script "DocsBuilder"

# The max number allowed

constant kFilesPerClump = 50

# Probably not a good idea to change this...

constant kClumpNamePrefix = "revDocClump_"

private function docsBuilderGetSourceDirectory

return builderDocsFolder()

end docsBuilderGetSourceDirectory

private function docsBuilderGetOutputDirectory

return builderBuiltDocsFolder()

end docsBuilderGetOutputDirectory

command docsBuilderProgressUpdate pProgress, pMessage

builderLog "message", pMessage

end docsBuilderProgressUpdate

command errorShow pError

builderLog "error", pError

throw pError

end errorShow

command docsBuilderRun pEdition, pVersion

set the itemdelimiter to "."

if item 1 of pVersion > 7 then

docsBuilderGenerateDocsNew

exit docsBuilderRun

end if

local tSourceDir, tOutputDir

put docsBuilderGetSourceDirectory() into tSourceDir

put docsBuilderGetOutputDirectory() & "/packaged_xml" into tOutputDir

start using stack (builderIdeRepoFolder() & slash & "Toolset/palettes/revdocumentationlibrary.rev")

builderLog "report", "Building docs into" && tOutputDir

buildDocumentation tSourceDir & "/dictionary", tSourceDir & "/glossary", tOutputDir & "/dictionary", tOutputDir & "/glossary", tOutputDir, "docsBuilderProgressUpdate", the long id of me

builderLog "report", "Building docs into" && tOutputDir && "complete"

end docsBuilderRun

command buildDocumentation pDictionaryInputDirectory, pGlossaryInputDirectory, pDictionaryOutputDirectory, pGlossaryOutputDirectory, pManifestOutputDirectory, pCallback, pCallbackTarget

initializeProgress pCallback, pCallbackTarget

reportProgress "Cleaning Directory", 0, "Cleaning Existing Structure"

# Create the subdirectories we need.

pathEnsure (pDictionaryOutputDirectory)

pathEnsure (pGlossaryOutputDirectory)

# Ensure the subDirectories we need were created.

if there is no folder pDictionaryOutputDirectory then

errorShow "libDocumentClumpGenerateAll", "Invalid output directory: " & pDictionaryOutputDirectory

exit buildDocumentation

end if

if there is no folder pGlossaryOutputDirectory then

errorShow "libDocumentClumpGenerateAll", "Invalid output directory: " & pGlossaryOutputDirectory

exit buildDocumentation

end if

# Clean any existing clumps out of memory to prevent interference.

deleteExistingClumpsFromMemory

local tFileToDirectory, tLinkLookup

# Get the the file reference information

libDocumentationListXMLFiles pGlossaryInputDirectory, tFileToDirectory

reportProgress "Glossary", 0, "Listed XML files"

libDocumentationListXMLFiles pDictionaryInputDirectory, tFileToDirectory

reportProgress "Dictionary", 0, "Listed XML files"

#Get the cross reference information for the internal links

libDocumentationCreateDocRefs tFileToDirectory

put libCreateLookupTable (tFileToDirectory) into tLinkLookup

# Build XRef symmetry - create symmetry entries in the lookup array

libDocumentationCreateXRefSymmertry tFileToDirectory, tLinkLookup

# Compile the dictionary and glossary into a collection of stacks with

# compressed custom properties.

compileDictionaryIntoStacks pDictionaryInputDirectory, pDictionaryOutputDirectory, tFileToDirectory, tLinkLookup

compileGlossaryIntoStacks pGlossaryInputDirectory, pGlossaryOutputDirectory, tFileToDirectory, tLinkLookup

