/*

* Generated by gdbus-codegen 2.48.2. DO NOT EDIT.

*

* The license of this code is the same as for the source it was derived from.

*/

#ifdef HAVE_CONFIG_H

# include "config.h"

#endif

#include "generated-code.h"

#include <string.h>

#ifdef G_OS_UNIX

# include <gio/gunixfdlist.h>

#endif

typedef struct

{

GDBusArgInfo parent_struct;

gboolean use_gvariant;

} _ExtendedGDBusArgInfo;

typedef struct

{

GDBusMethodInfo parent_struct;

const gchar *signal_name;

gboolean pass_fdlist;

} _ExtendedGDBusMethodInfo;

typedef struct

{

GDBusSignalInfo parent_struct;

const gchar *signal_name;

} _ExtendedGDBusSignalInfo;

typedef struct

{

GDBusPropertyInfo parent_struct;

const gchar *hyphen_name;

gboolean use_gvariant;

} _ExtendedGDBusPropertyInfo;

typedef struct

{

GDBusInterfaceInfo parent_struct;

const gchar *hyphen_name;

} _ExtendedGDBusInterfaceInfo;

typedef struct

{

const _ExtendedGDBusPropertyInfo *info;

guint prop_id;

GValue orig_value; /* the value before the change */

} ChangedProperty;

static void

_changed_property_free (ChangedProperty *data)

{

g_value_unset (&data->orig_value);

g_free (data);

}

static gboolean

_g_strv_equal0 (gchar **a, gchar **b)

{

gboolean ret = FALSE;

guint n;

if (a == NULL && b == NULL)

{

ret = TRUE;

goto out;

}

if (a == NULL || b == NULL)

goto out;

if (g_strv_length (a) != g_strv_length (b))

goto out;

for (n = 0; a[n] != NULL; n++)

if (g_strcmp0 (a[n], b[n]) != 0)

goto out;

ret = TRUE;

out:

return ret;

}

static gboolean

_g_variant_equal0 (GVariant *a, GVariant *b)

{

gboolean ret = FALSE;

if (a == NULL && b == NULL)

{

ret = TRUE;

goto out;

}

if (a == NULL || b == NULL)

goto out;

ret = g_variant_equal (a, b);

out:

return ret;

}

G_GNUC_UNUSED static gboolean

_g_value_equal (const GValue *a, const GValue *b)

{

gboolean ret = FALSE;

g_assert (G_VALUE_TYPE (a) == G_VALUE_TYPE (b));

switch (G_VALUE_TYPE (a))

{

case G_TYPE_BOOLEAN:

ret = (g_value_get_boolean (a) == g_value_get_boolean (b));

break;

case G_TYPE_UCHAR:

ret = (g_value_get_uchar (a) == g_value_get_uchar (b));

break;

case G_TYPE_INT:

ret = (g_value_get_int (a) == g_value_get_int (b));

break;

case G_TYPE_UINT:

ret = (g_value_get_uint (a) == g_value_get_uint (b));

break;

case G_TYPE_INT64:

ret = (g_value_get_int64 (a) == g_value_get_int64 (b));

break;

case G_TYPE_UINT64:

ret = (g_value_get_uint64 (a) == g_value_get_uint64 (b));

break;

case G_TYPE_DOUBLE:

{

/* Avoid -Wfloat-equal warnings by doing a direct bit compare */

gdouble da = g_value_get_double (a);

gdouble db = g_value_get_double (b);

ret = memcmp (&da, &db, sizeof (gdouble)) == 0;

}

break;

case G_TYPE_STRING:

ret = (g_strcmp0 (g_value_get_string (a), g_value_get_string (b)) == 0);

break;

case G_TYPE_VARIANT:

ret = _g_variant_equal0 (g_value_get_variant (a), g_value_get_variant (b));

break;

default:

if (G_VALUE_TYPE (a) == G_TYPE_STRV)

ret = _g_strv_equal0 (g_value_get_boxed (a), g_value_get_boxed (b));

else

g_critical ("_g_value_equal() does not handle type %s", g_type_name (G_VALUE_TYPE (a)));

break;

