From f3dac5977c79a0748ce34137283152a589147858 Mon Sep 17 00:00:00 2001 From: olprod Date: Thu, 13 Aug 2026 11:42:55 -0700 Subject: [PATCH 1/7] Localized file check-in by OneLocBuild Task: Build definition ID 13420: Build ID 2675493 --- .../resources/cs/ProcessResources.cs.resx | 70 +++++++++--------- .../resources/cs/AddMember.cs.resx | 26 +++---- .../CommandLineParameterParserStrings.cs.resx | 6 +- .../CommandLineParameterParserStrings.de.resx | 6 +- .../CommandLineParameterParserStrings.es.resx | 6 +- .../CommandLineParameterParserStrings.fr.resx | 6 +- .../CommandLineParameterParserStrings.it.resx | 6 +- .../CommandLineParameterParserStrings.ja.resx | 6 +- .../CommandLineParameterParserStrings.ko.resx | 6 +- .../CommandLineParameterParserStrings.pl.resx | 6 +- ...mmandLineParameterParserStrings.pt-BR.resx | 6 +- .../CommandLineParameterParserStrings.ru.resx | 6 +- .../CommandLineParameterParserStrings.tr.resx | 6 +- ...andLineParameterParserStrings.zh-Hans.resx | 6 +- ...andLineParameterParserStrings.zh-Hant.resx | 6 +- .../cs/RemotingErrorIdStrings.cs.resx | 48 ++++++------ .../resources/cs/RunspaceInit.cs.resx | 74 +++++++++---------- 17 files changed, 148 insertions(+), 148 deletions(-) diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/cs/ProcessResources.cs.resx b/src/Microsoft.PowerShell.Commands.Management/resources/cs/ProcessResources.cs.resx index f22605b5b5b..4be98442a52 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/cs/ProcessResources.cs.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/cs/ProcessResources.cs.resx @@ -118,19 +118,19 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot find a process with the name "{0}". Verify the process name and call the cmdlet again. + Nelze najít proces s názvem {0}. Ověřte název procesu a znovu zavolejte rutinu. - Cannot find a process with the name "{0}". Try running with -Id to search by Id of processes. + Nelze najít proces s názvem {0}. Zkuste procesy vyhledat podle ID spuštěním příkazu s parametrem -Id. - This command cannot be run because the debugger cannot be attached to the process "{0} ({1})". Specify another process and Run your command. + Tento příkaz nelze spustit, protože ladicí program nelze připojit k procesu {0} ({1}). Zadejte jiný proces a spusťte příkaz. - Cannot find a process with the process identifier {1}. + Nelze najít proces s identifikátorem procesu {1}. - Cannot stop process "{0} ({1})" because of the following error: {2} + Proces {0} ({1}) nelze zastavit kvůli následující chybě: {2} {0} ({1}) @@ -139,96 +139,96 @@ {0} {1} - Cannot enumerate the modules of the "{0}" process. + Nelze vytvořit výčet modulů procesu {0}. - Cannot enumerate the file version information of the "{0}" process. + Nelze vytvořit výčet informací o verzi souboru procesu {0}. - Cannot enumerate the modules and the file version information of the "{0}" process. + Nelze vytvořit výčet modulů a informací o verzi souboru procesu {0}. - Are you sure you want to perform the Stop-Process operation on the following item: {0}({1})? + Opravdu chcete provést operaci Stop-Process u následující položky: {0}({1})? - The specified path is not a valid win32 application. Try again with the UseShellExecute. + Zadaná cesta není platná aplikace win32. Zkuste to znovu s UseShellExecute. - This command stopped operation of "{0} ({1})" because of the following error: {2}. + Tento příkaz zastavil operaci s procesem {0} ({1}) kvůli následující chybě: {2}. - This command cannot be run because Redirection parameters cannot be used with UseShellExecute parameter + Tento příkaz nelze spustit, protože parametry Redirection nelze použít s parametrem UseShellExecute. - Exception getting "Modules" or "FileVersion": "This feature is not supported for remote computers.". + Došlo k výjimce při získávání Modules nebo FileVersion: Tato funkce není podporována pro vzdálené počítače. - This command cannot attach the debugger to the process due to {0} because no default debugger is available. + Tento příkaz nemůže připojit ladicí program k procesu kvůli {0}, protože není k dispozici žádný výchozí ladicí program. - This command stopped operation because it cannot wait on 'System Idle' process. Specify another process and Run your command again. + Tento příkaz zastavil operaci, protože nemůže čekat na proces System Idle. Zadejte jiný proces a spusťte příkaz znovu. - This command stopped operation because it cannot wait on itself. Specify another process and Run your command again. + Tento příkaz zastavil operaci, protože nemůže čekat sám na sebe. Zadejte jiný proces a spusťte příkaz znovu. - This command stopped operation because process "{0} ({1})" is not stopped in the specified time-out. + Tento příkaz zastavil operaci, protože proces {0} ({1}) není v zadaném časovém limitu zastaven. - This command cannot be run due to the error: {0} + Tento příkaz nelze spustit kvůli následující chybě: {0}. - This command cannot be run because the input "{0}" is not a valid Application. Give a valid application and run your command again. + Tento příkaz nelze spustit, protože vstup {0} není platná aplikace. Zadejte platnou aplikaci a spusťte příkaz znovu. - This command cannot be run because either the parameter "{0}" has a value that is not valid or cannot be used with this command. Give a valid input and Run your command again. + Tento příkaz nelze spustit, protože parametr {0} má neplatnou hodnotu nebo jej nelze použít s tímto příkazem. Zadejte platný vstup a spusťte příkaz znovu. - This command cannot be run because "{0}" and "{1}" are same. Give different inputs and Run your command again. + Tento příkaz nelze spustit, protože {0} a {1} jsou stejné. Zadejte jiné vstupy a spusťte příkaz znovu. - This command cannot be run completely because the system cannot find all the information required. + Tento příkaz nelze spustit úplně, protože systém nemůže najít všechny požadované informace. - Failed to retrieve the new process handle: "{0}". The Process object outputted may have some properties and methods that do not work properly. + Nepodařilo se načíst nový popisovač procesu: {0}. Výstupní objekt Process může obsahovat některé vlastnosti a metody, které nefungují správně. - This command cannot be run due to error 1783. The possible cause of this error can be using of a non-existing user "{0}". Please give a valid user and run your command again. + Tento příkaz nejde spustit kvůli chybě 1783. Možnou příčinou této chyby může být použití neexistující uživatele {0}. Zadejte platného uživatele a spusťte příkaz znovu. - Error adding '{0}' to the network: {1} + Chyba při přidávání položky {0} do sítě: {1} - Error removing '{0}' from the network: {1} + Chyba při odebírání položky {0} ze sítě: {1} - Error renaming '{0}': {1} + Chyba při přejmenovávání {0}: {1} - Parameters "{0}" and "{1}" cannot be specified at the same time. + Parametry {0} a {1} nelze zadat současně. - Cannot debug process "{0} ({1})" because of the following error: {2} + Proces {0} ({1}) nelze ladit kvůli následující chybě: {2}. Uživatel nemá přístup k požadovaným informacím. - The specified parameter is not valid. + Zadaný parametr není platný. - The user does not have sufficient privilege. + Uživatel nemá dostatečná oprávnění. - Unknown failure. + Došlo k neznámé chybě. - The path specified does not exist. + Zadaná cesta neexistuje. - The parameter '{0}' is not supported for the cmdlet '{1}' on this edition of Windows. + Parametr {0} není v této edici Windows pro rutinu {1} podporován. - The parameter '{0}' is not supported for the cmdlet '{1}' on this edition of PowerShell. + Parametr {0} není pro rutinu {1} v této edici PowerShellu podporován. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/cs/AddMember.cs.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/cs/AddMember.cs.resx index e7ce64965ab..e619ca3b51c 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/cs/AddMember.cs.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/cs/AddMember.cs.resx @@ -118,42 +118,42 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - To add a member, only one member type can be specified. The member types specified are: "{0}" + Chcete-li přidat člen, lze zadat pouze jeden typ členu. Zadané typy členů jsou: {0} - Cannot add a member with type "{0}". Specify a different type for the MemberTypes parameter. + Nelze přidat člen s typem {0}. Pro parametr MemberTypes zadejte jiný typ. - The SecondValue parameter is not necessary for a member of type "{0}", and should not be specified. Do not specify the SecondValue parameter when you add members of this type. + Parametr SecondValue není pro člen typu {0} vyžadován a neměl by být zadán. Při přidávání členů tohoto typu parametr SecondValue nezadávejte. - The Value parameter is required for a member of type "{0}". Specify the Value parameter when adding members of this type. + Pro členy typu {0} je parametr Value povinný. Při přidávání členů tohoto typu zadejte parametr Value. - Both Value and SecondValue parameters should not be null for a member of type "{0}". Specify a non-null value for one of the two parameters. + Pro člen typu {0} nesmí mít oba parametry Value a SecondValue hodnotu null. Zadejte pro jeden z těchto dvou parametrů hodnotu, která není null. - Cannot add a member with the name "{0}" because a member with that name already exists. To overwrite the member anyway, add the Force parameter to your command. + Člen s názvem {0} se nedá přidat, protože člen s tímto názvem již existuje. Pokud chcete člen přesto přepsat, přidejte do příkazu parametr Force. - Cannot force the member with name "{0}" and type "{1}" to be added. A member with that name and type already exists, and the existing member is not an instance extension. + Nelze vynutit přidání členu s názvem {0} a typem {1}. Člen s tímto názvem a typem již existuje a stávající člen není rozšířením instance. - The member referenced by this alias should not be null or empty. + Člen, na který tento alias odkazuje, nesmí být null ani prázdný. - The Value parameter should not be null for a member of type "{0}". Specify a non-null value for the Value parameter when adding members of this type. + Parametr Value nesmí být pro člen typu {0} null. Při přidávání členů tohoto typu zadejte pro parametr Value hodnotu, která není null. - The SecondValue parameter should not be null for a member of type "{0}". Specify a non-null value for the SecondValue parameter when adding members of this type. + Parametr SecondValue nesmí být pro člen typu {0} null. Při přidávání členů tohoto typu zadejte pro parametr SecondValue hodnotu, která není null. - The parameter NotePropertyName cannot take values that could be converted to the type {0}. To define the name of a member with those values, use Add-Member, and specify the member type. + Parametr NotePropertyName nesmí obsahovat hodnoty, které lze převést na typ {0}. Chcete-li s těmito hodnotami definovat název členu, použijte Add-Member a zadejte typ členu. - The name for a NoteProperty member should not be null or an empty string. + Název členu NoteProperty nesmí být null ani prázdný řetězec. - The TypeName parameter should not be null, empty, or contain only white spaces. + Parametr TypeName nesmí být null, prázdný ani obsahovat pouze prázdné znaky. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/cs/CommandLineParameterParserStrings.cs.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/cs/CommandLineParameterParserStrings.cs.resx index 4e56f6dfd21..3741577008a 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/cs/CommandLineParameterParserStrings.cs.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/cs/CommandLineParameterParserStrings.cs.resx @@ -229,12 +229,12 @@ Platné formáty jsou: Pro parametr {0} je nutné zadat argument. - The parameter "-File" is required by policy. + Zásady vyžadují parametr „-File“. - The parameter "-NoExit" is disallowed by policy. + Zásady nepovolují parametr „-NoExit“. - Server mode is disallowed by policy. + Zásady zakazují režim serveru. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/de/CommandLineParameterParserStrings.de.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/de/CommandLineParameterParserStrings.de.resx index 5bbac3bf85b..1140299d023 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/de/CommandLineParameterParserStrings.de.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/de/CommandLineParameterParserStrings.de.resx @@ -229,12 +229,12 @@ Valid formats are: An argument is required to be supplied to the '{0}' parameter. - The parameter "-File" is required by policy. + Der Parameter „-File“ ist für die Richtlinie erforderlich. - The parameter "-NoExit" is disallowed by policy. + Der Parameter „-NoExit“ ist durch die Richtlinie nicht zulässig. - Server mode is disallowed by policy. + Der Servermodus ist durch die Richtlinie nicht zulässig. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/es/CommandLineParameterParserStrings.es.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/es/CommandLineParameterParserStrings.es.resx index 5bbac3bf85b..2a77ee14181 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/es/CommandLineParameterParserStrings.es.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/es/CommandLineParameterParserStrings.es.resx @@ -229,12 +229,12 @@ Valid formats are: An argument is required to be supplied to the '{0}' parameter. - The parameter "-File" is required by policy. + La directiva requiere el parámetro "-File". - The parameter "-NoExit" is disallowed by policy. + La directiva no permite el parámetro "-NoExit". - Server mode is disallowed by policy. + La directiva no permite el modo de servidor. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/fr/CommandLineParameterParserStrings.fr.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/fr/CommandLineParameterParserStrings.fr.resx index 5bbac3bf85b..604722b8eb8 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/fr/CommandLineParameterParserStrings.fr.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/fr/CommandLineParameterParserStrings.fr.resx @@ -229,12 +229,12 @@ Valid formats are: An argument is required to be supplied to the '{0}' parameter. - The parameter "-File" is required by policy. + Le paramètre « -File » est requis par la stratégie. - The parameter "-NoExit" is disallowed by policy. + Le paramètre « -NoExit » est interdit par la stratégie. - Server mode is disallowed by policy. + Le mode serveur est interdit par la stratégie. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/it/CommandLineParameterParserStrings.it.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/it/CommandLineParameterParserStrings.it.resx index 5bbac3bf85b..1fc9e289e9c 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/it/CommandLineParameterParserStrings.it.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/it/CommandLineParameterParserStrings.it.resx @@ -229,12 +229,12 @@ Valid formats are: An argument is required to be supplied to the '{0}' parameter. - The parameter "-File" is required by policy. + Il parametro "-File" è obbligatorio secondo i criteri. - The parameter "-NoExit" is disallowed by policy. + Il parametro "-NoExit" non è consentito dai criteri. - Server mode is disallowed by policy. + La modalità server non è consentita dai criteri. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/ja/CommandLineParameterParserStrings.ja.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/ja/CommandLineParameterParserStrings.ja.resx index 5bbac3bf85b..f12a6dac16d 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/ja/CommandLineParameterParserStrings.ja.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/ja/CommandLineParameterParserStrings.ja.resx @@ -229,12 +229,12 @@ Valid formats are: An argument is required to be supplied to the '{0}' parameter. - The parameter "-File" is required by policy. + パラメーター "-File" はポリシーで必要です。 - The parameter "-NoExit" is disallowed by policy. + パラメーター "-NoExit" はポリシーで許可されていません。 - Server mode is disallowed by policy. + サーバー モードはポリシーで許可されていません。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/ko/CommandLineParameterParserStrings.ko.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/ko/CommandLineParameterParserStrings.ko.resx index 318b74b70fc..769e9357371 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/ko/CommandLineParameterParserStrings.ko.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/ko/CommandLineParameterParserStrings.ko.resx @@ -229,12 +229,12 @@ '{0}' 매개 변수에 제공할 인수가 필요합니다. - The parameter "-File" is required by policy. + 정책상 매개 변수 "-File"이 필요합니다. - The parameter "-NoExit" is disallowed by policy. + 정책상 매개 변수 "-NoExit"를 사용할 수 없습니다. - Server mode is disallowed by policy. + 정책상 서버 모드는 사용할 수 없습니다. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/pl/CommandLineParameterParserStrings.pl.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/pl/CommandLineParameterParserStrings.pl.resx index 5bbac3bf85b..379742b55ef 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/pl/CommandLineParameterParserStrings.pl.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/pl/CommandLineParameterParserStrings.pl.resx @@ -229,12 +229,12 @@ Valid formats are: An argument is required to be supplied to the '{0}' parameter. - The parameter "-File" is required by policy. + Parametr „-File” jest wymagany przez zasady. - The parameter "-NoExit" is disallowed by policy. + Parametr „-NoExit” jest niedozwolony przez zasady. - Server mode is disallowed by policy. + Tryb serwera jest niedozwolony przez zasady. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/pt-BR/CommandLineParameterParserStrings.pt-BR.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/pt-BR/CommandLineParameterParserStrings.pt-BR.resx index 5bbac3bf85b..0d1e9e53f2e 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/pt-BR/CommandLineParameterParserStrings.pt-BR.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/pt-BR/CommandLineParameterParserStrings.pt-BR.resx @@ -229,12 +229,12 @@ Valid formats are: An argument is required to be supplied to the '{0}' parameter. - The parameter "-File" is required by policy. + O parâmetro "-File" é exigido pela política. - The parameter "-NoExit" is disallowed by policy. + O parâmetro "-NoExit" não é permitido pela política. - Server mode is disallowed by policy. + O modo de servidor não é permitido pela política. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/ru/CommandLineParameterParserStrings.ru.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/ru/CommandLineParameterParserStrings.ru.resx index 5bbac3bf85b..bd983e7f717 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/ru/CommandLineParameterParserStrings.ru.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/ru/CommandLineParameterParserStrings.ru.resx @@ -229,12 +229,12 @@ Valid formats are: An argument is required to be supplied to the '{0}' parameter. - The parameter "-File" is required by policy. + Параметр -File обязателен согласно политике. - The parameter "-NoExit" is disallowed by policy. + Параметр -NoExit запрещен политикой. - Server mode is disallowed by policy. + Режим сервера запрещен политикой. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/tr/CommandLineParameterParserStrings.tr.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/tr/CommandLineParameterParserStrings.tr.resx index 5bbac3bf85b..d1be6cc670b 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/tr/CommandLineParameterParserStrings.tr.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/tr/CommandLineParameterParserStrings.tr.resx @@ -229,12 +229,12 @@ Valid formats are: An argument is required to be supplied to the '{0}' parameter. - The parameter "-File" is required by policy. + "-File" parametresi ilke tarafından zorunlu kılınıyor. - The parameter "-NoExit" is disallowed by policy. + "-NoExit" parametresine ilke tarafından izin verilmiyor. - Server mode is disallowed by policy. + Sunucu moduna ilke tarafından izin verilmiyor. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hans/CommandLineParameterParserStrings.zh-Hans.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hans/CommandLineParameterParserStrings.zh-Hans.resx index 5bbac3bf85b..c5a6fc0882c 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hans/CommandLineParameterParserStrings.zh-Hans.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hans/CommandLineParameterParserStrings.zh-Hans.resx @@ -229,12 +229,12 @@ Valid formats are: An argument is required to be supplied to the '{0}' parameter. - The parameter "-File" is required by policy. + 策略需要参数 '-File'。 - The parameter "-NoExit" is disallowed by policy. + 策略不允许使用参数 '-NoExit'。 - Server mode is disallowed by policy. + 策略不允许服务器模式。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hant/CommandLineParameterParserStrings.zh-Hant.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hant/CommandLineParameterParserStrings.zh-Hant.resx index 5bbac3bf85b..c806dd64fab 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hant/CommandLineParameterParserStrings.zh-Hant.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hant/CommandLineParameterParserStrings.zh-Hant.resx @@ -229,12 +229,12 @@ Valid formats are: An argument is required to be supplied to the '{0}' parameter. - The parameter "-File" is required by policy. + 此原則需要參數 "-File"。 - The parameter "-NoExit" is disallowed by policy. + 此原則不允許參數 "-NoExit"。 - Server mode is disallowed by policy. + 此原則不允許伺服器模式。 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/cs/RemotingErrorIdStrings.cs.resx b/src/System.Management.Automation/resources/cs/RemotingErrorIdStrings.cs.resx index ffc292032d5..b0afdeaf659 100644 --- a/src/System.Management.Automation/resources/cs/RemotingErrorIdStrings.cs.resx +++ b/src/System.Management.Automation/resources/cs/RemotingErrorIdStrings.cs.resx @@ -549,7 +549,7 @@ Parametr {0} nelze zadat, pokud je zadán parametr {1}. - Wildcard characters are not supported for the FilePath parameter. Specify a path without wildcard characters. + Pro parametr FilePath nejsou podporovány zástupné znaky. Zadejte cestu bez zástupných znaků. Cesta zadaná jako hodnota parametru FilePath nepochází od zprostředkovatele FileSystem. @@ -612,7 +612,7 @@ Při použití následujícího typu přístupu k proxy serveru nelze zadat přihlašovací údaje proxy serveru: {0}. Buď zadejte jiný typ přístupu, nebo nezadávejte přihlašovací údaje proxy serveru. - A {0} value must be specified for session option {1}. + Pro možnost relace {1} je nutné zadat hodnotu {0}. Relace musí být otevřená. @@ -636,7 +636,7 @@ Enter-PSSession nelze spustit z vnořené výzvy. - The maximum number of WS-Man URI redirections to allow while connecting to a remote computer + Maximální počet přesměrování identifikátoru URI WS-Man, která se mají povolit při připojování ke vzdálenému počítači. Výchozí možnosti relace pro nové vzdálené relace @@ -846,7 +846,7 @@ Všimněte si, že Start-Job se záměrně nepodporuje ve scénářích, ve kter Parametry Wait a Keep nelze použít společně ve stejném příkazu. - The WriteEvents parameter cannot be used without the Wait parameter. + Parametr WriteEvents nelze použít bez parametru Wait. Správa verzí koncového bodu vzdálené komunikace PowerShellu se v PowerShellu 7+ nepodporuje. @@ -933,17 +933,17 @@ Všimněte si, že Start-Job se záměrně nepodporuje ve scénářích, ve kter Příkaz nemůže najít relaci PSSession s názvem {0}. - PowerShell remoting is not supported in the Windows Preinstallation Environment (WinPE). + Vzdálená komunikace PowerShellu není podporována v Předinstalačním prostředí systému Windows (Windows PE). - Changes made by {0} cannot take effect until the WinRM service is restarted. + Změny provedené {0} se projeví až po restartování služby WinRM. - {0} may need to restart the WinRM service if a configuration using this name has recently been unregistered, certain system data structures may still be cached. In that case, a restart of WinRM may be required. -All WinRM sessions connected to PowerShell session configurations, such as Microsoft.PowerShell and session configurations that are created with the Register-PSSessionConfiguration cmdlet, are disconnected. + Pokud byla konfigurace s tímto názvem nedávno zrušena, může být potřeba restartovat službu WinRM {0}, protože některé systémové datové struktury můžou být stále uložené v mezipaměti. V takovém případě může být nutné restartovat službu WinRM. +Všechny relace WinRM připojené ke konfiguracím relací PowerShellu, jako je Microsoft.PowerShell, a ke konfiguracím relací vytvořeným pomocí rutiny Register-PSSessionConfiguration budou odpojeny. - You are running in a remote session and have selected the Force option which means the WinRM service may restart.If the WinRM service restarts then this remote session will be terminated and you will need to create a new session to continue + Používáte vzdálenou relaci a vybrali jste možnost Vynutit, což znamená, že se služba WinRM může restartovat. Pokud se služba WinRM restartuje, tato vzdálená relace se ukončí a budete muset vytvořit novou relaci, abyste mohli pokračovat. Při pokusu o uložení identifikátorů měla úloha hodnotu null. Zadejte úlohu, aby bylo možné uložit její identifikátory. @@ -1145,7 +1145,7 @@ All WinRM sessions connected to PowerShell session configurations, such as Micro Při analýze konfiguračního souboru {0} došlo k chybě s následující zprávou: {1} - The -WriteJobInResults parameter cannot be used without the -Wait parameter + Parametr -WriteJobInResults nelze použít bez parametru -Wait. Člen {0} není absolutní cesta {1}. Změňte člena na absolutní cestu v souboru {2}. @@ -1465,52 +1465,52 @@ All WinRM sessions connected to PowerShell session configurations, such as Micro Zadaná vstupní data nejsou platná. Podporována jsou pouze vstupní data typu {0}. - The supplied input stream is not valid. Only {0} is supported as input stream. + Zadaný vstupní datový proud není platný. Jako vstupní datový proud se podporuje pouze {0}. - The supplied output stream set is not valid. Only {0} is supported as output stream. + Zadaná sada výstupních datových proudů není platná. Jako výstupní datový proud se podporuje pouze {0}. Zadaná hodnota WSMAN_SENDER_DETAILS není platná. Nelze zpracovat WSMAN_SENDER_DETAILS s hodnotou null. - The supplied shell context is not valid. + Zadaný kontext prostředí není platný. {0} - NULL value is not allowed for {0} with the plugin method {1}. + Hodnota NULL není povolena pro {0} s metodou modulu plug-in {1}. - NULL value is not allowed for input stream and output stream sets. {0} and {1} are the supported input and output streams. + Hodnota NULL není povolena pro sady vstupních a výstupních streamů. {0} a {1} jsou podporované vstupní a výstupní streamy. - NULL value is not allowed for {0} with the plugin method {1}. + Hodnota NULL není povolena pro {0} s metodou modulu plug-in {1}. - NULL value is not allowed for {0} with the plugin method {1}. + Hodnota NULL není povolena pro {0} s metodou modulu plug-in {1}. - PowerShell plugin operation is shutting down. This may happen if the hosting service or application is shutting down. + Operace modulu plug-in PowerShellu se ukončuje. K tomu může dojít, pokud se hostitelská služba nebo aplikace vypíná. - PowerShell plugin does not understand the option {0}. Make sure the client is compatible with the build {1} and the protocol version {2} of PowerShell. + Modul plug-in PowerShellu nerozpoznal možnost {0}. Ujistěte se, že je klient kompatibilní se sestavením {1} a verzí {2} protokolu PowerShellu. Od klienta je očekávána možnost s názvem {0}. Ujistěte se, že je klient kompatibilní se sestavením {1} a verzí {2} protokolu PowerShellu. - <PSProtocolVersionError ServerProtocolVersion="{0}" ServerBuildVersion="{1}">Powershell plugin does not support the protocol version {2} requested by client.</PSProtocolVersionError> + <PSProtocolVersionError ServerProtocolVersion="{0}" ServerBuildVersion="{1}">Modul plug-in PowerShell nepodporuje verzi protokolu {2} požadovanou klientem.</PSProtocolVersionError> - Powershell plugin encountered a fatal error while reporting context to WSMan service. + Modul plug-in PowerShellu zaznamenal závažnou chybu při hlášení kontextu službě WSMan. Nelze vytvořit relaci na spravovaném serveru. - Powershell plugin encountered a fatal error registering a wait handle for shutdown notification. + Modul plug-in PowerShellu zaznamenal závažnou chybu při registraci obslužné rutiny čekání na oznámení o vypnutí. Nelze zadat prostředí Runspace, protože prostředí Runspace je již v této relaci použito. @@ -1662,7 +1662,7 @@ Proces klienta SSH se ukončil dříve, než bylo možné navázat připojení.< PowerShell 6+ nepodporuje WOW64. Binární soubor musí odpovídat architektuře procesoru. - The "{0}" executable file was not found. Verify that the WOW64 feature is installed. + Spustitelný soubor {0} nebyl nalezen. Ověřte, že je nainstalovaná funkce WOW64. Nelze nainstalovat modul plug-in {0} do adresáře {1}. @@ -1703,7 +1703,7 @@ Proces klienta SSH se ukončil dříve, než bylo možné navázat připojení.< Výjimka vzdáleného ladicího programu: {0}, chybová zpráva: {1} - Unable to create Windows PowerShell process because Windows PowerShell could not be found on this machine. + Proces Windows PowerShellu nelze vytvořit, protože na tomto počítači nebyl Windows PowerShell nalezen. Argument prostředí Runspace, které se má vytvořit, musí být objekt RemoteRunspace, který není null. diff --git a/src/System.Management.Automation/resources/cs/RunspaceInit.cs.resx b/src/System.Management.Automation/resources/cs/RunspaceInit.cs.resx index acfb5605bb6..b345bd091d1 100644 --- a/src/System.Management.Automation/resources/cs/RunspaceInit.cs.resx +++ b/src/System.Management.Automation/resources/cs/RunspaceInit.cs.resx @@ -118,114 +118,114 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Variable to hold the enabled experimental feature names + Proměnná obsahující názvy povolených experimentálních funkcí - Parent folder of the host application of the current runspace + Nadřazená složka hostitelské aplikace aktuálního prostředí runspace - Folder containing the current user's profile + Složka obsahující profil aktuálního uživatele - A reference to the host of the current runspace + Odkaz na hostitele aktuálního prostředí runspace - The run objects available to cmdlets + Objekty spuštění dostupné rutinám - Version information for current PowerShell session + Informace o verzi pro aktuální relaci PowerShellu - Current process ID + ID aktuálního procesu - Status of last command + Stav posledního příkazu - Parent process ID + ID nadřazeného procesu - The ShellID identifies the current shell. This is used by #Requires. + ShellID identifikuje aktuální prostředí. Používá se v rámci #Requires. - Name of the current console file + Název aktuálního souboru konzoly - The text encoding used when piping text to a native executable file + Kódování textu používané při předávání textu nativnímu spustitelnému souboru prostřednictvím kanálu. - The text encoding used when reading output text from a native executable file + Kódování textu používané při čtení výstupního textu z nativního spustitelného souboru - Configuration controlling how text is rendered. + Konfigurace, která řídí způsob vykreslování textu - Variable to contain the name of the email server. This can be used instead of the HostName parameter in the Send-MailMessage cmdlet. + Proměnná obsahující název e-mailového serveru Lze použít místo parametru HostName v rutině Send-MailMessage. - Dictates when confirmation should be requested. Confirmation is requested when the ConfirmImpact of the operation is equal to or greater than $ConfirmPreference. If $ConfirmPreference is None, actions will only be confirmed when Confirm is specified. + Určuje, kdy se má požádat o potvrzení. Potvrzení je požadováno, pokud je hodnota ConfirmImpact operace rovna hodnotě $ConfirmPreference nebo je vyšší. Pokud má $ConfirmPreference hodnotu None, akce budou potvrzeny pouze v případě, že je zadán parametr Confirm. - Dictates the action taken when a Debug message is delivered + Určuje akci, která se provede při doručení ladicí zprávy. - Dictates the action taken when an error message is delivered + Určuje akci, která se provede při doručení chybové zprávy. - Dictates the action taken when progress records are delivered + Určuje akci, která se provede při doručení záznamů o průběhu. - Dictates the action taken when a Verbose message is delivered + Určuje akci, která se provede při doručení podrobné zprávy. - Dictates the action taken when a Warning message is delivered + Určuje akci, která se provede při doručení zprávy upozornění. - Dictates the action taken when a command generates an item in the Information stream + Určuje akci, která se provede, když příkaz vygeneruje položku v informačním streamu. - Dictates the view mode to use when displaying errors + Určuje režim zobrazení používaný při zobrazování chyb. - Dictates what type of prompt should be displayed for the current nesting level + Určuje, jaký typ výzvy se má zobrazit pro aktuální úroveň vnoření. - If true, $ErrorActionPreference applies to native executables, so that non-zero exit codes will generate cmdlet-style errors governed by error action settings + Pokud má hodnotu true, vztahuje se $ErrorActionPreference na nativní spustitelné soubory, takže nenulové ukončovací kódy budou generovat chyby ve stylu rutin, které se řídí nastavením akce při chybě. - If true, WhatIf is considered to be enabled for all commands. + Pokud má hodnotu true, považuje se WhatIf za povolené pro všechny příkazy. - Dictates how arguments are passed to native executables. + Určuje způsob předávání argumentů nativním spustitelným souborům. - Dictates the limit of enumeration on formatting IEnumerable objects + Určuje limit výčtu při formátování objektů IEnumerable. - Displays errors with a stack trace + Zobrazuje chyby s trasováním zásobníku. - Displays errors with inner exceptions + Zobrazí chyby s vnitřními výjimkami. - Displays errors with their sources + Zobrazuje chyby i jejich zdroje - Displays errors with a description of the error class + Zobrazuje chyby s popisem třídy chyby. - Culture of the current PowerShell session + Jazyková verze aktuální relace PowerShellu - UI culture of the current PowerShell session + Jazyková verze uživatelského rozhraní aktuální relace PowerShellu - Variable to hold all default <cmdlet:parameter, value> pairs + Proměnná obsahující všechny výchozí dvojice <rutina:parametr, hodnota> - Press Enter to continue... + Pokračujte stisknutím klávesy Enter... - Edition information for the current PowerShell session + Informace o edici pro aktuální relaci PowerShellu \ No newline at end of file From 909d7f4e6b0fac0f658a2046f977b4997a17405c Mon Sep 17 00:00:00 2001 From: olprod Date: Fri, 14 Aug 2026 12:26:04 -0700 Subject: [PATCH 2/7] Localized file check-in by OneLocBuild Task: Build definition ID 13420: Build ID 2677113 --- .../cs/ConsoleInfoErrorStrings.cs.resx | 22 +-- .../cs/FormatAndOut_format_xxx.cs.resx | 38 ++--- .../CimInstanceTypeAdapterResources.de.resx | 4 +- .../de/ConsoleInfoErrorStrings.de.resx | 22 +-- .../de/EnumExpressionEvaluatorStrings.de.resx | 18 +- .../de/FileSystemProviderStrings.de.resx | 154 +++++++++--------- .../de/FormatAndOut_format_xxx.de.resx | 38 ++--- .../resources/de/FormatAndOut_out_xxx.de.resx | 12 +- .../resources/de/GetErrorText.de.resx | 18 +- .../resources/es/AutomationExceptions.es.resx | 60 +++---- .../CimInstanceTypeAdapterResources.es.resx | 4 +- .../es/ConsoleInfoErrorStrings.es.resx | 22 +-- .../es/FileSystemProviderStrings.es.resx | 154 +++++++++--------- .../es/FormatAndOut_format_xxx.es.resx | 38 ++--- .../resources/es/FormatAndOut_out_xxx.es.resx | 12 +- .../resources/es/GetErrorText.es.resx | 18 +- .../resources/fr/AutomationExceptions.fr.resx | 60 +++---- .../CimInstanceTypeAdapterResources.fr.resx | 4 +- .../fr/ConsoleInfoErrorStrings.fr.resx | 22 +-- .../fr/EnumExpressionEvaluatorStrings.fr.resx | 18 +- .../fr/FormatAndOut_format_xxx.fr.resx | 40 ++--- .../resources/fr/FormatAndOut_out_xxx.fr.resx | 12 +- .../resources/fr/GetErrorText.fr.resx | 18 +- .../it/ConsoleInfoErrorStrings.it.resx | 22 +-- .../it/FormatAndOut_format_xxx.it.resx | 38 ++--- .../CimInstanceTypeAdapterResources.ja.resx | 4 +- .../ja/ConsoleInfoErrorStrings.ja.resx | 22 +-- .../resources/ja/FormatAndOut_out_xxx.ja.resx | 12 +- .../resources/ja/GetErrorText.ja.resx | 18 +- .../CimInstanceTypeAdapterResources.pl.resx | 4 +- .../pl/ConsoleInfoErrorStrings.pl.resx | 22 +-- .../pl/EnumExpressionEvaluatorStrings.pl.resx | 18 +- .../pl/FileSystemProviderStrings.pl.resx | 154 +++++++++--------- .../pl/FormatAndOut_format_xxx.pl.resx | 38 ++--- .../resources/pl/FormatAndOut_out_xxx.pl.resx | 12 +- .../CimInstanceTypeAdapterResources.ru.resx | 4 +- .../ru/ConsoleInfoErrorStrings.ru.resx | 22 +-- .../ru/EnumExpressionEvaluatorStrings.ru.resx | 18 +- .../resources/ru/FormatAndOut_out_xxx.ru.resx | 12 +- .../resources/tr/AutomationExceptions.tr.resx | 60 +++---- .../tr/ConsoleInfoErrorStrings.tr.resx | 22 +-- .../tr/EnumExpressionEvaluatorStrings.tr.resx | 18 +- .../zh-Hans/AutomationExceptions.zh-Hans.resx | 60 +++---- .../ConsoleInfoErrorStrings.zh-Hans.resx | 22 +-- .../FileSystemProviderStrings.zh-Hans.resx | 154 +++++++++--------- .../FormatAndOut_format_xxx.zh-Hans.resx | 40 ++--- .../zh-Hans/FormatAndOut_out_xxx.zh-Hans.resx | 12 +- ...mInstanceTypeAdapterResources.zh-Hant.resx | 4 +- .../ConsoleInfoErrorStrings.zh-Hant.resx | 22 +-- ...numExpressionEvaluatorStrings.zh-Hant.resx | 18 +- 50 files changed, 830 insertions(+), 830 deletions(-) diff --git a/src/System.Management.Automation/resources/cs/ConsoleInfoErrorStrings.cs.resx b/src/System.Management.Automation/resources/cs/ConsoleInfoErrorStrings.cs.resx index 2b7c8007e1e..f545ef18f57 100644 --- a/src/System.Management.Automation/resources/cs/ConsoleInfoErrorStrings.cs.resx +++ b/src/System.Management.Automation/resources/cs/ConsoleInfoErrorStrings.cs.resx @@ -118,36 +118,36 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Incorrect PowerShell version {0}. PowerShell version {1} is supported on this computer. + Nesprávná verze PowerShellu {0}. Na tomto počítači je podporována verze PowerShellu {1}. - The following errors occurred when loading console {0}: {1} + Při načítání konzoly {0} došlo k následujícím chybám: {1} - Cannot load PowerShell snap-in {0} because of the following error: {1} + Modul snap-in PowerShellu {0} nelze načíst z důvodu následující chyby: {1} - PowerShell snap-in "{0}" loaded with the following warnings: {1} + Modul snap-in PowerShellu {0} byl načten s následujícími upozorněními: {1} - The PowerShell snap-in module {0} does not have the required PowerShell snap-in strong name {1}. + Modul snap-in PowerShellu {0} nemá požadovaný silný název modulu snap-in PowerShellu {1}. - The cmdlet '{0}' should not occur more than once in PowerShell snap-in '{1}'. + Rutina {0} se v modulu snap-in PowerShellu {1} nesmí vyskytovat více než jednou. - PowerShell provider '{0}' should not occur more than once in PowerShell snap-in '{1}'. + Zprostředkovatel PowerShellu {0} se v modulu snap-in PowerShellu {1} nesmí vyskytovat více než jednou. - PowerShell {0} is not supported in the current console. PowerShell {1} is supported in the current console. + PowerShell {0} se v aktuální konzole nepodporuje. PowerShell {1} je v aktuální konzole podporován. - File {0} already exists and {1} was specified. + Soubor {0} již existuje a už bylo zadáno: {1}. - The provided configuration file '{0}' does not exist. + Zadaný konfigurační soubor {0} neexistuje. - The provided configuration file '{0}' must have a .pssc file extension. + Poskytnutý konfigurační soubor {0} musí mít příponu souboru .pssc. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/cs/FormatAndOut_format_xxx.cs.resx b/src/System.Management.Automation/resources/cs/FormatAndOut_format_xxx.cs.resx index 612afc99349..c35107ace49 100644 --- a/src/System.Management.Automation/resources/cs/FormatAndOut_format_xxx.cs.resx +++ b/src/System.Management.Automation/resources/cs/FormatAndOut_format_xxx.cs.resx @@ -118,65 +118,65 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cmdlet parameters View and Property are mutually exclusive. + Parametry rutiny View a Property se vzájemně vylučují. - Cmdlet parameters AutoSize and Column are mutually exclusive. + Parametry rutiny AutoSize a Column se vzájemně vylučují. - The view name {0} cannot be found. + Název zobrazení {0} nebyl nalezen. - The view name {0} cannot be found in the {1} formatting. + Název zobrazení {0} nebyl ve formátování {1} nalezen. {0} indicates one of the valid formating types such as Table, List, Wide or Custom. - There are no existing {0} views for {1} objects. + Pro objekty {1} neexistují žádná zobrazení {0}. - The view name {0} cannot be found. Specify one of the following {1} views and try again: {2}. + Název zobrazení {0} nebyl nalezen. Zadejte jedno z následujících {1} zobrazení a zkuste to znovu: {2}. - Try using one of these other format cmdlets: + Zkuste použít některou z těchto dalších rutin pro formátování: Prefix text to suggest user to use one of the valid view names. {0}: - The following object supports IEnumerable: + Následující objekt podporuje rozhraní IEnumerable: - The IEnumerable contains no objects. + Rozhraní IEnumerable neobsahuje žádné objekty. - The IEnumerable contains the following object: + Rozhraní IEnumerable obsahuje následující objekt: - The IEnumerable contains the following {0} objects: + Rozhraní IEnumerable obsahuje následující objekty ({0}): - Unknown class Id {0}. + Neznámé ID třídy {0}. - The type {0} for property {1} is not valid. + Typ {0} pro vlastnost {1} není platný. - The value of the {0} data member cannot be null. + Hodnota datového členu {0} nemůže být null. - The object type is not recognized. + Typ objektu nebyl rozpoznán. - Failed to create object with class Id {0}. + Nepodařilo se vytvořit objekt s ID třídy {0}. - The {0} property is recursive. + Vlastnost {0} je rekurzivní. - Failed to evaluate expression "{0}". + Nepodařilo se vyhodnotit výraz {0}. - Failed to interpret format string "{0}". + Nepodařilo se interpretovat formátovací řetězec {0}. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/de/CimInstanceTypeAdapterResources.de.resx b/src/System.Management.Automation/resources/de/CimInstanceTypeAdapterResources.de.resx index 4f3fda63c2e..782532da063 100644 --- a/src/System.Management.Automation/resources/de/CimInstanceTypeAdapterResources.de.resx +++ b/src/System.Management.Automation/resources/de/CimInstanceTypeAdapterResources.de.resx @@ -118,10 +118,10 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot convert "{0}" to an object of type "{1}". + „{0}“ kann nicht in ein Objekt vom Typ „{1}“ konvertiert werden. - "{0}" is a ReadOnly property. + „{0}“ ist eine schreibgeschützte Eigenschaft. {0} gets property name \ No newline at end of file diff --git a/src/System.Management.Automation/resources/de/ConsoleInfoErrorStrings.de.resx b/src/System.Management.Automation/resources/de/ConsoleInfoErrorStrings.de.resx index 2b7c8007e1e..44913b3cbab 100644 --- a/src/System.Management.Automation/resources/de/ConsoleInfoErrorStrings.de.resx +++ b/src/System.Management.Automation/resources/de/ConsoleInfoErrorStrings.de.resx @@ -118,36 +118,36 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Incorrect PowerShell version {0}. PowerShell version {1} is supported on this computer. + Falsche PowerShell-Version {0}. Die PowerShell-Version {1} wird auf diesem Computer unterstützt. - The following errors occurred when loading console {0}: {1} + Beim Laden der Konsole „{0}“ sind folgende Fehler aufgetreten: {1} - Cannot load PowerShell snap-in {0} because of the following error: {1} + Das PowerShell-Snap-In „{0}“ kann aufgrund des folgenden Fehlers nicht geladen werden: {1} - PowerShell snap-in "{0}" loaded with the following warnings: {1} + Das PowerShell-Snap-In „{0}“ wurde mit den folgenden Warnungen geladen: {1} - The PowerShell snap-in module {0} does not have the required PowerShell snap-in strong name {1}. + Das PowerShell-Snap-In-Modul „{0}“ verfügt nicht über den erforderlichen starken Namen des PowerShell-Snap-Ins {1}. - The cmdlet '{0}' should not occur more than once in PowerShell snap-in '{1}'. + Das Cmdlet „{0}“ darf im PowerShell-Snap-In „{1}“ nicht mehr als einmal vorkommen. - PowerShell provider '{0}' should not occur more than once in PowerShell snap-in '{1}'. + PowerShell-Anbieter „{0}“ darf im PowerShell-Snap-In „{1}“ nicht mehr als einmal vorkommen. - PowerShell {0} is not supported in the current console. PowerShell {1} is supported in the current console. + PowerShell „{0}“ wird in der aktuellen Konsole nicht unterstützt. PowerShell „{1}“ wird in der aktuellen Konsole unterstützt. - File {0} already exists and {1} was specified. + Die Datei „{0}“ ist bereits vorhanden und „{1}“ wurde angegeben. - The provided configuration file '{0}' does not exist. + Die angegebene Konfigurationsdatei „{0}“ ist nicht vorhanden. - The provided configuration file '{0}' must have a .pssc file extension. + Die angegebene Konfigurationsdatei „{0}“ muss die PSSC-Dateierweiterung haben. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/de/EnumExpressionEvaluatorStrings.de.resx b/src/System.Management.Automation/resources/de/EnumExpressionEvaluatorStrings.de.resx index 8faa9a881bd..7016b7cd450 100644 --- a/src/System.Management.Automation/resources/de/EnumExpressionEvaluatorStrings.de.resx +++ b/src/System.Management.Automation/resources/de/EnumExpressionEvaluatorStrings.de.resx @@ -118,31 +118,31 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The input expression must not be empty. Specify at least one identifier name in each input expression. + Der Eingabeausdruck darf nicht leer sein. Geben Sie in jedem Eingabeausdruck mindestens einen Bezeichnernamen an. - Unable to match an empty identifier name to a valid enumerator name. Specify one of the following enumerator names and retry: {0}. + Ein leerer Bezeichner kann keinem gültigen Enumeratornamen zugeordnet werden. Geben Sie einen der folgenden Enumeratornamen an, und wiederholen Sie den Vorgang: {0}. - The generic type specified for the expression must represent an enum. Specify a valid enum type. + Der für den Ausdruck angegebene generische Typ muss eine Enumeration darstellen. Geben Sie einen gültigen Enumerationstyp an. - The identifier name {0} cannot be processed because it is either too similar or identical to the following enumerator names: {1}. Use a more specific identifier name. + Der Bezeichnername „{0}“ kann nicht verarbeitet werden, da er den folgenden Enumeratornamen entweder zu ähnlich oder identisch ist: {1}. Verwenden Sie einen spezifischeren Bezeichnernamen. - Unable to match the identifier name {0} to a valid enumerator name. Specify one of the following enumerator names and try again: + Der Bezeichner kann keinem gültigen Enumeratornamen „{0}“ zugeordnet werden. Geben Sie einen der folgenden Enumeratornamen an, und versuchen Sie es erneut: {1} - Use of parentheses is not valid in the expression because identifier grouping is not allowed. Try removing the parentheses, or if a subexpression is enclosed, try expanding the expression. + Die Verwendung von Klammern ist in dem Ausdruck nicht zulässig, da eine Gruppierung von Bezeichnern nicht erlaubt ist. Entfernen Sie die Klammern, oder erweitern Sie den Ausdruck, wenn ein Teilausdruck eingeschlossen ist. - Unable to parse the expression due to an unexpected token. Only an OR (,) operator or AND (+) operator is expected after an identifier name. + Der Ausdruck kann aufgrund eines unerwarteten Tokens nicht analysiert werden. Nach einem Bezeichnernamen wird nur ein OR (,)-Operator oder ein AND (+)-Operator erwartet. - Unable to parse the expression due to an unexpected token after a NOT (!) operator. An identifier name is expected after a NOT (!) operator. + Der Ausdruck kann aufgrund eines unerwarteten Tokens nach einem NOT (!)-Operator nicht analysiert werden. Nach einem NOT (!)-Operator wird ein Bezeichnername erwartet. - Unable to parse the expression due to an unexpected token. An identifier name or a NOT (!) operator is expected at the start of the expression, or after an OR (,) operator or an AND (+) operator. Also, an expression must not end with an OR (,), AND (+) or NOT (!) operator. + Der Ausdruck kann aufgrund eines unerwarteten Tokens nicht analysiert werden. Zu Beginn des Ausdrucks oder nach einem OR-Operator (,) bzw. einem AND-Operator (+) wird ein Bezeichnername oder ein NOT-Operator (!) erwartet. Außerdem darf ein Ausdruck nicht mit einem OR-Operator (,), einem AND-Operator (+) oder einem NOT-Operator (!) enden. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/de/FileSystemProviderStrings.de.resx b/src/System.Management.Automation/resources/de/FileSystemProviderStrings.de.resx index 490abb2f0cc..43f7e9fa78f 100644 --- a/src/System.Management.Automation/resources/de/FileSystemProviderStrings.de.resx +++ b/src/System.Management.Automation/resources/de/FileSystemProviderStrings.de.resx @@ -118,240 +118,240 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Invoke Item + Element aufrufen - Item: {0} + Element: {0} - Remove File + Datei entfernen - Remove Directory + Verzeichnis entfernen - Copy File + Datei kopieren - Item: {0} Destination: {1} + Element: {0} Ziel: {1} - Copy Directory + Verzeichnis kopieren - Rename File + Datei umbenennen - Rename Directory + Verzeichnis umbenennen - Item: {0} Destination: {1} + Element: {0} Ziel: {1} - Move File + Datei verschieben - Move Directory + Verzeichnis verschieben - Item: {0} Destination: {1} + Element: {0} Ziel: {1} - Set Property File + Eigenschaftendatei festlegen - Set Property Directory + Eigenschaftenverzeichnis festlegen - Item: {0} Property: {1} Value: {2} + Element: {0} Eigenschaft: {1} Wert: {2} - Clear Property File + Eigenschaftendatei löschen - Clear Property Directory + Eigenschaftenverzeichnis löschen - Item: {0} Property: {1} + Element: {0} Eigenschaft: {1} - Create File + Datei erstellen - Create Directory + Verzeichnis erstellen - Destination: {0} + Ziel: {0} - Clear Content + Inhalt löschen - Item: {0} + Element: {0} - Could not find item {0}. + Das Element „{0}“ wurde nicht gefunden. - Cannot remove item {0}: {1} + Das Element „{0}“ kann nicht entfernt werden: {1} - Cannot restore attributes on item {0}: {1} + Die Attribute für das Element „{0}“ können nicht wiederhergestellt werden: {1} - An object at the specified path {0} does not exist. + Ein Objekt am angegebenen Pfad „{0}“ ist nicht vorhanden. - Directory {0} cannot be removed because it is not empty. + Das Verzeichnis „{0}“ kann nicht entfernt werden, da es nicht leer ist. - The type is not a known type for the file system. Only "file","directory" or "symboliclink" can be specified. + Der Typ ist für das Dateisystem nicht bekannt. Es können nur „file“, „directory“ oder „symboliclink“ angegeben werden. - Cannot process the path because the specified path refers to an item that is outside the basePath. + Der Pfad kann nicht verarbeitet werden, da der angegebene Pfad auf ein Element außerhalb von basePath verweist. - The specified drive root "{0}" either does not exist, or it is not a folder. + Der angegebene Laufwerkstamm „{0}“ ist entweder nicht vorhanden oder es handelt sich nicht um einen Ordner. - An item with the specified name {0} already exists. + Es ist bereits ein Element mit dem angegebenen Namen „{0}“ vorhanden. - A delimiter cannot be specified when reading the stream one byte at a time. + Beim Lesen des Datenstroms Byte für Byte kann kein Trennzeichen angegeben werden. - Cannot overwrite the item {0} with itself. + Das Element „{0}“ kann nicht mit sich selbst überschrieben werden. - Cannot rename the specified target, because it represents a path or device name. + Das angegebene Ziel kann nicht umbenannt werden, da es einen Pfad- oder Gerätenamen darstellt. - The property {0} does not exist or was not found. + Die Eigenschaft „{0}“ ist nicht vorhanden oder wurde nicht gefunden. - You do not have sufficient access rights to perform this operation or the item is hidden, system, or read only. + Sie verfügen nicht über ausreichende Zugriffsrechte, um diesen Vorgang auszuführen, oder das Element ist ausgeblendet, systemseitig oder schreibgeschützt. - The attribute cannot be set because attributes are not supported. Only the following attributes can be set: Archive, Hidden, Normal, ReadOnly, or System. + Das Attribut kann nicht festgelegt werden, da Attribute nicht unterstützt werden. Nur die folgenden Attribute können festgelegt werden: „Archive“, „Hidden“, „Normal“, „ReadOnly“ oder „System“. - The property cannot be cleared because the property is not supported. Only the Attributes property can be cleared. + Die Eigenschaft kann nicht gelöscht werden, da sie nicht unterstützt wird. Nur die Eigenschaft Attributes kann gelöscht werden. - Cannot process path '{0}' because the target represents a reserved device name. + Der Pfad „{0}“ kann nicht verarbeitet werden, da das Ziel einen reservierten Gerätenamen darstellt. - Encoding not used when '-AsByteStream' specified. + Die Codierung wird nicht verwendet, wenn „-AsByteStream“ angegeben ist. - Cannot proceed with byte encoding. When using byte encoding the content must be of type byte. + Die Bytecodierung kann nicht fortgesetzt werden. Bei Verwendung der Bytecodierung muss der Inhalt vom Typ „byte“ sein. - Cannot process the file because the file {0} was not found. + Die Datei kann nicht verarbeitet werden, da die Datei „{0}“ nicht gefunden wurde. - Directory: + Verzeichnis: - Cannot detect the encoding of the file. The specified encoding {0} is not supported when the content is read in reverse. + Die Codierung der Datei kann nicht erkannt werden. Die angegebene Codierung „{0}“ wird nicht unterstützt, wenn der Inhalt in umgekehrter Reihenfolge gelesen wird. - Could not open the alternate data stream '{0}' of the file '{1}'. + Der alternative Datenstrom „{0}“ der Datei „{1}“ konnte nicht geöffnet werden. - Stream '{0}' of file '{1}'. + Stream „{0}“ der Datei „{1}“. - The Raw and Wait parameters cannot be specified in the same command. + Die Parameter „Raw“ und „Wait“ können nicht im selben Befehl angegeben werden. - To use the Persist switch parameter, the drive name must be supported by the operating system (for example, drive letters A-Z). + Damit der Parameter „Persist“ verwendet werden kann, muss der Laufwerksname vom Betriebssystem unterstützt werden (z. B. Laufwerkbuchstaben A-Z). - When you use the Persist parameter, the root must be a file system location on a remote computer. + Wenn Sie den Parameter „Persist“ verwenden, muss der Stamm ein Dateisystemort auf einem Remotcomputer sein. - The '{0}' and '{1}' parameters cannot be specified in the same command. + Die Parameter „{0}“ und „{1}“ können nicht im selben Befehl angegeben werden. - A directory is required for the operation. The item '{0}' is not a directory. + Für den Vorgang ist ein Verzeichnis erforderlich. Das Element „{0}“ ist kein Verzeichnis. - Create Junction + Junction erstellen - Create Symbolic Link + Symbolische Verknüpfung erstellen - Administrator privilege required for this operation. + Für diesen Vorgang sind Administratorrechte erforderlich. - Create Hard Link + Feste Verknüpfung erstellen - A file is required for the operation. The item '{0}' is not a file. + Für den Vorgang ist eine Datei erforderlich. Das Element „{0}“ ist keine Datei. - Hard links are not supported for the specified path. + Feste Verknüpfungen werden für den angegebenen Pfad nicht unterstützt. - Symbolic links are not supported for the specified path. + Symbolische Verknüpfungen werden für den angegebenen Pfad nicht unterstützt. '{0}' wird in '{1}' kopiert. - Destination path {0} is a file that already exists on the target destination. + Der Zielpfad „{0}“ ist eine Datei, die am Zielort bereits vorhanden ist. - Failed to copy file {0} to remote target destination. + Fehler beim Kopieren der Datei „{0}“ an das Remotziel. Von {0} bis {1} - Cannot copy a directory '{0}' to file '{0}' + Ein Verzeichnis „{0}“ kann nicht in die Datei „{0}“ kopiert werden. - Failed to get directory {0} child items. + Fehler beim Abrufen der untergeordneten Elemente von Verzeichnis „{0}“. - Failed to read remote file '{0}'. + Fehler beim Lesen der Remotedatei „{0}“. - Cannot validate if remote destination {0} is a file. + Es kann nicht überprüft werden, ob das Remoteziel „{0}“ eine Datei ist. - Failed to create directory '{0}' on remote destination. + Fehler beim Erstellen des Verzeichnisses „{0}“ am entfernten Ziel. - Maximum size for drive has been exceeded: {0}. + Die maximale Laufwerksgröße wurde überschritten: {0}. - Cannot create link because the path already exists: {0}. + Die Verknüpfung kann nicht erstellt werden, da der Pfad bereits vorhanden ist: {0}. - Skip already-visited directory {0}. + Bereits besuchtes Verzeichnis „{0}“ überspringen. - Destination path cannot be a subdirectory of the source or the source itself: {0}. + Der Zielpfad darf kein Unterverzeichnis der Quelle oder die Quelle selbst sein: {0}. - The target and path cannot be the same. + Ziel und Pfad dürfen nicht identisch sein. - Copied {0} of {1} files + {0} von {1} Dateien kopiert - {0} of {1} ({2:0.0} MB/s) + {0} von {1} ({2:0.0} MB/s) - Removed {0} of {1} files + {0} von {1} Dateien entfernt - {0} of {1} ({2:0.0} MB/s) + {0} von {1} ({2:0.0} MB/s) - Creating a junction requires an absolute path for the target. + Zum Erstellen einer Verknüpfung ist ein absoluter Pfad für das Ziel erforderlich. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/de/FormatAndOut_format_xxx.de.resx b/src/System.Management.Automation/resources/de/FormatAndOut_format_xxx.de.resx index 612afc99349..06774001370 100644 --- a/src/System.Management.Automation/resources/de/FormatAndOut_format_xxx.de.resx +++ b/src/System.Management.Automation/resources/de/FormatAndOut_format_xxx.de.resx @@ -118,65 +118,65 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cmdlet parameters View and Property are mutually exclusive. + Cmdlet-Parameter „View“ und „Property“ schließen sich gegenseitig aus. - Cmdlet parameters AutoSize and Column are mutually exclusive. + Cmdlet-Parameter „AutoSize“ und „Column“ schließen sich gegenseitig aus. - The view name {0} cannot be found. + Der Ansichtsname „{0}“ wurde nicht gefunden. - The view name {0} cannot be found in the {1} formatting. + Der Ansichtsname „{0}“ kann in der {1}-Formatierung nicht gefunden werden. {0} indicates one of the valid formating types such as Table, List, Wide or Custom. - There are no existing {0} views for {1} objects. + Es gibt keine vorhandenen {0}-Ansichten für {1}-Objekte. - The view name {0} cannot be found. Specify one of the following {1} views and try again: {2}. + Der Ansichtsname „{0}“ wurde nicht gefunden. Geben Sie eine der folgenden {1}-Ansichten an, und versuchen Sie es erneut: {2}. - Try using one of these other format cmdlets: + Verwenden Sie eines dieser anderen Format-Cmdlets: Prefix text to suggest user to use one of the valid view names. {0}: - The following object supports IEnumerable: + Das folgende Objekt unterstützt IEnumerable: - The IEnumerable contains no objects. + IEnumerable enthält keine Objekte. - The IEnumerable contains the following object: + IEnumerable enthält das folgende Objekt: - The IEnumerable contains the following {0} objects: + IEnumerable enthält die folgenden {0}-Objekte: - Unknown class Id {0}. + Unbekannte Klassen-ID {0}. - The type {0} for property {1} is not valid. + Der Typ „{0}“ für die Eigenschaft „{1}“ ist ungültig. - The value of the {0} data member cannot be null. + Der Wert des {0}-Datenmembers darf nicht null sein. - The object type is not recognized. + Der Objekttyp wird nicht erkannt. - Failed to create object with class Id {0}. + Fehler beim Erstellen des Objekts mit der Klassen-ID {0}. - The {0} property is recursive. + Die {0}-Eigenschaft ist rekursiv. - Failed to evaluate expression "{0}". + Fehler beim Auswerten des Ausdrucks „{0}“. - Failed to interpret format string "{0}". + Die Formatzeichenfolge „{0}“ konnte nicht interpretiert werden. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/de/FormatAndOut_out_xxx.de.resx b/src/System.Management.Automation/resources/de/FormatAndOut_out_xxx.de.resx index 94f22248141..69e2e10530c 100644 --- a/src/System.Management.Automation/resources/de/FormatAndOut_out_xxx.de.resx +++ b/src/System.Management.Automation/resources/de/FormatAndOut_out_xxx.de.resx @@ -118,21 +118,21 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - <SPACE> next page; <CR> next line; Q quit + <SPACE> nächste Seite; <CR> nächste Zeile; Q beenden - The value of LineOutput should not be null. + Der Wert von LineOutput darf nicht NULL sein. - The lineOutput type {0} was not expected; LineOutput expects type {1}. + Der lineOutput-Typ „{0}“ wurde nicht erwartet; LineOutput erwartet den Typ „{1}“. - The object of type "{0}" is not valid or not in the correct sequence. This is likely caused by a user-specified "{1}" command which is conflicting with the default formatting. + Das Objekt des Typs „{0}“ ist ungültig oder nicht in der richtigen Reihenfolge. Dies wird wahrscheinlich durch einen vom Benutzer angegebenen „{1}“-Befehl verursacht, der mit der Standardformatierung in Konflikt steht. - Cannot open file "{0}". + Die Datei „{0}“ kann nicht geöffnet werden. - Output to File + In Datei ausgeben \ No newline at end of file diff --git a/src/System.Management.Automation/resources/de/GetErrorText.de.resx b/src/System.Management.Automation/resources/de/GetErrorText.de.resx index a4acd582337..0fbc4aa2817 100644 --- a/src/System.Management.Automation/resources/de/GetErrorText.de.resx +++ b/src/System.Management.Automation/resources/de/GetErrorText.de.resx @@ -118,30 +118,30 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot load a resource with base name "{0}". + Eine Ressource mit dem Basisnamen „{0}“ kann nicht geladen werden. - Cannot load a resource string with ID "{0}". + Eine Ressourcenzeichenfolge mit der ID „{0}“ kann nicht geladen werden. - Running commands is prevented by Stop policy settings. + Das Ausführen von Befehlen wird durch die Einstellungen der Stop-Richtlinie verhindert. - Cannot retrieve the message "{0}" "{1}" "{2}" because an assembly was not registered. + Die Nachricht „{0}“ „{1}“ „{2}“ kann nicht abgerufen werden, da keine Assembly registriert wurde. - Cannot retrieve the message "{0}" "{1}" "{2}". A template string format is not valid in template string "{3}". + Die Nachricht „{0}“ „{1}“ „{2}“ kann nicht abgerufen werden. Ein Vorlagenzeichenfolgenformat ist in der Vorlagenzeichenfolge „{3}“ ungültig. - Cannot retrieve the message "{0}" "{1}" "{2}". A template string exists, but its value is empty or blank. + Die Nachricht „{0}“ „{1}“ „{2}“ kann nicht abgerufen werden. Eine Vorlagenzeichenfolge ist vorhanden, aber ihr Wert ist leer oder nur aus Leerzeichen bestehend. - The pipeline has been stopped. + Die Pipeline wurde angehalten. - The script failed due to call depth overflow. + Das Skript ist aufgrund eines Überlaufs der Aufruftiefe fehlgeschlagen. - The pipeline failed due to call depth overflow. + Die Pipeline ist aufgrund eines Überlaufs der Aufruftiefe fehlgeschlagen. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/es/AutomationExceptions.es.resx b/src/System.Management.Automation/resources/es/AutomationExceptions.es.resx index 18d6f475628..eb554c39426 100644 --- a/src/System.Management.Automation/resources/es/AutomationExceptions.es.resx +++ b/src/System.Management.Automation/resources/es/AutomationExceptions.es.resx @@ -118,93 +118,93 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot process argument because the value of argument "{0}" is not valid. Change the value of the "{0}" argument and run the operation again. + No se puede procesar el argumento porque el valor del argumento "{0}" no es válido. Cambie el valor del argumento "{0}" y vuelva a ejecutar la operación. - Cannot process argument because the value of parameter "{0}" is not valid. Valid values are "Global", "Local", or "Script", or a number relative to the current scope (0 through the number of scopes where 0 is the current scope and 1 is its parent). Change the value of the "{0}" parameter and run the operation again. + No se puede procesar el argumento porque el valor del parámetro "{0}" no es válido. Los valores válidos son "Global", "Local" o "Script" o un número relacionado con el ámbito actual (de 0 hasta el número de ámbitos, donde 0 es el ámbito actual y 1 es su elemento primario). Cambie el valor del parámetro "{0}" y vuelva a ejecutar la operación. - Cannot process argument because the value of argument "{0}" is null. Change the value of argument "{0}" to a non-null value. + No se puede procesar el argumento porque el valor del argumento "{0}" es null. Cambie el valor del argumento "{0}" a un valor distinto de null. - Cannot process argument because the value of argument "{0}" is out of range. Change argument "{0}" to a value that is within range. + No se puede procesar el argumento porque el valor del argumento "{0}" está fuera del intervalo. Cambie el argumento "{0}" por un valor que esté dentro del intervalo. - Cannot perform operation because operation "{0}" is not valid. Remove operation "{0}", or investigate why it is not valid. + No se puede realizar la operación porque la operación "{0}" no es válida. Quite la operación "{0}" o investigue por qué no es válida. - Cannot perform operation because operation "{0}" is not implemented. + No se puede realizar la operación porque la operación "{0}" no está implementada. - Cannot perform operation because operation "{0}" is not supported. + No se puede realizar la operación porque la operación "{0}" no se admite. - Cannot perform operation because object "{0}" has already been disposed. + No se puede realizar la operación porque el objeto "{0}" ya se ha eliminado. - The script block cannot be invoked because it contains more than one clause. The Invoke() method can only be used on script blocks that contain a single clause. + No se puede invocar el bloque de script porque contiene más de una cláusula. El método Invoke() solo se puede usar en bloques de script que contienen una sola cláusula. - The script block cannot be converted because it contains more than one clause. Expressions or control structures are not permitted. Verify that the script block contains exactly one pipeline or command. + No se puede convertir el bloque de script porque contiene más de una cláusula. No se permiten expresiones ni estructuras de control. Compruebe que el bloque de script contiene exactamente una canalización o un comando. - An empty script block cannot be converted. Verify that the script block contains exactly one pipeline or command. + No se puede convertir un bloque de script vacío. Compruebe que el bloque de script contiene exactamente una canalización o un comando. - Only a script block that contains exactly one pipeline or command can be converted. Expressions or control structures are not permitted. Verify that the script block contains exactly one pipeline or command. + Solo se puede convertir un bloque de script que contenga exactamente una canalización o un comando. No se permiten expresiones ni estructuras de control. Compruebe que el bloque de script contiene exactamente una canalización o un comando. - A script block that contains a top-level trap statement cannot be converted. + No se puede convertir un bloque de script que contiene una instrucción trap de nivel superior. - Cannot generate a PowerShell object for a ScriptBlock dereferencing variables undeclared in the param(...) block. Name of undeclared variable: {0}. + No se puede generar un objeto de PowerShell para un ScriptBlock que desreferencia variables no declaradas en el bloque param(...). Nombre de la variable no declarada: {0}. - Cannot generate a PowerShell object for a ScriptBlock evaluating non-constant expressions. Non-constant expression: {0}. + No se puede generar un objeto de PowerShell para un ScriptBlock que evalúe expresiones no constantes. Expresión no constante: {0}. - Cannot generate a PowerShell object for a ScriptBlock evaluating dynamic expressions. Dynamic expression: {0}. + No se puede generar un objeto de PowerShell para un ScriptBlock que evalúa expresiones dinámicas. Expresión dinámica: {0}. - Cannot generate a PowerShell object for a ScriptBlock that tries to pass other script blocks inside argument values. + No se puede generar un objeto de PowerShell para un ScriptBlock que intenta pasar otros bloques de script dentro de los valores de argumento. - Cannot generate a PowerShell object for a ScriptBlock which invokes pipelines, commands or functions to evaluate arguments of the main pipeline. + No se puede generar un objeto de PowerShell para un ScriptBlock que invoca canalizaciones, comandos o funciones para evaluar argumentos de la canalización principal. - Cannot generate a PowerShell object for a ScriptBlock that uses dot sourcing. + No se puede generar un objeto de PowerShell para un ScriptBlock que usa dot sourcing. - Cannot generate a PowerShell object for a ScriptBlock that invokes other script blocks. + No se puede generar un objeto de PowerShell para un ScriptBlock que invoca otros bloques de script. - The script block cannot be converted to a PowerShell object because it contains forbidden redirection operators. + El bloque de script no se puede convertir en un objeto de PowerShell porque contiene operadores de redirección prohibidos. - Cannot generate a PowerShell object for a ScriptBlock that does not have an associated operation context. + No se puede generar un objeto de PowerShell para un ScriptBlock que no tiene un contexto de operación asociado. - The command was stopped by the user. + El usuario detuvo el comando. - Object "{0}" is the wrong type to return from the dynamicparam block. The dynamicparam block must return either $null, or an object with type [System.Management.Automation.RuntimeDefinedParameterDictionary]. + El objeto "{0}" es el tipo incorrecto que se devuelve del bloque dynamicparam. El bloque dynamicparam debe devolver $null o un objeto del tipo [System.Management.Automation.RuntimeDefinedParameterDictionary]. - The script block cannot be converted to an open generic type. Define an appropriate closed generic type, and then retry. + El bloque de script no se puede convertir en un tipo genérico abierto. Defina un tipo genérico cerrado adecuado y vuelva a intentarlo. - Cannot generate a PowerShell object for a ScriptBlock that starts a pipeline with an expression. + No se puede generar un objeto de PowerShell para un ScriptBlock que inicia una canalización con una expresión. - The value of the using variable '$using:{0}' cannot be retrieved because it has not been set in the local session. + No se puede recuperar el valor de la variable using "$using:{0}" porque no se ha establecido en la sesión local. - Cannot get the value of the Using expression '{0}' in the specified variable dictionary. When creating a PowerShell instance from a script block, the Using expression cannot contain an indexing operation or member-accessing operation. + No se puede obtener el valor de la expresión Using "{0}" en el diccionario de variables especificado. Al crear una instancia de PowerShell a partir de un bloque de script, la expresión Using no puede contener una operación de indexación ni una operación de acceso a miembros. - Compiled Script Block Dot Source + Origen de punto del bloque de script compilado - Script block '{0}' invocation into current scope will be disallowed in Constrained Language mode. Script language mode: {1}, Context language mode: {2}. + La invocación del bloque de script "{0}" en el ámbito actual no se permitirá en el modo de lenguaje restringido. Modo de lenguaje de script: {1}, modo de lenguaje de contexto: {2}. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/es/CimInstanceTypeAdapterResources.es.resx b/src/System.Management.Automation/resources/es/CimInstanceTypeAdapterResources.es.resx index 4f3fda63c2e..a27b1c0684f 100644 --- a/src/System.Management.Automation/resources/es/CimInstanceTypeAdapterResources.es.resx +++ b/src/System.Management.Automation/resources/es/CimInstanceTypeAdapterResources.es.resx @@ -118,10 +118,10 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot convert "{0}" to an object of type "{1}". + No se puede convertir "{0}" en un objeto de tipo "{1}". - "{0}" is a ReadOnly property. + "{0}" es una propiedad ReadOnly. {0} gets property name \ No newline at end of file diff --git a/src/System.Management.Automation/resources/es/ConsoleInfoErrorStrings.es.resx b/src/System.Management.Automation/resources/es/ConsoleInfoErrorStrings.es.resx index 2b7c8007e1e..7b58dc8bab2 100644 --- a/src/System.Management.Automation/resources/es/ConsoleInfoErrorStrings.es.resx +++ b/src/System.Management.Automation/resources/es/ConsoleInfoErrorStrings.es.resx @@ -118,36 +118,36 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Incorrect PowerShell version {0}. PowerShell version {1} is supported on this computer. + Versión incorrecta de PowerShell {0}. En este equipo se admite la versión {1} de PowerShell. - The following errors occurred when loading console {0}: {1} + Se produjeron los siguientes errores al cargar la consola {0}: {1} - Cannot load PowerShell snap-in {0} because of the following error: {1} + No se puede cargar el complemento de {0} PowerShell debido al siguiente error: {1} - PowerShell snap-in "{0}" loaded with the following warnings: {1} + El complemento de PowerShell "{0}" se cargó con las siguientes advertencias: {1} - The PowerShell snap-in module {0} does not have the required PowerShell snap-in strong name {1}. + El módulo de complemento de PowerShell {0} no tiene el nombre seguro del complemento de PowerShell requerido {1}. - The cmdlet '{0}' should not occur more than once in PowerShell snap-in '{1}'. + El cmdlet "{0}" no debe aparecer más de una vez en el complemento de PowerShell "{1}". - PowerShell provider '{0}' should not occur more than once in PowerShell snap-in '{1}'. + El proveedor de PowerShell "{0}" no debe aparecer más de una vez en el complemento de PowerShell "{1}". - PowerShell {0} is not supported in the current console. PowerShell {1} is supported in the current console. + PowerShell {0} no se admite en la consola actual. PowerShell {1} se admite en la consola actual. - File {0} already exists and {1} was specified. + El archivo {0} ya existe y {1} se especificó. - The provided configuration file '{0}' does not exist. + El archivo de configuración proporcionado "{0}" no existe. - The provided configuration file '{0}' must have a .pssc file extension. + El archivo de configuración proporcionado "{0}" debe tener una extensión de archivo .pssc. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/es/FileSystemProviderStrings.es.resx b/src/System.Management.Automation/resources/es/FileSystemProviderStrings.es.resx index c7cfa089776..53e932534a4 100644 --- a/src/System.Management.Automation/resources/es/FileSystemProviderStrings.es.resx +++ b/src/System.Management.Automation/resources/es/FileSystemProviderStrings.es.resx @@ -118,240 +118,240 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Invoke Item + Invocar elemento - Item: {0} + Elemento: {0} - Remove File + Quitar archivo - Remove Directory + Quitar directorio - Copy File + Copiar archivo - Item: {0} Destination: {1} + Elemento: {0} Destino: {1} - Copy Directory + Copiar directorio - Rename File + Cambiar nombre de archivo - Rename Directory + Cambiar nombre de directorio - Item: {0} Destination: {1} + Elemento: {0} Destino: {1} - Move File + Mover archivo - Move Directory + Mover directorio - Item: {0} Destination: {1} + Elemento: {0} Destino: {1} - Set Property File + Establecer archivo de propiedades - Set Property Directory + Establecer directorio de propiedades - Item: {0} Property: {1} Value: {2} + Elemento: {0} Propiedad: {1} Valor: {2} - Clear Property File + Borrar archivo de propiedades - Clear Property Directory + Borrar directorio de propiedades - Item: {0} Property: {1} + Elemento: {0} Propiedad: {1} - Create File + Crear archivo - Create Directory + Crear directorio - Destination: {0} + Destino: {0} - Clear Content + Borrar contenido - Item: {0} + Elemento: {0} - Could not find item {0}. + No se pudo encontrar el elemento {0}. - Cannot remove item {0}: {1} + No se puede quitar el elemento {0}: {1} - Cannot restore attributes on item {0}: {1} + No se pueden restaurar atributos en el elemento {0}: {1} - An object at the specified path {0} does not exist. + No existe ningún objeto en la ruta de acceso especificada {0}. - Directory {0} cannot be removed because it is not empty. + El directorio {0} no se puede quitar porque no está vacío. - The type is not a known type for the file system. Only "file","directory" or "symboliclink" can be specified. + El tipo no es un tipo conocido para el sistema de archivos. Solo se puede especificar "file", "directory" o "symboliclink". - Cannot process the path because the specified path refers to an item that is outside the basePath. + No se puede procesar la ruta de acceso porque la ruta de acceso especificada hace referencia a un elemento que está fuera de basePath. - The specified drive root "{0}" either does not exist, or it is not a folder. + La raíz de unidad especificada "{0}" no existe o no es una carpeta. - An item with the specified name {0} already exists. + Ya existe un elemento con el nombre especificado {0}. - A delimiter cannot be specified when reading the stream one byte at a time. + No se puede especificar un delimitador al leer la secuencia de un byte a la vez. - Cannot overwrite the item {0} with itself. + No se puede sobrescribir el elemento {0} consigo mismo. - Cannot rename the specified target, because it represents a path or device name. + No se puede cambiar el nombre del destino especificado porque representa una ruta de acceso o un nombre de dispositivo. - The property {0} does not exist or was not found. + La propiedad {0} no existe o no se encontró. - You do not have sufficient access rights to perform this operation or the item is hidden, system, or read only. + No tiene suficientes derechos de acceso para realizar esta operación o el elemento está oculto, el sistema o es de solo lectura. - The attribute cannot be set because attributes are not supported. Only the following attributes can be set: Archive, Hidden, Normal, ReadOnly, or System. + No se puede establecer el atributo porque no se admiten atributos. Solo se pueden establecer los atributos siguientes: Archive, Hidden, Normal, ReadOnly o System. - The property cannot be cleared because the property is not supported. Only the Attributes property can be cleared. + No se puede borrar la propiedad porque no se admite. Solo se puede borrar la propiedad Attributes. - Cannot process path '{0}' because the target represents a reserved device name. + No se puede procesar la ruta de acceso "{0}" porque el destino representa un nombre de dispositivo reservado. - Encoding not used when '-AsByteStream' specified. + No se usa la codificación cuando se especifica "-AsByteStream". - Cannot proceed with byte encoding. When using byte encoding the content must be of type byte. + No se puede continuar con la codificación de bytes. Cuando se usa la codificación de bytes, el contenido debe ser de tipo byte. - Cannot process the file because the file {0} was not found. + No se puede procesar el archivo {0} porque no se encontró. - Directory: + Directorio: - Cannot detect the encoding of the file. The specified encoding {0} is not supported when the content is read in reverse. + No se puede detectar la codificación del archivo. No se admite la codificación {0} especificada cuando el contenido se lee en orden inverso. - Could not open the alternate data stream '{0}' of the file '{1}'. + No se pudo abrir la secuencia de datos alternativos "{0}" del archivo "{1}". - Stream '{0}' of file '{1}'. + Stream "{0}" del archivo "{1}". - The Raw and Wait parameters cannot be specified in the same command. + Los parámetros Raw y Wait no se pueden especificar en el mismo comando. - To use the Persist switch parameter, the drive name must be supported by the operating system (for example, drive letters A-Z). + Para usar el parámetro de modificador Persist, el sistema operativo debe admitir el nombre de la unidad (por ejemplo, letras de unidad A a Z). - When you use the Persist parameter, the root must be a file system location on a remote computer. + Cuando se usa el parámetro Persist, la raíz debe ser una ubicación del sistema de archivos en un equipo remoto. - The '{0}' and '{1}' parameters cannot be specified in the same command. + Los parámetros "{0}" y "{1}" no se pueden especificar en el mismo comando. - A directory is required for the operation. The item '{0}' is not a directory. + Se requiere un directorio para la operación. El elemento "{0}" no es un directorio. - Create Junction + Crear unión - Create Symbolic Link + Crear vínculo simbólico - Administrator privilege required for this operation. + Privilegio de administrador necesario para esta operación. - Create Hard Link + Crear vínculo físico - A file is required for the operation. The item '{0}' is not a file. + Se requiere un archivo para la operación. El elemento "{0}" no es un archivo. - Hard links are not supported for the specified path. + No se admiten vínculos físicos para la ruta de acceso especificada. - Symbolic links are not supported for the specified path. + No se admiten vínculos simbólicos para la ruta de acceso especificada. Copiando {0} en {1} - Destination path {0} is a file that already exists on the target destination. + La ruta de acceso de {0} destino es un archivo que ya existe en el destino. - Failed to copy file {0} to remote target destination. + No se pudo copiar el archivo {0} en el destino remoto. De {0} a {1} - Cannot copy a directory '{0}' to file '{0}' + No se puede copiar un directorio "{0}" al archivo "{0}" - Failed to get directory {0} child items. + No se pudieron obtener los elementos secundarios del directorio {0}. - Failed to read remote file '{0}'. + No se pudo leer el archivo remoto "{0}". - Cannot validate if remote destination {0} is a file. + No se puede validar si el destino {0} remoto es un archivo. - Failed to create directory '{0}' on remote destination. + No se pudo crear el directorio "{0}" en el destino remoto. - Maximum size for drive has been exceeded: {0}. + Se superó el tamaño máximo de la unidad: {0}. - Cannot create link because the path already exists: {0}. + No se puede crear el vínculo porque la ruta de acceso ya existe: {0}. - Skip already-visited directory {0}. + Omitir el directorio ya visitado {0}. - Destination path cannot be a subdirectory of the source or the source itself: {0}. + La ruta de acceso de destino no puede ser un subdirectorio del origen ni del propio origen: {0}. - The target and path cannot be the same. + El destino y la ruta de acceso no pueden ser iguales. - Copied {0} of {1} files + Se copiaron {0} de {1} archivos - {0} of {1} ({2:0.0} MB/s) + {0} de {1} ({2:0.0} MB/s) - Removed {0} of {1} files + Se han quitado {0} los {1} archivos - {0} of {1} ({2:0.0} MB/s) + {0} de {1} ({2:0.0} MB/s) - Creating a junction requires an absolute path for the target. + La creación de una unión requiere una ruta de acceso absoluta para el destino. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/es/FormatAndOut_format_xxx.es.resx b/src/System.Management.Automation/resources/es/FormatAndOut_format_xxx.es.resx index 612afc99349..24fbbb69eaa 100644 --- a/src/System.Management.Automation/resources/es/FormatAndOut_format_xxx.es.resx +++ b/src/System.Management.Automation/resources/es/FormatAndOut_format_xxx.es.resx @@ -118,65 +118,65 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cmdlet parameters View and Property are mutually exclusive. + Los parámetros de cmdlet View y Property se excluyen mutuamente. - Cmdlet parameters AutoSize and Column are mutually exclusive. + Los parámetros AutoSize y Column del cmdlet son mutuamente excluyentes. - The view name {0} cannot be found. + No se encuentra el nombre de vista {0}. - The view name {0} cannot be found in the {1} formatting. + No se puede encontrar el nombre de vista{0} en el formato de {1}. {0} indicates one of the valid formating types such as Table, List, Wide or Custom. - There are no existing {0} views for {1} objects. + No hay vistas existentes {0} para los {1} objetos. - The view name {0} cannot be found. Specify one of the following {1} views and try again: {2}. + No se encuentra el nombre de vista {0}. Especifique una de las siguientes vistas {1} y vuelva a intentarlo: {2}. - Try using one of these other format cmdlets: + Pruebe a usar uno de estos otros cmdlets de formato: Prefix text to suggest user to use one of the valid view names. {0}: - The following object supports IEnumerable: + El objeto siguiente admite IEnumerable: - The IEnumerable contains no objects. + IEnumerable no contiene objetos. - The IEnumerable contains the following object: + IEnumerable contiene el siguiente objeto: - The IEnumerable contains the following {0} objects: + IEnumerable contiene los objetos siguientes {0} : - Unknown class Id {0}. + Id. de clase desconocido {0}. - The type {0} for property {1} is not valid. + El tipo {0} de la propiedad {1} no es válido. - The value of the {0} data member cannot be null. + El valor del miembro de datos {0} no puede ser null. - The object type is not recognized. + No se reconoce el tipo de objeto. - Failed to create object with class Id {0}. + No se pudo crear el objeto con el id. de clase {0}. - The {0} property is recursive. + La propiedad {0} es recursiva. - Failed to evaluate expression "{0}". + No se pudo evaluar la expresión "{0}". - Failed to interpret format string "{0}". + No se pudo interpretar la cadena de formato "{0}". \ No newline at end of file diff --git a/src/System.Management.Automation/resources/es/FormatAndOut_out_xxx.es.resx b/src/System.Management.Automation/resources/es/FormatAndOut_out_xxx.es.resx index 94f22248141..488d65cc076 100644 --- a/src/System.Management.Automation/resources/es/FormatAndOut_out_xxx.es.resx +++ b/src/System.Management.Automation/resources/es/FormatAndOut_out_xxx.es.resx @@ -118,21 +118,21 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - <SPACE> next page; <CR> next line; Q quit + <SPACE> página siguiente; <CR> siguiente línea; Q salir - The value of LineOutput should not be null. + El valor de LineOutput no debe ser nulo. - The lineOutput type {0} was not expected; LineOutput expects type {1}. + No se esperaba el tipo lineOutput {0}; LineOutput espera el tipo {1}. - The object of type "{0}" is not valid or not in the correct sequence. This is likely caused by a user-specified "{1}" command which is conflicting with the default formatting. + El objeto de tipo "{0}" no es válido o no está en la secuencia correcta. Es probable que esto se deba a un comando "{1}" especificado por el usuario que está en conflicto con el formato predeterminado. - Cannot open file "{0}". + No se puede abrir el archivo "{0}". - Output to File + Salida a archivo \ No newline at end of file diff --git a/src/System.Management.Automation/resources/es/GetErrorText.es.resx b/src/System.Management.Automation/resources/es/GetErrorText.es.resx index a4acd582337..b758f8ecdad 100644 --- a/src/System.Management.Automation/resources/es/GetErrorText.es.resx +++ b/src/System.Management.Automation/resources/es/GetErrorText.es.resx @@ -118,30 +118,30 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot load a resource with base name "{0}". + No se puede cargar un recurso con el nombre base "{0}". - Cannot load a resource string with ID "{0}". + No se puede cargar una cadena de recursos con el identificador "{0}". - Running commands is prevented by Stop policy settings. + La configuración de directiva de detención impide la ejecución de comandos. - Cannot retrieve the message "{0}" "{1}" "{2}" because an assembly was not registered. + No se puede recuperar el mensaje "{0}" "{1}" "{2}" porque no se registró un ensamblado. - Cannot retrieve the message "{0}" "{1}" "{2}". A template string format is not valid in template string "{3}". + No se puede recuperar el mensaje "{0}" "{1}" "{2}". Un formato de cadena de plantilla no es válido en la cadena de plantilla "{3}". - Cannot retrieve the message "{0}" "{1}" "{2}". A template string exists, but its value is empty or blank. + No se puede recuperar el mensaje "{0}" "{1}" "{2}". Existe una cadena de plantilla, pero su valor está vacío o en blanco. - The pipeline has been stopped. + La canalización se ha detenido. - The script failed due to call depth overflow. + Error del script debido a un desbordamiento de profundidad de llamada. - The pipeline failed due to call depth overflow. + Error en la canalización debido a un desbordamiento de profundidad de llamada. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/fr/AutomationExceptions.fr.resx b/src/System.Management.Automation/resources/fr/AutomationExceptions.fr.resx index 18d6f475628..4799a780b5e 100644 --- a/src/System.Management.Automation/resources/fr/AutomationExceptions.fr.resx +++ b/src/System.Management.Automation/resources/fr/AutomationExceptions.fr.resx @@ -118,93 +118,93 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot process argument because the value of argument "{0}" is not valid. Change the value of the "{0}" argument and run the operation again. + Impossible de traiter l’argument, car la valeur de l’argument «{0}» n’est pas valide. Modifiez la valeur de l'argument « {0} » et relancez l'opération. - Cannot process argument because the value of parameter "{0}" is not valid. Valid values are "Global", "Local", or "Script", or a number relative to the current scope (0 through the number of scopes where 0 is the current scope and 1 is its parent). Change the value of the "{0}" parameter and run the operation again. + Impossible de traiter l’argument, car la valeur du paramètre «{0}» n’est pas valide. Les valeurs valides sont « Global », « Local » ou « Script », ou un nombre relatif à l'étendue actuelle (0 jusqu'au nombre d'étendues, où 0 est l'étendue actuelle et 1 son parent). Modifiez la valeur du paramètre «{0}» et recommencez l’opération. - Cannot process argument because the value of argument "{0}" is null. Change the value of argument "{0}" to a non-null value. + Impossible de traiter l'argument car sa valeur {0} est nulle. Modifiez la valeur de l'argument "{0}" en une valeur non nulle. - Cannot process argument because the value of argument "{0}" is out of range. Change argument "{0}" to a value that is within range. + Impossible de traiter l’argument, car la valeur de l’argument «{0}» est hors limites. Remplacez l’argument «{0}» par une valeur comprise dans la plage. - Cannot perform operation because operation "{0}" is not valid. Remove operation "{0}", or investigate why it is not valid. + Impossible d’effectuer l’opération, car l’opération «{0}» n’est pas valide. Supprimez l’opération «{0}» ou déterminez pourquoi elle n’est pas valide. - Cannot perform operation because operation "{0}" is not implemented. + Impossible d’effectuer l’opération, car l’opération «{0}» n’est pas implémentée. - Cannot perform operation because operation "{0}" is not supported. + Impossible d’effectuer l’opération, car l’opération «{0}» n’est pas prise en charge. - Cannot perform operation because object "{0}" has already been disposed. + Impossible d’effectuer l’opération, car l’objet «{0}» a déjà été supprimé. - The script block cannot be invoked because it contains more than one clause. The Invoke() method can only be used on script blocks that contain a single clause. + Impossible d’appeler le bloc de script, car il contient plusieurs clauses. La méthode Invoke() ne peut être utilisée que sur les blocs de script qui contiennent une seule clause. - The script block cannot be converted because it contains more than one clause. Expressions or control structures are not permitted. Verify that the script block contains exactly one pipeline or command. + Impossible de convertir le bloc de script, car il contient plusieurs clauses. Les expressions ou les structures de contrôle ne sont pas autorisées. Vérifiez que le bloc de script contient exactement un pipeline ou une commande. - An empty script block cannot be converted. Verify that the script block contains exactly one pipeline or command. + Impossible de convertir un bloc de script vide. Vérifiez que le bloc de script contient exactement un pipeline ou une commande. - Only a script block that contains exactly one pipeline or command can be converted. Expressions or control structures are not permitted. Verify that the script block contains exactly one pipeline or command. + Seul un bloc de script qui contient exactement un pipeline ou une commande peut être converti. Les expressions ou les structures de contrôle ne sont pas autorisées. Vérifiez que le bloc de script contient exactement un pipeline ou une commande. - A script block that contains a top-level trap statement cannot be converted. + Impossible de convertir un bloc de script qui contient une instruction trap de niveau supérieur. - Cannot generate a PowerShell object for a ScriptBlock dereferencing variables undeclared in the param(...) block. Name of undeclared variable: {0}. + Impossible de générer un objet PowerShell pour un ScriptBlock déréférençant des variables non déclarées dans le bloc param(...). Nom de la variable non déclarée : {0}. - Cannot generate a PowerShell object for a ScriptBlock evaluating non-constant expressions. Non-constant expression: {0}. + Impossible de générer un objet PowerShell pour un ScriptBlock évaluant des expressions non constantes. Expression non constante : {0}. - Cannot generate a PowerShell object for a ScriptBlock evaluating dynamic expressions. Dynamic expression: {0}. + Impossible de générer un objet PowerShell pour un ScriptBlock évaluant des expressions dynamiques. Expression dynamique : {0}. - Cannot generate a PowerShell object for a ScriptBlock that tries to pass other script blocks inside argument values. + Impossible de générer un objet PowerShell pour un ScriptBlock qui tente de passer d’autres blocs de script à l’intérieur des valeurs d’argument. - Cannot generate a PowerShell object for a ScriptBlock which invokes pipelines, commands or functions to evaluate arguments of the main pipeline. + Impossible de générer un objet PowerShell pour un ScriptBlock qui appelle des pipelines, des commandes ou des fonctions pour évaluer les arguments du pipeline principal. - Cannot generate a PowerShell object for a ScriptBlock that uses dot sourcing. + Impossible de générer un objet PowerShell pour un ScriptBlock qui utilise l’approvisionnement par points. - Cannot generate a PowerShell object for a ScriptBlock that invokes other script blocks. + Impossible de générer un objet PowerShell pour un ScriptBlock qui appelle d’autres blocs de script. - The script block cannot be converted to a PowerShell object because it contains forbidden redirection operators. + Impossible de convertir le bloc de script en objet PowerShell, car il contient des opérateurs de redirection interdits. - Cannot generate a PowerShell object for a ScriptBlock that does not have an associated operation context. + Impossible de générer un objet PowerShell pour un ScriptBlock qui n’a pas de contexte d’opération associé. - The command was stopped by the user. + La commande a été arrêtée par l’utilisateur. - Object "{0}" is the wrong type to return from the dynamicparam block. The dynamicparam block must return either $null, or an object with type [System.Management.Automation.RuntimeDefinedParameterDictionary]. + L'objet "{0}" n'est pas du type approprié pour être renvoyé par le bloc dynamicparam. Le bloc dynamicparam doit renvoyer soit $null, soit un objet de type [System.Management.Automation.RuntimeDefinedParameterDictionary]. - The script block cannot be converted to an open generic type. Define an appropriate closed generic type, and then retry. + Impossible de convertir le bloc de script en type générique ouvert. Définissez un type générique fermé approprié, puis réessayez. - Cannot generate a PowerShell object for a ScriptBlock that starts a pipeline with an expression. + Impossible de générer un objet PowerShell pour un ScriptBlock qui démarre un pipeline avec une expression. - The value of the using variable '$using:{0}' cannot be retrieved because it has not been set in the local session. + La valeur de la variable d'utilisation '$using:{0}' ne peut pas être récupérée car elle n'a pas été définie dans la session locale. - Cannot get the value of the Using expression '{0}' in the specified variable dictionary. When creating a PowerShell instance from a script block, the Using expression cannot contain an indexing operation or member-accessing operation. + Impossible d’obtenir la valeur de l’expression Using '{0}' dans le dictionnaire de variables spécifié. Lors de la création d’une instance PowerShell à partir d’un bloc de script, l’expression Using ne peut pas contenir d’opération d’indexation ou d’accès aux membres. - Compiled Script Block Dot Source + Source point de bloc de script compilée - Script block '{0}' invocation into current scope will be disallowed in Constrained Language mode. Script language mode: {1}, Context language mode: {2}. + L’appel du bloc de script «{0}» dans l’étendue actuelle ne sera pas autorisé en mode langue contrainte. Mode de langage de script : {1}, mode de langage de contexte : {2}. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/fr/CimInstanceTypeAdapterResources.fr.resx b/src/System.Management.Automation/resources/fr/CimInstanceTypeAdapterResources.fr.resx index 4f3fda63c2e..2d171c53e3c 100644 --- a/src/System.Management.Automation/resources/fr/CimInstanceTypeAdapterResources.fr.resx +++ b/src/System.Management.Automation/resources/fr/CimInstanceTypeAdapterResources.fr.resx @@ -118,10 +118,10 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot convert "{0}" to an object of type "{1}". + Impossible de convertir « {0} » en un objet de type « {1} ». - "{0}" is a ReadOnly property. + « {0} » est une propriété ReadOnly. {0} gets property name \ No newline at end of file diff --git a/src/System.Management.Automation/resources/fr/ConsoleInfoErrorStrings.fr.resx b/src/System.Management.Automation/resources/fr/ConsoleInfoErrorStrings.fr.resx index 2b7c8007e1e..7bf09c43822 100644 --- a/src/System.Management.Automation/resources/fr/ConsoleInfoErrorStrings.fr.resx +++ b/src/System.Management.Automation/resources/fr/ConsoleInfoErrorStrings.fr.resx @@ -118,36 +118,36 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Incorrect PowerShell version {0}. PowerShell version {1} is supported on this computer. + Version de PowerShell incorrecte {0}. La version de PowerShell {1} est prise en charge sur cet ordinateur. - The following errors occurred when loading console {0}: {1} + Les erreurs suivantes se sont produites lors du chargement de la console {0} : {1} - Cannot load PowerShell snap-in {0} because of the following error: {1} + Nous ne pouvons pas charger le composant logiciel enfichable PowerShell {0} en raison de l’erreur suivante : {1} - PowerShell snap-in "{0}" loaded with the following warnings: {1} + Le composant logiciel enfichable PowerShell « {0} » a été chargé avec les avertissements suivants : {1} - The PowerShell snap-in module {0} does not have the required PowerShell snap-in strong name {1}. + Le module du composant logiciel enfichable PowerShell {0} ne dispose pas du nom fort requis du composant logiciel enfichable PowerShell {1}. - The cmdlet '{0}' should not occur more than once in PowerShell snap-in '{1}'. + La cmdlet « {0} » ne doit pas apparaître plus d’une fois dans le composant logiciel enfichable PowerShell « {1} ». - PowerShell provider '{0}' should not occur more than once in PowerShell snap-in '{1}'. + Le fournisseur PowerShell « {0} » ne doit pas apparaître plus d’une fois dans le composant logiciel enfichable PowerShell « {1} ». - PowerShell {0} is not supported in the current console. PowerShell {1} is supported in the current console. + PowerShell {0} n’est pas pris en charge dans la console actuelle. PowerShell {1} n’est pas pris en charge dans la console actuelle. - File {0} already exists and {1} was specified. + Le fichier {0} existe déjà et {1} a été spécifié. - The provided configuration file '{0}' does not exist. + Le fichier config fourni « {0} » n’existe pas. - The provided configuration file '{0}' must have a .pssc file extension. + Le fichier config « {0} » fourni doit avoir une extension .pssc. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/fr/EnumExpressionEvaluatorStrings.fr.resx b/src/System.Management.Automation/resources/fr/EnumExpressionEvaluatorStrings.fr.resx index 8faa9a881bd..4ba9589ecfb 100644 --- a/src/System.Management.Automation/resources/fr/EnumExpressionEvaluatorStrings.fr.resx +++ b/src/System.Management.Automation/resources/fr/EnumExpressionEvaluatorStrings.fr.resx @@ -118,31 +118,31 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The input expression must not be empty. Specify at least one identifier name in each input expression. + L’expression d’entrée ne doit pas être vide. Spécifiez au moins un nom d’identificateur dans chaque expression d’entrée. - Unable to match an empty identifier name to a valid enumerator name. Specify one of the following enumerator names and retry: {0}. + Nous ne pouvons pas faire correspondre le nom d’identificateur vide à un nom d’énumérateur valide. Spécifiez l’un des noms d’énumérateur suivants et réessayez : {0}. - The generic type specified for the expression must represent an enum. Specify a valid enum type. + Le type générique spécifié pour l’expression doit représenter une énumération. Spécifiez un type d’énumération valide. - The identifier name {0} cannot be processed because it is either too similar or identical to the following enumerator names: {1}. Use a more specific identifier name. + Le nom d’identificateur {0} ne peut pas être traité, car il est trop semblable ou identique aux noms d’énumérateur suivants : {1}. Utilisez un nom d’identificateur plus spécifique. - Unable to match the identifier name {0} to a valid enumerator name. Specify one of the following enumerator names and try again: + Nous ne pouvons pas faire correspondre le nom d’identificateur {0} à un nom d’énumérateur valide. Spécifiez l’un des noms d’énumérateur suivants et réessayez : {1} - Use of parentheses is not valid in the expression because identifier grouping is not allowed. Try removing the parentheses, or if a subexpression is enclosed, try expanding the expression. + L’utilisation de parenthèses n’est pas valide dans l’expression, car le regroupement des identificateurs n’est pas autorisé. Essayez de supprimer les parenthèses ou, en cas d’inclusion d’une sous-expression, essayez de développer l’expression. - Unable to parse the expression due to an unexpected token. Only an OR (,) operator or AND (+) operator is expected after an identifier name. + Nous ne pouvons pas analyser l’expression en raison d’un jeton inattendu. Seul un opérateur OR (,) ou AND (+) est attendu après un nom d’identificateur. - Unable to parse the expression due to an unexpected token after a NOT (!) operator. An identifier name is expected after a NOT (!) operator. + Nous ne pouvons pas analyser l’expression en raison d’un jeton inattendu après un opérateur NOT (!). Un nom d’identificateur est attendu après un opérateur NOT (!). - Unable to parse the expression due to an unexpected token. An identifier name or a NOT (!) operator is expected at the start of the expression, or after an OR (,) operator or an AND (+) operator. Also, an expression must not end with an OR (,), AND (+) or NOT (!) operator. + Nous ne pouvons pas analyser l’expression en raison d’un jeton inattendu. Un nom d’identificateur ou un opérateur NOT (!) est attendu au début de l’expression, ou après un opérateur OR (,) ou un opérateur AND (+). De plus, une expression ne doit pas se terminer par un opérateur OR (,), AND (+) ou NOT (!). \ No newline at end of file diff --git a/src/System.Management.Automation/resources/fr/FormatAndOut_format_xxx.fr.resx b/src/System.Management.Automation/resources/fr/FormatAndOut_format_xxx.fr.resx index 612afc99349..28bd543c558 100644 --- a/src/System.Management.Automation/resources/fr/FormatAndOut_format_xxx.fr.resx +++ b/src/System.Management.Automation/resources/fr/FormatAndOut_format_xxx.fr.resx @@ -118,65 +118,65 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cmdlet parameters View and Property are mutually exclusive. + Les paramètres View et Property du cmdlet s’excluent mutuellement. - Cmdlet parameters AutoSize and Column are mutually exclusive. + Les paramètres AutoSize et Column de l’applet de commande s’excluent mutuellement. - The view name {0} cannot be found. + Le nom de la vue {0} est introuvable. - The view name {0} cannot be found in the {1} formatting. + Le nom de la vue {0} est introuvable dans la mise en forme {1}. {0} indicates one of the valid formating types such as Table, List, Wide or Custom. - There are no existing {0} views for {1} objects. + Il n’existe aucune vue {0} existante pour les objets {1}. - The view name {0} cannot be found. Specify one of the following {1} views and try again: {2}. + Le nom de la vue {0} est introuvable. Spécifiez l’une des vues {1} suivantes et réessayez : {2}. - Try using one of these other format cmdlets: + Essayez d’utiliser l’une de ces autres cmdlets de mise en forme : Prefix text to suggest user to use one of the valid view names. - {0}: + {0} : - The following object supports IEnumerable: + L’objet suivant prend en charge IEnumerable : - The IEnumerable contains no objects. + IEnumerable ne contient aucun objet. - The IEnumerable contains the following object: + IEnumerable contient l’objet suivant : - The IEnumerable contains the following {0} objects: + IEnumerable contient les objets {0} suivants : - Unknown class Id {0}. + ID de classe inconnu {0}. - The type {0} for property {1} is not valid. + Le type {0} pour la propriété {1} n’est pas valide. - The value of the {0} data member cannot be null. + La valeur du membre de données {0} ne peut pas être null. - The object type is not recognized. + Le type d’objet n’est pas reconnu. - Failed to create object with class Id {0}. + Échec de la création de l’objet avec l’ID de classe {0}. - The {0} property is recursive. + La propriété {0} est récursive. - Failed to evaluate expression "{0}". + Échec de l’évaluation de l’expression « {0} ». - Failed to interpret format string "{0}". + Échec de l’interprétation de la chaîne de format « {0} ». \ No newline at end of file diff --git a/src/System.Management.Automation/resources/fr/FormatAndOut_out_xxx.fr.resx b/src/System.Management.Automation/resources/fr/FormatAndOut_out_xxx.fr.resx index 94f22248141..5f164ccb7e3 100644 --- a/src/System.Management.Automation/resources/fr/FormatAndOut_out_xxx.fr.resx +++ b/src/System.Management.Automation/resources/fr/FormatAndOut_out_xxx.fr.resx @@ -118,21 +118,21 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - <SPACE> next page; <CR> next line; Q quit + <SPACE> page suivante, <CR> ligne suivante, Q quitter - The value of LineOutput should not be null. + La valeur de LineOutput ne doit pas être nulle. - The lineOutput type {0} was not expected; LineOutput expects type {1}. + Le type lineOutput {0} n’était pas prévu, LineOutput attend le type {1}. - The object of type "{0}" is not valid or not in the correct sequence. This is likely caused by a user-specified "{1}" command which is conflicting with the default formatting. + L’objet de type « {0} » n’est pas valide ou n’est pas dans la séquence correcte. Cela est probablement dû à une commande « {1} » spécifiée par l’utilisateur, qui est en conflit avec la mise en forme par défaut. - Cannot open file "{0}". + Nous ne pouvons pas ouvrir le fichier « {0} ». - Output to File + Sortie vers un fichier \ No newline at end of file diff --git a/src/System.Management.Automation/resources/fr/GetErrorText.fr.resx b/src/System.Management.Automation/resources/fr/GetErrorText.fr.resx index a4acd582337..4083b9e6e69 100644 --- a/src/System.Management.Automation/resources/fr/GetErrorText.fr.resx +++ b/src/System.Management.Automation/resources/fr/GetErrorText.fr.resx @@ -118,30 +118,30 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot load a resource with base name "{0}". + Impossible de charger une ressource avec le nom de base « {0} ». - Cannot load a resource string with ID "{0}". + Impossible de charger une chaîne de ressources avec l’ID « {0} ». - Running commands is prevented by Stop policy settings. + L’exécution des commandes est empêchée par les paramètres de stratégie Stop. - Cannot retrieve the message "{0}" "{1}" "{2}" because an assembly was not registered. + Impossible de récupérer le message « {0} » « {1} » « {2} » car un assembly n’a pas été inscrit. - Cannot retrieve the message "{0}" "{1}" "{2}". A template string format is not valid in template string "{3}". + Impossible de récupérer le message « {0} » « {1} » « {2} ». Le format de chaîne de modèle n’est pas valide dans la chaîne de modèle « {3} ». - Cannot retrieve the message "{0}" "{1}" "{2}". A template string exists, but its value is empty or blank. + Impossible de récupérer le message « {0} » « {1} » « {2} ». Une chaîne de modèle existe, mais sa valeur est vide ou blanche. - The pipeline has been stopped. + Le pipeline a été arrêté. - The script failed due to call depth overflow. + Le script a échoué en raison d’un dépassement de la profondeur des appels. - The pipeline failed due to call depth overflow. + Le pipeline a échoué en raison d’un dépassement de la profondeur des appels. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/it/ConsoleInfoErrorStrings.it.resx b/src/System.Management.Automation/resources/it/ConsoleInfoErrorStrings.it.resx index 2b7c8007e1e..aabd4ae912f 100644 --- a/src/System.Management.Automation/resources/it/ConsoleInfoErrorStrings.it.resx +++ b/src/System.Management.Automation/resources/it/ConsoleInfoErrorStrings.it.resx @@ -118,36 +118,36 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Incorrect PowerShell version {0}. PowerShell version {1} is supported on this computer. + La versione di PowerShell {0} non è corretta. In questo computer è supportata la versione di PowerShell {1}. - The following errors occurred when loading console {0}: {1} + Durante il caricamento della console {0} si sono verificati gli errori seguenti: {1} - Cannot load PowerShell snap-in {0} because of the following error: {1} + Non è possibile caricare lo snap-in PowerShell {0} a causa dell'errore seguente: {1} - PowerShell snap-in "{0}" loaded with the following warnings: {1} + Lo snap-in PowerShell "{0}" è stato caricato con i seguenti avvisi: {1} - The PowerShell snap-in module {0} does not have the required PowerShell snap-in strong name {1}. + Il modulo snap-in PowerShell {0} non dispone del nome sicuro dello snap-in PowerShell richiesto {1}. - The cmdlet '{0}' should not occur more than once in PowerShell snap-in '{1}'. + Il cmdlet ''{0}'' non deve verificarsi più di una volta nello snap-in di PowerShell ''{1}''. - PowerShell provider '{0}' should not occur more than once in PowerShell snap-in '{1}'. + Il provider PowerShell ''{0}'' non deve essere presente più di una volta nello snap-in PowerShell ''{1}''. - PowerShell {0} is not supported in the current console. PowerShell {1} is supported in the current console. + PowerShell {0} non è supportato nella console corrente. PowerShell {1} è supportato nella console corrente. - File {0} already exists and {1} was specified. + Il file {0} esiste già e {1} è stato specificato. - The provided configuration file '{0}' does not exist. + Il file di configurazione ''{0}'' specificato non esiste. - The provided configuration file '{0}' must have a .pssc file extension. + Il file di configurazione ''{0}'' specificato deve avere un'estensione pssc. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/it/FormatAndOut_format_xxx.it.resx b/src/System.Management.Automation/resources/it/FormatAndOut_format_xxx.it.resx index 612afc99349..46bf3cf4c84 100644 --- a/src/System.Management.Automation/resources/it/FormatAndOut_format_xxx.it.resx +++ b/src/System.Management.Automation/resources/it/FormatAndOut_format_xxx.it.resx @@ -118,65 +118,65 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cmdlet parameters View and Property are mutually exclusive. + I parametri cmdlet View e Property si escludono a vicenda. - Cmdlet parameters AutoSize and Column are mutually exclusive. + I parametri AutoSize e Column del cmdlet si escludono a vicenda. - The view name {0} cannot be found. + Non è possibile trovare il nome della vista {0}. - The view name {0} cannot be found in the {1} formatting. + Non é possibile trovare il nome della visualizzazione {0} nella formattazione {1}. {0} indicates one of the valid formating types such as Table, List, Wide or Custom. - There are no existing {0} views for {1} objects. + Non sono presenti visualizzazioni {0} per gli oggetti {1}. - The view name {0} cannot be found. Specify one of the following {1} views and try again: {2}. + Non è possibile trovare il nome della vista {0}. Specificare una delle visualizzazioni {1} seguenti e riprovare: {2}. - Try using one of these other format cmdlets: + Provare a usare uno degli altri cmdlet di formato seguenti: Prefix text to suggest user to use one of the valid view names. {0}: - The following object supports IEnumerable: + L'oggetto seguente supporta IEnumerable: - The IEnumerable contains no objects. + IEnumerable non contiene oggetti. - The IEnumerable contains the following object: + L'IEnumerable contiene l'oggetto seguente: - The IEnumerable contains the following {0} objects: + IEnumerable contiene gli oggetti {0} seguenti: - Unknown class Id {0}. + ID classe sconosciuto {0}. - The type {0} for property {1} is not valid. + Il tipo {0} per la proprietà {1} non è valido. - The value of the {0} data member cannot be null. + Il valore del membro dati {0} non può essere Null. - The object type is not recognized. + Tipo di oggetto non riconosciuto. - Failed to create object with class Id {0}. + Non è possibile creare l'oggetto con ID classe {0}. - The {0} property is recursive. + La proprietà {0} è ricorsiva. - Failed to evaluate expression "{0}". + Non è stato possibile valutare l'espressione "{0}". - Failed to interpret format string "{0}". + Non è possibile interpretare la stringa di formato "{0}". \ No newline at end of file diff --git a/src/System.Management.Automation/resources/ja/CimInstanceTypeAdapterResources.ja.resx b/src/System.Management.Automation/resources/ja/CimInstanceTypeAdapterResources.ja.resx index 4f3fda63c2e..fdae9c65f8d 100644 --- a/src/System.Management.Automation/resources/ja/CimInstanceTypeAdapterResources.ja.resx +++ b/src/System.Management.Automation/resources/ja/CimInstanceTypeAdapterResources.ja.resx @@ -118,10 +118,10 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot convert "{0}" to an object of type "{1}". + "{0}" を型 "{1}" のオブジェクトに変換できません。 - "{0}" is a ReadOnly property. + "{0}" は読み取り専用プロパティです。 {0} gets property name \ No newline at end of file diff --git a/src/System.Management.Automation/resources/ja/ConsoleInfoErrorStrings.ja.resx b/src/System.Management.Automation/resources/ja/ConsoleInfoErrorStrings.ja.resx index 2b7c8007e1e..2f36be4ad19 100644 --- a/src/System.Management.Automation/resources/ja/ConsoleInfoErrorStrings.ja.resx +++ b/src/System.Management.Automation/resources/ja/ConsoleInfoErrorStrings.ja.resx @@ -118,36 +118,36 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Incorrect PowerShell version {0}. PowerShell version {1} is supported on this computer. + PowerShell バージョン {0} が正しくありません。このコンピューターでは、PowerShell バージョン {1} がサポートされています。 - The following errors occurred when loading console {0}: {1} + コンソール {0} の読み込み中に次のエラーが発生しました: {1} - Cannot load PowerShell snap-in {0} because of the following error: {1} + 次のエラーのため、PowerShell スナップイン {0} を読み込めません: {1} - PowerShell snap-in "{0}" loaded with the following warnings: {1} + PowerShell スナップイン "{0}" が読み込まれ、次の警告が表示されます: {1} - The PowerShell snap-in module {0} does not have the required PowerShell snap-in strong name {1}. + PowerShell スナップイン モジュール {0} には、必要な PowerShell スナップインの厳密な名前 {1} がありません。 - The cmdlet '{0}' should not occur more than once in PowerShell snap-in '{1}'. + コマンドレット '{0}' は、PowerShell スナップイン '{1}' で複数回実行しないでください。 - PowerShell provider '{0}' should not occur more than once in PowerShell snap-in '{1}'. + PowerShell スナップイン '{1}' では、PowerShell プロバイダー '{0}' を複数回使用しないでください。 - PowerShell {0} is not supported in the current console. PowerShell {1} is supported in the current console. + PowerShell {0} は、現在のコンソールではサポートされていません。PowerShell {1} は、現在のコンソールでサポートされています。 - File {0} already exists and {1} was specified. + ファイル {0} は既に存在し、{1} が指定されました。 - The provided configuration file '{0}' does not exist. + 指定された構成ファイル '{0}' は存在しません。 - The provided configuration file '{0}' must have a .pssc file extension. + 指定された構成ファイル '{0}' には .pssc ファイル拡張子が必要です。 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/ja/FormatAndOut_out_xxx.ja.resx b/src/System.Management.Automation/resources/ja/FormatAndOut_out_xxx.ja.resx index 94f22248141..c372e8e43a1 100644 --- a/src/System.Management.Automation/resources/ja/FormatAndOut_out_xxx.ja.resx +++ b/src/System.Management.Automation/resources/ja/FormatAndOut_out_xxx.ja.resx @@ -118,21 +118,21 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - <SPACE> next page; <CR> next line; Q quit + <SPACE> 次のページ; <CR> 次の行; Q 終了 - The value of LineOutput should not be null. + LineOutput の値を null 値にすることはできません。 - The lineOutput type {0} was not expected; LineOutput expects type {1}. + lineOutput 型 {0} は予期されていませんでした。LineOutput には型 {1} が必要です。 - The object of type "{0}" is not valid or not in the correct sequence. This is likely caused by a user-specified "{1}" command which is conflicting with the default formatting. + "{0}" 型のオブジェクトが無効であるか、正しい順序ではありません。これは、既定の書式設定と競合するユーザー指定の "{1}" コマンドが原因である可能性があります。 - Cannot open file "{0}". + ファイル "{0}” を開けません。 - Output to File + ファイルへの出力 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/ja/GetErrorText.ja.resx b/src/System.Management.Automation/resources/ja/GetErrorText.ja.resx index a4acd582337..884ce4b95a5 100644 --- a/src/System.Management.Automation/resources/ja/GetErrorText.ja.resx +++ b/src/System.Management.Automation/resources/ja/GetErrorText.ja.resx @@ -118,30 +118,30 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot load a resource with base name "{0}". + ベース名が "{0}" のリソースを読み込めません。 - Cannot load a resource string with ID "{0}". + ID "{0}" のリソース文字列を読み込めません。 - Running commands is prevented by Stop policy settings. + コマンドの実行は、ポリシー設定の停止によって禁止されています。 - Cannot retrieve the message "{0}" "{1}" "{2}" because an assembly was not registered. + アセンブリが登録されていないため、メッセージ "{0}" "{1}" "{2}" を取得できません。 - Cannot retrieve the message "{0}" "{1}" "{2}". A template string format is not valid in template string "{3}". + メッセージ "{0}" "{1}" "{2}" を取得できません。テンプレート文字列形式は、テンプレート文字列 "{3}" では無効です。 - Cannot retrieve the message "{0}" "{1}" "{2}". A template string exists, but its value is empty or blank. + メッセージ "{0}" "{1}" "{2}" を取得できません。テンプレート文字列は存在しますが、その値が空または空白です。 - The pipeline has been stopped. + パイプラインが停止されました。 - The script failed due to call depth overflow. + 呼び出し深度オーバーフローのため、スクリプトが失敗しました。 - The pipeline failed due to call depth overflow. + 深度オーバーフローの呼び出しにより、パイプラインが失敗しました。 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/pl/CimInstanceTypeAdapterResources.pl.resx b/src/System.Management.Automation/resources/pl/CimInstanceTypeAdapterResources.pl.resx index 4f3fda63c2e..a028c027db9 100644 --- a/src/System.Management.Automation/resources/pl/CimInstanceTypeAdapterResources.pl.resx +++ b/src/System.Management.Automation/resources/pl/CimInstanceTypeAdapterResources.pl.resx @@ -118,10 +118,10 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot convert "{0}" to an object of type "{1}". + Nie można przekonwertować elementu „{0}” na obiekt typu „{1}”. - "{0}" is a ReadOnly property. + „{0}” jest właściwością ReadOnly. {0} gets property name \ No newline at end of file diff --git a/src/System.Management.Automation/resources/pl/ConsoleInfoErrorStrings.pl.resx b/src/System.Management.Automation/resources/pl/ConsoleInfoErrorStrings.pl.resx index 2b7c8007e1e..c46cb2e573f 100644 --- a/src/System.Management.Automation/resources/pl/ConsoleInfoErrorStrings.pl.resx +++ b/src/System.Management.Automation/resources/pl/ConsoleInfoErrorStrings.pl.resx @@ -118,36 +118,36 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Incorrect PowerShell version {0}. PowerShell version {1} is supported on this computer. + Nieprawidłowa wersja programu PowerShell {0}. Wersja {1} programu PowerShell jest obsługiwana na tym komputerze. - The following errors occurred when loading console {0}: {1} + Podczas ładowania konsoli {0}wystąpiły następujące błędy: {1} - Cannot load PowerShell snap-in {0} because of the following error: {1} + Nie można załadować przystawki {0} programu PowerShell z powodu następującego błędu: {1} - PowerShell snap-in "{0}" loaded with the following warnings: {1} + Załadowano przystawkę programu PowerShell „{0}” z następującymi ostrzeżeniami: {1} - The PowerShell snap-in module {0} does not have the required PowerShell snap-in strong name {1}. + Moduł {0} przystawki programu PowerShell nie ma wymaganej silnej nazwy {1}przystawki programu PowerShell. - The cmdlet '{0}' should not occur more than once in PowerShell snap-in '{1}'. + Polecenie cmdlet „{0}” nie powinno występować więcej niż raz w przystawce programu PowerShell „{1}”. - PowerShell provider '{0}' should not occur more than once in PowerShell snap-in '{1}'. + Dostawca programu PowerShell „{0}” nie powinien występować więcej niż raz w przystawce programu PowerShell „{1}”. - PowerShell {0} is not supported in the current console. PowerShell {1} is supported in the current console. + Program PowerShell {0} nie jest obsługiwany w bieżącej konsoli. Program PowerShell {1} jest obsługiwany w bieżącej konsoli. - File {0} already exists and {1} was specified. + Plik {0} już istnieje i określono {1}. - The provided configuration file '{0}' does not exist. + Podany plik konfiguracji „{0}” nie istnieje. - The provided configuration file '{0}' must have a .pssc file extension. + Podany plik konfiguracji „{0}” musi mieć rozszerzenie pliku .pssc. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/pl/EnumExpressionEvaluatorStrings.pl.resx b/src/System.Management.Automation/resources/pl/EnumExpressionEvaluatorStrings.pl.resx index 8faa9a881bd..49e23c6dbf2 100644 --- a/src/System.Management.Automation/resources/pl/EnumExpressionEvaluatorStrings.pl.resx +++ b/src/System.Management.Automation/resources/pl/EnumExpressionEvaluatorStrings.pl.resx @@ -118,31 +118,31 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The input expression must not be empty. Specify at least one identifier name in each input expression. + Wyrażenie wejściowe nie może być puste. Określ co najmniej jedną nazwę identyfikatora w każdym wyrażeniu wejściowym. - Unable to match an empty identifier name to a valid enumerator name. Specify one of the following enumerator names and retry: {0}. + Nie można dopasować pustej nazwy identyfikatora do prawidłowej nazwy modułu wyliczającego. Określ jedną z następujących nazw modułu wyliczającego i ponów próbę: {0}. - The generic type specified for the expression must represent an enum. Specify a valid enum type. + Typ ogólny określony dla wyrażenia musi reprezentować wyliczenie. Określ prawidłowy wyliczany typ danych. - The identifier name {0} cannot be processed because it is either too similar or identical to the following enumerator names: {1}. Use a more specific identifier name. + Nie można przetworzyć nazwy {0} identyfikatora, ponieważ jest ona zbyt podobna lub identyczna z następującymi nazwami modułu wyliczającego: {1}. Użyj bardziej charakterystycznej nazwy identyfikatora. - Unable to match the identifier name {0} to a valid enumerator name. Specify one of the following enumerator names and try again: + Nie można dopasować nazwy {0} identyfikatora do prawidłowej nazwy modułu wyliczającego. Określ jedną z następujących nazw modułu wyliczającego i spróbuj ponownie: {1} - Use of parentheses is not valid in the expression because identifier grouping is not allowed. Try removing the parentheses, or if a subexpression is enclosed, try expanding the expression. + Użycie nawiasów jest nieprawidłowe w wyrażeniu, ponieważ grupowanie identyfikatorów jest niedozwolone. Spróbuj usunąć nawiasy lub jeśli podwyrażenie jest ujęte, rozszerz wyrażenie. - Unable to parse the expression due to an unexpected token. Only an OR (,) operator or AND (+) operator is expected after an identifier name. + Nie można przeanalizować wyrażenia z powodu nieoczekiwanego tokenu. Po nazwie identyfikatora jest oczekiwany tylko operator OR (,) lub AND (+). - Unable to parse the expression due to an unexpected token after a NOT (!) operator. An identifier name is expected after a NOT (!) operator. + Nie można przeanalizować wyrażenia z powodu nieoczekiwanego tokenu po operatorze NOT (!). Oczekiwano nazwy identyfikatora po operatorze NOT (!). - Unable to parse the expression due to an unexpected token. An identifier name or a NOT (!) operator is expected at the start of the expression, or after an OR (,) operator or an AND (+) operator. Also, an expression must not end with an OR (,), AND (+) or NOT (!) operator. + Nie można przeanalizować wyrażenia z powodu nieoczekiwanego tokenu. Na początku wyrażenia oczekiwano nazwy identyfikatora lub operatora NOT (!), operatora OR (,) lub operatora AND (+). Ponadto wyrażenie nie może kończyć się operatorem OR (,), AND (+) ani NOT (!). \ No newline at end of file diff --git a/src/System.Management.Automation/resources/pl/FileSystemProviderStrings.pl.resx b/src/System.Management.Automation/resources/pl/FileSystemProviderStrings.pl.resx index 12e8712a0ea..a810900c7e2 100644 --- a/src/System.Management.Automation/resources/pl/FileSystemProviderStrings.pl.resx +++ b/src/System.Management.Automation/resources/pl/FileSystemProviderStrings.pl.resx @@ -118,240 +118,240 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Invoke Item + Wywołaj element - Item: {0} + Element: {0} - Remove File + Usuń plik - Remove Directory + Usuń katalog - Copy File + Kopiuj plik - Item: {0} Destination: {1} + Element: {0} Miejsce docelowe: {1} - Copy Directory + Kopiuj katalog - Rename File + Zmień nazwę pliku - Rename Directory + Zmień nazwę katalogu - Item: {0} Destination: {1} + Element: {0} Miejsce docelowe: {1} - Move File + Przenieś plik - Move Directory + Przenieś katalog - Item: {0} Destination: {1} + Element: {0} Miejsce docelowe: {1} - Set Property File + Ustaw plik właściwości - Set Property Directory + Ustaw katalog właściwości - Item: {0} Property: {1} Value: {2} + Element: {0} Właściwość: {1} Wartość: {2} - Clear Property File + Wyczyść plik właściwości - Clear Property Directory + Wyczyść katalog właściwości - Item: {0} Property: {1} + Element: {0} Właściwość: {1} - Create File + Utwórz plik - Create Directory + Utwórz katalog - Destination: {0} + Lokalizacja docelowa: {0} - Clear Content + Wyczyść zawartość - Item: {0} + Element: {0} - Could not find item {0}. + Nie można odnaleźć elementu {0}. - Cannot remove item {0}: {1} + Nie można usunąć elementu {0}: {1} - Cannot restore attributes on item {0}: {1} + Nie można przywrócić atrybutów elementu {0}: {1} - An object at the specified path {0} does not exist. + Obiekt o określonej ścieżce {0} nie istnieje. - Directory {0} cannot be removed because it is not empty. + Nie można usunąć katalogu {0}, ponieważ nie jest on pusty. - The type is not a known type for the file system. Only "file","directory" or "symboliclink" can be specified. + Typ nie jest znanym typem systemu plików. Można określić tylko parametry „file”, ”directory” lub „symboliclink”. - Cannot process the path because the specified path refers to an item that is outside the basePath. + Nie można przetworzyć ścieżki, ponieważ określona ścieżka odwołuje się do elementu, który znajduje się poza ścieżką basePath. - The specified drive root "{0}" either does not exist, or it is not a folder. + Określony katalog główny dysku „{0}” nie istnieje lub nie jest folderem. - An item with the specified name {0} already exists. + Element o określonej nazwie {0} już istnieje. - A delimiter cannot be specified when reading the stream one byte at a time. + Nie można określić ogranicznika podczas odczytywania strumienia po jednym bajcie naraz. - Cannot overwrite the item {0} with itself. + Nie można zastąpić elementu {0} samym sobą. - Cannot rename the specified target, because it represents a path or device name. + Nie można zmienić nazwy określonego elementu docelowego, ponieważ reprezentuje on ścieżkę lub nazwę urządzenia. - The property {0} does not exist or was not found. + Właściwość {0} nie istnieje lub nie została znaleziona. - You do not have sufficient access rights to perform this operation or the item is hidden, system, or read only. + Nie masz wystarczających praw dostępu do wykonania tej operacji lub element jest ukryty, systemowy lub tylko do odczytu. - The attribute cannot be set because attributes are not supported. Only the following attributes can be set: Archive, Hidden, Normal, ReadOnly, or System. + Nie można ustawić atrybutu, ponieważ atrybuty nie są obsługiwane. Można ustawić tylko następujące atrybuty: Archive, Hidden, Normal, ReadOnly lub System. - The property cannot be cleared because the property is not supported. Only the Attributes property can be cleared. + Nie można wyczyścić właściwości, ponieważ właściwość nie jest obsługiwana. Można wyczyścić tylko właściwość Atrybuty. - Cannot process path '{0}' because the target represents a reserved device name. + Nie można przetworzyć ścieżki „{0}”, ponieważ element docelowy reprezentuje zastrzeżoną nazwę urządzenia. - Encoding not used when '-AsByteStream' specified. + Kodowanie nie jest używane, gdy określono element „-AsByteStream”. - Cannot proceed with byte encoding. When using byte encoding the content must be of type byte. + Nie można kontynuować kodowania bajtów. W przypadku korzystania z kodowania bajtów zawartość musi być typu bajt. - Cannot process the file because the file {0} was not found. + Nie można przetworzyć pliku, ponieważ nie znaleziono pliku {0}. - Directory: + Katalog: - Cannot detect the encoding of the file. The specified encoding {0} is not supported when the content is read in reverse. + Nie można wykryć kodowania pliku. Określone kodowanie {0} nie jest obsługiwane, gdy zawartość jest odczytywana w odwrotnej kolejności. - Could not open the alternate data stream '{0}' of the file '{1}'. + Nie można otworzyć alternatywnego strumienia danych „{0}” pliku „{1}”. - Stream '{0}' of file '{1}'. + Strumień „{0}” pliku „{1}”. - The Raw and Wait parameters cannot be specified in the same command. + Nie można określić parametrów Raw i Wait w tym samym poleceniu. - To use the Persist switch parameter, the drive name must be supported by the operating system (for example, drive letters A-Z). + Aby użyć parametru przełącznika Persist, nazwa dysku musi być obsługiwana przez system operacyjny (na przykład litery dysku A–Z). - When you use the Persist parameter, the root must be a file system location on a remote computer. + W przypadku użycia parametru Persist katalog główny musi być lokalizacją systemu plików na komputerze zdalnym. - The '{0}' and '{1}' parameters cannot be specified in the same command. + W tym samym poleceniu nie można określić parametrów „{0}” i „{1}”. - A directory is required for the operation. The item '{0}' is not a directory. + Do wykonania operacji wymagany jest katalog. Element „{0}” nie jest katalogiem. - Create Junction + Utwórz połączenie - Create Symbolic Link + Utwórz link symboliczny - Administrator privilege required for this operation. + Dla tej operacji wymagane jest uprawnienie administratora. - Create Hard Link + Utwórz twardy link - A file is required for the operation. The item '{0}' is not a file. + Operacja wymaga pliku. Element „{0}” nie jest plikiem. - Hard links are not supported for the specified path. + Twarde linki nie są obsługiwane dla określonej ścieżki. - Symbolic links are not supported for the specified path. + Linki symboliczne nie są obsługiwane dla określonej ścieżki. Kopiowanie {0} do {1} - Destination path {0} is a file that already exists on the target destination. + Ścieżka docelowa {0} to plik, który już istnieje w miejscu docelowym. - Failed to copy file {0} to remote target destination. + Nie można skopiować pliku {0} do zdalnego miejsca docelowego. Z {0} do {1} - Cannot copy a directory '{0}' to file '{0}' + Nie można skopiować katalogu „{0}” do pliku „{0}” - Failed to get directory {0} child items. + Nie można pobrać elementów podrzędnych katalogu {0}. - Failed to read remote file '{0}'. + Nie można odczytać pliku zdalnego „{0}”. - Cannot validate if remote destination {0} is a file. + Nie można sprawdzić, czy zdalne miejsce docelowe {0} jest plikiem. - Failed to create directory '{0}' on remote destination. + Nie można utworzyć katalogu „{0}” w zdalnym miejscu docelowym. - Maximum size for drive has been exceeded: {0}. + Przekroczono maksymalny rozmiar dysku: {0}. - Cannot create link because the path already exists: {0}. + Nie można utworzyć linku, ponieważ ścieżka już istnieje: {0}. - Skip already-visited directory {0}. + Pomiń już odwiedzony katalog {0}. - Destination path cannot be a subdirectory of the source or the source itself: {0}. + Ścieżka docelowa nie może być podkatalogiem źródła ani samym źródłem: {0}. - The target and path cannot be the same. + Element docelowy i ścieżka nie mogą być takie same. - Copied {0} of {1} files + Skopiowano {0} z {1} plików - {0} of {1} ({2:0.0} MB/s) + {0} z {1} ({2:0.0} MB/s) - Removed {0} of {1} files + Usunięto {0} z {1} plików - {0} of {1} ({2:0.0} MB/s) + {0} z {1} ({2:0.0} MB/s) - Creating a junction requires an absolute path for the target. + Tworzenie połączenia wymaga ścieżki bezwzględnej dla obiektu docelowego. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/pl/FormatAndOut_format_xxx.pl.resx b/src/System.Management.Automation/resources/pl/FormatAndOut_format_xxx.pl.resx index 612afc99349..ac71b3f386a 100644 --- a/src/System.Management.Automation/resources/pl/FormatAndOut_format_xxx.pl.resx +++ b/src/System.Management.Automation/resources/pl/FormatAndOut_format_xxx.pl.resx @@ -118,65 +118,65 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cmdlet parameters View and Property are mutually exclusive. + Parametry polecenia cmdlet View i Property wykluczają się wzajemnie. - Cmdlet parameters AutoSize and Column are mutually exclusive. + Parametry poleceń cmdlet AutoSize i Column wykluczają się wzajemnie. - The view name {0} cannot be found. + Nie można odnaleźć nazwy widoku {0}. - The view name {0} cannot be found in the {1} formatting. + Nie można odnaleźć nazwy widoku {0} w formatowaniu {1}. {0} indicates one of the valid formating types such as Table, List, Wide or Custom. - There are no existing {0} views for {1} objects. + Brak istniejących {0} widoków dla {1} obiektów. - The view name {0} cannot be found. Specify one of the following {1} views and try again: {2}. + Nie można odnaleźć nazwy widoku {0}. Określ jeden z następujących {1} widoków i spróbuj ponownie: {2}. - Try using one of these other format cmdlets: + Spróbuj użyć jednego z następujących poleceń cmdlet w innym formacie: Prefix text to suggest user to use one of the valid view names. {0}: - The following object supports IEnumerable: + Następujący obiekt obsługuje interfejs IEnumerable: - The IEnumerable contains no objects. + Element IEnumerable nie zawiera żadnych obiektów. - The IEnumerable contains the following object: + Element IEnumerable zawiera następujący obiekt: - The IEnumerable contains the following {0} objects: + Element IEnumerable zawiera następujące obiekty w liczbie {0}: - Unknown class Id {0}. + Nieznany identyfikator klasy {0}. - The type {0} for property {1} is not valid. + Typ {0} właściwości {1} jest nieprawidłowy. - The value of the {0} data member cannot be null. + Wartość elementu członkowskiego danych {0} nie może mieć wartości null. - The object type is not recognized. + Nie rozpoznano typu obiektu. - Failed to create object with class Id {0}. + Nie można utworzyć obiektu o identyfikatorze klasy {0}. - The {0} property is recursive. + Właściwość {0} jest cykliczna. - Failed to evaluate expression "{0}". + Nie można obliczyć wartości wyrażenia „{0}”. - Failed to interpret format string "{0}". + Nie można zinterpretować ciągu formatu „{0}”. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/pl/FormatAndOut_out_xxx.pl.resx b/src/System.Management.Automation/resources/pl/FormatAndOut_out_xxx.pl.resx index 94f22248141..7ac0563f6ab 100644 --- a/src/System.Management.Automation/resources/pl/FormatAndOut_out_xxx.pl.resx +++ b/src/System.Management.Automation/resources/pl/FormatAndOut_out_xxx.pl.resx @@ -118,21 +118,21 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - <SPACE> next page; <CR> next line; Q quit + <SPACE> następną stronę; <CR> następny wiersz; Zamykanie funkcji Q - The value of LineOutput should not be null. + Wartość elementu LineOutput nie może być równa null. - The lineOutput type {0} was not expected; LineOutput expects type {1}. + Nie oczekiwano parametru lineOutput typu {0}; parametr LineOutput oczekuje typu {1}. - The object of type "{0}" is not valid or not in the correct sequence. This is likely caused by a user-specified "{1}" command which is conflicting with the default formatting. + Obiekt typu „{0}” jest nieprawidłowy lub nie znajduje się w poprawnej kolejności. Jest to prawdopodobnie spowodowane przez określone przez użytkownika polecenie „{1}”, które powoduje konflikt z formatowaniem domyślnym. - Cannot open file "{0}". + Nie można otworzyć pliku „{0}”. - Output to File + Dane wyjściowe do pliku \ No newline at end of file diff --git a/src/System.Management.Automation/resources/ru/CimInstanceTypeAdapterResources.ru.resx b/src/System.Management.Automation/resources/ru/CimInstanceTypeAdapterResources.ru.resx index 4f3fda63c2e..6a6c2b23f14 100644 --- a/src/System.Management.Automation/resources/ru/CimInstanceTypeAdapterResources.ru.resx +++ b/src/System.Management.Automation/resources/ru/CimInstanceTypeAdapterResources.ru.resx @@ -118,10 +118,10 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot convert "{0}" to an object of type "{1}". + Не удается преобразовать "{0}" в объект типа "{1}". - "{0}" is a ReadOnly property. + Свойство "{0}" доступно только для чтения. {0} gets property name \ No newline at end of file diff --git a/src/System.Management.Automation/resources/ru/ConsoleInfoErrorStrings.ru.resx b/src/System.Management.Automation/resources/ru/ConsoleInfoErrorStrings.ru.resx index 2b7c8007e1e..7ca82652b75 100644 --- a/src/System.Management.Automation/resources/ru/ConsoleInfoErrorStrings.ru.resx +++ b/src/System.Management.Automation/resources/ru/ConsoleInfoErrorStrings.ru.resx @@ -118,36 +118,36 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Incorrect PowerShell version {0}. PowerShell version {1} is supported on this computer. + Неверная версия PowerShell {0}. На этом компьютере поддерживается версия PowerShell {1}. - The following errors occurred when loading console {0}: {1} + При загрузке консоли {0} произошли следующие ошибки: {1} - Cannot load PowerShell snap-in {0} because of the following error: {1} + Не удается загрузить оснастку PowerShell {0} из-за следующей ошибки: {1} - PowerShell snap-in "{0}" loaded with the following warnings: {1} + Оснастка PowerShell {0} загружена со следующими предупреждениями: {1} - The PowerShell snap-in module {0} does not have the required PowerShell snap-in strong name {1}. + Модуль оснастки PowerShell {0} не имеет требуемого строгого имени оснастки PowerShell {1}. - The cmdlet '{0}' should not occur more than once in PowerShell snap-in '{1}'. + Командлет {0} не должен встречаться более одного раза в оснастке PowerShell {1}. - PowerShell provider '{0}' should not occur more than once in PowerShell snap-in '{1}'. + Поставщик PowerShell {0} не должен встречаться более одного раза в оснастке PowerShell {1}. - PowerShell {0} is not supported in the current console. PowerShell {1} is supported in the current console. + PowerShell {0} не поддерживается в текущей консоли. PowerShell {1} поддерживается в текущей консоли. - File {0} already exists and {1} was specified. + Файл {0} уже существует, и указан {1}. - The provided configuration file '{0}' does not exist. + Указанный файл конфигурации {0} не существует. - The provided configuration file '{0}' must have a .pssc file extension. + Указанный файл конфигурации {0} должен иметь расширение .pssc. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/ru/EnumExpressionEvaluatorStrings.ru.resx b/src/System.Management.Automation/resources/ru/EnumExpressionEvaluatorStrings.ru.resx index 8faa9a881bd..2c6fcae1cfa 100644 --- a/src/System.Management.Automation/resources/ru/EnumExpressionEvaluatorStrings.ru.resx +++ b/src/System.Management.Automation/resources/ru/EnumExpressionEvaluatorStrings.ru.resx @@ -118,31 +118,31 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The input expression must not be empty. Specify at least one identifier name in each input expression. + Входное выражение не должно быть пустым. Укажите хотя бы одно имя идентификатора в каждом входном выражении. - Unable to match an empty identifier name to a valid enumerator name. Specify one of the following enumerator names and retry: {0}. + Не удалось сопоставить пустое имя идентификатора с допустимым именем элемента перечислителя. Укажите одно из следующих имен перечислителя и повторите попытку: {0}. - The generic type specified for the expression must represent an enum. Specify a valid enum type. + Универсальный тип, указанный для выражения, должен представлять перечисление. Укажите допустимый тип перечисления. - The identifier name {0} cannot be processed because it is either too similar or identical to the following enumerator names: {1}. Use a more specific identifier name. + Имя идентификатора {0} не может быть обработано, так как оно либо слишком похоже на следующие имена элементов перечисления, либо совпадает с ними: {1}. Используйте более конкретное имя идентификатора. - Unable to match the identifier name {0} to a valid enumerator name. Specify one of the following enumerator names and try again: + Не удалось сопоставить имя идентификатора {0} с допустимым именем перечислителя. Укажите одно из следующих имен перечислителя и повторите попытку: {1} - Use of parentheses is not valid in the expression because identifier grouping is not allowed. Try removing the parentheses, or if a subexpression is enclosed, try expanding the expression. + Использование скобок в выражении недопустимо, так как группировка идентификаторов не разрешена. Попробуйте убрать скобки или, если в них заключено подвыражение, — раскрыть выражение. - Unable to parse the expression due to an unexpected token. Only an OR (,) operator or AND (+) operator is expected after an identifier name. + Не удалось проанализировать выражение из-за неожиданного токена. После имени идентификатора ожидается только оператор OR (,) или оператор AND (+). - Unable to parse the expression due to an unexpected token after a NOT (!) operator. An identifier name is expected after a NOT (!) operator. + Не удалось проанализировать выражение из-за неожиданного токена после оператора NOT (!). После оператора NOT (!) ожидается имя идентификатора. - Unable to parse the expression due to an unexpected token. An identifier name or a NOT (!) operator is expected at the start of the expression, or after an OR (,) operator or an AND (+) operator. Also, an expression must not end with an OR (,), AND (+) or NOT (!) operator. + Не удалось проанализировать выражение из-за неожиданного токена. В начале выражения, а также после оператора OR (,) или AND (+), ожидается имя идентификатора или оператор NOT (!). Кроме того, выражение не должно заканчиваться оператором OR (,), AND (+) или NOT (!). \ No newline at end of file diff --git a/src/System.Management.Automation/resources/ru/FormatAndOut_out_xxx.ru.resx b/src/System.Management.Automation/resources/ru/FormatAndOut_out_xxx.ru.resx index 94f22248141..211d747ee48 100644 --- a/src/System.Management.Automation/resources/ru/FormatAndOut_out_xxx.ru.resx +++ b/src/System.Management.Automation/resources/ru/FormatAndOut_out_xxx.ru.resx @@ -118,21 +118,21 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - <SPACE> next page; <CR> next line; Q quit + <SPACE> следующая страница; <CR> следующая строка; Q — выход - The value of LineOutput should not be null. + Значение LineOutput не должно иметь значение NULL. - The lineOutput type {0} was not expected; LineOutput expects type {1}. + Тип lineOutput {0} не ожидался; LineOutput ожидает тип {1}. - The object of type "{0}" is not valid or not in the correct sequence. This is likely caused by a user-specified "{1}" command which is conflicting with the default formatting. + Объект типа {0} недопустим или находится в неправильной последовательности. Скорее всего, это вызвано указанной пользователем командой {1}, которая конфликтует с форматированием по умолчанию. - Cannot open file "{0}". + Не удается открыть файл {0}. - Output to File + Вывод в файл \ No newline at end of file diff --git a/src/System.Management.Automation/resources/tr/AutomationExceptions.tr.resx b/src/System.Management.Automation/resources/tr/AutomationExceptions.tr.resx index 18d6f475628..a967ee1156d 100644 --- a/src/System.Management.Automation/resources/tr/AutomationExceptions.tr.resx +++ b/src/System.Management.Automation/resources/tr/AutomationExceptions.tr.resx @@ -118,93 +118,93 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot process argument because the value of argument "{0}" is not valid. Change the value of the "{0}" argument and run the operation again. + Bağımsız değişken "{0}" değeri geçersiz olduğu için bağımsız değişken işlenemiyor. “{0}" bağımsız değişkeninin değerini değiştirin ve işlemi yeniden çalıştırın. - Cannot process argument because the value of parameter "{0}" is not valid. Valid values are "Global", "Local", or "Script", or a number relative to the current scope (0 through the number of scopes where 0 is the current scope and 1 is its parent). Change the value of the "{0}" parameter and run the operation again. + Parametre "{0}" değeri geçersiz olduğu için bağımsız değişken işlenemiyor. Geçerli değerler "Global", "Local" veya "Script" ya da geçerli kapsama göreli bir sayı (0 ile kapsam sayısı arasında; 0 geçerli kapsam, 1 ise üst kapsamıdır). “{0}" parametresinin değerini değiştirin ve işlemi yeniden çalıştırın. - Cannot process argument because the value of argument "{0}" is null. Change the value of argument "{0}" to a non-null value. + Bağımsız değişken "{0}" null olduğu için işlenemiyor. “{0}" bağımsız değişkeninin değerini null olmayan bir değerle değiştirin. - Cannot process argument because the value of argument "{0}" is out of range. Change argument "{0}" to a value that is within range. + Bağımsız değişken "{0}" değeri aralık dışında olduğu için işlenemiyor. Bağımsız değişken "{0}" değerini aralık içinde olacak şekilde değiştirin. - Cannot perform operation because operation "{0}" is not valid. Remove operation "{0}", or investigate why it is not valid. + İşlem "{0}" geçersiz olduğu için işlem gerçekleştirilemiyor. İşlem "{0}"'ı kaldırın veya neden geçersiz olduğunu araştırın. - Cannot perform operation because operation "{0}" is not implemented. + “{0}" işlemi uygulanamadığı için işlem gerçekleştirilemiyor. - Cannot perform operation because operation "{0}" is not supported. + Nesne "{0}" zaten atıldığı için işlem gerçekleştirilemiyor. - Cannot perform operation because object "{0}" has already been disposed. + Nesne "{0}" zaten atıldığı için işlem gerçekleştirilemiyor. - The script block cannot be invoked because it contains more than one clause. The Invoke() method can only be used on script blocks that contain a single clause. + Betik bloğu, birden fazla yan tümce içerdiği için çağrılamaz. Invoke() yöntemi yalnızca tek bir yan tümce içeren betik bloklarında kullanılabilir. - The script block cannot be converted because it contains more than one clause. Expressions or control structures are not permitted. Verify that the script block contains exactly one pipeline or command. + Betik bloğu, birden fazla yan tümce içerdiği için dönüştürülemez. İfadeler veya denetim yapıları izin verilmez. Betik bloğunun tam olarak bir işlem hattı veya komut içerdiğini doğrulayın. - An empty script block cannot be converted. Verify that the script block contains exactly one pipeline or command. + Boş bir betik bloğu dönüştürülemez. Betik bloğunun tam olarak bir işlem hattı veya komut içerdiğini doğrulayın. - Only a script block that contains exactly one pipeline or command can be converted. Expressions or control structures are not permitted. Verify that the script block contains exactly one pipeline or command. + Yalnızca tam olarak bir işlem hattı veya komut içeren bir betik bloğu dönüştürülebilir. İfadeler veya denetim yapıları izin verilmez. Betik bloğunun tam olarak bir işlem hattı veya komut içerdiğini doğrulayın. - A script block that contains a top-level trap statement cannot be converted. + Üst düzey bir trap deyimi içeren bir betik bloğu dönüştürülemez. - Cannot generate a PowerShell object for a ScriptBlock dereferencing variables undeclared in the param(...) block. Name of undeclared variable: {0}. + param(...) bloğunda bildirilmemiş değişkenlere başvuran bir ScriptBlock için Windows PowerShell nesnesi oluşturulamıyor. Bildirilmemiş değişkenin adı: {0}. - Cannot generate a PowerShell object for a ScriptBlock evaluating non-constant expressions. Non-constant expression: {0}. + Sabit olmayan ifadeler değerlendiren bir ScriptBlock için Windows PowerShell nesnesi oluşturulamıyor. Sabit olmayan ifade: {0}. - Cannot generate a PowerShell object for a ScriptBlock evaluating dynamic expressions. Dynamic expression: {0}. + Dinamik ifadeler değerlendiren bir ScriptBlock için Windows PowerShell nesnesi oluşturulamıyor. Dinamik ifade: {0}. - Cannot generate a PowerShell object for a ScriptBlock that tries to pass other script blocks inside argument values. + Bağımsız değişken değerlerinde başka betik bloklarını geçirmeye çalışan bir ScriptBlock için Windows PowerShell nesnesi oluşturulamıyor. - Cannot generate a PowerShell object for a ScriptBlock which invokes pipelines, commands or functions to evaluate arguments of the main pipeline. + Ana işlem hattının bağımsız değişkenlerini değerlendirmek için işlem hatları, komutlar veya işlevler çağıran bir ScriptBlock için Windows PowerShell nesnesi oluşturulamıyor. - Cannot generate a PowerShell object for a ScriptBlock that uses dot sourcing. + Dot sourcing kullanan bir ScriptBlock için Windows PowerShell nesnesi oluşturulamıyor. - Cannot generate a PowerShell object for a ScriptBlock that invokes other script blocks. + Başka betik bloklarını çağıran bir ScriptBlock için Windows PowerShell nesnesi oluşturulamıyor. - The script block cannot be converted to a PowerShell object because it contains forbidden redirection operators. + Betik bloğu, yasaklı yönlendirme işleçleri içerdiği için Windows PowerShell nesnesine dönüştürülemez. - Cannot generate a PowerShell object for a ScriptBlock that does not have an associated operation context. + ilişkili bir işlem bağlamı olmayan bir ScriptBlock için Windows PowerShell nesnesi oluşturulamıyor. - The command was stopped by the user. + Komut kullanıcı tarafından durduruldu. - Object "{0}" is the wrong type to return from the dynamicparam block. The dynamicparam block must return either $null, or an object with type [System.Management.Automation.RuntimeDefinedParameterDictionary]. + “{0}" nesnesi, dynamicparam bloğundan döndürmek için yanlış türde. dynamicparam bloğu, ya $null ya da [System.Management.Automation.RuntimeDefinedParameterDictionary] türünde bir nesne döndürmelidir. - The script block cannot be converted to an open generic type. Define an appropriate closed generic type, and then retry. + Betik bloğu açık bir genel türe dönüştürülemez. Uygun bir kapalı genel tür tanımlayın ve ardından yeniden deneyin. - Cannot generate a PowerShell object for a ScriptBlock that starts a pipeline with an expression. + Bir ifade ile başlayan bir işlem hattı başlatan ScriptBlock için Windows PowerShell nesnesi oluşturulamıyor. - The value of the using variable '$using:{0}' cannot be retrieved because it has not been set in the local session. + Yerel oturumda ayarlanmadığı için kullanma değişkeni '$using:{0}' değeri alınamıyor. - Cannot get the value of the Using expression '{0}' in the specified variable dictionary. When creating a PowerShell instance from a script block, the Using expression cannot contain an indexing operation or member-accessing operation. + Belirtilen değişken sözlüğünde Using ifadesi "{0}" değerini alınamıyor. Bir betik bloğundan Windows PowerShell örneği oluşturulurken, Using ifadesi dizin oluşturma işlemi veya üye erişme işlemi içeremez. - Compiled Script Block Dot Source + Derlenmiş Betik Bloğu Dot Source - Script block '{0}' invocation into current scope will be disallowed in Constrained Language mode. Script language mode: {1}, Context language mode: {2}. + Geçerli kapsamdaki ' {0}' betik bloğu çağrısına, Kısıtlanmış Dil modunda izin verilmeyecek. Betik dili modu: {1}, Bağlam dili modu: {2}. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/tr/ConsoleInfoErrorStrings.tr.resx b/src/System.Management.Automation/resources/tr/ConsoleInfoErrorStrings.tr.resx index 2b7c8007e1e..ea33a62c661 100644 --- a/src/System.Management.Automation/resources/tr/ConsoleInfoErrorStrings.tr.resx +++ b/src/System.Management.Automation/resources/tr/ConsoleInfoErrorStrings.tr.resx @@ -118,36 +118,36 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Incorrect PowerShell version {0}. PowerShell version {1} is supported on this computer. + Windows PowerShell sürümü {0} yanlış. Windows PowerShell sürümü {1}, bu bilgisayarda destekleniyor. - The following errors occurred when loading console {0}: {1} + Konsol {0} yüklenirken aşağıdaki hatalar oluştu: {1} - Cannot load PowerShell snap-in {0} because of the following error: {1} + Aşağıdaki hata nedeniyle Windows PowerShell ek bileşeni {0} yüklenemiyor: {1} - PowerShell snap-in "{0}" loaded with the following warnings: {1} + Windows PowerShell ek bileşeni "{0}", aşağıdaki uyarılarla yüklendi: {1} - The PowerShell snap-in module {0} does not have the required PowerShell snap-in strong name {1}. + Windows PowerShell ek bileşeni modülü {0}, gerekli Windows PowerShell ek bileşeni güçlü adına {1} sahip değil. - The cmdlet '{0}' should not occur more than once in PowerShell snap-in '{1}'. + Windows PowerShell cmdlet'i '{0}', Windows PowerShell ek bileşeni '{1}' içinde birden fazla kez bulunmamalıdır. - PowerShell provider '{0}' should not occur more than once in PowerShell snap-in '{1}'. + Windows PowerShell sağlayıcısı '{0}', Windows PowerShell ek bileşeni '{1}' içinde birden fazla kez bulunmamalıdır. - PowerShell {0} is not supported in the current console. PowerShell {1} is supported in the current console. + Windows PowerShell {0}, geçerli konsolda desteklenmiyor. Windows PowerShell {1}, geçerli konsolda destekleniyor. - File {0} already exists and {1} was specified. + Dosya {0} zaten var ve {1} belirtildi. - The provided configuration file '{0}' does not exist. + Sağlanan yapılandırma dosyası '{0}' mevcut değil. - The provided configuration file '{0}' must have a .pssc file extension. + Sağlanan yapılandırma dosyası '{0}', .pssc dosya uzantısına sahip olmalıdır. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/tr/EnumExpressionEvaluatorStrings.tr.resx b/src/System.Management.Automation/resources/tr/EnumExpressionEvaluatorStrings.tr.resx index 8faa9a881bd..cca4f91a64a 100644 --- a/src/System.Management.Automation/resources/tr/EnumExpressionEvaluatorStrings.tr.resx +++ b/src/System.Management.Automation/resources/tr/EnumExpressionEvaluatorStrings.tr.resx @@ -118,31 +118,31 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The input expression must not be empty. Specify at least one identifier name in each input expression. + Giriş dil ifadesi boş olamaz. Her giriş dil ifadesinde en az bir tanımlayıcı adı belirtin. - Unable to match an empty identifier name to a valid enumerator name. Specify one of the following enumerator names and retry: {0}. + Boş bir tanımlayıcı adı, geçerli bir numaralandırıcı adına eşlenemiyor. Aşağıdaki numaralandırıcı adlarından birini belirtin ve yeniden deneyin: {0}. - The generic type specified for the expression must represent an enum. Specify a valid enum type. + İfade için belirtilen genel tür bir sabit listesini temsil etmelidir. Geçerli bir sabit listesi türü belirtin. - The identifier name {0} cannot be processed because it is either too similar or identical to the following enumerator names: {1}. Use a more specific identifier name. + {0} tanımlayıcı adı, şu sabit listesi üyesi adlarına çok benzer veya onlarla aynı olduğu için işlenemiyor: {1}. Daha belirgin bir tanımlayıcı adı kullanın. - Unable to match the identifier name {0} to a valid enumerator name. Specify one of the following enumerator names and try again: + Tanımlayıcı adı {0}, geçerli bir numaralandırıcı adına eşlenemiyor. Aşağıdaki numaralandırıcı adlarından birini belirtin ve yeniden deneyin: {1} - Use of parentheses is not valid in the expression because identifier grouping is not allowed. Try removing the parentheses, or if a subexpression is enclosed, try expanding the expression. + Parantez kullanımı, tanımlayıcı gruplandırmasına izin verilmediği için bu dil ifadesinde geçersizdir. Parantezleri kaldırmayı deneyin; ya da bir alt ifade kapsanmışsa, dil ifadesini genişletmeyi deneyin. - Unable to parse the expression due to an unexpected token. Only an OR (,) operator or AND (+) operator is expected after an identifier name. + Beklenmeyen bir belirteç nedeniyle dil ifadesi ayrıştırılamıyor. Bir tanımlayıcı adından sonra yalnızca bir YADA (,) işleci veya VE (+) işleci bekleniyor. - Unable to parse the expression due to an unexpected token after a NOT (!) operator. An identifier name is expected after a NOT (!) operator. + Beklenmeyen bir DEĞİL (!) işleci sonrasında dil ifadesi ayrıştırılamıyor. DEĞİL (!) işleci sonrasında bir tanımlayıcı adı bekleniyor. - Unable to parse the expression due to an unexpected token. An identifier name or a NOT (!) operator is expected at the start of the expression, or after an OR (,) operator or an AND (+) operator. Also, an expression must not end with an OR (,), AND (+) or NOT (!) operator. + Beklenmeyen bir belirteç nedeniyle dil ifadesi ayrıştırılamıyor. Bir tanımlayıcı adı ya da bir DEĞİL (!) işleci, dil ifadesinin başında veya bir yada (,) işleci ya da bir VE (+) işleci sonrasında bekleniyor. Ayrıca, bir dil ifadesi YADA (,) işleci, VE (+) işleci veya değil (!) işleci ile sonlanmamalıdır. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/zh-Hans/AutomationExceptions.zh-Hans.resx b/src/System.Management.Automation/resources/zh-Hans/AutomationExceptions.zh-Hans.resx index 18d6f475628..1e5c0c6728a 100644 --- a/src/System.Management.Automation/resources/zh-Hans/AutomationExceptions.zh-Hans.resx +++ b/src/System.Management.Automation/resources/zh-Hans/AutomationExceptions.zh-Hans.resx @@ -118,93 +118,93 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot process argument because the value of argument "{0}" is not valid. Change the value of the "{0}" argument and run the operation again. + 无法处理参数，因为参数 "{0}" 的值无效。请更改参数 "{0}" 的值，然后再次运行该操作。 - Cannot process argument because the value of parameter "{0}" is not valid. Valid values are "Global", "Local", or "Script", or a number relative to the current scope (0 through the number of scopes where 0 is the current scope and 1 is its parent). Change the value of the "{0}" parameter and run the operation again. + 无法处理参数，因为参数 "{0}" 的值无效。有效值为 "Global"、"Local"、"Script" 或者相对于当前范围的数字(0 到范围数，其中 0 是指当前范围，1 是指其父范围)。请更改 "{0}" 参数的值，然后重新运行该操作。 - Cannot process argument because the value of argument "{0}" is null. Change the value of argument "{0}" to a non-null value. + 无法处理参数，因为参数 "{0}" 的值为 null。请将参数 "{0}" 的值更改为非 null 值。 - Cannot process argument because the value of argument "{0}" is out of range. Change argument "{0}" to a value that is within range. + 无法处理参数，因为参数 "{0}" 的值超出范围。请将参数 "{0}" 更改为范围内的值。 - Cannot perform operation because operation "{0}" is not valid. Remove operation "{0}", or investigate why it is not valid. + 无法执行操作，因为操作 "{0}" 无效。请移除操作 "{0}"，或调查其无效的原因。 - Cannot perform operation because operation "{0}" is not implemented. + 无法执行操作，因为未实现操作 "{0}"。 - Cannot perform operation because operation "{0}" is not supported. + 无法执行操作，因为不支持操作 "{0}"。 - Cannot perform operation because object "{0}" has already been disposed. + 无法执行操作，因为对象 "{0}" 已被释放。 - The script block cannot be invoked because it contains more than one clause. The Invoke() method can only be used on script blocks that contain a single clause. + 无法调用脚本块，因为它包含多个子句。Invoke() 方法只能用于包含单个子句的脚本块。 - The script block cannot be converted because it contains more than one clause. Expressions or control structures are not permitted. Verify that the script block contains exactly one pipeline or command. + 无法转换脚本块，因为它包含多个子句。不允许使用表达式或控件结构。验证脚本块是否只包含一个管道或命令。 - An empty script block cannot be converted. Verify that the script block contains exactly one pipeline or command. + 无法转换空脚本块。验证脚本块是否只包含一个管道或命令。 - Only a script block that contains exactly one pipeline or command can be converted. Expressions or control structures are not permitted. Verify that the script block contains exactly one pipeline or command. + 只能转换仅包含一个管道或命令的脚本块。不允许使用表达式或控件结构。验证脚本块是否只包含一个管道或命令。 - A script block that contains a top-level trap statement cannot be converted. + 包含顶级 trap 语句的脚本块无法转换。 - Cannot generate a PowerShell object for a ScriptBlock dereferencing variables undeclared in the param(...) block. Name of undeclared variable: {0}. + 无法为取消引用 param(...) 块中未声明变量的 ScriptBlock 生成 PowerShell 对象。 未声明变量的名称: {0}。 - Cannot generate a PowerShell object for a ScriptBlock evaluating non-constant expressions. Non-constant expression: {0}. + 无法为计算非常量表达式的 ScriptBlock 生成 PowerShell 对象。非常量表达式: {0}。 - Cannot generate a PowerShell object for a ScriptBlock evaluating dynamic expressions. Dynamic expression: {0}. + 无法为计算动态表达式的 ScriptBlock 生成 PowerShell 对象。动态表达式: {0}。 - Cannot generate a PowerShell object for a ScriptBlock that tries to pass other script blocks inside argument values. + 无法为尝试在参数值内传递其他脚本块的 ScriptBlock 生成 PowerShell 对象。 - Cannot generate a PowerShell object for a ScriptBlock which invokes pipelines, commands or functions to evaluate arguments of the main pipeline. + 无法为调用管道、命令或函数来计算主管道参数的 ScriptBlock 生成 PowerShell 对象。 - Cannot generate a PowerShell object for a ScriptBlock that uses dot sourcing. + 无法为使用点源的 ScriptBlock 生成 PowerShell 对象。 - Cannot generate a PowerShell object for a ScriptBlock that invokes other script blocks. + 无法为调用其他脚本块的 ScriptBlock 生成 PowerShell 对象。 - The script block cannot be converted to a PowerShell object because it contains forbidden redirection operators. + 无法将脚本块转换为 PowerShell 对象，因为它包含禁止重定向运算符。 - Cannot generate a PowerShell object for a ScriptBlock that does not have an associated operation context. + 无法为没有关联操作上下文的 ScriptBlock 生成 PowerShell 对象。 - The command was stopped by the user. + 用户已停止该命令。 - Object "{0}" is the wrong type to return from the dynamicparam block. The dynamicparam block must return either $null, or an object with type [System.Management.Automation.RuntimeDefinedParameterDictionary]. + 对象 "{0}" 的类型不正确，无法从 dynamicparam 块返回。dynamicparam 块必须返回 $null，或者返回类型为 [System.Management.Automation.RuntimeDefinedParameterDictionary] 的对象。 - The script block cannot be converted to an open generic type. Define an appropriate closed generic type, and then retry. + 脚本块无法转换为开放泛型类型。请定义适当的封闭泛型类型，然后重试。 - Cannot generate a PowerShell object for a ScriptBlock that starts a pipeline with an expression. + 无法为使用表达式启动管道的 ScriptBlock 生成 PowerShell 对象。 - The value of the using variable '$using:{0}' cannot be retrieved because it has not been set in the local session. + 无法检索 using 变量 '$using:{0}' 的值，因为该变量尚未在本地会话中设置。 - Cannot get the value of the Using expression '{0}' in the specified variable dictionary. When creating a PowerShell instance from a script block, the Using expression cannot contain an indexing operation or member-accessing operation. + 无法获取指定变量字典中 Using 表达式 '{0}' 的值。从脚本块创建 PowerShell 实例时，Using 表达式不能包含索引操作或成员访问操作。 - Compiled Script Block Dot Source + 编译的脚本块点源 - Script block '{0}' invocation into current scope will be disallowed in Constrained Language mode. Script language mode: {1}, Context language mode: {2}. + 在“受约束语言”模式下，将不允许在当前范围中调用脚本块 "{0}"。脚本语言模式: {1}，上下文语言模式: {2}。 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/zh-Hans/ConsoleInfoErrorStrings.zh-Hans.resx b/src/System.Management.Automation/resources/zh-Hans/ConsoleInfoErrorStrings.zh-Hans.resx index 2b7c8007e1e..b2171c6b900 100644 --- a/src/System.Management.Automation/resources/zh-Hans/ConsoleInfoErrorStrings.zh-Hans.resx +++ b/src/System.Management.Automation/resources/zh-Hans/ConsoleInfoErrorStrings.zh-Hans.resx @@ -118,36 +118,36 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Incorrect PowerShell version {0}. PowerShell version {1} is supported on this computer. + PowerShell 版本 {0} 不正确。此计算机支持 PowerShell 版本 {1}。 - The following errors occurred when loading console {0}: {1} + 加载控制台 {0} 时出现以下错误: {1} - Cannot load PowerShell snap-in {0} because of the following error: {1} + 由于以下错误，无法加载 PowerShell 管理单元 {0}: {1} - PowerShell snap-in "{0}" loaded with the following warnings: {1} + PowerShell 管理单元 "{0}" 已加载，并显示以下警告: {1} - The PowerShell snap-in module {0} does not have the required PowerShell snap-in strong name {1}. + PowerShell 管理单元模块 {0} 没有所需的 PowerShell 管理单元强名称 {1}。 - The cmdlet '{0}' should not occur more than once in PowerShell snap-in '{1}'. + Cmdlet "{0}" 在 PowerShell 管理单元 "{1}" 中不应出现多次。 - PowerShell provider '{0}' should not occur more than once in PowerShell snap-in '{1}'. + PowerShell 提供程序 "{0}" 在 PowerShell 管理单元 "{1}" 中不应出现多次。 - PowerShell {0} is not supported in the current console. PowerShell {1} is supported in the current console. + 当前控制台不支持 PowerShell {0}。当前控制台支持 PowerShell {1}。 - File {0} already exists and {1} was specified. + 文件 {0} 已存在，且已指定 {1}。 - The provided configuration file '{0}' does not exist. + 提供的配置文件 "{0}" 不存在。 - The provided configuration file '{0}' must have a .pssc file extension. + 提供的配置文件 "{0}" 必须使用 .pssc 文件扩展名。 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/zh-Hans/FileSystemProviderStrings.zh-Hans.resx b/src/System.Management.Automation/resources/zh-Hans/FileSystemProviderStrings.zh-Hans.resx index 941e1b8bd2f..be4a583e929 100644 --- a/src/System.Management.Automation/resources/zh-Hans/FileSystemProviderStrings.zh-Hans.resx +++ b/src/System.Management.Automation/resources/zh-Hans/FileSystemProviderStrings.zh-Hans.resx @@ -118,240 +118,240 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Invoke Item + 调用项 - Item: {0} + 项: {0} - Remove File + 删除文件 - Remove Directory + 删除目录 - Copy File + 复制文件 - Item: {0} Destination: {1} + 项: {0} 目标: {1} - Copy Directory + 复制目录 - Rename File + 重命名文件 - Rename Directory + 重命名目录 - Item: {0} Destination: {1} + 项: {0} 目标: {1} - Move File + 移动文件 - Move Directory + 移动目录 - Item: {0} Destination: {1} + 项: {0} 目标: {1} - Set Property File + 设置属性文件 - Set Property Directory + 设置属性目录 - Item: {0} Property: {1} Value: {2} + 项: {0} 属性: {1} 值: {2} - Clear Property File + 清除属性文件 - Clear Property Directory + 清除属性目录 - Item: {0} Property: {1} + 项: {0} 属性: {1} - Create File + 创建文件 - Create Directory + 创建目录 - Destination: {0} + 目标: {0} - Clear Content + 清除内容 - Item: {0} + 项: {0} - Could not find item {0}. + 找不到项 {0}。 - Cannot remove item {0}: {1} + 无法移动项 {0}: {1} - Cannot restore attributes on item {0}: {1} + 无法还原项 {0} 上的属性: {1} - An object at the specified path {0} does not exist. + 指定路径 {0} 上的对象不存在。 - Directory {0} cannot be removed because it is not empty. + 无法删除目录 {0}，因为它不为空。 - The type is not a known type for the file system. Only "file","directory" or "symboliclink" can be specified. + 该类型不是已知的文件系统类型。只能指定 "file"、"directory" 或 "symboliclink"。 - Cannot process the path because the specified path refers to an item that is outside the basePath. + 无法处理路径，因为指定的路径引用了 basePath 之外的项目。 - The specified drive root "{0}" either does not exist, or it is not a folder. + 指定的驱动器根目录 "{0}" 不存在，或者它不是文件夹。 - An item with the specified name {0} already exists. + 具有指定名称 {0} 的项已经存在。 - A delimiter cannot be specified when reading the stream one byte at a time. + 按字节读取流时，无法指定分隔符。 - Cannot overwrite the item {0} with itself. + 无法用自身覆盖项 {0}。 - Cannot rename the specified target, because it represents a path or device name. + 无法重命名指定的目标，因为它代表的是路径或设备名称。 - The property {0} does not exist or was not found. + 属性 {0} 不存在或未找到。 - You do not have sufficient access rights to perform this operation or the item is hidden, system, or read only. + 你没有足够的访问权限来执行此操作，或者该项目为隐藏项、系统项或只读项。 - The attribute cannot be set because attributes are not supported. Only the following attributes can be set: Archive, Hidden, Normal, ReadOnly, or System. + 无法设置属性，因为不支持属性。只能设置以下属性: Archive、Hidden、Normal、ReadOnly 或 System。 - The property cannot be cleared because the property is not supported. Only the Attributes property can be cleared. + 无法清除该属性，因为不支持该属性。只能清除 Attributes 属性。 - Cannot process path '{0}' because the target represents a reserved device name. + 无法处理路径 "{0}"，因为目标代表保留的设备名称。 - Encoding not used when '-AsByteStream' specified. + 指定 "-AsByteStream" 时不使用编码。 - Cannot proceed with byte encoding. When using byte encoding the content must be of type byte. + 无法继续进行字节编码。使用字节编码时，内容必须为字节类型。 - Cannot process the file because the file {0} was not found. + 无法处理文件，因为找不到文件 {0}。 - Directory: + 目录: - Cannot detect the encoding of the file. The specified encoding {0} is not supported when the content is read in reverse. + 无法检测文件的编码。反向读取内容时，不支持指定的编码 {0}。 - Could not open the alternate data stream '{0}' of the file '{1}'. + 无法打开文件 "{1}" 的备用数据流 "{0}"。 - Stream '{0}' of file '{1}'. + 文件 "{1}" 的流 "{0}"。 - The Raw and Wait parameters cannot be specified in the same command. + 不能在同一命令中指定 Raw 和 Wait 参数。 - To use the Persist switch parameter, the drive name must be supported by the operating system (for example, drive letters A-Z). + 若要使用 Persist 开关参数，操作系统必须支持驱动器名称(例如，驱动器号 A-Z)。 - When you use the Persist parameter, the root must be a file system location on a remote computer. + 使用 Persist 参数时，根必须是远程计算机上的文件系统位置。 - The '{0}' and '{1}' parameters cannot be specified in the same command. + 不能在同一命令中指定 "{0}" 和 "{1}" 参数。 - A directory is required for the operation. The item '{0}' is not a directory. + 该操作需要目录。项目 "{0}" 不是目录。 - Create Junction + 创建接合 - Create Symbolic Link + 创建符号链接 - Administrator privilege required for this operation. + 此操作需要管理员权限。 - Create Hard Link + 创建硬链接 - A file is required for the operation. The item '{0}' is not a file. + 该操作需要文件。项目 "{0}" 不是文件。 - Hard links are not supported for the specified path. + 指定的路径不支持硬链接。 - Symbolic links are not supported for the specified path. + 指定的路径不支持符号链接。 正在将 {0} 复制到 {1} - Destination path {0} is a file that already exists on the target destination. + 目标路径 {0} 是目标位置上已存在的文件。 - Failed to copy file {0} to remote target destination. + 未能将文件 {0} 复制到远程目标位置。 从 {0} 到 {1} - Cannot copy a directory '{0}' to file '{0}' + 无法将目录 "{0}" 复制到文件 "{0}" - Failed to get directory {0} child items. + 未能获取目录 {0} 的子项。 - Failed to read remote file '{0}'. + 未能读取远程文件 "{0}"。 - Cannot validate if remote destination {0} is a file. + 无法验证远程目标 {0} 是否为文件。 - Failed to create directory '{0}' on remote destination. + 未能在远程目标上创建目录 "{0}"。 - Maximum size for drive has been exceeded: {0}. + 已超出驱动器的最大大小: {0}。 - Cannot create link because the path already exists: {0}. + 无法创建链接，因为路径已存在: {0}。 - Skip already-visited directory {0}. + 跳过已访问的目录 {0}。 - Destination path cannot be a subdirectory of the source or the source itself: {0}. + 目标路径不能是源路径的子目录，也不能是源路径本身: {0}。 - The target and path cannot be the same. + 目标和路径不能相同。 - Copied {0} of {1} files + 已复制 {0} 个文件,共 {1} 个 - {0} of {1} ({2:0.0} MB/s) + {0}/{1} ({2:0.0} MB/秒) - Removed {0} of {1} files + 已删除 {0}/{1} 的文件 - {0} of {1} ({2:0.0} MB/s) + {0}/{1} ({2:0.0} MB/秒) - Creating a junction requires an absolute path for the target. + 创建交汇点需要目标的绝对路径。 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/zh-Hans/FormatAndOut_format_xxx.zh-Hans.resx b/src/System.Management.Automation/resources/zh-Hans/FormatAndOut_format_xxx.zh-Hans.resx index 612afc99349..822252ecfff 100644 --- a/src/System.Management.Automation/resources/zh-Hans/FormatAndOut_format_xxx.zh-Hans.resx +++ b/src/System.Management.Automation/resources/zh-Hans/FormatAndOut_format_xxx.zh-Hans.resx @@ -118,65 +118,65 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cmdlet parameters View and Property are mutually exclusive. + Cmdlet 参数 View 和 Property 互斥。 - Cmdlet parameters AutoSize and Column are mutually exclusive. + Cmdlet 参数 AutoSize 和 Column 互斥。 - The view name {0} cannot be found. + 找不到视图名 {0}。 - The view name {0} cannot be found in the {1} formatting. + 无法找到格式为 {1} 的视图名称 {0}。 {0} indicates one of the valid formating types such as Table, List, Wide or Custom. - There are no existing {0} views for {1} objects. + {1} 对象没有现有的 {0} 视图。 - The view name {0} cannot be found. Specify one of the following {1} views and try again: {2}. + 找不到视图名 {0}。请指定以下 {1} 视图中的一个，然后重试: {2}。 - Try using one of these other format cmdlets: + 请尝试从以下其他格式 cmdlet 中选择一个使用: Prefix text to suggest user to use one of the valid view names. - {0}: + {0}: - The following object supports IEnumerable: + 以下对象支持 IEnumerable: - The IEnumerable contains no objects. + IEnumerable 不包含任何对象。 - The IEnumerable contains the following object: + IEnumerable 包含以下对象: - The IEnumerable contains the following {0} objects: + IEnumerable 包含以下 {0} 对象: - Unknown class Id {0}. + 未知的类 ID {0}。 - The type {0} for property {1} is not valid. + 属性 {1} 的类型 {0} 无效。 - The value of the {0} data member cannot be null. + {0} 数据成员的值不能为 null。 - The object type is not recognized. + 无法识别对象类型。 - Failed to create object with class Id {0}. + 未能创建类 ID 为 {0} 的对象。 - The {0} property is recursive. + 属性 {0} 是递归的。 - Failed to evaluate expression "{0}". + 未能评估表达式 "{0}"。 - Failed to interpret format string "{0}". + 未能解释格式字符串 "{0}"。 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/zh-Hans/FormatAndOut_out_xxx.zh-Hans.resx b/src/System.Management.Automation/resources/zh-Hans/FormatAndOut_out_xxx.zh-Hans.resx index 94f22248141..fc5f8b6ff8c 100644 --- a/src/System.Management.Automation/resources/zh-Hans/FormatAndOut_out_xxx.zh-Hans.resx +++ b/src/System.Management.Automation/resources/zh-Hans/FormatAndOut_out_xxx.zh-Hans.resx @@ -118,21 +118,21 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - <SPACE> next page; <CR> next line; Q quit + <SPACE> 下一页；<CR> 下一行；Q 退出 - The value of LineOutput should not be null. + LineOutput 的值不应为空。 - The lineOutput type {0} was not expected; LineOutput expects type {1}. + lineOutput 类型“{0}”不是预期的类型；LineOutput 应为类型“{1}”。 - The object of type "{0}" is not valid or not in the correct sequence. This is likely caused by a user-specified "{1}" command which is conflicting with the default formatting. + 类型为“{0}”的对象无效或顺序不正确。这可能是由于用户指定的 "{1}" 命令与默认格式冲突所致。 - Cannot open file "{0}". + 无法打开文件“{0}”。 - Output to File + 输出到文件 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/zh-Hant/CimInstanceTypeAdapterResources.zh-Hant.resx b/src/System.Management.Automation/resources/zh-Hant/CimInstanceTypeAdapterResources.zh-Hant.resx index 4f3fda63c2e..895a061e169 100644 --- a/src/System.Management.Automation/resources/zh-Hant/CimInstanceTypeAdapterResources.zh-Hant.resx +++ b/src/System.Management.Automation/resources/zh-Hant/CimInstanceTypeAdapterResources.zh-Hant.resx @@ -118,10 +118,10 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot convert "{0}" to an object of type "{1}". + 無法將 "{0}" 轉換為 "{1}" 類型的物件。 - "{0}" is a ReadOnly property. + "{0}" 是唯讀屬性。 {0} gets property name \ No newline at end of file diff --git a/src/System.Management.Automation/resources/zh-Hant/ConsoleInfoErrorStrings.zh-Hant.resx b/src/System.Management.Automation/resources/zh-Hant/ConsoleInfoErrorStrings.zh-Hant.resx index 2b7c8007e1e..1932576ac86 100644 --- a/src/System.Management.Automation/resources/zh-Hant/ConsoleInfoErrorStrings.zh-Hant.resx +++ b/src/System.Management.Automation/resources/zh-Hant/ConsoleInfoErrorStrings.zh-Hant.resx @@ -118,36 +118,36 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Incorrect PowerShell version {0}. PowerShell version {1} is supported on this computer. + PowerShell 版本 {0} 不正確。此電腦支援 PowerShell 版本 {1}。 - The following errors occurred when loading console {0}: {1} + 載入主控台 {0} 時發生下列錯誤: {1} - Cannot load PowerShell snap-in {0} because of the following error: {1} + 無法載入 PowerShell 嵌入式管理單元 {0}，因為發生下列錯誤: {1} - PowerShell snap-in "{0}" loaded with the following warnings: {1} + PowerShell 嵌入式管理單元 "{0}" 載入時出現下列警告: {1} - The PowerShell snap-in module {0} does not have the required PowerShell snap-in strong name {1}. + PowerShell 嵌入式管理單元模組 {0} 沒有必要的 PowerShell 嵌入式管理單元強式名稱 {1}。 - The cmdlet '{0}' should not occur more than once in PowerShell snap-in '{1}'. + Cmdlet '{0}' 在 PowerShell 嵌入式管理單元 '{1}' 中不應出現超過一次。 - PowerShell provider '{0}' should not occur more than once in PowerShell snap-in '{1}'. + PowerShell 提供者 '{0}' 在 PowerShell 嵌入式管理單元 '{1}' 中不應出現超過一次。 - PowerShell {0} is not supported in the current console. PowerShell {1} is supported in the current console. + 目前主控台不支援 PowerShell {0}。目前主控台支援 PowerShell {1}。 - File {0} already exists and {1} was specified. + 檔案 {0} 已經存在，且已指定 {1}。 - The provided configuration file '{0}' does not exist. + 提供的設定檔 '{0}' 不存在。 - The provided configuration file '{0}' must have a .pssc file extension. + 提供的設定檔 '{0}' 必須具有 .pssc 副檔名。 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/zh-Hant/EnumExpressionEvaluatorStrings.zh-Hant.resx b/src/System.Management.Automation/resources/zh-Hant/EnumExpressionEvaluatorStrings.zh-Hant.resx index 8faa9a881bd..372aba7b16f 100644 --- a/src/System.Management.Automation/resources/zh-Hant/EnumExpressionEvaluatorStrings.zh-Hant.resx +++ b/src/System.Management.Automation/resources/zh-Hant/EnumExpressionEvaluatorStrings.zh-Hant.resx @@ -118,31 +118,31 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The input expression must not be empty. Specify at least one identifier name in each input expression. + 輸入運算式不可為空白。請在每個輸入運算式中至少指定一個識別碼名稱。 - Unable to match an empty identifier name to a valid enumerator name. Specify one of the following enumerator names and retry: {0}. + 無法將空白識別碼名稱與有效的列舉程式名稱做比對。請指定下列其中一個列舉值名稱，然後重試: {0}。 - The generic type specified for the expression must represent an enum. Specify a valid enum type. + 為運算式指定的泛型型別必須代表列舉。請指定有效的列舉型別。 - The identifier name {0} cannot be processed because it is either too similar or identical to the following enumerator names: {1}. Use a more specific identifier name. + 無法處理識別碼名稱 {0}，因為它與下列列舉值名稱太相似或完全相同: {1}。請使用更具體的識別碼名稱。 - Unable to match the identifier name {0} to a valid enumerator name. Specify one of the following enumerator names and try again: + 無法將識別碼名稱 {0} 與有效的列舉程式名稱做比對。請指定下列其中一個列舉程式名稱，然後再試一次: {1} - Use of parentheses is not valid in the expression because identifier grouping is not allowed. Try removing the parentheses, or if a subexpression is enclosed, try expanding the expression. + 運算式中不允許識別碼分組，因此無法使用括號。請嘗試移除括號；如果括號內包含子運算式，請嘗試展開該運算式。 - Unable to parse the expression due to an unexpected token. Only an OR (,) operator or AND (+) operator is expected after an identifier name. + 因為出現未預期的 Token，所以無法剖析運算式。識別碼名稱之後只能接 OR (,) 運算子或 AND (+) 運算子。 - Unable to parse the expression due to an unexpected token after a NOT (!) operator. An identifier name is expected after a NOT (!) operator. + 因為 NOT (!) 後出現未預期的 Token，所以無法剖析運算式。NOT (!) 運算子後面必須是識別碼名稱。 - Unable to parse the expression due to an unexpected token. An identifier name or a NOT (!) operator is expected at the start of the expression, or after an OR (,) operator or an AND (+) operator. Also, an expression must not end with an OR (,), AND (+) or NOT (!) operator. + 因為出現未預期的 Token，所以無法剖析運算式。在運算式開頭，或在 OR (,) 運算子或 AND (+) 運算子之後，必須有識別項名稱或 NOT (!) 運算子。此外，運算式結尾不能是 OR (,)、AND (+) 或 NOT (!) 運算子。 \ No newline at end of file From 9a3fa1c634028c97eef40dcef2c7b5595cab24d8 Mon Sep 17 00:00:00 2001 From: olprod Date: Fri, 14 Aug 2026 12:26:07 -0700 Subject: [PATCH 3/7] Localized file check-in by OneLocBuild Task: Build definition ID 13420: Build ID 2677113 --- .../resources/cs/HelpDisplayStrings.cs.resx | 226 ++-- .../resources/cs/ParserStrings.cs.resx | 832 +++++++------- .../resources/de/HelpDisplayStrings.de.resx | 220 ++-- .../de/InternalCommandStrings.de.resx | 44 +- .../InternalHostUserInterfaceStrings.de.resx | 76 +- .../resources/de/MiniShellErrors.de.resx | 4 +- .../resources/de/NativeCP.de.resx | 18 +- .../resources/de/RunspaceInit.de.resx | 74 +- .../resources/es/HistoryStrings.es.resx | 22 +- .../es/InternalCommandStrings.es.resx | 44 +- .../InternalHostUserInterfaceStrings.es.resx | 74 +- .../resources/es/MiniShellErrors.es.resx | 4 +- .../resources/es/NativeCP.es.resx | 18 +- .../resources/es/RunspaceInit.es.resx | 74 +- .../resources/fr/HelpDisplayStrings.fr.resx | 220 ++-- .../resources/fr/HistoryStrings.fr.resx | 22 +- .../InternalHostUserInterfaceStrings.fr.resx | 76 +- .../resources/fr/MiniShellErrors.fr.resx | 4 +- .../resources/fr/NativeCP.fr.resx | 18 +- .../resources/fr/RunspaceInit.fr.resx | 74 +- .../resources/it/NativeCP.it.resx | 18 +- .../resources/it/RunspaceInit.it.resx | 74 +- .../ja/InternalCommandStrings.ja.resx | 46 +- .../InternalHostUserInterfaceStrings.ja.resx | 76 +- .../resources/ja/MiniShellErrors.ja.resx | 4 +- .../resources/ja/NativeCP.ja.resx | 18 +- .../resources/ja/RunspaceInit.ja.resx | 74 +- .../resources/pl/GetErrorText.pl.resx | 18 +- .../InternalHostUserInterfaceStrings.pl.resx | 76 +- .../resources/pl/NativeCP.pl.resx | 18 +- .../resources/pl/ParserStrings.pl.resx | 832 +++++++------- .../resources/pl/RunspaceInit.pl.resx | 74 +- .../resources/ru/MiniShellErrors.ru.resx | 4 +- .../resources/ru/NativeCP.ru.resx | 18 +- .../ru/RemotingErrorIdStrings.ru.resx | 1018 ++++++++--------- .../resources/ru/RunspaceInit.ru.resx | 74 +- .../resources/tr/MiniShellErrors.tr.resx | 4 +- .../resources/tr/RunspaceInit.tr.resx | 74 +- .../zh-Hans/GetErrorText.zh-Hans.resx | 18 +- .../zh-Hans/HelpDisplayStrings.zh-Hans.resx | 230 ++-- ...ernalHostUserInterfaceStrings.zh-Hans.resx | 76 +- .../zh-Hans/MiniShellErrors.zh-Hans.resx | 4 +- .../resources/zh-Hans/NativeCP.zh-Hans.resx | 18 +- .../zh-Hans/RunspaceInit.zh-Hans.resx | 74 +- .../zh-Hant/GetErrorText.zh-Hant.resx | 18 +- .../zh-Hant/HistoryStrings.zh-Hant.resx | 22 +- .../InternalCommandStrings.zh-Hant.resx | 46 +- ...ernalHostUserInterfaceStrings.zh-Hant.resx | 76 +- .../zh-Hant/MiniShellErrors.zh-Hant.resx | 4 +- .../zh-Hant/RunspaceInit.zh-Hant.resx | 74 +- 50 files changed, 2662 insertions(+), 2662 deletions(-) diff --git a/src/System.Management.Automation/resources/cs/HelpDisplayStrings.cs.resx b/src/System.Management.Automation/resources/cs/HelpDisplayStrings.cs.resx index 5dff86b74e3..47909d8aa32 100644 --- a/src/System.Management.Automation/resources/cs/HelpDisplayStrings.cs.resx +++ b/src/System.Management.Automation/resources/cs/HelpDisplayStrings.cs.resx @@ -121,172 +121,172 @@ NÁZEV - SYNOPSIS + SYNOPSE - DESCRIPTION + POPIS - SYNTAX + SYNTAXE - PARAMETERS + PARAMETRY - INPUTS + VSTUP - OUTPUTS + VÝSTUP - TERMINATING ERRORS + UKONČUJÍCÍ CHYBY - NON-TERMINATING ERRORS + NEUKONČUJÍCÍ CHYBY - NOTES + POZNÁMKY - EXAMPLES + PŘÍKLADY Příklad - EXAMPLE + PŘÍKLAD - OUTPUT + VÝSTUP - RELATED LINKS + SOUVISEJÍCÍ ODKAZY - SHORT DESCRIPTION + KRÁTKÝ POPIS - Title: + Název: - Question: + Otázka: Odpověď - Term: + Období: - Definition: + Definice: - Content: + Obsah: - PROVIDER NAME + NÁZEV POSKYTOVATELE - This cmdlet supports the common parameters: Verbose, Debug, + Tato rutina podporuje společné parametry: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, WarningVariable, - OutBuffer, PipelineVariable, and OutVariable. For more information, see + OutBuffer, PipelineVariable a OutVariable. Další informace viz about_CommonParameters (https://go.microsoft.com/fwlink/?LinkID=113216). - Required? + Požadováno? - Position? + Pozice? - Type: + Typ: - Target Object Type: + Typ cílového objektu: - Default value + Výchozí hodnota - Accept pipeline input? + Přijmout vstup z kanálu? - Accept wildcard characters? + Jsou podporovány zástupné znaky? - (Category: + (Kategorie: - Suggested Action: + Navrhovaná akce: - For more information, type: + Další informace získáte zadáním: - For technical information, type: + Pokud potřebujete technické informace, zadejte: - To see the examples, type: + Pokud chcete zobrazit příklady, zadejte: - For online help, type: + Chcete-li získat online nápovědu, zadejte: <CommonParameters> - REMARKS + POZNÁMKY true - Named + Pojmenované - DRIVES + JEDNOTKY - CAPABILITIES + SCHOPNOSTI - TASKS + ÚLOHY - TASK: + ÚLOHA: - FILTERS + FILTRY - DYNAMIC PARAMETERS + DYNAMICKÉ PARAMETRY - Cmdlets Supported: + Podporované rutiny: - ALIASES + ALIASY - Get-Help cannot find the Help files for this cmdlet on this computer. It is displaying only partial help. - -- To download and install Help files for the module that includes this cmdlet, use Update-Help. - -- To view the Help topic for this cmdlet online, type: "Get-Help {0} -Online" or - go to {1}. + Get-Help nemůže v tomto počítači najít soubory nápovědy pro tuto rutinu. Zobrazuje pouze částečnou nápovědu. + -- Pokud chcete stáhnout a nainstalovat soubory nápovědy pro modul, který obsahuje tuto rutinu, použijte Update-Help. + Pokud chcete zobrazit téma nápovědy pro tuto rutinu online, zadejte: Get-Help {0} -Online nebo + přejděte na {1}. Žádné - Aliases + Aliasy - Dynamic? + Dynamické? - Parameter set name + Název sady parametrů - Unable to retrieve the HelpInfo XML file for UI culture {0}. Make sure the HelpInfoUri property in the module manifest is valid or check your network connection and then try the command again. + Nepodařilo se načíst soubor XML HelpInfo pro jazykovou verzi uživatelského rozhraní {0}. Ověřte, že je vlastnost HelpInfoUri v manifestu modulu platná, nebo zkontrolujte síťové připojení a pak příkaz spusťte znovu. ByPropertyName @@ -298,176 +298,176 @@ FromRemainingArguments - The specified culture is not supported: {0}. Specify a culture from the following list: {{{1}}}. + Zadaná jazyková verze není podporována: {0}. Zadejte jazykovou verzi z následujícího seznamu: {{{1}}}. - Postponing error and trying fallback cultures, will show as error if none of fallbacks are supported: + Odkládá chybu a zkouší záložní jazykové verze. Pokud není podporována žádná záložní verze, zobrazí se jako chyba: {0} - The ModuleBase directory cannot be found. Verify the directory and try again. + Adresář ModuleBase nelze najít. Ověřte adresář a zkuste to znovu. - The path {0} is not a valid directory. Make sure the directory exists and retry. + Cesta {0} není platný adresář. Ujistěte se, že adresář existuje, a zkuste to znovu. - A Help URI cannot contain more than 10 redirections. Specify a valid Help URI. + Identifikátor URI nápovědy nemůže obsahovat více než 10 přesměrování. Zadejte platný identifikátor URI nápovědy. - Updating Help + Aktualizuje se nápověda. - Connecting to Help Content... + Připojování k obsahu nápovědy... - Downloading Help Content... + Stahuje se obsah nápovědy... - Installing Help content... + Instaluje se obsah nápovědy... - Locating Help Content... + Vyhledává se obsah nápovědy... - (All) + (vše) - No PowerShell modules were found that match the following pattern: {0}. Verify the pattern and then try the command again. + Nebyly nalezeny žádné moduly PowerShellu odpovídající následujícímu vzoru: {0}. Ověřte vzor a potom příkaz opakujte. - No PowerShell modules were found that match the specified FullyQualifiedModule {0}. Verify the FullyQualifiedModule value and then try the command again. + Nebyly nalezeny žádné moduly PowerShellu, které odpovídají zadanému FullyQualifiedModule {0}. Ověřte hodnotu FullyQualifiedModule a potom příkaz spusťte znovu. - Help content cannot be found. Make sure the server is available and the help content location is properly defined in the HelpInfo XML. + Obsah nápovědy nebyl nalezen. Ujistěte se, že je server dostupný a že je umístění obsahu nápovědy správně definováno v souboru XML HelpInfo. - The Update-Help command failed because the specified module does not support updatable help. Use Get-Help -Online or look online for help for the commands in this module. + Příkaz Update-Help selhal, protože zadaný modul nepodporuje aktualizovatelnou nápovědu. Použijte Get-Help -Online nebo vyhledejte online nápovědu k příkazům v tomto modulu. - The following parameter must not be null or empty: Module. + Následující parametr nesmí mít hodnotu null ani být prázdný: Module. - The following parameter must not be null or empty: Path. + Následující parametr nesmí mít hodnotu null ani být prázdný: Path. - Update-Help has completed successfully. + Operace Update-Help byla úspěšně dokončena. - Error extracting Help content. + Při extrahování obsahu nápovědy došlo k chybě. - Unable to connect to Help content. The server on which Help content is stored might not be available. Verify that the server is available, or wait until the server is back online, and then try the command again. + Nelze se připojit k obsahu nápovědy. Server, na kterém je uložen obsah nápovědy, nemusí být dostupný. Ověřte, že je server dostupný, nebo počkejte, až bude server znovu online, a pak příkaz spusťte znovu. - The Help content at the specified location is not valid. Specify a location that contains valid Help Content. + Obsah nápovědy v zadaném umístění není platný. Zadejte umístění, které obsahuje platný obsah nápovědy. - The HelpInfo XML is not valid. Specify valid HelpInfo XML. + Soubor XML HelpInfo není platný. Zadejte platný kód XML HelpInfo. - Help content was successfully saved to the following location: {0} + Obsah nápovědy byl úspěšně uložen do tohoto umístění: {0} - The Help content XSD file cannot be found in {0}. Verify that the XSD file exists at the specified location, and then retry the command. + Soubor XSD obsahu nápovědy nelze v {0} najít. Ověřte, že soubor XSD v zadaném umístění existuje, a pak příkaz zkuste spustit znovu. - Failed to update Help for the module(s) : -'{0}' + Nepodařilo se aktualizovat nápovědu pro moduly: +{0} {1} - Saving Help + Ukládá se nápověda. - Help content contains files that are not valid. Only .txt and .xml files are supported. + Obsah nápovědy obsahuje neplatné soubory. Podporovány jsou pouze soubory .txt a .xml. - Failed to save Help for the module(s) '{0}' : {1} + Nepodařilo se uložit nápovědu pro moduly {0}: {1} - Failed to save Help for the module(s) '{0}' with UI culture(s) {{{1}}} : {2}. -English-US help content is available and can be saved using: Save-Help -UICulture en-US. + Nepodařilo se uložit nápovědu pro moduly {0} s jazykovými verzemi uživatelského rozhraní {{{1}}}: {2}. +Obsah nápovědy pro angličtinu (USA) je k dispozici a lze ho uložit pomocí příkazu Save-Help -UICulture en-US. - Failed to update Help for the module(s) '{0}' with UI culture(s) {{{1}}} : {2}. -English-US help content is available and can be installed using: Update-Help -UICulture en-US. + Nepodařilo se aktualizovat nápovědu pro moduly {0} s jazykovými verzemi uživatelského rozhraní {{{1}}} : {2}. +Obsah nápovědy pro angličtinu (USA) je k dispozici a lze ho nainstalovat pomocí příkazu Update-Help -UICulture en-US. - Your current culture is ({0}), which is not associated with any language, consider changing your system culture or install the English-US help content using: Update-Help -UICulture en-US. + Vaše aktuální jazyková verze je {0} a není přidružená k žádnému jazyku. Zvažte změnu jazykové verze systému nebo instalaci obsahu nápovědy pro angličtinu (USA) pomocí příkazu Update-Help -UICulture en-US. false - The -Recurse parameter is only available if a source path is specified. + Parametr -Recurse je k dispozici pouze v případě, že je zadána zdrojová cesta. - The path {0} does not contain a FileSystem provider. Verify that the specified path contains the FileSystem provider, and then retry the command. + Cesta {0} neobsahuje poskytovatele FileSystem. Ověřte, že zadaná cesta obsahuje poskytovatele FileSystem, a pak příkaz zkuste spustit znovu. - Searching Help for {0} ... + Hledání v nápovědě pro {0}... - No UI culture was found that matches the following pattern: {0}. Verify the pattern and then try the command again. + Nebyla nalezena žádná jazyková verze uživatelského rozhraní odpovídající následujícímu vzoru: {0}. Ověřte vzor a potom příkaz opakujte. - Help was not saved for the module {0}, because the Save-Help command was run on this computer within the last 24 hours. -To save help again, add the Force parameter to your command. + Nápověda pro modul {0} nebyla uložena, protože příkaz Save-Help byl na tomto počítači spuštěn během posledních 24 hodin. +Pokud chcete nápovědu znovu uložit, přidejte do příkazu parametr Force. - Help was not updated for the module {0}, because the Update-Help command was run on this computer within the last 24 hours. -To update help again, add the Force parameter to your command. + Nápověda pro modul {0} nebyla aktualizována, protože příkaz Update-Help byl na tomto počítači spuštěn během posledních 24 hodin. +Pokud chcete nápovědu znovu aktualizovat, přidejte do příkazu parametr Force. - The most current Help files are already installed. + Nejnovější soubory nápovědy už jsou nainstalované. - {0}: {1}. Culture {2} Version {3} + {0}: {1}. Verze jazykové verze {2}: {3} - Updated {0} + Aktualizováno: {0} - The value of the HelpInfoUri key in the module manifest must resolve to a container or root URL on a website where the help files are stored. The HelpInfoUri '{0}' does not resolve to a container. + Hodnota klíče HelpInfoUri v manifestu modulu se musí přeložit na adresu URL kontejneru nebo kořenovou adresu URL na webu, kde jsou uložené soubory nápovědy. Identifikátor HelpInfoUri {0} se nepřekládá na kontejner. - Help content must be in the namespace {0}. + Obsah nápovědy musí být v oboru názvů {0}. - Get-Help cannot find the Help files for this cmdlet on this computer. It is displaying only partial help. - -- To download and install Help files for the module that includes this cmdlet, use Update-Help. + Get-Help nemůže v tomto počítači najít soubory nápovědy pro tuto rutinu. Zobrazuje pouze částečnou nápovědu. + -- Pokud chcete stáhnout a nainstalovat soubory nápovědy pro modul, který obsahuje tuto rutinu, použijte Update-Help. - The most current Help files are already downloaded. + Nejaktuálnější soubory nápovědy jsou již staženy. - Saved {0} + Uloženo: {0} - The HelpInfoURI {0} does not start with HTTP. + Identifikátor HelpInfoURI {0} nezačíná řetězcem HTTP. - The root level element of the help content must be "helpItems". + Kořenovým prvkem obsahu nápovědy musí být „helpItems“. - Saving Help for module {0} + Ukládá se nápověda pro modul {0}. - Updating Help for module {0} + Aktualizuje se nápověda pro modul {0} - Resolving URI: "{0}" + Překládá se identifikátor URI: {0}. - Help URI: {0} + Identifikátor URI nápovědy: {0} - {0}, Current Version: {1}, Available Version: {2}, UICulture: {3} + {0}, aktuální verze: {1}, dostupná verze: {2}, jazyková verze uživatelského rozhraní (UICulture): {3} - PROPERTIES + VLASTNOSTI - METHODS + METODY \ No newline at end of file diff --git a/src/System.Management.Automation/resources/cs/ParserStrings.cs.resx b/src/System.Management.Automation/resources/cs/ParserStrings.cs.resx index ad629ff5a40..8519582226f 100644 --- a/src/System.Management.Automation/resources/cs/ParserStrings.cs.resx +++ b/src/System.Management.Automation/resources/cs/ParserStrings.cs.resx @@ -118,1259 +118,1259 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Unable to find type [{0}]. + Typ [{0}] nejde najít. - Unable to find type [{0}]. Details: {1} + Typ [{0}] nejde najít. Podrobnosti: {1} - Incomplete string token. + Neúplný token řetězce. The Unicode escape sequence is not valid. A valid sequence is `u{ followed by one to six hex digits and a closing '}'. - The Unicode escape sequence value is out of range. The maximum value is 0x10FFFF. + Hodnota řídicí sekvence Unicode je mimo rozsah. Maximální hodnota je 0x10FFFF. - The Unicode escape sequence is missing the closing '}'. + V řídicí sekvenci Unicode chybí ukončovací }. - The Unicode escape sequence contains more than the maximum of six hex digits between braces. + Řídicí sekvence Unicode obsahuje mezi složenými závorkami více než maximálních šest šestnáctkových číslic. - Cannot use [ref] with other types in a type constraint. + [ref] nejde v omezení typu použít s jinými typy. - [ref] can only be the final type in type conversion sequence. + [ref] může být v posloupnosti převodu typů jen posledním typem. - Cannot have two occurrences of [ref] in a type sequence. + V posloupnosti typů nemůžou být dva výskyty [ref]. - The numeric constant {0} is not valid. + Číselná konstanta {0} není platná. - The regular expression pattern {0} is not valid. + Vzor regulárního výrazu {0} není platný. - An empty ${} variable reference was found. A name is required inside the braces. + Byl nalezen prázdný odkaz na proměnnou ${}. Uvnitř složených závorek je vyžadovaný název. - Variable reference is not valid. '$' was not followed by a valid variable name character. Consider using ${} to delimit the name. + Odkaz na proměnnou není platný. Za $ nenásledoval platný znak názvu proměnné. Zvažte použití ${} k oddělení názvu. - You cannot call a method on a null-valued expression. + Metodu nelze volat u výrazu s hodnotou null. - Method invocation failed because [{0}] does not contain a method named '{1}'. + Vyvolání metody se nepovedlo, protože [{0}] neobsahuje metodu s názvem {1}. - Assignment failed because [{0}] does not contain a property '{1}()' that can be set. + Přiřazení se nepovedlo, protože [{0}] neobsahuje nastavitelnou vlastnost {1}(). - Unexpected token '{0}' in expression or statement. + Neočekávaný token {0} ve výrazu nebo příkazu. - The splatting operator '@' cannot be used to reference variables in an expression. '@{0}' can be used only as an argument to a command. To reference variables in an expression use '${0}'. + Operátor rozbalení @ nejde použít k odkazování na proměnné ve výrazu. @{0} je možné použít jen jako argument příkazu. K odkazování na proměnné ve výrazu použijte ${0}. - Parameter '{0}' is not valid + Parametr {0} není platný - Missing expression after '{0}' in pipeline element. + Za {0} v prvku kanálu chybí výraz. - The expression after '{0}' in a pipeline element produced an object that was not valid. It must result in a command name, a script block, or a CommandInfo object. + Výraz za {0} v prvku kanálu vytvořil neplatný objekt. Výsledkem musí být název příkazu, blok skriptu nebo objekt CommandInfo. - Parameter {0} requires an argument. + Parametr {0} vyžaduje argument. - Parameter {0} cannot have an argument. + Parametr {0} nemůže mít argument. - Duplicate parameter ${0} in parameter list. + Duplicitní parametr ${0} v seznamu parametrů. - Missing argument in parameter list. + V seznamu parametrů chybí argument. - Splatted variables like '@{0}' cannot be part of a comma-separated list of arguments. + Rozbalené proměnné, například @{0}, nemůžou být součástí seznamu argumentů oddělených čárkami. - Missing file specification after redirection operator. + Za operátorem přesměrování chybí specifikace souboru. - The '{0}' operator is reserved for future use. + Operátor {0} je vyhrazený pro budoucí použití. - Redirection to '{0}' failed: {1} + Přesměrování do {0} se nepovedlo: {1} - Expressions are only allowed as the first element of a pipeline. + Výrazy jsou povolené jen jako první prvek kanálu. - An empty pipe element is not allowed. + Prázdný prvek kanálu není povolený. - The assignment expression is not valid. The input to an assignment operator must be an object that is able to accept assignments, such as a variable or a property. + Výraz přiřazení není platný. Vstupem operátoru přiřazení musí být objekt, který může přijímat přiřazení, například proměnná nebo vlastnost. - A hash table can only be added to another hash table. + Hashovací tabulku je možné přidat jen k jiné hashovací tabulce. - The right operand of '-is' must be a type. + Pravý operand operátoru -is musí být typ. - The right operand of '-as' must be a type. + Pravý operand operátoru -as musí být typ. - Error formatting a string: {0}. + Chyba při formátování řetězce: {0}. - The argument to operator '{0}' is not valid: {1}. + Argument operátoru {0} není platný: {1}. - The '{0}' operator failed: {1}. + Operátor {0} selhal: {1}. - The {0} operator allows only two elements to follow it, not {1}. + Za operátorem {0} můžou následovat jen dva prvky, ne {1}. - You must provide a value expression following the '{0}' operator. + Za operátorem {0} musíte zadat výraz s hodnotou. - The '{0}' operator works only on variables or on properties. + Operátor {0} funguje jen s proměnnými nebo vlastnostmi. - The {0} attribute can be specified only on a hash literal node. + Atribut {0} je možné zadat jen v uzlu literálu hashovací tabulky. - Array index expression is missing or not valid. + Výraz indexu pole chybí nebo není platný. - Missing property name after reference operator. + Za operátorem odkazu chybí název vlastnosti. - The property '{0}' cannot be found on this object. Verify that the property exists and can be set. + Vlastnost {0} se u tohoto objektu nepodařilo najít. Ověřte, že vlastnost existuje a je možné ji nastavit. - The property '{0}' cannot be found on this object. Verify that the property exists. + Vlastnost {0} se u tohoto objektu nepodařilo najít. Ověřte, že vlastnost existuje. - Index operation failed; the array index evaluated to null. + Operace indexování se nepovedla. Index pole byl vyhodnocen jako null. - Cannot index into a null array. + Do pole s hodnotou null nejde indexovat. - Unable to index into an object of type "{0}". + Do objektu typu {0} nejde indexovat. - Unable to index into an object of type "{0}" with the ByRef-like return type "{1}". ByRef-like types are not supported in PowerShell. + Do objektu typu {0} s návratovým typem podobným ByRef {1} nejde indexovat. PowerShell nepodporuje typy podobné ByRef. - The array has too many dimensions: {0}. The number of dimensions for an array must be less than or equal to 32. + Pole má příliš mnoho rozměrů: {0}. Počet rozměrů pole musí být menší nebo roven 32. - Array assignment to [{0}] failed because assignment to slices is not supported. + Přiřazení pole k [{0}] se nepovedlo, protože přiřazení k řezům není podporované. - You cannot index into a {0} dimensional array with index [{1}]. + Do pole s počtem rozměrů {0} nejde indexovat pomocí indexu [{1}]. - Array assignment failed because index '{0}' was out of range. + Přiřazení pole se nepovedlo, protože index {0} je mimo rozsah. - Missing expression after '{0}'. + Za {0} chybí výraz. - ${{variable}} reference starting is missing the closing '}}'. + V odkazu ${{variable}} chybí ukončovací }}. - $(subexpression) is missing the closing ')'. + V $(subexpression) chybí ukončovací ). - Internal error - unexpected unary operator {0}. + Interní chyba – neočekávaný unární operátor {0}. - [ref] cannot be applied to a variable that does not exist. + [ref] nejde použít na proměnnou, která neexistuje. - The variable '${0}' cannot be retrieved because it has not been set. + Proměnnou ${0} nejde načíst, protože nebyla nastavená. - Duplicate keys '{0}' are not allowed in hash literals. + Duplicitní klíče {0} nejsou v literálech hashovací tabulky povolené. - Duplicate named arguments '{0}' are not allowed. + Duplicitní pojmenované argumenty {0} nejsou povolené. - The '{0}' operator works only on numbers. The operand is a '{1}'. + Operátor {0} funguje jen s čísly. Operand je {1}. - An expression was expected after '('. + Za ( se očekával výraz. - Missing '=' operator after key in hash literal. + Za klíčem v literálu hashovací tabulky chybí operátor =. - Missing statement after '=' in hash literal. + Za = v literálu hashovací tabulky chybí příkaz. - Missing statement after '=' in named argument. + Za = v pojmenovaném argumentu chybí příkaz. - Missing ';' or end-of-line in property definition. + V definici vlastnosti chybí ; nebo konec řádku. - Missing expression after unary operator '{0}'. + Za unárním operátorem {0} chybí výraz. - Missing condition in if statement after '{0} ('. + V příkazu if chybí podmínka za {0} (. - Missing statement block after {0} ( condition ). + Za {0} ( condition ) chybí blok příkazů. - Missing statement block after 'else' keyword. + Za klíčovým slovem else chybí blok příkazů. - The file could not be read: {0}. + Soubor se nepodařilo načíst: {0}. - The current provider ({0}) cannot open a file. + Aktuální zprostředkovatel ({0}) nemůže otevřít soubor. - No files matching '{0}' were found. + Nenašly se žádné soubory odpovídající {0}. - The path cannot be processed because it resolved to more than one file; only one file at a time can be processed. + Cestu nejde zpracovat, protože se přeložila na více než jeden soubor. Zpracovat je možné vždy jen jeden soubor. - The {0} '-{1}' parameter is reserved for future use. + Parametr {0} -{1} je vyhrazený pro budoucí použití. - Cannot process the 'switch' statement because of a missing file name argument to the -file option. + Příkaz switch nejde zpracovat, protože u možnosti -file chybí argument názvu souboru. - The file name argument to -file in the switch statement is not valid. + Argument názvu souboru pro -file v příkazu switch není platný. - The parameter {0} is not valid for the switch statement. + Parametr {0} není pro příkaz switch platný. - The parameter {0} is not valid for the foreach statement. + Parametr {0} není pro příkaz foreach platný. - A switch statement must have one of the following: '-file file_name' or '( expression )'. + Příkaz switch musí obsahovat jednu z následujících možností: -file file_name nebo ( expression ). - Missing condition in switch statement clause. + V klauzuli příkazu switch chybí podmínka. - A switch statement can have only one default clause. + Příkaz switch může mít jen jednu výchozí klauzuli. - Missing statement block in switch statement clause. + V klauzuli příkazu switch chybí blok příkazů. - Missing expression in foreach loop. -The correct form is: foreach ($a in $b) {...} + Ve smyčce foreach chybí výraz. +Správný tvar je: foreach ($a in $b) {...} - Missing statement body in foreach loop. -The correct form is: foreach ($a in $b) {...} + Ve smyčce foreach chybí tělo příkazu. +Správný tvar je: foreach ($a in $b) {...} - The param statement cannot be used if arguments were specified in the function declaration. + Příkaz param nejde použít, pokud byly v deklaraci funkce zadané argumenty. - The operation '[{0}] {1} [{2}]' is not defined. + Operace [{0}] {1} [{2}] není definovaná. - An error occurred while enumerating through a collection: {0}. + Při procházení kolekce došlo k chybě: {0}. - An unhandled COM interop exception occurred: {0} + Došlo k neošetřené výjimce interoperability COM: {0} - A COM object was accessed after it was already released: {0} + K objektu COM se přistoupilo poté, co už byl uvolněný: {0} - Processing was stopped because the script is too complex. + Zpracování se zastavilo, protože skript je příliš složitý. - The syntax is not supported by this runspace. This can occur if the runspace is in no-language mode. + Tato syntaxe není v tomto runspace podporovaná. K tomu může dojít, pokud je runspace v režimu bez jazyka. - The combination of options with the -split operator is not valid. + Kombinace možností s operátorem -split není platná. - Options are not allowed on the -split operator with a predicate. + Při použití predikátu nejsou u operátoru -split povolené možnosti. - The token '{0}' is not a valid statement separator in this version. + Token {0} není v této verzi platný oddělovač příkazů. - The '{0}' keyword is not supported in this version of the language. + Klíčové slovo {0} není v této verzi jazyka podporované. - Missing expression after '{0}' in loop. + Za {0} ve smyčce chybí výraz. - Missing statement body in {0} loop. + Ve smyčce {0} chybí tělo příkazu. - The 'trap' statement was incomplete. A trap statement requires a body. + Příkaz trap byl neúplný. Příkaz trap vyžaduje tělo. - Incomplete 'try' statement. A try statement requires a body. + Neúplný příkaz try. Příkaz try vyžaduje tělo. - Parameter declarations are a comma-separated list of variable names with optional initializer expressions. + Deklarace parametrů jsou seznam názvů proměnných oddělených čárkami s volitelnými inicializačními výrazy. - Missing function body in function declaration. + V deklaraci funkce chybí tělo funkce. - Script command clause '{0}' has already been defined. + Klauzule příkazu skriptu {0} už byla definovaná. - unexpected token '{0}', expected 'begin', 'process', 'end', 'clean', or 'dynamicparam'. + Neočekávaný token {0}. Očekávalo se begin, process, end, clean nebo dynamicparam. - Missing closing '}' in statement block or type definition. + V bloku příkazů nebo definici typu chybí ukončovací }. - Missing ')' in method call. + Ve volání metody chybí ). - Missing ']' after array index expression. + Za výrazem indexu pole chybí ]. - Missing closing ')' in expression. + Ve výrazu chybí ukončovací ). - Missing closing ')' in subexpression. + V podvýrazu chybí ukončovací ). - Missing '(' after '{0}' in if statement. + Za {0} v příkazu if chybí (. - Missing ')' after expression in switch statement. + Za výrazem v příkazu switch chybí ). - Missing '{' in switch statement. + V příkazu switch chybí {. - Missing variable name after foreach. -The correct form is: foreach ($a in $b) {...} + Za foreach chybí název proměnné. +Správný tvar je: foreach ($a in $b) {...} - Missing 'in' after variable in foreach loop. -The correct form is: foreach ($a in $b) {...} + Ve smyčce foreach chybí za proměnnou in. +Správný tvar je: foreach ($a in $b) {...} - Missing closing ')' after expression part of foreach loop. -The correct form is: foreach ($a in $b) {...} + Za výrazovou částí smyčky foreach chybí ukončovací ). +Správný tvar je: foreach ($a in $b) {...} - Missing opening '(' after keyword '{0}'. + Za klíčovým slovem {0} chybí otevírací (. - Missing while or until keyword in do loop. + Ve smyčce do chybí klíčové slovo while nebo until. - Missing closing ')' after expression in '{0}' statement. + Za výrazem v příkazu {0} chybí ukončovací ). - Missing name after {0} keyword. + Za klíčovým slovem {0} chybí název. - Missing ')' in function parameter list. + V seznamu parametrů funkce chybí ). - An error '{0}' occurred while processing this script. Text describing this error could not be loaded. + Při zpracování tohoto skriptu došlo k chybě {0}. Text popisující tuto chybu se nepodařilo načíst. - An error '{0}' occurred while processing this script. Text describing this error could not be loaded due to error '{1}'. + Při zpracování tohoto skriptu došlo k chybě {0}. Text popisující tuto chybu se kvůli chybě {1} nepodařilo načíst. - There is no Runspace available to run scripts in this thread. You can provide one in the DefaultRunspace property of the System.Management.Automation.Runspaces.Runspace type. The script block you attempted to invoke was: {0} + V tomto vlákně není k dispozici žádný Runspace pro spouštění skriptů. Můžete ho zadat ve vlastnosti DefaultRunspace typu System.Management.Automation.Runspaces.Runspace. Blok skriptu, který jste se pokusili vyvolat, byl: {0} - Unrecognized token in source text. + Ve zdrojovém textu byl nerozpoznaný token. - Action to take for this exception: + Akce, která se má provést při této výjimce: - &Continue + &Pokračovat - Report the error then continue with the next script statement. + Nahlaste chybu a potom pokračujte dalším příkazem skriptu. - S&ilently Continue + Pokračovat &bez upozornění - Do not report this error, just continue with the next script statement. + Tuto chybu nehlaste. Pokračujte dalším příkazem skriptu. - &Break + Přer&ušit - Do not continue processing, throw the exception instead. + Nepokračujte ve zpracování a místo toho vyvolejte výjimku. - &Suspend + &Pozastavit - Pause the current pipeline and return to the command prompt. Type exit to resume operation when you are done. + Pozastavit aktuální kanál a vrátit se na příkazový řádek. Po dokončení operace můžete pokračovat zadáním příkazu exit. - Cannot run a document in the middle of a pipeline: {0}. + Dokument nejde spustit uprostřed kanálu: {0}. - Program '{0}' failed to run: {1}{2}. + Program {0} se nepodařilo spustit: {1}{2}. - Cannot use '&' to invoke in the context of binary module '{0}'. Specify a non-binary module after the '&' and try the operation again. + Operátor & nejde použít k vyvolání v kontextu binárního modulu {0}. Za operátorem & zadejte nebinární modul a zkuste operaci znovu. - Cannot use '&' to invoke in the context of module '{0}' because it is not imported. Import the module '{0}' and try the operation again. + Operátor & nejde použít k vyvolání v kontextu modulu {0}, protože modul není importovaný. Importujte modul {0} a zkuste operaci znovu. - Executable script code found in signature block. + V bloku podpisu byl nalezen spustitelný kód skriptu. - line + řádek - At {0}:{1} char:{2} + Na {0}:{1} znak:{2} + {3} {0,4}+ {1} - ! SET ${0} = '{1}'. + ! SET ${0} = {1}. - ! CALL function '{0}' + ! VOLÁNÍ funkce {0} - ! CALL function '{0}' (defined in file '{1}') + ! VOLÁNÍ funkce {0} (definované v souboru {1}) - ! CALL method '{0}' + ! VOLÁNÍ metody {0} - The string is missing the terminator: {0}. + V řetězci chybí ukončovací znak: {0}. - White space is not allowed before the string terminator. + Před ukončovacím znakem řetězce není povolená mezera. - Missing ] at end of type token. + Na konci tokenu typu chybí ]. - Use `{ instead of { in variable names. + V názvech proměnných použijte `{ místo {. - The Data section is missing its statement block. + Oddílu Data chybí blok příkazů. - The "{0}" parameter of the Data section is not valid. The valid Data section parameter is SupportedCommand. + Parametr {0} oddílu Data není platný. Platný parametr oddílu Data je SupportedCommand. - Array references are not allowed in restricted language mode or a Data section. + Odkazy na pole nejsou povolené v režimu omezeného jazyka ani v oddílu Data. - Assignment statements are not allowed in restricted language mode or a Data section. + Příkazy přiřazení nejsou povolené v režimu omezeného jazyka ani v oddílu Data. - Redirection is not allowed in restricted language mode or a Data section. + Přesměrování není povolené v režimu omezeného jazyka ani v oddílu Data. - The Do and While statements are not allowed in restricted language mode or a Data section. + Příkazy Do a While nejsou povolené v režimu omezeného jazyka ani v oddílu Data. - Expandable strings are not allowed in restricted language mode or a Data section. + Rozbalitelné řetězce nejsou povolené v režimu omezeného jazyka ani v oddílu Data. - The '{0}' operator is not allowed in restricted language mode or a Data section. + Operátor {0} není povolený v režimu omezeného jazyka ani v oddílu Data. - The Trap statement is not allowed in restricted language mode or a Data section. + Příkaz Trap není povolený v režimu omezeného jazyka ani v oddílu Data. - The Try statement is not allowed in restricted language mode or a Data section. + Příkaz Try není povolený v režimu omezeného jazyka ani v oddílu Data. - Flow control statements such as Break, Continue, Return, Exit, and Throw are not allowed in restricted language mode or a Data section. + Příkazy řízení toku, například Break, Continue, Return, Exit a Throw, nejsou povolené v režimu omezeného jazyka ani v oddílu Data. - Foreach statements are not allowed in restricted language mode or a Data section. + Příkazy Foreach nejsou povolené v režimu omezeného jazyka ani v oddílu Data. - For and While statements are not allowed in restricted language mode or a Data section. + Příkazy For a While nejsou povolené v režimu omezeného jazyka ani v oddílu Data. - Function declarations are not allowed in restricted language mode or a Data section. + Deklarace funkcí nejsou povolené v režimu omezeného jazyka ani v oddílu Data. - Method calls are not allowed in restricted language mode or a Data section. + Volání metod nejsou povolená v režimu omezeného jazyka ani v oddílu Data. - Parameter declarations are not allowed in restricted language mode or a Data section. + Deklarace parametrů nejsou povolené v režimu omezeného jazyka ani v oddílu Data. - Property references are not allowed in restricted language mode or a Data section. + Odkazy na vlastnosti nejsou povolené v režimu omezeného jazyka ani v oddílu Data. - Script block literals are not allowed in restricted language mode or a Data section. + Literály bloků skriptů nejsou povolené v režimu omezeného jazyka ani v oddílu Data. - The switch statement is not allowed in restricted language mode or a Data section. + Příkaz switch není povolený v režimu omezeného jazyka ani v oddílu Data. - A variable that cannot be referenced in restricted language mode or a Data section is being referenced. Variables that can be referenced include the following: {0}. + Odkazuje se na proměnnou, na kterou v režimu omezeného jazyka ani v oddílu Data odkazovat nejde. Mezi proměnné, na které lze odkazovat, patří: {0}. - The command '{0}' is not allowed in restricted language mode or a Data section. + Příkaz {0} není povolený v režimu omezeného jazyka ani v oddílu Data. - The data statement is not allowed in restricted language mode or another Data section. + Příkaz Data není povolený v režimu omezeného jazyka ani v jiném oddílu Data. - The SupportedCommand parameter of the Data section is missing a value. Supply a cmdlet or function name to the parameter. + Parametru SupportedCommand oddílu Data chybí hodnota. Zadejte parametru název rutiny nebo funkce. - A Begin statement block, Process statement block, or parameter statement is not allowed in a Data section. + Blok příkazů Begin, blok příkazů Process ani příkaz parametru nejsou v oddílu Data povolené. - String multiplication results with more than "{0}" characters are not allowed in restricted language mode or a Data section. + Výsledky násobení řetězců s více než {0} znaky nejsou povolené v režimu omezeného jazyka ani v oddílu Data. - Array multiplication resulting in more than {0} elements is not allowed in restricted language mode or a Data section. + Násobení pole s výsledkem obsahujícím více než {0} prvků není povolené v režimu omezeného jazyka ani v oddílu Data. - Dot sourcing is not allowed in restricted language mode or a Data section. + Dot sourcing není povolený v režimu omezeného jazyka ani v oddílu Data. - Attribute argument must be a constant or a script block. + Argument atributu musí být konstanta nebo blok skriptu. - Cannot find the type for custom attribute '{0}'. Make sure that the assembly that contains this type is loaded. + Typ pro vlastní atribut {0} nejde najít. Ujistěte se, že je načtené sestavení, které tento typ obsahuje. - Property '{0}' cannot be found for type '{1}'. + Vlastnost {0} nejde najít pro typ {1}. - Unexpected attribute '{0}'. + Neočekávaný atribut {0}. - Missing ] at end of attribute or type literal. + Na konci atributu nebo literálu typu chybí ]. - The function or command was called as if it were a method. Parameters should be separated by spaces. For information about parameters, see the about_Parameters Help topic. + Funkce nebo příkaz byly volané, jako by šlo o metodu. Parametry by měly být oddělené mezerami. Informace o parametrech najdete v tématu nápovědy about_Parameters. - The Try statement is missing its statement block. + Příkazu Try chybí blok příkazů. - The Try statement is missing its Catch or Finally block. + Příkazu Try chybí blok Catch nebo Finally. - The Catch block is missing its statement block. + Bloku Catch chybí blok příkazů. - The Finally block is missing its statement block. + Bloku Finally chybí blok příkazů. - Exception type {0} is already handled by a previous handler. + Typ výjimky {0} už zpracovává předchozí obslužná rutina. - Catch block must be the last catch block. + Blok Catch musí být poslední blok catch. - Missing type literal. + Chybí literál typu. - The terminator '#>' is missing from the multiline comment. + Ve víceřádkovém komentáři chybí ukončovací #>. - No characters are allowed after a here-string header but before the end of the line. + Za hlavičkou here-string nejsou před koncem řádku povolené žádné znaky. - Parser errors were detected. + Byly zjištěny chyby parseru. - Missing statement block after '{0}'. + Za {0} chybí blok příkazů. - Unexpected type [{0}] was found in the parameter statement. + V příkazu parametru byl nalezen neočekávaný typ [{0}]. - Unexpected type [{0}] was found before statement. + Před příkazem byl nalezen neočekávaný typ [{0}]. - A null key is not allowed in a hash literal. + Klíč null není v literálu hashovací tabulky povolený. - Attributes are not allowed in restricted language mode or a Data section. + Atributy nejsou povolené v režimu omezeného jazyka ani v oddílu Data. - The type {0} is not allowed in restricted language mode or a Data section. + Typ {0} není povolený v režimu omezeného jazyka ani v oddílu Data. - '{0}' is a ReadOnly property. + {0} je vlastnost jen pro čtení. - The type name is missing the assembly name specification. + V názvu typu chybí specifikace názvu sestavení. - Flow of control cannot leave a Finally block. + Tok řízení nemůže opustit blok Finally. - Unrecoverable error in PowerShell. + Neopravitelná chyba v PowerShellu. - An AST cannot be used as the child of more than one AST. To use this AST in another AST, call the Copy() method and use its result. + AST nejde použít jako podřízený prvek více než jednoho AST. Pokud chcete tento AST použít v jiném AST, zavolejte metodu Copy() a použijte její výsledek. - Expression is not allowed in a Using expression. + V příkazu Using není povolený výraz. - A Using variable cannot be retrieved. A Using variable can be used only with Invoke-Command, Start-Job, or InlineScript in the script workflow. When it is used with Invoke-Command, the Using variable is valid only if the script block is invoked on a remote computer. + Proměnnou Using nejde načíst. Proměnnou Using je možné v pracovním postupu skriptu použít jen s Invoke-Command, Start-Job nebo InlineScript. Při použití s Invoke-Command je proměnná Using platná jen tehdy, pokud se blok skriptu vyvolá na vzdáleném počítači. - Variable reference is not valid. The variable name is missing. + Odkaz na proměnnou není platný. Chybí název proměnné. - Variable reference is not valid. ':' was not followed by a valid variable name character. Consider using ${} to delimit the name. + Odkaz na proměnnou není platný. Za : nenásledoval platný znak názvu proměnné. Zvažte použití ${} k oddělení názvu. - Not all parse errors were reported. Correct the reported errors and try again. + Nebyly nahlášené všechny chyby parsování. Opravte nahlášené chyby a zkuste to znovu. - Missing type name after '['. + Za [ chybí název typu. - * stream + * datový proud - debug stream + ladicí datový proud - error stream + chybový datový proud - output stream + výstupní datový proud - The {0} for this command is already redirected. + {0} pro tento příkaz už je přesměrovaný. - verbose stream + podrobný datový proud - warning stream + datový proud upozornění - Missing statement body after keyword '{0}'. + Za klíčovým slovem {0} chybí tělo příkazu. - Parallel and sequence blocks are not allowed in restricted language mode or a Data section. + Bloky Parallel a Sequence nejsou povolené v režimu omezeného jazyka ani v oddílu Data. - Unexpected keyword '{0}'. + Neočekávané klíčové slovo {0}. - [void] cannot be used as a parameter type, or on the left side of an assignment. + [void] nejde použít jako typ parametru ani na levé straně přiřazení. - The method cannot be invoked. + Tuto metodu nelze vyvolat. - Cannot convert hashtable to an object of the following type: {0}. Hashtable-to-Object conversion is not supported in restricted language mode or a Data section. + Hashovací tabulku nejde převést na objekt následujícího typu: {0}. Převod hashovací tabulky na objekt není podporovaný v režimu omezeného jazyka ani v oddílu Data. - Argument must be constant. + Argument musí být konstanta. - The argument for the {0} parameter is not valid. Specify a valid string argument. + Argument parametru {0} není platný. Zadejte platný řetězcový argument. - The argument for the Module parameter is not valid. {0} + Argument parametru Module není platný. {0} - The argument for the Version parameter is not valid. Specify a valid PowerShell version, in the format major.minor version. + Argument parametru Version není platný. Zadejte platnou verzi PowerShellu ve formátu hlavní.verze. - The argument for the {0} parameter is not valid. Specify a valid PowerShell edition. + Argument parametru {0} není platný. Zadejte platnou edici PowerShellu. - The argument for the {0} parameter contains duplicate values. Do not specify duplicate PowerShell edition values. + Argument parametru {0} obsahuje duplicitní hodnoty. Nezadávejte duplicitní hodnoty edice PowerShellu. - Wildcard characters are not supported for module names. + Zástupné znaky nejsou v názvech modulů podporované. - Cannot invoke method. Method invocation is supported only on core types in this language mode. + Metodu nejde vyvolat. Vyvolání metody je v tomto jazykovém režimu podporované jen u základních typů. - Cannot set property. Property setting is supported only on core types in this language mode. + Vlastnost nejde nastavit. Nastavení vlastnosti je v tomto jazykovém režimu podporované jen u základních typů. - An attribute name for resource '{0}' was found that is not valid. An attribute name must be a simple string, and cannot contain variables or expressions. Replace '{1}' with a simple string. + Pro prostředek {0} byl nalezen neplatný název atributu. Název atributu musí být jednoduchý řetězec a nesmí obsahovat proměnné ani výrazy. Nahraďte {1} jednoduchým řetězcem. - The member '{0}' is not valid. Valid members are -'{1}'. + Člen {0} není platný. Platné členy jsou +{1}. - Missing '{' in object definition. + V definici objektu chybí {. - A required name or expression was missing. + Chyběl požadovaný název nebo výraz. - The schema file {0} was not found. Verify that any modules specified in a configuration statement contain a schema.mof file, and then try running the script again. + Soubor schématu {0} se nenašel. Ověřte, že všechny moduly zadané v příkazu konfigurace obsahují soubor schema.mof, a potom zkuste skript spustit znovu. - Cannot define data section. Definition of additional supported commands is not supported in this language mode. + Oddíl Data nejde definovat. Definování dalších podporovaných příkazů není v tomto jazykovém režimu podporované. - Missing '{' in configuration statement. + V příkazu konfigurace chybí {. - Exception parsing MOF file '{0}':{1}. + Výjimka při parsování souboru MOF {0}:{1}. - The name for the configuration is missing. Provide the missing name as a simple name, string, or string-valued expression. + Chybí název konfigurace. Zadejte chybějící název jako jednoduchý název, řetězec nebo výraz s řetězcovou hodnotou. - Could not find the module '{0}'. + Modul {0} se nepodařilo najít. Multiple versions of the module '{0}' were found. You can run 'Get-Module -ListAvailable -FullyQualifiedName {0}' to see available versions on the system, and then use the fully qualified name '@{{ModuleName="{0}"; RequiredVersion="Version"}}'. - The ThrottleLimit parameter of the foreach statement is missing a value. Supply a throttle limit to the parameter. + Parametru ThrottleLimit příkazu foreach chybí hodnota. Zadejte parametru limit omezení. 'ThrottleLimit' must not be localized. - The ThrottleLimit parameter is only supported on foreach statements that use the Parallel parameter. + Parametr ThrottleLimit je podporovaný jen u příkazů foreach, které používají parametr Parallel. 'ThrottleLimit' and 'Parallel' must not be localized. - The configuration block results were null or empty. Verify that configurations were defined in the block. + Výsledky bloku konfigurace byly null nebo prázdné. Ověřte, že byly v bloku definované konfigurace. - The '{0}' resource can only be used once per configuration, and therefore cannot have a name. Remove '{1}', and then run the script again. + Prostředek {0} je možné v každé konfiguraci použít jen jednou, a proto nemůže mít název. Odeberte {1} a potom skript spusťte znovu. - There is an incomplete property assignment block in the instance definition. + Definice instance obsahuje neúplný blok přiřazení vlastnosti. - Missing '=' operator after key in property assignment. + Za klíčem v přiřazení vlastnosti chybí operátor =. - Duplicate property assignments are not allowed in an instance definition. + Duplicitní přiřazení vlastností nejsou v definici instance povolená. - A second CIM class definition for '{0}' was found while processing the schema file '{1}'. This class was already defined in the file(s) '{2}'. Remove the redundant definition, and then try again. + Druhá definice třídy CIM pro {0} byla nalezena při zpracování souboru schématu {1}. Tato třída už byla definovaná v souborech {2}. Odeberte redundantní definici a zkuste to znovu. - Resource name '{0}' is already being used by another Resource or Configuration. + Název prostředku {0} už používá jiný prostředek nebo konfigurace. - The class name '{0}' does not match '{1}', the name of the file in which it is defined. Rename either the file name to match the class name or vice versa + Název třídy {0} neodpovídá názvu souboru {1}, ve kterém je definovaná. Přejmenujte soubor tak, aby jeho název odpovídal názvu třídy, nebo naopak - A duplicate resource identifier '{0}' was found while processing the specification for node '{1}'. Change the name of this resource so that it is unique within the node specification. + Byl nalezen duplicitní identifikátor prostředku {0} při zpracování specifikace uzlu {1}. Změňte název tohoto prostředku tak, aby byl v rámci specifikace uzlu jedinečný. - There is no whitespace between the name and the scriptblock in dynamic keyword '{0}' body statement. + V těle příkazu dynamického klíčového slova {0} není mezi názvem a blokem skriptu mezera. - The key property for an entry in the dictionary of functions to define cannot be empty because the key property is used as the function name. Specify a non-empty string as the value of the key property, and then try the operation again. + Vlastnost klíče pro položku ve slovníku funkcí k definování nemůže být prázdná, protože se používá jako název funkce. Jako hodnotu vlastnosti klíče zadejte neprázdný řetězec a potom zkuste operaci znovu. - The format of the resource reference '{0}' in the Requires list for resource '{1}' is not valid. A required resource name should be in the format '[<typename>]<name>', with alphanumeric characters, spaces, '_', '-', '.' and '\'. + Formát odkazu na prostředek {0} v seznamu Requires pro prostředek {1} není platný. Název požadovaného prostředku musí mít formát [<typename>]<name> a může obsahovat alfanumerické znaky, mezery, _, -, . a \. The capitalized word Requires should not be localized. The words <typename> and <name> should be localized but the <> characters must be preserved. - The format of the resource reference '{0}' in the exclusive list for resource '{1}' is not valid. An exclusive resource name should be in the format '<typename>\<name>', with no spaces. + Formát odkazu na prostředek {0} v exkluzivním seznamu pro prostředek {1} není platný. Název exkluzivního prostředku musí mít formát <typename>\<name> bez mezer. - The PartialConfiguration '{0}' is set to pull mode which requires a ConfigurationSource property. + PartialConfiguration {0} je nastavená na režim pull, který vyžaduje vlastnost ConfigurationSource. - A null entry was found in the list of variable entries to create in the script block scope. Remove the entry at index {0}, or replace it with a non-null entry, and then try again. + V seznamu položek proměnných, které se mají vytvořit v oboru bloku skriptu, byla nalezena položka null. Odeberte položku na indexu {0} nebo ji nahraďte položkou s jinou hodnotou než null a zkuste to znovu. - The script block that defines function '{0}' cannot be null or empty. Provide a non-empty script block in the function definition dictionary, and then try the operation again. + Blok skriptu definující funkci {0} nesmí být null ani prázdný. Ve slovníku definic funkcí zadejte neprázdný blok skriptu a potom zkuste operaci znovu. - The syntax of the Import-DscResource dynamic keyword is: + Syntaxe dynamického klíčového slova Import-DscResource je: Import-DscResource [-Name <ResourceName(s)>] [-ModuleName <ModuleName(s)>] [-ModuleVersion <ModuleVersion>]. -Name : Names of one or more resources to import. -ModuleName : Module names or ModuleSpecification objects of one or more modules to import. -ModuleVersion : Version of module to import. If used, ModuleName must represent only one module by name. +Name : Názvy jednoho nebo více prostředků k importu. +ModuleName : Názvy modulů nebo objekty ModuleSpecification jednoho nebo více modulů k importu. +ModuleVersion : Verze modulu k importu. Pokud se použije, ModuleName musí podle názvu představovat jen jeden modul. - Import-DscResource dynamic keyword supports only one module when Name parameter is specified. + Dynamické klíčové slovo Import-DscResource podporuje při zadaném parametru Name jen jeden modul. - Positional parameters are not supported for the Import-DscResource dynamic keyword. The syntax of Import-DscResource dynamic keyword is: "Import-DscResource [-Name <ResourceName(s)>] [-ModuleName <ModuleName(s)>] [-ModuleVersion <ModuleVersion>] + Dynamické klíčové slovo Import-DscResource nepodporuje poziční parametry. Syntaxe dynamického klíčového slova Import-DscResource je: Import-DscResource [-Name <ResourceName(s)>] [-ModuleName <ModuleName(s)>] [-ModuleVersion <ModuleVersion>] - Unable to load resource '{0}': Resource not found. + Prostředek {0} se nepodařilo načíst: Prostředek se nenašel. - Configuration keyword is not allowed in constrainedLanguage mode. + Klíčové slovo Configuration není v režimu constrainedLanguage povolené. - The configuration name '{0}' is not valid. Standard names may only contain letters (a-z, A-Z), numbers (0-9), period (.), hyphen (-) and underscore (_). The name may not be null or empty, and should start with a letter. + Název konfigurace {0} není platný. Standardní názvy můžou obsahovat jen písmena (a-z, A-Z), číslice (0-9), tečku (.), spojovník (-) a podtržítko (_). Název nesmí být null ani prázdný a měl by začínat písmenem. - Configuration only supports the End block in its body. Begin, Process and DynamicParam blocks are not allowed in a configuration. + Konfigurace podporuje v těle jen blok End. Bloky Begin, Process a DynamicParam nejsou v konfiguraci povolené. - Cim deserializer threw an error when deserializing file {0}. + Deserializátor CIM vyvolal při deserializaci souboru {0} chybu. - '{0}' is not a valid value for property '{1}' on class '{2}'. Please change the value to one of the following strings: {3}. + {0} není platná hodnota vlastnosti {1} ve třídě {2}. Změňte hodnotu na jeden z následujících řetězců: {3}. - At least one of the values '{0}' is not supported or valid for property '{1}' on class '{2}'. Please specify only supported values: + Alespoň jedna z hodnot {0} není pro vlastnost {1} ve třídě {2} podporovaná nebo platná. Zadejte jen podporované hodnoty: {3}. - Resource '{0}' requires that a value of type '{1}' be provided for property '{2}'. + Prostředek {0} vyžaduje, aby byla zadaná hodnota typu {1} pro vlastnost {2}. - Property '{0}' of Resource '{1}' has value '{2}' which is not between valid range '{3}' and '{4}'. + Vlastnost {0} prostředku {1} má hodnotu {2}, která není v platném rozsahu {3} až {4}. - Failed to load the PowerShell data file '{0}' with the following error: + Datový soubor PowerShellu {0} se nepodařilo načíst. Došlo k této chybě: {1} - Cannot resolve the path '{0}' to a single .psd1 file. + Cestu {0} nejde přeložit na jediný soubor .psd1. - The PowerShell data file '{0}' is invalid since it cannot be evaluated into a Hashtable object. + Datový soubor PowerShellu {0} není platný, protože ho nejde vyhodnotit jako objekt Hashtable. - Configuration is not supported on WinPE. + Konfigurace není ve WinPE podporovaná. - If the expression passed to the Where() operator is null then you must specify a non-Default value for the selection mode argument. Please change the value of the mode argument to a value other than Default and try running your script again. + Pokud je výraz předaný operátoru Where() null, musíte pro argument režimu výběru zadat jinou hodnotu než Default. Změňte hodnotu argumentu mode na jinou hodnotu než Default a zkuste skript spustit znovu. - The generic collection type [{0}] passed to ForEach() has too many type arguments. Please change the specified type to be a generic collection with only one type argument then try running your script again. + Obecný typ kolekce [{0}] předaný metodě ForEach() má příliš mnoho argumentů typu. Změňte zadaný typ na obecnou kolekci s jediným argumentem typu a potom zkuste skript spustit znovu. - Unable to convert input to the target type [{0}] passed to the ForEach() operator. Please check the specified type and try running your script again. + Vstup nejde převést na cílový typ [{0}] předaný operátoru ForEach(). Zkontrolujte zadaný typ a zkuste skript spustit znovu. - Script block with a 'clean' block is not supported by the 'ForEach' method. + Metoda ForEach nepodporuje blok skriptu s blokem clean. - The 'numberToReturn' value provided to the third argument of the Where() operator must be greater than zero. Please correct the argument's value and try running your script again. + Hodnota numberToReturn zadaná jako třetí argument operátoru Where() musí být větší než nula. Opravte hodnotu argumentu a zkuste skript spustit znovu. - Redirection only allows another stream to be merged with the output stream. Please correct the redirection operation to merge into the output stream then try running your script again. + Přesměrování umožňuje sloučit s výstupním datovým proudem jen jiný datový proud. Opravte operaci přesměrování tak, aby se sloučila do výstupního datového proudu, a potom zkuste skript spustit znovu. - The ForEach() operator could not find a member '{0}' on the target object. Please verify that the named member exists and then try running your script again. + Operátor ForEach() nenašel v cílovém objektu člen {0}. Ověřte, že pojmenovaný člen existuje, a potom zkuste skript spustit znovu. - The '{0}' keyword is not supported in this version of the language. + Klíčové slovo {0} není v této verzi jazyka podporované. - The '{0}' property is not supported in this version of the language. + Vlastnost {0} není v této verzi jazyka podporovaná. - Duplicate '{0}' qualifier + Duplicitní kvalifikátor {0} - Modifier '{0}' cannot be combined with '{1}' + Modifikátor {0} nelze kombinovat s {1} - Missing using directive + Chybí direktiva using - Missing namespace alias + Chybí alias oboru názvů - Missing '=' operator + Chybí operátor = - Missing using name + Chybí název using - Variable is not assigned in the method. + Proměnná není v metodě přiřazená. - Missing a property name or method definition. + Chybí název vlastnosti nebo definice metody. - The member '{0}' is already defined. + Člen {0} už je definovaný. - Only one type may be specified on class members. + U členů třídy je možné zadat jen jeden typ. - Error during creation of type "{0}". Error message: + Při vytváření typu {0} došlo k chybě. Chybová zpráva: {1} - Cannot convert the value to type "{0}". + Hodnotu nejde převést na typ {0}. - Property '{0}' cannot be found for attribute '{1}'. Specify one of the following properties: {2}. + Vlastnost {0} nejde najít pro atribut {1}. Zadejte jednu z následujících vlastností: {2}. - Attribute '{0}' is not valid on this declaration. It is valid on '{1}' declarations only. + Atribut {0} není v této deklaraci platný. Je platný jen v deklaracích {1}. - Attribute argument must be a constant. + Argument atributu musí být konstanta. - Undefined DSC resource '{0}'. Use Import-DSCResource to import the resource. + Nedefinovaný prostředek DSC {0}. K importu prostředku použijte Import-DSCResource. - Exception occurred when pre-parsing dynamic keyword '{0}' with details '{1}'. + Při předběžném parsování dynamického klíčového slova {0} došlo k výjimce s podrobnostmi {1}. - Exception occurred when post-parsing dynamic keyword '{0}' with details '{1}'. + Při následném parsování dynamického klíčového slova {0} došlo k výjimce s podrobnostmi {1}. - Workflow is not supported in PowerShell 6+. + Workflow není v PowerShellu 6+ podporovaný. - Meta Configuration resource {0} is not allowed in the regular configuration. Use meta configuration resources in a configuration with [DscLocalConfigurationManager()] attribute. + Prostředek Meta Configuration {0} není v běžné konfiguraci povolený. Prostředky meta konfigurace používejte v konfiguraci s atributem [DscLocalConfigurationManager()]. - Regular DSC resource {0} is not allowed in the meta configuration. + Běžný prostředek DSC {0} není v meta konfiguraci povolený. - There is no Runspace available to get and run the SteppablePipeline in this thread. You can provide one in the DefaultRunspace property of the System.Management.Automation.Runspaces.Runspace type. The script block you attempted to get SteppablePipeline from was: {0} + V tomto vlákně není k dispozici žádný Runspace pro získání a spuštění SteppablePipeline. Můžete ho zadat ve vlastnosti DefaultRunspace typu System.Management.Automation.Runspaces.Runspace. Blok skriptu, ze kterého jste se pokusili získat SteppablePipeline, byl: {0} - There are valid conversions from {0} to {1}. + Existují platné převody z {0} na {1}. - Cannot perform call. + Volání nelze provést. - Cannot retrieve type information. + Informace o typu nejde načíst. - Could not get dispatch ID for {0} (error: {1}). + Pro {0} se nepodařilo získat identifikátor dispatch (chyba: {1}). - Cannot find an overload for "{0}" and the argument count: "{1}" + Pro {0} a počet argumentů {1} nejde najít přetížení - Error while invoking {0}. Could not find member. + Chyba při vyvolání {0}. Člen se nepodařilo najít. - Error while invoking {0}. Named arguments are not supported. + Chyba při vyvolání {0}. Pojmenované argumenty nejsou podporovány. - Error while invoking {0}. Overflow detected. + Chyba při vyvolání {0}. Bylo zjištěno přetečení. - Error while invoking {0}. A required parameter was omitted. + Chyba při vyvolání {0}. Byl vynechán požadovaný parametr. - Exception setting "{0}": Cannot convert the "{1}" value of type "{2}" to type "{3}". + Výjimka při nastavení {0}: Hodnotu {1} typu {2} nejde převést na typ {3}. - IDispatch::GetIDsOfNames behaved unexpectedly for {0}. + IDispatch::GetIDsOfNames se pro {0} zachovalo neočekávaně. - Marshal.SetComObjectData failed. + Metoda Marshal.SetComObjectData se nezdařila. - Unexpected VarEnum {0}. + Neočekávaná hodnota VarEnum {0}. - Attempting to pass an event handler of an unsupported type. + Byl proveden pokus o předání nepodporovaného typu obslužné rutiny události. - Configuration keyword is not supported in PowerShell 6+. + Klíčové slovo Configuration není v PowerShellu 6+ podporované. - Not all code path returns value within method. + Ne všechny cesty kódu v metodě vracejí hodnotu. - Invalid return statement within void method. + Neplatný příkaz return v metodě vracející void. - Invalid return statement within non-void method. + Neplatný příkaz return v metodě, která nevrací void. - Missing '{0}' body in '{0}' declaration. + Chybí tělo {0} v deklaraci {0}. - Cannot define enum because of a cycle in the initialization expressions. + Výčet nejde definovat kvůli cyklu v inicializačních výrazech. - Enumerator value is either too large or too small for {0}. + Hodnota enumerátoru je pro {0} příliš velká nebo příliš malá. - Enumerator value must be a constant value. + Hodnota enumerátoru musí být konstantní. - Exception occurred when performing semantic check for dynamic keyword '{0}' with details '{1}'. + Při sémantické kontrole dynamického klíčového slova {0} došlo k výjimce s podrobnostmi {1}. - The '{0}' property with type '{1}' of DSC resource class '{2}' is not supported. + Vlastnost {0} typu {1} třídy prostředku DSC {2} není podporovaná. - Missing '(' in class method parameter list. + V seznamu parametrů metody třídy chybí (. - A named block is not allowed in a class method. + Pojmenovaný blok není v metodě třídy povolený. - A param block is not allowed in a class method. + Blok param není v metodě třídy povolený. - Cannot inherit from sealed class '{0}'. + Ze zapečetěné třídy {0} nejde dědit. - Type name expected. + Očekával se název typu. - '{0}' is not a valid underlying type for enums. Expected a builtin integral type (one of byte, sbyte, short, ushort, int, uint, long or ulong) + {0} není platný podkladový typ pro výčty. Očekával se předdefinovaný celočíselný typ (byte, sbyte, short, ushort, int, uint, long nebo ulong) - '{0}': Interface name expected. + {0}: Očekával se název rozhraní. - Base class '{0}' does not contain a parameterless constructor. + Základní třída {0} neobsahuje konstruktor bez parametrů. - Invalid base type '{0}'. Base type cannot be an array. + Neplatný základní typ {0}. Základní typ nemůže být pole. - Invalid base type '{0}'. Base type cannot be a generic with unspecified parameters. + Neplatný základní typ {0}. Základní typ nemůže být obecný typ s neurčenými parametry. - Missing 'base' after ':' in a base class constructor call. + Za : ve volání konstruktoru základní třídy chybí base. - A constructor cannot specify a return type. + Konstruktor nemůže určovat návratový typ. - The DSC resource '{0}' has no default constructor. + Prostředek DSC {0} nemá výchozí konstruktor. - The DSC resource '{0}' is missing a Get method that returns [{0}] and accepts no parameters. + Prostředku DSC {0} chybí metoda Get, která vrací [{0}] a nepřijímá žádné parametry. - The DSC resource '{0}' must have at least one key property (using the syntax [DscProperty(Key)].) + Prostředek DSC {0} musí mít aspoň jednu vlastnost klíče (se syntaxí [DscProperty(Key)].) - The DSC resource '{0}' is missing a Set method that returns [void] and accepts no parameters. + Prostředku DSC {0} chybí metoda Set, která vrací [void] a nepřijímá žádné parametry. - The DSC resource '{0}' is missing a Test method that returns [bool] and accepts no parameters. + Prostředku DSC {0} chybí metoda Test, která vrací [bool] a nepřijímá žádné parametry. - A static constructor cannot have any parameters. + Statický konstruktor nemůže mít žádné parametry. - The type '{0}' is not allowed on a property. + Typ {0} není u vlastnosti povolený. - The type '{0}' is not allowed on a parameter. + Typ {0} není u parametru povolený. - Cannot access the non-static member '{0}' in a static method or initializer of a static property. + Ke statickému členu {0} nejde přistupovat ve statické metodě ani inicializátoru statické vlastnosti. - Failed to parse module script file '{0}' with error -'{1}'. + Soubor skriptu modulu {0} se nepodařilo parsovat. Chyba +{1}. - Cannot run a document in PowerShell: {0}. + Dokument nejde spustit v PowerShellu: {0}. - Multiple type constraints are not allowed on a method parameter. + U parametru metody není povoleno více omezení typu. - This script contains malicious content and has been blocked by your antivirus software. + Tento skript obsahuje škodlivý obsah a antivirový software ho zablokoval. - '{0}' cannot be specified in LocalConfigurationManager resource. Please switch to Settings instead or use only following values: {1}. + {0} nelze zadat v prostředku LocalConfigurationManager. Přepněte místo toho na Settings nebo použijte jen následující hodnoty: {1}. - '{0}' is defined in a generic type. + {0} je definované v obecném typu. - Type name '{0}' is ambiguous, it could be '{1}' or '{2}'. + Název typu {0} je nejednoznačný. Může jít o {1} nebo {2}. - A 'using' statement must appear before any other statements in a script. + Příkaz using musí být ve skriptu před všemi ostatními příkazy. - This syntax of the 'using' statement is not supported. + Tato syntaxe příkazu using není podporovaná. - The specified namespace in the 'using' statement contains invalid characters. + Zadaný obor názvů v příkazu using obsahuje neplatné znaky. - information stream + informační datový proud - Invalid key property. The key property must be of [string], signed/unsigned integer, or Enum types. + Neplatná vlastnost klíče. Vlastnost klíče musí být typu [string], celočíselného typu se znaménkem nebo bez znaménka nebo typu Enum. - Invalid Get method. Get method must return [{0}] and accepts no parameters. + Neplatná metoda Get. Metoda Get musí vracet [{0}] a nesmí přijímat žádné parametry. Nejde načíst sestavení {0}. - Cannot use assembly with an UNC path: '{0}'. + Sestavení s cestou UNC {0} nejde použít. - Cannot use assembly with uri schema '{0}'. + Sestavení se schématem URI {0} nejde použít. - Missing a newline or semicolon. + Chybí nový řádek nebo středník. - Cannot assign property, use '{0}{1}'. + Vlastnost nejde přiřadit, použijte {0}{1}. - '{0}' is not a valid value for using name. + {0} není platná hodnota názvu using. - Cannot assign property, use '{0}{1}'. + Vlastnost nejde přiřadit, použijte {0}{1}. - DebugMode should only have one value. + DebugMode by měla mít jen jednu hodnotu. - Label '{0}' not found inside the method. + Popisek {0} se uvnitř metody nenašel. - Failed to convert the value of CimProperty {0} to the property value of class {1}. + Hodnotu CimProperty {0} se nepodařilo převést na hodnotu vlastnosti třídy {1}. - Property {0} of PowerShell class {1} is not declared as array type, but defined in its configuration instance as instance array type. + Vlastnost {0} třídy PowerShellu {1} není deklarovaná jako typ pole, ale v instanci konfigurace je definovaná jako typ pole instancí. - Failed to create an object of PowerShell class {0}. + Objekt třídy PowerShellu {0} se nepodařilo vytvořit. - The hashtable supplied to the Desired State Configuration resource {0} is not valid. The key or value cannot be null or empty. + Hashovací tabulka zadaná prostředku Desired State Configuration {0} není platná. Klíč ani hodnota nesmí být null nebo prázdné. - The username supplied to the Desired State Configuration resource {0} is not valid. The username cannot be null or empty. + Uživatelské jméno zadané prostředku Desired State Configuration {0} není platné. Uživatelské jméno nesmí být null ani prázdné. - The username supplied to the Desired State Configuration resource {0} is not valid. The username cannot be null or empty. + Uživatelské jméno zadané prostředku Desired State Configuration {0} není platné. Uživatelské jméno nesmí být null ani prázdné. - Property {0} is not declared in PowerShell class {1}, but defined in its configuration instance. + Vlastnost {0} není deklarovaná v třídě PowerShellu {1}, ale je definovaná v její instanci konfigurace. - PartialConfiguration '{0}' has a Refresh Mode set to Disabled which is not a valid mode for Partial Configurations. Use Pull or Push refresh mode. + PartialConfiguration {0} má režim aktualizace nastavený na Disabled, což není platný režim pro částečné konfigurace. Použijte režim aktualizace Pull nebo Push. - Cannot create type. Only core types are supported in this language mode. + Typ nelze vytvořit. V tomto jazykovém režimu se podporují jen základní typy. - Import-DscResource cannot be specified inside of Node context + Import-DscResource nejde zadat uvnitř kontextu Node $PSCulture, $PSUICulture, $true, $false, $null - Cannot assign automatic variable '{0}' with type '{1}' + Automatickou proměnnou {0} typu {1} nejde přiřadit - Conflict in using PsDscRunAsCredential for Resource {0} because it already specifies PsDscRunAsCredential value. We can only use one PsDscRunAsCredential for the composite resource. + Při použití PsDscRunAsCredential pro prostředek {0} došlo ke konfliktu, protože už určuje hodnotu PsDscRunAsCredential. Pro složený prostředek můžeme použít jen jednu hodnotu PsDscRunAsCredential. - Unable to find DSC schema store at "{0}". Please ensure PSDesiredStateConfiguration v3 module is installed. + Úložiště schémat DSC v umístění {0} nejde najít. Ujistěte se, že je nainstalovaný modul PSDesiredStateConfiguration v3. {0} - This script contains content that has been flagged as suspicious through a policy setting and has been blocked with error code {0}. Contact your administrator for more information. + Tento skript obsahuje obsah označený nastavením zásad jako podezřelý a byl zablokovaný s kódem chyby {0}. Další informace vám poskytne správce. - Cannot use '&' or '.' operators to invoke a module scope command across language boundaries. + Operátory & ani . nejdou použít k vyvolání příkazu v oboru modulu napříč hranicemi jazyků. - Class keyword is not allowed in ConstrainedLanguage mode. + Klíčové slovo Class není v režimu ConstrainedLanguage povolené. - Missing ':' in the ternary expression. + V ternárním výrazu chybí :. - A pipeline chain operator must be followed by a pipeline. + Za operátorem řetězce kanálu musí následovat kanál. - Background operators can only be used at the end of a pipeline chain. + Operátory na pozadí je možné použít jen na konci řetězce kanálu. - Directly invoking the 'clean' block of a script block is not supported. + Přímé vyvolání bloku clean v bloku skriptu není podporované. - Parser Configuration Keyword + Klíčové slovo Configuration parseru - The Configuration keyword will not be allowed in Constrained Language mode for untrusted script. + Klíčové slovo Configuration nebude v režimu Constrained Language u nedůvěryhodného skriptu povolené. - Parser Class Keyword + Klíčové slovo Class parseru - The Class keyword will not be allowed in Constrained Language mode for untrusted script. + Klíčové slovo Class nebude v režimu Constrained Language u nedůvěryhodného skriptu povolené. - Parser Data Section SupportedCommand + SupportedCommand oddílu Data parseru - The Data Section that includes the SupportedCommand parameter would be disallowed in Constrained Language mode for untrusted script. + Oddíl Data, který obsahuje parametr SupportedCommand, nebude v režimu Constrained Language u nedůvěryhodného skriptu povolený. - Module Scope Call Operator + Operátor volání oboru modulu - The module scope call operator will be denied in Constrained Language mode. + Operátor volání oboru modulu bude v režimu Constrained Language zamítnutý. - ForEach Keyword Method Invocation + Vyvolání metody klíčového slova ForEach - The ForEach keyword will fail '{0}' iteration item method invocation when run in Constrained Language mode. + Klíčové slovo ForEach při spuštění v režimu Constrained Language selže při vyvolání metody položky iterace {0}. - Expression Evaluation May Fail + Vyhodnocení výrazu může selhat - Creating a steppable pipeline from a script block may require evaluating some expressions within the script block. The expression evaluation will silently fail and return 'null' in Constrained Language mode, unless the expression represents a constant value. + Vytvoření postupně spustitelného kanálu z bloku skriptu může vyžadovat vyhodnocení některých výrazů v bloku skriptu. Vyhodnocení výrazu v tichém režimu selže a vrátí hodnotu null v režimu omezeného jazyka, pokud výraz nepředstavuje konstantní hodnotu. - Configuration keyword is not supported on ARM64 processors. + Klíčové slovo Configuration není na procesorech ARM64 podporované. