# Makefile for Vim on Unix and Unix-like systems vim:ts=8:sw=8:tw=78

#

# This Makefile is loosely based on the GNU Makefile conventions found in

# standards.info.

#

# Compiling Vim, summary:

#

# 3. make

# 5. make install

#

# Compiling Vim, details:

#

# Edit this file for adjusting to your system. You should not need to edit any

# other file for machine specific things!

# The name of this file MUST be Makefile (note the uppercase 'M').

#

# 1. Edit this Makefile {{{1

# The defaults for Vim should work on most machines, but you may want to

# uncomment some lines or make other changes below to tune it to your

# system, compiler or preferences. Uncommenting means that the '#' in

# the first column of a line is removed.

# - If you want a version of Vim that is small and starts up quickly,

# you might want to disable the GUI, X11, Perl, Python and Tcl.

# - Uncomment the line with --disable-gui if you have Motif and/or GTK

# but don't want to make gvim (the GUI version of Vim with nice

# menus and scrollbars, but makes Vim bigger and startup slower).

# - Uncomment --disable-darwin if on Mac OS X but you want to compile a

# Unix version.

# - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but

# want to disable using X11 libraries. This speeds up starting Vim,

# but the window title will not be set and the X11 selection can not

# be used.

# - Uncomment the line "CONF_OPT_XSMP = --disable-xsmp" if you have the

# X11 Session Management Protocol (XSMP) library (libSM) but do not

# want to use it.

# This can speedup Vim startup but Vim loses the ability to catch the

# user logging out from session-managers like GNOME and work

# could be lost.

# - Uncomment one or more of these lines to include an interface;

# each makes Vim quite a bit bigger:

# --enable-luainterp for Lua interpreter

# --enable-mzschemeinterp for MzScheme interpreter

# --enable-perlinterp for Perl interpreter

# --enable-python3interp for Python3 interpreter

# --enable-pythoninterp for Python interpreter

# --enable-rubyinterp for Ruby interpreter

# --enable-tclinterp for Tcl interpreter

# --enable-cscope for Cscope interface

# - Uncomment one of the lines with --with-features= to enable a set of

# features (but not the interfaces just mentioned).

# - Uncomment the line with --disable-acl to disable ACL support even

# though your system supports it.

# - Uncomment the line with --disable-gpm to disable gpm support

# even though you have gpm libraries and includes.

# - Uncomment the line with --disable-sysmouse to disable sysmouse

# support even though you have /dev/sysmouse and includes.

# - Uncomment one of the lines with CFLAGS and/or CC if you have

# something very special or want to tune the optimizer.

# - Search for the name of your system to see if it needs anything

# special.

# - A few versions of make use '.include "file"' instead of 'include

# file'. Adjust the include line below if yours does.

#

# 2. Edit feature.h {{{1

# Only if you do not agree with the default compile features, e.g.:

# - you want Vim to be as vi compatible as it can be

# - you want to use Emacs tags files

# - you want right-to-left editing (Hebrew)

# - you want 'langmap' support (Greek)

# - you want to remove features to make Vim smaller

#

# 3. "make" {{{1

# Will first run ./configure with the options in this file. Then it will

# start make again on this Makefile to do the compiling. You can also do

# this in two steps with:

# make config

# make

# The configuration phase creates/overwrites auto/config.h and

# auto/config.mk.

# The configure script is created with "make autoconf". It can detect

# different features of your system and act accordingly. However, it is

# not correct for all systems. Check this:

# - If you have X windows, but configure could not find it or reported

# another include/library directory then you wanted to use, you have

# to set CONF_OPT_X below. You might also check the installation of

# xmkmf.

# - If you have --enable-gui=motif and have Motif on your system, but

# configure reports "checking for location of gui... <not found>", you

# have to set GUI_INC_LOC and GUI_LIB_LOC below.

# If you changed something, do this to run configure again:

# make reconfig

#

# - If you do not trust the automatic configuration code, then inspect

# auto/config.h and auto/config.mk, before starting the actual build

# phase. If possible edit this Makefile, rather than auto/config.mk --

# especially look at the definition of VIMLOC below. Note that the

# configure phase overwrites auto/config.mk and auto/config.h again.

# - If you get error messages, find out what is wrong and try to correct

# it in this Makefile. You may need to do "make reconfig" when you

# change anything that configure uses (e.g. switching from an old C

# compiler to an ANSI C compiler). Only when auto/configure does

# something wrong you may need to change one of the other files. If

# you find a clean way to fix the problem, consider sending a note to

# the author of autoconf (bug-gnu-utils@prep.ai.mit.edu) or Vim

# (vim-dev@vim.org). Don't bother to do that when you made a hack

# solution for a non-standard system.

#

# 4. "make test" {{{1

# This is optional. This will run Vim scripts on a number of test

# files, and compare the produced output with the expected output.

# If all is well, you will get the "ALL DONE" message in the end. If a

# test fails you get "TEST FAILURE". See below (search for "/^test").

#

# 5. "make install" {{{1

# If the new Vim seems to be working OK you can install it and the

# documentation in the appropriate location. The default is

# "/usr/local". Change "prefix" below to change the location.

# "auto/pathdef.c" will be compiled again after changing this to make

# the executable know where the help files are located.

# Note that any existing executable is removed or overwritten. If you

# want to keep it you will have to make a backup copy first.

# The runtime files are in a different directory for each version. You

# might want to delete an older version.

# If you don't want to install everything, there are other targets:

# make installvim only installs Vim, not the tools

# make installvimbin only installs the Vim executable

# make installruntime installs most of the runtime files

# make installrtbase only installs the Vim help and

# runtime files

# make installlinks only installs the Vim binary links

# make installmanlinks only installs the Vim manpage links

# make installmacros only installs the Vim macros

# make installpack only installs the packages

# make installtutorbin only installs the Vim tutor program

# make installtutor only installs the Vim tutor files

# make installspell only installs the spell files

# make installtools only installs xxd

# If you install Vim, not to install for real but to prepare a package

# or RPM, set DESTDIR to the root of the tree.

#

# 6. Use Vim until a new version comes out. {{{1

#

# 7. "make uninstall_runtime" {{{1

# Will remove the runtime files for the current version. This is safe

# to use while another version is being used, only version-specific

# files will be deleted.

# To remove the runtime files of another version:

# make uninstall_runtime VIMRTDIR=/vim54

# If you want to delete all installed files, use:

# make uninstall

# Note that this will delete files that have the same name for any

# version, thus you might need to do a "make install" soon after this.

# Be careful not to remove a version of Vim that is still being used!

# To find out which files and directories will be deleted, use:

# make -n uninstall

# }}}

#

### This Makefile has been successfully tested on many systems. {{{

### Only the ones that require special options are mentioned here.

### Check the (*) column for remarks, listed below.

### Later code changes may cause small problems, otherwise Vim is supposed to

### compile and run without problems.

#system: configurations: version (*) tested by:

