all: Change PYB message prefix to MPY.

mcauser · dpgeorge · commit 812969d615e1 · 2019-02-12T15:18:33.000+11:00
Replaces "PYB: soft reboot" with "MPY: soft reboot", etc.

Having a consistent prefix across ports reduces the difference between
ports, which is a general goal.  And this change won't break pyboard.py
because that tool only looks for "soft reboot".
diff --git a/docs/pyboard/tutorial/repl.rst b/docs/pyboard/tutorial/repl.rst
@@ -96,8 +96,8 @@ If something goes wrong, you can reset the board in two ways. The first is to pr
 at the MicroPython prompt, which performs a soft reset.  You will see a message something like ::
 
     >>> 
-    PYB: sync filesystems
-    PYB: soft reboot
+    MPY: sync filesystems
+    MPY: soft reboot
     Micro Python v1.0 on 2014-05-03; PYBv1.0 with STM32F405RG
     Type "help()" for more information.
     >>>
diff --git a/docs/reference/repl.rst b/docs/reference/repl.rst
@@ -174,8 +174,8 @@ variables no longer exist:
 
 .. code-block:: python
 
-    PYB: sync filesystems
-    PYB: soft reboot
+    MPY: sync filesystems
+    MPY: soft reboot
     MicroPython v1.5-51-g6f70283-dirty on 2015-10-30; PYBv1.0 with STM32F405RG
     Type "help()" for more information.
     >>> dir()
diff --git a/docs/wipy/tutorial/repl.rst b/docs/wipy/tutorial/repl.rst
@@ -120,7 +120,7 @@ If something goes wrong, you can reset the board in two ways. The first is to pr
 at the MicroPython prompt, which performs a soft reset.  You will see a message something like::
 
     >>> 
-    PYB: soft reboot
+    MPY: soft reboot
     MicroPython v1.4.6-146-g1d8b5e5 on 2015-10-21; WiPy with CC3200
     Type "help()" for more information.
     >>>
diff --git a/lib/utils/pyexec.c b/lib/utils/pyexec.c
@@ -450,7 +450,7 @@ int pyexec_friendly_repl(void) {
             // do the user a favor and reenable interrupts.
             if (query_irq() == IRQ_STATE_DISABLED) {
                 enable_irq(IRQ_STATE_ENABLED);
-                mp_hal_stdout_tx_str("PYB: enabling IRQs\r\n");
+                mp_hal_stdout_tx_str("MPY: enabling IRQs\r\n");
             }
         }
         #endif
diff --git a/ports/cc3200/mptask.c b/ports/cc3200/mptask.c
@@ -234,7 +234,7 @@ void TASK_MicroPython (void *pvParameters) {
 
     // soft reset
     pyb_sleep_signal_soft_reset();
-    mp_printf(&mp_plat_print, "PYB: soft reboot\n");
+    mp_printf(&mp_plat_print, "MPY: soft reboot\n");
 
     // disable all callbacks to avoid undefined behaviour
     // when coming out of a soft reset
diff --git a/ports/esp32/main.c b/ports/esp32/main.c
@@ -138,7 +138,7 @@ void mp_task(void *pvParameter) {
 
     gc_sweep_all();
 
-    mp_hal_stdout_tx_str("PYB: soft reboot\r\n");
+    mp_hal_stdout_tx_str("MPY: soft reboot\r\n");
 
     // deinitialise peripherals
     machine_pins_deinit();
diff --git a/ports/esp8266/main.c b/ports/esp8266/main.c
@@ -86,7 +86,7 @@ STATIC void mp_reset(void) {
 
 void soft_reset(void) {
     gc_sweep_all();
-    mp_hal_stdout_tx_str("PYB: soft reboot\r\n");
+    mp_hal_stdout_tx_str("MPY: soft reboot\r\n");
     mp_hal_delay_us(10000); // allow UART to flush output
     mp_reset();
     #if MICROPY_REPL_EVENT_DRIVEN
diff --git a/ports/pic16bit/main.c b/ports/pic16bit/main.c
@@ -87,7 +87,7 @@ int main(int argc, char **argv) {
         }
     }
 
-    printf("PYB: soft reboot\n");
+    printf("MPY: soft reboot\n");
     mp_deinit();
     goto soft_reset;
 }
diff --git a/ports/stm32/main.c b/ports/stm32/main.c
@@ -203,7 +203,7 @@ MP_NOINLINE STATIC bool init_flash_fs(uint reset_mode) {
         if (res == FR_OK) {
             // success creating fresh LFS
         } else {
-            printf("PYB: can't create flash filesystem\n");
+            printf("MPY: can't create flash filesystem\n");
             return false;
         }
 
@@ -235,7 +235,7 @@ MP_NOINLINE STATIC bool init_flash_fs(uint reset_mode) {
         // mount sucessful
     } else {
     fail:
-        printf("PYB: can't mount flash\n");
+        printf("MPY: can't mount flash\n");
         return false;
     }
 
@@ -349,7 +349,7 @@ STATIC bool init_sdcard_fs(void) {
     }
 
     if (first_part) {
-        printf("PYB: can't mount SD card\n");
+        printf("MPY: can't mount SD card\n");
         return false;
     } else {
         return true;
@@ -763,11 +763,11 @@ void stm32_main(uint32_t reset_mode) {
     // soft reset
 
     #if MICROPY_HW_ENABLE_STORAGE
-    printf("PYB: sync filesystems\n");
+    printf("MPY: sync filesystems\n");
     storage_flush();
     #endif
 
-    printf("PYB: soft reboot\n");
+    printf("MPY: soft reboot\n");
     #if MICROPY_PY_NETWORK
     mod_network_deinit();
     #endif
diff --git a/ports/teensy/main.c b/ports/teensy/main.c
@@ -343,7 +343,7 @@ int main(void) {
         }
     }
 
-    printf("PYB: soft reboot\n");
+    printf("MPY: soft reboot\n");
 
 //    first_soft_reset = false;
     goto soft_reset;

Original file line number	Diff line number	Diff line change
`@@ -450,7 +450,7 @@ int pyexec_friendly_repl(void) {`
`450`	`450`	`// do the user a favor and reenable interrupts.`
`451`	`451`	`if (query_irq() == IRQ_STATE_DISABLED) {`
`452`	`452`	`enable_irq(IRQ_STATE_ENABLED);`
`453`		`- mp_hal_stdout_tx_str("PYB: enabling IRQs\r\n");`
	`453`	`+ mp_hal_stdout_tx_str("MPY: enabling IRQs\r\n");`
`454`	`454`	`}`
`455`	`455`	`}`
`456`	`456`	`#endif`
Original file line number	Diff line number	Diff line change
`@@ -87,7 +87,7 @@ int main(int argc, char **argv) {`
`87`	`87`	`}`
`88`	`88`	`}`
`89`	`89`
`90`		`- printf("PYB: soft reboot\n");`
	`90`	`+ printf("MPY: soft reboot\n");`
`91`	`91`	`mp_deinit();`
`92`	`92`	`goto soft_reset;`
`93`	`93`	`}`
Original file line number	Diff line number	Diff line change
`@@ -343,7 +343,7 @@ int main(void) {`
`343`	`343`	`}`
`344`	`344`	`}`
`345`	`345`
`346`		`- printf("PYB: soft reboot\n");`
	`346`	`+ printf("MPY: soft reboot\n");`
`347`	`347`
`348`	`348`	`// first_soft_reset = false;`
`349`	`349`	`goto soft_reset;`