# encoding: utf-8
# module _socket
# from E:\Python34\DLLs\_socket.pyd
# by generator 1.144
"""
Implementation module for socket operations.

See the socket module for documentation.
"""
# no imports

# Variables with simple values

AF_APPLETALK = 16
AF_DECnet = 12
AF_INET = 2
AF_INET6 = 23
AF_IPX = 6
AF_IRDA = 26
AF_SNA = 11
AF_UNSPEC = 0

AI_ADDRCONFIG = 1024
AI_ALL = 256
AI_CANONNAME = 2
AI_NUMERICHOST = 4
AI_NUMERICSERV = 8
AI_PASSIVE = 1
AI_V4MAPPED = 2048

EAI_AGAIN = 11002
EAI_BADFLAGS = 10022
EAI_FAIL = 11003
EAI_FAMILY = 10047
EAI_MEMORY = 8
EAI_NODATA = 11001
EAI_NONAME = 11001
EAI_SERVICE = 10109
EAI_SOCKTYPE = 10044

has_ipv6 = True

INADDR_ALLHOSTS_GROUP = -536870911

INADDR_ANY = 0
INADDR_BROADCAST = -1
INADDR_LOOPBACK = 2130706433

INADDR_MAX_LOCAL_GROUP = -536870657

INADDR_NONE = -1

INADDR_UNSPEC_GROUP = -536870912

IPPORT_RESERVED = 1024
IPPORT_USERRESERVED = 5000

IPPROTO_ICMP = 1
IPPROTO_IP = 0
IPPROTO_RAW = 255
IPPROTO_TCP = 6
IPPROTO_UDP = 17

IPV6_CHECKSUM = 26
IPV6_DONTFRAG = 14
IPV6_HOPLIMIT = 21
IPV6_HOPOPTS = 1

IPV6_JOIN_GROUP = 12

IPV6_LEAVE_GROUP = 13

IPV6_MULTICAST_HOPS = 10
IPV6_MULTICAST_IF = 9
IPV6_MULTICAST_LOOP = 11

IPV6_PKTINFO = 19
IPV6_RECVRTHDR = 38
IPV6_RECVTCLASS = 40
IPV6_RTHDR = 32
IPV6_TCLASS = 39

IPV6_UNICAST_HOPS = 4

IPV6_V6ONLY = 27

IP_ADD_MEMBERSHIP = 12

IP_DROP_MEMBERSHIP = 13

IP_HDRINCL = 2

IP_MULTICAST_IF = 9
IP_MULTICAST_LOOP = 11
IP_MULTICAST_TTL = 10

IP_OPTIONS = 1
IP_RECVDSTADDR = 25
IP_TOS = 3
IP_TTL = 4

MSG_BCAST = 1024
MSG_CTRUNC = 512
MSG_DONTROUTE = 4
MSG_MCAST = 2048
MSG_OOB = 1
MSG_PEEK = 2
MSG_TRUNC = 256

NI_DGRAM = 16
NI_MAXHOST = 1025
NI_MAXSERV = 32
NI_NAMEREQD = 4
NI_NOFQDN = 1
NI_NUMERICHOST = 2
NI_NUMERICSERV = 8

RCVALL_MAX = 3
RCVALL_OFF = 0
RCVALL_ON = 1
RCVALL_SOCKETLEVELONLY = 2

SHUT_RD = 0
SHUT_RDWR = 2
SHUT_WR = 1

SIO_KEEPALIVE_VALS = 2550136836

SIO_RCVALL = 2550136833

SOCK_DGRAM = 2
SOCK_RAW = 3
SOCK_RDM = 4
SOCK_SEQPACKET = 5
SOCK_STREAM = 1

SOL_IP = 0
SOL_SOCKET = 65535
SOL_TCP = 6
SOL_UDP = 17

SOMAXCONN = 2147483647
SO_ACCEPTCONN = 2
SO_BROADCAST = 32
SO_DEBUG = 1
SO_DONTROUTE = 16
SO_ERROR = 4103
SO_EXCLUSIVEADDRUSE = -5
SO_KEEPALIVE = 8
SO_LINGER = 128
SO_OOBINLINE = 256
SO_RCVBUF = 4098
SO_RCVLOWAT = 4100
SO_RCVTIMEO = 4102
SO_REUSEADDR = 4
SO_SNDBUF = 4097
SO_SNDLOWAT = 4099
SO_SNDTIMEO = 4101
SO_TYPE = 4104
SO_USELOOPBACK = 64

