[skip ci] Update .po files

Autobuild bot on TravisCI · Autobuild bot on TravisCI · commit ce568d25656e · 2021-02-22T16:34:25.000Z
diff --git a/library/idle.po b/library/idle.po
@@ -11,7 +11,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Python 3.8\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2021-01-27 16:18+0000\n"
+"POT-Creation-Date: 2021-02-21 16:31+0000\n"
 "PO-Revision-Date: 2020-05-30 12:04+0000\n"
 "Last-Translator: tomo, 2020\n"
 "Language-Team: Japanese (https://www.transifex.com/python-doc/teams/5390/ja/)\n"
@@ -1322,14 +1322,6 @@ msgstr ""
 
 #: ../../library/idle.rst:729
 msgid ""
-"When Shell has the focus, it controls the keyboard and screen.  This is "
-"normally transparent, but functions that directly access the keyboard and "
-"screen will not work.  These include system-specific functions that "
-"determine whether a key has been pressed and if so, which."
-msgstr ""
-
-#: ../../library/idle.rst:734
-msgid ""
 "IDLE's standard stream replacements are not inherited by subprocesses "
 "created in the execution process, whether directly by user code or by "
 "modules such as multiprocessing.  If such subprocess use ``input`` from "
@@ -1338,32 +1330,40 @@ msgid ""
 " attached to that window for input and output."
 msgstr ""
 
-#: ../../library/idle.rst:741
+#: ../../library/idle.rst:736
 msgid ""
-"The IDLE code running in the execution process adds frames to the call stack"
-" that would not be there otherwise.  IDLE wraps ``sys.getrecursionlimit`` "
-"and ``sys.setrecursionlimit`` to reduce the effect of the additional stack "
-"frames."
+"If ``sys`` is reset by user code, such as with ``importlib.reload(sys)``, "
+"IDLE's changes are lost and input from the keyboard and output to the screen"
+" will not work correctly."
+msgstr ""
+
+#: ../../library/idle.rst:740
+msgid ""
+"When Shell has the focus, it controls the keyboard and screen.  This is "
+"normally transparent, but functions that directly access the keyboard and "
+"screen will not work.  These include system-specific functions that "
+"determine whether a key has been pressed and if so, which."
 msgstr ""
 
 #: ../../library/idle.rst:745
 msgid ""
-"If ``sys`` is reset by user code, such as with ``importlib.reload(sys)``, "
-"IDLE's changes are lost and input from the keyboard and output to the screen"
-" will not work correctly."
+"The IDLE code running in the execution process adds frames to the call stack"
+" that would not be there otherwise.  IDLE wraps ``sys.getrecursionlimit`` "
+"and ``sys.setrecursionlimit`` to reduce the effect of the additional stack "
+"frames."
 msgstr ""
 
-#: ../../library/idle.rst:749
+#: ../../library/idle.rst:750
 msgid ""
 "When user code raises SystemExit either directly or by calling sys.exit, "
 "IDLE returns to a Shell prompt instead of exiting."
 msgstr ""
 
-#: ../../library/idle.rst:753
+#: ../../library/idle.rst:754
 msgid "User output in Shell"
 msgstr ""
 
-#: ../../library/idle.rst:755
+#: ../../library/idle.rst:756
 msgid ""
 "When a program outputs text, the result is determined by the corresponding "
 "output device.  When IDLE executes user code, ``sys.stdout`` and "
@@ -1373,7 +1373,7 @@ msgid ""
 "rather than production runs."
 msgstr ""
 
-#: ../../library/idle.rst:762
+#: ../../library/idle.rst:763
 msgid ""
 "For instance, Shell never throws away output.  A program that sends "
 "unlimited output to Shell will eventually fill memory, resulting in a memory"
@@ -1382,7 +1382,7 @@ msgid ""
 "lines, with 300 the default."
 msgstr ""
 
-#: ../../library/idle.rst:768
+#: ../../library/idle.rst:769
 msgid ""
 "A Tk Text widget, and hence IDLE's Shell, displays characters (codepoints) "
 "in the BMP (Basic Multilingual Plane) subset of Unicode.  Which characters "
@@ -1396,7 +1396,7 @@ msgid ""
 "spacing behavior.) ::"
 msgstr ""
 
-#: ../../library/idle.rst:786
+#: ../../library/idle.rst:787
 msgid ""
 "The ``repr`` function is used for interactive echo of expression values.  It"
 " returns an altered version of the input string in which control codes, some"
@@ -1405,13 +1405,13 @@ msgid ""
 " regardless of how they are displayed."
 msgstr ""
 
-#: ../../library/idle.rst:792
+#: ../../library/idle.rst:793
 msgid ""
 "Normal and error output are generally kept separate (on separate lines) from"
 " code input and each other.  They each get different highlight colors."
 msgstr ""
 