# Create a manifest in the packaged_xml directory as the files are dynamic.

createManifest pManifestOutputDirectory

reportProgress empty, 100, "Done"

end buildDocumentation

local sProgress

local sProgressCallback

local sProgressCallbackTarget

local sProgressStepStatus

// HSC - tested - complies with current dictionary format

private command initializeProgress pCallback, pCallbackTarget

put empty into sProgress

put empty into sProgressStepStatus

# The callback is optional.

if pCallback is not empty and pCallbackTarget is not empty then

put pCallback into sProgressCallback

put pCallbackTarget into sProgressCallbackTarget

end if

end initializeProgress

local sLastTime

private command reportProgress pStep, pPercentage, pMessage

# This lets us configure the approximate proportions each step is of the whole process,

# so that the progress is fairly smooth. (These are quite rough...)

local tProportion

switch pStep

case "Dictionary"

put 20 into tProportion

break

case "Glossary"

put 1 into tProportion

break

case "Creating glossary index"

put 4 into tProportion

break

case "Manifest"

put "4" into tProportion

break

case "Cleaning Directory"

put 11 into tProportion

break

case "Creating dictionary index"

put 33 into tProportion

break

case "Verifying dictionary"

put 37 into tProportion

break

end switch

# When a step is complete, add its proportion to the current progress.

# The current progess is the overall progress plus the step percentage.

local tStepPercentage

if pPercentage = 100 then

if sProgressStepStatus[pStep] is not "Complete" then

put "Complete" into sProgressStepStatus[pStep]

add tProportion to sProgress

end if

put 0 into tStepPercentage

else

put ((pPercentage / 100) * tProportion) into tStepPercentage

end if

local tCurrentProgress

put sProgress + tStepPercentage into tCurrentProgress

# Here we can send a message back to the caller to indicate progress

# of the docs building, but for now we just display progress on the card.

if sProgressCallback is not empty and sProgressCallbackTarget is not empty then

send sProgressCallback && "tCurrentProgress, pMessage" to sProgressCallbackTarget

end if

if the mode of me is not 0 and the visible of me then

if the millisecs - sLastTime > 500 then

statusSet pMessage

set the thumbPosition of scrollbar 1 of me to tCurrentProgress

put the millisecs into sLastTime

end if

end if

end reportProgress

private command statusSet pMessage

put pMessage into field "Status" of me

end statusSet

// HSC - tested - complies with current dictionary format

private command deleteExistingClumpsFromMemory

repeat for each line tStack in the mainstacks

if tStack begins with "revDocClump_" then

lock messages

delete stack tStack

unlock messages

end if

end repeat

end deleteExistingClumpsFromMemory

private command compileGlossaryIntoStacks pInputDirectory, pOutputDirectory, @pFileToDirectory, @pLinkLookup

local tArrIndex, tFilePath, tRelFilePath, tKeyNumber

local tOldPath

put the directory into tOldPath

local tPath

put pInputDirectory into tPath

set the directory to tPath

reportProgress "Glossary", 0, "Listed XML files"

-- Now loop through the list of files and add the file data to the relevant clump

local tFileNumber, tClumpNumber, tClumpName, tCount = 1

repeat with tArrIndex = 1 to the number of elements of pFileToDirectory

-- Work out which clump to add the file to from its name (number)

if pFileToDirectory[tArrIndex]["type"] is "glossary" then

put ((tArrIndex - 1) div kFilesPerClump) + 1 into tClumpNumber

put kClumpNamePrefix & tClumpNumber into tClumpName

if there is no stack tClumpName then

libDocumentationClumpCreate tClumpNumber, pOutputDirectory

end if

-- Get the relative file path of the entry

put pFileToDirectory[tArrIndex]["path"] into tFilepath

set the itemDelimiter to slash

put item -3 to -1 of tFilepath into tRelFilepath

put libDocumentationClumpAddTo(tClumpName, tArrIndex, pFileToDirectory, pOutputDirectory, pLinkLookup) into tKeyNumber

reportProgress "Glossary", ((tArrIndex / the number of elements of pFileToDirectory) * 100), "Added glossary entry: " & item -1 of tFilePath

//reportProgress "Glossary", ((tArrIndex / the number of lines of pFileToDirectory) * 100), "Added glossary entry: " & item -1 of tFilePath

set the itemDelimiter to comma

end if

end repeat

-- Clean up

repeat for each line tStack in the mainStacks

if char 1 to (the length of kClumpNamePrefix) of tStack is kClumpNamePrefix then

delete stack tStack

end if

end repeat

reportProgress "Glossary", 100, "Glossary Built"