TCP_MAXSEG = 4
TCP_NODELAY = 1

# functions

def dup(integer): # real signature unknown; restored from __doc__
    """
    dup(integer) -> integer
    
    Duplicate an integer socket file descriptor.  This is like os.dup(), but for
    sockets; on some platforms os.dup() won't work for socket file descriptors.
    """
    return 0

def getaddrinfo(host, port, family=None, type=None, proto=None, flags=None): # real signature unknown; restored from __doc__
    """
    getaddrinfo(host, port [, family, type, proto, flags])
        -> list of (family, type, proto, canonname, sockaddr)
    
    Resolve host and port into addrinfo struct.
    """
    return []

def getdefaulttimeout(): # real signature unknown; restored from __doc__
    """
    getdefaulttimeout() -> timeout
    
    Returns the default timeout in seconds (float) for new socket objects.
    A value of None indicates that new socket objects have no timeout.
    When the socket module is first imported, the default is None.
    """
    return timeout

def gethostbyaddr(host): # real signature unknown; restored from __doc__
    """
    gethostbyaddr(host) -> (name, aliaslist, addresslist)
    
    Return the true host name, a list of aliases, and a list of IP addresses,
    for a host.  The host argument is a string giving a host name or IP number.
    """
    pass

def gethostbyname(host): # real signature unknown; restored from __doc__
    """
    gethostbyname(host) -> address
    
    Return the IP address (a string of the form '255.255.255.255') for a host.
    """
    pass

def gethostbyname_ex(host): # real signature unknown; restored from __doc__
    """
    gethostbyname_ex(host) -> (name, aliaslist, addresslist)
    
    Return the true host name, a list of aliases, and a list of IP addresses,
    for a host.  The host argument is a string giving a host name or IP number.
    """
    pass

def gethostname(): # real signature unknown; restored from __doc__
    """
    gethostname() -> string
    
    Return the current host name.
    """
    return ""

def getnameinfo(sockaddr, flags): # real signature unknown; restored from __doc__
    """
    getnameinfo(sockaddr, flags) --> (host, port)
    
    Get host and port for a sockaddr.
    """
    pass

def getprotobyname(name): # real signature unknown; restored from __doc__
    """
    getprotobyname(name) -> integer
    
    Return the protocol number for the named protocol.  (Rarely used.)
    """
    return 0

def getservbyname(servicename, protocolname=None): # real signature unknown; restored from __doc__
    """
    getservbyname(servicename[, protocolname]) -> integer
    
    Return a port number from a service name and protocol name.
    The optional protocol name, if given, should be 'tcp' or 'udp',
    otherwise any protocol will match.
    """
    return 0

def getservbyport(port, protocolname=None): # real signature unknown; restored from __doc__
    """
    getservbyport(port[, protocolname]) -> string
    
    Return the service name from a port number and protocol name.
    The optional protocol name, if given, should be 'tcp' or 'udp',
    otherwise any protocol will match.
    """
    return ""

def htonl(integer): # real signature unknown; restored from __doc__
    """
    htonl(integer) -> integer
    
    Convert a 32-bit integer from host to network byte order.
    """
    return 0

def htons(integer): # real signature unknown; restored from __doc__
    """
    htons(integer) -> integer
    
    Convert a 16-bit integer from host to network byte order.
    """
    return 0

def inet_aton(string): # real signature unknown; restored from __doc__
    """
    inet_aton(string) -> bytes giving packed 32-bit IP representation
    
    Convert an IP address in string format (123.45.67.89) to the 32-bit packed
    binary format used in low-level network functions.
    """
    return b""

def inet_ntoa(packed_ip): # real signature unknown; restored from __doc__
    """
    inet_ntoa(packed_ip) -> ip_address_string
    
    Convert an IP address from 32-bit packed binary format to string format
    """
    pass

def inet_ntop(af, packed_ip): # real signature unknown; restored from __doc__
    """
    inet_ntop(af, packed_ip) -> string formatted IP address
    