-#: ../../library/idle.rst:795
+#: ../../library/idle.rst:796
 msgid ""
 "For SyntaxError tracebacks, the normal '^' marking where the error was "
 "detected is replaced by coloring the text with an error highlight. When code"
@@ -1420,7 +1420,7 @@ msgid ""
 "opened if necessary."
 msgstr ""
 
-#: ../../library/idle.rst:801
+#: ../../library/idle.rst:802
 msgid ""
 "Shell has a special facility for squeezing output lines down to a 'Squeezed "
 "text' label.  This is done automatically for output over N lines (N = 50 by "
@@ -1430,18 +1430,18 @@ msgid ""
 "scrolling."
 msgstr ""
 
-#: ../../library/idle.rst:809
+#: ../../library/idle.rst:810
 msgid ""
 "Squeezed output is expanded in place by double-clicking the label. It can "
 "also be sent to the clipboard or a separate view window by right-clicking "
 "the label."
 msgstr ""
 
-#: ../../library/idle.rst:814
+#: ../../library/idle.rst:815
 msgid "Developing tkinter applications"
 msgstr ""
 
-#: ../../library/idle.rst:816
+#: ../../library/idle.rst:817
 msgid ""
 "IDLE is intentionally different from standard Python in order to facilitate "
 "development of tkinter programs.  Enter ``import tkinter as tk; root = "
@@ -1453,7 +1453,7 @@ msgid ""
 " visibly changes in standard Python until one enters ``root.update()``."
 msgstr ""
 
-#: ../../library/idle.rst:825
+#: ../../library/idle.rst:826
 msgid ""
 "Most tkinter programs run ``root.mainloop()``, which usually does not return"
 " until the tk app is destroyed.  If the program is run with ``python -i`` or"
@@ -1462,19 +1462,19 @@ msgid ""
 "with."
 msgstr ""
 
-#: ../../library/idle.rst:831
+#: ../../library/idle.rst:832
 msgid ""
 "When running a tkinter program from an IDLE editor, one can comment out the "
 "mainloop call.  One then gets a shell prompt immediately and can interact "
 "with the live application.  One just has to remember to re-enable the "
 "mainloop call when running in standard Python."
 msgstr ""
 
-#: ../../library/idle.rst:837
+#: ../../library/idle.rst:838
 msgid "Running without a subprocess"
 msgstr "サブプロセスを起こさずに起動する"
 
-#: ../../library/idle.rst:839
+#: ../../library/idle.rst:840
 msgid ""
 "By default, IDLE executes user code in a separate subprocess via a socket, "
 "which uses the internal loopback interface.  This connection is not "
@@ -1484,7 +1484,7 @@ msgstr ""
 "デフォルトでは、IDLE "
 "でのユーザコードの実行は、内部的なループバックインターフェイスを使用する、ソケット経由の分離されたサブプロセスで行われます。この接続は外部からは見えませんし、インターネットとのデータの送受信は行われません。ファイアウォールソフトウェアの警告が発生しても、無視して構いません。"
 
-#: ../../library/idle.rst:844
+#: ../../library/idle.rst:845
 msgid ""
 "If the attempt to make the socket connection fails, Idle will notify you. "
 "Such failures are sometimes transient, but if persistent, the problem may be"
@@ -1493,7 +1493,7 @@ msgid ""
 " command line switch."
 msgstr ""
 
-#: ../../library/idle.rst:850
+#: ../../library/idle.rst:851
 msgid ""
 "If IDLE is started with the -n command line switch it will run in a single "
 "process and will not create the subprocess which runs the RPC Python "
@@ -1513,15 +1513,15 @@ msgstr ""
 "しないといけませんし、変更を反映するには、すべての特定の項目 (``from foo import baz`` など) "
 "を再インポートしないといけません。これらの理由から、可能なら常にデフォルトのサブプロセスを起こすモードで IDLE を起動するのが吉です。"
 
-#: ../../library/idle.rst:865
+#: ../../library/idle.rst:866
 msgid "Help and preferences"
 msgstr "ヘルプとお好み設定"
 
-#: ../../library/idle.rst:870
+#: ../../library/idle.rst:871
 msgid "Help sources"
 msgstr ""
 
-#: ../../library/idle.rst:872
+#: ../../library/idle.rst:873
 msgid ""
 "Help menu entry \"IDLE Help\" displays a formatted html version of the IDLE "
 "chapter of the Library Reference.  The result, in a read-only tkinter text "
@@ -1531,7 +1531,7 @@ msgid ""
 "the opened box."
 msgstr ""
 
-#: ../../library/idle.rst:880
+#: ../../library/idle.rst:881
 msgid ""
 "Help menu entry \"Python Docs\" opens the extensive sources of help, "
 "including tutorials, available at ``docs.python.org/x.y``, where 'x.y' is "
@@ -1540,17 +1540,17 @@ msgid ""
 "instead."
 msgstr ""
 
