Requested changes take 1

mdroberts1243 · mdroberts1243 · commit b92154357145 · 2020-09-25T21:27:29.000-04:00
diff --git a/ports/atmel-samd/boards/hallowing_m0_express/board.c b/ports/atmel-samd/boards/hallowing_m0_express/board.c
@@ -110,7 +110,8 @@ void board_init(void) {
         false, // data_as_commands
         true, // auto_refresh
         60, // native_frames_per_second
-        true); // backlight_on_high
+        true, // backlight_on_high
+        false); // not SH1107
 }
 
 bool board_requests_safe_mode(void) {
diff --git a/ports/atmel-samd/boards/hallowing_m4_express/board.c b/ports/atmel-samd/boards/hallowing_m4_express/board.c
@@ -91,7 +91,8 @@ void board_init(void) {
         false, // data_as_commands
         true, // auto_refresh
         60, // native_frames_per_second
-        true); // backlight_on_high
+        true, // backlight_on_high
+        false); // not SH1107
 }
 
 bool board_requests_safe_mode(void) {
diff --git a/ports/atmel-samd/boards/monster_m4sk/board.c b/ports/atmel-samd/boards/monster_m4sk/board.c
@@ -92,7 +92,8 @@ void board_init(void) {
         false, // data_as_commands
         true, // auto_refresh
         60, // native_frames_per_second
-        true); // backlight_on_high
+        true, // backlight_on_high
+        false); // SH1107_addressing
 }
 
 bool board_requests_safe_mode(void) {
diff --git a/ports/atmel-samd/boards/pewpew_m4/board.c b/ports/atmel-samd/boards/pewpew_m4/board.c
@@ -143,7 +143,8 @@ void board_init(void) {
         false, // data_as_commands
         false, // auto_refresh
         20, // native_frames_per_second
-        true); // backlight_on_high
+        true, // backlight_on_high
+        false); // SH1107_addressing
 }
 
 bool board_requests_safe_mode(void) {
diff --git a/ports/atmel-samd/boards/pybadge/board.c b/ports/atmel-samd/boards/pybadge/board.c
@@ -114,7 +114,8 @@ void board_init(void) {
         false, // data_as_commands
         true, // auto_refresh
         60, // native_frames_per_second
-        true); // backlight_on_high
+        true, // backlight_on_high
+        false); // SH1107_addressing
 }
 
 bool board_requests_safe_mode(void) {
diff --git a/ports/atmel-samd/boards/pybadge_airlift/board.c b/ports/atmel-samd/boards/pybadge_airlift/board.c
@@ -92,7 +92,8 @@ void board_init(void) {
         false, // data_as_commands
         true, // auto_refresh
         60, // native_frames_per_second
-        true); // backlight_on_high
+        true, // backlight_on_high
+        false); // SH1107_addressing
 }
 
 bool board_requests_safe_mode(void) {
diff --git a/ports/atmel-samd/boards/pygamer/board.c b/ports/atmel-samd/boards/pygamer/board.c
@@ -114,7 +114,8 @@ void board_init(void) {
         false, // data_as_commands
         true, // auto_refresh
         60, // native_frames_per_second
-        true); // backlight_on_high
+        true, // backlight_on_high
+        false); // SH1107_addressing
 }
 
 bool board_requests_safe_mode(void) {
diff --git a/ports/atmel-samd/boards/pygamer_advance/board.c b/ports/atmel-samd/boards/pygamer_advance/board.c
@@ -92,7 +92,8 @@ void board_init(void) {
         false, // data_as_commands
         true, // auto_refresh
         60, // native_frames_per_second
-        true); // backlight_on_high
+        true, // backlight_on_high
+        false); // SH1107_addressing
 }
 
 bool board_requests_safe_mode(void) {
diff --git a/ports/atmel-samd/boards/pyportal/board.c b/ports/atmel-samd/boards/pyportal/board.c
@@ -100,7 +100,8 @@ void board_init(void) {
         false, // data_as_commands
         true, // auto_refresh
         60, // native_frames_per_second
-        true); // backlight_on_high
+        true, // backlight_on_high
+        false); // SH1107_addressing
 }
 
 bool board_requests_safe_mode(void) {
diff --git a/ports/atmel-samd/boards/pyportal_titano/board.c b/ports/atmel-samd/boards/pyportal_titano/board.c
@@ -117,7 +117,8 @@ void board_init(void) {
         false, // data_as_commands
         true, // auto_refresh
         60, // native_frames_per_second
-        true); // backlight_on_high
+        true, // backlight_on_high
+        false); // SH1107_addressing
 }
 
 bool board_requests_safe_mode(void) {
diff --git a/ports/atmel-samd/boards/seeeduino_wio_terminal/board.c b/ports/atmel-samd/boards/seeeduino_wio_terminal/board.c
@@ -105,7 +105,8 @@ void board_init(void) {
         false, // data_as_commands
         true, // auto_refresh
         60, // native_frames_per_second
-        true); // backlight_on_high
+        true, // backlight_on_high
+        false); // SH1107_addressing
 }
 
