# SPDX-FileCopyrightText: 2018 Pierrick Couturier <arofarn@arofarn.info>

# SPDX-FileCopyrightText: 2018 Olivier Deveault <odeevee@outlook.com>

# SPDX-FileCopyrightText: 2014 MicroPython & CircuitPython contributors (https://github.com/adafruit/circuitpython/graphs/contributors)

#

# SPDX-License-Identifier: MIT

msgid ""

msgstr ""

"Project-Id-Version: 0.1\n"

"Report-Msgid-Bugs-To: \n"

"POT-Creation-Date: 2020-10-10 23:49-0700\n"

"PO-Revision-Date: 2020-10-12 21:00+0000\n"

"Last-Translator: Noel Gaetan <gaetan.noel@viacesi.fr>\n"

"Language: fr\n"

"MIME-Version: 1.0\n"

"Content-Type: text/plain; charset=utf-8\n"

"Content-Transfer-Encoding: 8bit\n"

"Plural-Forms: nplurals=2; plural=n > 1;\n"

"X-Generator: Weblate 4.3-dev\n"

#: main.c

msgid ""

"\n"

"Code done running. Waiting for reload.\n"

msgstr ""

"\n"

"Fin d'éxecution du code. En attente de recharge.\n"

#: supervisor/shared/safe_mode.c

msgid ""

"\n"

"Please file an issue with the contents of your CIRCUITPY drive at \n"

"https://github.com/adafruit/circuitpython/issues\n"

msgstr ""

"\n"

"Veuillez signaler un problème avec le contenu de votre lecteur CIRCUITPY à "

"l'adresse\n"

"https://github.com/adafruit/circuitpython/issues\n"

#: py/obj.c

msgid " File \"%q\""

msgstr " Fichier \"%q\""

#: py/obj.c

msgid " File \"%q\", line %d"

msgstr " Fichier \"%q\", ligne %d"

#: main.c

msgid " output:\n"

msgstr " sortie :\n"

#: py/objstr.c

#, c-format

msgid "%%c requires int or char"

msgstr "%%c nécessite un entier 'int' ou un caractère 'char'"

#: shared-bindings/rgbmatrix/RGBMatrix.c

#, c-format

msgid "%d address pins and %d rgb pins indicate a height of %d, not %d"

msgstr ""

"Les broches d'adresse %d et les broches RVB %d indiquent une hauteur de %d, "

"pas %d"

#: ports/atmel-samd/common-hal/sdioio/SDCard.c

msgid "%q failure: %d"

msgstr "Échec de %q : %d"

#: shared-bindings/microcontroller/Pin.c

msgid "%q in use"

msgstr "%q utilisé"

#: extmod/moductypes.c ports/atmel-samd/common-hal/pulseio/PulseIn.c

#: ports/cxd56/common-hal/pulseio/PulseIn.c

#: ports/nrf/common-hal/pulseio/PulseIn.c

#: ports/stm/common-hal/pulseio/PulseIn.c py/obj.c py/objstr.c

#: py/objstrunicode.c

msgid "%q index out of range"

msgstr "index %q hors gamme"

#: py/obj.c

msgid "%q indices must be integers, not %q"

msgstr "indices %q doivent être des chiffres entier, et non %q"

#: shared-bindings/vectorio/Polygon.c

msgid "%q list must be a list"

msgstr "La liste %q doit être une liste"

#: shared-bindings/memorymonitor/AllocationAlarm.c

msgid "%q must be >= 0"

msgstr "%q doit être >= 0"

#: shared-bindings/_bleio/CharacteristicBuffer.c

#: shared-bindings/_bleio/PacketBuffer.c shared-bindings/displayio/Group.c

#: shared-bindings/displayio/Shape.c

#: shared-bindings/memorymonitor/AllocationAlarm.c

#: shared-bindings/vectorio/Circle.c shared-bindings/vectorio/Rectangle.c

msgid "%q must be >= 1"

msgstr "%q doit être >=1"

#: shared-module/vectorio/Polygon.c

msgid "%q must be a tuple of length 2"

msgstr "%q doit être un tuple de longueur 2"

#: shared-bindings/canio/Match.c

msgid "%q out of range"

msgstr "%q est hors de porté"

#: ports/atmel-samd/common-hal/microcontroller/Pin.c

msgid "%q pin invalid"

msgstr "PIN %q invalide"

#: shared-bindings/fontio/BuiltinFont.c

msgid "%q should be an int"

msgstr "%q doit être un entier (int)"

#: py/bc.c py/objnamedtuple.c

msgid "%q() takes %d positional arguments but %d were given"

msgstr "%q() prend %d arguments positionnels mais %d ont été donnés"

