Manually fix typos to avoid bot-trust farming

akarnokd · akarnokd · commit 49bc6504d30a · 2024-08-13T16:25:58.000+02:00
diff --git a/docs/Backpressure-(2.0).md b/docs/Backpressure-(2.0).md
@@ -172,7 +172,7 @@ If some of the values can be safely ignored, one can use the sampling (with time
     }
 ```
 
-Note hovewer that these operators only reduce the rate of value reception by the downstream and thus they may still lead to `MissingBackpressureException`.
+Note however that these operators only reduce the rate of value reception by the downstream and thus they may still lead to `MissingBackpressureException`.
 
 ## onBackpressureBuffer()
 
@@ -229,7 +229,7 @@ Note that the last two strategies cause discontinuity in the stream as they drop
 
 ## onBackpressureDrop()
 
-Whenever the downstream is not ready to receive values, this operator will drop that elemenet from the sequence. One can think of it as a 0 capacity `onBackpressureBuffer` with strategy `ON_OVERFLOW_DROP_LATEST`.
+Whenever the downstream is not ready to receive values, this operator will drop that element from the sequence. One can think of it as a 0 capacity `onBackpressureBuffer` with strategy `ON_OVERFLOW_DROP_LATEST`.
 
 This operator is useful when one can safely ignore values from a source (such as mouse moves or current GPS location signals) as there will be more up-to-date values later on.
 
diff --git a/docs/Filtering-Observables.md b/docs/Filtering-Observables.md
@@ -259,7 +259,7 @@ firstOrError.subscribe(
 
 **ReactiveX documentation:** [http://reactivex.io/documentation/operators/ignoreelements.html](http://reactivex.io/documentation/operators/ignoreelements.html)
 
-Ignores the single item emitted by a `Single` or `Maybe` source, and returns a `Completable` that signals only the error or completion event from the the source.
+Ignores the single item emitted by a `Single` or `Maybe` source, and returns a `Completable` that signals only the error or completion event from the source.
 
 ### ignoreElement example
 
diff --git a/docs/What's-different-in-2.0.md b/docs/What's-different-in-2.0.md
@@ -450,12 +450,12 @@ Before 2.0.7, the operator `strict()` had to be applied in order to achieve the
 
 As one of the primary goals of RxJava 2, the design focuses on performance and in order enable it, RxJava 2.0.7 adds a custom `io.reactivex.FlowableSubscriber` interface (extends `org.reactivestreams.Subscriber`) but adds no new methods to it. The new interface is **constrained to RxJava 2** and represents a consumer to `Flowable` that is able to work in a mode that relaxes the Reactive-Streams version 1.0.0 specification in rules §1.3, §2.3, §2.12 and §3.9:
 
-  - §1.3 relaxation: `onSubscribe` may run concurrently with `onNext` in case the `FlowableSubscriber` calls `request()` from inside `onSubscribe` and it is the resposibility of `FlowableSubscriber` to ensure thread-safety between the remaining instructions in `onSubscribe` and `onNext`.
+  - §1.3 relaxation: `onSubscribe` may run concurrently with `onNext` in case the `FlowableSubscriber` calls `request()` from inside `onSubscribe` and it is the responsibility of `FlowableSubscriber` to ensure thread-safety between the remaining instructions in `onSubscribe` and `onNext`.
   - §2.3 relaxation: calling `Subscription.cancel` and `Subscription.request` from `FlowableSubscriber.onComplete()` or `FlowableSubscriber.onError()` is considered a no-operation.
   - §2.12 relaxation: if the same `FlowableSubscriber` instance is subscribed to multiple sources, it must ensure its `onXXX` methods remain thread safe.
   - §3.9 relaxation: issuing a non-positive `request()` will not stop the current stream but signal an error via `RxJavaPlugins.onError`.
 
-From a user's perspective, if one was using the the `subscribe` methods other than `Flowable.subscribe(Subscriber<? super T>)`, there is no need to do anything regarding this change and there is no extra penalty for it.
+From a user's perspective, if one was using the `subscribe` methods other than `Flowable.subscribe(Subscriber<? super T>)`, there is no need to do anything regarding this change and there is no extra penalty for it.