 bool board_requests_safe_mode(void) {
diff --git a/ports/nrf/boards/clue_nrf52840_express/board.c b/ports/nrf/boards/clue_nrf52840_express/board.c
@@ -91,7 +91,8 @@ void board_init(void) {
         false, // data_as_commands
         true, // auto_refresh
         60, // native_frames_per_second
-        true); // backlight_on_high
+        true, // backlight_on_high
+        false); // not SH1107
 }
 
 bool board_requests_safe_mode(void) {
diff --git a/ports/nrf/boards/hiibot_bluefi/board.c b/ports/nrf/boards/hiibot_bluefi/board.c
@@ -92,7 +92,8 @@ void board_init(void) {
         false, // data_as_commands
         true, // auto_refresh
         60, // native_frames_per_second
-        true); // backlight_on_high
+        true, // backlight_on_high
+        false); // SH1107_addressing
 }
 
 bool board_requests_safe_mode(void) {
diff --git a/ports/nrf/boards/makerdiary_nrf52840_m2_devkit/board.c b/ports/nrf/boards/makerdiary_nrf52840_m2_devkit/board.c
@@ -92,7 +92,8 @@ void board_init(void) {
         false, // data_as_commands
         true, // auto_refresh
         60, // native_frames_per_second
-        true); // backlight_on_high
+        true, // backlight_on_high
+        false); // SH1107_addressing
 }
 
 bool board_requests_safe_mode(void) {
diff --git a/ports/nrf/boards/ohs2020_badge/board.c b/ports/nrf/boards/ohs2020_badge/board.c
@@ -91,7 +91,8 @@ void board_init(void) {
         false, // data_as_commands
         true, // auto_refresh
         60, // native_frames_per_second
-        false); // backlight_on_high
+        false, // backlight_on_high
+        false); // SH1107_addressing
 }
 
 bool board_requests_safe_mode(void) {
diff --git a/ports/stm/boards/meowbit_v121/board.c b/ports/stm/boards/meowbit_v121/board.c
@@ -111,7 +111,8 @@ void board_init(void) {
         false, // data_as_commands
         true, // auto_refresh
         60, // native_frames_per_second
-        true); // backlight_on_high
+        true, // backlight_on_high
+        false); // SH1107_addressing
 }
 
 bool board_requests_safe_mode(void) {
diff --git a/shared-module/displayio/Display.c b/shared-module/displayio/Display.c
@@ -252,14 +252,8 @@ STATIC bool _refresh_area(displayio_display_obj_t* self, const displayio_area_t*
     //      write one single row at a time
     if (self->SH1107_addressing) {
         subrectangles = rows_per_buffer;  // vertical (column mode) write each separately (height times)
-    }
-
-    // Skip this recalculation of subrectangles if SH1107 (each subrectangle is a single row)
-    // [mdroberts1243] I am worried/confused about the pixels_in_byte_share_row calculation though
-    //       since it makes sense to be on a byte boundary (actually a page boundary too)
-    //       seems to work as is though.
-    if ((displayio_area_size(&clipped) > buffer_size * pixels_per_word)
-                    && (!self->SH1107_addressing)) {
+        rows_per_buffer = 1;
+    } else if (displayio_area_size(&clipped) > buffer_size * pixels_per_word) {
         rows_per_buffer = buffer_size * pixels_per_word / displayio_area_width(&clipped);
         if (rows_per_buffer == 0) {
             rows_per_buffer = 1;
@@ -297,18 +291,13 @@ STATIC bool _refresh_area(displayio_display_obj_t* self, const displayio_area_t*
             .y2 = clipped.y1 + rows_per_buffer * (j + 1)
         };
         if (self->SH1107_addressing) {
-                // one row only for SH1107 in vertical (column) mode
-                subrectangle.y1 = clipped.y1 + j;
-                subrectangle.y2 = clipped.y1 + (j + 1);
-            };
-        if ((remaining_rows < rows_per_buffer) && (!self->SH1107_addressing)) {
+            // one row only for SH1107 in vertical (column) mode
+            subrectangle.y1 = clipped.y1 + j;
+            subrectangle.y2 = clipped.y1 + (j + 1);
+        } else if (remaining_rows < rows_per_buffer) {
             subrectangle.y2 = subrectangle.y1 + remaining_rows;
         }
-        if (self->SH1107_addressing) {
-            remaining_rows -= 1;
-        } else {
-            remaining_rows -= rows_per_buffer;
-        }
+        remaining_rows -= rows_per_buffer;
 
         displayio_display_core_set_region_to_update(&self->core, self->set_column_command, 
               self->set_row_command, NO_COMMAND, NO_COMMAND, self->data_as_commands, false, 
diff --git a/shared-module/displayio/display_core.c b/shared-module/displayio/display_core.c
@@ -41,7 +41,7 @@
 #include <string.h>
 