}

return ret;

}

/* ------------------------------------------------------------------------

* Code for interface org.bluez.Adapter1

* ------------------------------------------------------------------------

*/

/**

* SECTION:Adapter1

* @title: Adapter1

* @short_description: Generated C code for the org.bluez.Adapter1 D-Bus interface

*

* This section contains code for working with the <link linkend="gdbus-interface-org-bluez-Adapter1.top_of_page">org.bluez.Adapter1</link> D-Bus interface in C.

*/

/* ---- Introspection data for org.bluez.Adapter1 ---- */

static const _ExtendedGDBusMethodInfo _adapter1_method_info_start_discovery =

{

{

-1,

(gchar *) "StartDiscovery",

NULL,

NULL,

NULL

},

"handle-start-discovery",

FALSE

};

static const _ExtendedGDBusMethodInfo _adapter1_method_info_stop_discovery =

{

{

-1,

(gchar *) "StopDiscovery",

NULL,

NULL,

NULL

},

"handle-stop-discovery",

FALSE

};

static const _ExtendedGDBusArgInfo _adapter1_method_info_remove_device_IN_ARG_device =

{

{

-1,

(gchar *) "device",

(gchar *) "o",

NULL

},

FALSE

};

static const _ExtendedGDBusArgInfo * const _adapter1_method_info_remove_device_IN_ARG_pointers[] =

{

&_adapter1_method_info_remove_device_IN_ARG_device,

NULL

};

static const _ExtendedGDBusMethodInfo _adapter1_method_info_remove_device =

{

{

-1,

(gchar *) "RemoveDevice",

(GDBusArgInfo **) &_adapter1_method_info_remove_device_IN_ARG_pointers,

NULL,

NULL

},

"handle-remove-device",

FALSE

};

static const _ExtendedGDBusArgInfo _adapter1_method_info_set_discovery_filter_IN_ARG_filter =

{

{

-1,

(gchar *) "filter",

(gchar *) "a{sv}",

NULL

},

FALSE

};

static const _ExtendedGDBusArgInfo * const _adapter1_method_info_set_discovery_filter_IN_ARG_pointers[] =

{

&_adapter1_method_info_set_discovery_filter_IN_ARG_filter,

NULL

};

static const _ExtendedGDBusMethodInfo _adapter1_method_info_set_discovery_filter =

{

{

-1,

(gchar *) "SetDiscoveryFilter",

(GDBusArgInfo **) &_adapter1_method_info_set_discovery_filter_IN_ARG_pointers,

NULL,

NULL

},

"handle-set-discovery-filter",

FALSE

};

static const _ExtendedGDBusMethodInfo * const _adapter1_method_info_pointers[] =

{

&_adapter1_method_info_start_discovery,

&_adapter1_method_info_stop_discovery,

&_adapter1_method_info_remove_device,

&_adapter1_method_info_set_discovery_filter,

NULL

};

static const _ExtendedGDBusPropertyInfo _adapter1_property_info_address =

{

{

-1,

(gchar *) "Address",

(gchar *) "s",

G_DBUS_PROPERTY_INFO_FLAGS_READABLE,

NULL

},

"address",

FALSE

};

static const _ExtendedGDBusPropertyInfo _adapter1_property_info_name =

{

{

-1,

(gchar *) "Name",

(gchar *) "s",

G_DBUS_PROPERTY_INFO_FLAGS_READABLE,

NULL

},

"name",

FALSE

};

static const _ExtendedGDBusPropertyInfo _adapter1_property_info_alias =

{

{

-1,

(gchar *) "Alias",

(gchar *) "s",

G_DBUS_PROPERTY_INFO_FLAGS_READABLE | G_DBUS_PROPERTY_INFO_FLAGS_WRITABLE,

NULL

},

"alias",

FALSE

};