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/de/HelpDisplayStrings.de.resx b/src/System.Management.Automation/resources/de/HelpDisplayStrings.de.resx index 570244f98ea..e0ecdd83522 100644 --- a/src/System.Management.Automation/resources/de/HelpDisplayStrings.de.resx +++ b/src/System.Management.Automation/resources/de/HelpDisplayStrings.de.resx @@ -121,133 +121,133 @@ NAME - SYNOPSIS + ZUSAMMENFASSUNG - DESCRIPTION + BESCHREIBUNG SYNTAX - PARAMETERS + PARAMETER - INPUTS + EINGABEN - OUTPUTS + AUSGABEN - TERMINATING ERRORS + FEHLER MIT ABBRUCH - NON-TERMINATING ERRORS + FEHLER OHNE ABBRUCH - NOTES + HINWEISE - EXAMPLES + BEISPIELE Beispiel - EXAMPLE + BEISPIEL - OUTPUT + AUSGABE - RELATED LINKS + VERWANDTE LINKS - SHORT DESCRIPTION + KURZE BESCHREIBUNG - Title: + Titel: - Question: + Frage: Antwort - Term: + Laufzeit: Definition: - Content: + Inhalt: - PROVIDER NAME + ANBIETERNAME - This cmdlet supports the common parameters: Verbose, Debug, + Dieses Cmdlet unterstützt folgende allgemeine Parameter: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, WarningVariable, - OutBuffer, PipelineVariable, and OutVariable. For more information, see + OutBuffer, PipelineVariable und OutVariable. Weitere Informationen finden Sie unter about_CommonParameters (https://go.microsoft.com/fwlink/?LinkID=113216). - Required? + Erforderlich? Position? - Type: + Typ: - Target Object Type: + Zielobjekttyp: - Default value + Standardwert - Accept pipeline input? + Pipelineeingabe akzeptieren? - Accept wildcard characters? + Platzhalterzeichen akzeptieren? - (Category: + (Kategorie: - Suggested Action: + Vorgeschlagene Aktion: - For more information, type: + Geben Sie folgenden Befehl ein, um weitere Informationen zu erhalten: - For technical information, type: + Geben Sie Folgendes ein, um technische Daten anzuzeigen: - To see the examples, type: + Geben Sie Folgendes ein, um die Beispiele anzuzeigen: - For online help, type: + Geben Sie Folgendes ein, um die Onlinehilfe anzuzeigen: <CommonParameters> - REMARKS + ANMERKUNGEN - true + wahr - Named + Benannt - DRIVES + LAUFWERKE - CAPABILITIES + FUNKTIONEN TASKS @@ -256,37 +256,37 @@ TASK: - FILTERS + FILTER - DYNAMIC PARAMETERS + DYNAMISCHE PARAMETER - Cmdlets Supported: + Unterstützte Cmdlets: - ALIASES + ALIASE - Get-Help cannot find the Help files for this cmdlet on this computer. It is displaying only partial help. - -- To download and install Help files for the module that includes this cmdlet, use Update-Help. - -- To view the Help topic for this cmdlet online, type: "Get-Help {0} -Online" or - go to {1}. + Get-Help kann die Hilfedateien für dieses Cmdlet auf diesem Computer nicht finden. Es wird nur eine unvollständige Hilfe angezeigt. + – Um die Hilfedateien für das Modul herunterzuladen und zu installieren, das dieses Cmdlet enthält, verwenden Sie Update-Help. + – Um das Hilfethema für dieses Cmdlet online anzuzeigen, geben Sie Folgendes ein: „Get-Help {0} -Online“ oder + wechseln Sie zu „{1}“. Keine - Aliases + Aliase - Dynamic? + Dynamisch? - Parameter set name + Parametersatzname - Unable to retrieve the HelpInfo XML file for UI culture {0}. Make sure the HelpInfoUri property in the module manifest is valid or check your network connection and then try the command again. + Die XML-Datei „HelpInfo“ für die Benutzeroberflächenkultur „{0}“ konnte nicht abgerufen werden. Stellen Sie sicher, dass die HelpInfoUri-Eigenschaft im Modulmanifest gültig ist, oder überprüfen Sie Ihre Netzwerkverbindung, und versuchen Sie den Befehl dann erneut. ByPropertyName @@ -298,176 +298,176 @@ FromRemainingArguments - The specified culture is not supported: {0}. Specify a culture from the following list: {{{1}}}. + Die angegebene Kultur wird nicht unterstützt: {0}. Geben Sie eine Kultur aus der folgenden Liste an: {{{1}}}. - Postponing error and trying fallback cultures, will show as error if none of fallbacks are supported: + Das Verschieben des Fehlers und der Versuch mit Fallbackkulturen wird als Fehler angezeigt, wenn keine der Fallbacks unterstützt wird: {0} - The ModuleBase directory cannot be found. Verify the directory and try again. + Das ModuleBase-Verzeichnis wurde nicht gefunden. Überprüfen Sie das Verzeichnis, und versuchen Sie es erneut. - The path {0} is not a valid directory. Make sure the directory exists and retry. + Der Pfad „{0}“ ist kein gültiges Verzeichnis. Stellen Sie sicher, dass das Verzeichnis vorhanden ist, und versuchen Sie es erneut. - A Help URI cannot contain more than 10 redirections. Specify a valid Help URI. + Ein Hilfe-URI darf nicht mehr als 10 Umleitungen enthalten. Geben Sie einen gültigen Hilfe-URI an. - Updating Help + Aktualisieren der Hilfe - Connecting to Help Content... + Verbindung mit Hilfeinhalt wird hergestellt... - Downloading Help Content... + Hilfeinhalt wird heruntergeladen... - Installing Help content... + Hilfeinhalt wird installiert... - Locating Help Content... + Hilfeinhalt wird gesucht... - (All) + (Alle) - No PowerShell modules were found that match the following pattern: {0}. Verify the pattern and then try the command again. + Es wurden keine PowerShell-Module gefunden, die dem folgenden Muster entsprechen: {0}. Bestätigen Sie das Muster, und wiederholen Sie dann den Befehl. - No PowerShell modules were found that match the specified FullyQualifiedModule {0}. Verify the FullyQualifiedModule value and then try the command again. + Es wurden keine PowerShell-Module gefunden, die mit dem angegebenen FullyQualifiedModule „{0}“ übereinstimmen. Überprüfen Sie den FullyQualifiedModule-Wert, und versuchen Sie den Befehl dann erneut. - Help content cannot be found. Make sure the server is available and the help content location is properly defined in the HelpInfo XML. + Der Hilfeinhalt wurde nicht gefunden. Stellen Sie sicher, dass der Server verfügbar ist und der Speicherort des Hilfeinhalts in der HelpInfo-XML korrekt definiert ist. - The Update-Help command failed because the specified module does not support updatable help. Use Get-Help -Online or look online for help for the commands in this module. + Der Befehl „Update-Help“ ist fehlgeschlagen, weil das angegebene Modul aktualisierbare Hilfe nicht unterstützt. Verwenden Sie „Get-Help -Online“, oder suchen Sie online nach Hilfe zu den Befehlen in diesem Modul. - The following parameter must not be null or empty: Module. + Der folgende Parameter darf nicht NULL oder leer sein: Module. - The following parameter must not be null or empty: Path. + Der folgende Parameter darf nicht NULL oder leer sein: Pfad - Update-Help has completed successfully. + Update-Help wurde erfolgreich abgeschlossen. - Error extracting Help content. + Fehler beim Extrahieren des Hilfeinhalts. - Unable to connect to Help content. The server on which Help content is stored might not be available. Verify that the server is available, or wait until the server is back online, and then try the command again. + Es kann keine Verbindung mit dem Hilfeinhalt hergestellt werden. Der Server, auf dem der Hilfeinhalt gespeichert ist, ist möglicherweise nicht verfügbar. Überprüfen Sie, ob der Server verfügbar ist, oder warten Sie, bis der Server wieder online ist, und versuchen Sie den Befehl dann erneut. - The Help content at the specified location is not valid. Specify a location that contains valid Help Content. + Der Hilfeinhalt am angegebenen Speicherort ist ungültig. Geben Sie einen Speicherort an, der gültigen Hilfeinhalt enthält. - The HelpInfo XML is not valid. Specify valid HelpInfo XML. + Die HelpInfo-XML ist ungültig. Geben Sie gültige HelpInfo-XML an. - Help content was successfully saved to the following location: {0} + Der Hilfeinhalt wurde erfolgreich am folgenden Speicherort gespeichert: {0} - The Help content XSD file cannot be found in {0}. Verify that the XSD file exists at the specified location, and then retry the command. + Die XSD-Datei für den Hilfeinhalt wurde in „{0}“ nicht gefunden. Stellen Sie sicher, dass die XSD-Datei am angegebenen Speicherort vorhanden ist, und versuchen Sie den Befehl dann erneut. - Failed to update Help for the module(s) : -'{0}' + Fehler beim Aktualisieren der Hilfe für das/die Modul(e): +„{0}“ {1} - Saving Help + Hilfe wird gespeichert - Help content contains files that are not valid. Only .txt and .xml files are supported. + Der Hilfeinhalt enthält ungültige Dateien. Es werden nur TXT- und XML-Dateien unterstützt. - Failed to save Help for the module(s) '{0}' : {1} + Fehler beim Speichern der Hilfe für das/die Modul(e) „{0}“: {1} - Failed to save Help for the module(s) '{0}' with UI culture(s) {{{1}}} : {2}. -English-US help content is available and can be saved using: Save-Help -UICulture en-US. + Fehler beim Speichern der Hilfe für das/die Modul(e) „{0}“ mit den Benutzeroberflächenkulturen {{{1}}}: {2}. +Englisch-US-Hilfeinhalte sind verfügbar und können mit folgendem Befehl gespeichert werden: Save-Help -UICulture en-US. - Failed to update Help for the module(s) '{0}' with UI culture(s) {{{1}}} : {2}. -English-US help content is available and can be installed using: Update-Help -UICulture en-US. + Fehler beim Aktualisieren der Hilfe für das/die Modul(e) „{0}“ mit den Benutzeroberflächenkulturen {{{1}}}: {2}. +Englisch-US-Hilfeinhalte sind verfügbar und können mit folgendem Befehl installiert werden: Update-Help -UICulture en-US. - Your current culture is ({0}), which is not associated with any language, consider changing your system culture or install the English-US help content using: Update-Help -UICulture en-US. + Ihre aktuelle Kultur ist ({0}) und ist keiner Sprache zugeordnet. Erwägen Sie, Ihre Systemkultur zu ändern, oder installieren Sie den Hilfeinhalt für Englisch-US mit: Update-Help -UICulture en-US. - false + falsch - The -Recurse parameter is only available if a source path is specified. + Der Parameter „-Recurse“ ist nur verfügbar, wenn ein Quellpfad angegeben ist. - The path {0} does not contain a FileSystem provider. Verify that the specified path contains the FileSystem provider, and then retry the command. + Der Pfad „{0}“ enthält keinen FileSystem-Anbieter. Stellen Sie sicher, dass der angegebene Pfad den FileSystem-Anbieter enthält, und versuchen Sie den Befehl dann erneut. - Searching Help for {0} ... + Suche nach Hilfe für „{0}“... - No UI culture was found that matches the following pattern: {0}. Verify the pattern and then try the command again. + Es wurde keine Benutzeroberflächenkultur gefunden, die dem folgenden Muster entspricht: {0}. Bestätigen Sie das Muster, und wiederholen Sie dann den Befehl. - Help was not saved for the module {0}, because the Save-Help command was run on this computer within the last 24 hours. -To save help again, add the Force parameter to your command. + Die Hilfe für das Modul „{0}“ wurde nicht gespeichert, da der Befehl Save-Help innerhalb der letzten 24 Stunden auf diesem Computer ausgeführt wurde. +Um die Hilfe erneut zu speichern, fügen Sie dem Befehl den Force-Parameter hinzu. - Help was not updated for the module {0}, because the Update-Help command was run on this computer within the last 24 hours. -To update help again, add the Force parameter to your command. + Die Hilfe für das Modul „{0}“ wurde nicht aktualisiert, da der Befehl Update-Help innerhalb der letzten 24 Stunden auf diesem Computer ausgeführt wurde. +Um die Hilfe erneut zu aktualisieren, fügen Sie dem Befehl den Force-Parameter hinzu. - The most current Help files are already installed. + Die aktuellsten Hilfedateien wurden bereits installiert. - {0}: {1}. Culture {2} Version {3} + {0}: {1}. Kultur {2} Version {3} - Updated {0} + „{0}“ aktualisiert - The value of the HelpInfoUri key in the module manifest must resolve to a container or root URL on a website where the help files are stored. The HelpInfoUri '{0}' does not resolve to a container. + Der Wert des HelpInfoUri-Schlüssels im Modulmanifest muss zu einer Container- oder Stamm-URL auf einer Website aufgelöst werden, auf der die Hilfedateien gespeichert sind. Die HelpInfoUri „{0}“ wird nicht zu einem Container aufgelöst. - Help content must be in the namespace {0}. + Der Hilfeinhalt muss sich im Namespace „{0}“ befinden. - Get-Help cannot find the Help files for this cmdlet on this computer. It is displaying only partial help. - -- To download and install Help files for the module that includes this cmdlet, use Update-Help. + Get-Help kann die Hilfedateien für dieses Cmdlet auf diesem Computer nicht finden. Es wird nur eine unvollständige Hilfe angezeigt. + – Um die Hilfedateien für das Modul herunterzuladen und zu installieren, das dieses Cmdlet enthält, verwenden Sie Update-Help. - The most current Help files are already downloaded. + Die aktuellsten Hilfedateien wurden bereits heruntergeladen. - Saved {0} + „{0}“ wurde gespeichert - The HelpInfoURI {0} does not start with HTTP. + Der HelpInfoURI „{0}“ beginnt nicht mit HTTP. - The root level element of the help content must be "helpItems". + Das Element auf Stammebene des Hilfeinhalts muss „helpItems“ lauten. - Saving Help for module {0} + Hilfe für Modul „{0}“ wird gespeichert. - Updating Help for module {0} + Hilfe für Modul „{0}“ wird aktualisiert. - Resolving URI: "{0}" + URI wird aufgelöst: „{0}“ - Help URI: {0} + Hilfe-URI: {0} - {0}, Current Version: {1}, Available Version: {2}, UICulture: {3} + {0}, Aktuelle Version: {1}, Verfügbare Version: {2}, UICulture: {3} - PROPERTIES + EIGENSCHAFTEN - METHODS + METHODEN \ No newline at end of file diff --git a/src/System.Management.Automation/resources/de/InternalCommandStrings.de.resx b/src/System.Management.Automation/resources/de/InternalCommandStrings.de.resx index 377a1f19d70..2b466978704 100644 --- a/src/System.Management.Automation/resources/de/InternalCommandStrings.de.resx +++ b/src/System.Management.Automation/resources/de/InternalCommandStrings.de.resx @@ -118,76 +118,76 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Input name "{0}" is ambiguous. It can be resolved to multiple matched methods. Possible matches include:{1}. + Der Eingabename „{0}“ ist nicht eindeutig. Er kann mehreren übereinstimmenden Methoden zugeordnet werden. Mögliche Übereinstimmungen sind:{1}. - Input name "{0}" is ambiguous. It can be resolved to multiple matched members. Possible matches include:{1}. + Der Eingabename „{0}“ ist nicht eindeutig. Er kann mehreren übereinstimmenden Membern zugeordnet werden. Mögliche Übereinstimmungen sind:{1}. - Retrieve the value for key '{0}' + Wert für Schlüssel „{0}“ abrufen - Invoke method '{0}' with arguments: {1} + Methode „{0}“ mit Argumenten aufrufen: {1} - Invoke method '{0}' + Methode „{0}“ aufrufen - Retrieve the value for property '{0}' + Wert für Eigenschaft „{0}“ abrufen InputObject: {0} - Cannot operate on a 'null' input object. + Ein NULL-Eingabeobjekt kann nicht verarbeitet werden. - Input name "{0}" cannot be resolved to a method. + Der Eingabename „{0}“ kann keiner Methode zugeordnet werden. - Cannot invoke a method in the restricted language mode. + Im Modus für eingeschränkte Sprache kann keine Methode aufgerufen werden. - The -WhatIf and -Confirm parameters are not supported for script blocks. + Die Parameter -WhatIf und -Confirm werden für Skriptblöcke nicht unterstützt. - The '{0}' operation is not allowed in the RestrictedLanguage mode. + Der Vorgang „{0}“ ist im RestrictedLanguage-Modus nicht zulässig. - An operator is required to compare the two specified values. Include a valid operator in the command, and then try the command again. For example, Get-Process | Where-Object -Property Name -eq Idle + Zum Vergleichen der beiden angegebenen Werte ist ein Operator erforderlich. Fügen Sie dem Befehl einen gültigen Operator hinzu, und versuchen Sie den Befehl dann erneut. Beispiel: Get-Process | Where-Object -Property Name -eq Idle - The input name "{0}" cannot be resolved to a property. + Der Eingabename „{0}“ kann keiner Eigenschaft zugeordnet werden. - The input name "{0}" cannot be resolved to a member. + Der Eingabename „{0}“ kann keinem Member zugeordnet werden. - The specified operator requires both the -Property and -Value parameters. Provide values for both parameters, and then try the command again. + Für den angegebenen Operator werden die Parameter -Property und -Value benötigt. Geben Sie für beide Parameter Werte an, und versuchen Sie den Befehl dann erneut. - This method cannot be run on the current thread. It can only be called on the cmdlet thread. + Diese Methode kann im aktuellen Thread nicht ausgeführt werden. Sie kann nur im Cmdlet-Thread aufgerufen werden. - A ForEach-Object -Parallel using variable cannot be a script block. Passed-in script block variables are not supported with ForEach-Object -Parallel, and can result in undefined behavior. + Ein ForEach-Object -Parallel, das eine Variable verwendet, darf kein Skriptblock sein. Übergebene Skriptblockvariablen werden mit ForEach-Object -Parallel nicht unterstützt und können zu undefiniertem Verhalten führen. - A ForEach-Object -Parallel piped input object cannot be a script block. Passed-in script block variables are not supported with ForEach-Object -Parallel, and can result in undefined behavior. + Ein per Pipeline übergebenes Eingabeobjekt für ForEach-Object -Parallel darf kein Skriptblock sein. Übergebene Skriptblockvariablen werden mit ForEach-Object -Parallel nicht unterstützt und können zu undefiniertem Verhalten führen. - The 'TimeoutSeconds' parameter cannot be used with the 'AsJob' parameter. + Der Parameter „TimeoutSeconds“ kann nicht zusammen mit dem Parameter „AsJob“ verwendet werden. - The following common parameters are not currently supported in the Parallel parameter set: + Die folgenden allgemeinen Parameter werden im Parametersatz Parallel derzeit nicht unterstützt: ErrorAction, WarningAction, InformationAction, PipelineVariable - An unexpected error has occurred while processing ForEach-Object -Parallel input. This may mean that some of the piped input did not get processed. Error: {0}. + Beim Verarbeiten der ForEach-Object -Parallel-Eingabe ist ein unerwarteter Fehler aufgetreten. Das kann bedeuten, dass ein Teil der per Pipeline übergebenen Eingaben nicht verarbeitet wurde. Fehler: {0}. ForEach-Object Cmdlet - Method invocation on type '{0}' will not be allowed when run in Constrained Language mode. + Ein Methodenaufruf für den Typ „{0}“ ist im Modus für eingeschränkte Sprache nicht zulässig. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/de/InternalHostUserInterfaceStrings.de.resx b/src/System.Management.Automation/resources/de/InternalHostUserInterfaceStrings.de.resx index 19396dacc2c..e90f1dc218a 100644 --- a/src/System.Management.Automation/resources/de/InternalHostUserInterfaceStrings.de.resx +++ b/src/System.Management.Automation/resources/de/InternalHostUserInterfaceStrings.de.resx @@ -118,106 +118,106 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - WriteDebug stopped because the value of the DebugPreference variable was 'Stop'. + WriteDebug wurde beendet, da der Wert der DebugPreference-Variable „Stop“ war. - The value {0} is not a supported ActionPreference value. + Der Wert „{0}“ wird nicht als unterstützter ActionPreference-Wert unterstützt. - The "{0}" parameter must contain at least one value. + Der Parameter „{0}“ muss mindestens einen Wert enthalten. - &Yes + &Ja - Continue. + Weiter - Yes to &All + Ja, &alle - Continue, and do not ask again whether to continue in this session. + Fortfahren, und in dieser Sitzung nicht noch einmal nachfragen, ob fortgefahren werden soll. - &No + &Nein - End the operation with an error. + Beenden Sie den Vorgang mit einem Fehler. - No to A&ll + Nein, &keine - End the operation with an error. Do not request to resume operation for this session. + Beenden Sie den Vorgang mit einem Fehler. Fordern Sie für diese Sitzung nicht an, den Vorgang fortzusetzen. - &Suspend + &Anhalten - Pause the current operation and enter a command prompt. Type "exit" to resume the paused operation. + Halten Sie den aktuellen Vorgang an und öffnen Sie eine Eingabeaufforderung. Geben Sie „exit“ ein, um den angehaltenen Vorgang fortzusetzen. - Continue with this operation? + Mit diesem Vorgang fortfahren? - (default is "{0}") + (Standard ist „{0}“) - (default choices are {0}) + (Standardoptionen sind {0}) - Choice[{0}]: + Auswahl[{0}]: - "{0}" should have at least one element. + „{0}“ muss mindestens ein Element aufweisen. - "{0}" must be a valid index into "{1}". "{2}" is not a valid index. + „{0}“ muss ein gültiger Index in „{1}“ sein. „{2}“ ist kein gültiger Index. - Cannot process the hot key because a question mark ("?") cannot be used as a hot key. + Der Hotkey kann nicht verarbeitet werden, da ein Fragezeichen („?“) nicht als Hotkey verwendet werden kann. - VERBOSE: {0} + AUSFÜHRLICH: {0} - WARNING: {0} + WARNUNG: {0} - DEBUG: {0} + DEBUGGEN: {0} - The host is not currently transcribing. + Der Host transkribiert derzeit nicht. - Command start time: {0} + Befehlsstartzeit: {0} ********************** -PowerShell transcript start -Start time: {0:yyyyMMddHHmmss} -Username: {1} -RunAs User: {2} -Configuration Name: {3} -Machine: {4} ({5}) -Host Application: {6} -Process ID: {7} +Beginn des PowerShell-Transkripts +Startzeit: {0:yyyyMMddHHmmss} +Benutzername: {1} +RunAs-Benutzer: {2} +Konfigurationsname: {3} +Computer: {4} ({5}) +Hostanwendung: {6} +Prozess-ID: {7} {8} ********************** ********************** -PowerShell transcript start -Start time: {0:yyyyMMddHHmmss} +Beginn des PowerShell-Transkripts +Startzeit: {0:yyyyMMddHHmmss} ********************** ********************** -PowerShell transcript end -End time: {0:yyyyMMddHHmmss} +Ende des PowerShell-Transkripts +Endzeit: {0:yyyyMMddHHmmss} ********************** - File path {0} resolves to a directory. + Der Dateipfad „{0}“ führt zu einem Verzeichnis. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/de/MiniShellErrors.de.resx b/src/System.Management.Automation/resources/de/MiniShellErrors.de.resx index b7d2e849e72..051c97528c1 100644 --- a/src/System.Management.Automation/resources/de/MiniShellErrors.de.resx +++ b/src/System.Management.Automation/resources/de/MiniShellErrors.de.resx @@ -118,9 +118,9 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The update is not supported for the runspace configuration category {0}. + Die Aktualisierung wird für die Runspacekonfigurationskategorie {0} nicht unterstützt. - The following errors occurred when updating the assembly list for the runspace: {0}. + Beim Aktualisieren der Assemblyliste für den Runspace sind folgende Fehler aufgetreten: {0}. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/de/NativeCP.de.resx b/src/System.Management.Automation/resources/de/NativeCP.de.resx index 0104024c3f5..aa2cc05cec6 100644 --- a/src/System.Management.Automation/resources/de/NativeCP.de.resx +++ b/src/System.Management.Automation/resources/de/NativeCP.de.resx @@ -118,30 +118,30 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - ScriptBlock should only be specified as a value of the Command parameter. + ScriptBlock darf nur als Wert des Commandparameters angegeben werden. - No value was specified for the Command parameter. + Für den Command-Parameter wurde kein Wert angegeben. - A value that is not valid ({6}) was specified for the {7} parameter. Valid values are Text and Xml. + Für den {6}-Parameter wurde ein ungültiger Wert ({7}) angegeben. Gültige Werte sind „Text“ und „XML“. - No value was specified for the InputFormat parameter. Valid values are Text and Xml. + Für den InputFormat-Parameter wurde kein Wert angegeben. Gültige Werte sind „Text“ und „XML“. - No value was specified for the OutputFormat parameter. Valid values are text and XML. + Für den OutputFormat-Parameter wurde kein Wert angegeben. Gültige Werte sind „Text“ und „XML“. - The {6} parameter requires a string value. + Der {6}-Parameter erfordert einen Zeichenfolgenwert. - No value was specified for the Args parameter. + Für den Args-Parameter wurde kein Wert angegeben. - The {6} parameter was already specified. + Der {6}-Parameter wurde bereits angegeben. - Cannot process the XML from the '{0}' stream of '{1}': {2} + Der XML-Code aus dem Stream „{0}“ von „{1}“ kann nicht verarbeitet werden: {2} \ No newline at end of file diff --git a/src/System.Management.Automation/resources/de/RunspaceInit.de.resx b/src/System.Management.Automation/resources/de/RunspaceInit.de.resx index acfb5605bb6..674187b86a9 100644 --- a/src/System.Management.Automation/resources/de/RunspaceInit.de.resx +++ b/src/System.Management.Automation/resources/de/RunspaceInit.de.resx @@ -118,114 +118,114 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Variable to hold the enabled experimental feature names + Variable zum Speichern der Namen der aktivierten experimentellen Features - Parent folder of the host application of the current runspace + Übergeordneter Ordner der Hostanwendung des aktuellen Runspace - Folder containing the current user's profile + Ordner mit dem Profil des aktuellen Benutzers - A reference to the host of the current runspace + Ein Verweis auf den Host des aktuellen Runspace. - The run objects available to cmdlets + Die für Cmdlets verfügbaren Laufzeitobjekte - Version information for current PowerShell session + Versionsinformationen für die aktuelle PowerShell-Sitzung - Current process ID + Aktuelle Prozess-ID - Status of last command + Status des letzten Befehls - Parent process ID + ID des übergeordneten Prozesses - The ShellID identifies the current shell. This is used by #Requires. + Die ShellID identifiziert die aktuelle Shell. Dies wird von #Requires verwendet. - Name of the current console file + Name der aktuellen Konsolendatei - The text encoding used when piping text to a native executable file + Die Textcodierung, die beim Weiterleiten von Text an eine native ausführbare Datei verwendet wird - The text encoding used when reading output text from a native executable file + Die Textcodierung, die beim Lesen von Ausgabetext aus einer nativen ausführbaren Datei verwendet wird - Configuration controlling how text is rendered. + Konfiguration, die steuert, wie Text gerendert wird. - Variable to contain the name of the email server. This can be used instead of the HostName parameter in the Send-MailMessage cmdlet. + Variable, die den Namen des E-Mail-Servers enthalten soll. Dies kann anstelle des HostName-Parameters im Cmdlet „Send-MailMessage“ verwendet werden. - Dictates when confirmation should be requested. Confirmation is requested when the ConfirmImpact of the operation is equal to or greater than $ConfirmPreference. If $ConfirmPreference is None, actions will only be confirmed when Confirm is specified. + Legt fest, wann eine Bestätigung angefordert werden soll. Eine Bestätigung wird angefordert, wenn der ConfirmImpact des Vorgangs gleich oder größer als $ConfirmPreference ist. Wenn $ConfirmPreference auf „None“ festgelegt ist, werden Aktionen nur bestätigt, wenn „Confirm“ angegeben ist. - Dictates the action taken when a Debug message is delivered + Legt die Aktion fest, die ausgeführt wird, wenn eine Debugmeldung übermittelt wird - Dictates the action taken when an error message is delivered + Legt die Aktion fest, die ausgeführt wird, wenn eine Fehlermeldung übermittelt wird - Dictates the action taken when progress records are delivered + Legt die Aktion fest, die beim Übermitteln von Statusdatensätzen ausgeführt wird - Dictates the action taken when a Verbose message is delivered + Legt die Aktion fest, die ausgeführt wird, wenn eine ausführliche Meldung übermittelt wird - Dictates the action taken when a Warning message is delivered + Legt die Aktion fest, die ausgeführt wird, wenn eine Warnmeldung übermittelt wird - Dictates the action taken when a command generates an item in the Information stream + Legt die Aktion fest, die ausgeführt wird, wenn ein Befehl ein Element im Informationsdatenstrom erzeugt - Dictates the view mode to use when displaying errors + Legt den Anzeigemodus fest, der beim Anzeigen von Fehlern verwendet wird - Dictates what type of prompt should be displayed for the current nesting level + Legt fest, welcher Prompttyp für die aktuelle Verschachtelungsebene angezeigt werden soll - If true, $ErrorActionPreference applies to native executables, so that non-zero exit codes will generate cmdlet-style errors governed by error action settings + Wenn TRUE, gilt $ErrorActionPreference auch für native ausführbare Dateien, sodass Exitcodes ungleich 0 Fehler im Cmdlet-Stil erzeugen, die von den Fehleraktionseinstellungen gesteuert werden. - If true, WhatIf is considered to be enabled for all commands. + Wenn TRUE, gilt WhatIf für alle Befehle als aktiviert. - Dictates how arguments are passed to native executables. + Legt fest, wie Argumente an native ausführbare Dateien übergeben werden. - Dictates the limit of enumeration on formatting IEnumerable objects + Legt das Aufzählungslimit beim Formatieren von IEnumerable-Objekten fest - Displays errors with a stack trace + Zeigt Fehler mit einer Stapelüberwachung an. - Displays errors with inner exceptions + Zeigt Fehler mit inneren Ausnahmen an. - Displays errors with their sources + Zeigt Fehler mit ihren Quellen an. - Displays errors with a description of the error class + Zeigt Fehler mit einer Beschreibung der Fehlerklasse an - Culture of the current PowerShell session + Kultur der aktuellen PowerShell-Sitzung - UI culture of the current PowerShell session + Benutzeroberflächenkultur der aktuellen PowerShell-Sitzung - Variable to hold all default <cmdlet:parameter, value> pairs + Variable, die alle Standard <cmdlet:parameter, value>-Paare enthält - Press Enter to continue... + Drücken Sie zum Fortsetzen die EINGABETASTE... - Edition information for the current PowerShell session + Edition-Informationen für die aktuelle PowerShell-Sitzung \ No newline at end of file diff --git a/src/System.Management.Automation/resources/es/HistoryStrings.es.resx b/src/System.Management.Automation/resources/es/HistoryStrings.es.resx index 7dffccf7a49..2d891ef2415 100644 --- a/src/System.Management.Automation/resources/es/HistoryStrings.es.resx +++ b/src/System.Management.Automation/resources/es/HistoryStrings.es.resx @@ -118,36 +118,36 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The identifier {0} is not a valid value for a History identifier. Specify a positive number, and then try again. + El identificador {0} no es un valor válido para un identificador de historial. Especifique un número positivo e inténtelo de nuevo. - Cannot locate the history for Id {0}. + No se puede localizar el historial del Id {0}. - The count cannot be combined with multiple Ids. + El recuento no se puede combinar con varios identificadores. - Cannot locate the history for command line {0}. + No se encuentra el historial de la línea de comandos {0}. - Cannot locate most recent history. + No se encuentra el historial más reciente. - The Invoke-History cmdlet is called repeatedly, in a loop. + El cmdlet Invoke-History se llama repetidamente, en un bucle. - Cannot process multiple history commands. You can only run a single command by using Invoke-History. + No se pueden procesar varios comandos de historial. Solo puede ejecutar un único comando mediante Invoke-History. - Cannot add history because the input object has a format that is not valid. + No se puede agregar el historial porque el objeto de entrada tiene un formato no válido. - The identifier {0} is not valid. Specify a positive number, and then try again. + El identificador {0} no es válido. Especifique un número positivo e inténtelo de nuevo. - This command will clear all the entries from the session history. + Este comando borrará todas las entradas del historial de sesiones. - The count cannot be combined with multiple CommandLine parameters. + El recuento no se puede combinar con varios parámetros CommandLine. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/es/InternalCommandStrings.es.resx b/src/System.Management.Automation/resources/es/InternalCommandStrings.es.resx index 377a1f19d70..99163bfb47e 100644 --- a/src/System.Management.Automation/resources/es/InternalCommandStrings.es.resx +++ b/src/System.Management.Automation/resources/es/InternalCommandStrings.es.resx @@ -118,76 +118,76 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Input name "{0}" is ambiguous. It can be resolved to multiple matched methods. Possible matches include:{1}. + El nombre de entrada "{0}" es ambiguo. Se puede resolver en varios métodos coincidentes. Las posibles coincidencias incluyen:{1}. - Input name "{0}" is ambiguous. It can be resolved to multiple matched members. Possible matches include:{1}. + El nombre de entrada "{0}" es ambiguo. Se puede resolver en varios miembros coincidentes. Las posibles coincidencias incluyen:{1}. - Retrieve the value for key '{0}' + Recuperar el valor de la clave "{0}" - Invoke method '{0}' with arguments: {1} + Invocar método "{0}" con argumentos: {1} - Invoke method '{0}' + Invocar método "{0}" - Retrieve the value for property '{0}' + Recuperar el valor de la propiedad "{0}" InputObject: {0} - Cannot operate on a 'null' input object. + No se puede operar en un objeto de entrada "null". - Input name "{0}" cannot be resolved to a method. + El nombre de entrada "{0}" no se puede resolver en un método. - Cannot invoke a method in the restricted language mode. + No se puede invocar un método en el modo de lenguaje restringido. - The -WhatIf and -Confirm parameters are not supported for script blocks. + Los parámetros -WhatIf y -Confirm no se admiten para los bloques de script. - The '{0}' operation is not allowed in the RestrictedLanguage mode. + No se permite la operación "{0}" en el modo RestrictedLanguage. - An operator is required to compare the two specified values. Include a valid operator in the command, and then try the command again. For example, Get-Process | Where-Object -Property Name -eq Idle + Se requiere un operador para comparar los dos valores especificados. Incluya un operador válido en el comando e inténtelo de nuevo. Por ejemplo, Get-Process | Where-Object -Property Name -eq Idle - The input name "{0}" cannot be resolved to a property. + El nombre de entrada "{0}" no se puede resolver en una propiedad. - The input name "{0}" cannot be resolved to a member. + El nombre de entrada "{0}" no se puede resolver en un miembro. - The specified operator requires both the -Property and -Value parameters. Provide values for both parameters, and then try the command again. + El operador especificado requiere los parámetros -Property y -Value. Proporcione valores para ambos parámetros e intente el comando de nuevo. - This method cannot be run on the current thread. It can only be called on the cmdlet thread. + Este método no se puede ejecutar en el subproceso actual. Solo se puede llamar en el subproceso del cmdlet. - A ForEach-Object -Parallel using variable cannot be a script block. Passed-in script block variables are not supported with ForEach-Object -Parallel, and can result in undefined behavior. + Un objeto ForEach -Parallel con variable no puede ser un bloque de script. Las variables de bloque de script pasadas no son compatibles con ForEach-Object -Parallel y pueden dar lugar a un comportamiento indefinido. - A ForEach-Object -Parallel piped input object cannot be a script block. Passed-in script block variables are not supported with ForEach-Object -Parallel, and can result in undefined behavior. + Un objeto de entrada canalizado en ForEach-Object -Parallel no puede ser un bloque de script. Las variables de bloque de script pasadas no son compatibles con ForEach-Object -Parallel y pueden dar lugar a un comportamiento indefinido. - The 'TimeoutSeconds' parameter cannot be used with the 'AsJob' parameter. + El parámetro "TimeoutSeconds" no se puede usar con el parámetro "AsJob". - The following common parameters are not currently supported in the Parallel parameter set: + Los siguientes parámetros comunes no se admiten actualmente en el conjunto de parámetros Parallel: ErrorAction, WarningAction, InformationAction, PipelineVariable - An unexpected error has occurred while processing ForEach-Object -Parallel input. This may mean that some of the piped input did not get processed. Error: {0}. + Error inesperado al procesar la entrada ForEach-Object -Parallel. Esto puede significar que parte de la entrada canalada no se procesó. Error: {0}. ForEach-Object Cmdlet - Method invocation on type '{0}' will not be allowed when run in Constrained Language mode. + No se permitirá la invocación de métodos en el tipo "{0}" al ejecutarse en modo de lenguaje restringido. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/es/InternalHostUserInterfaceStrings.es.resx b/src/System.Management.Automation/resources/es/InternalHostUserInterfaceStrings.es.resx index 19396dacc2c..a8db96c135a 100644 --- a/src/System.Management.Automation/resources/es/InternalHostUserInterfaceStrings.es.resx +++ b/src/System.Management.Automation/resources/es/InternalHostUserInterfaceStrings.es.resx @@ -118,106 +118,106 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - WriteDebug stopped because the value of the DebugPreference variable was 'Stop'. + WriteDebug se detuvo porque el valor de la variable DebugPreference era "Stop". - The value {0} is not a supported ActionPreference value. + El valor {0} no es un valor ActionPreference admitido. - The "{0}" parameter must contain at least one value. + El parámetro "{0}" debe contener al menos un valor. - &Yes + &Sí - Continue. + Continuar. - Yes to &All + Sí a &todo - Continue, and do not ask again whether to continue in this session. + Continúe y no vuelva a preguntar si desea continuar en esta sesión. &No - End the operation with an error. + Finalice la operación con un error. - No to A&ll + No a &todo - End the operation with an error. Do not request to resume operation for this session. + Finalice la operación con un error. No solicite reanudar la operación para esta sesión. - &Suspend + &Suspender - Pause the current operation and enter a command prompt. Type "exit" to resume the paused operation. + Pause la operación actual y escriba un símbolo del sistema. Escriba "exit" para reanudar la operación en pausa. - Continue with this operation? + ¿Desea continuar con esta operación? - (default is "{0}") + (el valor predeterminado es "{0}") - (default choices are {0}) + (las opciones predeterminadas son {0}) - Choice[{0}]: + Opción[{0}]: - "{0}" should have at least one element. + "{0}" debe tener al menos un elemento. - "{0}" must be a valid index into "{1}". "{2}" is not a valid index. + "{0}" debe ser un índice válido en "{1}". "{2}" no es un índice válido. - Cannot process the hot key because a question mark ("?") cannot be used as a hot key. + No se puede procesar la tecla activa porque no se puede usar un signo de interrogación ("?") como tecla activa. - VERBOSE: {0} + DETALLADO: {0} - WARNING: {0} + ADVERTENCIA: {0} - DEBUG: {0} + DEPURACIÓN: {0} - The host is not currently transcribing. + El host no se está transcribiendo actualmente. - Command start time: {0} + Hora de inicio del comando: {0} ********************** -PowerShell transcript start -Start time: {0:yyyyMMddHHmmss} -Username: {1} -RunAs User: {2} -Configuration Name: {3} -Machine: {4} ({5}) -Host Application: {6} -Process ID: {7} +Inicio de transcripción de PowerShell +Hora de inicio: {0:yyyyMMddHHmmss} +Nombre de usuario: {1} +Usuario de RunAs: {2} +Nombre de configuración: {3} +Máquina: {4} ({5}) +Aplicación host: {6} +Id. de proceso: {7} {8} ********************** ********************** -PowerShell transcript start -Start time: {0:yyyyMMddHHmmss} +Inicio de transcripción de PowerShell +Hora de inicio: {0:yyyyMMddHHmmss} ********************** ********************** -PowerShell transcript end -End time: {0:yyyyMMddHHmmss} +Fin de transcripción de PowerShell +Hora de finalización: {0:yyyyMMddHHmmss} ********************** - File path {0} resolves to a directory. + La ruta de acceso del archivo {0} se resuelve en un directorio. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/es/MiniShellErrors.es.resx b/src/System.Management.Automation/resources/es/MiniShellErrors.es.resx index b7d2e849e72..c37f1d6d154 100644 --- a/src/System.Management.Automation/resources/es/MiniShellErrors.es.resx +++ b/src/System.Management.Automation/resources/es/MiniShellErrors.es.resx @@ -118,9 +118,9 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The update is not supported for the runspace configuration category {0}. + No se admite la actualización en la categoría de configuración del espacio de ejecución {0}. - The following errors occurred when updating the assembly list for the runspace: {0}. + Se produjeron los siguientes errores al actualizar la lista de ensamblados para el espacio de ejecución: {0}. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/es/NativeCP.es.resx b/src/System.Management.Automation/resources/es/NativeCP.es.resx index 0104024c3f5..bd30bf27237 100644 --- a/src/System.Management.Automation/resources/es/NativeCP.es.resx +++ b/src/System.Management.Automation/resources/es/NativeCP.es.resx @@ -118,30 +118,30 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - ScriptBlock should only be specified as a value of the Command parameter. + ScriptBlock solo debe especificarse como un valor del parámetro Command. - No value was specified for the Command parameter. + No se especificó ningún valor para el parámetro Command. - A value that is not valid ({6}) was specified for the {7} parameter. Valid values are Text and Xml. + Se especificó un valor no válido ({6}) para el {7} parámetro. Los valores válidos son Text y Xml. - No value was specified for the InputFormat parameter. Valid values are Text and Xml. + No se especificó ningún valor para el parámetro InputFormat. Los valores válidos son Text y Xml. - No value was specified for the OutputFormat parameter. Valid values are text and XML. + No se especificó ningún valor para el parámetro OutputFormat. Los valores válidos son texto y XML. - The {6} parameter requires a string value. + El parámetro {6} requiere un valor de cadena. - No value was specified for the Args parameter. + No se especificó ningún valor para el parámetro Args. - The {6} parameter was already specified. + El parámetro {6} ya se especificó. - Cannot process the XML from the '{0}' stream of '{1}': {2} + No se puede procesar el XML de la secuencia "{0}" de "{1}": {2} \ No newline at end of file diff --git a/src/System.Management.Automation/resources/es/RunspaceInit.es.resx b/src/System.Management.Automation/resources/es/RunspaceInit.es.resx index acfb5605bb6..979c1ef8dbe 100644 --- a/src/System.Management.Automation/resources/es/RunspaceInit.es.resx +++ b/src/System.Management.Automation/resources/es/RunspaceInit.es.resx @@ -118,114 +118,114 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Variable to hold the enabled experimental feature names + Variable que contiene los nombres de características experimentales habilitados - Parent folder of the host application of the current runspace + Carpeta principal de la aplicación host del espacio de ejecución actual - Folder containing the current user's profile + Carpeta que contiene el perfil del usuario actual - A reference to the host of the current runspace + Referencia al host del espacio de ejecución actual - The run objects available to cmdlets + Los objetos de ejecución disponibles para los cmdlets - Version information for current PowerShell session + Información de versión de la sesión actual de PowerShell - Current process ID + Id. de proceso actual - Status of last command + Estado del último comando - Parent process ID + Id. de proceso primario - The ShellID identifies the current shell. This is used by #Requires. + ShellID identifica el shell actual. Lo usa #Requires. - Name of the current console file + Nombre del archivo de consola actual - The text encoding used when piping text to a native executable file + Codificación de texto usada al canalizar texto a un archivo ejecutable nativo - The text encoding used when reading output text from a native executable file + Codificación de texto usada al leer texto de salida de un archivo ejecutable nativo - Configuration controlling how text is rendered. + Configuración que controla cómo se representa el texto. - Variable to contain the name of the email server. This can be used instead of the HostName parameter in the Send-MailMessage cmdlet. + Variable que contiene el nombre del servidor de correo electrónico. Se puede usar en lugar del parámetro HostName en el cmdlet Send-MailMessage. - Dictates when confirmation should be requested. Confirmation is requested when the ConfirmImpact of the operation is equal to or greater than $ConfirmPreference. If $ConfirmPreference is None, actions will only be confirmed when Confirm is specified. + Dicta cuándo se debe solicitar la confirmación. Se solicita confirmación cuando el valor de ConfirmImpact de la operación es igual o mayor que $ConfirmPreference. Si $ConfirmPreference es None, las acciones solo se confirmarán cuando se especifique Confirm. - Dictates the action taken when a Debug message is delivered + Dicta la acción realizada cuando se entrega un mensaje de depuración - Dictates the action taken when an error message is delivered + Dicta la acción realizada cuando se entrega un mensaje de error - Dictates the action taken when progress records are delivered + Dicta la acción realizada cuando se entregan los registros de progreso - Dictates the action taken when a Verbose message is delivered + Dicta la acción realizada cuando se entrega un mensaje detallado - Dictates the action taken when a Warning message is delivered + Dicta la acción realizada cuando se entrega un mensaje de advertencia - Dictates the action taken when a command generates an item in the Information stream + Dicta la acción realizada cuando un comando genera un elemento en el flujo de información - Dictates the view mode to use when displaying errors + Dicta el modo de vista que se va a usar al mostrar errores - Dictates what type of prompt should be displayed for the current nesting level + Dicta qué tipo de mensaje debe mostrarse para el nivel de anidamiento actual - If true, $ErrorActionPreference applies to native executables, so that non-zero exit codes will generate cmdlet-style errors governed by error action settings + Si es true, $ErrorActionPreference se aplica a los ejecutables nativos, de modo que los códigos de salida distintos de cero generen errores al estilo de los cmdlets, según la configuración de la acción ante errores - If true, WhatIf is considered to be enabled for all commands. + Si es true, WhatIf se considera habilitado para todos los comandos. - Dictates how arguments are passed to native executables. + Determina cómo se pasan los argumentos a los ejecutables nativos. - Dictates the limit of enumeration on formatting IEnumerable objects + Dicta el límite de enumeración en el formato de objetos IEnumerable - Displays errors with a stack trace + Muestra los errores con un seguimiento de la pila - Displays errors with inner exceptions + Muestra errores con excepciones internas - Displays errors with their sources + Muestra errores con sus orígenes - Displays errors with a description of the error class + Muestra los errores con una descripción de la clase de error - Culture of the current PowerShell session + Referencia cultural de la sesión actual de PowerShell - UI culture of the current PowerShell session + Referencia cultural de la interfaz de usuario de la sesión actual de PowerShell - Variable to hold all default <cmdlet:parameter, value> pairs + Variable que contiene todos los pares predeterminados <cmdlet:parameter, value> - Press Enter to continue... + Presione Entrar para continuar... - Edition information for the current PowerShell session + Información de edición de la sesión actual de PowerShell \ No newline at end of file diff --git a/src/System.Management.Automation/resources/fr/HelpDisplayStrings.fr.resx b/src/System.Management.Automation/resources/fr/HelpDisplayStrings.fr.resx index 47ea5adf5c3..93ff281bd55 100644 --- a/src/System.Management.Automation/resources/fr/HelpDisplayStrings.fr.resx +++ b/src/System.Management.Automation/resources/fr/HelpDisplayStrings.fr.resx @@ -133,160 +133,160 @@ PARAMETERS - INPUTS + ENTRÉES - OUTPUTS + SORTIES - TERMINATING ERRORS + ERREURS DE FIN - NON-TERMINATING ERRORS + ERREURS SANS FIN D’EXÉCUTION - NOTES + REMARQUES - EXAMPLES + EXEMPLES Exemple - EXAMPLE + EXEMPLE - OUTPUT + SORTIE - RELATED LINKS + LIENS CONNEXES - SHORT DESCRIPTION + DESCRIPTION COURTE - Title: + Titre : - Question: + Question : Répondre - Term: + Terme : - Definition: + Définition : - Content: + Contenu : - PROVIDER NAME + NOM DU FOURNISSEUR - This cmdlet supports the common parameters: Verbose, Debug, + Cette applet de commande prend en charge les paramètres courants : Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, WarningVariable, - OutBuffer, PipelineVariable, and OutVariable. For more information, see + OutBuffer, PipelineVariable et OutVariable. Pour plus d’informations, consultez about_CommonParameters (https://go.microsoft.com/fwlink/?LinkID=113216). - Required? + Obligatoire ? - Position? + Position ? - Type: + Type : - Target Object Type: + Type d’objet cible : - Default value + Valeur par défaut - Accept pipeline input? + Accepter l'entrée de pipeline ? - Accept wildcard characters? + Accepter les caractères génériques ? - (Category: + (Catégorie : - Suggested Action: + Action suggérée : - For more information, type: + Pour plus d’informations, tapez la commande suivante : - For technical information, type: + Pour des informations techniques, tapez : - To see the examples, type: + Pour afficher les exemples, tapez : - For online help, type: + Pour obtenir de l’aide en ligne, tapez : <CommonParameters> - REMARKS + REMARQUES - true + vrai - Named + Nommé - DRIVES + LECTEURS - CAPABILITIES + CAPACITÉS - TASKS + TÂCHES - TASK: + TÂCHE : - FILTERS + FILTRES - DYNAMIC PARAMETERS + PARAMÈTRES DYNAMIQUES - Cmdlets Supported: + Applets de commande prises en charge : - ALIASES + ALIAS - Get-Help cannot find the Help files for this cmdlet on this computer. It is displaying only partial help. - -- To download and install Help files for the module that includes this cmdlet, use Update-Help. - -- To view the Help topic for this cmdlet online, type: "Get-Help {0} -Online" or - go to {1}. + Get-Help ne trouve pas les fichiers d’aide pour cette applet de commande sur cet ordinateur. Il affiche uniquement une aide partielle. + -- Pour télécharger et installer des fichiers d’aide pour le module qui inclut cette applet de commande, utilisez Update-Help. + -- Pour afficher la rubrique d’aide de cette applet de commande en ligne, tapez « Get-Help {0} -Online » ou + accédez à {1}. Aucun - Aliases + Alias - Dynamic? + Dynamique ? - Parameter set name + Nom du jeu de paramètres - Unable to retrieve the HelpInfo XML file for UI culture {0}. Make sure the HelpInfoUri property in the module manifest is valid or check your network connection and then try the command again. + Impossible de récupérer le fichier XML HelpInfo pour la culture d’interface utilisateur {0}. Vérifiez que la propriété HelpInfoUri dans le manifeste du module est valide ou vérifiez votre connexion réseau, puis réessayez la commande. ByPropertyName @@ -298,174 +298,174 @@ FromRemainingArguments - The specified culture is not supported: {0}. Specify a culture from the following list: {{{1}}}. + La culture spécifiée n’est pas prise en charge : {0}. Spécifiez une culture dans la liste suivante : {{{1}}}. - Postponing error and trying fallback cultures, will show as error if none of fallbacks are supported: + Le report de l’erreur et la tentative de cultures de secours s’affichent sous forme d’erreur si aucun des secours n’est pris en charge : {0} - The ModuleBase directory cannot be found. Verify the directory and try again. + Le répertoire ModuleBase est introuvable. Vérifiez le répertoire et réessayez. - The path {0} is not a valid directory. Make sure the directory exists and retry. + Le chemin d’accès {0} n’est pas un répertoire valide. Vérifiez que le répertoire existe et réessayez. - A Help URI cannot contain more than 10 redirections. Specify a valid Help URI. + Un URI d’aide ne peut pas contenir plus de 10 redirections. Spécifiez un URI d’aide valide. - Updating Help + Mise à jour de l’aide - Connecting to Help Content... + Connexion au contenu d’aide... - Downloading Help Content... + Téléchargement du contenu de l’aide... - Installing Help content... + Installation du contenu de l’aide... - Locating Help Content... + Localisation du contenu de l’aide... - (All) + (Tout) - No PowerShell modules were found that match the following pattern: {0}. Verify the pattern and then try the command again. + Aucun module PowerShell correspondant au modèle suivant n’a été trouvé : {0}. Vérifiez le modèle, puis réessayez la commande. - No PowerShell modules were found that match the specified FullyQualifiedModule {0}. Verify the FullyQualifiedModule value and then try the command again. + Aucun module PowerShell correspondant à la {0}FullyQualifiedModule spécifiée n’a été trouvé. Vérifiez la valeur FullyQualifiedModule, puis recommencez la commande. - Help content cannot be found. Make sure the server is available and the help content location is properly defined in the HelpInfo XML. + Le contenu de l’aide est introuvable. Vérifiez que le serveur est disponible et que l’emplacement du contenu de l’aide est correctement défini dans le code XML HelpInfo. - The Update-Help command failed because the specified module does not support updatable help. Use Get-Help -Online or look online for help for the commands in this module. + La commande Update-Help a échoué, car le module spécifié ne prend pas en charge l’aide pouvant être mise à jour. Utilisez Get-Help -Online ou recherchez en ligne de l’aide pour les commandes de ce module. - The following parameter must not be null or empty: Module. + Le paramètre suivant ne doit pas être nul ou vide : Module. - The following parameter must not be null or empty: Path. + Le paramètre suivant ne doit pas être nul ou vide : Chemin. - Update-Help has completed successfully. + Update-Help s’est terminé correctement. - Error extracting Help content. + Erreur lors de l’extraction du contenu de l’aide. - Unable to connect to Help content. The server on which Help content is stored might not be available. Verify that the server is available, or wait until the server is back online, and then try the command again. + Impossible de se connecter au contenu de l’aide. Le serveur sur lequel le contenu de l’aide est stocké n’est peut-être pas disponible. Vérifiez que le serveur est disponible ou attendez que le serveur soit de nouveau en ligne, puis réessayez la commande. - The Help content at the specified location is not valid. Specify a location that contains valid Help Content. + Le contenu de l’aide à l’emplacement spécifié n’est pas valide. Spécifiez un emplacement qui contient du contenu d’aide valide. - The HelpInfo XML is not valid. Specify valid HelpInfo XML. + Le code XML HelpInfo n’est pas valide. Spécifiez un code XML HelpInfo valide. - Help content was successfully saved to the following location: {0} + Le contenu de l’aide a été enregistré à l’emplacement suivant : {0} - The Help content XSD file cannot be found in {0}. Verify that the XSD file exists at the specified location, and then retry the command. + Le fichier XSD de contenu d’aide est introuvable dans {0}. Vérifiez que le fichier XSD existe à l’emplacement spécifié, puis réessayez la commande. - Failed to update Help for the module(s) : -'{0}' + Échec de la mise à jour de l'aide pour le(s) module(s) : +« {0} » {1} - Saving Help + Enregistrement de l’aide - Help content contains files that are not valid. Only .txt and .xml files are supported. + Le contenu de l’aide contient des fichiers qui ne sont pas valides. Seuls les fichiers .txt et .xml sont pris en charge. - Failed to save Help for the module(s) '{0}' : {1} + Échec de l’enregistrement de l’aide pour le ou les modules '{0}' : {1} - Failed to save Help for the module(s) '{0}' with UI culture(s) {{{1}}} : {2}. -English-US help content is available and can be saved using: Save-Help -UICulture en-US. + Échec de l’enregistrement de l’aide pour le ou les modules «{0}» avec la ou les cultures d’interface utilisateur {{{1}}} : {2}. +Le contenu de l’aide anglais-américain est disponible et peut être enregistré à l’aide de : Save-Help -UICulture en-US. - Failed to update Help for the module(s) '{0}' with UI culture(s) {{{1}}} : {2}. -English-US help content is available and can be installed using: Update-Help -UICulture en-US. + Échec de la mise à jour de l’aide pour le ou les modules «{0}» avec la ou les cultures d’interface utilisateur {{{1}}} : {2}. +Le contenu de l’aide anglais-américain est disponible et peut être installé à l’aide de : Update-Help -UICulture en-US. - Your current culture is ({0}), which is not associated with any language, consider changing your system culture or install the English-US help content using: Update-Help -UICulture en-US. + Votre culture actuelle est ({0}), qui n’est associée à aucune langue, envisagez de modifier votre culture système ou d’installer le contenu de l’aide en anglais aux États-Unis à l’aide de : Update-Help -UICulture en-US. - false + faux - The -Recurse parameter is only available if a source path is specified. + Le paramètre -Recurse est disponible uniquement si un chemin d’accès source est spécifié. - The path {0} does not contain a FileSystem provider. Verify that the specified path contains the FileSystem provider, and then retry the command. + Le chemin d’accès {0} ne contient pas de fournisseur FileSystem. Vérifiez que le chemin d’accès spécifié contient le fournisseur FileSystem, puis réessayez la commande. - Searching Help for {0} ... + Recherche de {0} dans l’aide... - No UI culture was found that matches the following pattern: {0}. Verify the pattern and then try the command again. + Aucune culture d’interface utilisateur correspondant au modèle suivant n’a été trouvée : {0}. Vérifiez le modèle, puis réessayez la commande. - Help was not saved for the module {0}, because the Save-Help command was run on this computer within the last 24 hours. -To save help again, add the Force parameter to your command. + L’aide n’a pas été enregistrée pour le module {0}, car la commande Save-Help a été exécutée sur cet ordinateur au cours des dernières 24 heures. +Pour enregistrer à nouveau l’aide, ajoutez le paramètre Force à votre commande. - Help was not updated for the module {0}, because the Update-Help command was run on this computer within the last 24 hours. -To update help again, add the Force parameter to your command. + L’aide n’a pas été mise à jour pour le module {0}, car la commande Update-Help a été exécutée sur cet ordinateur au cours des dernières 24 heures. +Pour mettre à jour à nouveau l’aide, ajoutez le paramètre Force à votre commande. - The most current Help files are already installed. + Les fichiers d’aide les plus courants sont déjà installés. - {0}: {1}. Culture {2} Version {3} + {0} : {1}. Version {2} culturelle {3} - Updated {0} + Mise à jour effectuée du {0} - The value of the HelpInfoUri key in the module manifest must resolve to a container or root URL on a website where the help files are stored. The HelpInfoUri '{0}' does not resolve to a container. + La valeur de la clé HelpInfoUri dans le manifeste de module doit être résolue en conteneur ou URL racine sur un site web où les fichiers d’aide sont stockés. HelpInfoUri '{0}' ne se résout pas en conteneur. - Help content must be in the namespace {0}. + Le contenu de l’aide doit se trouver dans l’espace de noms {0}. - Get-Help cannot find the Help files for this cmdlet on this computer. It is displaying only partial help. - -- To download and install Help files for the module that includes this cmdlet, use Update-Help. + Get-Help ne trouve pas les fichiers d’aide pour cette applet de commande sur cet ordinateur. Il affiche uniquement une aide partielle. + -- Pour télécharger et installer des fichiers d’aide pour le module qui inclut cette applet de commande, utilisez Update-Help. - The most current Help files are already downloaded. + Les fichiers d’aide les plus courants sont déjà téléchargés. - Saved {0} + {0} est enregistré - The HelpInfoURI {0} does not start with HTTP. + L' {0} HelpInfoURI ne commence pas par HTTP. - The root level element of the help content must be "helpItems". + L'élément racine du contenu d'aide doit être « helpItems ». - Saving Help for module {0} + Aide à l'enregistrement pour le module {0} - Updating Help for module {0} + Aide à la mise à jour du module {0} - Resolving URI: "{0}" + Résolution de l'URI : « {0} » - Help URI: {0} + URI d'aide : {0} - {0}, Current Version: {1}, Available Version: {2}, UICulture: {3} + {0}, Version actuelle : {1}, Version disponible : {2}, UICulture : {3} - PROPERTIES + PROPRIÉTÉS METHODS diff --git a/src/System.Management.Automation/resources/fr/HistoryStrings.fr.resx b/src/System.Management.Automation/resources/fr/HistoryStrings.fr.resx index 7dffccf7a49..9f967c1213d 100644 --- a/src/System.Management.Automation/resources/fr/HistoryStrings.fr.resx +++ b/src/System.Management.Automation/resources/fr/HistoryStrings.fr.resx @@ -118,36 +118,36 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The identifier {0} is not a valid value for a History identifier. Specify a positive number, and then try again. + L’identificateur {0} n’est pas une valeur valide pour un identificateur d’historique. Spécifiez un nombre positif, puis réessayez. - Cannot locate the history for Id {0}. + Nous ne pouvons pas trouver l’historique de l’ID {0}. - The count cannot be combined with multiple Ids. + Le nombre ne peut pas être combiné avec plusieurs ID. - Cannot locate the history for command line {0}. + Nous ne pouvons pas trouver l’historique de la ligne de commande {0}. - Cannot locate most recent history. + Nous ne pouvons pas trouver l’historique le plus récent. - The Invoke-History cmdlet is called repeatedly, in a loop. + La cmdlet Invoke-History est appelée à plusieurs reprises, dans une boucle. - Cannot process multiple history commands. You can only run a single command by using Invoke-History. + Nous ne pouvons pas traiter plusieurs commandes d’historique. Vous ne pouvez exécuter qu’une seule commande en utilisant Invoke-History. - Cannot add history because the input object has a format that is not valid. + Nous ne pouvons pas ajouter l’historique, car le format de l’objet d’entrée n’est pas valide. - The identifier {0} is not valid. Specify a positive number, and then try again. + L’identificateur {0} n’est pas valide. Spécifiez un nombre positif, puis réessayez. - This command will clear all the entries from the session history. + Cette commande effacera toutes les entrées de l’historique de session. - The count cannot be combined with multiple CommandLine parameters. + Le nombre ne peut pas être combiné avec plusieurs paramètres CommandLine. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/fr/InternalHostUserInterfaceStrings.fr.resx b/src/System.Management.Automation/resources/fr/InternalHostUserInterfaceStrings.fr.resx index 19396dacc2c..312254c7472 100644 --- a/src/System.Management.Automation/resources/fr/InternalHostUserInterfaceStrings.fr.resx +++ b/src/System.Management.Automation/resources/fr/InternalHostUserInterfaceStrings.fr.resx @@ -118,106 +118,106 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - WriteDebug stopped because the value of the DebugPreference variable was 'Stop'. + WriteDebug s’est arrêté, car la valeur de la variable DebugPreference était « Stop ». - The value {0} is not a supported ActionPreference value. + La valeur {0} n’est pas une valeur ActionPreference prise en charge. - The "{0}" parameter must contain at least one value. + Le paramètre « {0} » doit contenir au moins une valeur. - &Yes + &Oui - Continue. + Continuer. - Yes to &All + Oui pour &tout - Continue, and do not ask again whether to continue in this session. + Continuer et ne plus me demander si je dois continuer dans cette session. - &No + &Non - End the operation with an error. + Terminez l’opération avec une erreur. - No to A&ll + Non pou&r tout - End the operation with an error. Do not request to resume operation for this session. + Terminez l’opération avec une erreur. Ne demandez pas à reprendre l’opération pour cette session. - &Suspend + &Suspendre - Pause the current operation and enter a command prompt. Type "exit" to resume the paused operation. + Interrompez l’opération en cours et ouvrez une invite de commandes. Tapez « exit » pour reprendre l’opération suspendue. - Continue with this operation? + Voulez-vous continuer cette opération ? - (default is "{0}") + (la valeur par défaut est « {0} ») - (default choices are {0}) + (les choix par défaut sont {0}) - Choice[{0}]: + Choix[{0}] : - "{0}" should have at least one element. + « {0} » doit comporter au moins un élément. - "{0}" must be a valid index into "{1}". "{2}" is not a valid index. + « {0} » doit être un index valide dans « {1} ». « {2} » n’est pas un index valide. - Cannot process the hot key because a question mark ("?") cannot be used as a hot key. + Nous ne pouvons pas traiter la touche d’accès rapide, car un point d’interrogation (« ? ») ne peut pas être utilisé comme touche d’accès rapide. - VERBOSE: {0} + DÉTAILLÉ : {0} - WARNING: {0} + AVERTISSEMENT : {0} - DEBUG: {0} + DÉBOGUER : {0} - The host is not currently transcribing. + L’hôte n’effectue actuellement aucune transcription. - Command start time: {0} + Heure de début de la commande : {0} ********************** -PowerShell transcript start -Start time: {0:yyyyMMddHHmmss} -Username: {1} -RunAs User: {2} -Configuration Name: {3} -Machine: {4} ({5}) -Host Application: {6} -Process ID: {7} +Début de la transcription PowerShell +Heure de début : {0:yyyyMMddHHmmss} +Nom d’utilisateur : {1} +Utilisateur RunAs : {2} +Nom de la configuration : {3} +Ordinateur : {4} ({5}) +Application hôte : {6} +ID de processus : {7} {8} ********************** ********************** -PowerShell transcript start -Start time: {0:yyyyMMddHHmmss} +Début de la transcription PowerShell +Heure de début : {0:yyyyMMddHHmmss} ********************** ********************** -PowerShell transcript end -End time: {0:yyyyMMddHHmmss} +Fin de la transcription PowerShell +Heure de fin : {0:yyyyMMddHHmmss} ********************** - File path {0} resolves to a directory. + Le chemin d’accès au fichier {0} correspond à un répertoire. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/fr/MiniShellErrors.fr.resx b/src/System.Management.Automation/resources/fr/MiniShellErrors.fr.resx index b7d2e849e72..5c32dc7147e 100644 --- a/src/System.Management.Automation/resources/fr/MiniShellErrors.fr.resx +++ b/src/System.Management.Automation/resources/fr/MiniShellErrors.fr.resx @@ -118,9 +118,9 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The update is not supported for the runspace configuration category {0}. + La mise à jour n’est pas prise en charge pour la catégorie de configuration de l’instance d’exécution {0}. - The following errors occurred when updating the assembly list for the runspace: {0}. + Les erreurs suivantes se sont produites lors de la mise à jour de la liste d’assemblages pour l’instance d’exécution : {0}. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/fr/NativeCP.fr.resx b/src/System.Management.Automation/resources/fr/NativeCP.fr.resx index 0104024c3f5..fd01c7c4a49 100644 --- a/src/System.Management.Automation/resources/fr/NativeCP.fr.resx +++ b/src/System.Management.Automation/resources/fr/NativeCP.fr.resx @@ -118,30 +118,30 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - ScriptBlock should only be specified as a value of the Command parameter. + Vous ne devez pas spécifier ScriptBlock qu’en tant que valeur du paramètre Command. - No value was specified for the Command parameter. + Aucune valeur n’a été spécifiée pour le paramètre Command. - A value that is not valid ({6}) was specified for the {7} parameter. Valid values are Text and Xml. + Une valeur non valide ({6}) a été spécifiée pour le paramètre {7}. Les valeurs valides sont Text et Xml. - No value was specified for the InputFormat parameter. Valid values are Text and Xml. + Aucune valeur n’a été spécifiée pour le paramètre InputFormat. Les valeurs valides sont Text et Xml. - No value was specified for the OutputFormat parameter. Valid values are text and XML. + Aucune valeur n’a été spécifiée pour le paramètre OutputFormat. Les valeurs valides sont texte et XML. - The {6} parameter requires a string value. + Le paramètre {6} nécessite une valeur de chaîne. - No value was specified for the Args parameter. + Aucune valeur n’a été spécifiée pour le paramètre Args. - The {6} parameter was already specified. + Le paramètre {6} a déjà été spécifié. - Cannot process the XML from the '{0}' stream of '{1}': {2} + Nous ne pouvons pas traiter le code XML du flux « {0} » de « {1} » : {2} \ No newline at end of file diff --git a/src/System.Management.Automation/resources/fr/RunspaceInit.fr.resx b/src/System.Management.Automation/resources/fr/RunspaceInit.fr.resx index acfb5605bb6..70babfb9e60 100644 --- a/src/System.Management.Automation/resources/fr/RunspaceInit.fr.resx +++ b/src/System.Management.Automation/resources/fr/RunspaceInit.fr.resx @@ -118,114 +118,114 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Variable to hold the enabled experimental feature names + Variable qui contient les noms des fonctionnalités expérimentales activées - Parent folder of the host application of the current runspace + Dossier parent de l’application hôte de l’instance d’exécution actuelle - Folder containing the current user's profile + Dossier contenant le profil de l’utilisateur actuel - A reference to the host of the current runspace + Une référence à l’hôte de l’instance d’exécution actuel - The run objects available to cmdlets + Objets d’exécution disponibles pour les cmdlets - Version information for current PowerShell session + Informations sur la version pour la session PowerShell actuelle - Current process ID + ID du processus actuel - Status of last command + État de la dernière commande - Parent process ID + ID du processus parent - The ShellID identifies the current shell. This is used by #Requires. + Le ShellID identifie le shell actuel. Ceci est utilisé par #Requires. - Name of the current console file + Nom du fichier de console actuel - The text encoding used when piping text to a native executable file + Encodage de texte utilisé lors de l’envoi du texte vers un fichier exécutable natif - The text encoding used when reading output text from a native executable file + Encodage de texte utilisé lors de la lecture du texte de sortie d’un fichier exécutable natif - Configuration controlling how text is rendered. + Configuration qui contrôle le rendu du texte. - Variable to contain the name of the email server. This can be used instead of the HostName parameter in the Send-MailMessage cmdlet. + Variable qui contient le nom du serveur de messagerie. Vous pouvez l’utiliser à la place du paramètre HostName dans la cmdlet Send-MailMessage. - Dictates when confirmation should be requested. Confirmation is requested when the ConfirmImpact of the operation is equal to or greater than $ConfirmPreference. If $ConfirmPreference is None, actions will only be confirmed when Confirm is specified. + Détermine quand une confirmation doit être demandée. La confirmation est demandée lorsque la valeur ConfirmImpact de l’opération est égale ou supérieure à $ConfirmPreference. Si $ConfirmPreference a la valeur None, les actions ne sont confirmées que lorsque Confirm est spécifié. - Dictates the action taken when a Debug message is delivered + Indique l’action effectuée lorsqu’un message Déboguer est remis - Dictates the action taken when an error message is delivered + Indique l’action effectuée lorsqu’un message d’erreur est remis - Dictates the action taken when progress records are delivered + Indique l’action effectuée lorsque des enregistrements de progression sont remis - Dictates the action taken when a Verbose message is delivered + Indique l’action effectuée lorsqu’un message Détaillé est remis - Dictates the action taken when a Warning message is delivered + Indique l’action effectuée lorsqu’un message Avertissement est remis - Dictates the action taken when a command generates an item in the Information stream + Indique l’action effectuée lorsqu’une commande génère un élément dans le flux Informations - Dictates the view mode to use when displaying errors + Détermine le mode d’affichage à utiliser lors de l’affichage des erreurs - Dictates what type of prompt should be displayed for the current nesting level + Indique le type de requête à afficher pour le niveau d’imbrication actuel - If true, $ErrorActionPreference applies to native executables, so that non-zero exit codes will generate cmdlet-style errors governed by error action settings + Si la valeur est true, $ErrorActionPreference s’applique aux exécutables natifs, afin que les codes de sortie non nuls génèrent des erreurs de type cmdlet régies par les paramètres d’action pour l’erreur - If true, WhatIf is considered to be enabled for all commands. + Si la valeur est true, WhatIf est considéré comme activé pour toutes les commandes. - Dictates how arguments are passed to native executables. + Détermine la manière dont les arguments sont passés aux exécutables natifs. - Dictates the limit of enumeration on formatting IEnumerable objects + Indique la limite d’énumération lors de la mise en forme des objets IEnumerable - Displays errors with a stack trace + Affiche les erreurs avec une trace - Displays errors with inner exceptions + Affiche les erreurs avec les exceptions internes - Displays errors with their sources + Affiche les erreurs avec leur source - Displays errors with a description of the error class + Affiche les erreurs avec une description de la classe d’erreur - Culture of the current PowerShell session + Culture de la session PowerShell actuelle - UI culture of the current PowerShell session + Culture de l’interface utilisateur de la session PowerShell actuelle - Variable to hold all default <cmdlet:parameter, value> pairs + Variable pour stocker toutes les paires par défaut <cmdlet:parameter, value> - Press Enter to continue... + Appuyez sur ENTRÉE pour continuer... - Edition information for the current PowerShell session + Informations d’édition pour la session PowerShell actuelle \ No newline at end of file diff --git a/src/System.Management.Automation/resources/it/NativeCP.it.resx b/src/System.Management.Automation/resources/it/NativeCP.it.resx index 0104024c3f5..9c297d84cab 100644 --- a/src/System.Management.Automation/resources/it/NativeCP.it.resx +++ b/src/System.Management.Automation/resources/it/NativeCP.it.resx @@ -118,30 +118,30 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - ScriptBlock should only be specified as a value of the Command parameter. + ScriptBlock deve essere specificato solo come valore del parametro Command. - No value was specified for the Command parameter. + Nessun valore specificato per il parametro Command. - A value that is not valid ({6}) was specified for the {7} parameter. Valid values are Text and Xml. + È stato specificato un valore non valido ({6}) per il parametro {7}. I valori validi sono Text e Xml. - No value was specified for the InputFormat parameter. Valid values are Text and Xml. + Non è stato specificato alcun valore per il parametro InputFormat. I valori validi sono Text e Xml. - No value was specified for the OutputFormat parameter. Valid values are text and XML. + Non è stato specificato alcun valore per il parametro OutputFormat. I valori validi sono Text e Xml. - The {6} parameter requires a string value. + Il parametro {6} richiede un valore stringa. - No value was specified for the Args parameter. + Nessun valore specificato per il parametro Args. - The {6} parameter was already specified. + Il parametro {6} è già stato specificato. - Cannot process the XML from the '{0}' stream of '{1}': {2} + Non è possibile elaborare l'XML dal flusso ''{0}'' di ''{1}'': {2} \ No newline at end of file diff --git a/src/System.Management.Automation/resources/it/RunspaceInit.it.resx b/src/System.Management.Automation/resources/it/RunspaceInit.it.resx index acfb5605bb6..2041d3ab486 100644 --- a/src/System.Management.Automation/resources/it/RunspaceInit.it.resx +++ b/src/System.Management.Automation/resources/it/RunspaceInit.it.resx @@ -118,114 +118,114 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Variable to hold the enabled experimental feature names + Variabile che contiene i nomi delle funzionalità sperimentali abilitate - Parent folder of the host application of the current runspace + Cartella padre dell'applicazione host dello spazio di esecuzione corrente - Folder containing the current user's profile + Cartella contenente il profilo dell'utente corrente - A reference to the host of the current runspace + Riferimento all'host dello spazio di esecuzione corrente - The run objects available to cmdlets + Oggetti di esecuzione disponibili per i cmdlet - Version information for current PowerShell session + Informazioni sulla versione per la sessione corrente di PowerShell - Current process ID + ID processo corrente - Status of last command + Stato dell'ultimo comando - Parent process ID + ID processo padre - The ShellID identifies the current shell. This is used by #Requires. + ShellID identifica la shell corrente. Viene usato da #Requires. - Name of the current console file + Nome del file della console corrente - The text encoding used when piping text to a native executable file + Codifica del testo utilizzata per l'invio di testo tramite pipe a un file eseguibile nativo - The text encoding used when reading output text from a native executable file + Codifica del testo utilizzata quando si legge il testo di output da un file eseguibile nativo - Configuration controlling how text is rendered. + Configurazione che controlla la modalità di rendering del testo. - Variable to contain the name of the email server. This can be used instead of the HostName parameter in the Send-MailMessage cmdlet. + Variabile che contiene il nome del server di posta. Può essere usata al posto del parametro HostName nel cmdlet Send-MailMessage. - Dictates when confirmation should be requested. Confirmation is requested when the ConfirmImpact of the operation is equal to or greater than $ConfirmPreference. If $ConfirmPreference is None, actions will only be confirmed when Confirm is specified. + Determina quando deve essere richiesta la conferma. La conferma viene richiesta quando il valore di ConfirmImpact dell'operazione è maggiore o uguale a $ConfirmPreference. Se $ConfirmPreference è None, le azioni verranno confermate solo quando viene specificato Confirm. - Dictates the action taken when a Debug message is delivered + Determina l'azione intrapresa quando viene recapitato un messaggio di debug - Dictates the action taken when an error message is delivered + Determina l'azione intrapresa quando viene recapitato un messaggio di errore - Dictates the action taken when progress records are delivered + Determina l'azione intrapresa quando vengono recapitati i record di stato - Dictates the action taken when a Verbose message is delivered + Determina l'azione intrapresa quando viene recapitato un messaggio dettagliato - Dictates the action taken when a Warning message is delivered + Determina l'azione intrapresa quando viene recapitato un messaggio di avviso - Dictates the action taken when a command generates an item in the Information stream + Determina l'azione intrapresa quando un comando genera un elemento nel flusso Informazioni - Dictates the view mode to use when displaying errors + Determina la modalità di visualizzazione da usare quando si visualizzano gli errori - Dictates what type of prompt should be displayed for the current nesting level + Determina il tipo di prompt da visualizzare per il livello di annidamento corrente - If true, $ErrorActionPreference applies to native executables, so that non-zero exit codes will generate cmdlet-style errors governed by error action settings + Se true, $ErrorActionPreference si applica agli eseguibili nativi, in modo che i codici di uscita diversi da zero generino errori di tipo cmdlet gestiti dalle impostazioni dell'azione di errore - If true, WhatIf is considered to be enabled for all commands. + Se true, WhatIf viene considerato abilitato per tutti i comandi. - Dictates how arguments are passed to native executables. + Determina il modo in cui gli argomenti vengono passati agli eseguibili nativi. - Dictates the limit of enumeration on formatting IEnumerable objects + Determina il limite di enumerazione per la formattazione di oggetti IEnumerable - Displays errors with a stack trace + Visualizza gli errori con un'analisi dello stack - Displays errors with inner exceptions + Visualizza gli errori con eccezioni interne - Displays errors with their sources + Visualizza gli errori con le relative origini - Displays errors with a description of the error class + Visualizza gli errori con una descrizione della classe di errore - Culture of the current PowerShell session + Impostazioni cultura della sessione corrente di PowerShell - UI culture of the current PowerShell session + Impostazioni cultura dell'interfaccia utente della sessione corrente di PowerShell - Variable to hold all default <cmdlet:parameter, value> pairs + Variabile che contiene tutte le coppie <cmdlet:parameter, value> predefinite - Press Enter to continue... + Premere INVIO per continuare... - Edition information for the current PowerShell session + Informazioni sull'edizione della sessione corrente di PowerShell \ No newline at end of file diff --git a/src/System.Management.Automation/resources/ja/InternalCommandStrings.ja.resx b/src/System.Management.Automation/resources/ja/InternalCommandStrings.ja.resx index 377a1f19d70..84c41f43dcb 100644 --- a/src/System.Management.Automation/resources/ja/InternalCommandStrings.ja.resx +++ b/src/System.Management.Automation/resources/ja/InternalCommandStrings.ja.resx @@ -118,76 +118,76 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Input name "{0}" is ambiguous. It can be resolved to multiple matched methods. Possible matches include:{1}. + 名前 "{0}" があいまいです。一致した複数のメソッドに解決できます。一致の可能性は次のとおりです:{1}。 - Input name "{0}" is ambiguous. It can be resolved to multiple matched members. Possible matches include:{1}. + 入力名 "{0}" があいまいです。一致した複数のメンバーに解決できます。一致の可能性は次のとおりです:{1}。 - Retrieve the value for key '{0}' + キー '{0}' の値を取得する - Invoke method '{0}' with arguments: {1} + 引数を指定してメソッド '{0}' を呼び出す: {1} - Invoke method '{0}' + メソッド '{0}' を呼び出す - Retrieve the value for property '{0}' + プロパティ '{0}' の値を取得します InputObject: {0} - Cannot operate on a 'null' input object. + 'null' 入力オブジェクトに対して操作することはできません。 - Input name "{0}" cannot be resolved to a method. + 入力名 "{0}" はメソッドに解決できません。 - Cannot invoke a method in the restricted language mode. + 制限付き言語モードでメソッドを呼び出すことはできません。 - The -WhatIf and -Confirm parameters are not supported for script blocks. + -WhatIf パラメーターと -Confirm パラメーターは、スクリプト ブロックではサポートされていません。 - The '{0}' operation is not allowed in the RestrictedLanguage mode. + '{0}' 操作は RestrictedLanguage モードでは許可されていません。 - An operator is required to compare the two specified values. Include a valid operator in the command, and then try the command again. For example, Get-Process | Where-Object -Property Name -eq Idle + 指定した 2 つの値を比較するには、演算子が必要です。コマンドに有効な演算子を含めてから、コマンドを再試行してください。たとえば、Get-Process | Where-Object -Property Name -eq Idle - The input name "{0}" cannot be resolved to a property. + 入力名 "{0}" はプロパティに解決できません。 - The input name "{0}" cannot be resolved to a member. + 入力名 "{0}" はメンバーに解決できません。 - The specified operator requires both the -Property and -Value parameters. Provide values for both parameters, and then try the command again. + 指定された演算子には、-Property パラメーターと -Value パラメーターの両方が必要です。両方のパラメーターの値を指定してから、コマンドを再試行してください。 - This method cannot be run on the current thread. It can only be called on the cmdlet thread. + このメソッドは現在のスレッドでは実行できません。コマンドレット スレッドでのみ呼び出すことができます。 - A ForEach-Object -Parallel using variable cannot be a script block. Passed-in script block variables are not supported with ForEach-Object -Parallel, and can result in undefined behavior. + 変数を使用する ForEach-Object -Parallel をスクリプト ブロックにすることはできません。Passed-in スクリプト ブロック変数は ForEach-Object -Parallel ではサポートされていないため、未定義の動作が発生する可能性があります。 - A ForEach-Object -Parallel piped input object cannot be a script block. Passed-in script block variables are not supported with ForEach-Object -Parallel, and can result in undefined behavior. + ForEach-Object -Parallel パイプ入力オブジェクトをスクリプト ブロックにすることはできません。Passed-in スクリプト ブロック変数は ForEach-Object -Parallel ではサポートされていないため、未定義の動作が発生する可能性があります。 - The 'TimeoutSeconds' parameter cannot be used with the 'AsJob' parameter. + 'TimeoutSeconds' パラメーターを 'AsJob' パラメーターと共に使用することはできません。 - The following common parameters are not currently supported in the Parallel parameter set: + Parallel パラメーター セットでは、次の共通パラメーターは現在サポートされていません: ErrorAction, WarningAction, InformationAction, PipelineVariable - An unexpected error has occurred while processing ForEach-Object -Parallel input. This may mean that some of the piped input did not get processed. Error: {0}. + ForEach-Object -Parallel 入力の処理中に予期しないエラーが発生しました。これは、パイプ処理された入力の一部が処理されなかったことを意味する可能性があります。エラーは {0} です。 - ForEach-Object Cmdlet + ForEach-Object コマンドレット - Method invocation on type '{0}' will not be allowed when run in Constrained Language mode. + 制約付き言語モードで実行する場合、型 '{0}' でのメソッドの呼び出しは許可されません。 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/ja/InternalHostUserInterfaceStrings.ja.resx b/src/System.Management.Automation/resources/ja/InternalHostUserInterfaceStrings.ja.resx index 19396dacc2c..12619b674e2 100644 --- a/src/System.Management.Automation/resources/ja/InternalHostUserInterfaceStrings.ja.resx +++ b/src/System.Management.Automation/resources/ja/InternalHostUserInterfaceStrings.ja.resx @@ -118,106 +118,106 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - WriteDebug stopped because the value of the DebugPreference variable was 'Stop'. + DebugPreference 変数の値が 'Stop' であったため、WriteDebug が停止しました。 - The value {0} is not a supported ActionPreference value. + {0} 値はサポートされている ActionPreference 値ではありません。 - The "{0}" parameter must contain at least one value. + "{0}" パラメーターには、少なくとも 1 つの値を含む必要があります。 - &Yes + はい(&Y) - Continue. + 続行します。 - Yes to &All + すべてはい(&A) - Continue, and do not ask again whether to continue in this session. + 続行し、このセッションを続行するかどうかを再度確認しないでください。 - &No + いいえ(&N) - End the operation with an error. + 操作をエラーで終了します。 - No to A&ll + すべていいえ(&L) - End the operation with an error. Do not request to resume operation for this session. + 操作をエラーで終了します。このセッションの操作の再開を要求しないでください。 - &Suspend + 一時停止(&S) - Pause the current operation and enter a command prompt. Type "exit" to resume the paused operation. + 現在の操作を一時停止し、コマンド プロンプトを入力します。一時停止した操作を再開するには、「exit」と入力します。 - Continue with this operation? + この操作を続行しますか? - (default is "{0}") + (既定値は "{0}" です) - (default choices are {0}) + (既定の選択肢は {0} です) - Choice[{0}]: + 選択肢[{0}]: - "{0}" should have at least one element. + "{0}" には少なくとも 1 つの要素が必要です。 - "{0}" must be a valid index into "{1}". "{2}" is not a valid index. + "{0}" は "{1}" の有効なインデックスである必要があります。"{2}" は有効なインデックスではありません。 - Cannot process the hot key because a question mark ("?") cannot be used as a hot key. + 疑問符 ("?") はホット キーとして使用できないため、ホット キーを処理できません。 - VERBOSE: {0} + 詳細: {0} - WARNING: {0} + 警告: {0} - DEBUG: {0} + デバッグ: {0} - The host is not currently transcribing. + ホストは現在文字起こししていません。 - Command start time: {0} + コマンドの開始時刻: {0} ********************** -PowerShell transcript start -Start time: {0:yyyyMMddHHmmss} -Username: {1} -RunAs User: {2} -Configuration Name: {3} -Machine: {4} ({5}) -Host Application: {6} -Process ID: {7} +PowerShell トランスクリプトの開始 +開始時刻: {0:yyyyMMddHHmmss} +ユーザー名: {1} +RunAs ユーザー: {2} +構成名: {3} +マシン: {4} ({5}) +ホスト アプリケーション: {6} +プロセス ID: {7} {8} ********************** ********************** -PowerShell transcript start -Start time: {0:yyyyMMddHHmmss} +PowerShell トランスクリプトの開始 +開始時刻: {0:yyyyMMddHHmmss} ********************** ********************** -PowerShell transcript end -End time: {0:yyyyMMddHHmmss} +PowerShell トランスクリプトの終了 +終了時刻: {0:yyyyMMddHHmmss} ********************** - File path {0} resolves to a directory. + ファイル パス {0} はディレクトリに解決されます。 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/ja/MiniShellErrors.ja.resx b/src/System.Management.Automation/resources/ja/MiniShellErrors.ja.resx index b7d2e849e72..ac3b8e43c02 100644 --- a/src/System.Management.Automation/resources/ja/MiniShellErrors.ja.resx +++ b/src/System.Management.Automation/resources/ja/MiniShellErrors.ja.resx @@ -118,9 +118,9 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The update is not supported for the runspace configuration category {0}. + この更新は、実行空間構成カテゴリ {0} ではサポートされていません。 - The following errors occurred when updating the assembly list for the runspace: {0}. + 実行空間のアセンブリ リストを更新中に次のエラーが発生しました: {0}。 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/ja/NativeCP.ja.resx b/src/System.Management.Automation/resources/ja/NativeCP.ja.resx index 0104024c3f5..c390779cbbd 100644 --- a/src/System.Management.Automation/resources/ja/NativeCP.ja.resx +++ b/src/System.Management.Automation/resources/ja/NativeCP.ja.resx @@ -118,30 +118,30 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - ScriptBlock should only be specified as a value of the Command parameter. + ScriptBlock は、Command パラメーターの値としてのみ指定する必要があります。 - No value was specified for the Command parameter. + Command パラメーターに値が指定されていません。 - A value that is not valid ({6}) was specified for the {7} parameter. Valid values are Text and Xml. + {7} パラメーターに無効な値 ({6}) が指定されました。有効な値は Text と Xml です。 - No value was specified for the InputFormat parameter. Valid values are Text and Xml. + InputFormat パラメーターに値が指定されませんでした。有効な値は Text と Xml です。 - No value was specified for the OutputFormat parameter. Valid values are text and XML. + OutputFormat パラメーターに値が指定されませんでした。有効な値は Textと XML です。 - The {6} parameter requires a string value. + {6} パラメーターには文字列値が必要です。 - No value was specified for the Args parameter. + Args パラメーターに値が指定されていません。 - The {6} parameter was already specified. + {6} パラメーターは既に指定されています。 - Cannot process the XML from the '{0}' stream of '{1}': {2} + '{1}' の '{0}' ストリームから XML を処理できません: {2} \ No newline at end of file diff --git a/src/System.Management.Automation/resources/ja/RunspaceInit.ja.resx b/src/System.Management.Automation/resources/ja/RunspaceInit.ja.resx index acfb5605bb6..eb1ea88aed3 100644 --- a/src/System.Management.Automation/resources/ja/RunspaceInit.ja.resx +++ b/src/System.Management.Automation/resources/ja/RunspaceInit.ja.resx @@ -118,114 +118,114 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Variable to hold the enabled experimental feature names + 有効な試験的機能名を保持する変数 - Parent folder of the host application of the current runspace + 現在の実行空間のホスト アプリケーションの親フォルダー - Folder containing the current user's profile + 現在のユーザーのプロファイルを含むフォルダー - A reference to the host of the current runspace + 現在の実行空間のホストへの参照 - The run objects available to cmdlets + コマンドレットで使用できる実行オブジェクト - Version information for current PowerShell session + 現在の PowerShell セッションのバージョン情報 - Current process ID + 現在のプロセス ID - Status of last command + 最後のコマンドの状態 - Parent process ID + 親プロセス ID - The ShellID identifies the current shell. This is used by #Requires. + ShellID は現在のシェルを識別します。 これは、#Requires によって使用されます。 - Name of the current console file + 現在のコンソール ファイルの名前 - The text encoding used when piping text to a native executable file + ネイティブ実行可能ファイルにテキストをパイプ処理するときに使用されるテキスト エンコード - The text encoding used when reading output text from a native executable file + ネイティブ実行可能ファイルから出力テキストを読み取るときに使用されるテキスト エンコード - Configuration controlling how text is rendered. + テキストのレンダリング方法を制御する構成。 - Variable to contain the name of the email server. This can be used instead of the HostName parameter in the Send-MailMessage cmdlet. + メール サーバーの名前を格納する変数。これは、Send-MailMessage コマンドレットの HostName パラメーターの代わりに使用できます。 - Dictates when confirmation should be requested. Confirmation is requested when the ConfirmImpact of the operation is equal to or greater than $ConfirmPreference. If $ConfirmPreference is None, actions will only be confirmed when Confirm is specified. + 確認を要求するタイミングを指定します。操作の ConfirmImpact が $ConfirmPreference 以上の場合、確認が要求されます。$ConfirmPreferenceが None の場合、Confirm が指定されているときにのみアクションが確認されます。 - Dictates the action taken when a Debug message is delivered + デバッグ メッセージの配信時に実行されるアクションを指定します - Dictates the action taken when an error message is delivered + エラー メッセージが配信されたときに実行されるアクションを指定します - Dictates the action taken when progress records are delivered + 進行状況レコードの配信時に実行されるアクションを指定します - Dictates the action taken when a Verbose message is delivered + 詳細メッセージが配信されたときに実行されるアクションを指定します - Dictates the action taken when a Warning message is delivered + 警告メッセージが配信されたときに実行されるアクションを指定します - Dictates the action taken when a command generates an item in the Information stream + コマンドが Information ストリームに項目を生成するときに実行されるアクションを指定します - Dictates the view mode to use when displaying errors + エラーを表示するときに使用する表示モードを指定します - Dictates what type of prompt should be displayed for the current nesting level + 現在の入れ子レベルに対して表示するプロンプトの種類を指定します - If true, $ErrorActionPreference applies to native executables, so that non-zero exit codes will generate cmdlet-style errors governed by error action settings + true の場合、$ErrorActionPreference はネイティブ実行可能ファイルに適用されるため、ゼロ以外の終了コードによって、エラー アクション設定によって制御されるコマンドレット スタイルのエラーが生成されます - If true, WhatIf is considered to be enabled for all commands. + true の場合、WhatIf はすべてのコマンドで有効と見なされます。 - Dictates how arguments are passed to native executables. + ネイティブ実行可能ファイルに引数を渡す方法を指定します。 - Dictates the limit of enumeration on formatting IEnumerable objects + IEnumerable オブジェクトの書式設定に関する列挙の制限を指定します - Displays errors with a stack trace + スタック トレースでエラーを表示します - Displays errors with inner exceptions + 内部例外を含むエラーを表示します - Displays errors with their sources + エラーとそのソースを表示します - Displays errors with a description of the error class + エラー クラスの説明と共にエラーを表示します - Culture of the current PowerShell session + 現在の PowerShell セッションのカルチャ - UI culture of the current PowerShell session + 現在の PowerShell セッションの UI カルチャ - Variable to hold all default <cmdlet:parameter, value> pairs + すべての既定の <cmdlet:parameter、value> ペアを保持する変数 - Press Enter to continue... + 続行するには、Enter キーを押してください... - Edition information for the current PowerShell session + 現在の PowerShell セッションのエディション情報 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/pl/GetErrorText.pl.resx b/src/System.Management.Automation/resources/pl/GetErrorText.pl.resx index a4acd582337..2eb3b8d07e7 100644 --- a/src/System.Management.Automation/resources/pl/GetErrorText.pl.resx +++ b/src/System.Management.Automation/resources/pl/GetErrorText.pl.resx @@ -118,30 +118,30 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot load a resource with base name "{0}". + Nie można załadować zasobu o nazwie podstawowej „{0}”. - Cannot load a resource string with ID "{0}". + Nie można załadować ciągu zasobu o identyfikatorze „{0}”. - Running commands is prevented by Stop policy settings. + Uruchamianie poleceń jest blokowane przez ustawienia zasad zatrzymywania. - Cannot retrieve the message "{0}" "{1}" "{2}" because an assembly was not registered. + Nie można pobrać komunikatu „{0}” „{1}” „{2}”, ponieważ zestaw nie został zarejestrowany. - Cannot retrieve the message "{0}" "{1}" "{2}". A template string format is not valid in template string "{3}". + Nie można pobrać komunikatu „{0}” „{1}” „{2}”. Format ciągu szablonu jest nieprawidłowy w ciągu szablonu „{3}”. - Cannot retrieve the message "{0}" "{1}" "{2}". A template string exists, but its value is empty or blank. + Nie można pobrać komunikatu „{0}” „{1}” „{2}”. Ciąg szablonu istnieje, ale jego wartość jest pusta. - The pipeline has been stopped. + Potok został zatrzymany. - The script failed due to call depth overflow. + Wykonywanie skryptu nie powiodło się z powodu przepełnienia głębokości wywołania. - The pipeline failed due to call depth overflow. + Potok nie powiódł się z powodu przepełnienia głębokości wywołania. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/pl/InternalHostUserInterfaceStrings.pl.resx b/src/System.Management.Automation/resources/pl/InternalHostUserInterfaceStrings.pl.resx index 19396dacc2c..cf1d78531f2 100644 --- a/src/System.Management.Automation/resources/pl/InternalHostUserInterfaceStrings.pl.resx +++ b/src/System.Management.Automation/resources/pl/InternalHostUserInterfaceStrings.pl.resx @@ -118,106 +118,106 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - WriteDebug stopped because the value of the DebugPreference variable was 'Stop'. + Funkcja WriteDebug została zatrzymana, ponieważ wartość zmiennej DebugPreference to „Stop”. - The value {0} is not a supported ActionPreference value. + Wartość {0} nie jest obsługiwaną wartością ActionPreference. - The "{0}" parameter must contain at least one value. + Parametr „{0}” musi zawierać co najmniej jedną wartość. - &Yes + &Tak - Continue. + Kontynuuj. - Yes to &All + Tak w przypadku &Wszystko - Continue, and do not ask again whether to continue in this session. + Kontynuuj i nie pytaj ponownie, czy kontynuować w tej sesji. - &No + &Nie - End the operation with an error. + Zakończ operację z błędem. - No to A&ll + Nie w przypadku W&szystko - End the operation with an error. Do not request to resume operation for this session. + Zakończ operację z błędem. Nie żądaj wznowienia operacji dla tej sesji. - &Suspend + &Wstrzymaj - Pause the current operation and enter a command prompt. Type "exit" to resume the paused operation. + Wstrzymaj bieżącą operację i wprowadź wiersz polecenia. Wpisz „exit”, aby wznowić wstrzymane działanie. - Continue with this operation? + Kontynuować tę operację? - (default is "{0}") + (wartość domyślna to „{0}”) - (default choices are {0}) + (domyślne opcje to {0}) - Choice[{0}]: + Wybór[{0}]: - "{0}" should have at least one element. + Element „{0}” powinien mieć co najmniej jeden element. - "{0}" must be a valid index into "{1}". "{2}" is not a valid index. + „{0}” musi być prawidłowym indeksem w „{1}”. „{2}” nie jest prawidłowym indeksem. - Cannot process the hot key because a question mark ("?") cannot be used as a hot key. + Nie można przetworzyć klawisza skrótu, ponieważ znak zapytania ("?") nie może być użyty jako klawisz skrótu. - VERBOSE: {0} + PEŁNE INFORMACJE: {0} - WARNING: {0} + OSTRZEŻENIE: {0} - DEBUG: {0} + DEBUGOWANIE: {0} - The host is not currently transcribing. + Host obecnie nie prowadzi transkrypcji. - Command start time: {0} + Godzina rozpoczęcia polecenia: {0} ********************** -PowerShell transcript start -Start time: {0:yyyyMMddHHmmss} -Username: {1} -RunAs User: {2} -Configuration Name: {3} -Machine: {4} ({5}) -Host Application: {6} -Process ID: {7} +Początek transkrypcji programu PowerShell +Czas rozpoczęcia: {0:yyyyMMddHHmmss} +Nazwa użytkownika: {1} +Użytkownik RunAs: {2} +Nazwa konfiguracji: {3} +Maszyna: {4} ({5}) +Aplikacja hosta: {6} +Identyfikator procesu: {7} {8} ********************** ********************** -PowerShell transcript start -Start time: {0:yyyyMMddHHmmss} +Początek transkrypcji programu PowerShell +Czas rozpoczęcia: {0:yyyyMMddHHmmss} ********************** ********************** -PowerShell transcript end -End time: {0:yyyyMMddHHmmss} +Zakończenie transkrypcji programu PowerShell +Godzina zakończenia: {0:yyyyMMddHHmmss} ********************** - File path {0} resolves to a directory. + Ścieżka pliku {0} jest rozpoznawana jako katalog. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/pl/NativeCP.pl.resx b/src/System.Management.Automation/resources/pl/NativeCP.pl.resx index 0104024c3f5..f65e5dc1235 100644 --- a/src/System.Management.Automation/resources/pl/NativeCP.pl.resx +++ b/src/System.Management.Automation/resources/pl/NativeCP.pl.resx @@ -118,30 +118,30 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - ScriptBlock should only be specified as a value of the Command parameter. + Element ScriptBlock powinien być określony tylko jako wartość parametru Command. - No value was specified for the Command parameter. + Nie określono wartości dla parametru Command. - A value that is not valid ({6}) was specified for the {7} parameter. Valid values are Text and Xml. + Określono nieprawidłową wartość ({6}) dla parametru {7}. Prawidłowe wartości to Text i XML. - No value was specified for the InputFormat parameter. Valid values are Text and Xml. + Nie określono wartości parametru InputFormat. Prawidłowe wartości to Text i XML. - No value was specified for the OutputFormat parameter. Valid values are text and XML. + Nie określono wartości parametru OutputFormat. Prawidłowe wartości to Text i XML. - The {6} parameter requires a string value. + Parametr {6} wymaga wartości ciągu. - No value was specified for the Args parameter. + Nie określono wartości dla parametru Args. - The {6} parameter was already specified. + Parametr {6} został już określony. - Cannot process the XML from the '{0}' stream of '{1}': {2} + Nie można przetworzyć kodu XML ze strumienia „{0}” elementu „{1}”: {2} \ No newline at end of file diff --git a/src/System.Management.Automation/resources/pl/ParserStrings.pl.resx b/src/System.Management.Automation/resources/pl/ParserStrings.pl.resx index 8f9f9df0625..7a0ad66affd 100644 --- a/src/System.Management.Automation/resources/pl/ParserStrings.pl.resx +++ b/src/System.Management.Automation/resources/pl/ParserStrings.pl.resx @@ -118,1259 +118,1259 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Unable to find type [{0}]. + Nie można znaleźć typu [{0}]. - Unable to find type [{0}]. Details: {1} + Nie można znaleźć typu [{0}]. Szczegóły: {1} - Incomplete string token. + Niekompletny token ciągu. The Unicode escape sequence is not valid. A valid sequence is `u{ followed by one to six hex digits and a closing '}'. - The Unicode escape sequence value is out of range. The maximum value is 0x10FFFF. + Wartość sekwencji ucieczki Unicode jest spoza zakresu. Maksymalna wartość wynosi 0x10FFFF. - The Unicode escape sequence is missing the closing '}'. + W sekwencji ucieczki Unicode brakuje zamykającego znaku „}”. - The Unicode escape sequence contains more than the maximum of six hex digits between braces. + Sekwencja ucieczki Unicode zawiera więcej niż maksymalnie sześć cyfr szesnastkowych między nawiasami klamrowymi. - Cannot use [ref] with other types in a type constraint. + Nie można używać elementu [ref] z innymi typami w ograniczeniu typu. - [ref] can only be the final type in type conversion sequence. + Element [ref] może być tylko typem końcowym w sekwencji konwersji typów. - Cannot have two occurrences of [ref] in a type sequence. + W sekwencji typów nie mogą występować dwa wystąpienia [ref]. - The numeric constant {0} is not valid. + Stała liczbowa {0} jest nieprawidłowa. - The regular expression pattern {0} is not valid. + Wzorzec wyrażenia regularnego {0} jest nieprawidłowy. - An empty ${} variable reference was found. A name is required inside the braces. + Znaleziono puste odwołanie do zmiennej ${}. W nawiasach klamrowych musi znajdować się nazwa. - Variable reference is not valid. '$' was not followed by a valid variable name character. Consider using ${} to delimit the name. + Odwołanie do zmiennej jest nieprawidłowe. Znak „$” nie został poprzedzony prawidłowym znakiem nazwy zmiennej. Rozważ użycie parametru ${}, aby rozdzielić nazwę. - You cannot call a method on a null-valued expression. + Nie można wywołać metody w wyrażeniu o wartości null. - Method invocation failed because [{0}] does not contain a method named '{1}'. + Wywołanie metody zakończyło się niepowodzeniem, ponieważ element [{0}] nie zawiera metody o nazwie „{1}”. - Assignment failed because [{0}] does not contain a property '{1}()' that can be set. + Przypisanie zakończyło się niepowodzeniem, ponieważ element [{0}] nie zawiera właściwości „{1}()”, którą można ustawić. - Unexpected token '{0}' in expression or statement. + Nieoczekiwany token „{0}” w wyrażeniu lub instrukcji. - The splatting operator '@' cannot be used to reference variables in an expression. '@{0}' can be used only as an argument to a command. To reference variables in an expression use '${0}'. + Nie można użyć operatora splatting „@” do odwoływania się do zmiennych w wyrażeniu. „@{0}”. Można użyć tylko jako argumentu polecenia. Aby odwołać się do zmiennych w wyrażeniu, użyj „${0}”. - Parameter '{0}' is not valid + Parametr „{0}” jest nieprawidłowy - Missing expression after '{0}' in pipeline element. + Brak wyrażenia po „{0}” w elemencie potoku. - The expression after '{0}' in a pipeline element produced an object that was not valid. It must result in a command name, a script block, or a CommandInfo object. + Wyrażenie po „{0}” w elemencie potoku zwróciło nieprawidłowy obiekt. Musi ono zwracać nazwę polecenia, blok skryptu lub obiekt CommandInfo. - Parameter {0} requires an argument. + Parametr {0} wymaga argumentu. - Parameter {0} cannot have an argument. + Parametr {0} nie może mieć argumentu. - Duplicate parameter ${0} in parameter list. + Zduplikowany parametr ${0} na liście parametrów. - Missing argument in parameter list. + Brak argumentu na liście parametrów. - Splatted variables like '@{0}' cannot be part of a comma-separated list of arguments. + Zmienne rozciągnięte, takie jak „@{0}”, nie mogą być częścią listy argumentów rozdzielanej przecinkami. - Missing file specification after redirection operator. + Brakuje specyfikacji pliku po operatorze przekierowania. - The '{0}' operator is reserved for future use. + Operator „{0}” jest zarezerwowany do przyszłego użycia. - Redirection to '{0}' failed: {1} + Przekierowanie do elementu „{0}” zakończyło się niepowodzeniem: {1} - Expressions are only allowed as the first element of a pipeline. + Wyrażenia są dozwolone tylko jako pierwszy element potoku. - An empty pipe element is not allowed. + Pusty element potoku jest niedozwolony. - The assignment expression is not valid. The input to an assignment operator must be an object that is able to accept assignments, such as a variable or a property. + Wyrażenie przypisania jest nieprawidłowe. Dane wejściowe operatora przypisania muszą być obiektem, któremu można przypisać wartość, na przykład zmienną lub właściwością. - A hash table can only be added to another hash table. + Do innej tablicy skrótów można dodać tylko tablicę skrótów. - The right operand of '-is' must be a type. + Prawy operand operatora „-is” musi być typem. - The right operand of '-as' must be a type. + Prawy operand operatora „-as” musi być typem. - Error formatting a string: {0}. + Błąd formatowania ciągu: {0}. - The argument to operator '{0}' is not valid: {1}. + Argument operatora „{0}” jest nieprawidłowy: {1}. - The '{0}' operator failed: {1}. + Operator „{0}” zakończył się niepowodzeniem: {1}. - The {0} operator allows only two elements to follow it, not {1}. + Operator {0} pozwala na występowanie tylko dwóch elementów po sobie, a nie Y {1}. - You must provide a value expression following the '{0}' operator. + Musisz podać wyrażenie wartości po operatorze „{0}”. - The '{0}' operator works only on variables or on properties. + Operator „{0}” działa tylko na zmiennych lub właściwościach. - The {0} attribute can be specified only on a hash literal node. + Atrybut {0} można określić tylko w węźle literału skrótu. - Array index expression is missing or not valid. + Brak wyrażenia indeksu tablicy lub jest ono nieprawidłowe. - Missing property name after reference operator. + Brak nazwy właściwości po operatorze odwołania. - The property '{0}' cannot be found on this object. Verify that the property exists and can be set. + Nie można odnaleźć właściwości „{0}” w tym obiekcie. Sprawdź, czy właściwość istnieje i można ją ustawić. - The property '{0}' cannot be found on this object. Verify that the property exists. + Nie można odnaleźć właściwości „{0}” w tym obiekcie. Sprawdź, czy właściwość istnieje. - Index operation failed; the array index evaluated to null. + Operacja indeksowania zakończyła się niepowodzeniem. Indeks tablicy został obliczony jako wartość null. - Cannot index into a null array. + Nie można indeksować tablicy o wartości null. - Unable to index into an object of type "{0}". + Nie można indeksować obiektu typu „{0}”. - Unable to index into an object of type "{0}" with the ByRef-like return type "{1}". ByRef-like types are not supported in PowerShell. + Nie można indeksować obiektu typu „{0}” z typem zwracanym typu ByRef „{1}”. Typy podobne do ByRef nie są obsługiwane w programie PowerShell. - The array has too many dimensions: {0}. The number of dimensions for an array must be less than or equal to 32. + Tablica ma zbyt wiele wymiarów: {0}. Liczba wymiarów tablicy musi być mniejsza lub równa 32. - Array assignment to [{0}] failed because assignment to slices is not supported. + Przypisanie tablicy do [{0}] zakończyło się niepowodzeniem, ponieważ przypisywanie do fragmentów nie jest obsługiwane. - You cannot index into a {0} dimensional array with index [{1}]. + Nie można odwołać się do elementu tablicy {0} wymiarowej przy użyciu indeksu [{1}]. - Array assignment failed because index '{0}' was out of range. + Przypisanie tablicy zakończyło się niepowodzeniem, ponieważ indeks „{0}” był poza zakresem. - Missing expression after '{0}'. + Brak wyrażenia po elemencie „{0}”. - ${{variable}} reference starting is missing the closing '}}'. + W odwołaniu rozpoczynającym się od ${{variable}} brakuje zamykającego ciągu „}}”. - $(subexpression) is missing the closing ')'. + W elemencie $(subexpression) brakuje zamykającego znaku „)”. - Internal error - unexpected unary operator {0}. + Błąd wewnętrzny — nieoczekiwany operator jednoargumentowy {0}. - [ref] cannot be applied to a variable that does not exist. + Nie można zastosować [ref] do zmiennej, która nie istnieje. - The variable '${0}' cannot be retrieved because it has not been set. + Nie można pobrać zmiennej „${0}”, ponieważ nie została ustawiona. - Duplicate keys '{0}' are not allowed in hash literals. + Zduplikowane klucze „{0}” nie są dozwolone w literałach tablicy skrótów. - Duplicate named arguments '{0}' are not allowed. + Niedozwolone są zduplikowane nazwane argumenty „{0}”. - The '{0}' operator works only on numbers. The operand is a '{1}'. + Operator „{0}” działa tylko na liczbach. Operand ma typ „{1}”. - An expression was expected after '('. + Oczekiwano wyrażenia po znaku „(”. - Missing '=' operator after key in hash literal. + Brak operatora „=” po kluczu w literale skrótu. - Missing statement after '=' in hash literal. + Brak instrukcji po znaku „=” w literale skrótu. - Missing statement after '=' in named argument. + Brak instrukcji po znaku „=” w nazwanym argumencie. - Missing ';' or end-of-line in property definition. + Brak znaku „ ” lub końca wiersza w definicji właściwości. - Missing expression after unary operator '{0}'. + Brak wyrażenia po operatorze jednoargumentowym „{0}”. - Missing condition in if statement after '{0} ('. + Brak warunku w instrukcji if po elemencie „{0} (”. - Missing statement block after {0} ( condition ). + Brak bloku instrukcji po elemencie {0} (warunek). - Missing statement block after 'else' keyword. + Brak bloku instrukcji po słowie kluczowym „else”. - The file could not be read: {0}. + Nie można odczytać pliku: {0}. - The current provider ({0}) cannot open a file. + Bieżący dostawca ({0}) nie może otworzyć pliku. - No files matching '{0}' were found. + Nie znaleziono plików zgodnych z elementem „{0}”. - The path cannot be processed because it resolved to more than one file; only one file at a time can be processed. + Nie można przetworzyć ścieżki, ponieważ prowadzi do więcej niż jednego pliku. Jednocześnie można przetwarzać tylko jeden plik. - The {0} '-{1}' parameter is reserved for future use. + Parametr {0} „-{1}” jest zarezerwowany do wykorzystania w przyszłości. - Cannot process the 'switch' statement because of a missing file name argument to the -file option. + Nie można przetworzyć instrukcji „Switch”, ponieważ w opcji -file brakuje argumentu z nazwą pliku. - The file name argument to -file in the switch statement is not valid. + Argument nazwy pliku dla opcji -file w instrukcji Switch jest nieprawidłowy. - The parameter {0} is not valid for the switch statement. + Parametr {0} jest nieprawidłowy dla instrukcji Switch. - The parameter {0} is not valid for the foreach statement. + Parametr {0} nie jest prawidłowy dla instrukcji ForEach. - A switch statement must have one of the following: '-file file_name' or '( expression )'. + Instrukcja Switch musi zawierać jedną z tych opcji: „-file file_name” lub „( wyrażenie )”. - Missing condition in switch statement clause. + Brak warunku w klauzuli instrukcji Switch. - A switch statement can have only one default clause. + Instrukcja Switch może mieć tylko jedną klauzulę domyślną. - Missing statement block in switch statement clause. + Brakuje bloku instrukcji w klauzuli instrukcji Switch. - Missing expression in foreach loop. -The correct form is: foreach ($a in $b) {...} + Brak wyrażenia w pętli ForEach. +Poprawna forma to: ForEach ($a in $b) {...} - Missing statement body in foreach loop. -The correct form is: foreach ($a in $b) {...} + Brak treści instrukcji w pętli ForEach. +Poprawna forma to: ForEach ($a in $b) {...} - The param statement cannot be used if arguments were specified in the function declaration. + Nie można użyć instrukcji param, jeśli w deklaracji funkcji podano argumenty. - The operation '[{0}] {1} [{2}]' is not defined. + Operacja „[{0}] {1} [{2}]” nie jest zdefiniowana. - An error occurred while enumerating through a collection: {0}. + Wystąpił błąd podczas wyliczania elementów kolekcji: {0}. - An unhandled COM interop exception occurred: {0} + Wystąpił nieobsługiwany wyjątek COM interop: {0} - A COM object was accessed after it was already released: {0} + Uzyskano dostęp do obiektu COM po jego zwolnieniu: {0} - Processing was stopped because the script is too complex. + Przetwarzanie zostało zatrzymane, ponieważ skrypt jest zbyt złożony. - The syntax is not supported by this runspace. This can occur if the runspace is in no-language mode. + Składnia nie jest obsługiwana przez ten obszar działania. Może się tak zdarzyć, jeśli obszar działania jest w trybie bez języka. - The combination of options with the -split operator is not valid. + Kombinacja opcji z operatorem -split jest nieprawidłowa. - Options are not allowed on the -split operator with a predicate. + Opcje nie są dozwolone w operatorze -split z predykatem. - The token '{0}' is not a valid statement separator in this version. + Token „{0}” nie jest prawidłowym separatorem instrukcji w tej wersji. - The '{0}' keyword is not supported in this version of the language. + Słowo kluczowe „{0}” nie jest obsługiwane w tej wersji języka. - Missing expression after '{0}' in loop. + Brak wyrażenia po elemencie „{0}” w pętli. - Missing statement body in {0} loop. + Brak treści instrukcji w pętli {0}. - The 'trap' statement was incomplete. A trap statement requires a body. + Instrukcja „trap” była niekompletna. Instrukcja trap wymaga treści. - Incomplete 'try' statement. A try statement requires a body. + Niekompletna instrukcja „Try”. Instrukcja Try wymaga treści. - Parameter declarations are a comma-separated list of variable names with optional initializer expressions. + Deklaracje parametrów to lista nazw zmiennych rozdzielona przecinkami z opcjonalnymi wyrażeniami inicjującymi. - Missing function body in function declaration. + Brak treści funkcji w deklaracji funkcji. - Script command clause '{0}' has already been defined. + Klauzula polecenia skryptu „{0}” została już zdefiniowana. - unexpected token '{0}', expected 'begin', 'process', 'end', 'clean', or 'dynamicparam'. + Nieoczekiwany token „{0}”, oczekiwano „begin”, „process”, „end”, „clean” lub „dynamicparam”. - Missing closing '}' in statement block or type definition. + Brak zamykającego znaku „}” w bloku instrukcji lub definicji typu. - Missing ')' in method call. + Brak znaku „)” w wywołaniu metody. - Missing ']' after array index expression. + Brak znaku „]” po wyrażeniu indeksu tablicy. - Missing closing ')' in expression. + Brak zamykającego znaku „)” w wyrażeniu. - Missing closing ')' in subexpression. + Brak zamykającego znaku „)” w podwyrażeniu. - Missing '(' after '{0}' in if statement. + Brak znaku „(” po elemecie „{0}” w instrukcji if. - Missing ')' after expression in switch statement. + Brak znaku „)” po wyrażeniu w poleceniu Switch. - Missing '{' in switch statement. + Brak znaku „{” w instrukcji Switch. - Missing variable name after foreach. -The correct form is: foreach ($a in $b) {...} + Brak nazwy zmiennej po elemencie ForEach. +Poprawna forma to: ForEach ($a in $b) {...} - Missing 'in' after variable in foreach loop. -The correct form is: foreach ($a in $b) {...} + Brakuje słowa „in” po zmiennej w pętli ForEach. +Poprawna forma to: ForEach ($a in $b) {...} - Missing closing ')' after expression part of foreach loop. -The correct form is: foreach ($a in $b) {...} + Brakuje zamykającego znaku „)” po części wyrażenia pętli ForEach. +Poprawna forma to: ForEach ($a in $b) {...} - Missing opening '(' after keyword '{0}'. + Brak otwierającego znaku „(” po słowie kluczowym „{0}”. - Missing while or until keyword in do loop. + Brak słowa kluczowego While lub Until w pętli do. - Missing closing ')' after expression in '{0}' statement. + Brakuje zamykającego znaku „)” po wyrażeniu w instrukcji „{0}”. - Missing name after {0} keyword. + Brak nazwy po słowie kluczowym {0}. - Missing ')' in function parameter list. + Brak znaku „)” na liście parametrów funkcji. - An error '{0}' occurred while processing this script. Text describing this error could not be loaded. + Podczas przetwarzania skryptu wystąpił błąd „{0}”. Nie można było załadować tekstu opisującego ten błąd. - An error '{0}' occurred while processing this script. Text describing this error could not be loaded due to error '{1}'. + Podczas przetwarzania skryptu wystąpił błąd „{0}”. Nie można było załadować tekstu opisującego ten błąd. Błąd „{1}”. - There is no Runspace available to run scripts in this thread. You can provide one in the DefaultRunspace property of the System.Management.Automation.Runspaces.Runspace type. The script block you attempted to invoke was: {0} + W tym wątku nie ma dostępnej przestrzeni roboczej umożliwiającej uruchamianie skryptów. Można podać tę opcję we właściwości DefaultRunspace typu System.Management.Automation.Runspaces.Runspace. Blok skryptu, który próbowano wywołać, to: {0} - Unrecognized token in source text. + Nierozpoznany token w tekście źródłowym. - Action to take for this exception: + Akcja do wykonania dla tego wyjątku: - &Continue + &Kontynuuj - Report the error then continue with the next script statement. + Zgłoś błąd, a potem przejdź do następnej instrukcji skryptu. - S&ilently Continue + K&ontynuuj bez przerywania - Do not report this error, just continue with the next script statement. + Nie zgłaszaj tego błędu, po prostu przejdź do następnej instrukcji skryptu. - &Break + &Przerwij - Do not continue processing, throw the exception instead. + Nie kontynuuj przetwarzania, tylko zgłoś wyjątek. - &Suspend + &Wstrzymaj - Pause the current pipeline and return to the command prompt. Type exit to resume operation when you are done. + Wstrzymaj bieżący potok i wróć do wiersza polecenia. Gdy skończysz, wpisz Zakończ, aby wznowić działanie. - Cannot run a document in the middle of a pipeline: {0}. + Nie można uruchomić dokumentu w środku potoku: {0}. - Program '{0}' failed to run: {1}{2}. + Nie można uruchomić programu „{0}”: {1}{2}. - Cannot use '&' to invoke in the context of binary module '{0}'. Specify a non-binary module after the '&' and try the operation again. + Nie można użyć operatora „&” do wywołania w kontekście modułu binarnego „{0}”. Określ po operatorze „&” moduł inny niż binarny i spróbuj ponownie. - Cannot use '&' to invoke in the context of module '{0}' because it is not imported. Import the module '{0}' and try the operation again. + Nie można użyć operatora „&” do wywołania w kontekście modułu „{0}”, ponieważ nie został zaimportowany. Zaimportuj moduł „{0}” i spróbuj ponownie. - Executable script code found in signature block. + W bloku podpisu znaleziono wykonywalny kod skryptu. - line + wiersz - At {0}:{1} char:{2} + W elemencie {0}:{1} znak:{2} + {3} {0,4}+ {1} - ! SET ${0} = '{1}'. + ! USTAW ${0} = „{1}”. - ! CALL function '{0}' + ! Funkcja WYWOŁAJ „{0}” - ! CALL function '{0}' (defined in file '{1}') + ! Wywołanie funkcji „{0}” (zdefiniowanej w pliku „{1}”) - ! CALL method '{0}' + ! Metoda WYWOŁAJ „{0}” - The string is missing the terminator: {0}. + W ciągu brakuje końcówki: {0}. - White space is not allowed before the string terminator. + Znak odstępu nie jest dozwolony przed zakończeniem ciągu. - Missing ] at end of type token. + Brak znaku ] na końcu tokenu typu. - Use `{ instead of { in variable names. + Użyj znaku { zamiast { w nazwach zmiennych. - The Data section is missing its statement block. + Sekcja danych nie ma bloku instrukcji. - The "{0}" parameter of the Data section is not valid. The valid Data section parameter is SupportedCommand. + Parametr „{0}” sekcji danych jest nieprawidłowy. Prawidłowym parametrem sekcji danych jest SupportedCommand. - Array references are not allowed in restricted language mode or a Data section. + Odwołania do tablic nie są dozwolone w trybie języka z ograniczeniami ani w sekcji danych. - Assignment statements are not allowed in restricted language mode or a Data section. + Instrukcje przypisania nie są dozwolone w trybie języka z ograniczeniami ani w sekcji danych. - Redirection is not allowed in restricted language mode or a Data section. + Przekierowanie nie jest dozwolone w trybie języka z ograniczeniami ani w sekcji danych. - The Do and While statements are not allowed in restricted language mode or a Data section. + Instrukcje Do i While nie są dozwolone w trybie języka z ograniczeniami ani w sekcji danych. - Expandable strings are not allowed in restricted language mode or a Data section. + Ciągi rozszerzalne nie są dozwolone w trybie języka z ograniczeniami ani w sekcji danych. - The '{0}' operator is not allowed in restricted language mode or a Data section. + Operator „{0}” nie jest dozwolony w trybie języka z ograniczeniami ani w sekcji danych. - The Trap statement is not allowed in restricted language mode or a Data section. + Instrukcja Trap nie jest dozwolona w trybie języka z ograniczeniami ani w sekcji danych. - The Try statement is not allowed in restricted language mode or a Data section. + Instrukcja Try nie jest dozwolona w trybie języka z ograniczeniami ani w sekcji danych. - Flow control statements such as Break, Continue, Return, Exit, and Throw are not allowed in restricted language mode or a Data section. + Instrukcje sterowania przepływem, takie jak Break, Continue, Return, Exit i Throw, są niedozwolone w trybie języka z ograniczeniami ani w sekcji danych. - Foreach statements are not allowed in restricted language mode or a Data section. + Polecenia ForEach nie są dozwolone w trybie języka z ograniczeniami ani w sekcji danych. - For and While statements are not allowed in restricted language mode or a Data section. + Instrukcje For i While nie są dozwolone w trybie języka z ograniczeniami ani w sekcji danych. - Function declarations are not allowed in restricted language mode or a Data section. + Deklaracje funkcji nie są dozwolone w trybie języka z ograniczeniami ani w sekcji danych. - Method calls are not allowed in restricted language mode or a Data section. + Wywołania metod nie są dozwolone w trybie języka z ograniczeniami ani w sekcji danych. - Parameter declarations are not allowed in restricted language mode or a Data section. + Deklaracje parametrów nie są dozwolone w trybie języka z ograniczeniami ani w sekcji danych. - Property references are not allowed in restricted language mode or a Data section. + Odwołania do właściwości nie są dozwolone w trybie języka z ograniczeniami ani w sekcji danych. - Script block literals are not allowed in restricted language mode or a Data section. + Bloki skryptu nie są dozwolone w trybie języka z ograniczeniami ani w sekcji danych. - The switch statement is not allowed in restricted language mode or a Data section. + Instrukcja Switch nie jest dozwolona w trybie języka z ograniczeniami ani w sekcji danych. - A variable that cannot be referenced in restricted language mode or a Data section is being referenced. Variables that can be referenced include the following: {0}. + Odwołujesz się do zmiennej, do której nie można się odwoływać w trybie ograniczonego języka lub w sekcji danych. Zmienne, do których można się odwoływać, obejmują następujące elementy: {0}. - The command '{0}' is not allowed in restricted language mode or a Data section. + Polecenie „{0}” nie jest dozwolone w trybie języka z ograniczeniami ani w sekcji danych. - The data statement is not allowed in restricted language mode or another Data section. + Instrukcja danych nie jest dozwolona w trybie języka z ograniczeniami ani w innej sekcji danych. - The SupportedCommand parameter of the Data section is missing a value. Supply a cmdlet or function name to the parameter. + Brak wartości parametru SupportedCommand w sekcji danych. Podaj do tego parametru nazwę polecenia cmdlet lub funkcji. - A Begin statement block, Process statement block, or parameter statement is not allowed in a Data section. + Blok instrukcji Begin, blok instrukcji Process lub instrukcja parametru nie są dozwolone w sekcji danych. - String multiplication results with more than "{0}" characters are not allowed in restricted language mode or a Data section. + Wyniki mnożenia ciągów zawierające większą liczbę znaków niż „{0}” są niedozwolone w trybie ograniczonego języka lub w sekcji danych. - Array multiplication resulting in more than {0} elements is not allowed in restricted language mode or a Data section. + Mnożenie tablicy, które daje więcej niż liczba elementów {0}, jest niedozwolone w trybie języka z ograniczeniami ani w sekcji danych. - Dot sourcing is not allowed in restricted language mode or a Data section. + Pozyskiwanie danych za pomocą kodu źródłowego nie jest dozwolone w trybie języka z ograniczeniami ani w sekcji danych. - Attribute argument must be a constant or a script block. + Argument atrybutu musi być stałą albo blokiem skryptu. - Cannot find the type for custom attribute '{0}'. Make sure that the assembly that contains this type is loaded. + Nie można odnaleźć typu dla atrybutu niestandardowego „{0}”. Upewnij się, że zestaw zawierający ten typ jest załadowany. - Property '{0}' cannot be found for type '{1}'. + Nie można odnaleźć właściwości „{0}” dla typu „{1}”. - Unexpected attribute '{0}'. + Nieoczekiwany atrybut „{0}”. - Missing ] at end of attribute or type literal. + Brak znaku ] na końcu atrybutu lub literału typu. - The function or command was called as if it were a method. Parameters should be separated by spaces. For information about parameters, see the about_Parameters Help topic. + Funkcja lub polecenie zostały wywołane tak, jakby były metodą. Parametry powinny być rozdzielone spacjami. Aby uzyskać informacje o parametrach, zobacz temat pomocy about_Parameters. - The Try statement is missing its statement block. + Instrukcja Try nie ma bloku instrukcji. - The Try statement is missing its Catch or Finally block. + Instrukcja Try nie ma bloku Catch ani Finally. - The Catch block is missing its statement block. + W bloku Catch brakuje bloku instrukcji. - The Finally block is missing its statement block. + W bloku Finally brakuje bloku instrukcji. - Exception type {0} is already handled by a previous handler. + Typ wyjątku {0} jest już obsługiwany przez poprzednią procedurę obsługi. - Catch block must be the last catch block. + Blok Catch musi być ostatnim blokiem Catch. - Missing type literal. + Brak literału typu. - The terminator '#>' is missing from the multiline comment. + Brakuje terminatora „#>” w komentarzu wielowierszowym. - No characters are allowed after a here-string header but before the end of the line. + Po nagłówku here-string, ale przed końcem wiersza, nie mogą znajdować się żadne znaki. - Parser errors were detected. + Wykryto błędy parsera. - Missing statement block after '{0}'. + Brak bloku instrukcji po „{0}”. - Unexpected type [{0}] was found in the parameter statement. + W instrukcji parametru znaleziono nieoczekiwany typ [{0}]. - Unexpected type [{0}] was found before statement. + Przed instrukcją znaleziono nieoczekiwany typ [{0}]. - A null key is not allowed in a hash literal. + Klucz o wartości null jest niedozwolony w literale skrótu. - Attributes are not allowed in restricted language mode or a Data section. + Atrybuty nie są dozwolone w trybie języka z ograniczeniami ani w sekcji danych. - The type {0} is not allowed in restricted language mode or a Data section. + Typ {0} nie jest dozwolony w trybie języka z ograniczeniami ani w sekcji danych. - '{0}' is a ReadOnly property. + Element „{0}” to właściwość ReadOnly. - The type name is missing the assembly name specification. + W nazwie typu brakuje określenia nazwy zestawu. - Flow of control cannot leave a Finally block. + Przepływ sterowania nie może opuścić bloku „Finally”. - Unrecoverable error in PowerShell. + Błąd krytyczny w programie PowerShell. - An AST cannot be used as the child of more than one AST. To use this AST in another AST, call the Copy() method and use its result. + Nie można użyć struktury AST jako elementu podrzędnego więcej niż dla jednej struktury AST. Aby użyć tej struktury AST w innej strukturze AST, wywołaj metodę Copy() i użyj jej wyniku. - Expression is not allowed in a Using expression. + Wyrażenie jest niedozwolone w wyrażeniu Using. - A Using variable cannot be retrieved. A Using variable can be used only with Invoke-Command, Start-Job, or InlineScript in the script workflow. When it is used with Invoke-Command, the Using variable is valid only if the script block is invoked on a remote computer. + Nie można pobrać zmiennej Using. Zmiennej Using można używać tylko z poleceniami Invoke-Command, Start-Job lub InlineScript w przepływie pracy skryptu. Gdy używasz jej z poleceniem Invoke-Command, zmienna Using jest prawidłowa tylko wtedy, gdy blok skryptu jest wywoływany na komputerze zdalnym. - Variable reference is not valid. The variable name is missing. + Odwołanie do zmiennej jest nieprawidłowe. Brak nazwy zmiennej. - Variable reference is not valid. ':' was not followed by a valid variable name character. Consider using ${} to delimit the name. + Odwołanie do zmiennej jest nieprawidłowe. Po znaku „:” nie występuje prawidłowy znak nazwy zmiennej. Rozważ użycie parametru ${}, aby rozdzielić nazwę. - Not all parse errors were reported. Correct the reported errors and try again. + Nie wszystkie błędy analizy zostały zgłoszone. Popraw zgłoszone błędy i spróbuj ponownie. - Missing type name after '['. + Brak nazwy typu po znaku „[”. - * stream + * strumień - debug stream + strumień debugowania - error stream + strumień błędów - output stream + strumień wyjściowy - The {0} for this command is already redirected. + Element {0} dla tego polecenia jest już przekierowany. - verbose stream + pełny strumień - warning stream + strumień ostrzegawczy - Missing statement body after keyword '{0}'. + Brak treści instrukcji po słowie kluczowym „{0}”. - Parallel and sequence blocks are not allowed in restricted language mode or a Data section. + Bloki równoległe i sekwencyjne są niedozwolone w trybie ograniczonego języka lub w sekcji danych. - Unexpected keyword '{0}'. + Nieoczekiwane słowo kluczowe „{0}”. - [void] cannot be used as a parameter type, or on the left side of an assignment. + Element [nieważny] nie może być używany jako typ parametru ani po lewej stronie przypisania. - The method cannot be invoked. + Metody nie można wywoływać. - Cannot convert hashtable to an object of the following type: {0}. Hashtable-to-Object conversion is not supported in restricted language mode or a Data section. + Nie można przekonwertować tablicy skrótów na obiekt następującego typu: {0}. Konwersja tablicy skrótów na obiekt nie jest obsługiwana w trybie języka z ograniczeniami ani w sekcji danych. - Argument must be constant. + Argument musi być stały. - The argument for the {0} parameter is not valid. Specify a valid string argument. + Argument dla parametru {0} jest nieprawidłowy. Podaj prawidłowy argument tekstowy. - The argument for the Module parameter is not valid. {0} + Argument dla parametru modułu jest nieprawidłowy. {0} - The argument for the Version parameter is not valid. Specify a valid PowerShell version, in the format major.minor version. + Argument dla parametru wersji jest nieprawidłowy. Określ prawidłową wersję programu PowerShell w formacie major.minor. - The argument for the {0} parameter is not valid. Specify a valid PowerShell edition. + Argument dla parametru {0} jest nieprawidłowy. Określ prawidłową wersję programu PowerShell. - The argument for the {0} parameter contains duplicate values. Do not specify duplicate PowerShell edition values. + Argument parametru {0} zawiera zduplikowane wartości. Nie określaj zduplikowanych wartości wersji programu PowerShell. - Wildcard characters are not supported for module names. + Symbole wieloznaczne nie są obsługiwane w nazwach modułów. - Cannot invoke method. Method invocation is supported only on core types in this language mode. + Nie można wywołać metody. Wywołanie metody jest obsługiwane tylko w przypadku typów podstawowych w tym trybie języka. - Cannot set property. Property setting is supported only on core types in this language mode. + Nie można ustawić właściwości. W tym trybie językowym ustawienia właściwości są obsługiwane tylko w typach podstawowych. - An attribute name for resource '{0}' was found that is not valid. An attribute name must be a simple string, and cannot contain variables or expressions. Replace '{1}' with a simple string. + Znaleziono nieprawidłową nazwę atrybutu dla zasobu „{0}”. Nazwa atrybutu musi być prostym ciągiem znaków i nie może zawierać zmiennych ani wyrażeń. Zastąp element „{1}” prostym ciągiem znaków. - The member '{0}' is not valid. Valid members are -'{1}'. + Element „{0}” jest nieprawidłowy. Prawidłowe elementy to +„{1}”. - Missing '{' in object definition. + Brak znaku „{” w definicji obiektu. - A required name or expression was missing. + Brak wymaganej nazwy lub wyrażenia. - The schema file {0} was not found. Verify that any modules specified in a configuration statement contain a schema.mof file, and then try running the script again. + Nie znaleziono pliku schematu {0}. Sprawdź, czy wszystkie moduły określone w instrukcji konfiguracji zawierają plik schema.mof, a następnie spróbuj uruchomić skrypt ponownie. - Cannot define data section. Definition of additional supported commands is not supported in this language mode. + Nie można zdefiniować sekcji danych. W tym trybie języka nie jest obsługiwana definicja dodatkowych obsługiwanych poleceń. - Missing '{' in configuration statement. + Brak znaku „{” w instrukcji konfiguracji. - Exception parsing MOF file '{0}':{1}. + Wyjątek podczas analizowania pliku MOF „{0}”:{1}. - The name for the configuration is missing. Provide the missing name as a simple name, string, or string-valued expression. + Brakuje nazwy konfiguracji. Podaj brakującą nazwę jako prostą nazwę, ciąg lub wyrażenie zwracające ciąg. - Could not find the module '{0}'. + Nie można odnaleźć modułu „{0}”. - Multiple versions of the module '{0}' were found. You can run 'Get-Module -ListAvailable -FullyQualifiedName {0}' to see available versions on the system, and then use the fully qualified name '@{{ModuleName="{0}"; RequiredVersion="Version"}}'. + Znaleziono wiele wersji modułu „{0}”. Możesz uruchomić polecenie „Get-Module -ListAvailable -FullyQualifiedName {0}”, aby zobaczyć dostępne wersje w systemie, a następnie użyć w pełni kwalifikowanej nazwy „@{{ModuleName="{0}"; RequiredVersion="Version"}}”. - The ThrottleLimit parameter of the foreach statement is missing a value. Supply a throttle limit to the parameter. + Brak wartości parametru ThrottleLimit instrukcji ForEach. Podaj limit przepustowości dla tego parametru. 'ThrottleLimit' must not be localized. - The ThrottleLimit parameter is only supported on foreach statements that use the Parallel parameter. + Parametr ThrottleLimit jest obsługiwany tylko w instrukcjach ForEach, które używają parametru Parallel. 'ThrottleLimit' and 'Parallel' must not be localized. - The configuration block results were null or empty. Verify that configurations were defined in the block. + Wyniki bloku konfiguracji mają wartość null lub są puste. Sprawdź, czy w bloku zdefiniowano konfiguracje. - The '{0}' resource can only be used once per configuration, and therefore cannot have a name. Remove '{1}', and then run the script again. + Zasobu „{0}” można użyć tylko raz w danej konfiguracji, więc nie może mieć nazwy. Usuń element „{1}”, a następnie uruchom skrypt ponownie. - There is an incomplete property assignment block in the instance definition. + W definicji wystąpienia znajduje się niekompletny blok przypisania właściwości. - Missing '=' operator after key in property assignment. + Brakuje operatora „=” po kluczu w przypisaniu właściwości. - Duplicate property assignments are not allowed in an instance definition. + Zduplikowane przypisania właściwości nie są dozwolone w definicji wystąpienia. - A second CIM class definition for '{0}' was found while processing the schema file '{1}'. This class was already defined in the file(s) '{2}'. Remove the redundant definition, and then try again. + Podczas przetwarzania pliku schematu „{0}” znaleziono drugą definicję klasy modelu CIM dla „{1}”. Ta klasa została już zdefiniowana w plikach „{2}”. Usuń zbędną definicję i spróbuj ponownie. - Resource name '{0}' is already being used by another Resource or Configuration. + Nazwa zasobu „{0}” jest już używana przez inny zasób lub konfigurację. - The class name '{0}' does not match '{1}', the name of the file in which it is defined. Rename either the file name to match the class name or vice versa + Nazwa klasy „{0}” nie zgadza się z nazwą pliku „{1}”, w którym jest zdefiniowana. Zmień nazwę pliku tak, aby pasowała do nazwy klasy, albo odwrotnie - A duplicate resource identifier '{0}' was found while processing the specification for node '{1}'. Change the name of this resource so that it is unique within the node specification. + Podczas przetwarzania specyfikacji dla węzła „{0}” znaleziono zduplikowany identyfikator zasobu „{1}”. Zmień nazwę tego zasobu, aby była unikatowa w obrębie specyfikacji węzła. - There is no whitespace between the name and the scriptblock in dynamic keyword '{0}' body statement. + W dynamicznej instrukcji „{0}” w treści słowa kluczowego nie ma odstępu między nazwą a blokiem skryptu. - The key property for an entry in the dictionary of functions to define cannot be empty because the key property is used as the function name. Specify a non-empty string as the value of the key property, and then try the operation again. + Właściwość klucza dla wpisu w słowniku funkcji do zdefiniowania nie może być pusta, ponieważ właściwość klucza jest używana jako nazwa funkcji. Podaj niepusty ciąg jako wartość właściwości klucza, a następnie spróbuj ponownie wykonać operację. The format of the resource reference '{0}' in the Requires list for resource '{1}' is not valid. A required resource name should be in the format '[<typename>]<name>', with alphanumeric characters, spaces, '_', '-', '.' and '\'. The capitalized word Requires should not be localized. The words <typename> and <name> should be localized but the <> characters must be preserved. - The format of the resource reference '{0}' in the exclusive list for resource '{1}' is not valid. An exclusive resource name should be in the format '<typename>\<name>', with no spaces. + Format odwołania do zasobu „{0}” na liście wyłącznej dla zasobu „{1}” jest nieprawidłowy. Nazwa zasobu wyłącznego powinna mieć format „<typename>\<name>” bez spacji. - The PartialConfiguration '{0}' is set to pull mode which requires a ConfigurationSource property. + Element PartialConfiguration „{0}” jest ustawiony w trybie Pull, który wymaga właściwości ConfigurationSource. - A null entry was found in the list of variable entries to create in the script block scope. Remove the entry at index {0}, or replace it with a non-null entry, and then try again. + Na liście wpisów zmiennych do utworzenia w zakresie bloku skryptu znaleziono wpis o wartości null. Usuń wpis pod indeksem {0} lub zastąp go wpisem innym niż wartość null, a potem spróbuj ponownie. - The script block that defines function '{0}' cannot be null or empty. Provide a non-empty script block in the function definition dictionary, and then try the operation again. + Blok skryptu, który definiuje funkcję „{0}”, nie może mieć wartości null ani być pusty. Podaj niepusty blok skryptu w słowniku definicji funkcji, a potem spróbuj ponownie wykonać operację. - The syntax of the Import-DscResource dynamic keyword is: + Składnia dynamicznego słowa kluczowego Import-DscResource jest następująca: Import-DscResource [-Name <ResourceName(s)>] [-ModuleName <ModuleName(s)>] [-ModuleVersion <ModuleVersion>]. -Name : Names of one or more resources to import. -ModuleName : Module names or ModuleSpecification objects of one or more modules to import. -ModuleVersion : Version of module to import. If used, ModuleName must represent only one module by name. +Nazwa : Nazwy jednego lub kilku zasobów do zaimportowania. +ModuleName : Nazwy modułów lub obiekty ModuleSpecification jednego lub kilku modułów do zaimportowania. +ModuleVersion : Wersja modułu do zaimportowania. Jeśli element jest używany, ModuleName musi wskazywać tylko jeden moduł według nazwy. - Import-DscResource dynamic keyword supports only one module when Name parameter is specified. + Dynamiczne słowo kluczowe Import-DscResource obsługuje tylko jeden moduł, gdy określisz parametr Name. - Positional parameters are not supported for the Import-DscResource dynamic keyword. The syntax of Import-DscResource dynamic keyword is: "Import-DscResource [-Name <ResourceName(s)>] [-ModuleName <ModuleName(s)>] [-ModuleVersion <ModuleVersion>] + Parametry pozycyjne nie są obsługiwane dla dynamicznego słowa kluczowego Import-DscResource. Składnia dynamicznego słowa kluczowego Import-DscResource to: „Import-DscResource [-Name <ResourceName(s)>] [-ModuleName <ModuleName(s)>] [-ModuleVersion <ModuleVersion>] - Unable to load resource '{0}': Resource not found. + Nie można załadować zasobu „{0}”: Nie znaleziono zasobu. - Configuration keyword is not allowed in constrainedLanguage mode. + Słowo kluczowe konfiguracji nie jest dozwolone w trybie constrainedLanguage. - The configuration name '{0}' is not valid. Standard names may only contain letters (a-z, A-Z), numbers (0-9), period (.), hyphen (-) and underscore (_). The name may not be null or empty, and should start with a letter. + Nazwa konfiguracji „{0}” jest nieprawidłowa. Nazwy standardowe mogą zawierać tylko litery (a-z, A-Z), cyfry (0-9), kropkę (.), łącznik (-) i podkreślenie (_). Nazwa nie może mieć wartości null ani być pusta i powinna zaczynać się od litery. - Configuration only supports the End block in its body. Begin, Process and DynamicParam blocks are not allowed in a configuration. + Konfiguracja obsługuje w treści tylko blok End. Bloki Begin, Process i DynamicParam nie są dozwolone w konfiguracji. - Cim deserializer threw an error when deserializing file {0}. + Deserializator modelu CIM zgłosił błąd podczas deserializacji pliku {0}. - '{0}' is not a valid value for property '{1}' on class '{2}'. Please change the value to one of the following strings: {3}. + Element „{0}” jest nieprawidłową wartością dla właściwości „{1}” w klasie „{2}”. Zmień wartość na jeden z następujących ciągów: {3}. - At least one of the values '{0}' is not supported or valid for property '{1}' on class '{2}'. Please specify only supported values: + Co najmniej jedna z wartości „{0}” nie jest obsługiwana lub prawidłowa dla właściwości „{1}” w klasie „{2}”. Określ tylko obsługiwane wartości: {3}. - Resource '{0}' requires that a value of type '{1}' be provided for property '{2}'. + Zasób „{0}” wymaga podania wartości typu „{1}” dla właściwości „{2}”. - Property '{0}' of Resource '{1}' has value '{2}' which is not between valid range '{3}' and '{4}'. + Właściwość „{0}” zasobu „{1}” ma wartość „{2}”, która nie mieści się w prawidłowym zakresie od „{3}” do „{4}”. - Failed to load the PowerShell data file '{0}' with the following error: + Nie można załadować pliku danych programu PowerShell „{0}”. Błąd: {1} - Cannot resolve the path '{0}' to a single .psd1 file. + Nie można rozpoznać ścieżki „{0}” jako jednego pliku .psd1. - The PowerShell data file '{0}' is invalid since it cannot be evaluated into a Hashtable object. + Plik danych programu PowerShell „{0}” jest nieprawidłowy, ponieważ nie można go ocenić jako obiektu tablicy skrótów. - Configuration is not supported on WinPE. + Konfiguracja nie jest obsługiwana w środowisku WinPE. - If the expression passed to the Where() operator is null then you must specify a non-Default value for the selection mode argument. Please change the value of the mode argument to a value other than Default and try running your script again. + Jeśli wyrażenie przekazane do operatora Where() ma wartość null, musisz określić dla argumentu trybu wyboru wartość inną niż domyślna. Zmień wartość argumentu trybu na inną niż domyślna i spróbuj ponownie uruchomić skrypt. - The generic collection type [{0}] passed to ForEach() has too many type arguments. Please change the specified type to be a generic collection with only one type argument then try running your script again. + Ogólny typ kolekcji [{0}] przekazany do parametru ForEach() ma zbyt wiele argumentów typu. Zmień podany typ na ogólną kolekcję z tylko jednym argumentem typu, a następnie spróbuj ponownie uruchomić skrypt. - Unable to convert input to the target type [{0}] passed to the ForEach() operator. Please check the specified type and try running your script again. + Nie można przekonwertować danych wejściowych na typ docelowy [{0}] przekazany do operatora ForEach(). Sprawdź określony typ i spróbuj ponownie uruchomić skrypt. - Script block with a 'clean' block is not supported by the 'ForEach' method. + Blok skryptu z blokiem „Clean” nie jest obsługiwany przez metodę „ForEach”. - The 'numberToReturn' value provided to the third argument of the Where() operator must be greater than zero. Please correct the argument's value and try running your script again. + Wartość „numberToReturn” przekazana jako trzeci argument operatora Where() musi być większa od zera. Popraw wartość argumentu i spróbuj ponownie uruchomić skrypt. - Redirection only allows another stream to be merged with the output stream. Please correct the redirection operation to merge into the output stream then try running your script again. + Przekierowanie umożliwia tylko scalenie innego strumienia ze strumieniem wyjściowym. Popraw operację przekierowania, aby scalić ją ze strumieniem wyjściowym, a następnie spróbuj uruchomić skrypt ponownie. - The ForEach() operator could not find a member '{0}' on the target object. Please verify that the named member exists and then try running your script again. + Operator ForEach() nie może znaleźć elementu „{0}” w obiekcie docelowym. Sprawdź, czy nazwany element istnieje, a następnie spróbuj ponownie uruchomić skrypt. - The '{0}' keyword is not supported in this version of the language. + Słowo kluczowe „{0}” nie jest obsługiwane w tej wersji języka. - The '{0}' property is not supported in this version of the language. + Właściwość „{0}” nie jest obsługiwana w tej wersji języka. - Duplicate '{0}' qualifier + Duplikat kwalifikatora „{0}” - Modifier '{0}' cannot be combined with '{1}' + Modyfikatora „{0}” nie można łączyć z elementem „{1}” - Missing using directive + Brak dyrektywy Using - Missing namespace alias + Brak aliasu przestrzeni nazw - Missing '=' operator + Brak operatora „=” - Missing using name + Brak nazwy użycia - Variable is not assigned in the method. + Zmienna nie jest przypisana w metodzie. - Missing a property name or method definition. + Brak nazwy właściwości lub definicji metody. - The member '{0}' is already defined. + Element „{0}” jest już zdefiniowany. - Only one type may be specified on class members. + Na elementach klasy można określić tylko jeden typ. - Error during creation of type "{0}". Error message: + Wystąpił błąd podczas tworzenia typu „{0}”. Komunikat o błędzie: {1} - Cannot convert the value to type "{0}". + Nie można przekonwertować wartości na typ „{0}”. - Property '{0}' cannot be found for attribute '{1}'. Specify one of the following properties: {2}. + Nie można odnaleźć właściwości „{0}” dla atrybutu „{1}”. Podaj jedną z następujących właściwości: {2}. - Attribute '{0}' is not valid on this declaration. It is valid on '{1}' declarations only. + W tej deklaracji atrybut „{0}” jest nieprawidłowy. Dotyczy to wyłącznie deklaracji „{1}”. - Attribute argument must be a constant. + Argument atrybutu musi być stałą. - Undefined DSC resource '{0}'. Use Import-DSCResource to import the resource. + Niezdefiniowany zasób DSC „{0}”. Użyj polecenia Import-DSCResource, aby zaimportować zasób. - Exception occurred when pre-parsing dynamic keyword '{0}' with details '{1}'. + Wystąpił wyjątek podczas wstępnego analizowania dynamicznego słowa kluczowego „{0}”. Szczegóły „{1}”. - Exception occurred when post-parsing dynamic keyword '{0}' with details '{1}'. + Wystąpił wyjątek podczas późniejszej analizy dynamicznego słowa kluczowego „{0}”. Szczegóły „{1}”. - Workflow is not supported in PowerShell 6+. + Przepływ pracy nie jest obsługiwany w programie PowerShell 6+. - Meta Configuration resource {0} is not allowed in the regular configuration. Use meta configuration resources in a configuration with [DscLocalConfigurationManager()] attribute. + Zasób Meta Configuration {0} nie jest dozwolony w zwykłej konfiguracji. Użyj zasobów Meta Configuration w konfiguracji z atrybutem [DscLocalConfigurationManager()]. - Regular DSC resource {0} is not allowed in the meta configuration. + Zwykły zasób DSC {0} nie jest dozwolony w konfiguracji meta. - There is no Runspace available to get and run the SteppablePipeline in this thread. You can provide one in the DefaultRunspace property of the System.Management.Automation.Runspaces.Runspace type. The script block you attempted to get SteppablePipeline from was: {0} + Nie ma dostępnego obszaru działania Runspace, aby pobrać i uruchomić element SteppablePipeline w tym wątku. Można podać tę opcję we właściwości DefaultRunspace typu System.Management.Automation.Runspaces.Runspace. Blok skryptu, z którego próbowano pobrać element SteppablePipeline, to: {0} - There are valid conversions from {0} to {1}. + Istnieją prawidłowe konwersje z {0} na {1}. - Cannot perform call. + Nie można wykonać wywołania. - Cannot retrieve type information. + Nie można pobrać informacji o typie. - Could not get dispatch ID for {0} (error: {1}). + Nie można pobrać identyfikatora wysyłania dla {0} (błąd: {1}). - Cannot find an overload for "{0}" and the argument count: "{1}" + Nie można znaleźć przeciążenia dla elementu „{0}” i liczby argumentów: „{1}” - Error while invoking {0}. Could not find member. + Błąd podczas wywoływania {0}. Nie można znaleźć elementu. - Error while invoking {0}. Named arguments are not supported. + Błąd podczas wywoływania {0}. Nazwane argumenty nie są obsługiwane. - Error while invoking {0}. Overflow detected. + Błąd podczas wywoływania {0}. Wykryto przepełnienie. - Error while invoking {0}. A required parameter was omitted. + Błąd podczas wywoływania {0}. Wymagany parametr został pominięty. - Exception setting "{0}": Cannot convert the "{1}" value of type "{2}" to type "{3}". + Wystąpił wyjątek podczas ustawiania „{0}”: Nie można przekonwertować wartości „{1}” typu „{2}” na typ „{3}". - IDispatch::GetIDsOfNames behaved unexpectedly for {0}. + Nieoczekiwane zachowanie funkcji IDispatch::GetIDsOfNames dla {0}. - Marshal.SetComObjectData failed. + Metoda Marshal.SetComObjectData zakończyła się niepowodzeniem. - Unexpected VarEnum {0}. + Nieoczekiwany element VarEnum {0}. - Attempting to pass an event handler of an unsupported type. + Próba przekazania obsługi zdarzeń nieobsługiwanego typu. - Configuration keyword is not supported in PowerShell 6+. + Słowo kluczowe konfiguracji nie jest obsługiwane w programie PowerShell 6+. - Not all code path returns value within method. + Nie wszystkie ścieżki kodu zwracają wartość w metodzie. - Invalid return statement within void method. + Nieprawidłowe instrukcja return w metodzie nieważnej. - Invalid return statement within non-void method. + Nieprawidłowa instrukcja return w metodzie zwracającej typ inny niż nieważny. - Missing '{0}' body in '{0}' declaration. + Brak treści „{0}” w deklaracji „{0}”. - Cannot define enum because of a cycle in the initialization expressions. + Nie można zdefiniować wyliczenia ze względu na cykl w wyrażeniach inicjalizacyjnych. - Enumerator value is either too large or too small for {0}. + Wartość modułu wyliczającego jest za duża lub za mała dla {0}. - Enumerator value must be a constant value. + Wartość wyliczenia musi być wartością stałą. - Exception occurred when performing semantic check for dynamic keyword '{0}' with details '{1}'. + Wystąpił wyjątek podczas sprawdzania semantycznego dynamicznego słowa kluczowego „{0}”. Szczegóły „{1}”. - The '{0}' property with type '{1}' of DSC resource class '{2}' is not supported. + Właściwość „{0}” o typie „{1}” klasy zasobu DSC „{2}” nie jest obsługiwana. - Missing '(' in class method parameter list. + Brak znaku „(„ na liście parametrów metody klasy. - A named block is not allowed in a class method. + Blok nazwany nie jest dozwolony w metodzie klasy. - A param block is not allowed in a class method. + Blok param jest niedozwolony w metodzie klasy. - Cannot inherit from sealed class '{0}'. + Nie można dziedziczyć po zapieczętowanej klasie „{0}”. - Type name expected. + Oczekiwano nazwy typu. - '{0}' is not a valid underlying type for enums. Expected a builtin integral type (one of byte, sbyte, short, ushort, int, uint, long or ulong) + Element „{0}” nie jest prawidłowym typem bazowym dla wyliczeń. Oczekiwano wbudowanego typu całkowitego (byte, sbyte, short, ushort, int, uint, long lub ulong) - '{0}': Interface name expected. + „{0}”: oczekiwano nazwy interfejsu. - Base class '{0}' does not contain a parameterless constructor. + Klasa bazowa „{0}” nie zawiera konstruktora bez parametrów. - Invalid base type '{0}'. Base type cannot be an array. + Nieprawidłowy typ podstawowy „{0}”. Typ podstawowy nie może być tablicą. - Invalid base type '{0}'. Base type cannot be a generic with unspecified parameters. + Nieprawidłowy typ podstawowy „{0}”. Typ podstawowy nie może być typem ogólnym z nieokreślonymi parametrami. - Missing 'base' after ':' in a base class constructor call. + Brakuje elementu „base” po znaku „:” w wywołaniu konstruktora klasy bazowej. - A constructor cannot specify a return type. + Konstruktor nie może określać zwracanego typu. - The DSC resource '{0}' has no default constructor. + Zasób DSC „{0}” nie ma konstruktora domyślnego. - The DSC resource '{0}' is missing a Get method that returns [{0}] and accepts no parameters. + Zasób DSC „{0}” nie ma metody Get, która zwraca [{0}] i nie przyjmuje żadnych parametrów. - The DSC resource '{0}' must have at least one key property (using the syntax [DscProperty(Key)].) + Zasób DSC „{0}” musi mieć co najmniej jedną właściwość klucza (z użyciem składni [DscProperty(Key)]). - The DSC resource '{0}' is missing a Set method that returns [void] and accepts no parameters. + Zasób DSC „{0}” nie ma metody Set, która zwraca [unieważnia] i nie przyjmuje żadnych parametrów. - The DSC resource '{0}' is missing a Test method that returns [bool] and accepts no parameters. + Zasób DSC „{0}” nie ma metody Test, która zwraca [wartość logiczną] i nie przyjmuje żadnych parametrów. - A static constructor cannot have any parameters. + Konstruktor statyczny nie może mieć żadnych parametrów. - The type '{0}' is not allowed on a property. + Typ „{0}” nie jest dozwolony w przypadku danej właściwości. - The type '{0}' is not allowed on a parameter. + Typ „{0}” nie jest dozwolony dla parametru. - Cannot access the non-static member '{0}' in a static method or initializer of a static property. + Nie można uzyskać dostępu do niestatycznej składowej „{0}” w metodzie statycznej lub inicjatorze właściwości statycznej. - Failed to parse module script file '{0}' with error -'{1}'. + Nie można przeanalizować pliku skryptu modułu „{0}” z błędem +„{1}”. - Cannot run a document in PowerShell: {0}. + Nie można uruchomić dokumentu w programie PowerShell: {0}. - Multiple type constraints are not allowed on a method parameter. + W parametrze metody nie można używać wielu ograniczeń typów. - This script contains malicious content and has been blocked by your antivirus software. + Ten skrypt zawiera złośliwą zawartość i został zablokowany przez oprogramowanie antywirusowe. - '{0}' cannot be specified in LocalConfigurationManager resource. Please switch to Settings instead or use only following values: {1}. + Nie można określić elementu „{0}” w zasobie LocalConfigurationManager. Zamiast tego przejdź do ustawień albo użyj tylko następujących wartości: {1}. - '{0}' is defined in a generic type. + Element „{0}” jest zdefiniowany w typie ogólnym. - Type name '{0}' is ambiguous, it could be '{1}' or '{2}'. + Nazwa typu „{0}” jest niejednoznaczna. Może oznaczać „{1}” albo „{2}”. - A 'using' statement must appear before any other statements in a script. + Instrukcja „Using” musi występować przed wszystkimi innymi instrukcjami w skrypcie. - This syntax of the 'using' statement is not supported. + Ta składnia instrukcji „Using” nie jest obsługiwana. - The specified namespace in the 'using' statement contains invalid characters. + Określona przestrzeń nazw w instrukcji „Using” zawiera nieprawidłowe znaki. - information stream + Strumień informacji - Invalid key property. The key property must be of [string], signed/unsigned integer, or Enum types. + Nieprawidłowa właściwość klucza. Właściwość klucza musi być typu [ciąg], liczbą całkowitą ze znakiem/bez znaku lub wyliczeniową. - Invalid Get method. Get method must return [{0}] and accepts no parameters. + Nieprawidłowa metoda Get. Metoda Get musi zwracać [{0}] i nie może przyjmować żadnych parametrów. Nie można załadować zestawu „{0}”. - Cannot use assembly with an UNC path: '{0}'. + Nie można użyć zestawu ze ścieżką UNC: „{0}”. - Cannot use assembly with uri schema '{0}'. + Nie można użyć zestawu ze schematem URI „{0}”. - Missing a newline or semicolon. + Brak nowego wiersza lub średnika. - Cannot assign property, use '{0}{1}'. + Nie można przypisać właściwości, użyj „{0}{1}”. - '{0}' is not a valid value for using name. + Element „{0}” nie jest prawidłową wartością do użycia nazwy. - Cannot assign property, use '{0}{1}'. + Nie można przypisać właściwości, użyj „{0}{1}”. - DebugMode should only have one value. + Element DebugMode powinien mieć tylko jedną wartość. - Label '{0}' not found inside the method. + Nie znaleziono etykiety „{0}” wewnątrz metody. - Failed to convert the value of CimProperty {0} to the property value of class {1}. + Nie można przekonwertować wartości CimProperty {0} na wartość właściwości klasy {1}. - Property {0} of PowerShell class {1} is not declared as array type, but defined in its configuration instance as instance array type. + Właściwość {0} klasy programu PowerShell {1} nie jest zadeklarowana jako typ tablicowy, ale w jej wystąpieniu konfiguracji jest zdefiniowana jako typ tablicowy wystąpienia. - Failed to create an object of PowerShell class {0}. + Nie można utworzyć obiektu klasy programu PowerShell {0}. - The hashtable supplied to the Desired State Configuration resource {0} is not valid. The key or value cannot be null or empty. + Tablica skrótów przekazana do zasobu Desired State Configuration {0} jest nieprawidłowa. Klucz lub wartość nie mogą mieć wartości null ani być puste. - The username supplied to the Desired State Configuration resource {0} is not valid. The username cannot be null or empty. + Nazwa użytkownika przekazana do zasobu Desired State Configuration {0} jest nieprawidłowa. Nazwa użytkownika nie może być pusta ani mieć wartości null. - The username supplied to the Desired State Configuration resource {0} is not valid. The username cannot be null or empty. + Nazwa użytkownika przekazana do zasobu Desired State Configuration {0} jest nieprawidłowa. Nazwa użytkownika nie może być pusta ani mieć wartości null. - Property {0} is not declared in PowerShell class {1}, but defined in its configuration instance. + Właściwość {0} nie jest zadeklarowana w klasie programu PowerShell {1}, ale jest zdefiniowana w jej wystąpieniu konfiguracji. - PartialConfiguration '{0}' has a Refresh Mode set to Disabled which is not a valid mode for Partial Configurations. Use Pull or Push refresh mode. + Element PartialConfiguration „{0}” ma ustawiony tryb odświeżania na wartość Wyłączony, który nie jest prawidłowym trybem dla konfiguracji częściowych. Użyj trybu odświeżania Wycofaj lub Przekaż. - Cannot create type. Only core types are supported in this language mode. + Nie można utworzyć typu. W tym trybie języka są obsługiwane tylko typy podstawowe. - Import-DscResource cannot be specified inside of Node context + Nie można określić elementu Import-DscResource wewnątrz kontekstu węzła $PSCulture, $PSUICulture, $true, $false, $null - Cannot assign automatic variable '{0}' with type '{1}' + Nie można przypisać zmiennej automatycznej „{0}” typu „{1}” - Conflict in using PsDscRunAsCredential for Resource {0} because it already specifies PsDscRunAsCredential value. We can only use one PsDscRunAsCredential for the composite resource. + Wystąpił konflikt podczas używania elementu PsDscRunAsCredential dla zasobu {0}, ponieważ określa on już wartość PsDscRunAsCredential. Dla zasobu złożonego możemy użyć tylko jednego elementu PsDscRunAsCredential. - Unable to find DSC schema store at "{0}". Please ensure PSDesiredStateConfiguration v3 module is installed. + Nie można odnaleźć magazynu schematów DSC w „{0}”. Upewnij się, że jest zainstalowany moduł PSDesiredStateConfiguration v3. {0} - This script contains content that has been flagged as suspicious through a policy setting and has been blocked with error code {0}. Contact your administrator for more information. + Ten skrypt zawiera zawartość, która została oznaczona jako podejrzana przez ustawienie zasad, i został zablokowany. Kod błędu {0}. Skontaktuj się z administratorem, aby uzyskać więcej informacji. - Cannot use '&' or '.' operators to invoke a module scope command across language boundaries. + Nie można używać operatorów „&” ani „ ” do wywoływania polecenia w zakresie modułu między granicami języka. - Class keyword is not allowed in ConstrainedLanguage mode. + Słowo kluczowe klasy nie jest dozwolone w trybie ConstrainedLanguage. - Missing ':' in the ternary expression. + Brak znaku „:” w wyrażeniu trójskładnikowym. - A pipeline chain operator must be followed by a pipeline. + Po operatorze łańcucha potoku musi wystąpić potok. - Background operators can only be used at the end of a pipeline chain. + Operatorów działających w tle można używać tylko na końcu łańcucha potoku. - Directly invoking the 'clean' block of a script block is not supported. + Bezpośrednie wywoływanie bloku „Clean” bloku skryptu nie jest obsługiwane. - Parser Configuration Keyword + Słowo kluczowe konfiguracji analizatora składni - The Configuration keyword will not be allowed in Constrained Language mode for untrusted script. + Słowo kluczowe konfiguracji nie będzie dozwolone w trybie języka z ograniczeniami dla niezaufanego skryptu. - Parser Class Keyword + Słowo kluczowe klasy analizatora składni - The Class keyword will not be allowed in Constrained Language mode for untrusted script. + Słowo kluczowe klasy nie będzie dozwolone w trybie języka z ograniczeniami dla niezaufanego skryptu. - Parser Data Section SupportedCommand + Sekcja danych analizatora składni SupportedCommand - The Data Section that includes the SupportedCommand parameter would be disallowed in Constrained Language mode for untrusted script. + Sekcja danych, która zawiera parametr SupportedCommand, będzie niedozwolona w trybie języka z ograniczeniami dla niezaufanego skryptu. - Module Scope Call Operator + Operator wywołania w zakresie modułu - The module scope call operator will be denied in Constrained Language mode. + Operator wywołania zakresu modułu zostanie odrzucony w trybie języka z ograniczeniami. - ForEach Keyword Method Invocation + Wywołanie metody dla słowa kluczowego ForEach - The ForEach keyword will fail '{0}' iteration item method invocation when run in Constrained Language mode. + Użycie słowa kluczowego ForEach spowoduje niepowodzenie wywołania metody elementu iteracji „{0}” w trybie języka z ograniczeniami. - Expression Evaluation May Fail + Obliczanie wyrażenia może zakończyć się niepowodzeniem - Creating a steppable pipeline from a script block may require evaluating some expressions within the script block. The expression evaluation will silently fail and return 'null' in Constrained Language mode, unless the expression represents a constant value. + Utworzenie krokowego potoku z bloku skryptu może wymagać oceny niektórych wyrażeń w bloku skryptu. W trybie języka z ograniczeniami ocena wyrażenia zakończy się niepowodzeniem i zwróci wartość „null”, chyba że wyrażenie reprezentuje wartość stałą. - Configuration keyword is not supported on ARM64 processors. + Słowo kluczowe konfiguracji nie jest obsługiwane na procesorach ARM64. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/pl/RunspaceInit.pl.resx b/src/System.Management.Automation/resources/pl/RunspaceInit.pl.resx index acfb5605bb6..e1fe526c0cb 100644 --- a/src/System.Management.Automation/resources/pl/RunspaceInit.pl.resx +++ b/src/System.Management.Automation/resources/pl/RunspaceInit.pl.resx @@ -118,114 +118,114 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Variable to hold the enabled experimental feature names + Zmienna do przechowywania włączonych nazw funkcji eksperymentalnych - Parent folder of the host application of the current runspace + Folder nadrzędny aplikacji hosta bieżącego obszaru działania - Folder containing the current user's profile + Folder zawierający profil bieżącego użytkownika - A reference to the host of the current runspace + Odwołanie do hosta bieżącego obszaru działania - The run objects available to cmdlets + Obiekty uruchamiania dostępne dla poleceń cmdlet - Version information for current PowerShell session + Informacje o wersji bieżącej sesji programu PowerShell - Current process ID + Identyfikator bieżącego procesu - Status of last command + Stan ostatniego polecenia - Parent process ID + Identyfikator procesu nadrzędnego - The ShellID identifies the current shell. This is used by #Requires. + Identyfikator ShellID identyfikuje bieżącą powłokę. Jest ona używana przez funkcję #Requires. - Name of the current console file + Nazwa bieżącego pliku konsoli - The text encoding used when piping text to a native executable file + Kodowanie tekstu używane podczas potokowania tekstu do natywnego pliku wykonywalnego - The text encoding used when reading output text from a native executable file + Kodowanie tekstu używane podczas odczytywania tekstu wyjściowego z natywnego pliku wykonywalnego - Configuration controlling how text is rendered. + Konfiguracja kontrolująca sposób renderowania tekstu. - Variable to contain the name of the email server. This can be used instead of the HostName parameter in the Send-MailMessage cmdlet. + Zmienna zawierająca nazwę serwera e-mail. Można go użyć zamiast parametru HostName w poleceniu cmdlet Send-MailMessage. - Dictates when confirmation should be requested. Confirmation is requested when the ConfirmImpact of the operation is equal to or greater than $ConfirmPreference. If $ConfirmPreference is None, actions will only be confirmed when Confirm is specified. + Określa, kiedy należy zażądać potwierdzenia. Żądanie potwierdzenia jest wymagane, gdy parametr ConfirmImpact operacji jest równy lub większy niż $ConfirmPreference. Jeśli parametr $ConfirmPreference ma wartość None, akcje będą potwierdzane tylko po określeniu opcji Potwierdź. - Dictates the action taken when a Debug message is delivered + Określa akcję podjętą po dostarczeniu komunikatu debugowania - Dictates the action taken when an error message is delivered + Dyktuje akcję podjętą po dostarczeniu komunikatu o błędzie - Dictates the action taken when progress records are delivered + Określa akcję wykonywaną po dostarczeniu rekordów postępu - Dictates the action taken when a Verbose message is delivered + Określa akcję podjętą po dostarczeniu pełnej wiadomości - Dictates the action taken when a Warning message is delivered + Określa akcję podjętą po dostarczeniu komunikatu ostrzegawczego - Dictates the action taken when a command generates an item in the Information stream + Określa akcję wykonaną, gdy polecenie wygeneruje element w strumieniu informacji - Dictates the view mode to use when displaying errors + Dyktuje tryb wyświetlania do użycia podczas wyświetlania błędów - Dictates what type of prompt should be displayed for the current nesting level + Określa, jaki typ monitu ma być wyświetlany dla bieżącego poziomu zagnieżdżania - If true, $ErrorActionPreference applies to native executables, so that non-zero exit codes will generate cmdlet-style errors governed by error action settings + W przypadku wartości true parametr $ErrorActionPreference dotyczy natywnych plików wykonywalnych, dzięki czemu kody zakończenia inne niż zero będą generować błędy w stylu poleceń cmdlet podlegające ustawieniom akcji błędów - If true, WhatIf is considered to be enabled for all commands. + W przypadku wartości true funkcja WhatIf jest uznawana za włączoną dla wszystkich poleceń. - Dictates how arguments are passed to native executables. + Określa sposób przekazywania argumentów do natywnych plików wykonywalnych. - Dictates the limit of enumeration on formatting IEnumerable objects + Określa limit wyliczania w przypadku formatowania obiektów IEnumerable - Displays errors with a stack trace + Wyświetla błędy ze śladem stosu - Displays errors with inner exceptions + Wyświetla błędy z wyjątkami wewnętrznymi - Displays errors with their sources + Wyświetla błędy ze źródłami - Displays errors with a description of the error class + Wyświetla błędy z opisem klasy błędów - Culture of the current PowerShell session + Kultura bieżącej sesji programu PowerShell - UI culture of the current PowerShell session + Kultura interfejsu użytkownika bieżącej sesji programu PowerShell - Variable to hold all default <cmdlet:parameter, value> pairs + Zmienna do przechowywania wszystkich domyślnych par <cmdlet:parameter, value> - Press Enter to continue... + Naciśnij klawisz Enter, aby kontynuować... - Edition information for the current PowerShell session + Informacje o wersji dla bieżącej sesji programu PowerShell \ No newline at end of file diff --git a/src/System.Management.Automation/resources/ru/MiniShellErrors.ru.resx b/src/System.Management.Automation/resources/ru/MiniShellErrors.ru.resx index b7d2e849e72..c6c6b1328a8 100644 --- a/src/System.Management.Automation/resources/ru/MiniShellErrors.ru.resx +++ b/src/System.Management.Automation/resources/ru/MiniShellErrors.ru.resx @@ -118,9 +118,9 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The update is not supported for the runspace configuration category {0}. + Обновление не поддерживается для категории конфигурации пространства выполнения {0}. - The following errors occurred when updating the assembly list for the runspace: {0}. + При обновлении списка сборок в пространстве выполнения возникли следующие ошибки: {0}. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/ru/NativeCP.ru.resx b/src/System.Management.Automation/resources/ru/NativeCP.ru.resx index 0104024c3f5..5c4d5aa60dc 100644 --- a/src/System.Management.Automation/resources/ru/NativeCP.ru.resx +++ b/src/System.Management.Automation/resources/ru/NativeCP.ru.resx @@ -118,30 +118,30 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - ScriptBlock should only be specified as a value of the Command parameter. + Параметр ScriptBlock следует указывать только в качестве значения параметра Command. - No value was specified for the Command parameter. + Для параметра Command не указано значение. - A value that is not valid ({6}) was specified for the {7} parameter. Valid values are Text and Xml. + Недопустимое значение ({6}) указано для параметра {7}. Допустимые значения: Text и Xml. - No value was specified for the InputFormat parameter. Valid values are Text and Xml. + Для параметра InputFormat не указано значение. Допустимые значения: Text и Xml. - No value was specified for the OutputFormat parameter. Valid values are text and XML. + Для параметра OutputFormat не указано значение. Допустимые значения: текст и XML. - The {6} parameter requires a string value. + Для параметра {6} требуется строка. - No value was specified for the Args parameter. + Значение параметра Args не указано. - The {6} parameter was already specified. + Параметр {6} уже указан. - Cannot process the XML from the '{0}' stream of '{1}': {2} + Не удается обработать XML из потока "{0}" "{1}": {2} \ No newline at end of file diff --git a/src/System.Management.Automation/resources/ru/RemotingErrorIdStrings.ru.resx b/src/System.Management.Automation/resources/ru/RemotingErrorIdStrings.ru.resx index 4ec3d094ee3..88f9a8fbfff 100644 --- a/src/System.Management.Automation/resources/ru/RemotingErrorIdStrings.ru.resx +++ b/src/System.Management.Automation/resources/ru/RemotingErrorIdStrings.ru.resx @@ -118,819 +118,819 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - An error of type "{0}" has occurred. + Произошла ошибка типа "{0}". - Out of process memory. + Недостаточно памяти процесса. - Remote PSSession enumeration with -ComputerName is only supported on Windows and not "{0}". + Удаленное перечисление PSSession с параметром -ComputerName поддерживается только в Windows, а не в " {0} ". - Pipeline ID "{0}" does not match the InstanceId of the pipeline that is currently running, "{1}". + Идентификатор конвейера " {0} " не совпадает с идентификатором экземпляра конвейера, который в данный момент запущен, " {1} ". - Pipeline Id "{0}" was not found on the server. + Идентификатор конвейера " {0} " не найден на сервере. - The remote pipeline has been stopped. + Работа удаленного конвейера остановлена. - The session already exists. Trying to create the session again with the same InstanceId {0} is not allowed. + Данная сессия уже существует. Повторная попытка создания сессии с тем же InstanceId {0} не допускается. - The specified client session InstanceId "{0}" does not match the existing session's InstanceId "{1}". + Указанный идентификатор экземпляра клиентской сессии " {0} " не совпадает с идентификатором экземпляра существующей сессии " {1} ". - Opening the remote session failed. + Не удалось открыть удалённую сессию. - The specified remote session with a client InstanceId of "{0}" cannot be found. + Указанная удаленная сессия с идентификатором экземпляра клиента " {0} " не найдена. - Prompt response has a prompt id "{0}" that cannot be found. + В ответном сообщении указан идентификатор сообщения " {0} ", который не найден. - Remote host call to "{0}" failed. + Вызов удаленного хоста к " {0} " завершился неудачей. - Remote host method {0} is not implemented. + Метод удаленного хоста {0} не реализован. - Remote host method data encoding is not supported for type {0}. + Кодирование данных метода удаленного хоста не поддерживается для типа {0} . - Remote host method data decoding is not supported for type {0}. + Декодирование данных методом удаленного хоста не поддерживается для типа {0} . - Creation of nested pipelines is not supported. + Создание вложенных конвейеров не поддерживается. - Relative URIs are not supported in the creation of remote sessions. + Использование относительных URI при создании удаленных сессий не поддерживается. - A failure occurred while decoding data from the remote host. There was an error in the network data. + Произошла ошибка при декодировании данных с удаленного хоста. Произошла ошибка в сетевых данных. - Only administrators can override the Thread Options remotely. + Только администраторы могут удаленно изменять параметры потока. - PowerShell Credential Request: {0} + Запрос учетных данных PowerShell: {0} - Warning: A script or application on the remote computer {0} is requesting your credentials. Enter your credentials only if you trust the remote computer and the application or script that is requesting them. + Предупреждение: скрипт или приложение на удаленном компьютере {0} запрашивает ваши учетные данные. Вводите свои учетные данные только в том случае, если вы доверяете удаленному компьютеру и приложению или скрипту, которые их запрашивают. {1} - A script or application on the remote computer {0} is asking to read a line securely. Enter sensitive information, such as your credentials, only if you trust the remote computer and the application or script that is requesting it. + Скрипт или приложение на удаленном компьютере {0} запрашивает безопасное чтение строки. Вводите конфиденциальную информацию, например, свои учетные данные, только в том случае, если вы доверяете удаленному компьютеру и приложению или скрипту, запрашивающему ее. - A script or application on the remote computer {0} is attempting to read the buffer contents on the PowerShell host. For security reasons, this is not allowed; the call has been suppressed. + Скрипт или приложение на удаленном компьютере {0} пытается прочитать содержимое буфера на хосте PowerShell. В целях безопасности это запрещено; звонок заблокирован. - A script or application on the remote computer {0} is sending a prompt request. When you are prompted, enter sensitive information, such as credentials or passwords, only if you trust the remote computer and the application or script that is requesting the data. + Скрипт или приложение на удаленном компьютере {0} отправляет запрос на ввод командной строки. При появлении запроса вводите конфиденциальную информацию, такую как учетные данные или пароли, только в том случае, если вы доверяете удаленному компьютеру и приложению или скрипту, запрашивающему эти данные. - Received unsupported remote host call: {0}. + Получен неподдерживаемый вызов удаленного хоста: {0} . - Received remoting data with unsupported action: {0}. + Получены данные удаленного доступа с неподдерживаемым действием: {0} . - Received remoting data with unsupported data type: {0}. + Получены данные удаленного доступа с неподдерживаемым типом данных: {0} . - Remoting data is missing the destination property. + В данных, передаваемых удаленно, отсутствует свойство назначения. - Remoting data is missing target interface property. + В данных, передаваемых удаленно, отсутствует свойство целевого интерфейса. - Remoting data is missing Session InstanceId property. + В данных для удаленного доступа отсутствует свойство Session InstanceId. - Remoting data is missing RemotingDataType property. + В данных для удаленного доступа отсутствует свойство RemotingDataType. - Remoting data is missing CallId property. + В данных удаленного доступа отсутствует свойство CallId. - Remoting data is missing MethodName property. + В данных, передаваемых удаленно, отсутствует свойство MethodName. - The IsStartFragment flag for the first fragment is not set. + Флаг IsStartFragment для первого фрагмента не установлен. - Remoting data is missing {0} property. + В данных удаленного доступа отсутствует {0} свойство . - Unexpected ObjectId received. This can happen if the fragments are not properly constructed by the remote computer, or the data might have been corrupted or changed. + Получен неожиданный ObjectId. Это может произойти, если фрагменты некорректно сформированы удалённым компьютером, или если данные были повреждены или изменены. - ObjectId cannot be less than or equal to 0. This can happen if the fragments are not properly constructed by the remote computer, or the data has been changed by unauthorized users. + Значение ObjectId не может быть меньше или равно 0. Это может произойти, если фрагменты некорректно сформированы на удалённом компьютере или данные были изменены неавторизованными пользователями. - The FragmentIDs of the same object must be in sequence, incrementally changing by 1. This can happen if the fragments are not properly constructed by the remote computer. The data might also have been corrupted or changed. + Идентификаторы фрагментов (FragmentID) одного и того же объекта должны располагаться последовательно, изменяясь на 1. Это может произойти, если фрагменты неправильно сформированы на удалённом компьютере. Данные также могли быть повреждены или изменены. - Remoting data is too large to be reassembled from the fragments. This can happen if the length of the data in a fragment is greater than Int32.Max. It can also occur if the data was changed by unauthorized users. + Объём данных, полученных удалённым способом, слишком велик для того, чтобы их можно было собрать заново из фрагментов. Это может произойти, если длина данных во фрагменте превышает Int32.Max. Это также может произойти, если данные были изменены неавторизованными пользователями. - The IsEndFragment flag is not set for the last fragment. This can happen if the fragments are not properly constructed by the remote computer, or if the data was corrupted or changed. + Для последнего фрагмента не установлен флаг IsEndFragment. Это может произойти, если фрагменты некорректно сформированы удалённым компьютером, или если данные были повреждены или изменены. - Deserialized remoting data is null. + Десериализованные данные удаленного доступа имеют значение null. - Fragment blob length is out of range: {0} + Длина фрагмента выходит за пределы допустимого диапазона: {0} - Error in decoding ErrorRecord. + Ошибка при декодировании ErrorRecord. - Error in decoding PipelineStateInfo. + Ошибка при декодировании PipelineStateInfo. - Error in decoding RunspaceStateInfo. + Ошибка при декодировании RunspaceStateInfo. - Received unsupported RemotingTargetInterface type: {0} + Получен неподдерживаемый тип RemotingTargetInterface: {0} - Remote host method was invoked on an unknown target class: {0} + Метод удаленного хоста был вызван для неизвестного целевого класса: {0} - Remote host method was invoked without specifying a target class. + Метод удаленного хоста был вызван без указания целевого класса. - Error in decoding RunspacePoolStateInfo. + Ошибка при декодировании RunspacePoolStateInfo. - Error in decoding Minimum runspaces. + Ошибка при декодировании минимального количества рабочих пространств. - Error in decoding Maximum runspaces. + Ошибка при декодировании максимального количества рабочих пространств. - Error in decoding PowerShellStateInfo. + Ошибка при декодировании PowerShellStateInfo. - Unexpected type of {0} property (expected {1}, got {2}). + Неожиданный тип {0} свойства (ожидался {1} , получен {2} ). - Unexpected type of remoting data (expected PSObject, got {0}). + Неожиданный тип данных удаленного доступа (ожидался PSObject, получен {0} ). - Unexpected type of encoded command (expected PSObject, got {0}). + Неожиданный тип закодированной команды (ожидался PSObject, получен {0} ). - Unexpected type of encoded command parameter (expected PSObject, got {0}). + Неожиданный тип закодированного параметра команды (ожидался PSObject, получен {0} ). - An error occurred while decoding data received from the remote computer. At least {0} bytes of data are required to decode a deserialized object that is received from a remote computer. This can happen if the fragments are not properly constructed by the remote computer, or if the data was corrupted or changed. + Произошла ошибка при декодировании данных, полученных с удаленного компьютера. Для декодирования десериализованного объекта, полученного с удаленного компьютера, требуется не менее {0} байт данных. Это может произойти, если фрагменты некорректно сформированы удалённым компьютером, или если данные были повреждены или изменены. - Received packet not destined for logged-on user: user = {0}, packet destination = {1}. + Получен пакет, не предназначенный для вошедшего в систему пользователя: пользователь = {0} , пункт назначения пакета = {1} . - The client negotiation timer has expired. The negotiation time-out interval is {0} milliseconds. + Таймер переговоров с клиентом истек. Интервал ожидания переговоров составляет {0} миллисекунд. - PowerShell client does not support the {0} {1} negotiated by the server. Make sure the server is compatible with the build {2} and the protocol version {3} of PowerShell. + Клиент PowerShell не поддерживает {0} {1}, согласованный сервером. Убедитесь, что сервер совместим со сборкой {2} и версией протокола {3} PowerShell. - {0}. Negotiation with the server failed. Make sure the server is compatible with the build {1} and the protocol version {2} of PowerShell. + {0} . Не удалось установить соединение с сервером. Убедитесь, что сервер совместим со сборкой {1} и версией протокола {2} PowerShell. - The destination server has sent a request to close the session. + Целевой сервер отправил запрос на закрытие сессии. - The server that is running PowerShell does not support the {0} {1} negotiated by the client computer. Verify that the client computer is compatible with the build {2} and the protocol version {3} of PowerShell. + Сервер, на котором выполняется PowerShell, не поддерживает {0} {1}, согласованное клиентским компьютером. Убедитесь, что клиентский компьютер совместим со сборкой {2} и версией протокола {3} PowerShell. - The server that is running PowerShell does not support connect operations on the {0} {1} that is negotiated by the client computer. Make sure the client computer is compatible with the build {2} and the protocol version {3} of PowerShell. + Сервер, на котором выполняется PowerShell, не поддерживает операции подключения для {0} {1}, согласованные клиентским компьютером. Убедитесь, что клиентский компьютер совместим со сборкой {2} и версией протокола {3} PowerShell. - The server that is running PowerShell cannot process the connect operation because the following information is not found or not valid: Client Capability information and Connect RunspacePool information. + Сервер, на котором запущен PowerShell, не может обработать операцию подключения, поскольку следующая информация не найдена или недействительна: информация о возможностях клиента и информация о пуле рабочих пространств подключения. - The server that is running PowerShell cannot process the connect operation because the server has either not been started, or it is shutting down. + Сервер, на котором запущен PowerShell, не может обработать операцию подключения, поскольку он либо не запущен, либо завершает работу. - The server that is running PowerShell cannot process the connect operation because the server runspace pool properties did not match the client computer specified properties. + Сервер, на котором запущен PowerShell, не может обработать операцию подключения, поскольку свойства пула рабочих пространств сервера не соответствуют свойствам, указанным на клиентском компьютере. - {0}. Negotiation with the client failed. Make sure the client is compatible with the build {1} and the protocol version {2} of PowerShell. + {0} . Переговоры с клиентом провалились. Убедитесь, что клиент совместим с сборкой {1} и версией протокола {2} PowerShell. - The server negotiation timer has expired. The negotiation time-out interval is {0} milliseconds. + Таймер согласования с сервером истек. Интервал ожидания переговоров составляет {0} миллисекунд. - The client computer has sent a request to close the session. + Клиентский компьютер отправил запрос на закрытие сессии. - An error has occurred which PowerShell cannot handle. A remote session might have ended. + Произошла ошибка, которую PowerShell не может обработать. Возможно, удаленная сессия завершилась. - The server did not respond with an encrypted session key within the specified time-out period. + Сервер не ответил зашифрованным ключом сессии в течение указанного периода ожидания. - The client did not respond with a public key within the specified time-out period. + Клиент не предоставил открытый ключ в течение указанного периода времени. - Connection attempt failed. + Попытка подключения не удалась. - Attempting to close the session. + Попытка закрыть сессию. - PowerShell cannot close the remote session properly. The session is in an undefined state because it was not opened or connected after being disconnected. PowerShell will try to force the session to close on the local computer, but the session might not be closed on the remote computer. To close a remote session properly, first open it or connect it. + PowerShell не может корректно закрыть удалённую сессию. Сеанс находится в неопределенном состоянии, поскольку после отключения он не был открыт или подключен. PowerShell попытается принудительно закрыть сессию на локальном компьютере, но на удалённом компьютере сессия может не закрыться. Чтобы корректно завершить удалённую сессию, сначала откройте её или подключитесь к ней. - Could not close the session. + Не удалось закрыть сессию. - The session is closed. + Заседание завершено. - The Wait handle type "{0}" is not supported. + Тип дескриптора ожидания " {0} " не поддерживается. - Received data has a stream ID index of "{0}". Only a Standard Output stream ID index of "0" is supported. + Полученные данные имеют индекс идентификатора потока " {0} ". Поддерживается только индекс идентификатора стандартного выходного потока, равный "0". - The Standard Input handle is not open. + Дескриптор стандартного ввода не открыт. - Native API call to WriteFile failed. Error code is {0}. + Вызов функции WriteFile через собственный API завершился неудачей. Код ошибки: {0} . - Native API call to ReadFile failed. Error code is {0}. + Вызов функции ReadFile через собственный API завершился неудачей. Код ошибки: {0} . - {0} is not a valid schema value. Valid values are "http" and "https". + {0} не является допустимым значением схемы. Допустимые значения: "http" и "https". - Client side receive call failed. + На стороне клиента вызов приема завершился неудачей. - Client side send call failed. + Вызов отправки на стороне клиента завершился неудачей. - The command handle returned from the WinRS API WSManRunShellCommand is null. + Дескриптор команды, возвращаемый API WinRS WSManRunShellCommand, равен null. - The Standard Input handle cannot be set to the 'no wait' state. The system error code is {0}. + Дескриптор стандартного ввода нельзя установить в состояние "без ожидания". Код ошибки системы: {0} . - The port number {0} is not within the range of valid values. The range of valid values is between 1 and 65535. + Номер порта {0} выходит за пределы допустимого диапазона значений. Допустимый диапазон значений — от 1 до 65535. - The server process has exited. + Серверный процесс завершился. - The call to Windows API GetStdHandle to get the Standard Input handle resulted in an error code: {0}. + Вызов функции Windows API GetStdHandle для получения дескриптора стандартного ввода привел к ошибке с кодом: {0} . - The call to Windows API GetStdHandle to get the Standard Output handle resulted in an error code: {0}. + Вызов функции Windows API GetStdHandle для получения дескриптора стандартного вывода привел к ошибке с кодом: {0} . - The call to Windows API GetStdHandle to get the Standard Error handle resulted in an error code: {0}. + Вызов функции Windows API GetStdHandle для получения дескриптора стандартного сообщения об ошибке привел к коду ошибки: {0} . - Connecting to remote server {0} failed. + Не удалось подключиться к удаленному серверу {0}. - Connecting to remote server {0} failed with the following error message : {1} + Подключение к удаленному серверу {0} завершилось с ошибкой: {1} - Closing the remote server shell instance failed with the following error message : {0} + Закрытие экземпляра оболочки удаленного сервера завершилось с ошибкой: {0} - Sending data to remote server {0} failed. + Отправка данных на удаленный сервер {0} не удалась. - Sending data to remote server {0} failed with the following error message : {1} + Отправка данных на удаленный сервер {0} завершилась с ошибкой: {1} - Receiving data from remote server {0} failed. + Получение данных с удалённого сервера {0} не удалось. - Processing data from remote server {0} failed with the following error message: {1} + Обработка данных с удаленного сервера {0} завершилась с ошибкой: {1} - Starting a command on the remote server failed. + Выполнение команды на удалённом сервере завершилось неудачей. - Starting a command on the remote server failed with the following error message : {0} + Запуск команды на удалённом сервере завершился с ошибкой: {0} - Reconnecting to a command on the remote server failed with the following error message : {0} + Повторное подключение к команде на удаленном сервере завершилось с ошибкой: {0} - Sending data to a remote command failed. + Не удалось отправить данные удаленному командному пункту. - Sending data to a remote command failed with the following error message: {0} + Отправка данных удаленной команде завершилась с ошибкой: {0} - Receiving data for a remote command failed. + Не удалось получить данные для удаленной команды. - Processing data for a remote command failed with the following error message: {0} + Обработка данных для удаленной команды завершилась с ошибкой: {0} - Error with error code {0} occurred while calling method {1}. + Ошибка с кодом ошибки {0} при вызове метода {1}. - {0} For more information, see the about_Remote_Troubleshooting Help topic. + {0} Для получения дополнительной информации см. раздел справки about_Remote_Troubleshooting. - Failed to disconnect from the remote server {0}. + Не удалось отключиться от удаленного сервера {0} . - Disconnecting from the remote server failed with the following error message : {0} + Отключение от удаленного сервера завершилось с ошибкой: {0} - Reconnecting to the remote server failed. + Повторное подключение к удалённому серверу не удалось. - Reconnecting to the remote server {0} failed with the following error message : {1} + Повторное подключение к удалённому серверу {0} завершилось с ошибкой: {1} - Inter-process communication (IPC) transport does not support connect operations. + Транспортный протокол межпроцессного взаимодействия (IPC) не поддерживает операции подключения. - An EndpointConfiguration with Id {0} does not exist on the remote server. Contact your PowerShell administrator, or the owner or creator of the endpoint configuration. + Конфигурация конечной точки с идентификатором {0} отсутствует на удаленном сервере. Обратитесь к администратору PowerShell, либо к владельцу или создателю конфигурации конечной точки. - The EndpointConfiguration with the {0} identifier is not in a valid initial session state on the remote computer. Contact your PowerShell administrator, or the owner or creator of the endpoint configuration. + Конечная точка конфигурации с {0} идентификатором находится в недопустимом состоянии начальной сессии на удаленном компьютере. Обратитесь к администратору PowerShell, либо к владельцу или создателю конфигурации конечной точки. - The mandatory value {0} is not specified for the {1} registry key. + Обязательное значение {0} не указано для {1} ключа реестра . - The mandatory value {0} is not in the correct format for registry key {1}. The expected format is 'string'. + Обязательное значение {0} имеет некорректный формат для ключа реестра {1}. Ожидаемый формат — 'строка'. - "{0}" must specify a PowerShell script file that ends with extension ".ps1". + " {0} " должен указывать файл сценария PowerShell, который заканчивается расширением ".ps1". - The {0} parameter is already specified in the {1} section. Contact your administrator to make sure that {0} is specified only once. + Параметр {0} уже указан в {1} разделе . Обратитесь к администратору, чтобы убедиться, что {0} указано только один раз. - Expected "{0}" and "{1}" attributes in the "{2}" element. + Ожидались атрибуты " {0} " и " {1} " в элементе " {2} ". - "{0}", "{1}" must be specified in the "{2}" section to dynamically load the assembly. + " {0} ", " {1} " необходимо указать в разделе " {2} " для динамической загрузки сборки. - Unable to load the assembly "{0}" specified in the "{1}" section. + Не удалось загрузить сборку " {0} ", указанную в разделе " {1} ". - Unable to load the type "{0}" specified in the "{1}" section. + Не удалось загрузить тип " {0} ", указанный в разделе " {1} ". - Both "{0}" and "{1}" must be specified in the "{2}" section. + Оба "{0}" и "{1}" должны быть указаны в разделе "{2}". - The destination "{0}" requested the connection to be redirected to "{1}". However "{1}" is not a well formatted URI. + Адрес назначения " {0} " запросил перенаправление соединения на " {1} ". Однако " {1} " не является правильно отформатированным URI. - {0}Redirect location reported: {1}. + {0} Сообщено местоположение перенаправления: {1} . - Your connection has been redirected to the following URI: "{0}" + Ваше соединение было перенаправлено на следующий URI: " {0} " - {0} To automatically connect to the redirected URI, verify the "{1}" property of the session preference variable "{2}", and use the "{3}" parameter on the cmdlet. + {0} Чтобы автоматически подключиться к перенаправленному URI, проверьте свойство " {1} " переменной предпочтений сессии " {2} " и используйте параметр " {3} " в командлете. - The current deserialized object size of the data received from the remote server exceeded the allowed maximum object size. The current deserialized object size is {0}. The allowed maximum object size is {1}. + Текущий размер десериализованного объекта данных, полученных с удаленного сервера, превысил допустимый максимальный размер объекта. Текущий размер десериализованного объекта равен {0} . Допустимый максимальный размер объекта равен {1} . - The total data received from the remote server exceeded the allowed maximum. The allowed maximum is {0}. + Общий объем данных, полученных с удаленного сервера, превысил допустимый максимум. Допустимый максимум равен {0} . - The current deserialized object size of the data received from the remote client computer exceeded the allowed maximum object size. The current deserialized object size is {0}. The allowed maximum object size is {1}. + Текущий размер десериализованного объекта данных, полученных с удаленного клиентского компьютера, превысил допустимый максимальный размер объекта. Текущий размер десериализованного объекта равен {0} . Допустимый максимальный размер объекта равен {1} . - The total data received from the remote client exceeded the allowed maximum. The allowed maximum is {0}. + Общий объем данных, полученных от удаленного клиента, превысил допустимый максимум. Допустимый максимум равен {0} . - Running startup script threw an error: {0}. + При запуске скрипта запуска возникла ошибка: {0} . - Specified RemoteRunspaceInfo objects have duplicates. + Указанные объекты RemoteRunspaceInfo имеют дубликаты. - Specified RemoteRunspaceInfo objects have exceeded the maximum allowable limit. + Количество указанных объектов RemoteRunspaceInfo превысило максимально допустимый предел. - Opening the remote session failed with an unexpected state. State {0}. + Попытка открытия удалённой сессии завершилась с неожиданной ошибкой. Штат {0} . - Specified Uri {0} is not valid. + Указанный Uri {0} недействителен. - Remote Session closed for Uri {0}. + Удалённая сессия закрыта для Uri {0} . - Remote session is not available for ComputerName {0}. + Удалённая сессия недоступна для ComputerName {0} . - Remote session is not available for {0}. + Удалённая сессия недоступна для {0} . - Remote Command: {0}, associated with the job that has an ID of "{1}". + Удалённая команда: {0} , связанная с заданием, имеющим идентификатор " {1} ". - A {0} cannot be specified when {1} is specified. + {0} нельзя указывать, если указан {1}. Подстановочные знаки не поддерживаются для параметра FilePath. Укажите путь без подстановочных знаков. - The path specified as the value of the FilePath parameter is not from the FileSystem provider. + Указанный в качестве значения параметра FilePath путь не принадлежит поставщику FileSystem. - The value of the FilePath parameter must be a PowerShell script file. Enter the path to a file with a .ps1 file name extension and try the command again. + Значение параметра FilePath должно быть файлом сценария PowerShell. Введите путь к файлу с расширением .ps1 и повторите команду. - One or more computer names are not valid. If you are trying to pass a URI, use the -ConnectionUri parameter, or pass URI objects instead of strings. + Одно или несколько имен компьютеров недействительны. Если вы пытаетесь передать URI, используйте параметр -ConnectionUri или передавайте объекты URI вместо строк. - The state of the current job instance is not valid for this operation. + Состояние текущего экземпляра задания недопустимо для данной операции. - The command cannot find the job because the job name {0} was not found. Verify the value of the Name parameter, and then try the command again. + Команда не может найти задание, поскольку имя задания {0} не найдено. Проверьте значение параметра Name, а затем повторите команду. - The command cannot find a job with the instance identifier {0}. Verify the value of the InstanceId parameter, and then try the command again. + Команда не может найти задание с идентификатором экземпляра {0} . Проверьте значение параметра InstanceId, а затем повторите выполнение команды. - The command cannot find a job with the job ID {0}. Verify the value of the Id parameter and then try the command again. + Команда не может найти задание с идентификатором задания {0} . Проверьте значение параметра Id, а затем повторите выполнение команды. - The command cannot remove the job with the job ID {0} and the name {1} because the job is not finished. To remove the job, first stop the job, or use the Force parameter. + Команда не может удалить задание с идентификатором задания {0} и именем {1} , поскольку задание не завершено. Чтобы удалить задание, сначала остановите его или используйте параметр "Принудительно". - The command cannot remove the job with the job ID {0} because the job is not finished. To remove the job, first stop the job, or use the Force parameter. + Команда не может удалить задание с идентификатором задания {0}, поскольку задание не завершено. Чтобы удалить задание, сначала остановите его или используйте параметр "Принудительно". - The command cannot remove the job with the job ID {0} and the instance identifier {1} because the job is not finished. To remove the job, first stop the job or use the Force parameter. + Команда не может удалить задание с идентификатором задания {0} и идентификатором экземпляра {1}, поскольку задание не завершено. Чтобы удалить задание, сначала остановите его или используйте параметр "Принудительно". - Remote Command: {0}, associated with a job that has an ID of "{1}". + Удалённая команда: {0} , связанная с заданием, имеющим идентификатор " {1} ". - The command cannot retrieve the jobs of the specified computers. The ComputerName parameter can be used only with jobs created by using PowerShell remoting. + Команда не может получить задания указанных компьютеров. Параметр ComputerName можно использовать только с заданиями, созданными с помощью удаленного доступа PowerShell. - The Session parameter can be used only with PSRemotingJob objects. + Параметр Session можно использовать только с объектами PSRemotingJob. - The remote session with the name {0} is not available. + Удалённая сессия с именем {0} недоступна. - The remote session with the session ID {0} is not available. + Удалённая сессия с идентификатором сессии {0} недоступна. - {0} does not contain an item with ID of {1}. + {0} не содержит элемент с ID {1} . - The command cannot remove the job because it does not exist or because it is a child job. Child jobs can be removed only by removing the parent job. + Команда не может удалить задание, поскольку оно не существует или является дочерним заданием. Дочерние задания можно удалить только путем удаления родительского задания. - {0} is not a valid value for the parameter {1}. The value must be greater than or equal to 0. + {0} не является допустимым значением для параметра {1}. Значение должно быть больше или равно нулю. - {0} cannot be specified as a proxy authentication mechanism. Only {1},{2} or {3} are supported for proxy authentication. + {0} не может быть указан в качестве механизма аутентификации прокси. Для аутентификации через прокси поддерживаются только {1} , {2} или {3} . - Proxy credentials cannot be specified when using the following proxy access type: {0}. Either specify a different access type, or do not specify proxy credentials. + Учетные данные прокси-сервера нельзя указать при использовании следующего типа доступа к прокси: {0} . Либо укажите другой тип доступа, либо не указывайте учетные данные прокси-сервера. Необходимо указать значение {0} для параметра сеанса {1}. - Session must be open. + Сессия должна быть открытой. - The host does not support Enter-PSSession and Exit-PSSession. + Хост не поддерживает команды Enter-PSSession и Exit-PSSession. - Multiple matches found for session ID {0}. + Найдено несколько совпадений для ИД сеанса {0}. - Multiple matches found for session ID {0}. + Найдено несколько совпадений для ИД сеанса {0}. - Multiple matches found for name {0}. + Найдено несколько совпадений для имени {0}. - Enter-PSSession failed because the remote session does not provide required commands. + Команда Enter-PSSession завершилась неудачей, поскольку удаленная сессия не содержит необходимых команд. - You cannot run Enter-PSSession from a nested prompt. + Нельзя запустить Enter-PSSession из вложенной командной строки. Максимальное число перенаправлений URI WS-Man, разрешенных при подключении к удаленному компьютеру - Default session options for new remote sessions + Параметры сессии по умолчанию для новых удалённых сессий - Name of the session configuration which will be loaded on the remote computer + Название конфигурации сессии, которая будет загружена на удалённый компьютер - AppName where the remote connection will be established + AppName — имя приложения, для которого будет установлено удалённое соединение - Contains information about the remote user starting the remote session. This variable is available only from a remote session. + Содержит информацию об удалённом пользователе, начинающем удалённую сессию. Эта переменная доступна только в удалённой сессии. - Either "{0}" and "{1}" must both be specified, or neither must not be specified. + Либо должны быть указаны и " {0} ", и " {1} ", либо ни один из них не должен быть указан. - Session configuration "{0}" was not found. + Конфигурация сессии " {0} " не найдена. - Session configuration "{0}" is not a PowerShell-based shell. + Конфигурация сессии " {0} " не является оболочкой на основе PowerShell. - Session configuration "{0}" is a PowerShell-based shell. Please use PowerShell 6+ to modify it. + Конфигурация сессии " {0} " — это оболочка на основе PowerShell. Для внесения изменений используйте PowerShell 6+. - Session configuration "{0}" is a Windows PowerShell-based shell. Please use Windows PowerShell to modify it. + Конфигурация сессии " {0} " — это оболочка на основе Windows PowerShell. Используйте Windows PowerShell для внесения изменений. - No session configuration matches criteria "{0}". + Ни одна конфигурация сессии не соответствует критериям " {0} ". {0} - Name: {0} + Имя: {0} - Name: {0}. This lets administrators remotely run PowerShell commands on this computer. + Имя: {0} . Это позволяет администраторам удаленно запускать команды PowerShell на этом компьютере. - Cannot delete temporary file {0}. Reason for failure: {1}. + Невозможно удалить временный файл {0} . Причина сбоя: {1}. - The new shell was successfully registered, but PowerShell cannot delete the temporary file {0}. Reason for failure: {1}. + Новая оболочка успешно зарегистрирована, но PowerShell не может удалить временный файл {0} . Причина сбоя: {1}. - Cannot write the shell configuration data into the temporary file {0}. Reason for failure: {1}. + Невозможно записать данные конфигурации оболочки во временный файл {0} . Причина сбоя: {1}. - Running command "{0}" to create a new session configuration. + Выполнение команды " {0} " для создания новой конфигурации сессии. - Name: {0} SDDL: {1}. This lets selected users remotely run PowerShell commands on this computer. + Имя: {0} SDDL: {1} . Это позволяет выбранным пользователям удаленно запускать команды PowerShell на этом компьютере. - Running command "{0}" to remove a session configuration. + Выполнение команды " {0} " для удаления конфигурации сессии. - Running command "{0}" to get PowerShell-based session configurations. + Выполнение команды " {0} " для получения конфигураций сеанса на основе PowerShell. - Running command "{0}" to update the session configuration properties. + Выполнение команды " {0} " для обновления свойств конфигурации сессии. - Name: {0} SDDL: {1} + Имя: {0} SDDL: {1} - Running command "{0}" to enable the session configuration. + Выполнение команды " {0} " для включения конфигурации сессии. - WinRM Quick Configuration + Быстрая настройка WinRM - Running command "{0}" to enable remote management of this computer by using the Windows Remote Management (WinRM) service. - This includes: - 1. Starting or restarting (if already started) the WinRM service - 2. Setting the WinRM service startup type to Automatic - 3. Creating a listener to accept requests on any IP address - 4. Enabling Windows Firewall inbound rule exceptions for WS-Management traffic (for http only). + Выполнение команды " {0} " для включения удаленного управления этим компьютером с помощью службы удаленного управления Windows (WinRM). + Это включает в себя: + 1. Запуск или перезапуск (если уже запущена) службы WinRM + 2. Установка типа запуска службы WinRM на "Автоматический" + 3. Создание слушателя для приема запросов с любого IP-адреса + 4. Включение исключений для входящих правил брандмауэра Windows для трафика WS-Management (только для HTTP). -Do you want to continue? +Продолжить? - Performing operation "{0}". + Выполнение операции " {0} ". - Name: {0} SDDL: {1}. This lets selected users remotely run PowerShell commands on this computer. + Имя: {0} SDDL: {1} . Это позволяет выбранным пользователям удаленно запускать команды PowerShell на этом компьютере. - Running command "{0}" to disable the session configuration. + Выполнение команды " {0} " для отключения конфигурации сессии. - Name: {0} SDDL: {1}. This denies access to this session configuration for everyone. + Имя: {0} SDDL: {1} . Это лишает всех доступа к данной конфигурации сессии. - Disabling the session configurations does not undo all the changes made by the Enable-PSRemoting or Enable-PSSessionConfiguration cmdlet. You might have to manually undo the changes by following these steps: - 1. Stop and disable the WinRM service. - 2. Delete the listener that accepts requests on any IP address. - 3. Disable the firewall exceptions for WS-Management communications. - 4. Restore the value of the LocalAccountTokenFilterPolicy to 0, which restricts remote access to members of the Administrators group on the computer. + Отключение настроек сеанса не отменяет всех изменений, внесенных командлетами Enable-PSRemoting или Enable-PSSessionConfiguration. Возможно, вам придётся отменить изменения вручную, выполнив следующие действия: + 1. Остановите и отключите службу WinRM. + 2. Удалите слушатель, принимающий запросы с любого IP-адреса. + 3. Отключите исключения брандмауэра для обмена данными с WS-Management. + 4. Верните значение параметра LocalAccountTokenFilterPolicy равным 0, что ограничит удаленный доступ к компьютеру только для членов группы "Администраторы". - Access is denied. To run this cmdlet, start PowerShell with the "Run as administrator" option. + Доступ запрещен. Для запуска этого командлета запустите PowerShell с параметром "Запуск от имени администратора". - Restarting WinRM service + Перезапуск службы WinRM "Restart-Service" - Name: {0} + Имя: {0} - The WinRM service must be restarted before a UI can be displayed for the SecurityDescriptor selection. Restart the WinRM service, and then run the following command: "{0}" + Для отображения интерфейса выбора SecurityDescriptor необходимо перезапустить службу WinRM. Перезапустите службу WinRM, а затем выполните следующую команду: " {0} " - Registering session configuration + Регистрация конфигурации сессии - The session configuration "{0}" was not found. Running command "{1}" to create the "{0}" session configuration. Running this command restarts the WinRM service. + Конфигурация сессии " {0} " не найдена. Выполнение команды " {1} " для создания конфигурации сессии " {0} ". Выполнение этой команды перезапустит службу WinRM. - "{0}" and "{1}" parameters cannot be specified together. Specify either "{0}" or "{1}" parameter. + " {0} " и " {1} " нельзя указывать одновременно. Укажите либо параметр " {0} ", либо параметр " {1} ". - This operation might restart the WinRM service. Do you want to continue? + В ходе этой операции может произойти перезапуск службы WinRM. Продолжить? - Cannot process an element with node type "{0}". Only {1} and {2} node types are supported. + Невозможно обработать элемент с типом узла " {0} ". Поддерживаются только типы узлов {1} и {2} . - Not enough data is available to process the {0} element. + Недостаточно данных для обработки {0} элемента . - Expected only two attributes with the names "{0}" and "{1}" in the {2} element. + Ожидалось наличие только двух атрибутов с именами " {0} " и " {1} " в элементе {2}. - Node type "{0}" is unknown in the {1} element. Only the "{2}" node type is expected in the {1} element. + Тип узла " {0} " неизвестен в элементе {1} . В элементе {1} ожидается только тип узла " {2} ". - Expected only one attribute with the name "{0}" in the {1} element. + Ожидалось наличие только одного атрибута с именем " {0} " в элементе {1} . - An unknown element "{0}" was received. This can happen if the remote process closed or ended abnormally. + Был получен неизвестный элемент " {0} ". Это может произойти, если удалённый процесс завершился с ошибкой. - The specified authentication mechanism "{0}" is not supported. Only "{1}" is supported for this operation. + Указанный механизм аутентификации " {0} " не поддерживается. Для этой операции поддерживается только " {1} ". - The pwsh executable cannot be found at "{0}". -Note that 'Start-Job' is not supported by design in scenarios where PowerShell is being hosted in other applications. Instead, usage of the 'ThreadJob' module is recommended in such scenarios. + Исполняемый файл pwsh не найден по адресу " {0} ". +Обратите внимание, что команда 'Start-Job' по умолчанию не поддерживается в сценариях, когда PowerShell размещается в других приложениях. Вместо этого в подобных сценариях рекомендуется использовать модуль 'ThreadJob'. - Cannot start a 32-bit 'pwsh' process from the 64-bit 'pwsh' installation. Install the 32-bit 'pwsh' if you need to run PowerShell in a 32-bit process. + Не удается запустить 32-битный процесс 'pwsh' из 64-битной версии установленной программы 'pwsh'. Установите 32-битную версию 'pwsh', если вам необходимо запускать PowerShell в 32-битном режиме. - The background process reported an error with the following message: {0}. + Фоновый процесс сообщил об ошибке со следующим сообщением: {0} . - The background process closed or ended abnormally: {0}. + Фоновый процесс завершился с ошибкой: {0} . - There is an error processing data from the background process. Error reported: {0}. + Произошла ошибка при обработке данных фоновым процессом. Сообщается об ошибке: {0} . - Data for an inactive command with the identifier {0} was received. Received data: {1}. + Получены данные для неактивной команды с идентификатором {0} . Получены данные: {1} . - A {0} message to a session is not supported. A {0} message can be sent only to a command. + Отправка {0} сообщения в сессию не поддерживается. Сообщение {0} может быть отправлено только команде. - The client did not receive a response for a signal operation in the specified time interval. This can happen when a command is not responding to a Stop message in a timely manner. + Клиент не получил ответа на сигнальную операцию в указанном временном интервале. Это может произойти, когда команда не отвечает на сообщение "Стоп" своевременно. - The client did not receive a response for a Close operation in the specified time interval. This can happen when a command is not responding to a Stop message in a timely manner. + Клиент не получил ответа на операцию закрытия в указанный интервал времени. Это может произойти, когда команда не отвечает на сообщение "Стоп" своевременно. - An error occurred while starting the background process. Error reported: {0}. + Произошла ошибка при запуске фонового процесса. Сообщается об ошибке: {0} . - The ThrottlingJob.AddChildJob method accepts only child jobs in the NotStarted state. + Метод ThrottlingJob.AddChildJob принимает только дочерние задания в состоянии NotStarted. {StrContains="ThrottlingJob.AddChildJob"} {StrContains="NotStarted"} - The ThrottlingJob.AddChildJob method cannot be called after a call to the ThrottlingJob.EndOfChildJobs method. + Метод ThrottlingJob.AddChildJob нельзя вызвать после вызова метода ThrottlingJob.EndOfChildJobs. {StrContains="ThrottlingJob.AddChildJob"} {StrContains="ThrottlingJob.EndOfChildJobs"} - {0}/{1} completed + {0} / {1} завершено {0} is a placeholder for a number of completed child jobs {1} is a placeholder for a total number of child jobs - Invoking a nested pipeline requires a valid runspace. + Для запуска вложенного конвейера требуется действующее рабочее пространство. - A {1} job source adapter threw an exception with the following message: {0} + {1} Адаптер источника заданий вызвал исключение со следующим сообщением: {0} - The value {0} is not valid for the {1} parameter. The only allowed value is 5.1. + Значение {0} недопустимо для параметра {1} . Допустимое значение — 5,1. - The Wait and Keep parameters cannot be used together in the same command. + Параметры Wait и Keep нельзя использовать одновременно в одной команде. Параметр WriteEvents нельзя использовать без параметра Wait. - PowerShell remoting endpoint versioning is not supported on PowerShell 7+. + Версионирование конечных точек удаленного доступа PowerShell не поддерживается в PowerShell 7 и более поздних версиях. - The following type cannot be instantiated because its constructor is not public: {0}. + Следующий тип не может быть создан, поскольку его конструктор не является публичным: {0} . - The job operation (Create, Get, or Remove) could not be performed because the JobSourceAdapter type specified in the JobDefinition is not registered. Register the JobSourceAdapter type either by using an explicit call, or by calling the Import-Module cmdlet, and then specifying an assembly. + Операция задания (Создание, Получение или Удаление) не может быть выполнена, поскольку тип JobSourceAdapter, указанный в JobDefinition, не зарегистрирован. Зарегистрируйте тип JobSourceAdapter либо с помощью явного вызова, либо с помощью вызова командлета Import-Module, а затем укажите сборку. - The job could not be created because the JobInvocationInfo does not contain a JobDefinition. Start the JobInvocationInfo with a JobDefinition. + Не удалось создать задание, поскольку JobInvocationInfo не содержит JobDefinition. Начните работу с JobInvocationInfo, указав JobDefinition. - The state of the current job instance is {0}. This state is not valid for the attempted operation. {1} + Состояние текущего экземпляра задания — {0} . Это состояние недопустимо для попытки выполнения операции. {1} - Unable to connect job "{0}" to the remote server. + Не удалось подключить задание " {0} " к удаленному серверу. - The Disconnect-PSSession operation failed for runspace Id = {0}. + Операция Disconnect-PSSession завершилась неудачей для пространства выполнения Id = {0} . - The connect operation failed for session {0}. The Runspace state is {1} instead of Opened. + Операция подключения для сессии {0} завершилась неудачей . Состояние Runspace — {1} вместо Opened. - The Disconnected PSSession query failed for computer "{0}". + Запрос PSSession " {0} " не выполнен из-за отключения компьютера. - Cannot connect PSSession "{0}", either because it is not in the Disconnected state, or it is not available for connection. + Невозможно подключиться к PSSession " {0} ", либо потому что он не находится в состоянии "Отключено", либо потому что он недоступен для подключения. - Session connect is not supported for PSSession "{0}" on target "{1}" because the target computer type is "{2}". + Подключение сеанса не поддерживается для PSSession " {0} " на целевом компьютере " {1} ", поскольку тип целевого компьютера - " {2} ". - Cannot disconnect PSSession "{0}" because it is not in the Opened state. + Невозможно отключить PSSession " {0} ", поскольку он не находится в состоянии "Открыт". - Session disconnect is not supported for PSSession "{0}" on target "{1}" because the target computer type is "{2}". + Разрыв сессии не поддерживается для PSSession " {0} " на целевом компьютере " {1} ", поскольку тип целевого компьютера - " {2} ". - Receive-PSSession does not support PSSession "{0}" on target "{1}" because the target computer type is "{2}". + Receive-PSSession не поддерживает PSSession " {0} " на целевом компьютере " {1} ", поскольку тип целевого компьютера — " {2} ". - The command cannot finish because the ChildJobs property contains a value that is not valid. + Команда не может быть завершена, поскольку свойство ChildJobs содержит недопустимое значение. - Cannot suspend the job that has an ID of {0}. Suspending jobs is not supported for some job types. For more information about support for suspending jobs, see the Help topic for the job type. + Невозможно приостановить задание с идентификатором {0} . Приостановка заданий не поддерживается для некоторых типов заданий. Для получения дополнительной информации о поддержке приостановки заданий см. раздел справки для соответствующего типа заданий. - Cannot resume the job that has an ID of {0}. Resuming jobs is not supported for some job types. For more information about support for resuming jobs, see the Help topic for the job type. + Невозможно возобновить выполнение задания с идентификатором {0} . Возобновление работы не поддерживается для некоторых типов заданий. Для получения дополнительной информации о поддержке возобновления заданий см. раздел "Справка" для соответствующего типа заданий. - You cannot use the Invoke-Command cmdlet with both the AsJob and Disconnected parameters in the same command. + Нельзя использовать командлет Invoke-Command с параметрами AsJob и Disconnected одновременно в одной команде. - The remote session query failed for {0} with the following error message: {1} + Запрос удаленной сессии завершился с ошибкой для {0} со следующим сообщением об ошибке: {1} - Attempted to create a job with ID {0}. A job with this ID cannot be created now. Verify that the ID has already been assigned once on this computer. + Была предпринята попытка создать задание с идентификатором {0} . В данный момент создать задание с таким идентификатором невозможно. Убедитесь, что идентификатор уже был присвоен на этом компьютере. - Cannot create a job with an ID of {0}; this is not a valid ID. Provide an integer for the job ID that is greater than 0. + Невозможно создать задание с идентификатором {0} ; это недействительный идентификатор. Укажите целое число в качестве идентификатора задания, которое больше 0. - The JobIdentifier provided must not be null. Please provide a valid JobIdentifier. + Указанный JobIdentifier не должен быть пустым. Укажите действительный идентификатор вакансии (JobIdentifier). - The Wait-Job cmdlet cannot finish working, because one or more jobs are blocked waiting for user interaction. Process interactive job output by using the Receive-Job cmdlet, and then try again. + Командлет Wait-Job не может завершить свою работу, поскольку одно или несколько заданий заблокированы в ожидании взаимодействия с пользователем. Обработайте выходные данные интерактивного задания с помощью командлета Receive-Job, а затем повторите попытку. - Remote session {0} could not be connected and could not be removed from the server. The client remote session object will be removed from the server, but the state of the remote session on the server is unknown. + Удалённая сессия {0} не может быть подключена и не может быть удалена с сервера. Объект удаленной сессии клиента будет удален с сервера, но состояние удаленной сессии на сервере неизвестно. - Disconnect-PSSession operation failed for runspace Id = {0} for the following reason: {1} + Операция Disconnect-PSSession завершилась неудачей для пространства выполнения с идентификатором = {0} по следующей причине: {1} - Job "{0}" could not be connected to the server and so could not be stopped. + Задание " {0} " не удалось подключиться к серверу, поэтому его нельзя было остановить. - The command cannot find a PSSession with an InstanceId value of "{0}". + Команда не может найти PSSession со значением InstanceId " {0} ". - The command cannot find a PSSession that has the name "{0}". + Команда не может найти PSSession с именем " {0} ". Удаленное взаимодействие PowerShell не поддерживается в среде предустановки Windows (WinPE). @@ -946,523 +946,523 @@ Note that 'Start-Job' is not supported by design in scenarios where PowerShell i Вы работаете в удаленном сеансе и выбрали параметр Force (принудительное выполнение), что может привести к перезапуску службы WinRM. Если служба WinRM перезапустится, текущий удаленный сеанс будет завершен, и для продолжения работы вам потребуется создать новый сеанс. - The job was null when trying to save identifiers. Specify a job to save its identifiers. + Задача завершилась с ошибкой при попытке сохранить идентификаторы. Укажите задание, для которого необходимо сохранить его идентификаторы. - A running command could not be found for this PSSession. + Для данной сессии PSSession не удалось найти выполняющуюся команду. - The Microsoft .NET Framework 2.0, which is required for Windows PowerShell 2.0, is not installed. Install the .NET Framework 2.0 and retry. + Для работы Windows PowerShell 2.0 не установлен Microsoft .NET Framework 2.0. Установите .NET Framework 2.0 и повторите попытку. - The remote pipeline failed. + Удалённый конвейер не сработал. - The remote pipeline failed for the following reason: {0} + Удаленный конвейер завершился с ошибкой по следующей причине: {0} - One or more jobs could not be resumed because the state was not valid for the operation. + Возобновить выполнение одной или нескольких работ не удалось, поскольку разрешение штата на их проведение отсутствовало. - No client computer was specified for the remote runspace that is running a client-side method. + Для удаленного пространства выполнения, на котором выполняется клиентский метод, не был указан клиентский компьютер. - Name: {0} SDDL: {1}. This denies remote access to this session configuration. + Имя: {0} SDDL: {1} . Это запрещает удалённый доступ к конфигурации данной сессии. - Enabled: False. This configures the WS-Management service to deny the connection request. + Включено: False. Это настраивает службу WS-Management таким образом, чтобы она отклоняла запросы на подключение. - Enabled: True. This configures the WS-Management service to accept the connection request. + Включено: True. Это настраивает службу WS-Management для приема запроса на подключение. - Aliases to be defined when applied to a session + Псевдонимы, которые будут определены при применении к сессии - Assemblies to load when applied to a session + Сборки, загружаемые при применении к сессии - Author of this document + Автор данного документа - Version of the CLR to use when applied to a session + Версия CLR, используемая при применении к сессии - Company associated with this document + Компания, связанная с данным документом - Copyright statement for this document + Заявление об авторских правах на данный документ - Description of the functionality provided by these settings + Описание функциональности, обеспечиваемой этими настройками - Environment variables to define when applied to a session + Переменные среды, которые определяются при применении к сессии - Execution policy to apply when applied to a session + Политика выполнения, применяемая применительно к сессии - Format files (.ps1xml) to load when applied to a session + Формат файлов (.ps1xml), загружаемых при применении к сессии - Functions to define when applied to a session + Функции, которые необходимо определить при применении к сессии - ID used to uniquely identify this document + Идентификатор используется для однозначной идентификации этого документа - Session type defaults to apply for this session configuration. Can be 'RestrictedRemoteServer' (recommended), 'Empty', or 'Default' + Для данной конфигурации сессии будут применяться параметры по умолчанию. Может принимать значения 'RestrictedRemoteServer' (рекомендуется), 'Empty' или 'Default'. - Directory to place session transcripts for this session configuration + Каталог для размещения стенограмм сессий для данной конфигурации сессии - Whether to run this session configuration as the machine's (virtual) administrator account + Следует ли запускать эту конфигурацию сессии от имени учетной записи виртуального администратора машины - Language mode to apply when applied to a session. Can be 'NoLanguage' (recommended), 'RestrictedLanguage', 'ConstrainedLanguage', or 'FullLanguage' + Языковой режим, применяемый к сессии. Может быть выбрано значение 'NoLanguage' (рекомендуется), 'RestrictedLanguage', 'ConstrainedLanguage' или 'FullLanguage' - Modules to import when applied to a session + Модули для импорта при применении к сессии - Version of the PowerShell engine to use when applied to a session + Версия механизма PowerShell, используемая при применении к сессии - Processor architecture to use when applied to a session + Архитектура процессора, используемая при применении к сессии - Version number of the schema used for this document + Номер версии схемы, использованной для данного документа - Scripts to run when applied to a session + Скрипты, которые запускаются при применении к сессии - Types to add when applied to a session + Типы, которые следует добавить при применении к сессии - Type files (.ps1xml) to load when applied to a session + Типы файлов (.ps1xml), которые будут загружаться при применении к сессии - Variables to define when applied to a session + Переменные, которые необходимо определить при применении к сессии - User roles (security groups), and the role capabilities that should be applied to them when applied to a session + Роли пользователей (группы безопасности) и возможности ролей, которые должны применяться к ним при использовании в рамках сессии - Aliases to make visible when applied to a session + Псевдонимы, позволяющие отображать их при применении к сессии - Cmdlets to make visible when applied to a session + Командлеты, которые отображаются при применении к сессии. - Could not parse visible command definition for '{0}'. The visible command definition must be a hashtable with the keys of 'Name' and 'Parameters'. The value of the 'Parameters' key must be a collection of hashtables with the keys 'Name', and optionally either 'ValidateSet' or 'ValidatePattern'. + Не удалось разобрать видимое определение команды для ' {0} '. Определение видимой команды должно представлять собой хэш-таблицу с ключами 'Name' и 'Parameters'. Значение ключа "Параметры" должно представлять собой набор хэш-таблиц с ключами "Имя" и, при необходимости, либо "Набор параметров", либо "Шаблон параметров". - Functions to make visible when applied to a session + Функции, которые становятся видимыми при применении к сессии - Providers to make visible when applied to a session + Поставщики услуг должны отображать информацию о применении к сессии. - External commands (scripts and applications) to make visible when applied to a session + Внешние команды (скрипты и приложения), которые отображаются при применении к сессии - PSSession Configuration file path '{0}' is not valid. The path argument must resolve to a single file in the file system with a '.pssc' extension. Please fix the path specification and try again. + Путь к файлу конфигурации PSSession ' {0} ' недействителен. В качестве аргумента пути необходимо указать единственный файл в файловой системе с расширением '.pssc'. Исправьте указание пути и попробуйте снова. - Role Capability file path '{0}' is not valid. The path argument must resolve to a single file in the file system with a '.psrc' extension. Please fix the path specification and try again. + Путь к файлу возможностей роли ' {0} ' недействителен. В качестве аргумента пути необходимо указать единственный файл в файловой системе с расширением '.psrc'. Исправьте указание пути и попробуйте снова. - The 'Roles' entry must be a hashtable, but was a {0}. + Запись "Роли" должна быть хеш-таблицей, но оказалась {0} . - Could not convert the value of the '{0}' role entry to a hashtable. The 'Roles' entry must be a hashtable with group names for keys, where the value associated with each key is another hashtable of session configuration properties for that role. + Не удалось преобразовать значение записи роли ' {0} ' в хэш-таблицу. В поле "Роли" должна быть хэш-таблица с именами групп в качестве ключей, где значением, связанным с каждым ключом, является другая хэш-таблица свойств конфигурации сессии для данной роли. - Could not find the role capability, '{0}'. The role capability must be a file named '{1}' within a 'RoleCapabilities' directory in a module in the current module path. + Не удалось найти возможность роли ' {0} '. Возможности роли должны представлять собой файл с именем ' {1} ' в каталоге 'RoleCapabilities' в модуле, находящемся в текущем пути модуля. - Cannot find module path to import. The value of the ModulesToImport parameter {0} does not exist or is not a module directory. Correct the value and try the command again. + Не удается найти путь к модулю для импорта. Значение параметра ModulesToImport {0} не существует или не является каталогом модуля. Исправьте значение и повторите команду. - The specified configuration file '{0}' was not loaded because no valid configuration file was found. + Указанный файл конфигурации ' {0} ' не был загружен, поскольку не был найден действительный файл конфигурации. - Computer {0} has been successfully disconnected. + Компьютер {0} успешно отключен. - The reconnection attempt to {0} failed. Attempting to disconnect the session... + Попытка повторного подключения к {0} не удалась. Попытка разорвать сессию... - Attempting to reconnect to {0} ... + Попытка повторного подключения к {0} ... - Network connectivity to {0} has been lost and the attempt to reconnect has failed. Please repair the network connection and reconnect using Connect-PSSession or Receive-PSSession. + Сетевое соединение с {0} потеряно, попытка восстановления соединения не удалась. Восстановите сетевое соединение и переподключитесь, используя команды Connect-PSSession или Receive-PSSession. - The network connection to {0} has been interrupted. Attempting to reconnect for up to {1} minutes... + Сетевое соединение с {0} прервано. Попытка переподключения длится до {1} минут... - The network connection to {0} has been restored. + Сетевое