#------------- ------------------------ ------- - ----------

#AIX 3.2.5 cc (not gcc) - 4.5 (M) Will Fiveash

#AIX 4 cc +X11 -GUI 3.27 (4) Axel Kielhorn

#AIX 4.1.4 cc +X11 +GUI 4.5 (5) Nico Bakker

#AIX 4.2.1 cc 5.2k (C) Will Fiveash

#AIX 4.3.3.12 xic 3.6.6 5.6 (5) David R. Favor

#A/UX 3.1.1 gcc +X11 4.0 (6) Jim Jagielski

#BSDI 2.1 (x86) shlicc2 gcc-2.6.3 -X11 X11R6 4.5 (1) Jos Backus

#BSD/OS 3.0 (x86) gcc gcc-2.7.2.1 -X11 X11R6 4.6c (1) Jos Backus

#CX/UX 6.2 cc +X11 +GUI_Mofif 5.4 (V) Kipp E. Howard

#DG/UX 5.4* gcc 2.5.8 GUI 5.0e (H) Jonas Schlein

#DG/UX 5.4R4.20 gcc 2.7.2 GUI 5.0s (H) Rocky Olive

#HP-UX (most) c89 cc 5.1 (2) Bram Moolenaar

#HP-UX_9.04 cc +X11 +Motif 5.0 (2) Carton Lao

#Linux 2.0 gcc-2.7.2 Infomagic Motif 4.3 (3) Ronald Rietman

#NEC UP4800 UNIX_SV 4.2MP cc +X11R6 Motif 4.6b (Q) Lennart Schultz

#NetBSD 1.0A gcc-2.4.5 -X11 -GUI 3.21 (X) Juergen Weigert

#QNX 4.2 wcc386-10.6 -X11 4.2 (D) G.F. Desrochers

#QNX 4.23 Watcom -X11 4.2 (F) John Oleynick

#SCO Unix v3.2.5 cc +X11 Motif 3.27 (C) M. Kuperblum

#SCO Open Server 5 gcc 2.7.2.3 +X11 +GUI Motif 5.3 (A) Glauber Ribeiro

#SINIX-N 5.43 RM400 R4000 cc +X11 +GUI 5.0l (I) Martin Furter

#SINIX-Z 5.42 i386 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn

#SINIX-Y 5.43 RM600 R4000 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn

#Reliant/SINIX 5.44 cc +X11 +GUI 5.5a (I) B. Pruemmer

#SNI Targon31 TOS 4.1.11 gcc-2.4.5 +X11 -GUI 4.6c (B) Paul Slootman

#Solaris 2.4 (Sparc) cc +X11 +GUI 3.29 (9) Glauber

#Solaris 2.4/2.5 clcc +X11 -GUI openwin 3.20 (7) Robert Colon

#Solaris 2.5 (sun4m) cc (SC4.0) +X11R6 +GUI (CDE) 4.6b (E) Andrew Large

#Solaris 2.5 gcc 2.5.6 +X11 Motif 5.0m (R) Ant. Colombo

#Solaris 2.6 gcc 2.8.1 ncurses 5.3 (G) Larry W. Virden

#Solaris with -lthread 5.5 (W) K. Nagano

#Solaris gcc (b) Riccardo

#SunOS 4.1.x +X11 -GUI 5.1b (J) Bram Moolenaar

#SUPER-UX 6.2 (NEC SX-4) cc +X11R6 Motif 4.6b (P) Lennart Schultz

#Tandem/NSK (c) Matthew Woehlke

#Unisys 6035 cc +X11 Motif 5.3 (8) Glauber Ribeiro

#ESIX V4.2 cc +X11 6.0 (a) Reinhard Wobst

# }}}

# (*) Remarks: {{{

#

# (1) Uncomment line below for shlicc2

# (2) HPUX with compile problems or wrong digraphs, uncomment line below

# (3) Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below.

# And add "-lXpm" to MOTIF_LIBS2.

# (4) For cc the optimizer must be disabled (use CFLAGS= after running

# configure) (symptom: ":set termcap" output looks weird).

# (5) Compiler may need extra argument, see below.

# (6) See below for a few lines to uncomment

# (7) See below for lines which enable the use of clcc

# (8) Needs some EXTRA_LIBS, search for Unisys below

# (9) Needs an extra compiler flag to compile gui_at_sb.c, see below.

# (A) May need EXTRA_LIBS, see below

# (B) Can't compile GUI because there is no waitpid()... Disable GUI below.

# (C) Force the use of curses instead of termcap, see below.

# (D) Uncomment lines below for QNX

# (E) You might want to use termlib instead of termcap, see below.

# (F) See below for instructions.

# (G) Using ncurses version 4.2 has reported to cause a crash. Use the

# Sun curses library instead.

# (H) See line for EXTRA_LIBS below.

# (I) SINIX-N 5.42 and 5.43 need some EXTRA_LIBS. Also for Reliant-Unix.

# (J) If you get undefined symbols, see below for a solution.

# (K) See lines to uncomment below for machines with 64 bit pointers.

# (L) For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk

# (M) gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two

# characters instead of one).

# (N) SCO with decmouse.

# (O) LynxOS needs EXTRA_LIBS, see below.

# (P) For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment.

# (Q) For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment.

# (R) For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below.

# (U) Must uncomment CONF_OPT_PYTHON option below to disable Python

# detection, since the configure script runs into an error when it

# detects Python (probably because of the bash shell).

# (V) See lines to uncomment below.

# (X) Need to use the .include "auto/config.mk" line below

# (Y) See line with c89 below

# (Z) See lines with cc or c89 below

# (a) See line with EXTRA_LIBS below.

# (b) When using gcc with the Solaris linker, make sure you don't use GNU

# strip, otherwise the binary may not run: "Cannot find ELF".

# (c) Add -lfloss to EXTRA_LIBS, see below.

# (x) When you get warnings for precompiled header files, run

# "sudo fixPrecomps". Also see CONF_OPT_DARWIN below.

# }}}

#DO NOT CHANGE the next line, we need it for configure to find the compiler