# Build the index for the xml files

libDocumentationBuildGlossaryIndex pFileToDirectory, pOutputDirectory

end compileGlossaryIntoStacks

// HSC - tested - complies with current dictionary format

private command libDocumentationListXMLFiles pDirectory, @rFileToPath

local tOldDirectory

put the directory into tOldDirectory

set the directory to pDirectory

local tDirectories

put the folders into tDirectories

filter tDirectories without ".."

local tFiles, tItems

put the number of elements of rFileToPath into tItems

repeat for each line tDirectory in tDirectories

set the directory to pDirectory & slash & tDirectory

put the files into tFiles

filter tFiles with "*.xml"

repeat for each line tFile in tFiles

if tFile is not "" then

add 1 to tItems

put pDirectory & slash & tDirectory & slash & tFile into rFileToPath[tItems]["path"]

put tFile into rFileToPath[tItems]["name"]

if the length of tDirectory is 1 then

put "glossary" into rFileToPath[tItems]["type"]

else

put tDirectory into rFileToPath[tItems]["type"]

end if

end if

end repeat

end repeat

set the directory to tOldDirectory

end libDocumentationListXMLFiles

private command libDocumentationCreateDocRefs @rFileToDirectory

local tTree, tName, tArrIndex

repeat with tArrIndex = 1 to the number of elements of rFileToDirectory

open file rFileToDirectory[tArrIndex]["path"] for read

read from file rFileToDirectory[tArrIndex]["path"] until EOF

// extract the <name> or <term> from the files and update the rFileToDirectory information

put revCreateXMLTree(it, false, true, false) into tTree

if tTree is not an integer then

errorShow "Failed to process preferences file with error: " & tTree

return empty

end if

put revXMLNodeContents(tTree, "doc/name") into tName

if matchText(tName,"xmlerr") then

put revXMLNodeContents(tTree, "doc/term") into tName

end if

if matchText(tName,"xmlerr") then

//breakpoint

end if

// Build XRef symmetry - add see also links to the array structure

local tXrefs, tXref, tXrefToReplace, tTextStart, tTextEnd, tOffsetFound

put libGetTextLocation (it, "<references>", "</references>", tTextStart, tTextEnd) into tXrefs

if tTextStart is not 0 and tTextEnd is not 0 then

replace "<references>" with "" in tXrefs

put true into tOffsetFound

set the itemDelimiter to space

repeat while tOffsetFound

// need to include the tStartTags in another repeat loop this will be for the new files.

put libGetTextLocation (tXrefs, "<", ">", tTextStart, tTextEnd) into tXrefToReplace

if tTextStart is 0 and tTextEnd is 0 then

put false into tOffsetFound

else

put tXrefToReplace into tXref

replace "<" with "" in tXref

replace ">" with "" in tXref

replace "tag=" with "" in tXref

replace quote with "" in tXref

replace tXrefToReplace with tXref in tXrefs

if character 1 of tXref is not "/" then

put tXref & return after rFileToDirectory[tArrIndex]["xrefs"]

end if

end if

end repeat

end if

// need the following line as revXMLNodeContents decides to turn "&amp;" into "&"

put escapeEntities (tName) into tName

put tName into rFileToDirectory[tArrIndex]["ref"]

close file rFileToDirectory[tArrIndex]["path"]

end repeat

end libDocumentationCreateDocRefs

command libDocumentationCreateXRefSymmertry @rFileToDirectory, @rLinkLookup

local tArrIndex, tReferenceTo

repeat with tArrIndex = 1 to the number of elements of rFileToDirectory

if "xrefs" is among the keys of rFileToDirectory[tArrIndex] then

repeat for each line tReferenceTo in rFileToDirectory[tArrIndex]["xrefs"]

if rFileToDirectory[tArrIndex]["type"] && rFileToDirectory[tArrIndex]["ref"] is not among the lines of rFileToDirectory[rLinkLookup[tReferenceTo]]["xrefs"] then

put rFileToDirectory[tArrIndex]["type"] && rFileToDirectory[tArrIndex]["ref"] & return after rFileToDirectory[rLinkLookup[tReferenceTo]]["xrefs"]

end if

end repeat

end if

end repeat

end libDocumentationCreateXRefSymmertry

private command createManifest pDirectory

reportProgress "Manifest", 0, "Listing files for manifest"

