* or

* *values* is too small to dump an entire bucket during

* iteration of a hash-based map type.

*

* BPF_MAP_LOOKUP_AND_DELETE_BATCH

* Description

* Iterate and delete all elements in a map.

*

* This operation has the same behavior as

* **BPF_MAP_LOOKUP_BATCH** with two exceptions:

*

* * Every element that is successfully returned is also deleted

* from the map. This is at least *count* elements. Note that

* *count* is both an input and an output parameter.

* * Upon returning with *errno* set to **EFAULT**, up to

* *count* elements may be deleted without returning the keys

* and values of the deleted elements.

*

* Return

* Returns zero on success. On error, -1 is returned and *errno*

* is set appropriately.

*

* BPF_MAP_UPDATE_BATCH

* Description

* Update multiple elements in a map by *key*.

*

* The *keys* and *values* are input parameters which must point

* to memory large enough to hold *count* items based on the key

* and value size of the map *map_fd*. The *keys* buffer must be

* of *key_size* * *count*. The *values* buffer must be of

* *value_size* * *count*.

*

* Each element specified in *keys* is sequentially updated to the

* value in the corresponding index in *values*. The *in_batch*

* and *out_batch* parameters are ignored and should be zeroed.

*

* The *elem_flags* argument should be specified as one of the

* following:

*

* **BPF_ANY**

* Create new elements or update a existing elements.

* **BPF_NOEXIST**

* Create new elements only if they do not exist.

* **BPF_EXIST**

* Update existing elements.

* **BPF_F_LOCK**

* Update spin_lock-ed map elements. This must be

* specified if the map value contains a spinlock.

*

* On success, *count* elements from the map are updated.

*

* If an error is returned and *errno* is not **EFAULT**, *count*

* is set to the number of successfully processed elements.

*

* Return

* Returns zero on success. On error, -1 is returned and *errno*

* is set appropriately.

*

* May set *errno* to **EINVAL**, **EPERM**, **ENOMEM**, or

* **E2BIG**. **E2BIG** indicates that the number of elements in

* the map reached the *max_entries* limit specified at map

* creation time.

*

* May set *errno* to one of the following error codes under

* specific circumstances:

*

* **EEXIST**

* If *flags* specifies **BPF_NOEXIST** and the element

* with *key* already exists in the map.

* **ENOENT**

* If *flags* specifies **BPF_EXIST** and the element with

* *key* does not exist in the map.

*

* BPF_MAP_DELETE_BATCH

* Description

* Delete multiple elements in a map by *key*.

*

* The *keys* parameter is an input parameter which must point

* to memory large enough to hold *count* items based on the key

* size of the map *map_fd*, that is, *key_size* * *count*.

*

* Each element specified in *keys* is sequentially deleted. The

* *in_batch*, *out_batch*, and *values* parameters are ignored

* and should be zeroed.

*

* The *elem_flags* argument may be specified as one of the

* following:

*

* **BPF_F_LOCK**

* Look up the value of a spin-locked map without

* returning the lock. This must be specified if the

* elements contain a spinlock.

*

* On success, *count* elements from the map are updated.

*

* If an error is returned and *errno* is not **EFAULT**, *count*

* is set to the number of successfully processed elements. If

* *errno* is **EFAULT**, up to *count* elements may be been

* deleted.

*

* Return

* Returns zero on success. On error, -1 is returned and *errno*

* is set appropriately.

*

* BPF_LINK_CREATE

* Description

* Attach an eBPF program to a *target_fd* at the specified

* *attach_type* hook and return a file descriptor handle for

* managing the link.

*

* Return

* A new file descriptor (a nonnegative integer), or -1 if an

* error occurred (in which case, *errno* is set appropriately).

*

* BPF_LINK_UPDATE

* Description

* Update the eBPF program in the specified *link_fd* to

* *new_prog_fd*.

*

* Return

* Returns zero on success. On error, -1 is returned and *errno*

* is set appropriately.

*

* BPF_LINK_GET_FD_BY_ID

* Description

* Open a file descriptor for the eBPF Link corresponding to

* *link_id*.

*

* Return

* A new file descriptor (a nonnegative integer), or -1 if an

* error occurred (in which case, *errno* is set appropriately).

*

* BPF_LINK_GET_NEXT_ID

* Description

* Fetch the next eBPF link currently loaded into the kernel.

*

* Looks for the eBPF link with an id greater than *start_id*

* and updates *next_id* on success. If no other eBPF links

* remain with ids higher than *start_id*, returns -1 and sets

* *errno* to **ENOENT**.

*

* Return

* Returns zero on success. On error, or when no id remains, -1

* is returned and *errno* is set appropriately.

*

* BPF_ENABLE_STATS

* Description

* Enable eBPF runtime statistics gathering.