#instead of using the default from the "make" program.

#Use a line further down to change the value for CC.

CC=

# Change and use these defines if configure cannot find your Motif stuff.

# Unfortunately there is no "standard" location for Motif. {{{

# These defines can contain a single directory (recommended) or a list of

# directories (for when you are working with several systems). The LAST

# directory that exists is used.

# When changed, run "make reconfig" next!

#GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2

#GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2

### Use these two lines for Infomagic Motif (3)

#GUI_INC_LOC = -I/usr/X11R6/include

#GUI_LIB_LOC = -L/usr/X11R6/lib

# }}}

# Defaults used when auto/config.mk does not exist.

srcdir = .

VIMNAME = vim

EXNAME = ex

VIEWNAME = view

######################## auto/config.mk ######################## {{{1

# At this position auto/config.mk is included. When starting from the

# toplevel Makefile it is almost empty. After running auto/configure it

# contains settings that have been discovered for your system. Settings below

# this include override settings in auto/config.mk!

# Note: If make fails because auto/config.mk does not exist (it is not

# included in the repository), do:

# cp config.mk.dist auto/config.mk

# (X) How to include auto/config.mk depends on the version of "make" you have,

# if the current choice doesn't work, try the other one.

include auto/config.mk

#.include "auto/config.mk"

CClink = $(CC)

#}}}

# Include the configuration choices first, so we can override everything

# below. As shipped, this file contains a target that causes to run

# configure. Once configure was run, this file contains a list of

# make variables with predefined values instead. Thus any second invocation

# of make, will build Vim.

# CONFIGURE - configure arguments {{{1

# You can give a lot of options to configure.

# Change this to your desire and do 'make config' afterwards

# examples you can uncomment:

#CONF_ARGS1 = --exec-prefix=/usr

#CONF_ARGS2 = --with-vim-name=vim8 --with-ex-name=ex8 --with-view-name=view8

#CONF_ARGS3 = --with-global-runtime=/etc/vim,/usr/share/vim

#CONF_ARGS4 = --with-local-dir=/usr/share

#CONF_ARGS5 = --without-local-dir

# Use this one if you distribute a modified version of Vim.

#CONF_ARGS6 = --with-modified-by="John Doe"

# GUI - For creating Vim with GUI (gvim) (B)

# Uncomment this line when you don't want to get the GUI version, although you

# have GTK and/or Motif. Also use --without-x if you don't want X11

# at all.

#CONF_OPT_GUI = --disable-gui

# Uncomment one of these lines if you have that GUI but don't want to use it.

# The automatic check will use another one that can be found.

# Gnome is disabled by default, because it may cause trouble.

#

# When both GTK+ 2 and GTK+ 3 are possible then GTK+ 2 will be selected.

# To use GTK+ 3 instead use --enable-gui=gtk3 (see below).

#CONF_OPT_GUI = --disable-gtk2-check

#CONF_OPT_GUI = --enable-gnome-check

#CONF_OPT_GUI = --disable-gtk3-check

#CONF_OPT_GUI = --disable-motif-check

# Uncomment one of these lines to select a specific GUI to use.

# When using "yes" or nothing, configure will use the first one found: GTK+,

# or Motif.

#

# GTK versions that are known not to work 100% are rejected.

# Use "--disable-gtktest" to accept them anyway.

# For GTK 1 use Vim 7.2.

#

# GNOME means GTK with Gnome support. If using GTK and --enable-gnome-check

# is used then GNOME will automatically be used if it is found. If you have

# GNOME, but do not want to use it (e.g., want a GTK-only version), then use

# --enable-gui=gtk or leave out --enable-gnome-check.

#

# GNOME makes sense only for GTK+ 2. Avoid use of --enable-gnome-check with

# GTK+ 3 build, as the functionality of GNOME is already incorporated into

# GTK+ 3.

#

# If the selected GUI isn't found, the GUI is disabled automatically

#CONF_OPT_GUI = --enable-gui=gtk2

#CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest

#CONF_OPT_GUI = --enable-gui=gnome2

#CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest

#CONF_OPT_GUI = --enable-gui=gtk3

#CONF_OPT_GUI = --enable-gui=gtk3 --disable-gtktest

#CONF_OPT_GUI = --enable-gui=motif

#CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared"