local tFiles

put utilityEnumerateDirectory(pDirectory) into tFiles

reportProgress "Manifest", 70, "Finished listing manifest files"

local tManifest

repeat for each line tFile in tFiles

if the last char of tFile is slash then

# Don't include directories

next repeat

end if

if tFile ends with "/Manifest" then

next repeat

end if

put "file," & slash & tFile & return after tManifest

end repeat

delete the last char of tManifest

local tResult

put tManifest into url ("file:" & pDirectory & "/Manifest")

put the result into tResult

if tResult is not empty then

errorShow "Failed to write manifest at location: " & pDirectory & "/Manifest" & return & "With error: " & tResult

exit createManifest

end if

reportProgress "Manifest", 100, "Finished creating manifest"

end createManifest

# Stolen from standalone builder.

private function utilityEnumerateDirectory pDirectory, pPrefix

local tOldDirectory, tResult

put the folder into tOldDirectory

set the folder to pDirectory

# OK-2008-09-10 : Bug 7147 - Prevent the possibility of an infinite loop by

# returning empty if the directory cannot be set to pDirectory

if the folder is not pDirectory then

return empty

end if

repeat for each line tSubDirectory in the folders

if tSubDirectory is among the items of ".,.." then

next repeat

end if

# For our purposes we need the directory first, so it can be created ahead of file creation..

put pPrefix & tSubDirectory & "/" & return after tResult

get utilityEnumerateDirectory(pDirectory & "/" & tSubDirectory, pPrefix & tSubDirectory & "/")

if it is not empty then

put it & return after tResult

end if

end repeat

local tFileSize

repeat for each line tFile in the files

put pPrefix & tFile & return after tResult

end repeat

set the folder to tOldDirectory

delete the last char of tResult

return tResult

end utilityEnumerateDirectory

private function extractFileNumberFromPath pPath

set the itemDelimiter to slash

get item -1 of pPath

set the itemDelimiter to "."

return item 1 of it

end extractFileNumberFromPath

private command compileDictionaryIntoStacks pInputDirectory, pOutputDirectory, @pFileToDirectory, @pLinkLookup

local tDocDirectory, tDirectory, tDirectories, tFile, tFiles, tFilepath

local tCurrentClumpNumber, tIndexData, tKeyNumber, tRelFilepath, tOutputDirectory

local tXMLFiles, tFileToPath

local tOldPath

put the directory into tOldPath

local tPath

put pInputDirectory into tPath

set the directory to tPath

reportProgress "Dictionary", 0, "Listed XML files"

-- Now loop through the list of files and add the file data to the relevant clump

local tFileNumber, tClumpNumber, tClumpName, tCount = 1

repeat with tArrIndex = 1 to the number of elements of pFileToDirectory

-- Work out which clump to add the file to from its name (number)

if pFileToDirectory[tArrIndex]["type"] is not "glossary" then

put ((tArrIndex - 1) div kFilesPerClump) + 1 into tClumpNumber

put kClumpNamePrefix & tClumpNumber into tClumpName

if there is no stack tClumpName then

libDocumentationClumpCreate tClumpNumber, pOutputDirectory

end if

-- Get the relative file path of the entry

put pFileToDirectory[tArrIndex]["path"] into tFilepath

set the itemDelimiter to slash

put item -3 to -1 of tFilepath into tRelFilepath

put libDocumentationClumpAddTo(tClumpName, tArrIndex, pFileToDirectory, pOutputDirectory, pLinkLookup) into tKeyNumber

if tArrIndex mod 10 is 0 then

reportProgress "Dictionary", ((tArrIndex / the number of elements of pFileToDirectory) * 100), "Added dictionary entry: " & item -1 of tFilePath

end if

set the itemDelimiter to comma

end if

end repeat

-- Clean up

repeat for each line tStack in the mainStacks

if char 1 to (the length of kClumpNamePrefix) of tStack is kClumpNamePrefix then

delete stack tStack

end if

end repeat

reportProgress "Dictionary", 100, "Dictionary built"