#: py/argcheck.c

msgid "'%q' argument required"

msgstr "'%q' argument requis"

#: py/runtime.c

msgid "'%q' object cannot assign attribute '%q'"

msgstr "object '%q' ne peut assigner l'attribut '%q'"

#: py/proto.c

msgid "'%q' object does not support '%q'"

msgstr "object '%q' ne supporte pas '%q'"

#: py/obj.c

msgid "'%q' object does not support item assignment"

msgstr "objet '%q' ne supporte pas l'assignement d'objets"

#: py/obj.c

msgid "'%q' object does not support item deletion"

msgstr "object '%q' ne supported pas la suppression d'objet"

#: py/runtime.c

msgid "'%q' object has no attribute '%q'"

msgstr "object '%q' n'as pas d'attribut '%q'"

#: py/runtime.c

msgid "'%q' object is not an iterator"

msgstr "object '%q' n'est pas un itérateur"

#: py/objtype.c py/runtime.c

msgid "'%q' object is not callable"

msgstr "object '%q' ne peut pas être appelé"

#: py/runtime.c

msgid "'%q' object is not iterable"

msgstr "objet '%q' n'est pas iterable"

#: py/obj.c

msgid "'%q' object is not subscriptable"

msgstr "objet '%q' n'est pas souscriptable"

#: py/emitinlinethumb.c py/emitinlinextensa.c

#, c-format

msgid "'%s' expects a label"

msgstr "'%s' attend un label"

#: py/emitinlinethumb.c py/emitinlinextensa.c

#, c-format

msgid "'%s' expects a register"

msgstr "'%s' attend un registre"

#: py/emitinlinethumb.c

#, c-format

msgid "'%s' expects a special register"

msgstr "'%s' attend un registre special"

#: py/emitinlinethumb.c

#, c-format

msgid "'%s' expects an FPU register"

msgstr "'%s' attend un registre FPU"

#: py/emitinlinethumb.c

#, c-format

msgid "'%s' expects an address of the form [a, b]"

msgstr "'%s' attend une adresse de la forme [a, b]"

#: py/emitinlinethumb.c py/emitinlinextensa.c

#, c-format

msgid "'%s' expects an integer"

msgstr "'%s' attend un entier"

#: py/emitinlinethumb.c

#, c-format

msgid "'%s' expects at most r%d"

msgstr "'%s' s'attend au plus à r%d"

#: py/emitinlinethumb.c

#, c-format

msgid "'%s' expects {r0, r1, ...}"

msgstr "'%s' attend {r0, r1, ...}"

#: py/emitinlinextensa.c

#, c-format

msgid "'%s' integer %d is not within range %d..%d"

msgstr "'%s' l'entier %d n'est pas dans la gamme %d..%d"

#: py/emitinlinethumb.c

#, c-format

msgid "'%s' integer 0x%x does not fit in mask 0x%x"

msgstr "'%s' l'entier 0x%x ne correspond pas au masque 0x%x"

#: py/objstr.c

msgid "'=' alignment not allowed in string format specifier"

msgstr "'=' alignement non autorisé dans la spéc. de format de chaîne"

#: shared-module/struct/__init__.c

msgid "'S' and 'O' are not supported format types"

msgstr "'S' et 'O' ne sont pas des types de format supportés"

#: py/compile.c

msgid "'align' requires 1 argument"

msgstr "'align' nécessite 1 argument"

#: py/compile.c

msgid "'await' outside function"

msgstr "'await' en dehors d'une fonction"

#: py/compile.c

msgid "'await', 'async for' or 'async with' outside async function"

msgstr "'await', 'async for' ou 'async with' au dehors d'une fonction async"

#: py/compile.c

msgid "'break' outside loop"

msgstr "'break' en dehors d'une boucle"

#: py/compile.c

msgid "'continue' outside loop"

msgstr "'continue' en dehors d'une boucle"

#: py/objgenerator.c

msgid "'coroutine' object is not an iterator"

msgstr "L'objet « coroutine » n'est pas un itérateur"

#: py/compile.c

msgid "'data' requires at least 2 arguments"

msgstr "'data' nécessite au moins 2 arguments"

#: py/compile.c

msgid "'data' requires integer arguments"

msgstr "'data' nécessite des arguments entiers"

#: py/compile.c

msgid "'label' requires 1 argument"

msgstr "'label' nécessite 1 argument"

#: py/compile.c

msgid "'return' outside function"

msgstr "'return' en dehors d'une fonction"

#: py/compile.c

msgid "'yield from' inside async function"

msgstr ""

#: py/compile.c

msgid "'yield' outside function"

msgstr "'yield' en dehors d'une fonction"

#: py/compile.c

msgid "*x must be assignment target"

msgstr "*x doit être la cible de l'assignement"