соединение с {0} восстановлено. - {0} authentication requires an explicit user name and password. Specify the user name and password by using the -Credential parameter and try the command again. + {0} Для аутентификации требуется явное имя пользователя и пароль. Укажите имя пользователя и пароль, используя параметр -Credential, и повторите команду. - Basic authentication is not supported over HTTP on Unix. + В системах Unix базовая аутентификация по протоколу HTTP не поддерживается. - Cannot find a scheduled job with name {0}. + Не удалось найти запланированное задание с именем {0} . {0} is the job definition name - More than one job definition was found with name {0}. Try including the -DefinitionType parameter to Start-Job in order to narrow the search for the job definition to a single job source adapter. + Было найдено более одного определения работы с именем {0} . Попробуйте добавить параметр -DefinitionType к команде Start-Job, чтобы сузить поиск определения задания до одного адаптера источника заданий. - The member 'SchemaVersion' is not present in the configuration file. This member must exist and be assigned a version number of the form 'n.n.n.n'. Please add the missing member to the file {0}. + В конфигурационном файле отсутствует элемент 'SchemaVersion'. Этот элемент должен существовать, и ему должно быть назначено значение версии в формате "n.n.n.n". Добавьте недостающий элемент в файл {0} . - The member '{0}' must be a string. Change the member to the correct type in the file {1}. + Член ' {0} ' должен быть строкой. Измените тип элемента на правильный в файле {1} . - The member '{0}' must be a string array. Change the member to the correct type in the file {1}. + Элемент ' {0} ' должен быть строковым массивом. Измените тип элемента на правильный в файле {1} . - The member '{0}' must be a hashtable. Change the member to the correct type in the file {1}. + Член ' {0} ' должен быть хеш-таблицей. Измените тип элемента на правильный в файле {1} . - The member '{0}' must be a hashtable array. Change the member to the correct type in the file {1}. + Элемент ' {0} ' должен быть массивом хеш-таблицы. Измените тип элемента на правильный в файле {1} . - The member '{0}' is not a valid key. Please change the member to a valid key in the file {1}. + Элемент ' {0} ' не является допустимым ключом. Измените элемент на действительный ключ в файле {1} . - The member '{0}' must be a valid enumeration type "{1}". Valid enumeration values are "{2}". Change the member to the correct type in the file {3}. + Член ' {0} ' должен быть допустимым типом перечисления " {1} ". Допустимые значения перечисления: " {2} ". Измените тип элемента на правильный в файле {3} . - Error parsing configuration file {0} with the following message: {1} + Ошибка при разборе файла конфигурации {0} со следующим сообщением: {1} Параметр -WriteJobInResults нельзя использовать без параметра -Wait. - The member '{0}' is not an absolute path {1}. Change the member to an absolute path in the file {2}. + Член ' {0} ' не является абсолютным путем {1} . Измените элемент на абсолютный путь в файле {2} . - The key '{0}' in the member '{1}' is not valid. Change the key in the file {2}. + Ключ ' {0} ' в элементе ' {1} ' недействителен. Измените ключ в файле {2} . - The member '{0}' must contain the required key '{1}'. Add the require key to the file {2}. + Элемент ' {0} ' должен содержать требуемый ключ ' {1} '. Добавьте ключ require в файл {2} . - The key '{0}' contains an extension {1} that is not valid. Specify an extension from the following list: {{{2}}}. + Ключ ' {0} ' содержит расширение {1} , которое недействительно. Укажите расширение из следующего списка: {{{2}}}. - The key '{0}' in the member '{1}' must be a script block. Change the key to the correct type in the file {2}. + Ключ ' {0} ' в элементе ' {1} ' должен быть блоком скрипта. Измените ключ на правильный тип в файле {2} . - The session configuration file {0} is not valid. Specify a valid session configuration file and try the command again. + Файл конфигурации сессии {0} недействителен. Укажите действительный файл конфигурации сессии и повторите команду. - Network connection interrupted + Сетевое соединение прервано - Attempting to reconnect to {0} ... + Попытка повторного подключения к {0} ... - Job {0} has been created for reconnection. + Задание {0} создано для повторного подключения. - Session {0} with instance ID {1} on computer {2} has been successfully disconnected. + Сессия {0} с идентификатором экземпляра {1} на компьютере {2} успешно разорвана. - Session {0} with instance ID {1} has been created for reconnection. + Создана сессия {0} с идентификатором экземпляра {1} для повторного подключения. - The SessionName parameter can only be used with the Disconnected switch parameter. + Параметр SessionName можно использовать только с параметром переключателя Disconnected. - A failure occurred while attempting to connect the PSSession. + Произошла ошибка при попытке подключения к PSSession. - A failure occurred while attempting to connect to the target virtual machine. + Произошла ошибка при попытке подключения к целевой виртуальной машине. - A failure occurred while attempting to connect to the target container. + Произошла ошибка при попытке подключения к целевому контейнеру. - The PSSession is in a disconnected state and is not available for connection. + PSSession находится в отключенном состоянии и недоступен для подключения. - The Hyper-V Module for PowerShell is not available on this machine. + Модуль Hyper-V для PowerShell недоступен на этом компьютере. - Failed to launch PowerShell process ({1}) inside container with id {0} with error: {2}. + Не удалось запустить процесс PowerShell ( {1} ) внутри контейнера с идентификатором {0} с ошибкой: {2} . - The Containers feature may not be enabled on this machine. + Функция "Контейнеры" может быть отключена на этом компьютере. - Failed to terminate PowerShell process with id {0} inside container with id {1}. + Не удалось завершить процесс PowerShell с идентификатором {0} внутри контейнера с идентификатором {1} . - The input ContainerId {0} does not exist, or the corresponding container is not running. + Входной идентификатор контейнера {0} не существует, или соответствующий контейнер не запущен. - The input VMId parameter does not resolve to a single virtual machine. + Параметр VMId, введенный в качестве входных данных, не соответствует ни одной конкретной виртуальной машине. - The input VMId {0} does not resolve to a single virtual machine. + Входной VMId {0} не соответствует ни одной виртуальной машине. - The input VMName parameter does not resolve to any virtual machine. + Параметр VMName, введенный в качестве входных данных, не соответствует ни одной виртуальной машине. - The input VMName parameter resolves to multiple virtual machines. + Параметр input VMName разрешается в несколько виртуальных машин. - The input VMName {0} does not resolve to a single virtual machine. + Входной параметр VMName {0} не соответствует ни одной виртуальной машине. - The virtual machine {0} is not in running state. + Виртуальная машина {0} не находится в рабочем состоянии. - The credential is invalid. + Учетные данные недействительны. - The input username cannot be empty. + Вводимое имя пользователя не может быть пустым. - Cannot enter session {0} because it is not in the disconnected state or is not available for connection. Retrieve the remote session using Get-PSSession -ComputerName {1} -InstanceId {2}. + Невозможно войти в сессию {0}, поскольку она не находится в состоянии отключения или недоступна для подключения. Получите удаленную сессию с помощью команды Get-PSSession -ComputerName {1} -InstanceId {2} . - Cannot enter session {0} because it is not in the disconnected state or is not available for connection. Reconnect using Connect-PSSession or Receive-PSSession. + Невозможно войти в сессию {0}, поскольку она не находится в состоянии отключения или недоступна для подключения. Переподключитесь, используя команды Connect-PSSession или Receive-PSSession. - Network connectivity to {0} has been lost and the reconnection attempt failed. Please repair the network connection and reconnect using Connect-PSSession or Receive-PSSession. + Сетевое соединение с {0} было потеряно, попытка повторного подключения не удалась. Восстановите сетевое соединение и переподключитесь, используя команды Connect-PSSession или Receive-PSSession. - Failed to create an instance of RemoteSessionHyperVSocketClient due to SetSocketOption failure. + Не удалось создать экземпляр RemoteSessionHyperVSocketClient из-за ошибки при использовании SetSocketOption. - Failed to create an instance of RemoteSessionHyperVSocketServer. + Не удалось создать экземпляр RemoteSessionHyperVSocketServer. - Reconnection attempt canceled. Please repair the network connection and reconnect using Connect-PSSession or Receive-PSSession. + Попытка повторного подключения отменена. Восстановите сетевое соединение и переподключитесь, используя команды Connect-PSSession или Receive-PSSession. - One or more jobs could not be suspended because the state was not valid for the operation. + Приостановить выполнение одного или нескольких заданий было невозможно, поскольку данное предприятие не соответствовало требованиям законодательства штата. - The -AutoRemoveJob parameter cannot be used without the -Wait parameter + Параметр -AutoRemoveJob нельзя использовать без параметра -Wait - The WS-Management service cannot process the request. Cannot find the {0} session configuration in the WSMan: drive on the {1} computer. For more information, see the about_Remote_Troubleshooting Help topic. + Служба WS-Management не может обработать запрос. Не удается найти {0} конфигурацию сессии на диске WSMan: на {1} компьютере . Для получения дополнительной информации см. раздел справки about_Remote_Troubleshooting. - A job could not be created from the {0} specification because the provided runspace is not a local runspace. Try again using a local runspace, or specify a RunspaceMode argument. + Не удалось создать задание на основе спецификации {0}, поскольку предоставленное рабочее пространство не является локальным рабочим пространством. Попробуйте еще раз, используя локальное рабочее пространство, или укажите аргумент RunspaceMode. - The session {0} cannot be disconnected because the specified idle time-out value {1} (seconds) is either greater than the server maximum allowed {2} (seconds), or less than the minimum allowed {3} (seconds). Specify an idle time-out value that is within the allowed range, and try again. + Сеанс {0} не может быть разорван, поскольку указанное значение тайм-аута простоя {1} (секунд) либо превышает максимально допустимое значение сервера {2} (секунд), либо меньше минимально допустимого значения {3} (секунд). Укажите значение тайм-аута бездействия, находящееся в допустимом диапазоне, и повторите попытку. {0} is a placeholder for the session name {1} is a placeholder for the provided idletimeout value {2} is a placeholder for the maximum allowed idletimeout value {3} is a placeholder for the minimum allowed idletimeout value - The specified IdleTimeout session option {0} (seconds) is not a valid period. Specify an IdleTimeout value that is greater than or equal to the minimum allowed {1} (seconds). + Указанный параметр сессии IdleTimeout {0} (секунды) не является допустимым периодом. Укажите значение IdleTimeout, большее или равное минимально допустимому значению {1} (секунд). {0} is a placeholder for the provided idletimeout {1} is a placeholder for the minimum allowed idletimeout value - The cmdlet "{0}" or the alias "{1}" cannot be present when "{2}","{3}","{4}" or "{5}" keys are specified in the session configuration file. + Командлет " {0} " или псевдоним " {1} " не могут присутствовать, если в файле конфигурации сессии указаны ключи " {2} ", " {3} ", " {4} " или " {5} ". - "The transport option is not valid. Parameter "{0}" can be non-zero only if parameter "{1}" is set to true." + "Вариант с транспортом не подходит". Параметр " {0} " может быть ненулевым только в том случае, если параметр " {1} " установлен в значение true. - The member '{0}' must be an array consisting of either string or hashtable elements. + Элемент ' {0} ' должен быть массивом, состоящим либо из строковых элементов, либо из элементов хеш-таблицы. - The member '{0}' must be an array consisting of either string or hashtable elements. Change the member to the correct type in the file {1}. + Элемент ' {0} ' должен быть массивом, состоящим либо из строковых элементов, либо из элементов хеш-таблицы. Измените тип элемента на правильный в файле {1} . - Cannot retrieve the job definition '{0}' because path '{1}' refers to a '{2}' provider path. Change the path parameter to a file system path. + Невозможно получить определение задания ' {0} ', поскольку путь ' {1} ' ссылается на путь поставщика ' {2} '. Измените параметр path на путь к файлу в файловой системе. {0} is job definition name {1} is the user provided path {2} is the path provider - Cannot retrieve the job definition '{0}' because path '{1}' resolves to multiple file paths. Change the path parameter so that it is a single path. + Невозможно получить определение задания ' {0} ', поскольку путь ' {1} ' разрешается в несколько путей к файлам. Измените параметр пути так, чтобы он указывал на один единственный путь. {0} is job definition name {1} is the user provided path - Cannot find a scheduled job with type {0} and name {1}. + Не удалось найти запланированное задание с типом {0} и именем {1} . {0} is the job definition type and {1} is the job definition name. - Cannot find the WorkingDirectory path {0}. + Не удается найти путь к рабочему каталогу {0} . - Cannot connect to session {0}. The session no longer exists on computer {1}. + Невозможно подключиться к сессии {0} . Сессия больше не существует на компьютере {1} . {0} is the session name that cannot be found. {1} is the computer name where the session was. - The connect operation failed for session {0} with the following error message: {1} + Операция подключения для сессии {0} завершилась с ошибкой: {1} - The -Force parameter cannot be used without the -Wait parameter. + Параметр -Force нельзя использовать без параметра -Wait. - One or more jobs are in a suspended or disconnected state, and cannot continue without additional user input. Specify the -Force parameter to continue to a completed, failed, or stopped state. + Одна или несколько задач находятся в приостановленном или отключенном состоянии и не могут быть продолжены без дополнительного вмешательства пользователя. Укажите параметр -Force, чтобы перейти к состоянию "завершено", "сбой" или "остановлено". - When RunAs is enabled in a PowerShell session configuration, the Windows security model cannot enforce a security boundary between different user sessions that are created by using this endpoint. Verify that the PowerShell runspace configuration is restricted to only the necessary set of cmdlets and capabilities. + Если в конфигурации сеанса PowerShell включена опция RunAs, модель безопасности Windows не может обеспечить границу безопасности между различными пользовательскими сеансами, созданными с помощью этой конечной точки. Убедитесь, что конфигурация пространства выполнения PowerShell ограничена только необходимым набором командлетов и возможностей. - The job was suspended successfully by adding the Force parameter. + Задание было успешно приостановлено путем добавления параметра Force. - The session configuration file {0} is not valid. Specify a valid session configuration file and try the command again. Error parsing configuration file: {1}. + Файл конфигурации сессии {0} недействителен. Укажите действительный файл конфигурации сессии и повторите команду. Ошибка при разборе файла конфигурации: {1} . - Register-PSSessionConfiguration : The '{0}' key in the {1}. session configuration file contains a value that is not valid. Correct the file and try the command again. + Register-PSSessionConfiguration: Ключ ' {0} ' в файле конфигурации сессии {1} содержит недопустимое значение. Исправьте файл и попробуйте выполнить команду снова. - Disconnected sessions are supported only when the remote computer is running PowerShell 3.0 or a later version of PowerShell. + Поддержка отключенных сеансов возможна только при использовании на удаленном компьютере PowerShell версии 3.0 или более поздней. - Memory usage of a cmdlet has exceeded a warning level. To avoid this situation, try one of the following: 1) Lower the rate at which CIM operations produce data (for example, by passing a low value to the ThrottleLimit parameter), 2) Increase the rate at which data is consumed by downstream cmdlets, or 3) Use the Invoke-Command cmdlet to run the whole pipeline on the server. The cmdlet that exceeded a warning level of memory usage was started by the following command line: {0} + Использование памяти командлетом превысило допустимый уровень, о котором может быть выдано предупреждение. Чтобы избежать этой ситуации, попробуйте одно из следующих действий: 1) Снизьте скорость генерации данных операциями CIM (например, передав низкое значение параметру ThrottleLimit), 2) Увеличьте скорость потребления данных нижестоящими командлетами, или 3) Используйте командлет Invoke-Command для запуска всего конвейера на сервере. Командлет, превысивший допустимый уровень использования памяти, был запущен из следующей командной строки: {0} - PSSession {0} was created using the EnableNetworkAccess parameter and can only be reconnected from the local computer. + PSSession {0} был создан с использованием параметра EnableNetworkAccess и может быть повторно подключен только с локального компьютера. - Cannot start job. The language mode for this session is incompatible with the system-wide language mode. + Не удается запустить задание. Языковой режим для данной сессии несовместим с общесистемным языковым режимом. - Cannot create runspace. The language mode for this configuration is incompatible with the system-wide language mode. + Невозможно создать рабочее пространство. Языковой режим для данной конфигурации несовместим с общесистемным языковым режимом. - Cannot exit a nested pipeline because the pipeline is not in the nested state. + Невозможно выйти из вложенного конвейера, поскольку конвейер не находится в состоянии вложенности. - The PowerShell server session is not in a valid state for running nested commands. No nested commands can be run in this session. + Сеанс сервера PowerShell находится в недопустимом состоянии для выполнения вложенных команд. В этой сессии нельзя выполнять вложенные команды. - Cannot invoke a nested command on the remote session because a nested command is already running. + Невозможно выполнить вложенную команду в удаленной сессии, поскольку вложенная команда уже выполняется. - The remote session was unable to invoke command {0} with error: {1}. + Удалённая сессия не смогла выполнить команду {0} с ошибкой: {1} . - The remote session command is currently stopped in the debugger. Use the Enter-PSSession cmdlet to connect interactively to the remote session and automatically enter into the console debugger. + В данный момент выполнение команды удаленной сессии остановлено в отладчике. Используйте командлет Enter-PSSession для интерактивного подключения к удаленной сессии и автоматического входа в консольный отладчик. - The remote session to which you are connected does not support remote debugging. You must connect to a remote computer that is running PowerShell 4.0 or greater. + Удалённая сессия, к которой вы подключены, не поддерживает удалённую отладку. Необходимо подключиться к удалённому компьютеру, на котором запущена PowerShell версии 4.0 или выше. - Because the session state for session {0}, {1}, {2} is not equal to Open, you cannot run a command in the session. The session state is {3}. + Поскольку состояние сессии {0} , {1} , {2} не равно "Открыто", вы не можете выполнить команду в этой сессии. Состояние сессии — {3} . - No valid sessions were specified. Ensure you provide valid sessions that are in the Opened state and are available to run commands. + Не было указано ни одной действительной сессии. Убедитесь, что вы предоставляете действительные сессии, находящиеся в состоянии "Открыто" и доступные для выполнения команд. - The session {0}, {1}, {2} is not available to run commands. The session availability is {3}. + Сессия {0} , {1} , {2} недоступна для выполнения команд. Доступность сессии: {3} . - The command cannot run because the ChildJobs property is empty. + Команда не может быть выполнена, поскольку свойство ChildJobs пустое. - The job cannot be debugged because there is no PowerShell host debugger available. Make sure you are running this command in a host that supports debugging. + Отладка задания невозможна, поскольку отсутствует доступный отладчик хоста PowerShell. Убедитесь, что вы запускаете эту команду на хосте, поддерживающем отладку. - Cannot find job with id {0}. + Не удалось найти вакансию с идентификатором {0} . - Cannot find job with Instance Id {0}. + Не удается найти задание с идентификатором экземпляра {0} . - Cannot find job with name {0}. + Не удалось найти вакансию с именем {0} . - The job cannot be debugged because there is no host UI available. Make sure you are running this command in a PowerShell host that implements PSHostUserInterface. + Отладка задания невозможна, поскольку отсутствует пользовательский интерфейс хоста. Убедитесь, что вы выполняете эту команду на хосте PowerShell, который реализует интерфейс PSHostUserInterface. - The job cannot be debugged because the host debugger mode is set to None or Default. The host debugger mode must be LocalScript and/or RemoteScript. + Отладка задания невозможна, поскольку режим отладчика хоста установлен на "None" или "Default". В режиме отладки хоста необходимо установить значение LocalScript и/или RemoteScript. - Multiple jobs were found with Id {0}. Debug-Job can debug only one job at a time. + Было найдено несколько вакансий с идентификатором {0} . Debug-Job может отлаживать только одно задание одновременно. - Multiple jobs were found with the name {0}. Debug-Job can debug only one job at a time. + Было найдено несколько вакансий с названием {0} . Debug-Job может отлаживать только одно задание одновременно. - The Named Pipe server listener used for process attach is already running. + Слушатель именованного канала, используемый для подключения процессов, уже запущен. - Enter-PSHostProcess does not support entering the same PowerShell session it is running in. + Команда Enter-PSHostProcess не поддерживает вход в ту же сессию PowerShell, в которой она запущена. - Multiple processes were found with this name {0}. Use the process Id to specify a single process to enter. + Было обнаружено несколько процессов с этим именем {0} . Используйте идентификатор процесса, чтобы указать единственный процесс для входа. - Cannot enter process with Id '{0}' because it has not loaded the PowerShell engine or the named-pipe listener was disabled. + Невозможно войти в процесс с идентификатором ' {0} ', поскольку не загружен механизм PowerShell или прослушиватель именованного канала отключен. - No process was found with Id: {0}. + Не найден процесс с ИД: {0}. - No process was found with Name: {0}. + Не найден процесс с именем: {0}. - No named pipe was found with CustomPipeName: {0}. + Не найден именованный канал с CustomPipeName: {0} . - Cannot process the command because the pipeName specified is too long. Pipe names on this platform can be up to {0} characters long. Your pipe name '{1}' is {2} characters. + Невозможно обработать команду, поскольку указанное имя канала (pipeName) слишком длинное. На этой платформе имена каналов могут содержать до {0} символов. Имя вашего канала ' {1} ' состоит из {2} символов. - The current host does not support the Enter-PSHostProcess cmdlet. + Текущий хост не поддерживает командлет Enter-PSHostProcess. - "The named pipe target process has ended." + "Процесс определения целевого размера трубы завершен". - "The Hyper-V socket target process has ended." + "Процесс обработки целевых сокетов Hyper-V завершен". - {0}[Process:{1}]: {2} + {0} [Процесс: {1} ]: {2} - {0}[{1}]: {2} + {0} [ {1} ]: {2} - Unable to connect to application domain name {0} of process {1}. Error: {2}. + Не удалось подключиться к доменному имени приложения {0} процесса {1} . Ошибка: {2} . - Unable to connect to pipe with name {0}. Error: {1}. + Не удалось подключиться к каналу с именем {0} . Ошибка: {1} . - PowerShell plugin cannot process the Connect operation as required negotiation information is either missing or not complete. + Плагин PowerShell не может обработать операцию подключения, поскольку необходимая информация для согласования либо отсутствует, либо неполна. - PowerShell plugin failed to process to connect operation. + Плагин PowerShell не смог выполнить операцию подключения. - The supplied plugin context is not valid. + Предоставленный контекст плагина недействителен. - Powershell plugin encountered a fatal error while processing {0} arguments. + Плагин PowerShell столкнулся с критической ошибкой при обработке аргументов {0} . - The supplied command context is not valid. + Предоставленный контекст команды недействителен. - The supplied input data is not valid. Only input data of type {0} is supported. + Предоставленные входные данные недействительны. Поддерживаются только входные данные типа {0} . Переданный входной поток недопустим. В качестве потока ввода поддерживается только {0}. @@ -1513,223 +1513,223 @@ Note that 'Start-Job' is not supported by design in scenarios where PowerShell i При регистрации дескриптора ожидания для уведомления о завершении работы в подключаемом модуле PowerShell произошла неустранимая ошибка. - Cannot enter Runspace because a Runspace is already pushed in this session. + Невозможно войти в рабочее пространство, поскольку рабочее пространство уже создано в этой сессии. - Cannot enter Runspace because there is no server remote debugger available. + Невозможно войти в Runspace, поскольку отсутствует доступный удаленный отладчик сервера. - Cannot enter Runspace because it is not a remote Runspace. + Невозможно войти в Runspace, поскольку это не удалённый Runspace. - Remote transport error: {0} + Ошибка удаленной передачи: {0} - Unable to open pipe connection for PowerShell in container. Error code: {0}. + Не удаётся открыть канальное соединение для PowerShell в контейнере. Код ошибки: {0}. - Unable to create PowerShell IPC named pipe. Error code: {0}. + Не удалось создать именованный канал межпроцессного взаимодействия PowerShell. Код ошибки: {0}. - Timeout expired before connection could be made to named pipe. + Истекло время ожидания до того, как удалось установить соединение с именованным каналом. - WSMan Initialization failed with error code: {0}. + Инициализация WSMan завершилась с ошибкой: {0} . - Unable to start named pipe server while in server mode. + Не удаётся запустить сервер именованных каналов в серверном режиме. - Could not grant remote access to '{0}': '{1}'. The session configuration has been registered, but this group does not have access. To resolve this error, provide a valid group name and register the session configuration again. + Не удалось предоставить удаленный доступ к ' {0} ': ' {1} '. Настройки сессии зарегистрированы, но у этой группы нет доступа. Для устранения этой ошибки укажите допустимое имя группы и повторно зарегистрируйте конфигурацию сессии. - Could not get the session capabilities for the session configuration '{0}': this configuration was not registered with a session configuration file (.pssc), such as one created by the New-PSSessionConfigurationFile cmdlet. + Не удалось получить возможности сессии для конфигурации сессии ' {0} ': эта конфигурация не была зарегистрирована в файле конфигурации сессии (.pssc), например, в файле, созданном командлетом New-PSSessionConfigurationFile. - Could not resolve username '{0}'. Verify the username and try again. + Не удалось разрешить имя пользователя ' {0} '. Проверьте имя пользователя и попробуйте снова. - Groups associated with machine's (virtual) administrator account + Группы, связанные с учетной записью (виртуального) администратора машины - Cannot create or open the configuration session {0}. + Невозможно создать или открыть сессию конфигурации {0} . - Enforces script input parameter validation. This is automatically enabled when MountUserDrive is specified. + Обеспечивает проверку входных параметров скрипта. Эта функция автоматически включается при указании параметра MountUserDrive. - Creates a 'User' PSDrive in the session for use with Copy-Item when File System provider is not visible. + Создает в сессии пользовательский PSDrive для использования с командой Copy-Item, когда поставщик файловой системы не виден. - The member '{0}' must be a boolean. Change the member to the correct type in the file {1}. + Член ' {0} ' должен быть логическим значением. Измените тип элемента на правильный в файле {1} . - The member '{0}' must be an integer. Change the member to the correct type in the file {1}. + Член ' {0} ' должен быть целым числом. Измените тип элемента на правильный в файле {1} . - Processing the User drive threw an error {0}. + При обработке диска пользователя произошла ошибка {0} . - Optional maximum size in bytes of user drive created with MountUserDrive parameter. Default maximum size for User drive is 50MB. + Дополнительный параметр, определяющий максимальный размер пользовательского диска в байтах, создаваемого с помощью MountUserDrive. По умолчанию максимальный размер пользовательского диска составляет 50 МБ - Cannot find the file system provider. + Не удаётся найти поставщика файловой системы. - Group managed service account name under which the configuration will run + Имя групповой учетной записи службы, от имени которой будет выполняться конфигурация - Invalid Group Managed Service account name. Account name must be of the form 'DomainName\UserName'. + Недопустимое имя учетной записи управляемой группы служб. Имя учетной записи должно иметь формат 'DomainName\UserName'. - Group accounts for which membership is required to use the session. + Для использования сессии необходимы групповые учетные записи, для которых требуется членство. - Cannot parse sddl string because it contains mismatched parentheses: {0}. + Невозможно разобрать строку sddl, поскольку она содержит несовпадающие скобки: {0} . - RequiredGroups property hashtable must contain only a single key. + Хэш-таблица свойства RequiredGroups должна содержать только один ключ. - The RequiredGroups property is not in a name/value pair hashtable format. This must be a hashtable of the form (using PowerShell syntax): RequiredGroups = @{ Or = 'Administrators' }. + Свойство RequiredGroups не представлено в формате хэш-таблицы, состоящей из пар "имя/значение". Это должна быть хэш-таблица следующего вида (используя синтаксис PowerShell): RequiredGroups = @{ Or = 'Administrators' }. - Unknown key in Required Groups configuration. Required Groups hashtable can only contain 'And' and 'Or' hash keys for logical membership groupings. + Неизвестный ключ в конфигурации "Обязательные группы". Хэш-таблица Required Groups может содержать только хэш-ключи типа "И" и "ИЛИ" для логических группировок участников. - Unknown value in Required Groups configuration. Required Groups hashtable can only contain values that are either group names or another logical hashtable. + Неизвестное значение в конфигурации "Обязательные группы". Обязательные хэш-таблицы групп могут содержать только значения, являющиеся либо именами групп, либо другой логической хэш-таблицей. - Malformed ACE {0}. Regular ACEs must have exactly 6 sections. + Неправильно сформированный ACE {0} . Стандартная программа ACE должна состоять ровно из 6 разделов. - Cannot create a session User Drive because the current user name contains invalid file path characters. + Невозможно создать сессию на пользовательском диске, поскольку имя текущего пользователя содержит недопустимые символы пути к файлу. - Invalid role capability key: {0}. Make sure the role capability name is spelled correctly and is a valid session configuration property. + Недопустимый ключ возможностей роли: {0} . Убедитесь, что имя возможности роли написано правильно и является допустимым свойством конфигурации сессии. - Invalid role capability key type: {0}. Role capability keys must be strings that identify a valid session configuration property. + Недопустимый тип ключа возможностей роли: {0} . Ключи прав доступа к ролям должны представлять собой строки, идентифицирующие допустимое свойство конфигурации сессии. - Invalid role key type: {0}. Role keys must be strings that identify a security group. + Недопустимый тип ключа роли: {0} . Ключи ролей должны представлять собой строки, идентифицирующие группу безопасности. - Other Possible Cause: - -The domain or computer name was not included with the specified credential, for example: DOMAIN\UserName or COMPUTER\UserName. + Другая возможная причина: + - В указанных учетных данных не указано имя домена или компьютера, например: DOMAIN\UserName или COMPUTER\UserName. - Failed to start the SSH client process needed for the remoting connection with error: {0}. + Не удалось запустить процесс SSH-клиента, необходимый для удаленного подключения, с ошибкой: {0} . - The specified key file {0} was not found. + Указанный ключевой файл {0} не найден. - The SSH client session has ended with error message: {0} + Сеанс SSH-клиента завершился с сообщением об ошибке: {0} - SSH connection attempt failed after time out: {0} seconds. + Попытка подключения по SSH завершилась неудачей по истечении времени ожидания: {0} секунд. -SSH client process terminated before connection could be established. +Процесс SSH-клиента завершился до того, как удалось установить соединение. - The provided SSHConnection hashtable is missing the required ComputerName or HostName parameter. + В предоставленной хэш-таблице SSHConnection отсутствует обязательный параметр ComputerName или HostName. - The provided SSHConnection hashtable parameter name or element is null or empty. + Указанное имя параметра или элемент хэш-таблицы SSHConnection имеет значение null или пуст. - The provided SSHConnection hashtable parameter {0} is not supported. + Предоставленный параметр хэш-таблицы SSHConnection {0} не поддерживается. - The provided SSHConnection hashtable contains both a ComputerName and HostName parameter. Only one can be specified. + Предоставленная хэш-таблица SSHConnection содержит параметры ComputerName и HostName. Можно указать только один вариант. - The provided SSHConnection hashtable contains both a KeyFilePath and IdentityFilePath parameter. Only one can be specified. + Предоставленная хэш-таблица SSHConnection содержит параметры KeyFilePath и IdentityFilePath. Можно указать только один вариант. - Could not find the provided role capability file {0}. + Не удалось найти предоставленный файл возможностей роли {0} . - The provided role capability file {0} does not have the required .psrc extension. + Предоставленный файл возможностей роли {0} не имеет необходимого расширения .psrc. - The SSH transport process has abruptly terminated causing this remote session to break. + Процесс передачи данных по протоколу SSH внезапно завершился, что привело к разрыву удаленного сеанса. - PowerShell 6+ does not support WOW64. The binary must match the architecture of the processor. + PowerShell 6+ не поддерживает WOW64. Двоичный файл должен соответствовать архитектуре процессора. Не удалось найти исполняемый файл {0}. Убедитесь, что установлена функция WOW64. - Unable to install plugin {0} to directory {1}. + Не удалось установить плагин {0} в каталог {1} . - The WinRM plugin DLL {0} is missing for PowerShell. Please run Enable-PSRemoting and then retry this command. + Отсутствует DLL-файл плагина WinRM {0} для PowerShell. Выполните команду Enable-PSRemoting, а затем повторите эту команду. - This parameter set requires WSMan, and no supported WSMan client library was found. WSMan is either not installed or unavailable for this system. + Для этого набора параметров требуется WSMan, и поддерживаемая клиентская библиотека WSMan не найдена. WSMan либо не установлен, либо недоступен для данной системы. - Exit code: {0} - Stdout: '{1}' - Stderr: '{2}' + Код выхода: {0} + Стандартный вывод: ' {1} ' + Stderr: ' {2} ' - Information about the process could not be read: '{0}'. + Информация о процессе не может быть прочитана: ' {0} '. - Host system does not have the correct version of Hyper-V schema. + В хост-системе отсутствует правильная версия схемы Hyper-V. - HTTPS on Unix does not currently support CA or CN checks. Use the PSSessionOption -SkipCACheck and -SkipCNCheck if you are certain you trust the server you are connecting to and the network in between. + В настоящее время HTTPS в Unix не поддерживает проверку CA или CN. Используйте параметры PSSessionOption -SkipCACheck и -SkipCNCheck, если вы уверены в доверии к серверу, к которому подключаетесь, и к сети между ними. - PowerShell remoting has been disabled only for PowerShell 6+ configurations and does not affect Windows PowerShell remoting configurations. Run this cmdlet in Windows PowerShell to affect all PowerShell remoting configurations. + Функция удаленного доступа PowerShell отключена только для конфигураций PowerShell 6+ и не затрагивает конфигурации удаленного доступа Windows PowerShell. Запустите этот командлет в Windows PowerShell, чтобы применить его ко всем настройкам удаленного доступа PowerShell. - PowerShell remoting has been enabled only for PowerShell 6+ configurations and does not affect Windows PowerShell remoting configurations. Run this cmdlet in Windows PowerShell to affect all PowerShell remoting configurations. + Функция удаленного доступа PowerShell включена только для конфигураций PowerShell 6+ и не затрагивает конфигурации удаленного доступа Windows PowerShell. Выполните этот командлет в Windows PowerShell, чтобы применить его ко всем настройкам удаленного доступа PowerShell. - Enter-PSHostProcess cmdlet is disabled because an application control policy such as 'AppLocker' or 'Windows Defender Application Control' is in enforcement. + Командлет Enter-PSHostProcess отключен, поскольку применяется политика контроля приложений, такая как 'AppLocker' или 'Windows Defender Application Control'. - Remote debugger exception: {0}, error message: {1} + Исключение удаленного отладчика: {0} , сообщение об ошибке: {1} Не удается создать процесс Windows PowerShell, так как Windows PowerShell не найден на этом компьютере. - The Runspace argument to Create must be a non-null RemoteRunspace object. + Аргумент Runspace в функции Create должен представлять собой ненулевой объект RemoteRunspace. - The session configuration hash table contains an invalid key type. Keys should be string types. + Хэш-таблица конфигурации сессии содержит недопустимый тип ключа. Ключи должны быть строкового типа. - The session configuration file contains an unsupported configuration option: {0}. This is a remoting endpoint configuration option, that does not apply to PowerShell session state. + Файл конфигурации сессии содержит неподдерживаемый параметр конфигурации: {0} . Это параметр конфигурации удаленной конечной точки, который не применяется к состоянию сеанса PowerShell. - The session configuration file contains an unknown configuration option: {0}. + Файл конфигурации сессии содержит неизвестный параметр конфигурации: {0} . - Expression Evaluation May Fail + Оценка выразительности может оказаться неудачной - Creating a PowerShell object from a script block may require evaluating some expressions within the script block. The expression evaluation will silently fail and return 'null' in Constrained Language mode, unless the expression represents a constant value. + Для создания объекта PowerShell из блока скрипта может потребоваться оценка некоторых выражений внутри этого блока. В режиме ограниченного языка вычисление выражения завершится без предупреждения и вернет значение 'null', если только выражение не представляет собой константу. - Failed to get Hyper-V VM State. The value was of the type {0} but was expected to be Microsoft.HyperV.PowerShell.VMState or System.String. + Не удалось получить состояние виртуальной машины Hyper-V. Значение имело тип {0} , но ожидалось, что оно будет Microsoft.HyperV.PowerShell.VMState или System.String. - Hyper-V {0} sent an invalid {1} response during the connection negotiation. + Hyper-V {0} отправил недействительный {1} ответ во время согласования соединения. - Negotiating a secure connection to Hyper-V failed. Make sure the Host and Guest are updated with all relevant Microsoft Updates. + Не удалось установить защищенное соединение с Hyper-V. Убедитесь, что и хост, и гость обновлены до всех соответствующих версий Майкрософт. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/ru/RunspaceInit.ru.resx b/src/System.Management.Automation/resources/ru/RunspaceInit.ru.resx index acfb5605bb6..ccd6e73c5b6 100644 --- a/src/System.Management.Automation/resources/ru/RunspaceInit.ru.resx +++ b/src/System.Management.Automation/resources/ru/RunspaceInit.ru.resx @@ -118,114 +118,114 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Variable to hold the enabled experimental feature names + Переменная для хранения имен включенных экспериментальных функций - Parent folder of the host application of the current runspace + Родительская папка ведущего приложения текущего пространства выполнения - Folder containing the current user's profile + Папка, содержащая профиль текущего пользователя - A reference to the host of the current runspace + Ссылка на узел текущего пространства выполнения - The run objects available to cmdlets + Объекты выполнения, доступные для командлетов - Version information for current PowerShell session + Сведения о версии текущего сеанса PowerShell - Current process ID + ИД текущего процесса - Status of last command + Состояние последней команды - Parent process ID + Идентификатор родительского процесса - The ShellID identifies the current shell. This is used by #Requires. + ShellID идентифицирует текущую оболочку. Используется #Requires. - Name of the current console file + Имя текущего файла консоли - The text encoding used when piping text to a native executable file + Кодировка текста, используемая при передаче текста в исполняемый файл через конвейер - The text encoding used when reading output text from a native executable file + Кодировка текста, используемая при чтении выходных данных собственного исполняемого файла - Configuration controlling how text is rendered. + Конфигурация, определяющая способ отрисовки текста. - Variable to contain the name of the email server. This can be used instead of the HostName parameter in the Send-MailMessage cmdlet. + Переменная, содержащая имя почтового сервера. Ее можно использовать вместо параметра HostName в командлете Send-MailMessage. - Dictates when confirmation should be requested. Confirmation is requested when the ConfirmImpact of the operation is equal to or greater than $ConfirmPreference. If $ConfirmPreference is None, actions will only be confirmed when Confirm is specified. + Определяет, когда следует запрашивать подтверждение. Подтверждение запрашивается, если ConfirmImpact операции равен или превышает $ConfirmPreference. Если $ConfirmPreference имеет значение None, действия будут подтверждаться только при указании параметра Confirm. - Dictates the action taken when a Debug message is delivered + Определяет действие, выполняемое при получении отладочного сообщения - Dictates the action taken when an error message is delivered + Определяет действие, выполняемое при получении сообщения об ошибке - Dictates the action taken when progress records are delivered + Определяет действие, выполняемое при получении записей о ходе выполнения - Dictates the action taken when a Verbose message is delivered + Определяет действие, выполняемое при получении подробного сообщения - Dictates the action taken when a Warning message is delivered + Определяет действие, выполняемое при получении сообщения с предупреждением - Dictates the action taken when a command generates an item in the Information stream + Определяет действие, выполняемое при создании командой элемента в информационном потоке - Dictates the view mode to use when displaying errors + Определяет режим просмотра, используемый при показе ошибок - Dictates what type of prompt should be displayed for the current nesting level + Определяет, какой тип запроса должен отображаться для текущего уровня вложенности - If true, $ErrorActionPreference applies to native executables, so that non-zero exit codes will generate cmdlet-style errors governed by error action settings + Если значение true, $ErrorActionPreference применяется и к собственным исполняемым файлам: ненулевые коды завершения будут приводить к возникновению ошибок в стиле командлетов, поведение которых определяется настройками реакции на ошибки - If true, WhatIf is considered to be enabled for all commands. + Если значение равно true, параметр WhatIf считается включенным для всех команд. - Dictates how arguments are passed to native executables. + Определяет, как аргументы передаются собственным исполняемым файлам. - Dictates the limit of enumeration on formatting IEnumerable objects + Задает ограничение на количество элементов при перечислении в процессе форматирования объектов IEnumerable - Displays errors with a stack trace + Отображает ошибки с трассировкой стека - Displays errors with inner exceptions + Отображает ошибки с внутренними исключениями - Displays errors with their sources + Отображает ошибки с их источниками - Displays errors with a description of the error class + Отображает ошибки с описанием класса ошибки - Culture of the current PowerShell session + Язык и региональные параметры текущего сеанса PowerShell - UI culture of the current PowerShell session + Язык и региональные параметры пользовательского интерфейса текущего сеанса PowerShell - Variable to hold all default <cmdlet:parameter, value> pairs + Переменная для хранения всех пар значений по умолчанию <cmdlet:parameter, value> - Press Enter to continue... + Нажмите клавишу ВВОД, чтобы продолжить... - Edition information for the current PowerShell session + Сведения о выпуске для текущего сеанса PowerShell \ No newline at end of file diff --git a/src/System.Management.Automation/resources/tr/MiniShellErrors.tr.resx b/src/System.Management.Automation/resources/tr/MiniShellErrors.tr.resx index b7d2e849e72..17fd495c705 100644 --- a/src/System.Management.Automation/resources/tr/MiniShellErrors.tr.resx +++ b/src/System.Management.Automation/resources/tr/MiniShellErrors.tr.resx @@ -118,9 +118,9 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The update is not supported for the runspace configuration category {0}. + Güncelleştirme, çalışma alanı yapılandırma kategorisi {0} için desteklenmiyor. - The following errors occurred when updating the assembly list for the runspace: {0}. + Çalışma alanı için bütünleştirilmiş kod listesini güncelleştirirken aşağıdaki hatalar oluştu: {0}. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/tr/RunspaceInit.tr.resx b/src/System.Management.Automation/resources/tr/RunspaceInit.tr.resx index acfb5605bb6..2782e7f414a 100644 --- a/src/System.Management.Automation/resources/tr/RunspaceInit.tr.resx +++ b/src/System.Management.Automation/resources/tr/RunspaceInit.tr.resx @@ -118,114 +118,114 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Variable to hold the enabled experimental feature names + Etkin deneysel özellik adlarını tutacak değişken - Parent folder of the host application of the current runspace + Geçerli çalışma alanının konak uygulamasının üst klasörü - Folder containing the current user's profile + Geçerli kullanıcının profilini içeren klasör - A reference to the host of the current runspace + Geçerli runspace'in ana makinesine yapılan bir başvuru - The run objects available to cmdlets + Cmdlet'ler için kullanılabilen çalıştırma nesneleri - Version information for current PowerShell session + Geçerli Windows PowerShell oturumu için sürüm bilgisi - Current process ID + Geçerli işlem kimliği - Status of last command + Son komutun durumu - Parent process ID + Üst işlem kimliği - The ShellID identifies the current shell. This is used by #Requires. + ShellID, geçerli kabuğu tanımlar. Bu, #Requires tarafından kullanılır. - Name of the current console file + Geçerli konsol dosyasının adı - The text encoding used when piping text to a native executable file + Yerel yürütülebilir dosyaya metin aktarılırken kullanılan metin kodlaması - The text encoding used when reading output text from a native executable file + Yerel yürütülebilir dosyadan çıktı metnini okurken kullanılan metin kodlaması - Configuration controlling how text is rendered. + Metnin nasıl oluşturulacağını denetleyen yapılandırma - Variable to contain the name of the email server. This can be used instead of the HostName parameter in the Send-MailMessage cmdlet. + E-posta sunucusunun adını tutacak değişken. Bu, Send-MailMessage cmdlet'inde HostName parametresi yerine kullanılabilir. - Dictates when confirmation should be requested. Confirmation is requested when the ConfirmImpact of the operation is equal to or greater than $ConfirmPreference. If $ConfirmPreference is None, actions will only be confirmed when Confirm is specified. + Onay istenmesinin ne zaman yapılacağını belirler. İşlemin ConfirmImpact değeri $ConfirmPreference değerine eşit veya ondan büyük olduğunda onay istenir. $ConfirmPreference None ise, eylemler yalnızca Confirm belirtildiğinde onaylanır. - Dictates the action taken when a Debug message is delivered + Hata ayıklama iletisi teslim edildiğinde yapılacak eylemi belirler - Dictates the action taken when an error message is delivered + Bir hata iletisi teslim edildiğinde yapılacak eylemi belirler - Dictates the action taken when progress records are delivered + İlerleme kayıtları teslim edildiğinde yapılacak eylemi belirler - Dictates the action taken when a Verbose message is delivered + Ayrıntılı ileti teslim edildiğinde yapılacak eylemi belirler - Dictates the action taken when a Warning message is delivered + Bir Warning iletisi teslim edildiğinde alınacak eylemi belirler - Dictates the action taken when a command generates an item in the Information stream + Bir komut Bilgi akışında bir öğe oluşturduğunda yapılacak eylemi belirler - Dictates the view mode to use when displaying errors + Hatalar görüntülenirken kullanılacak görünüm modunu belirler - Dictates what type of prompt should be displayed for the current nesting level + Geçerli iç içe yerleştirme düzeyi için hangi tür istemin görüntüleneceğini belirler - If true, $ErrorActionPreference applies to native executables, so that non-zero exit codes will generate cmdlet-style errors governed by error action settings + True ise $ErrorActionPreference yerel yürütülebilir dosyalara uygulanır. Böylece sıfır olmayan çıkış kodları, hata eylemi ayarları tarafından yönetilen cmdlet tarzı hatalar oluşturur. - If true, WhatIf is considered to be enabled for all commands. + Doğruysa, WhatIf tüm komutlar için etkin kabul edilir. - Dictates how arguments are passed to native executables. + Yerel yürütülebilir dosyalara bağımsız değişkenlerin nasıl geçirileceğini belirler. - Dictates the limit of enumeration on formatting IEnumerable objects + Biçimlendirilmiş IEnumerable nesneleri üzerinde numaralandırma sınırını belirler - Displays errors with a stack trace + Hataları yığın izlemesiyle görüntüler - Displays errors with inner exceptions + İç özel durumlarla hataları görüntüler - Displays errors with their sources + Kaynaklarıyla birlikte hataları görüntüler - Displays errors with a description of the error class + Hata sınıfının açıklamasıyla hataları görüntüler - Culture of the current PowerShell session + Geçerli Windows PowerShell oturumunun kültürü - UI culture of the current PowerShell session + Geçerli Windows PowerShell oturumunun kullanıcı arabirimi kültürü - Variable to hold all default <cmdlet:parameter, value> pairs + Tüm varsayılan <cmdlet:parameter, value> çiftlerini tutacak değişken - Press Enter to continue... + Devam etmek için Enter tuşuna basın... - Edition information for the current PowerShell session + Geçerli Windows PowerShell oturumu için sürüm bilgisi \ No newline at end of file diff --git a/src/System.Management.Automation/resources/zh-Hans/GetErrorText.zh-Hans.resx b/src/System.Management.Automation/resources/zh-Hans/GetErrorText.zh-Hans.resx index a4acd582337..5f280a7392f 100644 --- a/src/System.Management.Automation/resources/zh-Hans/GetErrorText.zh-Hans.resx +++ b/src/System.Management.Automation/resources/zh-Hans/GetErrorText.zh-Hans.resx @@ -118,30 +118,30 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot load a resource with base name "{0}". + 无法加载基名称为 "{0}" 的资源。 - Cannot load a resource string with ID "{0}". + 无法加载 ID 为 "{0}" 的资源字符串。 - Running commands is prevented by Stop policy settings. + Stop 策略设置会阻止运行命令。 - Cannot retrieve the message "{0}" "{1}" "{2}" because an assembly was not registered. + 无法检索消息 "{0}" "{1}" "{2}"，因为未注册程序集。 - Cannot retrieve the message "{0}" "{1}" "{2}". A template string format is not valid in template string "{3}". + 无法检索消息 "{0}" "{1}" "{2}"。模板字符串 "{3}" 中的模板字符串格式无效。 - Cannot retrieve the message "{0}" "{1}" "{2}". A template string exists, but its value is empty or blank. + 无法检索消息 "{0}" "{1}" "{2}"。模板字符串存在，但其值为空或空白。 - The pipeline has been stopped. + 管道已停止。 - The script failed due to call depth overflow. + 由于调用深度溢出，脚本失败。 - The pipeline failed due to call depth overflow. + 由于调用深度溢出，管道失败。 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/zh-Hans/HelpDisplayStrings.zh-Hans.resx b/src/System.Management.Automation/resources/zh-Hans/HelpDisplayStrings.zh-Hans.resx index f935574ac9a..c682bb32c5c 100644 --- a/src/System.Management.Automation/resources/zh-Hans/HelpDisplayStrings.zh-Hans.resx +++ b/src/System.Management.Automation/resources/zh-Hans/HelpDisplayStrings.zh-Hans.resx @@ -121,172 +121,172 @@ 名称 - SYNOPSIS + 摘要 - DESCRIPTION + 说明 - SYNTAX + 语法 - PARAMETERS + 参数 - INPUTS + 输入 - OUTPUTS + 输出 - TERMINATING ERRORS + 终止错误 - NON-TERMINATING ERRORS + 非终止错误 - NOTES + 备注 - EXAMPLES + 示例 示例 - EXAMPLE + 示例 - OUTPUT + 输出 - RELATED LINKS + 相关链接 - SHORT DESCRIPTION + 简短说明 - Title: + 标题: - Question: + 问题: 答案 - Term: + 期限: - Definition: + 定义: - Content: + 内容: - PROVIDER NAME + 提供程序名称 - This cmdlet supports the common parameters: Verbose, Debug, - ErrorAction, ErrorVariable, WarningAction, WarningVariable, - OutBuffer, PipelineVariable, and OutVariable. For more information, see - about_CommonParameters (https://go.microsoft.com/fwlink/?LinkID=113216). + 此 cmdlet 支持以下常见参数: Verbose、Debug、 + ErrorAction、ErrorVariable、WarningAction、WarningVariable、 + OutBuffer、PipelineVariable 和 OutVariable。有关详细信息，请参见 + about_CommonParameters (https://go.microsoft.com/fwlink/?LinkID=113216)。 - Required? + 必需? - Position? + 位置? - Type: + 类型: - Target Object Type: + 目标对象类型: - Default value + 默认值 - Accept pipeline input? + 接受管道输入? - Accept wildcard characters? + 接受通配符? - (Category: + (类别: - Suggested Action: + 建议的操作: - For more information, type: + 有关详细信息，请输入: - For technical information, type: + 要查看技术信息，请输入: - To see the examples, type: + 若要查看示例，请输入: - For online help, type: + 有关联机帮助，请输入: <CommonParameters> - REMARKS + 备注 true - Named + 已命名 - DRIVES + 驱动器 - CAPABILITIES + 功能 - TASKS + 任务 - TASK: + 任务: - FILTERS + 筛选器 - DYNAMIC PARAMETERS + 动态参数 - Cmdlets Supported: + 支持的 cmdlet: - ALIASES + 别名 - Get-Help cannot find the Help files for this cmdlet on this computer. It is displaying only partial help. - -- To download and install Help files for the module that includes this cmdlet, use Update-Help. - -- To view the Help topic for this cmdlet online, type: "Get-Help {0} -Online" or - go to {1}. + Get-Help 在这台计算机上找不到此 cmdlet 的帮助文件。它只显示部分帮助内容。 + -- 若要下载并安装包含此 cmdlet 的模块的帮助文件，请使用 Update-Help。 + -- 若要联机查看此 cmdlet 的帮助主题，请输入 "Get-Help {0} -Online" 或 + 转到 {1}。 无 - Aliases + 别名 - Dynamic? + 动态? - Parameter set name + 参数集名称 - Unable to retrieve the HelpInfo XML file for UI culture {0}. Make sure the HelpInfoUri property in the module manifest is valid or check your network connection and then try the command again. + 无法检索 UI 区域性 {0} 的 HelpInfo XML 文件。请确保模块清单中的 HelpInfoUri 属性有效，或检查网络连接，然后重试该命令。 ByPropertyName @@ -298,176 +298,176 @@ FromRemainingArguments - The specified culture is not supported: {0}. Specify a culture from the following list: {{{1}}}. + 不支持指定的区域性: {0}。请从以下列表中指定一个区域性: {{{1}}}。 - Postponing error and trying fallback cultures, will show as error if none of fallbacks are supported: + 推迟错误并尝试回退区域性，如果没有任何回退受支持，将显示为错误: {0} - The ModuleBase directory cannot be found. Verify the directory and try again. + 找不到 ModuleBase 目录。请验证该目录，然后重试。 - The path {0} is not a valid directory. Make sure the directory exists and retry. + 路径 {0} 不是有效的目录。请确保目录存在，然后重试。 - A Help URI cannot contain more than 10 redirections. Specify a valid Help URI. + Help URI 不能包含超过 10 次重定向。请指定有效的 Help URI。 - Updating Help + 更新帮助 - Connecting to Help Content... + 正在连接到帮助内容... - Downloading Help Content... + 正在下载帮助内容... - Installing Help content... + 正在安装帮助内容... - Locating Help Content... + 正在查找帮助内容... - (All) + (全部) - No PowerShell modules were found that match the following pattern: {0}. Verify the pattern and then try the command again. + 找不到与以下模式匹配的 PowerShell 模块: {0}。验证模式，然后重试该命令。 - No PowerShell modules were found that match the specified FullyQualifiedModule {0}. Verify the FullyQualifiedModule value and then try the command again. + 找不到与指定的 FullyQualifiedModule {0} 匹配的 PowerShell 模块。请验证 FullyQualifiedModule 值，然后重试该命令。 - Help content cannot be found. Make sure the server is available and the help content location is properly defined in the HelpInfo XML. + 找不到帮助内容。请确保服务器可用，并且在 HelpInfo XML 中正确定义了帮助内容的位置。 - The Update-Help command failed because the specified module does not support updatable help. Use Get-Help -Online or look online for help for the commands in this module. + Update-Help 命令失败，因为指定的模块不支持可更新帮助。请使用 Get-Help -Online 或联机查找针对该模块中命令的帮助。 - The following parameter must not be null or empty: Module. + 以下参数不能为空或留空: Module。 - The following parameter must not be null or empty: Path. + 以下参数不能为空或留空: Path。 - Update-Help has completed successfully. + 已成功完成 Update-Help。 - Error extracting Help content. + 提取帮助内容时出错。 - Unable to connect to Help content. The server on which Help content is stored might not be available. Verify that the server is available, or wait until the server is back online, and then try the command again. + 无法连接到帮助内容。存储帮助内容的服务器可能不可用。请验证服务器是否可用，或等到服务器重新联机，然后重试该命令。 - The Help content at the specified location is not valid. Specify a location that contains valid Help Content. + 指定位置处的帮助内容无效。请指定包含有效帮助内容的位置。 - The HelpInfo XML is not valid. Specify valid HelpInfo XML. + HelpInfo XML 无效。请指定有效的 HelpInfo XML。 - Help content was successfully saved to the following location: {0} + 帮助内容已成功保存到以下位置: {0} - The Help content XSD file cannot be found in {0}. Verify that the XSD file exists at the specified location, and then retry the command. + 在 {0} 中找不到帮助内容 XSD 文件。请验证 XSD 文件是否存在于指定位置上，然后重试该命令。 - Failed to update Help for the module(s) : -'{0}' + 未能更新模块的帮助: +"{0}" {1} - Saving Help + 正在保存帮助 - Help content contains files that are not valid. Only .txt and .xml files are supported. + 帮助内容包含无效文件。仅支持 .txt 和 .xml 文件。 - Failed to save Help for the module(s) '{0}' : {1} + 未能保存模块 "{0}" 的帮助: {1} - Failed to save Help for the module(s) '{0}' with UI culture(s) {{{1}}} : {2}. -English-US help content is available and can be saved using: Save-Help -UICulture en-US. + 未能为具有 UI 区域性 {{{1}}} 的模块 "{0}" 保存帮助: {2}。 +英语-美国帮助内容可用，可以使用以下命令保存: Save-Help -UICulture en-US。 - Failed to update Help for the module(s) '{0}' with UI culture(s) {{{1}}} : {2}. -English-US help content is available and can be installed using: Update-Help -UICulture en-US. + 未能为具有 UI 区域性 {{{1}}} 的模块 "{0}" 更新帮助: {2}。 +英语-美国帮助内容可用，可以使用以下命令安装: Update-Help -UICulture en-US。 - Your current culture is ({0}), which is not associated with any language, consider changing your system culture or install the English-US help content using: Update-Help -UICulture en-US. + 当前区域性为({0})，未与任何语言关联。请考虑更改系统区域性，或使用以下命令安装英语-美国帮助内容: Update-Help -UICulture en-US。 false - The -Recurse parameter is only available if a source path is specified. + 只有在指定源路径时，才能使用 -Recurse 参数。 - The path {0} does not contain a FileSystem provider. Verify that the specified path contains the FileSystem provider, and then retry the command. + 路径 {0} 不包含 FileSystem 提供程序。请验证指定的路径是否包含 FileSystem 提供程序，然后重试该命令。 - Searching Help for {0} ... + 正在搜索 {0} 帮助... - No UI culture was found that matches the following pattern: {0}. Verify the pattern and then try the command again. + 找不到与以下模式匹配的 UI 区域性: {0}。验证模式，然后重试该命令。 - Help was not saved for the module {0}, because the Save-Help command was run on this computer within the last 24 hours. -To save help again, add the Force parameter to your command. + 未保存模块 {0} 的帮助，因为此计算机在最近 24 小时内已运行过 Save-Help 命令。 +若要再次保存帮助，请在命令中添加 Force 参数。 - Help was not updated for the module {0}, because the Update-Help command was run on this computer within the last 24 hours. -To update help again, add the Force parameter to your command. + 未更新模块 {0} 的帮助，因为此计算机在最近 24 小时内已运行过 Update-Help 命令。 +若要再次更新帮助，请在命令中添加 Force 参数。 - The most current Help files are already installed. + 已安装最新的帮助文件。 - {0}: {1}. Culture {2} Version {3} + {0}: {1}。区域性 {2} 版本 {3} - Updated {0} + 更新时间 {0} - The value of the HelpInfoUri key in the module manifest must resolve to a container or root URL on a website where the help files are stored. The HelpInfoUri '{0}' does not resolve to a container. + 模块清单中的 HelpInfoUri 键值必须解析为网站上存储帮助文件的容器或根 URL。HelpInfoUri "{0}" 未解析为容器。 - Help content must be in the namespace {0}. + 帮助内容必须位于命名空间 {0} 中。 - Get-Help cannot find the Help files for this cmdlet on this computer. It is displaying only partial help. - -- To download and install Help files for the module that includes this cmdlet, use Update-Help. + Get-Help 在这台计算机上找不到此 cmdlet 的帮助文件。它只显示部分帮助内容。 + -- 若要下载并安装包含此 cmdlet 的模块的帮助文件，请使用 Update-Help。 - The most current Help files are already downloaded. + 已下载最新的帮助文件。 - Saved {0} + 已保存 {0} - The HelpInfoURI {0} does not start with HTTP. + HelpInfoURI {0} 不以 HTTP 开头。 - The root level element of the help content must be "helpItems". + 帮助内容的根级元素必须是 "helpItems"。 - Saving Help for module {0} + 正在保存模块 {0} 的帮助 - Updating Help for module {0} + 正在更新模块 {0} 的帮助 - Resolving URI: "{0}" + 正在解析 URI: "{0}" - Help URI: {0} + 帮助 URI: {0} - {0}, Current Version: {1}, Available Version: {2}, UICulture: {3} + {0}，当前版本: {1}，可用版本: {2}，UICulture: {3} - PROPERTIES + 属性 - METHODS + 方法 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/zh-Hans/InternalHostUserInterfaceStrings.zh-Hans.resx b/src/System.Management.Automation/resources/zh-Hans/InternalHostUserInterfaceStrings.zh-Hans.resx index 19396dacc2c..2fdaee4c901 100644 --- a/src/System.Management.Automation/resources/zh-Hans/InternalHostUserInterfaceStrings.zh-Hans.resx +++ b/src/System.Management.Automation/resources/zh-Hans/InternalHostUserInterfaceStrings.zh-Hans.resx @@ -118,106 +118,106 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - WriteDebug stopped because the value of the DebugPreference variable was 'Stop'. + 由于 DebugPreference 变量的值为 "Stop"，WriteDebug 已停止。 - The value {0} is not a supported ActionPreference value. + 值 {0} 不是受支持的 ActionPreference 值。 - The "{0}" parameter must contain at least one value. + "{0}" 参数必须至少包含一个值。 - &Yes + 是(&Y) - Continue. + 继续。 - Yes to &All + 全为是(&A) - Continue, and do not ask again whether to continue in this session. + 继续，并且不要再询问是否在此会话中继续。 - &No + 否(&N) - End the operation with an error. + 结束操作是出错。 - No to A&ll + 全为否(&L) - End the operation with an error. Do not request to resume operation for this session. + 结束操作是出错。请勿请求恢复此会话中的操作。 - &Suspend + 暂停(&S) - Pause the current operation and enter a command prompt. Type "exit" to resume the paused operation. + 暂停当前操作并进入命令提示符。键入 "exit" 以恢复已暂停的操作。 - Continue with this operation? + 继续执行此操作? - (default is "{0}") + (默认值为“{0}”) - (default choices are {0}) + (默认选项为 {0}) - Choice[{0}]: + Choice[{0}]: - "{0}" should have at least one element. + “{0}”应包含至少一个元素。 - "{0}" must be a valid index into "{1}". "{2}" is not a valid index. + “{0}”必须是“{1}”的有效索引。“{2}”不是有效索引。 - Cannot process the hot key because a question mark ("?") cannot be used as a hot key. + 无法处理热键，因为问号("?")不能用作热键。 - VERBOSE: {0} + 详细信息: {0} - WARNING: {0} + 警告: {0} - DEBUG: {0} + 调试: {0} - The host is not currently transcribing. + 主机当前未在进行转录。 - Command start time: {0} + 命令开始时间: {0} ********************** -PowerShell transcript start -Start time: {0:yyyyMMddHHmmss} -Username: {1} -RunAs User: {2} -Configuration Name: {3} -Machine: {4} ({5}) -Host Application: {6} -Process ID: {7} +PowerShell 记录开始 +开始时间: {0:yyyyMMddHHmmss} +用户名: {1} +RunAs 用户: {2} +配置名称: {3} +计算机: {4} ({5}) +主机应用程序: {6} +进程 ID: {7} {8} ********************** ********************** -PowerShell transcript start -Start time: {0:yyyyMMddHHmmss} +PowerShell 记录开始 +开始时间: {0:yyyyMMddHHmmss} ********************** ********************** -PowerShell transcript end -End time: {0:yyyyMMddHHmmss} +PowerShell 记录结束 +结束时间: {0:yyyyMMddHHmmss} ********************** - File path {0} resolves to a directory. + 文件路径 "{0}" 解析为目录。 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/zh-Hans/MiniShellErrors.zh-Hans.resx b/src/System.Management.Automation/resources/zh-Hans/MiniShellErrors.zh-Hans.resx index b7d2e849e72..0aa9e30ead2 100644 --- a/src/System.Management.Automation/resources/zh-Hans/MiniShellErrors.zh-Hans.resx +++ b/src/System.Management.Automation/resources/zh-Hans/MiniShellErrors.zh-Hans.resx @@ -118,9 +118,9 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The update is not supported for the runspace configuration category {0}. + 运行空间配置类别“{0}”不支持更新。 - The following errors occurred when updating the assembly list for the runspace: {0}. + 更新运行空间的程序集列表时出现以下错误: {0}。 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/zh-Hans/NativeCP.zh-Hans.resx b/src/System.Management.Automation/resources/zh-Hans/NativeCP.zh-Hans.resx index 0104024c3f5..0c551422c1b 100644 --- a/src/System.Management.Automation/resources/zh-Hans/NativeCP.zh-Hans.resx +++ b/src/System.Management.Automation/resources/zh-Hans/NativeCP.zh-Hans.resx @@ -118,30 +118,30 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - ScriptBlock should only be specified as a value of the Command parameter. + ScriptBlock 只能指定为 Command 参数的值。 - No value was specified for the Command parameter. + 没有为 Command 参数指定值。 - A value that is not valid ({6}) was specified for the {7} parameter. Valid values are Text and Xml. + 为 {7} 参数指定的值无效({6})。有效值为 Text 和 Xml。 - No value was specified for the InputFormat parameter. Valid values are Text and Xml. + 没有为 InputFormat 参数指定值。有效值为 Text 和 Xml。 - No value was specified for the OutputFormat parameter. Valid values are text and XML. + 没有为 OutputFormat 参数指定值。有效值为 text 和 XML。 - The {6} parameter requires a string value. + {6} 参数需要字符串值。 - No value was specified for the Args parameter. + 没有为 Args 参数指定值。 - The {6} parameter was already specified. + {6} 参数已指定。 - Cannot process the XML from the '{0}' stream of '{1}': {2} + 无法处理来自 "{0}" 的 "{1}" 流中的 XML: {2} \ No newline at end of file diff --git a/src/System.Management.Automation/resources/zh-Hans/RunspaceInit.zh-Hans.resx b/src/System.Management.Automation/resources/zh-Hans/RunspaceInit.zh-Hans.resx index acfb5605bb6..3faa250d129 100644 --- a/src/System.Management.Automation/resources/zh-Hans/RunspaceInit.zh-Hans.resx +++ b/src/System.Management.Automation/resources/zh-Hans/RunspaceInit.zh-Hans.resx @@ -118,114 +118,114 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Variable to hold the enabled experimental feature names + 用于保存启用的实验性功能名称的变量 - Parent folder of the host application of the current runspace + 当前运行空间的主机应用程序的父文件夹 - Folder containing the current user's profile + 包含当前用户配置文件的文件夹 - A reference to the host of the current runspace + 对当前运行空间的主机的引用 - The run objects available to cmdlets + cmdlet 可用的运行对象 - Version information for current PowerShell session + 当前 PowerShell 会话的版本信息 - Current process ID + 当前进程 ID - Status of last command + 最后一个命令的状态 - Parent process ID + 父进程 ID - The ShellID identifies the current shell. This is used by #Requires. + ShellID 标识当前 shell。 这由 #Requires 使用。 - Name of the current console file + 当前控制台文件的名称 - The text encoding used when piping text to a native executable file + 将文本传送到本机可执行文件时使用的文本编码 - The text encoding used when reading output text from a native executable file + 从本机可执行文件读取输出文本时使用的文本编码 - Configuration controlling how text is rendered. + 控制文本呈现方式的配置。 - Variable to contain the name of the email server. This can be used instead of the HostName parameter in the Send-MailMessage cmdlet. + 包含电子邮件服务器名称的变量。这可以代替 Send-MailMessage cmdlet 中的 HostName 参数。 - Dictates when confirmation should be requested. Confirmation is requested when the ConfirmImpact of the operation is equal to or greater than $ConfirmPreference. If $ConfirmPreference is None, actions will only be confirmed when Confirm is specified. + 指示何时应请求确认。当操作的 ConfirmImpact 大于或等于 $ConfirmPreference 时，将请求确认。如果 $ConfirmPreference 为 None，则只有在指定 Confirm 时才会确认操作。 - Dictates the action taken when a Debug message is delivered + 指示传递调试消息时采取的操作 - Dictates the action taken when an error message is delivered + 指示传递错误消息时采取的操作 - Dictates the action taken when progress records are delivered + 指示在传递进度记录时采取的操作 - Dictates the action taken when a Verbose message is delivered + 指示传递详细消息时采取的操作 - Dictates the action taken when a Warning message is delivered + 指示在传递警告消息时采取的操作 - Dictates the action taken when a command generates an item in the Information stream + 指示命令在信息流中生成项时采取的操作 - Dictates the view mode to use when displaying errors + 指示显示错误时使用的视图模式 - Dictates what type of prompt should be displayed for the current nesting level + 指示应为当前嵌套级别显示哪种类型的提示 - If true, $ErrorActionPreference applies to native executables, so that non-zero exit codes will generate cmdlet-style errors governed by error action settings + 如果为 true，则 $ErrorActionPreference 也适用于本机可执行文件，因此非零退出代码会生成受错误操作设置控制的 cmdlet 风格错误 - If true, WhatIf is considered to be enabled for all commands. + 如果为 true，则认为为所有命令启用 WhatIf。 - Dictates how arguments are passed to native executables. + 指示如何将参数传递给本机可执行文件。 - Dictates the limit of enumeration on formatting IEnumerable objects + 指示设置 IEnumerable 对象格式的枚举限制 - Displays errors with a stack trace + 显示具有堆栈跟踪的错误 - Displays errors with inner exceptions + 显示具有内部异常的错误 - Displays errors with their sources + 显示其源的错误 - Displays errors with a description of the error class + 显示包含错误类说明的错误 - Culture of the current PowerShell session + 当前 PowerShell 会话的区域性 - UI culture of the current PowerShell session + 当前 PowerShell 会话的 UI 区域性 - Variable to hold all default <cmdlet:parameter, value> pairs + 用于保存所有默认 <cmdlet:parameter, value> 对的变量 - Press Enter to continue... + 按 Enter 继续... - Edition information for the current PowerShell session + 当前 PowerShell 会话的版本信息 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/zh-Hant/GetErrorText.zh-Hant.resx b/src/System.Management.Automation/resources/zh-Hant/GetErrorText.zh-Hant.resx index a4acd582337..f7f014976d1 100644 --- a/src/System.Management.Automation/resources/zh-Hant/GetErrorText.zh-Hant.resx +++ b/src/System.Management.Automation/resources/zh-Hant/GetErrorText.zh-Hant.resx @@ -118,30 +118,30 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot load a resource with base name "{0}". + 無法載入基底名稱為 "{0}" 的資源。 - Cannot load a resource string with ID "{0}". + 無法載入識別碼為 "{0}" 的資源字串。 - Running commands is prevented by Stop policy settings. + 「停止」原則設定會防止執行命令。 - Cannot retrieve the message "{0}" "{1}" "{2}" because an assembly was not registered. + 無法擷取訊息 "{0}" "{1}" "{2}"，因為未註冊組件。 - Cannot retrieve the message "{0}" "{1}" "{2}". A template string format is not valid in template string "{3}". + 無法擷取訊息 "{0}" "{1}" "{2}"。範本字串格式在範本字串 "{3}" 中無效。 - Cannot retrieve the message "{0}" "{1}" "{2}". A template string exists, but its value is empty or blank. + 無法擷取訊息 "{0}" "{1}" "{2}"。範本字串存在，但其值為空或空白。 - The pipeline has been stopped. + 管線已停止。 - The script failed due to call depth overflow. + 指令碼因呼叫深度溢位而失敗。 - The pipeline failed due to call depth overflow. + 管線因呼叫深度溢位而失敗。 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/zh-Hant/HistoryStrings.zh-Hant.resx b/src/System.Management.Automation/resources/zh-Hant/HistoryStrings.zh-Hant.resx index 7dffccf7a49..a523718fa07 100644 --- a/src/System.Management.Automation/resources/zh-Hant/HistoryStrings.zh-Hant.resx +++ b/src/System.Management.Automation/resources/zh-Hant/HistoryStrings.zh-Hant.resx @@ -118,36 +118,36 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The identifier {0} is not a valid value for a History identifier. Specify a positive number, and then try again. + 識別碼 {0} 不是歷程記錄識別碼的有效值。請指定正數，然後再試一次。 - Cannot locate the history for Id {0}. + 找不到識別碼 {0} 的歷程記錄。 - The count cannot be combined with multiple Ids. + 計數無法與多個識別碼一起使用。 - Cannot locate the history for command line {0}. + 找不到命令列 {0} 的歷程記錄。 - Cannot locate most recent history. + 找不到最近的歷程記錄。 - The Invoke-History cmdlet is called repeatedly, in a loop. + Invoke-History cmdlet 會在迴圈中重複呼叫。 - Cannot process multiple history commands. You can only run a single command by using Invoke-History. + 無法處理多個歷程記錄命令。您只能使用 Invoke-History 執行單一命令。 - Cannot add history because the input object has a format that is not valid. + 無法加入歷程記錄，因為輸入物件的格式無效。 - The identifier {0} is not valid. Specify a positive number, and then try again. + 識別碼 {0} 無效。請指定正數，然後再試一次。 - This command will clear all the entries from the session history. + 此命令會清除工作階段歷程記錄中的所有項目。 - The count cannot be combined with multiple CommandLine parameters. + 計數無法與多個 CommandLine 參數合併使用。 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/zh-Hant/InternalCommandStrings.zh-Hant.resx b/src/System.Management.Automation/resources/zh-Hant/InternalCommandStrings.zh-Hant.resx index 377a1f19d70..484132cb17e 100644 --- a/src/System.Management.Automation/resources/zh-Hant/InternalCommandStrings.zh-Hant.resx +++ b/src/System.Management.Automation/resources/zh-Hant/InternalCommandStrings.zh-Hant.resx @@ -118,76 +118,76 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Input name "{0}" is ambiguous. It can be resolved to multiple matched methods. Possible matches include:{1}. + 輸入名稱 "{0}" 不明確。它可解析為多個相符的方法。可能的相符項目包括: {1}。 - Input name "{0}" is ambiguous. It can be resolved to multiple matched members. Possible matches include:{1}. + 輸入名稱 "{0}" 不明確。它可解析為多個相符的成員。可能的相符項目包括: {1}。 - Retrieve the value for key '{0}' + 擷取索引鍵 '{0}' 的值 - Invoke method '{0}' with arguments: {1} + 使用引數叫用方法 '{0}': {1} - Invoke method '{0}' + 叫用方法 '{0}' - Retrieve the value for property '{0}' + 擷取屬性 '{0}' 的值 InputObject: {0} - Cannot operate on a 'null' input object. + 無法在 'null' 輸入物件上作業。 - Input name "{0}" cannot be resolved to a method. + 輸入名稱 "{0}" 無法解析為方法。 - Cannot invoke a method in the restricted language mode. + 無法在受限制的語言模式中呼叫方法。 - The -WhatIf and -Confirm parameters are not supported for script blocks. + 指令碼區塊不支援 -WhatIf 和 -Confirm 參數。 - The '{0}' operation is not allowed in the RestrictedLanguage mode. + 在 RestrictedLanguage 模式中，不允許 '{0}' 作業。 - An operator is required to compare the two specified values. Include a valid operator in the command, and then try the command again. For example, Get-Process | Where-Object -Property Name -eq Idle + 需要運算子來比較這兩個指定值。請在命令中加入有效的運算子，然後再試一次。例如，Get-Process | Where-Object -Property Name -eq Idle - The input name "{0}" cannot be resolved to a property. + 輸入名稱 "{0}" 無法解析為屬性。 - The input name "{0}" cannot be resolved to a member. + 輸入名稱 "{0}" 無法解析為成員。 - The specified operator requires both the -Property and -Value parameters. Provide values for both parameters, and then try the command again. + 指定的運算子需要 -Property 和 -Value 參數。請為這兩個參數都提供值，然後再試一次命令。 - This method cannot be run on the current thread. It can only be called on the cmdlet thread. + 無法在目前的執行緒上執行此方法。只能在 Cmdlet 執行緒上呼叫。 - A ForEach-Object -Parallel using variable cannot be a script block. Passed-in script block variables are not supported with ForEach-Object -Parallel, and can result in undefined behavior. + ForEach-Object -Parallel 使用的變數不能是指令碼區塊。ForEach-Object -Parallel 不支援傳入的指令碼區塊變數，且可能導致未定義的行為。 - A ForEach-Object -Parallel piped input object cannot be a script block. Passed-in script block variables are not supported with ForEach-Object -Parallel, and can result in undefined behavior. + ForEach-Object -Parallel 的管道輸入物件不能是指令碼區塊。ForEach-Object -Parallel 不支援傳入的指令碼區塊變數，且可能導致未定義的行為。 - The 'TimeoutSeconds' parameter cannot be used with the 'AsJob' parameter. + 'TimeoutSeconds' 參數不能與 'AsJob' 參數一起使用。 - The following common parameters are not currently supported in the Parallel parameter set: -ErrorAction, WarningAction, InformationAction, PipelineVariable + Parallel 參數集目前不支援下列一般參數: +ErrorAction、WarningAction、InformationAction、PipelineVariable - An unexpected error has occurred while processing ForEach-Object -Parallel input. This may mean that some of the piped input did not get processed. Error: {0}. + 處理 ForEach-Object -Parallel 輸入時發生非預期錯誤。這可能表示部分管道輸入未處理。錯誤: {0}。 ForEach-Object Cmdlet - Method invocation on type '{0}' will not be allowed when run in Constrained Language mode. + 在 Constrained Language 模式下執行時，不允許對類型 '{0}' 呼叫方法。 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/zh-Hant/InternalHostUserInterfaceStrings.zh-Hant.resx b/src/System.Management.Automation/resources/zh-Hant/InternalHostUserInterfaceStrings.zh-Hant.resx index 19396dacc2c..87da8339a10 100644 --- a/src/System.Management.Automation/resources/zh-Hant/InternalHostUserInterfaceStrings.zh-Hant.resx +++ b/src/System.Management.Automation/resources/zh-Hant/InternalHostUserInterfaceStrings.zh-Hant.resx @@ -118,106 +118,106 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - WriteDebug stopped because the value of the DebugPreference variable was 'Stop'. + WriteDebug 已停止，因為 DebugPreference 變數的值是 'Stop'。 - The value {0} is not a supported ActionPreference value. + 值 {0} 不是支援的 ActionPreference 值。 - The "{0}" parameter must contain at least one value. + "{0}" 參數必須至少包含一個值。 - &Yes + 是(&Y) - Continue. + 繼續。 - Yes to &All + 全部皆是(&A) - Continue, and do not ask again whether to continue in this session. + 繼續，並且不要再詢問是否要在此工作階段中繼續。 - &No + 否(&N) - End the operation with an error. + 以錯誤結束作業。 - No to A&ll + 全部皆否(&L) - End the operation with an error. Do not request to resume operation for this session. + 以錯誤結束作業。請勿要求在此工作階段繼續作業。 - &Suspend + 暫止(&S) - Pause the current operation and enter a command prompt. Type "exit" to resume the paused operation. + 暫停目前的作業，並進入命令提示字元。輸入 "exit" 以繼續已暫停的作業。 - Continue with this operation? + 要繼續此作業嗎? - (default is "{0}") + (預設為 "{0}") - (default choices are {0}) + (預設選項為 {0}) - Choice[{0}]: + 選擇[{0}]: - "{0}" should have at least one element. + "{0}" 應至少有一個元素。 - "{0}" must be a valid index into "{1}". "{2}" is not a valid index. + "{0}" 必須是 "{1}" 的有效索引。"{2}" 不是有效的索引。 - Cannot process the hot key because a question mark ("?") cannot be used as a hot key. + 無法處理快速鍵，因為問號 ("?") 不能用作快速鍵。 - VERBOSE: {0} + 詳細資訊: {0} - WARNING: {0} + 警告: {0} - DEBUG: {0} + 偵錯: {0} - The host is not currently transcribing. + 主機目前未進行轉錄。 - Command start time: {0} + 命令開始時間: {0} ********************** -PowerShell transcript start -Start time: {0:yyyyMMddHHmmss} -Username: {1} -RunAs User: {2} -Configuration Name: {3} -Machine: {4} ({5}) -Host Application: {6} -Process ID: {7} +PowerShell 文字記錄開始 +開始時間: {0:yyyyMMddHHmmss} +使用者名稱: {1} +RunAs 使用者: {2} +設定名稱: {3} +機器: {4}({5}) +主應用程式: {6} +處理序識別碼: {7} {8} ********************** ********************** -PowerShell transcript start -Start time: {0:yyyyMMddHHmmss} +PowerShell 文字記錄開始 +開始時間: {0:yyyyMMddHHmmss} ********************** ********************** -PowerShell transcript end -End time: {0:yyyyMMddHHmmss} +PowerShell 文字記錄結束 +結束時間: {0:yyyyMMddHHmmss} ********************** - File path {0} resolves to a directory. + 檔案路徑 {0} 會解析為目錄。 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/zh-Hant/MiniShellErrors.zh-Hant.resx b/src/System.Management.Automation/resources/zh-Hant/MiniShellErrors.zh-Hant.resx index b7d2e849e72..15d083fa3cb 100644 --- a/src/System.Management.Automation/resources/zh-Hant/MiniShellErrors.zh-Hant.resx +++ b/src/System.Management.Automation/resources/zh-Hant/MiniShellErrors.zh-Hant.resx @@ -118,9 +118,9 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The update is not supported for the runspace configuration category {0}. + Runspace 設定類別 {0} 不支援更新。 - The following errors occurred when updating the assembly list for the runspace: {0}. + 更新 Runspace 的組件清單時，發生下列錯誤: {0}。 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/zh-Hant/RunspaceInit.zh-Hant.resx b/src/System.Management.Automation/resources/zh-Hant/RunspaceInit.zh-Hant.resx index acfb5605bb6..d4e95fc764f 100644 --- a/src/System.Management.Automation/resources/zh-Hant/RunspaceInit.zh-Hant.resx +++ b/src/System.Management.Automation/resources/zh-Hant/RunspaceInit.zh-Hant.resx @@ -118,114 +118,114 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Variable to hold the enabled experimental feature names + 用來存放已啟用實驗性功能名稱的變數 - Parent folder of the host application of the current runspace + 目前 Runspace 之主應用程式的父資料夾 - Folder containing the current user's profile + 包含目前使用者設定檔的資料夾 - A reference to the host of the current runspace + 目前 Runspace 的主機參照 - The run objects available to cmdlets + 可供 Cmdlet 使用的執行物件 - Version information for current PowerShell session + 目前 PowerShell 工作階段的版本資訊 - Current process ID + 目前的程序識別碼 - Status of last command + 最後一個命令的狀態 - Parent process ID + 父處理序識別碼 - The ShellID identifies the current shell. This is used by #Requires. + ShellID 會識別目前的殼層。 這是由 #Requires 所使用的。 - Name of the current console file + 目前主控台檔案名稱 - The text encoding used when piping text to a native executable file + 將文字管線傳送至原生可執行檔時使用的文字編碼 - The text encoding used when reading output text from a native executable file + 從原生可執行檔讀取輸出文字時使用的文字編碼 - Configuration controlling how text is rendered. + 控制文字轉譯方式的設定。 - Variable to contain the name of the email server. This can be used instead of the HostName parameter in the Send-MailMessage cmdlet. + 用來包含電子郵件伺服器名稱的變數。