# Build the index for the xml files

libDocumentationBuildDictionaryIndex pFileToDirectory, pOutputDirectory

# Verify that the documentation is complete, we only bother doing this with the dictionary,

# as broken glossary entries don't matter as much.

local tResult

libDocumentationVerifyAll "dictionary/", pOutputDirectory

put the result into tResult

if the result is not empty then

throw "generation_failed - " & "libDocumentationClumpGenerateAll", "The following docs failed to build: " & return & tResult

exit to top

end if

end compileDictionaryIntoStacks

private function getIndexFileName pDirectory

if pDirectory is "dictionary/" then

return "dict.index"

else

return "glos.index"

end if

end getIndexFileName

private command libDocumentationVerifyAll pDocDirectory, pOutputDirectory

reportProgress "Verifying dictionary", 0, "Verifying dictionary"

local tIndexPath

local tIndexFileName

put getIndexFileName(pDocDirectory) into tIndexFileName

set the itemDelimiter to slash

put item 1 to -3 of pOutputDirectory & slash & tIndexFileName into tIndexPath

set the itemDelimiter to comma

local tIndex

put url ("binfile:" & tIndexPath) into tIndex

put arrayDecode(tIndex) into tIndex

local tDocsDirectory

set the itemDelimiter to slash

put item 1 to -3 of pOutputDirectory into tDocsDirectory

set the itemDelimiter to comma

local tResult

local tType, tTag

set the itemDelimiter to tab

local tTotal

put the number of lines of the keys of tIndex into tTotal

local tLineNumber

put 1 into tLineNumber

repeat for each key tLine in tIndex

put "dictionary/" into tType

put tIndex[tLine]["ID"] into tTag

local tData

try

put revDocumentationRetrieve(tType, tTag, tDocsDirectory) into tData

if tData is empty then

put "Failed to load dictionary entry: " & tTag && tType & return after tResult

end if

catch tError

put "Failed to load dictionary entry: " & tTag && tType & return after tResult

end try

if tLineNumber mod 10 = 0 then

reportProgress "Verifying dictionary", ((tLineNumber / tTotal) * 100), "Verified dictionary entry: " & tLine

end if

add 1 to tLineNumber

end repeat

reportProgress "Verifying dictionary", 100, "Dictionary verified"

return tResult

end libDocumentationVerifyAll

private command libDocumentationBuildGlossaryIndex pFileToDirectory, pOutputDirectory

local tStep

put "Creating glossary index" into tStep

reportProgress tStep, 0, tStep

local tIndexFileName

put getIndexFileName("glossary/") into tIndexFileName

local tIndexFile

set the itemDelimiter to slash

put item 1 to -3 of pOutputDirectory & slash & tIndexFileName into tIndexFile

local tIndex, tPath, tLine

local tArrIndex

repeat with tArrIndex = 1 to the number of elements of pFileToDirectory

if pFileToDirectory[tArrIndex]["type"] is "glossary" then

put pFileToDirectory[tArrIndex]["path"] into tPath

put indexGlossaryLine(tPath, tArrIndex) into tLine

put tLine & return after tIndex

end if

reportProgress tStep, ((tArrIndex / the number of elements of pFileToDirectory) * 100), "Indexed glossary file: " & item -1 of tPath

end repeat

set the itemDelimiter to comma

delete the last char of tIndex

local tResult

put tIndex into url ("file:" & tIndexFile)

put the result into tResult

if tResult is not empty then

errorShow "Failed to write to file: " & tIndexFile & " with error : " & tResult

exit libDocumentationBuildGlossaryIndex

end if

reportProgress tStep, 100, "Index creation finished"

end libDocumentationBuildGlossaryIndex

// HSC - tested - complies with current dictionary format

private command libDocumentationBuildDictionaryIndex pFileToDirectory, pOutputDirectory

local tStep

put "Creating dictionary index" into tStep

reportProgress tStep, 0, tStep

local tIndexFileName

put getIndexFileName("dictionary/") into tIndexFileName

local tIndexFile

set the itemDelimiter to slash

put item 1 to -3 of pOutputDirectory & slash & tIndexFileName into tIndexFile

local tIndex, tLine, tArrIndex, tPath

local tLineNumber

put 0 into tLineNumber

repeat with tArrIndex = 1 to the number of elements of pFileToDirectory

if pFileToDirectory[tArrIndex]["type"] is not "glossary" then

add 1 to tLineNumber

put pFileToDirectory[tArrIndex]["path"] into tPath

put indexLine(tPath, tArrIndex) into tLine

put tLine into tIndex[tLineNumber]