#: py/obj.c

msgid ", in %q\n"

msgstr ", dans %q\n"

#: py/objcomplex.c

msgid "0.0 to a complex power"

msgstr "0.0 à une puissance complexe"

#: py/modbuiltins.c

msgid "3-arg pow() not supported"

msgstr "pow() non supporté avec 3 arguments"

#: ports/atmel-samd/common-hal/countio/Counter.c

#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c

msgid "A hardware interrupt channel is already in use"

msgstr "Un canal d'interruptions matérielles est déjà utilisé"

#: ports/esp32s2/common-hal/analogio/AnalogIn.c

msgid "ADC2 is being used by WiFi"

msgstr "ADC2 est utilisé pars le Wifi"

#: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c

#, c-format

msgid "Address must be %d bytes long"

msgstr "L'adresse doit être longue de %d octets"

#: shared-bindings/_bleio/Address.c

msgid "Address type out of range"

msgstr "Type d'adresse hors plage"

#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c

msgid "All I2C peripherals are in use"

msgstr "Tous les périphériques I2C sont utilisés"

#: ports/atmel-samd/common-hal/canio/Listener.c

#: ports/stm/common-hal/canio/Listener.c

msgid "All RX FIFOs in use"

msgstr "Tout les RX FIFOs sont utilisé"

#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c

msgid "All SPI peripherals are in use"

msgstr "Tous les périphériques SPI sont utilisés"

#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c

msgid "All UART peripherals are in use"

msgstr "Tous les périphériques UART sont utilisés"

#: ports/atmel-samd/common-hal/audioio/AudioOut.c

msgid "All event channels in use"

msgstr "Tous les canaux d'événements sont utilisés"

#: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c

msgid "All sync event channels in use"

msgstr "Tous les canaux d'événements de synchro sont utilisés"

#: shared-bindings/pwmio/PWMOut.c

msgid "All timers for this pin are in use"

msgstr "Tous les timers pour cette broche sont utilisés"

#: ports/atmel-samd/common-hal/_pew/PewPew.c

#: ports/atmel-samd/common-hal/audioio/AudioOut.c

#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c

#: ports/atmel-samd/common-hal/pulseio/PulseIn.c

#: ports/atmel-samd/common-hal/pulseio/PulseOut.c

#: ports/cxd56/common-hal/pulseio/PulseOut.c

#: ports/esp32s2/common-hal/neopixel_write/__init__.c

#: ports/esp32s2/common-hal/pulseio/PulseIn.c

#: ports/esp32s2/common-hal/pulseio/PulseOut.c

#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c

#: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c

#: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c

msgid "All timers in use"

msgstr "Tous les timers sont utilisés"

#: ports/nrf/common-hal/_bleio/Adapter.c

msgid "Already advertising."

msgstr "S'annonce déjà."

#: ports/atmel-samd/common-hal/canio/Listener.c

msgid "Already have all-matches listener"

msgstr ""

#: shared-module/memorymonitor/AllocationAlarm.c

#: shared-module/memorymonitor/AllocationSize.c

msgid "Already running"

msgstr "Déjà en cours d'exécution"

#: ports/esp32s2/common-hal/wifi/Radio.c

msgid "Already scanning for wifi networks"

msgstr ""

#: ports/cxd56/common-hal/analogio/AnalogIn.c

msgid "AnalogIn not supported on given pin"

msgstr "'AnalogOut' n'est pas supporté sur la broche indiquée"

#: ports/cxd56/common-hal/analogio/AnalogOut.c

#: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c

#: ports/nrf/common-hal/analogio/AnalogOut.c

msgid "AnalogOut functionality not supported"

msgstr "Fonctionnalité AnalogOut non supportée"

#: shared-bindings/analogio/AnalogOut.c

msgid "AnalogOut is only 16 bits. Value must be less than 65536."

msgstr ""

"AnalogOut est seulement 16 bits. Les valeurs doivent être inf. à 65536."

#: ports/atmel-samd/common-hal/analogio/AnalogOut.c

msgid "AnalogOut not supported on given pin"

msgstr "'AnalogOut' n'est pas supporté sur la broche indiquée"

#: ports/atmel-samd/common-hal/pulseio/PulseOut.c

#: ports/cxd56/common-hal/pulseio/PulseOut.c

msgid "Another send is already active"

msgstr "Un autre envoi est déjà actif"

#: shared-bindings/pulseio/PulseOut.c

msgid "Array must contain halfwords (type 'H')"

msgstr "Le tableau doit contenir des demi-mots (type 'H')"

#: shared-bindings/nvm/ByteArray.c

msgid "Array values should be single bytes."

msgstr "Les valeurs du tableau doivent être des octets simples 'bytes'."