# Uncomment this line to run an individual test with gvim.

#GUI_TESTARG = GUI_FLAG=-g

# DARWIN - detecting Mac OS X

# Uncomment this line when you want to compile a Unix version of Vim on

# Darwin. None of the Mac specific options or files will be used.

#CONF_OPT_DARWIN = --disable-darwin

# Select the architecture supported. Default is to build for the current

# platform. Use "both" for a universal binary. That probably doesn't work

# when including Perl, Python, etc.

# NOTE: ppc probably doesn't work anymore,

#CONF_OPT_DARWIN = --with-mac-arch=intel

#CONF_OPT_DARWIN = --with-mac-arch=ppc

#CONF_OPT_DARWIN = --with-mac-arch=both

# Uncomment the next line to fail if one of the requested language interfaces

# cannot be configured. Without this Vim will be build anyway, without

# the failing interfaces.

#CONF_OPT_FAIL = --enable-fail-if-missing

# LUA

# Uncomment one of these when you want to include the Lua interface.

# First one is for static linking, second one for dynamic loading.

# Debian package is "lua5.3" and "liblua5.3-dev" or "lua5.4" and

# "liblua5.4-dev".

# Use --with-luajit if you want to use LuaJIT instead of Lua.

# Set PATH environment variable to find lua or luajit executable.

# This requires at least "normal" features, "tiny" doesn't work.

#CONF_OPT_LUA = --enable-luainterp

#CONF_OPT_LUA = --enable-luainterp=dynamic

#CONF_OPT_LUA = --enable-luainterp --with-luajit

#CONF_OPT_LUA = --enable-luainterp=dynamic --with-luajit

# Lua installation dir (when not set uses $LUA_PREFIX or defaults to /usr)

#CONF_OPT_LUA_PREFIX = --with-lua-prefix=/usr/local

# MZSCHEME

# Uncomment this when you want to include the MzScheme interface.

# You may have to build racket from source to make this work. Version 7.9 has

# been reported to work, version 8.0 probably doesn't work, version 8.5 has

# been reported to work.

# NOTE: does not work well together with valgrind.

#CONF_OPT_MZSCHEME = --enable-mzschemeinterp

# PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works

#CONF_OPT_PLTHOME = --with-plthome=/usr/local

#CONF_OPT_PLTHOME = --with-plthome=/usr/local/plt

#CONF_OPT_PLTHOME = --with-plthome=/usr/local/drscheme

#CONF_OPT_PLTHOME = --with-plthome=/home/me/mz

# PERL

# Uncomment one of these when you want to include the Perl interface.

# First one is for static linking, second one for dynamic loading.

# Debian package is "libperl-dev"

# The Perl option sometimes causes problems, because it adds extra flags

# to the command line. If you see strange flags during compilation, check in

# auto/config.mk where they come from. If it's PERL_CFLAGS, try commenting

# the next line.

# When you get an error for a missing "perl.exp" file, try creating an empty

# one: "touch perl.exp".

# This requires at least "normal" features, "tiny" doesn't work.

#CONF_OPT_PERL = --enable-perlinterp

#CONF_OPT_PERL = --enable-perlinterp=dynamic

# PYTHON

# Uncomment lines here when you want to include the Python interface.

# Debian package is "libpython3-dev".

# This requires at least "normal" features, "tiny" doesn't work.

# Python 3 is preferred, Python 2 (often referred to as "Python") has been

# deprecated for a long time.

# NOTE: This may cause threading to be enabled, which has side effects (such

# as using different libraries and debugging becomes more difficult).

# For Python3 support make a symbolic link in /usr/local/bin:

# ln -s python3 python3.1

# If both python2.x and python3.x are enabled then the linking will be via

# dlopen(), dlsym(), dlclose(), i.e. pythonX.Y.so must be available

# However, this may still cause problems, such as "import termios" failing.

# Build two separate versions of Vim in that case.

#CONF_OPT_PYTHON = --enable-pythoninterp

#CONF_OPT_PYTHON = --enable-pythoninterp --with-python-command=python2.7

#CONF_OPT_PYTHON = --enable-pythoninterp=dynamic

#CONF_OPT_PYTHON3 = --enable-python3interp

#CONF_OPT_PYTHON3 = --enable-python3interp --with-python3-command=python3.6

#CONF_OPT_PYTHON3 = --enable-python3interp=dynamic

# RUBY

# Uncomment this when you want to include the Ruby interface.

# First one for static linking, second one for loading when used.

# Debian package is "ruby-dev".

# This requires at least "normal" features, "tiny" doesn't work.

#CONF_OPT_RUBY = --enable-rubyinterp

#CONF_OPT_RUBY = --enable-rubyinterp=dynamic

#CONF_OPT_RUBY = --enable-rubyinterp --with-ruby-command=ruby1.9.1

# TCL

# Uncomment this when you want to include the Tcl interface.

# First one is for static linking, second one for dynamic loading.

# Debian package is "tcl-dev".

# This requires at least "normal" features, "tiny" doesn't work.

#CONF_OPT_TCL = --enable-tclinterp

#CONF_OPT_TCL = --enable-tclinterp=dynamic

#CONF_OPT_TCL = --enable-tclinterp --with-tclsh=tclsh8.4

# CSCOPE

# Uncomment this when you want to include the Cscope interface.

#CONF_OPT_CSCOPE = --enable-cscope

# NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome.

# Motif version must have XPM libraries (see |netbeans-xpm|).

# Uncomment this when you do not want the netbeans interface.

#CONF_OPT_NETBEANS = --disable-netbeans

# CHANNEL - inter process communication. Same conditions as NetBeans.

# Uncomment this when you do not want inter process communication.

#CONF_OPT_CHANNEL = --disable-channel

# TERMINAL - Terminal emulator support, :terminal command. Requires the

# channel feature. The default is enable for when using "huge" features.

# Uncomment the first line when you want terminal emulator support for

# not-huge builds. Uncomment the second line when you don't want terminal

# emulator support in the huge build.

#CONF_OPT_TERMINAL = --enable-terminal

#CONF_OPT_TERMINAL = --disable-terminal