local tSynonyms

put expandSynonyms(tPath, tArrIndex) into tSynonyms

if tSynonyms is an array then

repeat for each key tKey in tSynonyms

add 1 to tLineNumber

put tSynonyms[tKey] into tIndex[tLineNumber]

end repeat

end if

end if

reportProgress tStep, ((tArrIndex / the number of elements of pFileToDirectory) * 100), "Indexed dictionary file: " & item -1 of tPath

end repeat

set the itemDelimiter to comma

local tResult

put arrayEncode(tIndex) into url ("binfile:" & tIndexFile)

put the result into tResult

if tResult is not empty then

errorShow "Failed to write to file: " & tIndexFile & " with error: " & tResult

exit libDocumentationBuildDictionaryIndex

end if

reportProgress tStep, 100, "Index creation finished"

end libDocumentationBuildDictionaryIndex

# This function does the following:

# 1. Opens the file pDocument and creates an xml tree of the contents.

# 2. Extract the "synonyms" node and processes it to obtain a list of the synonyms.

# 3. For each synonym, creates an index line linking to pDocument

# 4. Returns the list of index lines

private function expandSynonyms pDocument, pFilename

local tData

put url ("binfile:" & pDocument) into tData

if tData is empty then

errorShow "No data for file: " & pDocument

exit expandSynonyms

end if

local tTree

put revCreateXMLTree(tData, false, true, false) into tTree

local tRoot

put revXMLRootNode(tTree) into tRoot

if tTree is not a number then

errorShow "The document " & pDocument & " cannot be parsed by revXML"

exit expandSynonyms

end if

if tRoot is not "doc" then

errorShow "The document " & pDocument & " is not a valid dictionary entry because its root node is not <doc>"

exit expandSynonyms

end if

# Synonyms are stored as:

# <synonyms>

# <synonym>wd</synonym>

# <synonym>window</synonym>

# revXMLChildNames gives us a return-delimited list of each node containing a synonym.

local tNodes

put revXMLChildNames(tTree, "/doc/synonyms", return, "synonym", true) into tNodes

if tNodes is empty or item 1 of tNodes is "xmlerr" then

# No synonyms found, exit now...

return empty

end if

local tIndexLine

put indexLine(pDocument, pFilename) into tIndexLine

local tName

-- set the itemDelimiter to tab

-- put item 2 of tIndexLine into tName

-- set the itemDelimiter to comma

put tIndexLine["Keyword"] into tName

local tSynonym, tSynonyms, tContent

local tCount

put 0 into tCount

repeat for each line tNode in tNodes

add 1 to tCount

put revXMLNodeContents(tTree, "/doc/synonyms/" & tNode) into tContent

# For each one, copy the index line from the main doc, but replace the doc's name with the synonym.

put tIndexLine into tSynonym

--set the itemDelimiter to tab

# Replace the main name

# put tContent into item 2 of tSynonym

put tContent into tSynonym["Keyword"]

# Replace any references to the name in the syntax (hopefully this won't cause irregular syntax problems...)

--get item 4 of tSynonym

get tSynonym["Syntax"]

replace tName with tContent in it

--put it into item 4 of tSynonym

put it into tSynonym["Syntax"]

--set the itemDelimiter to comma

--put tSynonym & return after tSynonyms

put tSynonym into tSynonyms[tCount]

end repeat

--delete the last char of tSynonyms

revDeleteXMLTree tTree

return tSynonyms

end expandSynonyms

-- Given the path to an xml documentation entry (dictionary only),

-- returns the line of text in the dictionary index that corresponds

-- to the document.