#: shared-bindings/microcontroller/Pin.c

msgid "At most %d %q may be specified (not %d)"

msgstr "Au plus %d %q peut être spécifié (pas %d)"

#: shared-module/memorymonitor/AllocationAlarm.c

#, c-format

msgid "Attempt to allocate %d blocks"

msgstr "Tentative d'allocation de %d blocs"

#: supervisor/shared/safe_mode.c

msgid "Attempted heap allocation when MicroPython VM not running."

msgstr ""

"Tentative d'allocation de segments lorsque la machine virtuelle MicroPython "

"n'est pas en cours d'exécution."

#: shared-bindings/wifi/Radio.c

msgid "Authentication failure"

msgstr "Échec d'authentification"

#: main.c

msgid "Auto-reload is off.\n"

msgstr "L'auto-chargement est désactivé.\n"

#: main.c

msgid ""

"Auto-reload is on. Simply save files over USB to run them or enter REPL to "

"disable.\n"

msgstr ""

"Auto-chargement activé. Copiez simplement les fichiers en USB pour les "

"lancer ou entrez sur REPL pour le désactiver.\n"

#: shared-module/displayio/Display.c

#: shared-module/framebufferio/FramebufferDisplay.c

msgid "Below minimum frame rate"

msgstr "Inférieur à la fréquence d'images minimale"

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c

msgid "Bit clock and word select must share a clock unit"

msgstr "'bit clock' et 'word select' doivent partager une horloge"

#: shared-bindings/audiobusio/PDMIn.c

msgid "Bit depth must be multiple of 8."

msgstr "La profondeur de bit doit être un multiple de 8."

#: ports/mimxrt10xx/common-hal/busio/UART.c

msgid "Both RX and TX required for flow control"

msgstr "RX et TX requis pour le contrôle de flux"

#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c

msgid "Both pins must support hardware interrupts"

msgstr "Les deux entrées doivent supporter les interruptions matérielles"

#: shared-bindings/displayio/Display.c

#: shared-bindings/framebufferio/FramebufferDisplay.c

#: shared-bindings/rgbmatrix/RGBMatrix.c

msgid "Brightness must be 0-1.0"

msgstr "La luminosité doit être de 0 à 1.0"

#: shared-bindings/supervisor/__init__.c

msgid "Brightness must be between 0 and 255"

msgstr "La luminosité doit être entre 0 et 255"

#: shared-bindings/displayio/Display.c

#: shared-bindings/framebufferio/FramebufferDisplay.c

msgid "Brightness not adjustable"

msgstr "Luminosité non-ajustable"

#: shared-bindings/_bleio/UUID.c

#, c-format

msgid "Buffer + offset too small %d %d %d"

msgstr "Tampon + décalage trop petit %d %d %d"

#: shared-module/usb_hid/Device.c

#, c-format

msgid "Buffer incorrect size. Should be %d bytes."

msgstr "Tampon de taille incorrect. Devrait être de %d octets."

#: shared-bindings/displayio/Display.c

#: shared-bindings/framebufferio/FramebufferDisplay.c

msgid "Buffer is not a bytearray."

msgstr "Le tampon n'est pas un 'bytearray'."

#: ports/cxd56/common-hal/camera/Camera.c shared-bindings/displayio/Display.c

#: shared-bindings/framebufferio/FramebufferDisplay.c

msgid "Buffer is too small"

msgstr "Le tampon est trop petit"

#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c

#, c-format

msgid "Buffer length %d too big. It must be less than %d"

msgstr "La longueur du tampon %d est trop grande. Il doit être inférieur à %d"

#: ports/atmel-samd/common-hal/sdioio/SDCard.c

#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c

msgid "Buffer length must be a multiple of 512"

msgstr "La longueur de la mémoire tampon doit être un multiple de 512"

#: ports/stm/common-hal/sdioio/SDCard.c

msgid "Buffer must be a multiple of 512 bytes"

msgstr "La mémoire tampon doit être un multiple de 512"

#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c

msgid "Buffer must be at least length 1"

msgstr "Le tampon doit être de longueur au moins 1"

#: ports/nrf/common-hal/_bleio/PacketBuffer.c

msgid "Buffer too large and unable to allocate"

msgstr "Tampon trop volumineux et impossible à allouer"

#: shared-bindings/_bleio/PacketBuffer.c

#, c-format

msgid "Buffer too short by %d bytes"

msgstr "Tampon trop court de %d octets"

#: ports/atmel-samd/common-hal/displayio/ParallelBus.c

#: ports/nrf/common-hal/displayio/ParallelBus.c

#, c-format

msgid "Bus pin %d is already in use"

msgstr "La broche %d du bus est déjà utilisée"

#: shared-bindings/_bleio/UUID.c

msgid "Byte buffer must be 16 bytes."

msgstr "Le tampon doit être de 16 octets."