# MULTIBYTE - To edit multi-byte characters.

# This is now always enabled.

# When building with "huge" features, right-left and Arabic

# features are enabled. Use this to disable them.

#CONF_OPT_MULTIBYTE = --disable-rightleft --disable-arabic

# NLS - National Language Support

# Uncomment this when you do not want to support translated messages, even

# though configure can find support for it.

#CONF_OPT_NLS = --disable-nls

# XIM - X Input Method. Special character input support for X11 (Chinese,

# Japanese, special symbols, etc). Also needed for dead-key support.

# When omitted it's automatically enabled for the X-windows GUI.

#CONF_OPT_INPUT = --enable-xim

#CONF_OPT_INPUT = --disable-xim

# FONTSET - X fontset support for output of languages with many characters.

# Uncomment this when you want to output a multibyte language.

#CONF_OPT_OUTPUT = --enable-fontset

# ACL - Uncomment this when you do not want to include ACL support, even

# though your system does support it. E.g., when it's buggy.

#CONF_OPT_ACL = --disable-acl

# gpm - For mouse support on Linux console via gpm

# Uncomment this when you do not want to include gpm support, even

# though you have gpm libraries and includes.

# For Debian/Ubuntu gpm support requires the libgpm-dev package.

#CONF_OPT_GPM = --disable-gpm

# Use this to enable dynamic loading of the GPM library.

#CONF_OPT_GPM = --enable-gpm=dynamic

# sysmouse - For mouse support on FreeBSD and DragonFly console via sysmouse

# Uncomment this when you do not want do include sysmouse support, even

# though you have /dev/sysmouse and includes.

#CONF_OPT_SYSMOUSE = --disable-sysmouse

# libcanberra - For sound support. Default is on for huge features.

# Uncomment one of the two to chose otherwise.

# CONF_OPT_CANBERRA = --enable-canberra

# CONF_OPT_CANBERRA = --disable-canberra

# libsodium - For enhanced encryption. Default is on.

# Uncomment the next line to not use libsodium

# CONF_OPT_SODIUM = --disable-libsodium

# FEATURES - For creating Vim with more or less features

# Uncomment one of these lines when you want to include few to many features.

# The default is "huge" for most systems.

#CONF_OPT_FEAT = --with-features=tiny

#CONF_OPT_FEAT = --with-features=normal

#CONF_OPT_FEAT = --with-features=huge

# COMPILED BY - For including a specific e-mail address for ":version".

#CONF_OPT_COMPBY = "--with-compiledby=John Doe <JohnDoe@yahoo.com>"

# X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies

# (otherwise Vim configure will try to include xterm titlebar access)

# Also disable the GUI above, otherwise it will be included anyway.

# When both GUI and X11 have been disabled this may save about 15% of the

# code and make Vim startup quicker.

#CONF_OPT_X = --without-x

# X WINDOWS DIRECTORY - specify X directories

# If configure can't find you X stuff, or if you have multiple X11 derivatives

# installed, you may wish to specify which one to use.

# Select nothing to let configure choose.

# This here selects openwin (as found on sun).

#XROOT = /usr/openwin

#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib

# X11 Session Management Protocol support

# Vim will try to use XSMP to catch the user logging out if there are unsaved

# files. Uncomment this line to disable that (it prevents vim trying to open

# communications with the session manager).

#CONF_OPT_XSMP = --disable-xsmp

# You may wish to include xsmp but use exclude xsmp-interact if the logout

# XSMP functionality does not work well with your session-manager (at time of

# writing, this would be early GNOME-1 gnome-session: it 'freezes' other

# applications after Vim has cancelled a logout (until Vim quits). This

# *might* be the Vim code, but is more likely a bug in early GNOME-1.

# This disables the dialog that asks you if you want to save files or not.

#CONF_OPT_XSMP = --disable-xsmp-interact

# If you want to always automatically add a servername, also in the terminal.

#CONF_OPT_AUTOSERVE = --enable-autoservername

# COMPILER - Name of the compiler {{{1

# The default from configure will mostly be fine, no need to change this, just

# an example. If a compiler is defined here, configure will use it rather than

# probing for one. It is dangerous to change this after configure was run.

# Make will use your choice then -- but beware: Many things may change with

# another compiler. It is wise to run 'make reconfig' to start all over

# again.

#CC = cc

#CC = gcc

#CC = clang

# COMPILER FLAGS - change as you please. Either before running {{{1

# configure or afterwards. For examples see below.

# When using -g with some older versions of Linux you might get a

# statically linked executable.

# When not defined, configure will try to use -O2 for gcc and -O for others.

#CFLAGS = -g

#CFLAGS = -O

# Optimization limits - depends on the compiler. Automatic check in configure

# doesn't work very well, because many compilers only give a warning for

# unrecognized arguments.

#CFLAGS = -O -OPT:Olimit=2600

#CFLAGS = -O -Olimit 2000

#CFLAGS = -O -FOlimit,2000

# Often used for GCC: mixed optimizing, lot of optimizing, debugging

#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes

#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes

#CFLAGS = -g -Wall -Wmissing-prototypes

#CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes

#CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes

#CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes

# Use this with GCC to check for mistakes, unused arguments, etc.

# Note: If you use -Wextra and get warnings in GTK code about function

# parameters, you can add -Wno-cast-function-type (but not with clang)

#CFLAGS = -g -Wall -Wextra -Wshadow -Wmissing-prototypes -Wunreachable-code -Wno-cast-function-type -Wno-deprecated-declarations -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1