static const _ExtendedGDBusPropertyInfo _adapter1_property_info_class =

{

{

-1,

(gchar *) "Class",

(gchar *) "u",

G_DBUS_PROPERTY_INFO_FLAGS_READABLE,

NULL

},

"class",

FALSE

};

static const _ExtendedGDBusPropertyInfo _adapter1_property_info_powered =

{

{

-1,

(gchar *) "Powered",

(gchar *) "b",

G_DBUS_PROPERTY_INFO_FLAGS_READABLE | G_DBUS_PROPERTY_INFO_FLAGS_WRITABLE,

NULL

},

"powered",

FALSE

};

static const _ExtendedGDBusPropertyInfo _adapter1_property_info_discoverable =

{

{

-1,

(gchar *) "Discoverable",

(gchar *) "b",

G_DBUS_PROPERTY_INFO_FLAGS_READABLE | G_DBUS_PROPERTY_INFO_FLAGS_WRITABLE,

NULL

},

"discoverable",

FALSE

};

static const _ExtendedGDBusPropertyInfo _adapter1_property_info_discoverable_timeout =

{

{

-1,

(gchar *) "DiscoverableTimeout",

(gchar *) "u",

G_DBUS_PROPERTY_INFO_FLAGS_READABLE | G_DBUS_PROPERTY_INFO_FLAGS_WRITABLE,

NULL

},

"discoverable-timeout",

FALSE

};

static const _ExtendedGDBusPropertyInfo _adapter1_property_info_pairable =

{

{

-1,

(gchar *) "Pairable",

(gchar *) "b",

G_DBUS_PROPERTY_INFO_FLAGS_READABLE | G_DBUS_PROPERTY_INFO_FLAGS_WRITABLE,

NULL

},

"pairable",

FALSE

};

static const _ExtendedGDBusPropertyInfo _adapter1_property_info_pairable_timeout =

{

{

-1,

(gchar *) "PairableTimeout",

(gchar *) "u",

G_DBUS_PROPERTY_INFO_FLAGS_READABLE | G_DBUS_PROPERTY_INFO_FLAGS_WRITABLE,

NULL

},

"pairable-timeout",

FALSE

};

static const _ExtendedGDBusPropertyInfo _adapter1_property_info_discovering =

{

{

-1,

(gchar *) "Discovering",

(gchar *) "b",

G_DBUS_PROPERTY_INFO_FLAGS_READABLE,

NULL

},

"discovering",

FALSE

};

static const _ExtendedGDBusPropertyInfo _adapter1_property_info_uuids =

{

{

-1,

(gchar *) "UUIDs",

(gchar *) "as",

G_DBUS_PROPERTY_INFO_FLAGS_READABLE,

NULL

},

"uuids",

FALSE

};

static const _ExtendedGDBusPropertyInfo _adapter1_property_info_modalias =

{

{

-1,

(gchar *) "Modalias",

(gchar *) "s",

G_DBUS_PROPERTY_INFO_FLAGS_READABLE,

NULL

},

"modalias",

FALSE

};

static const _ExtendedGDBusPropertyInfo * const _adapter1_property_info_pointers[] =

{

&_adapter1_property_info_address,

&_adapter1_property_info_name,

&_adapter1_property_info_alias,

&_adapter1_property_info_class,

&_adapter1_property_info_powered,

&_adapter1_property_info_discoverable,

&_adapter1_property_info_discoverable_timeout,

&_adapter1_property_info_pairable,

&_adapter1_property_info_pairable_timeout,

&_adapter1_property_info_discovering,

&_adapter1_property_info_uuids,

&_adapter1_property_info_modalias,

NULL

};

static const _ExtendedGDBusInterfaceInfo _adapter1_interface_info =

{

{

-1,

(gchar *) "org.bluez.Adapter1",

(GDBusMethodInfo **) &_adapter1_method_info_pointers,

NULL,

(GDBusPropertyInfo **) &_adapter1_property_info_pointers,

NULL

},

"adapter1",

};

/**

* adapter1_interface_info:

*

* Gets a machine-readable description of the <link linkend="gdbus-interface-org-bluez-Adapter1.top_of_page">org.bluez.Adapter1</link> D-Bus interface.