*

* Runtime statistics gathering for the eBPF runtime is disabled

* by default to minimize the corresponding performance overhead.

* This command enables statistics globally.

*

* Multiple programs may independently enable statistics.

* After gathering the desired statistics, eBPF runtime statistics

* may be disabled again by calling **close**\ (2) for the file

* descriptor returned by this function. Statistics will only be

* disabled system-wide when all outstanding file descriptors

* returned by prior calls for this subcommand are closed.

*

* Return

* A new file descriptor (a nonnegative integer), or -1 if an

* error occurred (in which case, *errno* is set appropriately).

*

* BPF_ITER_CREATE

* Description

* Create an iterator on top of the specified *link_fd* (as

* previously created using **BPF_LINK_CREATE**) and return a

* file descriptor that can be used to trigger the iteration.

*

* If the resulting file descriptor is pinned to the filesystem

* using **BPF_OBJ_PIN**, then subsequent **read**\ (2) syscalls

* for that path will trigger the iterator to read kernel state

* using the eBPF program attached to *link_fd*.

*

* Return

* A new file descriptor (a nonnegative integer), or -1 if an

* error occurred (in which case, *errno* is set appropriately).

*

* BPF_LINK_DETACH

* Description

* Forcefully detach the specified *link_fd* from its

* corresponding attachment point.

*

* Return

* Returns zero on success. On error, -1 is returned and *errno*

* is set appropriately.

*

* BPF_PROG_BIND_MAP

* Description

* Bind a map to the lifetime of an eBPF program.

*

* The map identified by *map_fd* is bound to the program

* identified by *prog_fd* and only released when *prog_fd* is

* released. This may be used in cases where metadata should be

* associated with a program which otherwise does not contain any

* references to the map (for example, embedded in the eBPF

* program instructions).

*

* Return

* Returns zero on success. On error, -1 is returned and *errno*

* is set appropriately.

*

* NOTES

* eBPF objects (maps and programs) can be shared between processes.

*

* * After **fork**\ (2), the child inherits file descriptors

* referring to the same eBPF objects.

* * File descriptors referring to eBPF objects can be transferred over

* **unix**\ (7) domain sockets.

* * File descriptors referring to eBPF objects can be duplicated in the

* usual way, using **dup**\ (2) and similar calls.

* * File descriptors referring to eBPF objects can be pinned to the

* filesystem using the **BPF_OBJ_PIN** command of **bpf**\ (2).

*

* An eBPF object is deallocated only after all file descriptors referring

* to the object have been closed and no references remain pinned to the

* filesystem or attached (for example, bound to a program or device).

*/

enum bpf_cmd {

BPF_MAP_CREATE,

BPF_MAP_LOOKUP_ELEM,

BPF_MAP_UPDATE_ELEM,

BPF_MAP_DELETE_ELEM,

BPF_MAP_GET_NEXT_KEY,

BPF_PROG_LOAD,

BPF_OBJ_PIN,

BPF_OBJ_GET,

BPF_PROG_ATTACH,

BPF_PROG_DETACH,

BPF_PROG_TEST_RUN,

BPF_PROG_RUN = BPF_PROG_TEST_RUN,

BPF_PROG_GET_NEXT_ID,

BPF_MAP_GET_NEXT_ID,

BPF_PROG_GET_FD_BY_ID,

BPF_MAP_GET_FD_BY_ID,

BPF_OBJ_GET_INFO_BY_FD,

BPF_PROG_QUERY,

BPF_RAW_TRACEPOINT_OPEN,

BPF_BTF_LOAD,

BPF_BTF_GET_FD_BY_ID,

BPF_TASK_FD_QUERY,

BPF_MAP_LOOKUP_AND_DELETE_ELEM,

BPF_MAP_FREEZE,

BPF_BTF_GET_NEXT_ID,

BPF_MAP_LOOKUP_BATCH,

BPF_MAP_LOOKUP_AND_DELETE_BATCH,

BPF_MAP_UPDATE_BATCH,

BPF_MAP_DELETE_BATCH,

BPF_LINK_CREATE,

BPF_LINK_UPDATE,

BPF_LINK_GET_FD_BY_ID,

BPF_LINK_GET_NEXT_ID,

BPF_ENABLE_STATS,

BPF_ITER_CREATE,

BPF_LINK_DETACH,

BPF_PROG_BIND_MAP,

};