#CFLAGS = -g -Wall -Wextra -Wshadow -Wmissing-prototypes -Wunreachable-code -Wno-deprecated-declarations -D_REENTRANT -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1

# Add -Wpedantic to find // comments and other C99 constructs.

# Better disable Perl and Python to avoid a lot of warnings.

#CFLAGS = -g -Wall -Wextra -Wshadow -Wmissing-prototypes -Wpedantic -Wunreachable-code -Wunused-result -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1

#CFLAGS = -g -O2 -Wall -Wextra -Wshadow -Wmissing-prototypes -Wpedantic -Wunreachable-code -Wno-cast-function-type -Wunused-result -Wno-deprecated-declarations -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1

#PYTHON_CFLAGS_EXTRA = -Wno-missing-field-initializers

#MZSCHEME_CFLAGS_EXTRA = -Wno-unreachable-code -Wno-unused-parameter

# EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond

# allocated memory (and makes every malloc()/free() very slow).

# Electric Fence is free (search ftp sites).

# You may want to set the EF_PROTECT_BELOW environment variable to check the

# other side of allocated memory.

# On FreeBSD you might need to enlarge the number of mmaps allowed. Do this

# as root: sysctl -w vm.max_proc_mmap=30000

#EXTRA_LIBS = /usr/local/lib/libefence.a

# Autoconf binary.

AUTOCONF ?= autoconf

# PURIFY - remove the # to use the "purify" program (hoi Nia++!)

#PURIFY = purify

# VALGRIND - remove the # to use valgrind for memory leaks and access errors.

# Used for the unittest targets.

# VALGRIND = valgrind --tool=memcheck --leak-check=yes --num-callers=25 --log-file=valgrind.$@

# NBDEBUG - debugging the netbeans interface.

#EXTRA_DEFS = -DNBDEBUG

# }}}

# LINT - for running lint

# For standard Unix lint

LINT = lint

LINT_OPTIONS = -beprxzF

# For splint

# It doesn't work well, crashes on include files and non-ascii characters.

#LINT = splint

#LINT_OPTIONS = +unixlib -weak -macrovarprefixexclude -showfunc -linelen 9999

# PROFILING - Uncomment the next two lines to do profiling with gcc and gprof.

# Might not work with GUI or Perl.

# After running Vim see the profile result with: gprof vim gmon.out | vim -

# Need to recompile everything after changing this: "make clean" "make".

#PROFILE_CFLAGS = -pg -g -DWE_ARE_PROFILING

#PROFILE_LIBS = -pg

# GCC 5 and later need the -no-pie argument.

#PROFILE_LIBS = -pg -no-pie

# For unknown reasons adding "-lc" fixes a linking problem with some versions

# of GCC. That's probably a bug in the "-pg" implementation.

#PROFILE_LIBS = -pg -lc

# TEST COVERAGE - Uncomment the two lines below the explanation to get code

# coverage information. (provided by Yegappan Lakshmanan)

# 1. make clean, run configure and build Vim as usual.

# 2. Generate the baseline code coverage information:

# $ lcov -c -i -b . -d objects -o objects/coverage_base.info

# 3. Run "make test" to run the unit tests. The code coverage information will

# be generated in the src/objects directory.

# 4. Generate the code coverage information from the tests:

# $ lcov -c -b . -d objects/ -o objects/coverage_test.info

# 5. Combine the baseline and test code coverage data:

# $ lcov -a objects/coverage_base.info -a objects/coverage_test.info -o objects/coverage_total.info

# 6. Process the test coverage data and generate a report in html:

# $ genhtml objects/coverage_total.info -o objects

# 7. Open the objects/index.html file in a web browser to view the coverage

# information.

#

# LDFLAGS=--coverage

# PROFILE_CFLAGS=-g -O0 -fprofile-arcs -ftest-coverage -DWE_ARE_PROFILING -DUSE_GCOV_FLUSH

# Alternate flags

# PROFILE_CFLAGS=-g -O0 --coverage -DWE_ARE_PROFILING -DUSE_GCOV_FLUSH

# Uncomment the next lines to compile Vim with the address sanitizer (asan) and

# with the undefined sanitizer. Works with gcc.

# You should also use -DEXITFREE to avoid false reports.

# May make Vim twice as slow. Errors are reported on stderr.

# More at: https://code.google.com/p/address-sanitizer/

# Useful environment variables:

# $ export ASAN_OPTIONS="print_stacktrace=1 log_path=asan"

# $ export LSAN_OPTIONS="suppressions=`pwd`/testdir/lsan-suppress.txt"

# When running tests output can be found in testdir/asan.*

#SANITIZER_CFLAGS = -g -O0 -fsanitize-recover=all \

# -fsanitize=address -fsanitize=undefined \

# -fno-omit-frame-pointer

# Similarly when compiling with clang and using ubsan.

# $ export UBSAN_OPTIONS="print_stacktrace=1 log_path=ubsan"

# $ export LSAN_OPTIONS="suppressions=`pwd`/testdir/lsan-suppress.txt"

# When running tests output can be found in testdir/ubsan.*

#SANITIZER_CFLAGS = -g -O0 -fsanitize-recover=all -fsanitize=address -fsanitize=undefined -fno-omit-frame-pointer