*

* Returns: (transfer none): A #GDBusInterfaceInfo. Do not free.

*/

GDBusInterfaceInfo *

adapter1_interface_info (void)

{

return (GDBusInterfaceInfo *) &_adapter1_interface_info.parent_struct;

}

/**

* adapter1_override_properties:

* @klass: The class structure for a #GObject<!-- -->-derived class.

* @property_id_begin: The property id to assign to the first overridden property.

*

* Overrides all #GObject properties in the #Adapter1 interface for a concrete class.

* The properties are overridden in the order they are defined.

*

* Returns: The last property id.

*/

guint

adapter1_override_properties (GObjectClass *klass, guint property_id_begin)

{

g_object_class_override_property (klass, property_id_begin++, "address");

g_object_class_override_property (klass, property_id_begin++, "name");

g_object_class_override_property (klass, property_id_begin++, "alias");

g_object_class_override_property (klass, property_id_begin++, "class");

g_object_class_override_property (klass, property_id_begin++, "powered");

g_object_class_override_property (klass, property_id_begin++, "discoverable");

g_object_class_override_property (klass, property_id_begin++, "discoverable-timeout");

g_object_class_override_property (klass, property_id_begin++, "pairable");

g_object_class_override_property (klass, property_id_begin++, "pairable-timeout");

g_object_class_override_property (klass, property_id_begin++, "discovering");

g_object_class_override_property (klass, property_id_begin++, "uuids");

g_object_class_override_property (klass, property_id_begin++, "modalias");

return property_id_begin - 1;

}

/**

* Adapter1:

*

* Abstract interface type for the D-Bus interface <link linkend="gdbus-interface-org-bluez-Adapter1.top_of_page">org.bluez.Adapter1</link>.

*/

/**

* Adapter1Iface:

* @parent_iface: The parent interface.

* @handle_remove_device: Handler for the #Adapter1::handle-remove-device signal.

* @handle_set_discovery_filter: Handler for the #Adapter1::handle-set-discovery-filter signal.

* @handle_start_discovery: Handler for the #Adapter1::handle-start-discovery signal.

* @handle_stop_discovery: Handler for the #Adapter1::handle-stop-discovery signal.

* @get_address: Getter for the #Adapter1:address property.

* @get_alias: Getter for the #Adapter1:alias property.

* @get_class: Getter for the #Adapter1:class property.

* @get_discoverable: Getter for the #Adapter1:discoverable property.

* @get_discoverable_timeout: Getter for the #Adapter1:discoverable-timeout property.

* @get_discovering: Getter for the #Adapter1:discovering property.

* @get_modalias: Getter for the #Adapter1:modalias property.

* @get_name: Getter for the #Adapter1:name property.

* @get_pairable: Getter for the #Adapter1:pairable property.

* @get_pairable_timeout: Getter for the #Adapter1:pairable-timeout property.

* @get_powered: Getter for the #Adapter1:powered property.

* @get_uuids: Getter for the #Adapter1:uuids property.

*

* Virtual table for the D-Bus interface <link linkend="gdbus-interface-org-bluez-Adapter1.top_of_page">org.bluez.Adapter1</link>.

*/

typedef Adapter1Iface Adapter1Interface;

G_DEFINE_INTERFACE (Adapter1, adapter1, G_TYPE_OBJECT);

static void

adapter1_default_init (Adapter1Iface *iface)

{

/* GObject signals for incoming D-Bus method calls: */

/**

* Adapter1::handle-start-discovery:

* @object: A #Adapter1.

* @invocation: A #GDBusMethodInvocation.

*

* Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-bluez-Adapter1.StartDiscovery">StartDiscovery()</link> D-Bus method.