 #define DISPLAYIO_CORE_DEBUG(...) (void)0
-//#define DISPLAYIO_CORE_DEBUG(...) mp_printf(&mp_plat_print __VA_OPT__(,) __VA_ARGS__)
+// #define DISPLAYIO_CORE_DEBUG(...) mp_printf(&mp_plat_print __VA_OPT__(,) __VA_ARGS__)
 
 void displayio_display_core_construct(displayio_display_core_t* self,
         mp_obj_t bus, uint16_t width, uint16_t height, uint16_t ram_width, uint16_t ram_height, int16_t colstart, int16_t rowstart, uint16_t rotation,
@@ -322,7 +322,7 @@ void displayio_display_core_start_refresh(displayio_display_core_t* self) {
 
 void displayio_display_core_finish_refresh(displayio_display_core_t* self) {
     if (self->current_group != NULL) {
-//       DISPLAYIO_CORE_DEBUG("displayiocore group_finish_refresh\n");
+        DISPLAYIO_CORE_DEBUG("displayiocore group_finish_refresh\n");
         displayio_group_finish_refresh(self->current_group);
     }
     self->full_refresh = false;

Original file line number	Diff line number	Diff line change
`@@ -110,7 +110,8 @@ void board_init(void) {`
`110`	`110`	`false, // data_as_commands`
`111`	`111`	`true, // auto_refresh`
`112`	`112`	`60, // native_frames_per_second`
`113`		`- true); // backlight_on_high`
	`113`	`+ true, // backlight_on_high`
	`114`	`+ false); // not SH1107`
`114`	`115`	`}`
`115`	`116`
`116`	`117`	`bool board_requests_safe_mode(void) {`
Original file line number	Diff line number	Diff line change
`@@ -91,7 +91,8 @@ void board_init(void) {`
`91`	`91`	`false, // data_as_commands`
`92`	`92`	`true, // auto_refresh`
`93`	`93`	`60, // native_frames_per_second`
`94`		`- true); // backlight_on_high`
	`94`	`+ true, // backlight_on_high`
	`95`	`+ false); // not SH1107`
`95`	`96`	`}`
`96`	`97`
`97`	`98`	`bool board_requests_safe_mode(void) {`
Original file line number	Diff line number	Diff line change
`@@ -92,7 +92,8 @@ void board_init(void) {`
`92`	`92`	`false, // data_as_commands`
`93`	`93`	`true, // auto_refresh`
`94`	`94`	`60, // native_frames_per_second`
`95`		`- true); // backlight_on_high`
	`95`	`+ true, // backlight_on_high`
	`96`	`+ false); // SH1107_addressing`
`96`	`97`	`}`
`97`	`98`
`98`	`99`	`bool board_requests_safe_mode(void) {`
Original file line number	Diff line number	Diff line change
`@@ -143,7 +143,8 @@ void board_init(void) {`
`143`	`143`	`false, // data_as_commands`
`144`	`144`	`false, // auto_refresh`
`145`	`145`	`20, // native_frames_per_second`
`146`		`- true); // backlight_on_high`
	`146`	`+ true, // backlight_on_high`
	`147`	`+ false); // SH1107_addressing`
`147`	`148`	`}`
`148`	`149`
`149`	`150`	`bool board_requests_safe_mode(void) {`
Original file line number	Diff line number	Diff line change
`@@ -114,7 +114,8 @@ void board_init(void) {`
`114`	`114`	`false, // data_as_commands`
`115`	`115`	`true, // auto_refresh`
`116`	`116`	`60, // native_frames_per_second`
`117`		`- true); // backlight_on_high`
	`117`	`+ true, // backlight_on_high`
	`118`	`+ false); // SH1107_addressing`
`118`	`119`	`}`
`119`	`120`
`120`	`121`	`bool board_requests_safe_mode(void) {`
Original file line number	Diff line number	Diff line change
`@@ -100,7 +100,8 @@ void board_init(void) {`
`100`	`100`	`false, // data_as_commands`
`101`	`101`	`true, // auto_refresh`
`102`	`102`	`60, // native_frames_per_second`
`103`		`- true); // backlight_on_high`
	`103`	`+ true, // backlight_on_high`
	`104`	`+ false); // SH1107_addressing`
`104`	`105`	`}`
`105`	`106`
`106`	`107`	`bool board_requests_safe_mode(void) {`
Original file line number	Diff line number	Diff line change
`@@ -117,7 +117,8 @@ void board_init(void) {`
`117`	`117`	`false, // data_as_commands`
`118`	`118`	`true, // auto_refresh`
`119`	`119`	`60, // native_frames_per_second`
`120`		`- true); // backlight_on_high`
	`120`	`+ true, // backlight_on_high`
	`121`	`+ false); // SH1107_addressing`
`121`	`122`	`}`
`122`	`123`
`123`	`124`	`bool board_requests_safe_mode(void) {`