tests: Add a suite of tests specifically for the pyboard.

dpgeorge · dpgeorge · commit 41f768f3f336 · 2014-05-03T16:43:27.000+01:00
In tests/pyb is now a suite of tests that tests the pyb module on the
pyboard.  They include expected output files because we can't run
CPython on the pyboard to compare against.

run-tests script has now been updated to allow pyboard tests to be run.
Just pass the option --pyboard.  This runs all basic, float and pyb
tests.  Note that float/math-fun.py currently fails because not all math
functions are implemented in stmhal/.
diff --git a/tests/pyb/accel.py b/tests/pyb/accel.py
@@ -0,0 +1,7 @@
+accel = pyb.Accel()
+print(accel)
+accel.x()
+accel.y()
+accel.z()
+accel.tilt()
+accel.filtered_xyz()
diff --git a/tests/pyb/accel.py.exp b/tests/pyb/accel.py.exp
@@ -0,0 +1 @@
+<Accel>
diff --git a/tests/pyb/adc.py b/tests/pyb/adc.py
@@ -0,0 +1,10 @@
+from pyb import ADC
+from pyb import Pin
+
+adc = ADC('X22')
+print(adc)
+
+adc.read()
+
+buf = bytearray(100)
+adc.read_timed(buf, 500)
diff --git a/tests/pyb/adc.py.exp b/tests/pyb/adc.py.exp
@@ -0,0 +1 @@
+<ADC on X22 channel=13>
diff --git a/tests/pyb/dac.py b/tests/pyb/dac.py
@@ -0,0 +1,8 @@
+dac = pyb.DAC(1)
+print(dac)
+dac.noise(100)
+dac.triangle(100)
+dac.write(0)
+dac.write_timed(bytearray(10), 100, mode=pyb.DAC.NORMAL)
+pyb.delay(20)
+dac.write(0)
diff --git a/tests/pyb/dac.py.exp b/tests/pyb/dac.py.exp
@@ -0,0 +1 @@
+<DAC>
diff --git a/tests/pyb/extint.py b/tests/pyb/extint.py
@@ -0,0 +1,6 @@
+ext = pyb.ExtInt('X1', pyb.ExtInt.IRQ_RISING, pyb.Pin.PULL_DOWN, lambda l:print('line:', l))
+ext.disable()
+ext.enable()
+print(ext.line())
+ext.swint()
+ext.disable()
diff --git a/tests/pyb/extint.py.exp b/tests/pyb/extint.py.exp
@@ -0,0 +1,2 @@
+0
+line: 0
diff --git a/tests/pyb/i2c.py b/tests/pyb/i2c.py
@@ -0,0 +1,23 @@
+from pyb import I2C
+
+i2c = I2C(1)
+i2c2 = I2C(2)
+
+i2c.init(I2C.MASTER, baudrate=400000)
+print(i2c.scan())
+i2c.deinit()
+
+# use accelerometer to test i2c bus
+
+accel_addr = 76
+
+pyb.Accel() # this will init the bus for us
+
+print(i2c.scan())
+print(i2c.is_ready(accel_addr))
+
+print(i2c.mem_read(1, accel_addr, 7, timeout=500))
+i2c.mem_write(0, accel_addr, 0, timeout=500)
+
+i2c.send(7, addr=accel_addr)
+i2c.recv(1, addr=accel_addr)
diff --git a/tests/pyb/i2c.py.exp b/tests/pyb/i2c.py.exp
@@ -0,0 +1,4 @@
+[]
+[76]
+True
+b'\x01'
diff --git a/tests/pyb/led.py b/tests/pyb/led.py
@@ -0,0 +1,28 @@
+from pyb import LED
+
+for i in range(4):
+    print(LED(i+1))
+
+for i in range(4):