*

* If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call adapter1_complete_start_discovery() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

*

* Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.

*/

g_signal_new ("handle-start-discovery",

G_TYPE_FROM_INTERFACE (iface),

G_SIGNAL_RUN_LAST,

G_STRUCT_OFFSET (Adapter1Iface, handle_start_discovery),

g_signal_accumulator_true_handled,

NULL,

g_cclosure_marshal_generic,

G_TYPE_BOOLEAN,

1,

G_TYPE_DBUS_METHOD_INVOCATION);

/**

* Adapter1::handle-stop-discovery:

* @object: A #Adapter1.

* @invocation: A #GDBusMethodInvocation.

*

* Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-bluez-Adapter1.StopDiscovery">StopDiscovery()</link> D-Bus method.

*

* If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call adapter1_complete_stop_discovery() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

*

* Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.

*/

g_signal_new ("handle-stop-discovery",

G_TYPE_FROM_INTERFACE (iface),

G_SIGNAL_RUN_LAST,

G_STRUCT_OFFSET (Adapter1Iface, handle_stop_discovery),

g_signal_accumulator_true_handled,

NULL,

g_cclosure_marshal_generic,

G_TYPE_BOOLEAN,

1,

G_TYPE_DBUS_METHOD_INVOCATION);

/**

* Adapter1::handle-remove-device:

* @object: A #Adapter1.

* @invocation: A #GDBusMethodInvocation.

* @arg_device: Argument passed by remote caller.

*

* Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-bluez-Adapter1.RemoveDevice">RemoveDevice()</link> D-Bus method.

*

* If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call adapter1_complete_remove_device() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

*

* Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.

*/

g_signal_new ("handle-remove-device",

G_TYPE_FROM_INTERFACE (iface),

G_SIGNAL_RUN_LAST,

G_STRUCT_OFFSET (Adapter1Iface, handle_remove_device),

g_signal_accumulator_true_handled,

NULL,

g_cclosure_marshal_generic,

G_TYPE_BOOLEAN,

2,

G_TYPE_DBUS_METHOD_INVOCATION, G_TYPE_STRING);

/**

* Adapter1::handle-set-discovery-filter:

* @object: A #Adapter1.

* @invocation: A #GDBusMethodInvocation.

* @arg_filter: Argument passed by remote caller.

*

* Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-bluez-Adapter1.SetDiscoveryFilter">SetDiscoveryFilter()</link> D-Bus method.

*

* If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call adapter1_complete_set_discovery_filter() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

*

* Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.

*/

g_signal_new ("handle-set-discovery-filter",

G_TYPE_FROM_INTERFACE (iface),

G_SIGNAL_RUN_LAST,

G_STRUCT_OFFSET (Adapter1Iface, handle_set_discovery_filter),

g_signal_accumulator_true_handled,

NULL,

g_cclosure_marshal_generic,

G_TYPE_BOOLEAN,

2,

G_TYPE_DBUS_METHOD_INVOCATION, G_TYPE_VARIANT);

/* GObject properties for D-Bus properties: */

/**

* Adapter1:address:

*

* Represents the D-Bus property <link linkend="gdbus-property-org-bluez-Adapter1.Address">"Address"</link>.

*

* Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

*/

g_object_interface_install_property (iface,

g_param_spec_string ("address", "Address", "Address", NULL, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));

/**

* Adapter1:name:

*

* Represents the D-Bus property <link linkend="gdbus-property-org-bluez-Adapter1.Name">"Name"</link>.

*

* Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

*/

g_object_interface_install_property (iface,

g_param_spec_string ("name", "Name", "Name", NULL, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));

/**

* Adapter1:alias:

*

* Represents the D-Bus property <link linkend="gdbus-property-org-bluez-Adapter1.Alias">"Alias"</link>.

*

* Since the D-Bus property for this #GObject property is both readable and writable, it is meaningful to both read from it and write to it on both the service- and client-side.