SANITIZER_LIBS = $(SANITIZER_CFLAGS)

# MEMORY LEAK DETECTION

# Requires installing the ccmalloc library.

# Configuration is in the .ccmalloc or ~/.ccmalloc file.

# Doesn't work very well, since memory linked to from global variables

# (in libraries) is also marked as leaked memory.

#LEAK_CFLAGS = -DEXITFREE

#LEAK_LIBS = -lccmalloc

# Uncomment this line to have Vim call abort() when an internal error is

# detected. Useful when using a tool to find errors.

#ABORT_CFLAGS = -DABORT_ON_INTERNAL_ERROR

####################################################

### Specific systems, check if yours is listed ### {{{

####################################################

### Uncomment things here only if the values chosen by configure are wrong.

### It's better to adjust configure.ac and "make autoconf", if you can!

### Then send the required changes to configure.ac to the bugs list.

### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries

###

#CC = shlicc2

#CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin

### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler

### The first probably works on all systems

### The second should work a bit better on newer systems

### The third should work a bit better on HPUX 11.11

### Information provided by: Richard Allen <ra@rhi.hi.is>

#CC = c89 -D_HPUX_SOURCE

#CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE

#CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE

### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes

### is too small to compile many routines. It produces too much defining

### and no space errors.

### Uncomment the following to specify a larger macro definition table.

#CFLAGS = -Wp,-H256000

### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with

### libraries in /usr/lib instead of /lib (avoiding transition links).

### Information provided by: David Green

#XROOT = /usr

#CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6

#GUI_INC_LOC = -I/usr/include/Motif1.2

#GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6

### (5) AIX 4.1.4 with cc

#CFLAGS = -O -qmaxmem=8192

### AIX with c89 (Walter Briscoe)

#CC = c89

#CPPFLAGS = -D_ALL_SOURCE

### AIX 4.3.3.12 with xic 3.6.6 (David R. Favor)

# needed to avoid a problem where strings.h gets included

#CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__

### (7) Solaris 2.4/2.5 with Centerline compiler

#CC = clcc

#X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib

#CFLAGS = -O

### Solaris 2.3 with X11 and specific cc

#CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib

### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc")

#CC = /usr/ucb/cc

#EXTRA_LIBS = -R/usr/ucblib

### Solaris with Forte Developer and NetBeans.

# The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm.

#CC = cc

#XPM_DIR = /usr/local/xpm/xpm-3.4k-solaris

#XPM_LIB = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm

#XPM_IPATH = -I$(XPM_DIR)/include

#EXTRA_LIBS = $(XPM_LIB)

#EXTRA_IPATHS = $(XPM_IPATH)

#EXTRA_DEFS = -xCC -DHAVE_X11_XPM_H

### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this:

#LDFLAGS = -lw -ldl -lXmu

#GUI_LIB_LOC = -L/usr/local/lib

### (8) Unisys 6035 (Glauber Ribeiro)

#EXTRA_LIBS = -lnsl -lsocket -lgen

### When builtin functions cause problems with gcc (for Sun 4.1.x)

#CFLAGS = -O2 -Wall -traditional -Wno-implicit

### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0)

#EXTRA_DEFS = -DDOMAIN

#CFLAGS= -O -A systype,bsd4.3

### Coherent 4.2.10 on Intel 386 platform

#EXTRA_DEFS = -Dvoid=int

#EXTRA_LIBS = -lterm -lsocket

### SCO 3.2, with different library name for terminfo

#EXTRA_LIBS = -ltinfo

### UTS2 for Amdahl UTS 2.1.x

#EXTRA_DEFS = -DUTS2

#EXTRA_LIBS = -lsocket

### UTS4 for Amdahl UTS 4.x

#EXTRA_DEFS = -DUTS4 -Xa

### USL for Unix Systems Laboratories (SYSV 4.2)

#EXTRA_DEFS = -DUSL

### (6) A/UX 3.1.1 with gcc (Jim Jagielski)

#CC= gcc -D_POSIX_SOURCE

#CFLAGS= -O2

#EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11

### (A) Some versions of SCO Open Server 5 (Jan Christiaan van Winkel)

### Also use the CONF_TERM_LIB below!

#EXTRA_LIBS = -lgen

### (D) QNX (by G.F. Desrochers)

#CFLAGS = -g -O -mf -4

### (F) QNX (by John Oleynick)

# 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment

# CONF_OPT_X = --without-x.

# 2. make config

# 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS. It doesn't

# have -ldir (does config find it somewhere?) and -ltermcap has at

# least one problem so I use termlib.o instead. The problem with

# termcap is that it segfaults if you call it with the name of

# a non-existent terminal type.

# 4. edit auto/config.h and add #define USE_TMPNAM

# 5. add termlib.o to OBJ

# 6. make

### (H) for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein)

#EXTRA_LIBS = -lgen

### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z)

#EXTRA_LIBS = -lgen -lnsl

### For SINIX-Y this is needed for the right prototype of gettimeofday()

#EXTRA_DEFS = -D_XPG_IV

### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc

# Use both "-F O3" lines for optimization or the "-g" line for debugging

#EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE

#CFLAGS = -F O3 -DSINIXN

#LDFLAGS = -F O3

#CFLAGS = -g -DSINIXN

### (P) SCO 3.2.42, with different termcap names for some useful keys DJB

#EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY

#EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s

### (P) SuperUX 6.2 on NEC SX-4 (Lennart Schultz)

#GUI_INC_LOC = -I/usr/include

#GUI_LIB_LOC = -L/usr/lib

#EXTRA_LIBS = -lgen

### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz)