+    LED(i+1).on()
+pyb.delay(10)
+for i in range(4):
+    LED(i+1).off()
+pyb.delay(10)
+for i in range(4):
+    LED(i+1).toggle()
+pyb.delay(10)
+for i in range(4):
+    LED(i+1).intensity(0)
+
+for i in range(256):
+    LED(4).intensity(i)
+    if LED(4).intensity() != i:
+        print('fail', i)
+    pyb.delay(1)
+for i in range(256):
+    LED(4).intensity(255 - i)
+    pyb.delay(1)
+
+for i in range(4):
+    LED(i+1).off()
diff --git a/tests/pyb/led.py.exp b/tests/pyb/led.py.exp
@@ -0,0 +1,4 @@
+<LED 1>
+<LED 2>
+<LED 3>
+<LED 4>
diff --git a/tests/pyb/pin.py b/tests/pyb/pin.py
@@ -0,0 +1,29 @@
+from pyb import Pin
+
+p = Pin('X1')
+print(p)
+print(p.name())
+print(p.pin())
+print(p.port())
+
+p = Pin('X1', Pin.IN, Pin.PULL_UP)
+#p = Pin('X1', Pin.IN, pull=Pin.PULL_UP)
+print(p.value())
+
+p.init(p.IN, p.PULL_DOWN)
+#p.init(p.IN, pull=p.PULL_DOWN)
+print(p.value())
+
+p.init(p.OUT_PP)
+p.low()
+print(p.value())
+p.high()
+print(p.value())
+p.value(0)
+print(p.value())
+p.value(1)
+print(p.value())
+p.value(False)
+print(p.value())
+p.value(True)
+print(p.value())
diff --git a/tests/pyb/pin.py.exp b/tests/pyb/pin.py.exp
@@ -0,0 +1,12 @@
+<Pin A0>
+A0
+0
+0
+1
+0
+0
+1
+0
+1
+0
+1
diff --git a/tests/pyb/pyb1.py b/tests/pyb/pyb1.py
@@ -0,0 +1,42 @@
+# basic tests of pyb module
+
+import pyb
+
+# test delay
+
+pyb.delay(-1)
+pyb.delay(0)
+pyb.delay(1)
+
+start = pyb.millis()
+pyb.delay(17)
+print((pyb.millis() - start) // 5) # should print 3
+
+# test udelay
+
+pyb.udelay(-1)
+pyb.udelay(0)
+pyb.udelay(1)
+
+start = pyb.millis()
+pyb.udelay(17000)
+print((pyb.millis() - start) // 5) # should print 3
+
+# other
+
+pyb.disable_irq()
+pyb.enable_irq()
+
+print(pyb.freq())
+
+print(pyb.have_cdc())
+
+pyb.hid((0, 0, 0, 0)) # won't do anything
+
+pyb.rng()
+
+pyb.sync()
+
+print(len(pyb.unique_id()))
+
+pyb.wfi()
diff --git a/tests/pyb/pyb1.py.exp b/tests/pyb/pyb1.py.exp
@@ -0,0 +1,5 @@
+3
+3
+(168000000, 168000000, 42000000, 84000000)
+True
+12
diff --git a/tests/pyb/rtc.py b/tests/pyb/rtc.py
@@ -0,0 +1,6 @@
+from pyb import RTC
+rtc = RTC()
+print(rtc)
+rtc.datetime((2014, 1, 1, 1, 0, 0, 0, 0))
+pyb.delay(1000)
+print(rtc.datetime()[:7])
diff --git a/tests/pyb/rtc.py.exp b/tests/pyb/rtc.py.exp
@@ -0,0 +1,2 @@
+<RTC>
+(2014, 1, 1, 1, 0, 0, 1)
diff --git a/tests/pyb/servo.py b/tests/pyb/servo.py
@@ -0,0 +1,16 @@
+from pyb import Servo
+
+servo = Servo(1)
+print(servo)
+
+servo.angle(0)
+servo.angle(10, 100)
+
+servo.speed(-10)
+servo.speed(10, 100)
+
+servo.pulse_width(1500)