    Convert a packed IP address of the given family to string format.
    """
    return ""

def inet_pton(af, ip): # real signature unknown; restored from __doc__
    """
    inet_pton(af, ip) -> packed IP address string
    
    Convert an IP address from string format to a packed string suitable
    for use with low-level network functions.
    """
    pass

def ntohl(integer): # real signature unknown; restored from __doc__
    """
    ntohl(integer) -> integer
    
    Convert a 32-bit integer from network to host byte order.
    """
    return 0

def ntohs(integer): # real signature unknown; restored from __doc__
    """
    ntohs(integer) -> integer
    
    Convert a 16-bit integer from network to host byte order.
    """
    return 0

def setdefaulttimeout(timeout): # real signature unknown; restored from __doc__
    """
    setdefaulttimeout(timeout)
    
    Set the default timeout in seconds (float) for new socket objects.
    A value of None indicates that new socket objects have no timeout.
    When the socket module is first imported, the default is None.
    """
    pass

# classes

class error(Exception):
    """ Base class for I/O related errors. """
    def __init__(self, *args, **kwargs): # real signature unknown
        pass

    @staticmethod # known case of __new__
    def __new__(*args, **kwargs): # real signature unknown
        """ Create and return a new object.  See help(type) for accurate signature. """
        pass

    def __reduce__(self, *args, **kwargs): # real signature unknown
        pass

    def __str__(self, *args, **kwargs): # real signature unknown
        """ Return str(self). """
        pass

    characters_written = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default

    errno = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default
    """POSIX exception code"""

    filename = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default
    """exception filename"""

    filename2 = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default
    """second exception filename"""

    strerror = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default
    """exception strerror"""

    winerror = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default
    """Win32 exception code"""



class gaierror(OSError):
    # no doc
    def __init__(self, *args, **kwargs): # real signature unknown
        pass

    __weakref__ = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default
    """list of weak references to the object (if defined)"""



class herror(OSError):
    # no doc
    def __init__(self, *args, **kwargs): # real signature unknown
        pass

    __weakref__ = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default
    """list of weak references to the object (if defined)"""



class SocketType(object):
    """
    socket(family=AF_INET, type=SOCK_STREAM, proto=0, fileno=None) -> socket object
    
    Open a socket of the given type.  The family argument specifies the
    address family; it defaults to AF_INET.  The type argument specifies
    whether this is a stream (SOCK_STREAM, this is the default)
    or datagram (SOCK_DGRAM) socket.  The protocol argument defaults to 0,
    specifying the default protocol.  Keyword arguments are accepted.
    The socket is created as non-inheritable.
    
    A socket object represents one endpoint of a network connection.
    
    Methods of socket objects (keyword arguments not allowed):
    
    _accept() -- accept connection, returning new socket fd and client address
    bind(addr) -- bind the socket to a local address
    close() -- close the socket
    connect(addr) -- connect the socket to a remote address
    connect_ex(addr) -- connect, return an error code instead of an exception
    dup() -- return a new socket fd duplicated from fileno()
    fileno() -- return underlying file descriptor
    getpeername() -- return remote address [*]
    getsockname() -- return local address
    getsockopt(level, optname[, buflen]) -- get socket options
    gettimeout() -- return timeout or None
    listen(n) -- start listening for incoming connections
    recv(buflen[, flags]) -- receive data
    recv_into(buffer[, nbytes[, flags]]) -- receive data (into a buffer)
    recvfrom(buflen[, flags]) -- receive data and sender's address
    recvfrom_into(buffer[, nbytes, [, flags])
      -- receive data and sender's address (into a buffer)
    sendall(data[, flags]) -- send all data
    send(data[, flags]) -- send data, may not send all of it
    sendto(data[, flags], addr) -- send data to a given address
    setblocking(0 | 1) -- set or clear the blocking I/O flag
    setsockopt(level, optname, value) -- set socket options
    settimeout(None | float) -- set or clear the timeout
    shutdown(how) -- shut down traffic in one or both directions
    if_nameindex() -- return all network interface indices and names
    if_nametoindex(name) -- return the corresponding interface index
    if_indextoname(index) -- return the corresponding interface name
    