#: shared-bindings/nvm/ByteArray.c

msgid "Bytes must be between 0 and 255."

msgstr "Les octets 'bytes' doivent être entre 0 et 255."

#: shared-bindings/aesio/aes.c

msgid "CBC blocks must be multiples of 16 bytes"

msgstr "Les blocs CBC doivent être des multiples de 16 octets"

#: py/objtype.c

msgid "Call super().__init__() before accessing native object."

msgstr "Appelez super () .__ init __ () avant d'accéder à l'objet natif."

#: ports/nrf/common-hal/_bleio/Characteristic.c

msgid "Can't set CCCD on local Characteristic"

msgstr "Impossible de définir CCCD sur une caractéristique locale"

#: shared-bindings/_bleio/Adapter.c

msgid "Cannot create a new Adapter; use _bleio.adapter;"

msgstr ""

"Un nouveau Adapter ne peut être créé ; Adapter; utilisez _bleio.adapter;"

#: shared-bindings/displayio/Bitmap.c

#: shared-bindings/memorymonitor/AllocationSize.c

#: shared-bindings/pulseio/PulseIn.c

msgid "Cannot delete values"

msgstr "Impossible de supprimer les valeurs"

#: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c

#: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c

#: ports/nrf/common-hal/digitalio/DigitalInOut.c

msgid "Cannot get pull while in output mode"

msgstr "Ne peut être tiré ('pull') en mode 'output'"

#: ports/nrf/common-hal/microcontroller/Processor.c

msgid "Cannot get temperature"

msgstr "Impossible de lire la température"

#: shared-bindings/_bleio/Adapter.c

msgid "Cannot have scan responses for extended, connectable advertisements."

msgstr ""

"Impossible d'avoir des réponses d'analyse pour les publicités étendues et "

"connectables."

#: ports/atmel-samd/common-hal/audioio/AudioOut.c

msgid "Cannot output both channels on the same pin"

msgstr "Les 2 canaux de sortie ne peuvent être sur la même broche"

#: shared-module/bitbangio/SPI.c

msgid "Cannot read without MISO pin."

msgstr "Impossible de lire sans broche MISO."

#: shared-bindings/audiobusio/PDMIn.c

msgid "Cannot record to a file"

msgstr "Impossible d'enregistrer vers un fichier"

#: shared-module/storage/__init__.c

msgid "Cannot remount '/' when USB is active."

msgstr "'/' ne peut être remonté quand l'USB est actif."

#: ports/atmel-samd/common-hal/microcontroller/__init__.c

#: ports/cxd56/common-hal/microcontroller/__init__.c

#: ports/mimxrt10xx/common-hal/microcontroller/__init__.c

msgid "Cannot reset into bootloader because no bootloader is present."

msgstr ""

"Ne peut être redémarré vers le bootloader car il n'y a pas de bootloader."

#: shared-bindings/digitalio/DigitalInOut.c

msgid "Cannot set value when direction is input."

msgstr "Impossible d'affecter une valeur quand la direction est 'input'."

#: ports/esp32s2/common-hal/busio/UART.c

#: ports/mimxrt10xx/common-hal/busio/UART.c

msgid "Cannot specify RTS or CTS in RS485 mode"

msgstr "Impossible de spécifier RTS ou CTS en mode RS485"

#: py/objslice.c

msgid "Cannot subclass slice"

msgstr "On ne peut faire de sous-classes de tranches"

#: shared-module/bitbangio/SPI.c

msgid "Cannot transfer without MOSI and MISO pins."

msgstr "Pas de transfert sans broches MOSI et MISO."

#: extmod/moductypes.c

msgid "Cannot unambiguously get sizeof scalar"

msgstr "Impossible d'obtenir la taille du scalaire sans ambigüité"

#: ports/stm/common-hal/pwmio/PWMOut.c

msgid "Cannot vary frequency on a timer that is already in use"

msgstr ""

"Impossible de faire varier la fréquence sur une minuterie déjà utilisée"

#: shared-module/bitbangio/SPI.c

msgid "Cannot write without MOSI pin."

msgstr "Impossible d'écrire sans broche MOSI."