// HSC - tested - complies with current dictionary format

private function indexLine pDoc, pIndex

local tFilename

set the itemDelimiter to slash

put item -1 of pDoc into tFilename

local tData

put url ("file:" & pDoc) into tData

local tArray

put pIndex into tArray["ID"]

local tTree

put revCreateXMLTree(tData, false, true, false) into tTree

if tTree is not a number then

breakpoint

end if

local tName, tCategory

put escapeEntities(revXMLNodeContents(tTree, "doc/name")) into tArray["Keyword"]

put revXMLNodeContents(tTree, "doc/type") into tArray["Type"]

if item 1 of tArray["Keyword"] is "xmlerr" then

errorShow "Could not extract name from the dictionary file : " & pDoc & " with error: " & tName

exit indexLine

end if

if item 1 of tArray["Type"] is "xmlerr" then

errorShow "Could not extract type from the glossary file : " & pDoc & " with error: " & tCategory

exit indexLine

end if

local tSyntax

set the itemDelimiter to comma

put extractNodeXML(tTree, "doc/syntax/example") into tSyntax

if item 1 of tSyntax is "xmlerr" then

put empty into tArray["Syntax"]

else

put auxFormatSyntax(tSyntax) into tArray["Syntax"]

end if

local tSynonymInfo, tSynonyms

put revXMLChildContents(tTree, "doc/synonyms", slash, comma, true, 1) into tSynonymInfo

repeat for each item tChild in tSynonymInfo

set the itemDelimiter to slash

put item 2 to -1 of tChild & comma after tSynonyms

set the itemDelimiter to comma

end repeat

if tSynonyms is not empty then

delete the last char of tSynonyms

end if

put tSynonyms into tArray["Synonyms"]

local tVersion

set the itemDelimiter to comma

put revXMLAttribute(tTree, "doc/history/introduced", "version") into tVersion

if item 1 of tVersion is "xmlerr" then

put empty into tArray["Version"]

else

put tVersion into tArray["Version"]

end if

put revDocumentationVersionDate(tArray["Version"]) into tArray["Date"]

put empty into tArray["Notes"]

local tLibrary

put revXMLNodeContents(tTree, "doc/library") into tLibrary

if item 1 of tLibrary is "xmlerr" then

put empty into tArray["Library"]

else

put tLibrary into tArray["Library"]

end if

local tObjects

put revXMLChildNames(tTree,"doc/objects",return,,false) into tObjects

repeat for each word tObject in "Button Field Graphic Scrollbar Image Player Card Stack Group"

if lower (tObject) is among the lines of tObjects or tObjects is "any object" then

put merge("<img src=[[quote]]201233[[quote]] />") into tArray[tObject]

else

put empty into tArray[tObject]

end if

end repeat

local tClass, tLine

put revXMLChildNames(tTree,"doc/classes",return,,false) into tClass

put empty into tArray["Platforms"]

if "desktop" is among the lines of tClass then

put "Desktop, " after tArray["Platforms"]

end if

if "server" is among the lines of tClass then

put "Server, " after tArray["Platforms"]

end if

if "web" is among the lines of tClass then

put "Web, " after tArray["Platforms"]

end if

if "mobile" is among the lines of tClass then

put "Mobile, " after tArray["Platforms"]

end if

if tArray["Platforms"] is not empty then

put item 1 to -2 of tArray["Platforms"] into tArray["Platforms"]

else

//put "" into tArray["Platforms"]

put "Desktop, Server, Web, Mobile" into tArray["Platforms"]

end if

local tSecurity

put revXMLChildNames(tTree,"doc/security",return,,false) into tSecurity

put empty into tArray["Security"]

local tCapitalEntry

repeat for each line tLine in tSecurity

put tLine into tCapitalEntry

put toUpper (character 1 of tCapitalEntry) into character 1 of tCapitalEntry

put tArray["Security"] & tCapitalEntry & comma & space into tArray["Security"]

end repeat

if tArray["Security"] is not empty then

put item 1 to -2 of tArray["Security"] into tArray["Security"]

else

put "None required" into tArray["Security"]

end if

// We are not supporting Products anymore

put "" into tArray["Products"]

local tPlatforms

put extractPlatformInformation(tTree) into tPlatforms

//HSC-ND put tPlatforms into tArray["Platforms"]

put tPlatforms into tArray["Operating Systems"]