+print(servo.pulse_width())
+
+servo.calibration(630, 2410, 1490, 2460, 2190)
+print(servo.calibration())
diff --git a/tests/pyb/servo.py.exp b/tests/pyb/servo.py.exp
@@ -0,0 +1,3 @@
+<Servo 1 at 1500us>
+1500
+(630, 2410, 1490, 2460, 2190)
diff --git a/tests/pyb/spi.py b/tests/pyb/spi.py
@@ -0,0 +1,17 @@
+from pyb import SPI
+
+spi = SPI(1)
+print(spi)
+
+spi = SPI(1, SPI.MASTER)
+spi = SPI(1, SPI.MASTER, baudrate=500000)
+spi = SPI(1, SPI.MASTER, 500000, polarity=1, phase=1, bits=8, firstbit=SPI.MSB, ti=False, crc=None)
+print(spi)
+
+spi.init(SPI.SLAVE)
+print(spi)
+
+spi.init(SPI.MASTER)
+spi.send(1, timeout=100)
+print(spi.recv(1, timeout=100))
+print(spi.send_recv(1, timeout=100))
diff --git a/tests/pyb/spi.py.exp b/tests/pyb/spi.py.exp
@@ -0,0 +1,5 @@
+SPI(1)
+SPI(1, SPI.MASTER, baudrate=328125, polarity=1, phase=1, bits=8)
+SPI(1, SPI.SLAVE, polarity=1, phase=1, bits=8)
+b'\xff'
+b'\xff'
diff --git a/tests/pyb/switch.py b/tests/pyb/switch.py
@@ -0,0 +1,6 @@
+from pyb import Switch
+
+sw = pyb.Switch()
+print(sw())
+sw.callback(print)
+sw.callback(None)
diff --git a/tests/pyb/switch.py.exp b/tests/pyb/switch.py.exp
@@ -0,0 +1 @@
+False
diff --git a/tests/pyb/timer.py b/tests/pyb/timer.py
@@ -0,0 +1,28 @@
+from pyb import Timer
+
+tim = Timer(4)
+tim = Timer(4, prescaler=100, period=200)
+print(tim.prescaler())
+print(tim.period())
+tim.prescaler(300)
+print(tim.prescaler())
+tim.period(400)
+print(tim.period())
+
+tim = Timer(4, freq=1)
+tim.init(freq=2000)
+def f(t):
+    print(1)
+    t.callback(None)
+tim.callback(f)
+pyb.delay(10)
+
+# f3 closes over f2.y
+def f2(x):
+    y = x
+    def f3(t):
+        print(2, y)
+        t.callback(None)
+    return f3
+tim.callback(f2(3))
+pyb.delay(10)
diff --git a/tests/pyb/timer.py.exp b/tests/pyb/timer.py.exp
@@ -0,0 +1,6 @@
+100
+200
+300
+400
+1
+2 3
diff --git a/tests/pyb/uart.py b/tests/pyb/uart.py
@@ -0,0 +1,12 @@
+from pyb import UART
+
+uart = UART(1)
+uart = UART(1, 9600)
+uart = UART(1, 9600, bits=8, stop=1, parity=None)
+print(uart)
+
+uart.init(1200)
+print(uart)
+
+uart.any()
+uart.send(1, timeout=500)
diff --git a/tests/pyb/uart.py.exp b/tests/pyb/uart.py.exp
@@ -0,0 +1,2 @@
+UART(1, baudrate=9600, bits=8, stop=1, parity=None)
+UART(1, baudrate=1200, bits=8, stop=1, parity=None)
diff --git a/tests/pyboard.py b/tests/pyboard.py
@@ -0,0 +1 @@
+../tools/pyboard.py
diff --git a/tests/run-tests b/tests/run-tests

-Original file line number
+Diff line change
@@ @@ -0,0 +1,4 @@ @@
 +[]
 +[76]
 +True
 +b'\x01'