*/

g_object_interface_install_property (iface,

g_param_spec_string ("alias", "Alias", "Alias", NULL, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));

/**

* Adapter1:class:

*

* Represents the D-Bus property <link linkend="gdbus-property-org-bluez-Adapter1.Class">"Class"</link>.

*

* Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

*/

g_object_interface_install_property (iface,

g_param_spec_uint ("class", "Class", "Class", 0, G_MAXUINT32, 0, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));

/**

* Adapter1:powered:

*

* Represents the D-Bus property <link linkend="gdbus-property-org-bluez-Adapter1.Powered">"Powered"</link>.

*

* Since the D-Bus property for this #GObject property is both readable and writable, it is meaningful to both read from it and write to it on both the service- and client-side.

*/

g_object_interface_install_property (iface,

g_param_spec_boolean ("powered", "Powered", "Powered", FALSE, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));

/**

* Adapter1:discoverable:

*

* Represents the D-Bus property <link linkend="gdbus-property-org-bluez-Adapter1.Discoverable">"Discoverable"</link>.

*

* Since the D-Bus property for this #GObject property is both readable and writable, it is meaningful to both read from it and write to it on both the service- and client-side.

*/

g_object_interface_install_property (iface,

g_param_spec_boolean ("discoverable", "Discoverable", "Discoverable", FALSE, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));

/**

* Adapter1:discoverable-timeout:

*

* Represents the D-Bus property <link linkend="gdbus-property-org-bluez-Adapter1.DiscoverableTimeout">"DiscoverableTimeout"</link>.

*

* Since the D-Bus property for this #GObject property is both readable and writable, it is meaningful to both read from it and write to it on both the service- and client-side.

*/

g_object_interface_install_property (iface,

g_param_spec_uint ("discoverable-timeout", "DiscoverableTimeout", "DiscoverableTimeout", 0, G_MAXUINT32, 0, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));

/**

* Adapter1:pairable:

*

* Represents the D-Bus property <link linkend="gdbus-property-org-bluez-Adapter1.Pairable">"Pairable"</link>.

*

* Since the D-Bus property for this #GObject property is both readable and writable, it is meaningful to both read from it and write to it on both the service- and client-side.

*/

g_object_interface_install_property (iface,

g_param_spec_boolean ("pairable", "Pairable", "Pairable", FALSE, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));

/**

* Adapter1:pairable-timeout:

*

* Represents the D-Bus property <link linkend="gdbus-property-org-bluez-Adapter1.PairableTimeout">"PairableTimeout"</link>.

*

* Since the D-Bus property for this #GObject property is both readable and writable, it is meaningful to both read from it and write to it on both the service- and client-side.

*/

g_object_interface_install_property (iface,

g_param_spec_uint ("pairable-timeout", "PairableTimeout", "PairableTimeout", 0, G_MAXUINT32, 0, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));

/**

* Adapter1:discovering:

*

* Represents the D-Bus property <link linkend="gdbus-property-org-bluez-Adapter1.Discovering">"Discovering"</link>.

*

* Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

*/

g_object_interface_install_property (iface,

g_param_spec_boolean ("discovering", "Discovering", "Discovering", FALSE, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));

/**

* Adapter1:uuids:

*

* Represents the D-Bus property <link linkend="gdbus-property-org-bluez-Adapter1.UUIDs">"UUIDs"</link>.

*

* Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

*/

g_object_interface_install_property (iface,

g_param_spec_boxed ("uuids", "UUIDs", "UUIDs", G_TYPE_STRV, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));

/**

* Adapter1:modalias:

*

* Represents the D-Bus property <link linkend="gdbus-property-org-bluez-Adapter1.Modalias">"Modalias"</link>.

*

* Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

*/

g_object_interface_install_property (iface,

g_param_spec_string ("modalias", "Modalias", "Modalias", NULL, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));

}

/**

* adapter1_get_address: (skip)

* @object: A #Adapter1.