-#: ../../library/idle.rst:886
+#: ../../library/idle.rst:887
 msgid ""
 "Selected URLs can be added or removed from the help menu at any time using "
 "the General tab of the Configure IDLE dialog."
 msgstr ""
 
-#: ../../library/idle.rst:892
+#: ../../library/idle.rst:893
 msgid "Setting preferences"
 msgstr "Setting preferences [お好み設定]"
 
-#: ../../library/idle.rst:894
+#: ../../library/idle.rst:895
 msgid ""
 "The font preferences, highlighting, keys, and general preferences can be "
 "changed via Configure IDLE on the Option menu. Non-default user settings are"
@@ -1559,7 +1559,7 @@ msgid ""
 " or more of the files in ``.idlerc``."
 msgstr ""
 
-#: ../../library/idle.rst:900
+#: ../../library/idle.rst:901
 msgid ""
 "On the Font tab, see the text sample for the effect of font face and size on"
 " multiple characters in multiple languages.  Edit the sample to add other "
@@ -1568,30 +1568,30 @@ msgid ""
 "the top of the sample and try changing first size and then font."
 msgstr ""
 
-#: ../../library/idle.rst:907
+#: ../../library/idle.rst:908
 msgid ""
 "On the Highlights and Keys tab, select a built-in or custom color theme and "
 "key set.  To use a newer built-in color theme or key set with older IDLEs, "
 "save it as a new custom theme or key set and it well be accessible to older "
 "IDLEs."
 msgstr ""
 
-#: ../../library/idle.rst:913
+#: ../../library/idle.rst:914
 msgid "IDLE on macOS"
 msgstr ""
 
-#: ../../library/idle.rst:915
+#: ../../library/idle.rst:916
 msgid ""
 "Under System Preferences: Dock, one can set \"Prefer tabs when opening "
 "documents\" to \"Always\".  This setting is not compatible with the "
 "tk/tkinter GUI framework used by IDLE, and it breaks a few IDLE features."
 msgstr ""
 
-#: ../../library/idle.rst:920
+#: ../../library/idle.rst:921
 msgid "Extensions"
 msgstr "Extensions [拡張]"
 
-#: ../../library/idle.rst:922
+#: ../../library/idle.rst:923
 msgid ""
 "IDLE contains an extension facility.  Preferences for extensions can be "
 "changed with the Extensions tab of the preferences dialog. See the beginning"
diff --git a/reference/expressions.po b/reference/expressions.po
@@ -12,7 +12,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Python 3.8\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2021-01-01 16:06+0000\n"
+"POT-Creation-Date: 2021-02-21 16:31+0000\n"
 "PO-Revision-Date: 2020-05-30 12:15+0000\n"
 "Last-Translator: Yusuke Miyazaki <miyazaki.dev@gmail.com>, 2020\n"
 "Language-Team: Japanese (https://www.transifex.com/python-doc/teams/5390/ja/)\n"
@@ -594,22 +594,16 @@ msgstr ""
 
 #: ../../reference/expressions.rst:479
 msgid ""
-"When ``yield from <expr>`` is used, it treats the supplied expression as a "
-"subiterator. All values produced by that subiterator are passed directly to "
-"the caller of the current generator's methods. Any values passed in with "
-":meth:`~generator.send` and any exceptions passed in with "
+"When ``yield from <expr>`` is used, the supplied expression must be an "
+"iterable. The values produced by iterating that iterable are passed directly"
+" to the caller of the current generator's methods. Any values passed in with"
+" :meth:`~generator.send` and any exceptions passed in with "
 ":meth:`~generator.throw` are passed to the underlying iterator if it has the"
 " appropriate methods.  If this is not the case, then :meth:`~generator.send`"
 " will raise :exc:`AttributeError` or :exc:`TypeError`, while "
 ":meth:`~generator.throw` will just raise the passed in exception "
 "immediately."
 msgstr ""
-"``yield from <expr>`` "
-"を使用した場合、与えられた式はサブイテレータとして扱われます。サブイテレータによって生成されたすべての値は現在のジェネレータのメソッドの呼び出し元へ直接渡されます。:meth:`~generator.send`"
-" で渡されたあらゆる値と :meth:`~generator.throw` "
-"で渡されたあらゆる例外は根底のイテレータに適切なメソッドがあれば渡されます。適切なメソッドがない場合、:meth:`~generator.send` は"
-" :exc:`AttributeError` か :exc:`TypeError` を、:meth:`~generator.throw` "
-"は渡された例外を即座に送出します。"
 
 #: ../../reference/expressions.rst:488
 msgid ""
diff --git a/whatsnew/changelog.po b/whatsnew/changelog.po