revDeleteXMLTree tTree

return tArray

end indexLine

function indexGlossaryLine pDoc, pIndex

local tFilename

set the itemDelimiter to slash

put item -1 of pDoc into tFilename

local tData

put url ("file:" & pDoc) into tData

local tTree

put revCreateXMLTree(tData, false, true, false) into tTree

if tTree is not a number then

errorShow "Could not parse the glossary file: " & pDoc & " with error: " & tTree

exit indexGlossaryLine

end if

local tName, tCategory

put revXMLNodeContents(tTree, "doc/term") into tName

put revXMLNodeContents(tTree, "doc/categories/category") into tCategory

if item 1 of tName is "xmlerr" then

errorShow "Could not extract name from the glossary file : " & pDoc & " with error: " & tName

exit indexGlossaryLine

end if

if item 1 of tCategory is "xmlerr" then

errorShow "Could not extract category from the glossary file : " & pDoc & " with error: " & tCategory

exit indexGlossaryLine

end if

local tLine

put pIndex & tab & tName & tab & tCategory into tLine

return tLine

end indexGlossaryLine

private function extractPlatformInformation pTree, pMetadata

local tPlatforms

# Information about the 4 desktop platforms is already contained in each document,

# first extract this.

//if revXMLAttribute(pTree, "doc/platforms", "mac/") then

//put "MacOS," after tPlatforms

//end if

local tChildNames

put revXMLChildNames(pTree,"doc/platforms",return,,false) into tChildNames

if "mac" is among the lines of tChildNames then

put "Mac OS X," after tPlatforms

end if

if "windows" is among the lines of tChildNames then

put "Windows," after tPlatforms

end if

if "linux" is among the lines of tChildNames then

put "Linux," after tPlatforms

end if

if "ios" is among the lines of tChildNames then

put "iOS," after tPlatforms

end if

if "android" is among the lines of tChildNames then

put "Android," after tPlatforms

end if

delete the last char of tPlatforms

--delete the last char of tPlatforms

return tPlatforms

end extractPlatformInformation

private function extractNodeXML pTree, pName

local tXML

put revXMLText(pTree, pName, false) into tXML

if item 1 of tXML is "xmlerr" then

return tXML

end if

# Chop off the "<pName>" at the start as we don't want this and also the "</pName>" at the end

local tName

set the itemDelimiter to slash

put item -1 of pName into tName

set the itemDelimiter to comma

delete char 1 to (the length of tName + 2) of tXML

delete char -(the length of tName + 3) to -1 of tXML

return tXML

end extractNodeXML

private function auxFormatSyntax pSyntax

local tSyntax, tOffset

local tReduced = "false"

put pSyntax into tSyntax

if the number of lines of tSyntax > 1 then

put true into tReduced

put line 1 of tSyntax into tSyntax

end if

if the last char of tSyntax is return then delete the last char of tSyntax

put offset("</p>",tSyntax) into tOffset

if tOffset <> 0 then add 4 to tOffset

if (tOffset <> 0) and (tOffset < the length of tSyntax) then

put char 1 to tOffset - 5 of tSyntax & "</p>" into tSyntax

put true into tReduced

end if

replace "<p>" with empty in tSyntax

replace "</p>" with empty in tSyntax

replace tab with space in tSyntax

if tReduced then put " ..." after tSyntax

-- Remove all style tags. This is a workaround for the tabstops bug

-- remove this line to allow the original style information for syntax

-- to reappear in the dictionary.

put replaceText(tSyntax, "(<[/a-zA-Z0-9]+>)", "") into tSyntax

return tSyntax

end auxFormatSyntax

private function escapeEntities pText

replace "&" with "&amp;" in pText

replace quote with "&quot;" in pText

replace "<" with "&lt;" in pText

replace ">" with "&gt;" in pText

return pText

end escapeEntities

// HSC - tested - complies with current dictionary format

private command libDocumentationClumpCreate pNumber, pDir

local tClumpName

---------

put kClumpNamePrefix & pNumber into tClumpName

local tResult

create invisible stack tClumpName

save it as pDir & slash & tClumpName & ".rev"

put the result into tResult

if tResult is not empty then

errorShow "Failed to save file to disk at location: " & pDir & slash & tClumpName & ".rev" & " with result: " & tResult

exit libDocumentationClumpCreate

end if

return tClumpName

end libDocumentationClumpCreate