*

* Gets the value of the <link linkend="gdbus-property-org-bluez-Adapter1.Address">"Address"</link> D-Bus property.

*

* Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

*

* <warning>The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where @object was constructed. Use adapter1_dup_address() if on another thread.</warning>

*

* Returns: (transfer none): The property value or %NULL if the property is not set. Do not free the returned value, it belongs to @object.

*/

const gchar *

adapter1_get_address (Adapter1 *object)

{

return ADAPTER1_GET_IFACE (object)->get_address (object);

}

/**

* adapter1_dup_address: (skip)

* @object: A #Adapter1.

*

* Gets a copy of the <link linkend="gdbus-property-org-bluez-Adapter1.Address">"Address"</link> D-Bus property.

*

* Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

*

* Returns: (transfer full): The property value or %NULL if the property is not set. The returned value should be freed with g_free().

*/

gchar *

adapter1_dup_address (Adapter1 *object)

{

gchar *value;

g_object_get (G_OBJECT (object), "address", &value, NULL);

return value;

}

/**

* adapter1_set_address: (skip)

* @object: A #Adapter1.

* @value: The value to set.

*

* Sets the <link linkend="gdbus-property-org-bluez-Adapter1.Address">"Address"</link> D-Bus property to @value.

*

* Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

*/

void

adapter1_set_address (Adapter1 *object, const gchar *value)

{

g_object_set (G_OBJECT (object), "address", value, NULL);

}

/**

* adapter1_get_name: (skip)

* @object: A #Adapter1.

*

* Gets the value of the <link linkend="gdbus-property-org-bluez-Adapter1.Name">"Name"</link> D-Bus property.

*

* Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

*

* <warning>The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where @object was constructed. Use adapter1_dup_name() if on another thread.</warning>

*

* Returns: (transfer none): The property value or %NULL if the property is not set. Do not free the returned value, it belongs to @object.

*/

const gchar *

adapter1_get_name (Adapter1 *object)

{

return ADAPTER1_GET_IFACE (object)->get_name (object);

}

/**

* adapter1_dup_name: (skip)

* @object: A #Adapter1.

*

* Gets a copy of the <link linkend="gdbus-property-org-bluez-Adapter1.Name">"Name"</link> D-Bus property.

*

* Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

*

* Returns: (transfer full): The property value or %NULL if the property is not set. The returned value should be freed with g_free().

*/

gchar *

adapter1_dup_name (Adapter1 *object)

{

gchar *value;

g_object_get (G_OBJECT (object), "name", &value, NULL);

return value;

}

/**

* adapter1_set_name: (skip)

* @object: A #Adapter1.

* @value: The value to set.

*

* Sets the <link linkend="gdbus-property-org-bluez-Adapter1.Name">"Name"</link> D-Bus property to @value.

*

* Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

*/

void

adapter1_set_name (Adapter1 *object, const gchar *value)

{

g_object_set (G_OBJECT (object), "name", value, NULL);

}

/**

* adapter1_get_alias: (skip)

* @object: A #Adapter1.

*

* Gets the value of the <link linkend="gdbus-property-org-bluez-Adapter1.Alias">"Alias"</link> D-Bus property.

*

* Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side.

*

* <warning>The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where @object was constructed. Use adapter1_dup_alias() if on another thread.</warning>

*

* Returns: (transfer none): The property value or %NULL if the property is not set. Do not free the returned value, it belongs to @object.

*/

const gchar *

adapter1_get_alias (Adapter1 *object)

{

return ADAPTER1_GET_IFACE (object)->get_alias (object);

}

/**

* adapter1_dup_alias: (skip)

* @object: A #Adapter1.

*

* Gets a copy of the <link linkend="gdbus-property-org-bluez-Adapter1.Alias">"Alias"</link> D-Bus property.

*

* Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side.

*

* Returns: (transfer full): The property value or %NULL if the property is not set. The returned value should be freed with g_free().