#: shared-bindings/_bleio/CharacteristicBuffer.c

msgid "CharacteristicBuffer writing not provided"

msgstr "Ecriture sur 'CharacteristicBuffer' non fournie"

#: supervisor/shared/safe_mode.c

msgid "CircuitPython core code crashed hard. Whoops!\n"

msgstr "Le code principal de CircuitPython s'est écrasé durement. Oups !\n"

#: supervisor/shared/safe_mode.c

msgid ""

"CircuitPython is in safe mode because you pressed the reset button during "

"boot. Press again to exit safe mode.\n"

msgstr ""

"CircuitPython est en mode sans échec car vous avez appuyé sur le bouton de "

"réinitialisation pendant le démarrage. Appuyez à nouveau pour quitter le "

"mode sans échec.\n"

#: supervisor/shared/safe_mode.c

msgid "CircuitPython was unable to allocate the heap.\n"

msgstr "CircuitPython n'as pu faire l'allocation de la pile\n"

#: shared-module/bitbangio/SPI.c

msgid "Clock pin init failed."

msgstr "Echec de l'init. de la broche d'horloge."

#: shared-module/bitbangio/I2C.c

msgid "Clock stretch too long"

msgstr "Période de l'horloge trop longue"

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c

msgid "Clock unit in use"

msgstr "Horloge en cours d'utilisation"

#: shared-bindings/_pew/PewPew.c

msgid "Column entry must be digitalio.DigitalInOut"

msgstr "L'entrée 'Column' doit être un digitalio.DigitalInOut"

#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c

#: shared-bindings/displayio/ParallelBus.c

msgid "Command must be an int between 0 and 255"

msgstr "La commande doit être un entier entre 0 et 255"

#: shared-bindings/_bleio/Connection.c

msgid ""

"Connection has been disconnected and can no longer be used. Create a new "

"connection."

msgstr ""

"La connexion a été déconnectée et ne peut plus être utilisée. Créez une "

"nouvelle connexion."

#: py/persistentcode.c

msgid "Corrupt .mpy file"

msgstr "Fichier .mpy corrompu"

#: py/emitglue.c

msgid "Corrupt raw code"

msgstr "Code brut corrompu"

#: ports/cxd56/common-hal/camera/Camera.c

msgid "Could not initialize Camera"

msgstr "Impossible d'initialisé la Camera"

#: ports/cxd56/common-hal/gnss/GNSS.c

msgid "Could not initialize GNSS"

msgstr "Impossible d'initialiser GNSS"

#: ports/cxd56/common-hal/sdioio/SDCard.c

msgid "Could not initialize SDCard"

msgstr "Impossible d'initialiser la carte SD"

#: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c

#: ports/esp32s2/common-hal/busio/UART.c

msgid "Could not initialize UART"

msgstr "L'UART n'a pu être initialisé"

#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c

msgid "Could not initialize channel"

msgstr "Impossible d'initialiser la chaîne"

#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c

msgid "Could not initialize timer"

msgstr "Impossible d'initialiser la minuterie"

#: ports/stm/common-hal/pwmio/PWMOut.c

msgid "Could not re-init channel"

msgstr "Impossible de réinitialiser la chaîne"

#: ports/stm/common-hal/pwmio/PWMOut.c

msgid "Could not re-init timer"

msgstr "Impossible de réinitialiser le minuteur"

#: ports/stm/common-hal/pwmio/PWMOut.c

msgid "Could not restart PWM"

msgstr "Impossible de redémarrer PWM"

#: ports/esp32s2/common-hal/neopixel_write/__init__.c

msgid "Could not retrieve clock"

msgstr ""

#: shared-bindings/_bleio/Adapter.c

msgid "Could not set address"

msgstr ""

#: ports/stm/common-hal/pwmio/PWMOut.c

msgid "Could not start PWM"

msgstr "Impossible de démarrer PWM"

#: ports/stm/common-hal/busio/UART.c

msgid "Could not start interrupt, RX busy"

msgstr "Impossible de démarrer l'interruption, RX occupé"

#: shared-module/audiomp3/MP3Decoder.c

msgid "Couldn't allocate decoder"

msgstr "Impossible d'allouer le décodeur"

#: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c

#: shared-module/audiomp3/MP3Decoder.c

msgid "Couldn't allocate first buffer"

msgstr "Impossible d'allouer le 1er tampon"

#: shared-module/audiomp3/MP3Decoder.c

msgid "Couldn't allocate input buffer"

msgstr "Impossible d'allouer le tampon d'entrée"

#: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c

#: shared-module/audiomp3/MP3Decoder.c

msgid "Couldn't allocate second buffer"

msgstr "Impossible d'allouer le 2e tampon"

#: supervisor/shared/safe_mode.c

msgid "Crash into the HardFault_Handler."

msgstr "Crash dans le HardFault_Handler."