#GUI_INC_LOC = -I/usr/necccs/include

#GUI_LIB_LOC = -L/usr/necccs/lib/X11R6

#XROOT = /usr/necccs

#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6

#EXTRA_LIBS = -lsocket -lgen

### (C) On SCO Unix v3.2.5 (and probably other versions) the termcap library,

### which is found by configure, doesn't work correctly. Symptom is the

### error message "Termcap entry too long". Uncomment the next line.

### On AIX 4.2.1 (and other versions probably), libtermcap is reported

### not to display properly.

### after changing this, you need to do "make reconfig".

#CONF_TERM_LIB = --with-tlib=curses

### (E) If you want to use termlib library instead of the automatically found

### one. After changing this, you need to do "make reconfig".

#CONF_TERM_LIB = --with-tlib=termlib

### (a) ESIX V4.2 (Reinhard Wobst)

#EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext

### (c) Tandem/NSK (Matthew Woehlke)

#EXTRA_LIBS = -lfloss

### If you want to use ncurses library instead of the automatically found one

### after changing this, you need to do "make reconfig".

#CONF_TERM_LIB = --with-tlib=ncurses

### For GCC on MS-Windows, the ".exe" suffix will be added.

#EXEEXT = .exe

#LNKEXT = .exe

### (O) For LynxOS 2.5.0, tested on PC.

#EXTRA_LIBS = -lXext -lSM -lICE -lbsd

### For LynxOS 3.0.1, tested on PPC

#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11

### For LynxOS 3.1.0, tested on PC

#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu

### (V) For CX/UX 6.2 (on Harris/Concurrent NightHawk 4800, 5800). Remove

### -Qtarget if only in a 5800 environment. (Kipp E. Howard)

#CFLAGS = -O -Qtarget=m88110compat

#EXTRA_LIBS = -lgen

# The value of QUOTESED comes from auto/config.mk.

# Uncomment the next line to use the default value.

# QUOTESED = sed -e 's/[\\"]/\\&/g' -e 's/\\"/"/' -e 's/\\";$$/";/' -e 's/ */ /g'

##################### end of system specific lines ################### }}}

### Names of the programs and targets {{{1

VIMTARGET = $(VIMNAME)$(EXEEXT)

EXTARGET = $(EXNAME)$(LNKEXT)

VIEWTARGET = $(VIEWNAME)$(LNKEXT)

GVIMNAME = g$(VIMNAME)

GVIMTARGET = $(GVIMNAME)$(LNKEXT)

GVIEWNAME = g$(VIEWNAME)

GVIEWTARGET = $(GVIEWNAME)$(LNKEXT)

RVIMNAME = r$(VIMNAME)

RVIMTARGET = $(RVIMNAME)$(LNKEXT)

RVIEWNAME = r$(VIEWNAME)

RVIEWTARGET = $(RVIEWNAME)$(LNKEXT)

RGVIMNAME = r$(GVIMNAME)

RGVIMTARGET = $(RGVIMNAME)$(LNKEXT)

RGVIEWNAME = r$(GVIEWNAME)

RGVIEWTARGET = $(RGVIEWNAME)$(LNKEXT)

VIMDIFFNAME = $(VIMNAME)diff

GVIMDIFFNAME = g$(VIMDIFFNAME)

VIMDIFFTARGET = $(VIMDIFFNAME)$(LNKEXT)

GVIMDIFFTARGET = $(GVIMDIFFNAME)$(LNKEXT)

EVIMNAME = e$(VIMNAME)

EVIMTARGET = $(EVIMNAME)$(LNKEXT)

EVIEWNAME = e$(VIEWNAME)

EVIEWTARGET = $(EVIEWNAME)$(LNKEXT)

### Names of the tools that are also made {{{1

TOOLS = xxd/xxd$(EXEEXT)

### Installation directories. The defaults come from configure. {{{1

#

### prefix the top directory for the data (default "/usr/local")

#

# Uncomment the next line to install Vim in your home directory.

#prefix = $(HOME)

### exec_prefix is the top directory for the executable (default $(prefix))

#

# Uncomment the next line to install the Vim executable in "/usr/machine/bin"

#exec_prefix = /usr/machine

### BINDIR dir for the executable (default "$(exec_prefix)/bin")

### MANDIR dir for the manual pages (default "$(prefix)/man")

### DATADIR dir for the other files (default "$(prefix)/lib" or

# "$(prefix)/share")

# They may be different when using different architectures for the

# executable and a common directory for the other files.

#

# Uncomment the next line to install Vim in "/usr/bin"

#BINDIR = /usr/bin

# Uncomment the next line to install Vim manuals in "/usr/share/man/man1"

#MANDIR = /usr/share/man

# Uncomment the next line to install Vim help files in "/usr/share/vim"

#DATADIR = /usr/share

### DESTDIR root of the installation tree. This is prepended to the other

# directories. This directory must exist.

#DESTDIR = ~/pkg/vim

### Directory of the man pages

MAN1DIR = /man1

### Vim version (adjusted by a script)

VIMMAJOR = 9

VIMMINOR = 2

### Location of Vim files (should not need to be changed, and {{{1

### some things might not work when they are changed!)

VIMDIR = /vim

VIMRTDIR = /vim$(VIMMAJOR)$(VIMMINOR)

HELPSUBDIR = /doc

COLSUBDIR = /colors

SYNSUBDIR = /syntax

INDSUBDIR = /indent

AUTOSUBDIR = /autoload

IMPORTSUBDIR = /import

PLUGSUBDIR = /plugin

FTPLUGSUBDIR = /ftplugin