 
 If one was using `Flowable.subscribe(Subscriber<? super T>)` with the built-in RxJava `Subscriber` implementations such as `DisposableSubscriber`, `TestSubscriber` and `ResourceSubscriber`, there is a small runtime overhead (one `instanceof` check) associated when the code is not recompiled against 2.0.7.
 
diff --git a/docs/Writing-operators-for-2.0.md b/docs/Writing-operators-for-2.0.md
@@ -565,7 +565,7 @@ Version 2.0.7 introduced a new interface, `FlowableSubscriber` that extends `Sub
 
 The rule relaxations are as follows:
 
-- §1.3 relaxation: `onSubscribe` may run concurrently with onNext in case the `FlowableSubscriber` calls `request()` from inside `onSubscribe` and it is the resposibility of `FlowableSubscriber` to ensure thread-safety between the remaining instructions in `onSubscribe` and `onNext`.
+- §1.3 relaxation: `onSubscribe` may run concurrently with onNext in case the `FlowableSubscriber` calls `request()` from inside `onSubscribe` and it is the responsibility of `FlowableSubscriber` to ensure thread-safety between the remaining instructions in `onSubscribe` and `onNext`.
 - §2.3 relaxation: calling `Subscription.cancel` and `Subscription.request` from `FlowableSubscriber.onComplete()` or `FlowableSubscriber.onError()` is considered a no-operation.
 - §2.12 relaxation: if the same `FlowableSubscriber` instance is subscribed to multiple sources, it must ensure its `onXXX` methods remain thread safe.
 - §3.9 relaxation: issuing a non-positive `request()` will not stop the current stream but signal an error via `RxJavaPlugins.onError`.
diff --git a/src/main/java/io/reactivex/rxjava3/core/Scheduler.java b/src/main/java/io/reactivex/rxjava3/core/Scheduler.java
@@ -350,7 +350,7 @@ public Disposable schedulePeriodicallyDirect(@NonNull Runnable run, long initial
      * });
      * </pre>
      *
-     * Slowing down the rate to no more than than 1 a second. This suffers from
+     * Slowing down the rate to no more than 1 a second. This suffers from
      * the same problem as the one above I could find an {@link Flowable}
      * operator that limits the rate without dropping the values (aka leaky
      * bucket algorithm).
diff --git a/src/main/java/io/reactivex/rxjava3/internal/schedulers/SchedulerWhen.java b/src/main/java/io/reactivex/rxjava3/internal/schedulers/SchedulerWhen.java
@@ -80,7 +80,7 @@
  * }
  * </pre>
  *
- * Slowing down the rate to no more than than 1 a second. This suffers from the
+ * Slowing down the rate to no more than 1 a second. This suffers from the
  * same problem as the one above I could find an {@link Observable} operator
  * that limits the rate without dropping the values (aka leaky bucket
  * algorithm).

Original file line number	Diff line number	Diff line change
`@@ -350,7 +350,7 @@ public Disposable schedulePeriodicallyDirect(@NonNull Runnable run, long initial`
`350`	`350`	`* });`
`351`	`351`	`* </pre>`
`352`	`352`	`*`
`353`		`- * Slowing down the rate to no more than than 1 a second. This suffers from`
	`353`	`+ * Slowing down the rate to no more than 1 a second. This suffers from`
`354`	`354`	`* the same problem as the one above I could find an {@link Flowable}`
`355`	`355`	`* operator that limits the rate without dropping the values (aka leaky`
`356`	`356`	`* bucket algorithm).`
Original file line number	Diff line number	Diff line change
`@@ -80,7 +80,7 @@`
`80`	`80`	`* }`
`81`	`81`	`* </pre>`
`82`	`82`	`*`
`83`		`- * Slowing down the rate to no more than than 1 a second. This suffers from the`
	`83`	`+ * Slowing down the rate to no more than 1 a second. This suffers from the`
`84`	`84`	`* same problem as the one above I could find an {@link Observable} operator`
`85`	`85`	`* that limits the rate without dropping the values (aka leaky bucket`
`86`	`86`	`* algorithm).`