#: ports/stm/common-hal/analogio/AnalogOut.c

msgid "DAC Channel Init Error"

msgstr "Erreur d'initialisation du canal DAC"

#: ports/stm/common-hal/analogio/AnalogOut.c

msgid "DAC Device Init Error"

msgstr "Erreur d'initialisation du périphérique DAC"

#: ports/atmel-samd/common-hal/audioio/AudioOut.c

msgid "DAC already in use"

msgstr "DAC déjà utilisé"

#: ports/atmel-samd/common-hal/displayio/ParallelBus.c

#: ports/nrf/common-hal/displayio/ParallelBus.c

msgid "Data 0 pin must be byte aligned"

msgstr "La broche 'Data 0' doit être aligné sur l'octet"

#: shared-module/audiocore/WaveFile.c

msgid "Data chunk must follow fmt chunk"

msgstr "Un bloc de données doit suivre un bloc de format"

#: ports/nrf/common-hal/_bleio/Adapter.c

msgid "Data too large for advertisement packet"

msgstr "Données trop volumineuses pour un paquet de diffusion"

#: shared-bindings/audiobusio/PDMIn.c

msgid "Destination capacity is smaller than destination_length."

msgstr "La capacité de destination est plus petite que 'destination_length'."

#: ports/nrf/common-hal/audiobusio/I2SOut.c

msgid "Device in use"

msgstr "Appareil utilisé"

#: ports/cxd56/common-hal/digitalio/DigitalInOut.c

msgid "DigitalInOut not supported on given pin"

msgstr "DigitalInOut non pris en charge sur la broche donnée"

#: shared-bindings/displayio/Display.c

#: shared-bindings/framebufferio/FramebufferDisplay.c

msgid "Display must have a 16 bit colorspace."

msgstr "L'affichage doit avoir un espace colorimétrique de 16 bits."

#: shared-bindings/displayio/Display.c

#: shared-bindings/displayio/EPaperDisplay.c

#: shared-bindings/framebufferio/FramebufferDisplay.c

msgid "Display rotation must be in 90 degree increments"

msgstr "La rotation d'affichage doit se faire par incréments de 90 degrés"

#: shared-bindings/digitalio/DigitalInOut.c

msgid "Drive mode not used when direction is input."

msgstr "Le mode Drive n'est pas utilisé quand la direction est 'input'."

#: shared-bindings/aesio/aes.c

msgid "ECB only operates on 16 bytes at a time"

msgstr "La BCE ne fonctionne que sur 16 octets à la fois"

#: ports/esp32s2/common-hal/busio/SPI.c

msgid "ESP-IDF memory allocation failed"

msgstr "ESP-IDF échec d'allocation de la mémoire"

#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c

#: ports/atmel-samd/common-hal/ps2io/Ps2.c

#: ports/atmel-samd/common-hal/pulseio/PulseIn.c

#: ports/cxd56/common-hal/pulseio/PulseIn.c

msgid "EXTINT channel already in use"

msgstr "Canal EXTINT déjà utilisé"

#: extmod/modure.c

msgid "Error in regex"

msgstr "Erreur dans l'expression régulière"

#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c

#: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c

#: shared-bindings/neopixel_write/__init__.c

#: shared-bindings/terminalio/Terminal.c

msgid "Expected a %q"

msgstr "Attendu un %q"

#: shared-bindings/_bleio/CharacteristicBuffer.c

#: shared-bindings/_bleio/Descriptor.c shared-bindings/_bleio/PacketBuffer.c

msgid "Expected a Characteristic"

msgstr "Une 'Characteristic' est attendue"

#: shared-bindings/_bleio/Adapter.c

msgid "Expected a DigitalInOut"

msgstr "Un 'DigitalInOut' est attendu"

#: shared-bindings/_bleio/Characteristic.c

msgid "Expected a Service"

msgstr "Attendu un service"

#: shared-bindings/_bleio/Adapter.c

msgid "Expected a UART"

msgstr "Un 'UART' est attendu"

#: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c

#: shared-bindings/_bleio/Service.c

msgid "Expected a UUID"

msgstr "Un UUID est attendu"

#: shared-bindings/_bleio/Adapter.c

msgid "Expected an Address"

msgstr "Attendu une adresse"

#: shared-module/_pixelbuf/PixelBuf.c

#, c-format

msgid "Expected tuple of length %d, got %d"

msgstr "Tuple de longueur %d attendu, obtenu %d"

#: ports/nrf/common-hal/_bleio/Adapter.c

msgid "Extended advertisements with scan response not supported."

msgstr ""

"Les publicités étendues avec réponse d'analyse ne sont pas prises en charge."

#: extmod/ulab/code/fft/fft.c

msgid "FFT is defined for ndarrays only"

msgstr "La FFT est définie pour les ndarrays uniquement"

#: ports/esp32s2/common-hal/socketpool/Socket.c

msgid "Failed SSL handshake"

msgstr ""

#: shared-bindings/ps2io/Ps2.c

msgid "Failed sending command."

msgstr "Échec de l'envoi de la commande."