     [*] not available on all platforms!
    """
    def bind(self, address): # real signature unknown; restored from __doc__
        """
        bind(address)
        
        Bind the socket to a local address.  For IP sockets, the address is a
        pair (host, port); the host must refer to the local host. For raw packet
        sockets the address is a tuple (ifname, proto [,pkttype [,hatype]])
        """
        pass

    def close(self): # real signature unknown; restored from __doc__
        """
        close()
        
        Close the socket.  It cannot be used after this call.
        """
        pass

    def connect(self, address): # real signature unknown; restored from __doc__
        """
        connect(address)
        
        Connect the socket to a remote address.  For IP sockets, the address
        is a pair (host, port).
        """
        pass

    def connect_ex(self, address): # real signature unknown; restored from __doc__
        """
        connect_ex(address) -> errno
        
        This is like connect(address), but returns an error code (the errno value)
        instead of raising an exception when an error occurs.
        """
        pass

    def detach(self): # real signature unknown; restored from __doc__
        """
        detach()
        
        Close the socket object without closing the underlying file descriptor.
        The object cannot be used after this call, but the file descriptor
        can be reused for other purposes.  The file descriptor is returned.
        """
        pass

    def fileno(self): # real signature unknown; restored from __doc__
        """
        fileno() -> integer
        
        Return the integer file descriptor of the socket.
        """
        return 0

    def getpeername(self): # real signature unknown; restored from __doc__
        """
        getpeername() -> address info
        
        Return the address of the remote endpoint.  For IP sockets, the address
        info is a pair (hostaddr, port).
        """
        pass

    def getsockname(self): # real signature unknown; restored from __doc__
        """
        getsockname() -> address info
        
        Return the address of the local endpoint.  For IP sockets, the address
        info is a pair (hostaddr, port).
        """
        pass

    def getsockopt(self, level, option, buffersize=None): # real signature unknown; restored from __doc__
        """
        getsockopt(level, option[, buffersize]) -> value
        
        Get a socket option.  See the Unix manual for level and option.
        If a nonzero buffersize argument is given, the return value is a
        string of that length; otherwise it is an integer.
        """
        pass

    def gettimeout(self): # real signature unknown; restored from __doc__
        """
        gettimeout() -> timeout
        
        Returns the timeout in seconds (float) associated with socket 
        operations. A timeout of None indicates that timeouts on socket 
        operations are disabled.
        """
        return timeout

    def ioctl(self, cmd, option): # real signature unknown; restored from __doc__
        """
        ioctl(cmd, option) -> long
        
        Control the socket with WSAIoctl syscall. Currently supported 'cmd' values are
        SIO_RCVALL:  'option' must be one of the socket.RCVALL_* constants.
        SIO_KEEPALIVE_VALS:  'option' is a tuple of (onoff, timeout, interval).
        """
        return 0

    def listen(self, backlog): # real signature unknown; restored from __doc__
        """
        listen(backlog)
        
        Enable a server to accept connections.  The backlog argument must be at
        least 0 (if it is lower, it is set to 0); it specifies the number of
        unaccepted connections that the system will allow before refusing new
        connections.
        """
        pass

    def recv(self, buffersize, flags=None): # real signature unknown; restored from __doc__
        """
        recv(buffersize[, flags]) -> data
        
        Receive up to buffersize bytes from the socket.  For the optional flags
        argument, see the Unix manual.  When no data is available, block until
        at least one byte is available or until the remote end is closed.  When
        the remote end is closed and all data is read, return the empty string.
        """
        pass

    def recvfrom(self, buffersize, flags=None): # real signature unknown; restored from __doc__
        """
        recvfrom(buffersize[, flags]) -> (data, address info)
        
        Like recv(buffersize, flags) but also return the sender's address info.
        """
        pass

    def recvfrom_into(self, buffer, nbytes=None, flags=None): # real signature unknown; restored from __doc__
        """
        recvfrom_into(buffer[, nbytes[, flags]]) -> (nbytes, address info)
        
        Like recv_into(buffer[, nbytes[, flags]]) but also return the sender's address info.
        """
        pass

    def recv_into(self, buffer, nbytes=None, flags=None): # real signature unknown; restored from __doc__
        """
        recv_into(buffer, [nbytes[, flags]]) -> nbytes_read
        
        A version of recv() that stores its data into a buffer rather than creating 
        a new string.  Receive up to buffersize bytes from the socket.  If buffersize 
        is not specified (or 0), receive up to the size available in the given buffer.
        