enum bpf_map_type {

BPF_MAP_TYPE_UNSPEC,

BPF_MAP_TYPE_HASH,

BPF_MAP_TYPE_ARRAY,

BPF_MAP_TYPE_PROG_ARRAY,

BPF_MAP_TYPE_PERF_EVENT_ARRAY,

BPF_MAP_TYPE_PERCPU_HASH,

BPF_MAP_TYPE_PERCPU_ARRAY,

BPF_MAP_TYPE_STACK_TRACE,

BPF_MAP_TYPE_CGROUP_ARRAY,

BPF_MAP_TYPE_LRU_HASH,

BPF_MAP_TYPE_LRU_PERCPU_HASH,

BPF_MAP_TYPE_LPM_TRIE,

BPF_MAP_TYPE_ARRAY_OF_MAPS,

BPF_MAP_TYPE_HASH_OF_MAPS,

BPF_MAP_TYPE_DEVMAP,

BPF_MAP_TYPE_SOCKMAP,

BPF_MAP_TYPE_CPUMAP,

BPF_MAP_TYPE_XSKMAP,

BPF_MAP_TYPE_SOCKHASH,

BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED,

/* BPF_MAP_TYPE_CGROUP_STORAGE is available to bpf programs attaching

* to a cgroup. The newer BPF_MAP_TYPE_CGRP_STORAGE is available to

* both cgroup-attached and other progs and supports all functionality

* provided by BPF_MAP_TYPE_CGROUP_STORAGE. So mark

* BPF_MAP_TYPE_CGROUP_STORAGE deprecated.

*/

BPF_MAP_TYPE_CGROUP_STORAGE = BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED,

BPF_MAP_TYPE_REUSEPORT_SOCKARRAY,

BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE,

BPF_MAP_TYPE_QUEUE,

BPF_MAP_TYPE_STACK,

BPF_MAP_TYPE_SK_STORAGE,

BPF_MAP_TYPE_DEVMAP_HASH,

BPF_MAP_TYPE_STRUCT_OPS,

BPF_MAP_TYPE_RINGBUF,

BPF_MAP_TYPE_INODE_STORAGE,

BPF_MAP_TYPE_TASK_STORAGE,

BPF_MAP_TYPE_BLOOM_FILTER,

BPF_MAP_TYPE_USER_RINGBUF,

BPF_MAP_TYPE_CGRP_STORAGE,

};

/* Note that tracing related programs such as

* BPF_PROG_TYPE_{KPROBE,TRACEPOINT,PERF_EVENT,RAW_TRACEPOINT}

* are not subject to a stable API since kernel internal data

* structures can change from release to release and may

* therefore break existing tracing BPF programs. Tracing BPF

* programs correspond to /a/ specific kernel which is to be

* analyzed, and not /a/ specific kernel /and/ all future ones.

*/

enum bpf_prog_type {

BPF_PROG_TYPE_UNSPEC,

BPF_PROG_TYPE_SOCKET_FILTER,

BPF_PROG_TYPE_KPROBE,

BPF_PROG_TYPE_SCHED_CLS,

BPF_PROG_TYPE_SCHED_ACT,

BPF_PROG_TYPE_TRACEPOINT,

BPF_PROG_TYPE_XDP,

BPF_PROG_TYPE_PERF_EVENT,

BPF_PROG_TYPE_CGROUP_SKB,

BPF_PROG_TYPE_CGROUP_SOCK,

BPF_PROG_TYPE_LWT_IN,

BPF_PROG_TYPE_LWT_OUT,

BPF_PROG_TYPE_LWT_XMIT,

BPF_PROG_TYPE_SOCK_OPS,

BPF_PROG_TYPE_SK_SKB,

BPF_PROG_TYPE_CGROUP_DEVICE,

BPF_PROG_TYPE_SK_MSG,

BPF_PROG_TYPE_RAW_TRACEPOINT,

BPF_PROG_TYPE_CGROUP_SOCK_ADDR,

BPF_PROG_TYPE_LWT_SEG6LOCAL,

BPF_PROG_TYPE_LIRC_MODE2,

BPF_PROG_TYPE_SK_REUSEPORT,

BPF_PROG_TYPE_FLOW_DISSECTOR,

BPF_PROG_TYPE_CGROUP_SYSCTL,

BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE,

BPF_PROG_TYPE_CGROUP_SOCKOPT,

BPF_PROG_TYPE_TRACING,

BPF_PROG_TYPE_STRUCT_OPS,

BPF_PROG_TYPE_EXT,

BPF_PROG_TYPE_LSM,

BPF_PROG_TYPE_SK_LOOKUP,

BPF_PROG_TYPE_SYSCALL, /* a program that can execute syscalls */

};

enum bpf_attach_type {

BPF_CGROUP_INET_INGRESS,

BPF_CGROUP_INET_EGRESS,

BPF_CGROUP_INET_SOCK_CREATE,

BPF_CGROUP_SOCK_OPS,

BPF_SK_SKB_STREAM_PARSER,

BPF_SK_SKB_STREAM_VERDICT,

BPF_CGROUP_DEVICE,

BPF_SK_MSG_VERDICT,

BPF_CGROUP_INET4_BIND,