#: ports/nrf/sd_mutex.c

#, c-format

msgid "Failed to acquire mutex, err 0x%04x"

msgstr "Echec de l'obtention de mutex, err 0x%04x"

#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c

msgid "Failed to allocate RX buffer"

msgstr "Echec de l'allocation du tampon RX"

#: ports/atmel-samd/common-hal/busio/UART.c

#: ports/atmel-samd/common-hal/pulseio/PulseIn.c

#: ports/cxd56/common-hal/pulseio/PulseIn.c

#: ports/esp32s2/common-hal/pulseio/PulseIn.c

#: ports/nrf/common-hal/pulseio/PulseIn.c

#: ports/stm/common-hal/pulseio/PulseIn.c

#, c-format

msgid "Failed to allocate RX buffer of %d bytes"

msgstr "Echec de l'allocation de %d octets du tampon RX"

#: ports/esp32s2/common-hal/wifi/__init__.c

msgid "Failed to allocate Wifi memory"

msgstr ""

#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c

msgid "Failed to allocate wifi scan memory"

msgstr ""

#: ports/nrf/common-hal/_bleio/Adapter.c

msgid "Failed to connect: internal error"

msgstr "Impossible de se connecter : erreur interne"

#: ports/nrf/common-hal/_bleio/Adapter.c

msgid "Failed to connect: timeout"

msgstr "Impossible de se connecter : délai d'expiration"

#: ports/esp32s2/common-hal/wifi/__init__.c

msgid "Failed to init wifi"

msgstr "Echec de l'initialisation du Wifi"

#: shared-module/audiomp3/MP3Decoder.c

msgid "Failed to parse MP3 file"

msgstr "Impossible d'analyser le fichier MP3"

#: ports/nrf/sd_mutex.c

#, c-format

msgid "Failed to release mutex, err 0x%04x"

msgstr "Impossible de libérer mutex, err 0x%04x"

#: supervisor/shared/safe_mode.c

msgid "Failed to write internal flash."

msgstr "Échec de l'écriture du flash interne."

#: py/moduerrno.c

msgid "File exists"

msgstr "Le fichier existe"

#: ports/atmel-samd/common-hal/canio/Listener.c

#: ports/stm/common-hal/canio/Listener.c

msgid "Filters too complex"

msgstr ""

#: ports/cxd56/common-hal/camera/Camera.c

msgid "Format not supported"

msgstr ""

#: shared-module/framebufferio/FramebufferDisplay.c

#, c-format

msgid "Framebuffer requires %d bytes"

msgstr ""

#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c

msgid "Frequency captured is above capability. Capture Paused."

msgstr "La fréquence capturée est au delà des capacités. Capture en pause."

#: ports/stm/common-hal/pwmio/PWMOut.c

msgid "Frequency must match existing PWMOut using this timer"

msgstr ""

"La fréquence doit correspondre à PWMOut existant à l'aide de cette minuterie"

#: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c

#: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c

msgid "Function requires lock"

msgstr "La fonction nécessite un verrou"

#: shared-bindings/displayio/Display.c

#: shared-bindings/displayio/EPaperDisplay.c

#: shared-bindings/framebufferio/FramebufferDisplay.c

msgid "Group already used"

msgstr "Groupe déjà utilisé"

#: shared-module/displayio/Group.c

msgid "Group full"

msgstr "Groupe plein"

#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c

#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c

#: ports/stm/common-hal/sdioio/SDCard.c

msgid "Hardware busy, try alternative pins"

msgstr "Matériel occupé, essayez d'autres broches"

#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c

msgid "Hardware in use, try alternative pins"

msgstr "Matériel utilisé, essayez d'autres broches"

#: extmod/vfs_posix_file.c py/objstringio.c

msgid "I/O operation on closed file"

msgstr "opération d'E/S sur un fichier fermé"

#: ports/stm/common-hal/busio/I2C.c

msgid "I2C Init Error"

msgstr "Erreur d'initialisation I2C"

#: shared-bindings/audiobusio/I2SOut.c

msgid "I2SOut not available"

msgstr "I2SOut n'est pas disponible"

#: shared-bindings/aesio/aes.c

#, c-format

msgid "IV must be %d bytes long"

msgstr "IV doit être long de %d octets"

#: py/persistentcode.c

msgid ""

"Incompatible .mpy file. Please update all .mpy files. See http://adafru.it/"

"mpy-update for more info."

msgstr ""

"Fichier .mpy incompatible. Merci de mettre à jour tous les fichiers .mpy."

"Voir http://adafru.it/mpy-update pour plus d'informations."

#: shared-bindings/_pew/PewPew.c