*/

gchar *

adapter1_dup_alias (Adapter1 *object)

{

gchar *value;

g_object_get (G_OBJECT (object), "alias", &value, NULL);

return value;

}

/**

* adapter1_set_alias: (skip)

* @object: A #Adapter1.

* @value: The value to set.

*

* Sets the <link linkend="gdbus-property-org-bluez-Adapter1.Alias">"Alias"</link> D-Bus property to @value.

*

* Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side.

*/

void

adapter1_set_alias (Adapter1 *object, const gchar *value)

{

g_object_set (G_OBJECT (object), "alias", value, NULL);

}

/**

* adapter1_get_class: (skip)

* @object: A #Adapter1.

*

* Gets the value of the <link linkend="gdbus-property-org-bluez-Adapter1.Class">"Class"</link> D-Bus property.

*

* Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

*

* Returns: The property value.

*/

guint

adapter1_get_class (Adapter1 *object)

{

return ADAPTER1_GET_IFACE (object)->get_class (object);

}

/**

* adapter1_set_class: (skip)

* @object: A #Adapter1.

* @value: The value to set.

*

* Sets the <link linkend="gdbus-property-org-bluez-Adapter1.Class">"Class"</link> D-Bus property to @value.

*

* Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

*/

void

adapter1_set_class (Adapter1 *object, guint value)

{

g_object_set (G_OBJECT (object), "class", value, NULL);

}

/**

* adapter1_get_powered: (skip)

* @object: A #Adapter1.

*

* Gets the value of the <link linkend="gdbus-property-org-bluez-Adapter1.Powered">"Powered"</link> D-Bus property.

*

* Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side.

*

* Returns: The property value.

*/

gboolean

adapter1_get_powered (Adapter1 *object)

{

return ADAPTER1_GET_IFACE (object)->get_powered (object);

}

/**

* adapter1_set_powered: (skip)

* @object: A #Adapter1.

* @value: The value to set.

*

* Sets the <link linkend="gdbus-property-org-bluez-Adapter1.Powered">"Powered"</link> D-Bus property to @value.

*

* Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side.

*/

void

adapter1_set_powered (Adapter1 *object, gboolean value)

{

g_object_set (G_OBJECT (object), "powered", value, NULL);

}

/**

* adapter1_get_discoverable: (skip)

* @object: A #Adapter1.

*

* Gets the value of the <link linkend="gdbus-property-org-bluez-Adapter1.Discoverable">"Discoverable"</link> D-Bus property.

*

* Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side.

*

* Returns: The property value.

*/

gboolean

adapter1_get_discoverable (Adapter1 *object)

{

return ADAPTER1_GET_IFACE (object)->get_discoverable (object);

}

/**

* adapter1_set_discoverable: (skip)

* @object: A #Adapter1.

* @value: The value to set.

*

* Sets the <link linkend="gdbus-property-org-bluez-Adapter1.Discoverable">"Discoverable"</link> D-Bus property to @value.

*

* Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side.

*/

void

adapter1_set_discoverable (Adapter1 *object, gboolean value)

{

g_object_set (G_OBJECT (object), "discoverable", value, NULL);

}

/**

* adapter1_get_discoverable_timeout: (skip)

* @object: A #Adapter1.

*

* Gets the value of the <link linkend="gdbus-property-org-bluez-Adapter1.DiscoverableTimeout">"DiscoverableTimeout"</link> D-Bus property.

*

* Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side.

*

* Returns: The property value.

*/

guint

adapter1_get_discoverable_timeout (Adapter1 *object)

{

return ADAPTER1_GET_IFACE (object)->get_discoverable_timeout (object);

}

/**

* adapter1_set_discoverable_timeout: (skip)

* @object: A #Adapter1.

* @value: The value to set.

*

* Sets the <link linkend="gdbus-property-org-bluez-Adapter1.DiscoverableTimeout">"DiscoverableTimeout"</link> D-Bus property to @value.

*

* Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side.

*/

void

adapter1_set_discoverable_timeout (Adapter1 *object, guint value)