        See recv() for documentation about the flags.
        """
        pass

    def send(self, data, flags=None): # real signature unknown; restored from __doc__
        """
        send(data[, flags]) -> count
        
        Send a data string to the socket.  For the optional flags
        argument, see the Unix manual.  Return the number of bytes
        sent; this may be less than len(data) if the network is busy.
        """
        pass

    def sendall(self, data, flags=None): # real signature unknown; restored from __doc__
        """
        sendall(data[, flags])
        
        Send a data string to the socket.  For the optional flags
        argument, see the Unix manual.  This calls send() repeatedly
        until all data is sent.  If an error occurs, it's impossible
        to tell how much data has been sent.
        """
        pass

    def sendto(self, data, flags=None, *args, **kwargs): # real signature unknown; NOTE: unreliably restored from __doc__ 
        """
        sendto(data[, flags], address) -> count
        
        Like send(data, flags) but allows specifying the destination address.
        For IP sockets, the address is a pair (hostaddr, port).
        """
        pass

    def setblocking(self, flag): # real signature unknown; restored from __doc__
        """
        setblocking(flag)
        
        Set the socket to blocking (flag is true) or non-blocking (false).
        setblocking(True) is equivalent to settimeout(None);
        setblocking(False) is equivalent to settimeout(0.0).
        """
        pass

    def setsockopt(self, level, option, value): # real signature unknown; restored from __doc__
        """
        setsockopt(level, option, value)
        
        Set a socket option.  See the Unix manual for level and option.
        The value argument can either be an integer or a string.
        """
        pass

    def settimeout(self, timeout): # real signature unknown; restored from __doc__
        """
        settimeout(timeout)
        
        Set a timeout on socket operations.  'timeout' can be a float,
        giving in seconds, or None.  Setting a timeout of None disables
        the timeout feature and is equivalent to setblocking(1).
        Setting a timeout of zero is the same as setblocking(0).
        """
        pass

    def share(self, process_id): # real signature unknown; restored from __doc__
        """
        share(process_id) -> bytes
        
        Share the socket with another process.  The target process id
        must be provided and the resulting bytes object passed to the target
        process.  There the shared socket can be instantiated by calling
        socket.fromshare().
        """
        return b""

    def shutdown(self, flag): # real signature unknown; restored from __doc__
        """
        shutdown(flag)
        
        Shut down the reading side of the socket (flag == SHUT_RD), the writing side
        of the socket (flag == SHUT_WR), or both ends (flag == SHUT_RDWR).
        """
        pass

    def _accept(self): # real signature unknown; restored from __doc__
        """
        _accept() -> (integer, address info)
        
        Wait for an incoming connection.  Return a new socket file descriptor
        representing the connection, and the address of the client.
        For IP sockets, the address info is a pair (hostaddr, port).
        """
        pass

    def __getattribute__(self, *args, **kwargs): # real signature unknown
        """ Return getattr(self, name). """
        pass

    def __init__(self, *args, **kwargs): # real signature unknown
        pass

    @staticmethod # known case of __new__
    def __new__(*args, **kwargs): # real signature unknown
        """ Create and return a new object.  See help(type) for accurate signature. """
        pass

    def __repr__(self, *args, **kwargs): # real signature unknown
        """ Return repr(self). """
        pass

    family = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default
    """the socket family"""

    proto = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default
    """the socket protocol"""

    timeout = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default
    """the socket timeout"""

    type = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default
    """the socket type"""



socket = SocketType


class timeout(OSError):
    # no doc
    def __init__(self, *args, **kwargs): # real signature unknown
        pass

    __weakref__ = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default
    """list of weak references to the object (if defined)"""



# variables with complex values

CAPI = None # (!) real value is ''

__loader__ = None # (!) real value is ''

__spec__ = None # (!) real value is ''