這可用來取代 Send-MailMessage Cmdlet 中的 HostName 參數。 - Dictates when confirmation should be requested. Confirmation is requested when the ConfirmImpact of the operation is equal to or greater than $ConfirmPreference. If $ConfirmPreference is None, actions will only be confirmed when Confirm is specified. + 規定應要求確認的時機。當作業的 ConfirmImpact 等於或大於 $ConfirmPreference 時，系統會要求確認。如果 $ConfirmPreference 為 none，則只有在指定 Confirm 時才會確認動作。 - Dictates the action taken when a Debug message is delivered + 規定傳遞偵錯訊息時要採取的動作 - Dictates the action taken when an error message is delivered + 規定傳遞錯誤訊息時要採取的動作 - Dictates the action taken when progress records are delivered + 規定傳遞進度記錄時要採取的動作 - Dictates the action taken when a Verbose message is delivered + 規定傳遞詳細資訊訊息時要採取的動作 - Dictates the action taken when a Warning message is delivered + 規定傳遞警告訊息時要採取的動作 - Dictates the action taken when a command generates an item in the Information stream + 規定命令在 Information 資料流中產生項目時要採取的動作 - Dictates the view mode to use when displaying errors + 規定顯示錯誤時要使用的檢視模式 - Dictates what type of prompt should be displayed for the current nesting level + 規定目前巢狀層級應顯示的提示類型 - If true, $ErrorActionPreference applies to native executables, so that non-zero exit codes will generate cmdlet-style errors governed by error action settings + 如果為 true，$ErrorActionPreference 會套用至原生可執行檔，因此非零結束代碼會產生受錯誤動作設定控制的 Cmdlet 樣式錯誤 - If true, WhatIf is considered to be enabled for all commands. + 如果為 true，則會將所有命令的 WhatIf 視為已啟用。 - Dictates how arguments are passed to native executables. + 規定如何將引數傳遞至原生可執行檔。 - Dictates the limit of enumeration on formatting IEnumerable objects + 規定格式化 IEnumerable 物件時的列舉上限 - Displays errors with a stack trace + 顯示錯誤與堆疊追蹤 - Displays errors with inner exceptions + 顯示錯誤與內部例外狀況 - Displays errors with their sources + 顯示錯誤及其來源 - Displays errors with a description of the error class + 顯示錯誤及其錯誤類別描述 - Culture of the current PowerShell session + 目前 PowerShell 工作階段的文化特性 - UI culture of the current PowerShell session + 目前 PowerShell 工作階段的 UI 文化特性 - Variable to hold all default <cmdlet:parameter, value> pairs + 用於儲存所有預設 <cmdlet:parameter, value> 對的變數 - Press Enter to continue... + 按 Enter 鍵以繼續... - Edition information for the current PowerShell session + 目前 PowerShell 工作階段的版本資訊 \ No newline at end of file From fa4cb4321e9780da190e73896498c78bbabb1773 Mon Sep 17 00:00:00 2001 From: olprod Date: Fri, 14 Aug 2026 12:26:10 -0700 Subject: [PATCH 4/7] Localized file check-in by OneLocBuild Task: Build definition ID 13420: Build ID 2677113 --- .../public.XamlLocalizableResources.cs.resx | 166 ++++---- .../de/public.InvariantResources.de.resx | 6 +- .../public.XamlLocalizableResources.de.resx | 150 ++++---- .../es/public.InvariantResources.es.resx | 6 +- .../public.XamlLocalizableResources.es.resx | 168 ++++---- .../fr/public.GraphicalHostResources.fr.resx | 2 +- .../fr/public.InvariantResources.fr.resx | 6 +- .../public.XamlLocalizableResources.fr.resx | 164 ++++---- .../it/public.GraphicalHostResources.it.resx | 2 +- .../public.XamlLocalizableResources.it.resx | 162 ++++---- .../ja/public.GraphicalHostResources.ja.resx | 2 +- .../ja/public.InvariantResources.ja.resx | 2 +- .../public.XamlLocalizableResources.ja.resx | 138 +++---- .../pl/public.GraphicalHostResources.pl.resx | 2 +- .../pl/public.InvariantResources.pl.resx | 6 +- .../public.XamlLocalizableResources.pl.resx | 166 ++++---- .../ru/public.GraphicalHostResources.ru.resx | 2 +- .../ru/public.InvariantResources.ru.resx | 6 +- .../public.XamlLocalizableResources.ru.resx | 170 ++++----- .../tr/public.GraphicalHostResources.tr.resx | 2 +- .../tr/public.InvariantResources.tr.resx | 6 +- .../public.InvariantResources.zh-Hans.resx | 2 +- ...public.GraphicalHostResources.zh-Hant.resx | 2 +- .../resources/cs/RunspaceStrings.cs.resx | 80 ++-- .../resources/cs/SessionStateStrings.cs.resx | 358 +++++++++--------- .../cs/VerbDescriptionStrings.cs.resx | 200 +++++----- .../SessionStateProviderBaseStrings.de.resx | 24 +- .../resources/de/SubsystemStrings.de.resx | 26 +- .../SessionStateProviderBaseStrings.es.resx | 24 +- .../resources/es/SubsystemStrings.es.resx | 26 +- .../es/VerbDescriptionStrings.es.resx | 200 +++++----- .../resources/fr/SubsystemStrings.fr.resx | 26 +- .../resources/it/SubsystemStrings.it.resx | 26 +- .../SessionStateProviderBaseStrings.ja.resx | 24 +- .../resources/ja/SubsystemStrings.ja.resx | 26 +- .../ja/VerbDescriptionStrings.ja.resx | 200 +++++----- .../resources/pl/SubsystemStrings.pl.resx | 26 +- .../SessionStateProviderBaseStrings.ru.resx | 24 +- .../resources/ru/SubsystemStrings.ru.resx | 26 +- .../ru/VerbDescriptionStrings.ru.resx | 200 +++++----- .../SessionStateProviderBaseStrings.tr.resx | 24 +- .../resources/tr/SubsystemStrings.tr.resx | 26 +- .../resources/tr/TabCompletionStrings.tr.resx | 322 ++++++++-------- .../tr/VerbDescriptionStrings.tr.resx | 200 +++++----- ...ssionStateProviderBaseStrings.zh-Hans.resx | 24 +- .../zh-Hans/SubsystemStrings.zh-Hans.resx | 26 +- .../zh-Hans/TabCompletionStrings.zh-Hans.resx | 326 ++++++++-------- .../VerbDescriptionStrings.zh-Hans.resx | 200 +++++----- ...ssionStateProviderBaseStrings.zh-Hant.resx | 24 +- .../VerbDescriptionStrings.zh-Hant.resx | 200 +++++----- 50 files changed, 2113 insertions(+), 2113 deletions(-) diff --git a/src/Microsoft.Management.UI.Internal/resources/cs/public.XamlLocalizableResources.cs.resx b/src/Microsoft.Management.UI.Internal/resources/cs/public.XamlLocalizableResources.cs.resx index 2231ee4929a..03bcb7fbfdf 100644 --- a/src/Microsoft.Management.UI.Internal/resources/cs/public.XamlLocalizableResources.cs.resx +++ b/src/Microsoft.Management.UI.Internal/resources/cs/public.XamlLocalizableResources.cs.resx @@ -118,66 +118,66 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Available Columns + Dostupné sloupce - Add + Přidat - Remove + Odebrat - Selected Columns + Vybrané sloupce - Back + Zpět Localizable AutomationName for control that is used by accessibility screen readers. - Forward + Vpřed Localizable AutomationName for control that is used by accessibility screen readers. - Find in this column + Najít v tomto sloupci Background text shown in the search box. - Expand + Rozbalit - Name + Název - New Query + Nový dotaz - Tasks + Úlohy This is the title string for the Task Pane. - Tasks + Úlohy AutomationProperties.Name of a SeparatedList. - Indeterminate Progress Icon + Ikona neurčitého průběhu - Add criteria + Přidat kritéria - Overwrite the existing query or type a different name to save a new query. Each query consists of criteria, sorting, and column customizations. + Můžete přepsat existující dotaz nebo zadat jiný název a uložit nový dotaz. Každý dotaz se skládá z kritérií a z vlastního nastavení řazení a sloupců. - Ok + OK - Cancel + Zrušit - Click to save a search query + Kliknutím vyhledávací dotaz uložíte. - Available columns + Dostupné sloupce >> @@ -188,104 +188,104 @@ The contents of a button which indicates that items will move from the right column to left column - Move up + Přesunout nahoru - Move down + Přesunout dolů OK - Cancel + Zrušit - Select columns + Vybrat sloupce - Move selected column to list of visible columns + Vybraný sloupec můžete přesunout do seznamu zobrazených sloupců. - Move selected column to list of hidden columns + Vybraný sloupec můžete přesunout do seznamu skrytých sloupců. - This column may not be removed. + Tento sloupec nelze odebrat. - The list must always display at least one column. + V seznamu musí být vždy uveden minimálně jeden sloupec. - Selected columns + Vybrané sloupce - Find in this column + Najít v tomto sloupci - Expand + Rozbalit - Click to clear all filter criteria. + Kliknutím můžete vymazat všechna kritéria filtru. - Click to add search criteria. + Kliknutím můžete přidat vyhledávací kritéria. - Click to expand search criteria. + Kliknutím můžete rozšířit vyhledávací kritéria. - There are currently no saved queries. + Aktuálně nejsou k dispozici žádné uložené dotazy. - Queries + Dotazy - Delete + Odstranit - Rename + Přejmenovat - {0} rule + {0} pravidlo The text representation of a rule in the filter panel, displayed to accessibility clients. {0} will be the name of the rule. - Add + Přidat - Cancel + Zrušit - Add Filter Criteria + Přidat kritéria filtru - Value + Hodnota The name for text input fields - <Empty> + <Prázdné> - Rules + Pravidla The name of the panel which contains the filter rules - Delete + Odstranit - Query + Dotaz - Queries + Dotazy - Search + Hledat - ({0} of {1}) + ({0} z(e) {1}) The text displayed in the management list title when the list has a filter applied. {0} will be the number of items shown in the list. {1} will be the total number of items in the list before filtering. - Searching... + Vyhledávání... The text displayed in the management list title when the list is processing a filter. @@ -293,120 +293,120 @@ The text displayed in the management list title when the list does not have a filter applied. {0} will be the number of items shown in the list. - Filter + Filtrovat Localizable AutomationName for control that is used by accessibility screen readers. - Filter + Filtrovat - Shortcut Rules + Pravidla zkratek The name used to indicate custom filter rules which are specific to a particular application. - Columns Rules + Pravidla sloupců The name used to indicate filter rules that are based upon the properties of the items in the list. - Sort Glyph + Piktogram Setřídit - Sort Glyph + Piktogram Setřídit - Collapse + Sbalit - Collapse + Sbalit - Sorted ascending + Seřazeno vzestupně The text used for the accessible ItemStatus property when a column is sorted ascending. - Sorted descending + Seřazeno sestupně The text used for the accessible ItemStatus property when a column is sorted descending. - Collapse + Sbalit - Expand + Rozbalit - Search + Hledat - Cancel + Zrušit - Clear All + Vymazat vše - Clear All + Vymazat vše - Clear Search Text + Vymazat hledaný text - Tasks + Úlohy - Search + Hledat The accessible name of the Search button in the filter panel. - Cancel + Zrušit The accessible name of the Stop Search button in the filter panel. - Expand or Collapse Filter Panel + Rozbalit nebo sbalit panel filtrů The accessible name of the button that expands/collapses the filter panel. - Filter + Filtrovat The background text of the list's search box when filtering is immediate. - Click to display saved search queries. + Kliknutím zobrazíte uložené vyhledávací dotazy. - Filter applied. + Byl použit filtr. - and + a The first header operator indicates that it is the first item in the list of filter rules. The AND value is used to indicate that it is and'ed with the above SearchBox. - and + a The header operator indicates that it is the first item in a group of filter rules which are the same. The AND value is used to indicate that it is and'ed with the other groups in the panel. - or + nebo The Item operator indicates that it is NOT the first item in a group of filter rules which are the same. The OR value is used to indicate that it is or'ed with the other items in the same group. - No matches found. + Nenašly se žádné shody. The text displayed in the ManagementList when the filter has been applied but matching items were found. - Collapse + Sbalit - Expand + Rozbalit - Show Children + Zobrazit podřízené - Show Children + Zobrazit podřízené {0}: {1} The format string used for the ManagementList title when query has been applied. For example, "Users: My Fancy Query" - Cancel + Zrušit OK diff --git a/src/Microsoft.Management.UI.Internal/resources/de/public.InvariantResources.de.resx b/src/Microsoft.Management.UI.Internal/resources/de/public.InvariantResources.de.resx index bf746936812..bce5c9ffd77 100644 --- a/src/Microsoft.Management.UI.Internal/resources/de/public.InvariantResources.de.resx +++ b/src/Microsoft.Management.UI.Internal/resources/de/public.InvariantResources.de.resx @@ -118,7 +118,7 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - {0} cannot be modified directly, use {1} instead. + „{0}“ kann nicht direkt geändert werden. Verwenden Sie stattdessen „{1}“. Spalten @@ -140,9 +140,9 @@ The format string that is used by the InnerList in the case where a whole number type is used. The {0} will be the column value. - {0} does not support adding to the Items collection, use {1} instead. + Das Hinzufügen zur Elementsammlung wird von „{0}“ nicht unterstützt. Verwenden Sie stattdessen „{1}“. - If View is set to a {0}, it should have the type {1}. + Wenn die Ansicht auf „{0}“ eingestellt ist, sollte sie den Typ „{1}“ aufweisen. \ No newline at end of file diff --git a/src/Microsoft.Management.UI.Internal/resources/de/public.XamlLocalizableResources.de.resx b/src/Microsoft.Management.UI.Internal/resources/de/public.XamlLocalizableResources.de.resx index 2231ee4929a..f468bd5941b 100644 --- a/src/Microsoft.Management.UI.Internal/resources/de/public.XamlLocalizableResources.de.resx +++ b/src/Microsoft.Management.UI.Internal/resources/de/public.XamlLocalizableResources.de.resx @@ -118,37 +118,37 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Available Columns + Verfügbare Spalten - Add + Hinzufügen - Remove + Entfernen - Selected Columns + Ausgewählte Spalten - Back + Zurück Localizable AutomationName for control that is used by accessibility screen readers. - Forward + Vorwärts Localizable AutomationName for control that is used by accessibility screen readers. - Find in this column + In dieser Spalte suchen Background text shown in the search box. - Expand + Erweitern Name - New Query + Neue Abfrage Tasks @@ -159,25 +159,25 @@ AutomationProperties.Name of a SeparatedList. - Indeterminate Progress Icon + Unbestimmte Statusanzeige - Add criteria + Kriterien hinzufügen - Overwrite the existing query or type a different name to save a new query. Each query consists of criteria, sorting, and column customizations. + Überschreiben Sie die vorhandene Abfrage, oder geben Sie einen anderen Namen ein, um eine neue Abfrage zu speichern. Jede Abfrage enthält Kriterien, Sortier- und Spaltenanpassungen. - Ok + OK - Cancel + Abbrechen - Click to save a search query + Klicken Sie hier, um eine Suchabfrage zu speichern - Available columns + Verfügbare Spalten >> @@ -188,104 +188,104 @@ The contents of a button which indicates that items will move from the right column to left column - Move up + Nach oben verschieben - Move down + Nach unten OK - Cancel + Abbrechen - Select columns + Spalten auswählen - Move selected column to list of visible columns + Ausgewählte Spalte in die Liste mit den sichtbaren Spalten verschieben - Move selected column to list of hidden columns + Ausgewählte Spalte in die Liste mit den ausgeblendeten Spalten verschieben - This column may not be removed. + Diese Spalte darf nicht entfernt werden. - The list must always display at least one column. + In der Liste muss immer mindestens eine Spalte angezeigt werden. - Selected columns + Ausgewählte Spalten - Find in this column + In dieser Spalte suchen - Expand + Erweitern - Click to clear all filter criteria. + Klicken Sie hier, um alle Filterkriterien zu löschen. - Click to add search criteria. + Klicken Sie hier, um Suchkriterien hinzuzufügen. - Click to expand search criteria. + Klicken Sie hier, um die Suchkriterien zu erweitern. - There are currently no saved queries. + Derzeit sind keine gespeicherten Abfragen vorhanden. - Queries + Abfragen - Delete + Löschen - Rename + Umbenennen - {0} rule + {0} Regel The text representation of a rule in the filter panel, displayed to accessibility clients. {0} will be the name of the rule. - Add + Hinzufügen - Cancel + Abbrechen - Add Filter Criteria + Filterkriterien hinzufügen - Value + Wert The name for text input fields <Empty> - Rules + Regeln The name of the panel which contains the filter rules - Delete + Löschen - Query + Abfrage - Queries + Abfragen - Search + Suchen - ({0} of {1}) + ({0} von {1}) The text displayed in the management list title when the list has a filter applied. {0} will be the number of items shown in the list. {1} will be the total number of items in the list before filtering. - Searching... + Suche wird ausgeführt… The text displayed in the management list title when the list is processing a filter. @@ -300,67 +300,67 @@ Filter - Shortcut Rules + Verknüpfungsregeln The name used to indicate custom filter rules which are specific to a particular application. - Columns Rules + Spaltenregeln The name used to indicate filter rules that are based upon the properties of the items in the list. - Sort Glyph + Sortierungssymbol - Sort Glyph + Sortierungssymbol - Collapse + Reduzieren - Collapse + Reduzieren - Sorted ascending + Aufsteigend sortiert The text used for the accessible ItemStatus property when a column is sorted ascending. - Sorted descending + Absteigend sortiert The text used for the accessible ItemStatus property when a column is sorted descending. - Collapse + Reduzieren - Expand + Erweitern - Search + Suchen - Cancel + Abbrechen - Clear All + Auswahl aufheben - Clear All + Auswahl aufheben - Clear Search Text + Suchtext löschen Tasks - Search + Suchen The accessible name of the Search button in the filter panel. - Cancel + Abbrechen The accessible name of the Stop Search button in the filter panel. - Expand or Collapse Filter Panel + Filterpanel erweitern oder reduzieren The accessible name of the button that expands/collapses the filter panel. @@ -368,45 +368,45 @@ The background text of the list's search box when filtering is immediate. - Click to display saved search queries. + Klicken Sie hier, um gespeicherte Suchabfragen anzuzeigen. - Filter applied. + Filter wurde übernommen. - and + und The first header operator indicates that it is the first item in the list of filter rules. The AND value is used to indicate that it is and'ed with the above SearchBox. - and + und The header operator indicates that it is the first item in a group of filter rules which are the same. The AND value is used to indicate that it is and'ed with the other groups in the panel. - or + oder The Item operator indicates that it is NOT the first item in a group of filter rules which are the same. The OR value is used to indicate that it is or'ed with the other items in the same group. - No matches found. + Es wurden keine Übereinstimmungen gefunden. The text displayed in the ManagementList when the filter has been applied but matching items were found. - Collapse + Reduzieren - Expand + Erweitern - Show Children + Untergeordnete Elemente anzeigen - Show Children + Untergeordnete Elemente anzeigen {0}: {1} The format string used for the ManagementList title when query has been applied. For example, "Users: My Fancy Query" - Cancel + Abbrechen OK diff --git a/src/Microsoft.Management.UI.Internal/resources/es/public.InvariantResources.es.resx b/src/Microsoft.Management.UI.Internal/resources/es/public.InvariantResources.es.resx index 08c41b65379..1e2f5ac226c 100644 --- a/src/Microsoft.Management.UI.Internal/resources/es/public.InvariantResources.es.resx +++ b/src/Microsoft.Management.UI.Internal/resources/es/public.InvariantResources.es.resx @@ -118,7 +118,7 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - {0} cannot be modified directly, use {1} instead. + {0} no se puede modificar directamente, use {1} en su lugar. Columnas @@ -140,9 +140,9 @@ The format string that is used by the InnerList in the case where a whole number type is used. The {0} will be the column value. - {0} does not support adding to the Items collection, use {1} instead. + {0} no admite la adición a la colección Items, use {1} en su lugar. - If View is set to a {0}, it should have the type {1}. + Si View se establece en un {0}, debe tener el tipo {1}. \ No newline at end of file diff --git a/src/Microsoft.Management.UI.Internal/resources/es/public.XamlLocalizableResources.es.resx b/src/Microsoft.Management.UI.Internal/resources/es/public.XamlLocalizableResources.es.resx index 2231ee4929a..8e2064f9ed5 100644 --- a/src/Microsoft.Management.UI.Internal/resources/es/public.XamlLocalizableResources.es.resx +++ b/src/Microsoft.Management.UI.Internal/resources/es/public.XamlLocalizableResources.es.resx @@ -118,66 +118,66 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Available Columns + Columnas disponibles - Add + Agregar - Remove + Quitar - Selected Columns + Columnas seleccionadas - Back + Atrás Localizable AutomationName for control that is used by accessibility screen readers. - Forward + Reenviar Localizable AutomationName for control that is used by accessibility screen readers. - Find in this column + Buscar en esta columna Background text shown in the search box. - Expand + Expandir - Name + Nombre - New Query + Nueva consulta - Tasks + Tareas This is the title string for the Task Pane. - Tasks + Tareas AutomationProperties.Name of a SeparatedList. - Indeterminate Progress Icon + Icono de progreso indeterminado - Add criteria + Agregar criterios - Overwrite the existing query or type a different name to save a new query. Each query consists of criteria, sorting, and column customizations. + Sobrescriba la consulta existente o escriba un nombre diferente para guardar una nueva consulta. Cada consulta consta de criterios, ordenación y personalizaciones de columna. - Ok + Aceptar - Cancel + Cancelar - Click to save a search query + Haga clic para guardar una consulta de búsqueda - Available columns + Columnas disponibles >> @@ -188,104 +188,104 @@ The contents of a button which indicates that items will move from the right column to left column - Move up + Mover hacia arriba - Move down + Mover hacia abajo - OK + Aceptar - Cancel + Cancelar - Select columns + Seleccionar columnas - Move selected column to list of visible columns + Mover columna seleccionada a la lista de columnas visibles - Move selected column to list of hidden columns + Mover columna seleccionada a la lista de columnas ocultas - This column may not be removed. + No se puede quitar esta columna. - The list must always display at least one column. + La lista debe mostrar siempre una columna como mínimo. - Selected columns + Columnas seleccionadas - Find in this column + Buscar en esta columna - Expand + Expandir - Click to clear all filter criteria. + Haga clic para borrar todos los criterios de filtro. - Click to add search criteria. + Haga clic para agregar criterios de búsqueda. - Click to expand search criteria. + Haga clic para expandir los criterios de búsqueda. - There are currently no saved queries. + No hay ninguna consulta guardada en este momento. - Queries + Consultas - Delete + Eliminar - Rename + Cambiar nombre - {0} rule + {0} regla The text representation of a rule in the filter panel, displayed to accessibility clients. {0} will be the name of the rule. - Add + Agregar - Cancel + Cancelar - Add Filter Criteria + Agregar criterios de filtro - Value + Valor The name for text input fields <Empty> - Rules + Reglas The name of the panel which contains the filter rules - Delete + Eliminar - Query + Consulta - Queries + Consultas - Search + Buscar - ({0} of {1}) + ({0} de {1}) The text displayed in the management list title when the list has a filter applied. {0} will be the number of items shown in the list. {1} will be the total number of items in the list before filtering. - Searching... + Buscando... The text displayed in the management list title when the list is processing a filter. @@ -293,122 +293,122 @@ The text displayed in the management list title when the list does not have a filter applied. {0} will be the number of items shown in the list. - Filter + Filtrar Localizable AutomationName for control that is used by accessibility screen readers. - Filter + Filtrar - Shortcut Rules + Reglas de accesos directos The name used to indicate custom filter rules which are specific to a particular application. - Columns Rules + Reglas de columnas The name used to indicate filter rules that are based upon the properties of the items in the list. - Sort Glyph + Glifo de ordenación - Sort Glyph + Glifo de ordenación - Collapse + Contraer - Collapse + Contraer - Sorted ascending + Ordenado de forma ascendente The text used for the accessible ItemStatus property when a column is sorted ascending. - Sorted descending + Ordenado de forma descendente The text used for the accessible ItemStatus property when a column is sorted descending. - Collapse + Contraer - Expand + Expandir - Search + Buscar - Cancel + Cancelar - Clear All + Borrar todo - Clear All + Borrar todo - Clear Search Text + Borrar texto de búsqueda - Tasks + Tareas - Search + Buscar The accessible name of the Search button in the filter panel. - Cancel + Cancelar The accessible name of the Stop Search button in the filter panel. - Expand or Collapse Filter Panel + Expandir o contraer panel de filtro The accessible name of the button that expands/collapses the filter panel. - Filter + Filtrar The background text of the list's search box when filtering is immediate. - Click to display saved search queries. + Haga clic para mostrar las consultas de búsqueda guardadas. - Filter applied. + Filtro aplicado. - and + y The first header operator indicates that it is the first item in the list of filter rules. The AND value is used to indicate that it is and'ed with the above SearchBox. - and + y The header operator indicates that it is the first item in a group of filter rules which are the same. The AND value is used to indicate that it is and'ed with the other groups in the panel. - or + o The Item operator indicates that it is NOT the first item in a group of filter rules which are the same. The OR value is used to indicate that it is or'ed with the other items in the same group. - No matches found. + No se encontraron coincidencias. The text displayed in the ManagementList when the filter has been applied but matching items were found. - Collapse + Contraer - Expand + Expandir - Show Children + Mostrar elementos secundarios - Show Children + Mostrar elementos secundarios {0}: {1} The format string used for the ManagementList title when query has been applied. For example, "Users: My Fancy Query" - Cancel + Cancelar - OK + Aceptar \ No newline at end of file diff --git a/src/Microsoft.Management.UI.Internal/resources/fr/public.GraphicalHostResources.fr.resx b/src/Microsoft.Management.UI.Internal/resources/fr/public.GraphicalHostResources.fr.resx index 2d6df859c89..72e616eb165 100644 --- a/src/Microsoft.Management.UI.Internal/resources/fr/public.GraphicalHostResources.fr.resx +++ b/src/Microsoft.Management.UI.Internal/resources/fr/public.GraphicalHostResources.fr.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - OutGridViewWindow Object + Objet OutGridViewWindow \ No newline at end of file diff --git a/src/Microsoft.Management.UI.Internal/resources/fr/public.InvariantResources.fr.resx b/src/Microsoft.Management.UI.Internal/resources/fr/public.InvariantResources.fr.resx index b4ec0361fdf..f97187289ab 100644 --- a/src/Microsoft.Management.UI.Internal/resources/fr/public.InvariantResources.fr.resx +++ b/src/Microsoft.Management.UI.Internal/resources/fr/public.InvariantResources.fr.resx @@ -118,7 +118,7 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - {0} cannot be modified directly, use {1} instead. + {0} ne peut pas être modifié directement, utilisez {1} à la place. Colonnes @@ -140,9 +140,9 @@ The format string that is used by the InnerList in the case where a whole number type is used. The {0} will be the column value. - {0} does not support adding to the Items collection, use {1} instead. + {0} ne prend pas en charge les ajouts dans les collections d’éléments, utilisez {1} à la place. - If View is set to a {0}, it should have the type {1}. + Si Affichage a la valeur {0}, le type doit être {1}. \ No newline at end of file diff --git a/src/Microsoft.Management.UI.Internal/resources/fr/public.XamlLocalizableResources.fr.resx b/src/Microsoft.Management.UI.Internal/resources/fr/public.XamlLocalizableResources.fr.resx index 2231ee4929a..213463243f1 100644 --- a/src/Microsoft.Management.UI.Internal/resources/fr/public.XamlLocalizableResources.fr.resx +++ b/src/Microsoft.Management.UI.Internal/resources/fr/public.XamlLocalizableResources.fr.resx @@ -118,66 +118,66 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Available Columns + Colonnes disponibles - Add + Ajouter - Remove + Supprimer - Selected Columns + Colonnes sélectionnées - Back + Retour Localizable AutomationName for control that is used by accessibility screen readers. - Forward + Transférer Localizable AutomationName for control that is used by accessibility screen readers. - Find in this column + Chercher dans cette colonne Background text shown in the search box. - Expand + Développer - Name + Nom - New Query + Nouvelle requête - Tasks + Tâches This is the title string for the Task Pane. - Tasks + Tâches AutomationProperties.Name of a SeparatedList. - Indeterminate Progress Icon + Icône de progression indéterminée - Add criteria + Ajouter des critères - Overwrite the existing query or type a different name to save a new query. Each query consists of criteria, sorting, and column customizations. + Remplacez la requête existante ou saisissez un autre nom pour enregistrer une nouvelle requête. Chaque requête se compose de critères, d’un tri et de personnalisations de colonnes. - Ok + OK - Cancel + Annuler - Click to save a search query + Sélectionner pour enregistrer une requête de recherche - Available columns + Colonnes disponibles >> @@ -188,104 +188,104 @@ The contents of a button which indicates that items will move from the right column to left column - Move up + Déplacer vers le haut - Move down + Déplacer vers le bas OK - Cancel + Annuler - Select columns + Sélectionner les colonnes - Move selected column to list of visible columns + Déplacer la colonne sélectionnée vers la liste des colonnes visibles - Move selected column to list of hidden columns + Déplacer la colonne sélectionnée vers la liste des colonnes masquées - This column may not be removed. + Impossible de supprimer cette colonne. - The list must always display at least one column. + La liste doit toujours afficher au moins une colonne. - Selected columns + Colonnes sélectionnées - Find in this column + Chercher dans cette colonne - Expand + Développer - Click to clear all filter criteria. + Cliquez pour effacer tous les critères de filtre. - Click to add search criteria. + Cliquez pour ajouter des critères de recherche. - Click to expand search criteria. + Cliquez pour développer les critères de recherche. - There are currently no saved queries. + Il n’existe actuellement pas de requêtes enregistrées. - Queries + Requêtes - Delete + Supprimer - Rename + Renommer - {0} rule + Règle {0} The text representation of a rule in the filter panel, displayed to accessibility clients. {0} will be the name of the rule. - Add + Ajouter - Cancel + Annuler - Add Filter Criteria + Ajouter des critères de filtre - Value + Valeur The name for text input fields <Empty> - Rules + Règles The name of the panel which contains the filter rules - Delete + Supprimer - Query + Requête - Queries + Requêtes - Search + Rechercher - ({0} of {1}) + ({0} sur {1}) The text displayed in the management list title when the list has a filter applied. {0} will be the number of items shown in the list. {1} will be the total number of items in the list before filtering. - Searching... + Recherche en cours… The text displayed in the management list title when the list is processing a filter. @@ -293,92 +293,92 @@ The text displayed in the management list title when the list does not have a filter applied. {0} will be the number of items shown in the list. - Filter + Filtrer Localizable AutomationName for control that is used by accessibility screen readers. - Filter + Filtrer - Shortcut Rules + Règles de raccourci The name used to indicate custom filter rules which are specific to a particular application. - Columns Rules + Règles des colonnes The name used to indicate filter rules that are based upon the properties of the items in the list. - Sort Glyph + Trier les glyphes - Sort Glyph + Trier les glyphes - Collapse + Réduire - Collapse + Réduire - Sorted ascending + Trié par ordre croissant The text used for the accessible ItemStatus property when a column is sorted ascending. - Sorted descending + Triées par ordre décroissant The text used for the accessible ItemStatus property when a column is sorted descending. - Collapse + Réduire - Expand + Développer - Search + Rechercher - Cancel + Annuler - Clear All + Tout effacer - Clear All + Tout effacer - Clear Search Text + Effacer le texte de recherche - Tasks + Tâches - Search + Rechercher The accessible name of the Search button in the filter panel. - Cancel + Annuler The accessible name of the Stop Search button in the filter panel. - Expand or Collapse Filter Panel + Développer ou réduire le panneau de filtre The accessible name of the button that expands/collapses the filter panel. - Filter + Filtrer The background text of the list's search box when filtering is immediate. - Click to display saved search queries. + Sélectionner pour afficher les requêtes de recherche enregistrées. - Filter applied. + Filtre appliqué. - and + et The first header operator indicates that it is the first item in the list of filter rules. The AND value is used to indicate that it is and'ed with the above SearchBox. - and + et The header operator indicates that it is the first item in a group of filter rules which are the same. The AND value is used to indicate that it is and'ed with the other groups in the panel. @@ -386,27 +386,27 @@ The Item operator indicates that it is NOT the first item in a group of filter rules which are the same. The OR value is used to indicate that it is or'ed with the other items in the same group. - No matches found. + Correspondances introuvables. The text displayed in the ManagementList when the filter has been applied but matching items were found. - Collapse + Réduire - Expand + Développer - Show Children + Afficher les enfants - Show Children + Afficher les enfants - {0}: {1} + {0} : {1} The format string used for the ManagementList title when query has been applied. For example, "Users: My Fancy Query" - Cancel + Annuler OK diff --git a/src/Microsoft.Management.UI.Internal/resources/it/public.GraphicalHostResources.it.resx b/src/Microsoft.Management.UI.Internal/resources/it/public.GraphicalHostResources.it.resx index 2d6df859c89..3e876b3b1dd 100644 --- a/src/Microsoft.Management.UI.Internal/resources/it/public.GraphicalHostResources.it.resx +++ b/src/Microsoft.Management.UI.Internal/resources/it/public.GraphicalHostResources.it.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - OutGridViewWindow Object + Oggetto OutGridViewWindow \ No newline at end of file diff --git a/src/Microsoft.Management.UI.Internal/resources/it/public.XamlLocalizableResources.it.resx b/src/Microsoft.Management.UI.Internal/resources/it/public.XamlLocalizableResources.it.resx index 2231ee4929a..322452ffc40 100644 --- a/src/Microsoft.Management.UI.Internal/resources/it/public.XamlLocalizableResources.it.resx +++ b/src/Microsoft.Management.UI.Internal/resources/it/public.XamlLocalizableResources.it.resx @@ -118,66 +118,66 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Available Columns + Colonne disponibili - Add + Aggiungi - Remove + Rimuovi - Selected Columns + Colonne selezionate - Back + Indietro Localizable AutomationName for control that is used by accessibility screen readers. - Forward + Inoltra Localizable AutomationName for control that is used by accessibility screen readers. - Find in this column + Trova nella colonna Background text shown in the search box. - Expand + Espandi - Name + Nome - New Query + Nuova query - Tasks + Attività This is the title string for the Task Pane. - Tasks + Attività AutomationProperties.Name of a SeparatedList. - Indeterminate Progress Icon + Icona Avanzamento indeterminata - Add criteria + Aggiungi criteri - Overwrite the existing query or type a different name to save a new query. Each query consists of criteria, sorting, and column customizations. + Sovrascrivere la query esistente o digitare un altro nome per salvare la nuova query. Ogni query è costituita da criteri, personalizzazioni dell'ordinamento e delle colonne. - Ok + OK - Cancel + Annulla - Click to save a search query + Fare clic per salvare la query di ricerca - Available columns + Colonne disponibili >> @@ -188,104 +188,104 @@ The contents of a button which indicates that items will move from the right column to left column - Move up + Sposta su - Move down + Sposta giù OK - Cancel + Annulla - Select columns + Seleziona colonne - Move selected column to list of visible columns + Sposta le colonne selezionate nell'elenco delle colonne visibili - Move selected column to list of hidden columns + Sposta le colonne selezionate nell'elenco delle colonne nascoste - This column may not be removed. + Impossibile rimuovere la colonna. - The list must always display at least one column. + Nell'elenco deve essere visualizzata sempre almeno una colonna. - Selected columns + Colonne selezionate - Find in this column + Trova nella colonna - Expand + Espandi - Click to clear all filter criteria. + Fare clic per cancellare tutti i criteri di filtro. - Click to add search criteria. + Fare clic per aggiungere criteri di ricerca. - Click to expand search criteria. + Fare clic per espandere i criteri di ricerca. - There are currently no saved queries. + Non esistono query salvate. - Queries + Query - Delete + Elimina - Rename + Rinomina - {0} rule + {0} regola The text representation of a rule in the filter panel, displayed to accessibility clients. {0} will be the name of the rule. - Add + Aggiungi - Cancel + Annulla - Add Filter Criteria + Aggiungi criteri filtro - Value + Valore The name for text input fields <Empty> - Rules + Regole The name of the panel which contains the filter rules - Delete + Elimina Query - Queries + Query - Search + Cerca - ({0} of {1}) + ({0} di {1}) The text displayed in the management list title when the list has a filter applied. {0} will be the number of items shown in the list. {1} will be the total number of items in the list before filtering. - Searching... + Ricerca in corso... The text displayed in the management list title when the list is processing a filter. @@ -293,120 +293,120 @@ The text displayed in the management list title when the list does not have a filter applied. {0} will be the number of items shown in the list. - Filter + Filtra Localizable AutomationName for control that is used by accessibility screen readers. - Filter + Filtra - Shortcut Rules + Regole collegamento The name used to indicate custom filter rules which are specific to a particular application. - Columns Rules + Regole colonne The name used to indicate filter rules that are based upon the properties of the items in the list. - Sort Glyph + Glifo di ordinamento - Sort Glyph + Glifo di ordinamento - Collapse + Comprimi - Collapse + Comprimi - Sorted ascending + In ordine crescente The text used for the accessible ItemStatus property when a column is sorted ascending. - Sorted descending + In ordine decrescente The text used for the accessible ItemStatus property when a column is sorted descending. - Collapse + Comprimi - Expand + Espandi - Search + Cerca - Cancel + Annulla - Clear All + Deseleziona tutto - Clear All + Deseleziona tutto - Clear Search Text + Cancella testo da cercare - Tasks + Attività - Search + Cerca The accessible name of the Search button in the filter panel. - Cancel + Annulla The accessible name of the Stop Search button in the filter panel. - Expand or Collapse Filter Panel + Espandi o comprimi il riquadro del filtro The accessible name of the button that expands/collapses the filter panel. - Filter + Filtra The background text of the list's search box when filtering is immediate. - Click to display saved search queries. + Fare clic per visualizzare le query di ricerca salvate. - Filter applied. + Filtro applicato. - and + e The first header operator indicates that it is the first item in the list of filter rules. The AND value is used to indicate that it is and'ed with the above SearchBox. - and + e The header operator indicates that it is the first item in a group of filter rules which are the same. The AND value is used to indicate that it is and'ed with the other groups in the panel. - or + oppure The Item operator indicates that it is NOT the first item in a group of filter rules which are the same. The OR value is used to indicate that it is or'ed with the other items in the same group. - No matches found. + Non sono state trovate corrispondenze. The text displayed in the ManagementList when the filter has been applied but matching items were found. - Collapse + Comprimi - Expand + Espandi - Show Children + Mostra figlio - Show Children + Mostra figlio {0}: {1} The format string used for the ManagementList title when query has been applied. For example, "Users: My Fancy Query" - Cancel + Annulla OK diff --git a/src/Microsoft.Management.UI.Internal/resources/ja/public.GraphicalHostResources.ja.resx b/src/Microsoft.Management.UI.Internal/resources/ja/public.GraphicalHostResources.ja.resx index 2d6df859c89..5f77538dbfe 100644 --- a/src/Microsoft.Management.UI.Internal/resources/ja/public.GraphicalHostResources.ja.resx +++ b/src/Microsoft.Management.UI.Internal/resources/ja/public.GraphicalHostResources.ja.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - OutGridViewWindow Object + OutGridViewWindow オブジェクト \ No newline at end of file diff --git a/src/Microsoft.Management.UI.Internal/resources/ja/public.InvariantResources.ja.resx b/src/Microsoft.Management.UI.Internal/resources/ja/public.InvariantResources.ja.resx index 93e3e359006..63122368ee5 100644 --- a/src/Microsoft.Management.UI.Internal/resources/ja/public.InvariantResources.ja.resx +++ b/src/Microsoft.Management.UI.Internal/resources/ja/public.InvariantResources.ja.resx @@ -143,6 +143,6 @@ {0} は項目コレクションへの追加をサポートしていません。代わりに {1} を使用してください。 - If View is set to a {0}, it should have the type {1}. + ビューが {0} に設定されている場合、種類は {1} である必要があります。 \ No newline at end of file diff --git a/src/Microsoft.Management.UI.Internal/resources/ja/public.XamlLocalizableResources.ja.resx b/src/Microsoft.Management.UI.Internal/resources/ja/public.XamlLocalizableResources.ja.resx index b23115e35d8..da68543d008 100644 --- a/src/Microsoft.Management.UI.Internal/resources/ja/public.XamlLocalizableResources.ja.resx +++ b/src/Microsoft.Management.UI.Internal/resources/ja/public.XamlLocalizableResources.ja.resx @@ -118,23 +118,23 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Available Columns + 使用可能な列 - Add + 追加 - Remove + 削除 - Selected Columns + 選択された列 - Back + 戻る Localizable AutomationName for control that is used by accessibility screen readers. - Forward + 転送 Localizable AutomationName for control that is used by accessibility screen readers. @@ -142,42 +142,42 @@ Background text shown in the search box. - Expand + 展開します - Name + 名前 - New Query + 新しいクエリ - Tasks + タスク This is the title string for the Task Pane. - Tasks + タスク AutomationProperties.Name of a SeparatedList. - Indeterminate Progress Icon + 進行状況不定アイコン - Add criteria + 抽出条件の追加 - Overwrite the existing query or type a different name to save a new query. Each query consists of criteria, sorting, and column customizations. + 既存のクエリを上書きするか、新しいクエリとして保存するには別の名前を入力してください。各クエリは、条件、並べ替え、列のカスタマイズから構成されます。 - Ok + OK - Cancel + キャンセル クリックして検索クエリを保存 - Available columns + 使用可能な列 >> @@ -188,19 +188,19 @@ The contents of a button which indicates that items will move from the right column to left column - Move up + 上に移動 - Move down + 下に移動 OK - Cancel + キャンセル - Select columns + 列の選択 選択した列を、表示する列のリストに移動します @@ -215,13 +215,13 @@ リストには、少なくとも 1 つの列を常に表示する必要があります。 - Selected columns + 選択された列 この列を検索 - Expand + 展開します クリックすると、フィルター条件がすべて消去されます。 @@ -236,56 +236,56 @@ 現在、保存されているクエリはありません。 - Queries + クエリ - Delete + 削除 - Rename + 名前の変更 - {0} rule + {0} 件のルール The text representation of a rule in the filter panel, displayed to accessibility clients. {0} will be the name of the rule. - Add + 追加 - Cancel + キャンセル - Add Filter Criteria + フィルター条件の追加 - Value + 値 The name for text input fields <Empty> - Rules + ルール The name of the panel which contains the filter rules - Delete + 削除 - Query + クエリ - Queries + クエリ - Search + 検索 - ({0} of {1}) + ({0}/{1}) The text displayed in the management list title when the list has a filter applied. {0} will be the number of items shown in the list. {1} will be the total number of items in the list before filtering. - Searching... + 検索しています... The text displayed in the management list title when the list is processing a filter. @@ -293,70 +293,70 @@ The text displayed in the management list title when the list does not have a filter applied. {0} will be the number of items shown in the list. - Filter + フィルター Localizable AutomationName for control that is used by accessibility screen readers. - Filter + フィルター - Shortcut Rules + ショートカットの規則 The name used to indicate custom filter rules which are specific to a particular application. - Columns Rules + 列の規則 The name used to indicate filter rules that are based upon the properties of the items in the list. - Sort Glyph + グリフの並べ替え - Sort Glyph + グリフの並べ替え - Collapse + 折りたたみます - Collapse + 折りたたみます - Sorted ascending + 昇順に並べ替え済み The text used for the accessible ItemStatus property when a column is sorted ascending. - Sorted descending + 降順に並べ替え済み The text used for the accessible ItemStatus property when a column is sorted descending. - Collapse + 折りたたむ - Expand + 展開 - Search + 検索 - Cancel + キャンセル - Clear All + すべてクリア - Clear All + すべてクリア - Clear Search Text + 検索テキストのクリア - Tasks + タスク - Search + 検索 The accessible name of the Search button in the filter panel. - Cancel + キャンセル The accessible name of the Stop Search button in the filter panel. @@ -364,49 +364,49 @@ The accessible name of the button that expands/collapses the filter panel. - Filter + フィルター The background text of the list's search box when filtering is immediate. クリックすると、保存されている検索クエリが表示されます。 - Filter applied. + フィルターが適用されました。 - and + および The first header operator indicates that it is the first item in the list of filter rules. The AND value is used to indicate that it is and'ed with the above SearchBox. - and + および The header operator indicates that it is the first item in a group of filter rules which are the same. The AND value is used to indicate that it is and'ed with the other groups in the panel. - or + または The Item operator indicates that it is NOT the first item in a group of filter rules which are the same. The OR value is used to indicate that it is or'ed with the other items in the same group. - No matches found. + 一致するものが見つかりません。 The text displayed in the ManagementList when the filter has been applied but matching items were found. - Collapse + 折りたたみます - Expand + 展開します - Show Children + 子の表示 - Show Children + 子の表示 {0}: {1} The format string used for the ManagementList title when query has been applied. For example, "Users: My Fancy Query" - Cancel + キャンセル OK diff --git a/src/Microsoft.Management.UI.Internal/resources/pl/public.GraphicalHostResources.pl.resx b/src/Microsoft.Management.UI.Internal/resources/pl/public.GraphicalHostResources.pl.resx index 2d6df859c89..881faee81ef 100644 --- a/src/Microsoft.Management.UI.Internal/resources/pl/public.GraphicalHostResources.pl.resx +++ b/src/Microsoft.Management.UI.Internal/resources/pl/public.GraphicalHostResources.pl.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - OutGridViewWindow Object + Obiekt OutGridViewWindow \ No newline at end of file diff --git a/src/Microsoft.Management.UI.Internal/resources/pl/public.InvariantResources.pl.resx b/src/Microsoft.Management.UI.Internal/resources/pl/public.InvariantResources.pl.resx index e1c8b515ac0..9f7d50f7349 100644 --- a/src/Microsoft.Management.UI.Internal/resources/pl/public.InvariantResources.pl.resx +++ b/src/Microsoft.Management.UI.Internal/resources/pl/public.InvariantResources.pl.resx @@ -118,7 +118,7 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - {0} cannot be modified directly, use {1} instead. + {0} nie można modyfikować bezpośrednio, zamiast tego użyj {1}. Kolumny @@ -140,9 +140,9 @@ The format string that is used by the InnerList in the case where a whole number type is used. The {0} will be the column value. - {0} does not support adding to the Items collection, use {1} instead. + {0} nie obsługuje czynności dodawania do kolekcji obiektów, użyj zamiennie {1}. - If View is set to a {0}, it should have the type {1}. + Jeśli dla parametru Widok ustawiono wartość {0}, powinien on mieć typ {1}. \ No newline at end of file diff --git a/src/Microsoft.Management.UI.Internal/resources/pl/public.XamlLocalizableResources.pl.resx b/src/Microsoft.Management.UI.Internal/resources/pl/public.XamlLocalizableResources.pl.resx index 2231ee4929a..c6ebea75cc0 100644 --- a/src/Microsoft.Management.UI.Internal/resources/pl/public.XamlLocalizableResources.pl.resx +++ b/src/Microsoft.Management.UI.Internal/resources/pl/public.XamlLocalizableResources.pl.resx @@ -118,66 +118,66 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Available Columns + Dostępne kolumny - Add + Dodaj - Remove + Usuń - Selected Columns + Wybrane kolumny - Back + Do tyłu Localizable AutomationName for control that is used by accessibility screen readers. - Forward + Do przodu Localizable AutomationName for control that is used by accessibility screen readers. - Find in this column + Znajdź w tej kolumnie Background text shown in the search box. - Expand + Rozwiń - Name + Nazwa - New Query + Nowe zapytanie - Tasks + Zadania This is the title string for the Task Pane. - Tasks + Zadania AutomationProperties.Name of a SeparatedList. - Indeterminate Progress Icon + Ikona nieokreślonego postępu - Add criteria + Dodaj kryteria - Overwrite the existing query or type a different name to save a new query. Each query consists of criteria, sorting, and column customizations. + Zastąp istniejące zapytanie lub wprowadź inną nazwę, pod którą zostanie zapisane nowe zapytanie. Każde zapytanie składa się z kryteriów, dostosowań sortowania i kolumn. - Ok + OK - Cancel + Anuluj - Click to save a search query + Kliknij, aby zapisać zapytanie wyszukiwania - Available columns + Dostępne kolumny >> @@ -188,104 +188,104 @@ The contents of a button which indicates that items will move from the right column to left column - Move up + Przenieś w górę - Move down + Przenieś w dół OK - Cancel + Anuluj - Select columns + Wybierz kolumny - Move selected column to list of visible columns + Przenieś wybraną kolumnę do listy widocznych kolumn - Move selected column to list of hidden columns + Przenieś wybraną kolumnę do listy ukrytych kolumn - This column may not be removed. + Nie można usunąć tej kolumny. - The list must always display at least one column. + Lista musi zawsze zawierać przynajmniej jedna kolumnę. - Selected columns + Wybrane kolumny - Find in this column + Znajdź w tej kolumnie - Expand + Rozwiń - Click to clear all filter criteria. + Kliknij, aby wyczyścić wszystkie kryteria filtrowania. - Click to add search criteria. + Kliknij, aby dodać kryteria wyszukiwania. - Click to expand search criteria. + Kliknij, aby rozwinąć kryteria wyszukiwania. - There are currently no saved queries. + Obecnie nie ma zapisanych zapytań. - Queries + Zapytania - Delete + Usuń - Rename + Zmień nazwę - {0} rule + {0} reguła The text representation of a rule in the filter panel, displayed to accessibility clients. {0} will be the name of the rule. - Add + Dodaj - Cancel + Anuluj - Add Filter Criteria + Dodaj kryteria filtrowania - Value + Wartość The name for text input fields - <Empty> + <Puste> - Rules + Reguły The name of the panel which contains the filter rules - Delete + Usuń - Query + Zapytanie - Queries + Zapytania - Search + Wyszukaj - ({0} of {1}) + ({0} z {1}) The text displayed in the management list title when the list has a filter applied. {0} will be the number of items shown in the list. {1} will be the total number of items in the list before filtering. - Searching... + Trwa wyszukiwanie... The text displayed in the management list title when the list is processing a filter. @@ -293,120 +293,120 @@ The text displayed in the management list title when the list does not have a filter applied. {0} will be the number of items shown in the list. - Filter + Filtruj Localizable AutomationName for control that is used by accessibility screen readers. - Filter + Filtruj - Shortcut Rules + Zasady skrótów The name used to indicate custom filter rules which are specific to a particular application. - Columns Rules + Zasady kolumn The name used to indicate filter rules that are based upon the properties of the items in the list. - Sort Glyph + Symbol sortowania - Sort Glyph + Symbol sortowania - Collapse + Zwiń - Collapse + Zwiń - Sorted ascending + Posortowane rosnąco The text used for the accessible ItemStatus property when a column is sorted ascending. - Sorted descending + Posortowane malejąco The text used for the accessible ItemStatus property when a column is sorted descending. - Collapse + Zwiń - Expand + Rozwiń - Search + Wyszukaj - Cancel + Anuluj - Clear All + Wyczyść wszystko - Clear All + Wyczyść wszystko - Clear Search Text + Wyczyść tekst wyszukiwania - Tasks + Zadania - Search + Wyszukaj The accessible name of the Search button in the filter panel. - Cancel + Anuluj The accessible name of the Stop Search button in the filter panel. - Expand or Collapse Filter Panel + Rozwiń lub zwiń panel filtra The accessible name of the button that expands/collapses the filter panel. - Filter + Filtruj The background text of the list's search box when filtering is immediate. - Click to display saved search queries. + Kliknij, aby wyświetlić zapisane kwerendy wyszukiwania. - Filter applied. + Zastosowano filtr. - and + i The first header operator indicates that it is the first item in the list of filter rules. The AND value is used to indicate that it is and'ed with the above SearchBox. - and + i The header operator indicates that it is the first item in a group of filter rules which are the same. The AND value is used to indicate that it is and'ed with the other groups in the panel. - or + lub The Item operator indicates that it is NOT the first item in a group of filter rules which are the same. The OR value is used to indicate that it is or'ed with the other items in the same group. - No matches found. + Nie znaleziono dopasowań. The text displayed in the ManagementList when the filter has been applied but matching items were found. - Collapse + Zwiń - Expand + Rozwiń - Show Children + Pokaż elementy podrzędne - Show Children + Pokaż elementy podrzędne {0}: {1} The format string used for the ManagementList title when query has been applied. For example, "Users: My Fancy Query" - Cancel + Anuluj OK diff --git a/src/Microsoft.Management.UI.Internal/resources/ru/public.GraphicalHostResources.ru.resx b/src/Microsoft.Management.UI.Internal/resources/ru/public.GraphicalHostResources.ru.resx index 2d6df859c89..ea281ed502c 100644 --- a/src/Microsoft.Management.UI.Internal/resources/ru/public.GraphicalHostResources.ru.resx +++ b/src/Microsoft.Management.UI.Internal/resources/ru/public.GraphicalHostResources.ru.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - OutGridViewWindow Object + Объект OutGridViewWindow \ No newline at end of file diff --git a/src/Microsoft.Management.UI.Internal/resources/ru/public.InvariantResources.ru.resx b/src/Microsoft.Management.UI.Internal/resources/ru/public.InvariantResources.ru.resx index a14bccf0c61..1e98456d841 100644 --- a/src/Microsoft.Management.UI.Internal/resources/ru/public.InvariantResources.ru.resx +++ b/src/Microsoft.Management.UI.Internal/resources/ru/public.InvariantResources.ru.resx @@ -118,7 +118,7 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - {0} cannot be modified directly, use {1} instead. + Не удается изменить {0} напрямую. Используйте {1}. Столбцы @@ -140,9 +140,9 @@ The format string that is used by the InnerList in the case where a whole number type is used. The {0} will be the column value. - {0} does not support adding to the Items collection, use {1} instead. + {0} не поддерживает добавление в коллекцию элементов. Используйте {1}. - If View is set to a {0}, it should have the type {1}. + Если задано представление {0}, его тип должен быть {1}. \ No newline at end of file diff --git a/src/Microsoft.Management.UI.Internal/resources/ru/public.XamlLocalizableResources.ru.resx b/src/Microsoft.Management.UI.Internal/resources/ru/public.XamlLocalizableResources.ru.resx index 2231ee4929a..fc923248252 100644 --- a/src/Microsoft.Management.UI.Internal/resources/ru/public.XamlLocalizableResources.ru.resx +++ b/src/Microsoft.Management.UI.Internal/resources/ru/public.XamlLocalizableResources.ru.resx @@ -118,66 +118,66 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Available Columns + Доступные столбцы - Add + Добавить - Remove + Удалить - Selected Columns + Выбранные столбцы - Back + Назад Localizable AutomationName for control that is used by accessibility screen readers. - Forward + Переадресовать Localizable AutomationName for control that is used by accessibility screen readers. - Find in this column + Найти в этом столбце Background text shown in the search box. - Expand + Развернуть - Name + Имя - New Query + Новый запрос - Tasks + Задачи This is the title string for the Task Pane. - Tasks + Задачи AutomationProperties.Name of a SeparatedList. - Indeterminate Progress Icon + Не определен значок хода выполнения - Add criteria + Добавить условия - Overwrite the existing query or type a different name to save a new query. Each query consists of criteria, sorting, and column customizations. + Замените существующий запрос или введите другое имя, чтобы сохранить новый запрос. Каждый запрос состоит из условий, настроек сортировки и отображения столбцов. - Ok + OK - Cancel + Отмена - Click to save a search query + Щелкните, чтобы сохранить поисковый запрос - Available columns + Доступные столбцы >> @@ -188,104 +188,104 @@ The contents of a button which indicates that items will move from the right column to left column - Move up + Переместить вверх - Move down + Переместить вниз - OK + ОК - Cancel + Отмена - Select columns + Выберите столбцы - Move selected column to list of visible columns + Переместить выбранный столбец в список видимых столбцов. - Move selected column to list of hidden columns + Переместить выделенный столбец в список скрытых столбцов. - This column may not be removed. + Данный столбец удалять нельзя. - The list must always display at least one column. + В списке всегда должен отображаться хотя бы один столбец. - Selected columns + Выбранные столбцы - Find in this column + Найти в этом столбце - Expand + Развернуть - Click to clear all filter criteria. + Щелкните здесь, чтобы очистить все условия фильтра. - Click to add search criteria. + Щелкните здесь, чтобы добавить условие поиска. - Click to expand search criteria. + Щелкните, чтобы развернуть условие поиска. - There are currently no saved queries. + На данный момент сохраненных запросов нет. - Queries + Запросы - Delete + Удалить - Rename + Переименовать - {0} rule + Правило {0} The text representation of a rule in the filter panel, displayed to accessibility clients. {0} will be the name of the rule. - Add + Добавить - Cancel + Отмена - Add Filter Criteria + Добавить условия фильтра - Value + Значение The name for text input fields - <Empty> + <Пусто> - Rules + Правила The name of the panel which contains the filter rules - Delete + Удалить - Query + Запрос - Queries + Запросы - Search + Поиск - ({0} of {1}) + ({0} из {1}) The text displayed in the management list title when the list has a filter applied. {0} will be the number of items shown in the list. {1} will be the total number of items in the list before filtering. - Searching... + Поиск… The text displayed in the management list title when the list is processing a filter. @@ -293,122 +293,122 @@ The text displayed in the management list title when the list does not have a filter applied. {0} will be the number of items shown in the list. - Filter + Фильтр Localizable AutomationName for control that is used by accessibility screen readers. - Filter + Фильтр - Shortcut Rules + Правила ярлыков The name used to indicate custom filter rules which are specific to a particular application. - Columns Rules + Правила столбцов The name used to indicate filter rules that are based upon the properties of the items in the list. - Sort Glyph + Глиф сортировки - Sort Glyph + Глиф сортировки - Collapse + Свернуть - Collapse + Свернуть - Sorted ascending + Отсортировано по возрастанию The text used for the accessible ItemStatus property when a column is sorted ascending. - Sorted descending + Отсортировано по убыванию The text used for the accessible ItemStatus property when a column is sorted descending. - Collapse + Свернуть - Expand + Развернуть - Search + Поиск - Cancel + Отмена - Clear All + Очистить все - Clear All + Очистить все - Clear Search Text + Очистить текст поиска - Tasks + Задачи - Search + Поиск The accessible name of the Search button in the filter panel. - Cancel + Отмена The accessible name of the Stop Search button in the filter panel. - Expand or Collapse Filter Panel + Развернуть или свернуть панель фильтра The accessible name of the button that expands/collapses the filter panel. - Filter + Фильтр The background text of the list's search box when filtering is immediate. - Click to display saved search queries. + Просмотр сведений о сохраненных запросах поиска. - Filter applied. + Фильтр применен. - and + и The first header operator indicates that it is the first item in the list of filter rules. The AND value is used to indicate that it is and'ed with the above SearchBox. - and + и The header operator indicates that it is the first item in a group of filter rules which are the same. The AND value is used to indicate that it is and'ed with the other groups in the panel. - or + или The Item operator indicates that it is NOT the first item in a group of filter rules which are the same. The OR value is used to indicate that it is or'ed with the other items in the same group. - No matches found. + Соответствий не найдено. The text displayed in the ManagementList when the filter has been applied but matching items were found. - Collapse + Свернуть - Expand + Развернуть - Show Children + Показать дочерние объекты - Show Children + Показать дочерние объекты {0}: {1} The format string used for the ManagementList title when query has been applied. For example, "Users: My Fancy Query" - Cancel + Отмена - OK + ОК \ No newline at end of file diff --git a/src/Microsoft.Management.UI.Internal/resources/tr/public.GraphicalHostResources.tr.resx b/src/Microsoft.Management.UI.Internal/resources/tr/public.GraphicalHostResources.tr.resx index 2d6df859c89..602da5ea83e 100644 --- a/src/Microsoft.Management.UI.Internal/resources/tr/public.GraphicalHostResources.tr.resx +++ b/src/Microsoft.Management.UI.Internal/resources/tr/public.GraphicalHostResources.tr.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - OutGridViewWindow Object + OutGridViewWindow Nesnesi \ No newline at end of file diff --git a/src/Microsoft.Management.UI.Internal/resources/tr/public.InvariantResources.tr.resx b/src/Microsoft.Management.UI.Internal/resources/tr/public.InvariantResources.tr.resx index f6b61cb6b86..e6168a47fd8 100644 --- a/src/Microsoft.Management.UI.Internal/resources/tr/public.InvariantResources.tr.resx +++ b/src/Microsoft.Management.UI.Internal/resources/tr/public.InvariantResources.tr.resx @@ -118,7 +118,7 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - {0} cannot be modified directly, use {1} instead. + {0} doğrudan değiştirilemiyor, bunun yerine {1} kullanın. Sütunlar @@ -140,9 +140,9 @@ The format string that is used by the InnerList in the case where a whole number type is used. The {0} will be the column value. - {0} does not support adding to the Items collection, use {1} instead. + {0} Öğeler koleksiyonuna eklenmeyi desteklemiyor, bunun yerine {1} kullanın. - If View is set to a {0}, it should have the type {1}. + Görünüm {0} olarak ayarlanırsa {1} türünde olmalıdır. \ No newline at end of file diff --git a/src/Microsoft.Management.UI.Internal/resources/zh-Hans/public.InvariantResources.zh-Hans.resx b/src/Microsoft.Management.UI.Internal/resources/zh-Hans/public.InvariantResources.zh-Hans.resx index ba5290cebca..7809267d7bc 100644 --- a/src/Microsoft.Management.UI.Internal/resources/zh-Hans/public.InvariantResources.zh-Hans.resx +++ b/src/Microsoft.Management.UI.Internal/resources/zh-Hans/public.InvariantResources.zh-Hans.resx @@ -143,6 +143,6 @@ {0} 不支持添加到项目集合，请改用 {1}。 - If View is set to a {0}, it should have the type {1}. + 如果“视图”设置为 {0}，则它应该具有类型 {1}。 \ No newline at end of file diff --git a/src/Microsoft.Management.UI.Internal/resources/zh-Hant/public.GraphicalHostResources.zh-Hant.resx b/src/Microsoft.Management.UI.Internal/resources/zh-Hant/public.GraphicalHostResources.zh-Hant.resx index 2d6df859c89..0b11ef87f16 100644 --- a/src/Microsoft.Management.UI.Internal/resources/zh-Hant/public.GraphicalHostResources.zh-Hant.resx +++ b/src/Microsoft.Management.UI.Internal/resources/zh-Hant/public.GraphicalHostResources.zh-Hant.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - OutGridViewWindow Object + OutGridViewWindow 物件 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/cs/RunspaceStrings.cs.resx b/src/System.Management.Automation/resources/cs/RunspaceStrings.cs.resx index c2274ab7ed1..3e5c659135f 100644 --- a/src/System.Management.Automation/resources/cs/RunspaceStrings.cs.resx +++ b/src/System.Management.Automation/resources/cs/RunspaceStrings.cs.resx @@ -118,126 +118,126 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The runspace state is not valid for this operation. + Stav prostředí runspace není pro tuto operaci platný. - Cannot open the runspace because the runspace is not in the BeforeOpen state. Current state of the runspace is '{0}'. + Prostředí runspace nelze otevřít, protože není ve stavu BeforeOpen. Aktuální stav prostředí runspace je {0}. - Cannot perform the operation because the runspace is not in the Opened state. Current state of the runspace is '{0}'. + Operaci nelze provést, protože prostředí runspace není ve stavu Otevřeno. Aktuální stav prostředí runspace je {0}. - Cannot invoke the pipeline because the runspace is not in the Opened state. Current state of the runspace is '{0}'. + Kanál nelze vyvolat, protože prostředí runspace není ve stavu Otevřeno. Aktuální stav prostředí runspace je {0}. - The pipeline state is not valid for this operation. + Stav kanálu není pro tuto operaci platný. - Cannot invoke pipeline because it has already been invoked. + Kanál nelze vyvolat, protože už byl vyvolán. - The valid value for the parameter is PipelineResultTypes.Output. + Platná hodnota parametru je PipelineResultTypes.Output. - The pipeline does not contain a command. + Kanál neobsahuje žádný příkaz. - The pipeline was not run because a pipeline is already running. Pipelines cannot be run concurrently. + Kanál nebyl spuštěn, protože už je spuštěný jiný kanál. Kanály nelze spouštět souběžně. - A nested pipeline cannot be invoked asynchronously. Use the Invoke method. + Vnořený kanál nelze vyvolat asynchronně. Použijte metodu Invoke. - You should only run a nested pipeline from within a running pipeline. + Vnořený kanál byste měli spouštět pouze z běžícího kanálu. - Runspace cannot be closed while a SessionStateProxy method call is in progress. + Prostředí runspace nelze zavřít, když probíhá volání metody SessionStateProxy. - Pipeline cannot be invoked while a SessionStateProxy method call is in progress. + Kanál nelze vyvolat, když probíhá volání metody SessionStateProxy. - A SessionStateProxy method call is in progress. Concurrent SessionStateProxy method calls are not allowed. + Probíhá volání metody SessionStateProxy. Souběžná volání metod SessionStateProxy nejsou povolena. - A pipeline is already running. Concurrent SessionStateProxy method calls are not allowed. + Kanál je již spuštěný. Souběžná volání metod SessionStateProxy nejsou povolena. - This property cannot be changed after the runspace has been opened. + Tuto vlastnost nelze po otevření prostředí runspace změnit. - One or more errors occurred processing the module '{0}' specified in the InitialSessionState object used to create this runspace. See the ErrorRecords property for a complete list of errors. The first error was: {1} + Při zpracování modulu {0} zadaného v objektu InitialSessionState použitém k vytvoření tohoto prostředí runspace došlo k jedné nebo více chybám. Úplný seznam chyb najdete ve vlastnosti ErrorRecords. První chyba byla: {1} - The thread options can only be changed if the apartment state is multithreaded apartment (MTA), the current options are UseNewThread or UseCurrentThread, and the new value is ReuseThread. + Možnosti vláken lze změnit pouze v případě, že je stav neutrálního objektu apartment nastavený na model MTA (multithreaded apartment). Aktuální možnosti jsou UseNewThread nebo UseCurrentThread a nová hodnota je ReuseThread. - {0} cannot be false when language mode is {1} or {2}. + {0} nemůže mít hodnotu false, pokud je jazykový režim {1} nebo {2}. - You cannot disconnect a local-only runspace. + Prostředí runspace, které je pouze místní, nelze odpojit. - The Connect operation is not supported on local runspaces. + Operace Connect není v místních prostředích runspace podporována. - The session is busy. You will be connected to the session as soon as it is available. To cancel the Enter-PSSession command, press Ctrl-C. + Relace je zaneprázdněna. Jakmile bude relace dostupná, budete k ní připojeni. Pokud chcete zrušit příkaz Enter-PSSession, stiskněte Ctrl+C. - The command cannot be completed. Script invocation is not supported in this session configuration. This can occur if the session configuration is in no-language mode. + Příkaz nelze dokončit. Spouštění skriptů není v této konfiguraci relace podporováno. K tomu může dojít, pokud je konfigurace relace v režimu bez jazyka. - You cannot use Disconnect and Connect operations on local runspaces. + Operace Disconnect a Connect nelze používat v místních prostředích runspace. - Cannot connect the pipeline because the runspace is not in the Opened state. Current state of runspace is '{0}'. + Kanál se nedá připojit, protože prostředí runspace není ve stavu Otevřeno. Aktuální stav prostředí runspace je {0}. - Cannot construct a RemoteRunspace. The provided RunspacePool object is not valid. + RemoteRunspace nelze vytvořit. Zadaný objekt RunspacePool není platný. - There is no disconnected command associated with this runspace. + K tomuto prostředí runspace není přidružen žádný odpojený příkaz. - The disconnection operation is not supported on the remote computer. To support disconnecting, the remote computer must be running Windows PowerShell 3.0 or a later version of Windows PowerShell and using the WSMan transport. + Operace odpojení není ve vzdáleném počítači podporována. Aby bylo možné odpojení, musí být na vzdáleném počítači spuštěný Windows PowerShell 3.0 nebo novější verze Windows PowerShellu a musí se používat přenos WSMan. - Cannot connect the PSSession because the session is not in the Disconnected state, or is not available for connection. + K relaci PSSession se nelze připojit, protože relace není ve stavu Odpojeno nebo není pro připojení dostupná. - Value for parameter cannot be PipelineResultTypes.None or PipelineResultTypes.Output. + Hodnota parametru nemůže být PipelineResultTypes.None ani PipelineResultTypes.Output. - Valid values for the parameter are PipelineResultTypes.Output or PipelineResultTypes.Null. + Platné hodnoty parametru jsou PipelineResultTypes.Output nebo PipelineResultTypes.Null. - Debug stream redirection is not supported on the targeted remote computer. + Přesměrování streamu ladění není na cílovém vzdáleném počítači podporováno. - Verbose stream redirection is not supported on the targeted remote computer. + Přesměrování streamu podrobností není na cílovém vzdáleném počítači podporováno. - Warning stream redirection is not supported on the targeted remote computer. + Přesměrování streamu upozornění není na cílovém vzdáleném počítači podporováno. - Information stream redirection is not supported on the targeted remote computer. + Přesměrování datového proudu informací není v cílovém vzdáleném počítači podporováno. - You have entered a session that is busy running a command or script. Because output is routed to job "{0}", you will not see output in the console. You can wait for the running command to finish, or cancel the command and get an input prompt by pressing Ctrl-C. + Vstoupili jste do relace, která je zaneprázdněná spuštěním příkazu nebo skriptu. Vzhledem k tomu, že výstup je směrován do úlohy {0}, nezobrazí se v konzole výstup. Můžete počkat na dokončení spuštěného příkazu nebo příkaz zrušit a stisknutím Ctrl+C zobrazit výzvu k zadání vstupu. - You have entered a session that is busy running a command or script and output will be displayed in the console. You can wait for the running command to finish or cancel it and get an input prompt by pressing Ctrl-C. + Vstoupili jste do relace, ve které je právě spuštěn příkaz nebo skript. Výstup se zobrazí v konzole. Můžete počkat na dokončení spuštěného příkazu nebo ho zrušit a stisknutím Ctrl+C zobrazit výzvu k zadání vstupu. - You have entered a session that is currently stopped at a debug breakpoint inside a running command or script. Use the PowerShell command line debugger to continue debugging. + Vstoupili jste do relace, která je právě zastavena na zarážce ladění ve spuštěném příkazu nebo skriptu. K pokračování v ladění použijte ladicí program příkazového řádku PowerShellu. - DefaultRunspace must be a LocalRunspace + DefaultRunspace musí být LocalRunspace. - The static PrimaryRunspace property can only be set once, and has already been set. + Statickou vlastnost PrimaryRunspace lze nastavit pouze jednou a už byla nastavena. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/cs/SessionStateStrings.cs.resx b/src/System.Management.Automation/resources/cs/SessionStateStrings.cs.resx index 67360500c67..56dc99ffbd4 100644 --- a/src/System.Management.Automation/resources/cs/SessionStateStrings.cs.resx +++ b/src/System.Management.Automation/resources/cs/SessionStateStrings.cs.resx @@ -118,540 +118,540 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot process the returned information because the information returned from the provider's Start method was for a different provider than the one passed. + Vrácené informace nelze zpracovat, protože informace vrácené metodou Start poskytovatele se týkaly jiného než předaného poskytovatele. - Cannot process the returned information because the information returned from the provider's Start method was null. + Vrácené informace nelze zpracovat, protože informace vrácené metodou Start poskytovatele mají hodnotu null. - Attempting to perform the GetItem operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace GetItem u poskytovatele {0} pro cestu {1} se nezdařil. {2} - The dynamic parameters for the GetItem operation cannot be retrieved from the '{0}' provider for path '{1}'. {2} + Dynamické parametry pro operaci GetItem nelze načíst od poskytovatele {0} pro cestu {1}. {2} - Attempting to perform the SetItem operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace SetItem u poskytovatele {0} pro cestu {1} se nezdařil. {2} - The dynamic parameters for the SetItem operation cannot be retrieved from the '{0}' provider for path '{1}'. {2} + Dynamické parametry pro operaci SetItem nelze načíst od poskytovatele {0} pro cestu {1}. {2} - Attempting to perform the ClearItem operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace ClearItem u poskytovatele {0} pro cestu {1} se nezdařil. {2} - Attempting to perform the InvokeDefaultAction operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace InvokeDefaultAction u poskytovatele {0} pro cestu {1} se nezdařil. {2} - The dynamic parameters for the InvokeDefaultAction operation cannot be retrieved from the '{0}' provider for path '{1}'. {2} + Dynamické parametry pro operaci InvokeDefaultAction nelze načíst od poskytovatele {0} pro cestu {1}. {2} - Attempting to perform the ItemExists operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace ItemExists u poskytovatele {0} pro cestu {1} se nezdařil. {2} - The dynamic parameters for the ItemExists operation cannot be retrieved from the '{0}' provider for path '{1}'. {2} + Dynamické parametry pro operaci ItemExists nelze načíst od poskytovatele {0} pro cestu {1}. {2} - Attempting to perform the IsValidPath operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace IsValidPath u poskytovatele {0} pro cestu {1} se nezdařil. {2} - Attempting to perform the IsItemContainer operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace IsItemContainer u poskytovatele {0} pro cestu {1} se nezdařil. {2} - Attempting to perform the RemoveItem operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace RemoveItem u poskytovatele {0} pro cestu {1} se nezdařil. {2} - Attempting to perform the GetChildItems operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace GetChildItems u poskytovatele {0} pro cestu {1} se nezdařil. {2} - The dynamic parameters for the GetChildItems operation cannot be retrieved from the '{0}' provider for path '{1}'. {2} + Dynamické parametry pro operaci GetChildItems nelze načíst od poskytovatele {0} pro cestu {1}. {2} - Attempting to perform the GetChildNames operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace GetChildNames u poskytovatele {0} pro cestu {1} se nezdařil. {2} - The dynamic parameters for the GetChildNames operation cannot be retrieved from the '{0}' provider for path '{1}'. {2} + Dynamické parametry pro operaci GetChildNames nelze načíst od poskytovatele {0} pro cestu {1}. {2} - Attempting to perform the RenameItem operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace RenameItem u poskytovatele {0} pro cestu {1} se nezdařil. {2} - The dynamic parameters for the RenameItem operation cannot be retrieved from the '{0}' provider for path '{1}'. {2} + Dynamické parametry pro operaci RenameItem nelze načíst od poskytovatele {0} pro cestu {1}. {2} - Attempting to perform the NewItem operation on the '{0}' provider failed for the path '{1}'. {2} + Pokus o provedení operace NewItem u poskytovatele {0} pro cestu {1} se nezdařil. {2} - The dynamic parameters for the NewItem operation cannot be retrieved from the '{0}' provider for path '{1}'. {2} + Dynamické parametry pro operaci NewItem nelze načíst od poskytovatele {0} pro cestu {1}. {2} - Attempting to perform the HasChildItems operation on the '{0}' provider failed for the path '{1}'. {2} + Pokus o provedení operace HasChildItems u poskytovatele {0} pro cestu {1} se nezdařil. {2} - Attempting to perform the CopyItem operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace CopyItem u poskytovatele {0} pro cestu {1} se nezdařil. {2} - The dynamic parameters for the CopyItem operation cannot be retrieved from the '{0}' provider for path '{1}'. {2} + Dynamické parametry pro operaci CopyItem nelze načíst od poskytovatele {0} pro cestu {1}. {2} - Attempting to perform the GetParentPath operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace GetParentPath u poskytovatele {0} pro cestu {1} se nezdařil. {2} - Attempting to perform the NormalizeRelativePath operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace NormalizeRelativePath u poskytovatele {0} pro cestu {1} se nezdařil. {2} - Attempting to perform the MakePath operation operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace MakePath u poskytovatele {0} pro cestu {1} se nezdařil. {2} - Attempting to perform the GetChildName operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace GetChildName u poskytovatele {0} pro cestu {1} se nezdařil. {2} - Attempting to perform the MoveItem operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace MoveItem u poskytovatele {0} pro cestu {1} se nezdařil. {2} - The dynamic parameters for the MoveItem operation cannot be retrieved from the '{0}' provider for path '{1}'. {2} + Dynamické parametry pro operaci MoveItem nelze načíst od poskytovatele {0} pro cestu {1}. {2} - Attempting to perform the GetProperty operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace GetProperty u poskytovatele {0} pro cestu {1} se nezdařil. {2} - The dynamic parameters for the GetProperty operation cannot be retrieved from the '{0}' provider for path '{1}'. {2} + Dynamické parametry pro operaci GetProperty nelze načíst od poskytovatele {0} pro cestu {1}. {2} - Attempting to perform the SetProperty operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace SetProperty u poskytovatele {0} pro cestu {1} se nezdařil. {2} - The dynamic parameters for the SetProperty operation cannot be retrieved from the '{0}' provider for path '{1}'. {2} + Dynamické parametry pro operaci SetProperty nelze načíst od poskytovatele {0} pro cestu {1}. {2} - Attempting to perform the ClearProperty operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace ClearProperty u poskytovatele {0} pro cestu {1} se nezdařil. {2} - The dynamic parameters for the ClearProperty operation cannot be retrieved from the '{0}' provider for path '{1}'. {2} + Dynamické parametry pro operaci ClearProperty nelze načíst od poskytovatele {0} pro cestu {1}. {2} - Attempting to perform the NewProperty operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace NewProperty u poskytovatele {0} pro cestu {1} se nezdařil. {2} - The dynamic parameters for the NewProperty operation cannot be retrieved from the '{0}' provider for path '{1}'. {2} + Dynamické parametry pro operaci NewProperty nelze načíst od poskytovatele {0} pro cestu {1}. {2} - Attempting to perform the RemoveProperty operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace RemoveProperty u poskytovatele {0} pro cestu {1} se nezdařil. {2} - The dynamic parameters for the RemoveProperty operation cannot be retrieved from the '{0}' provider for path '{1}'. {2} + Dynamické parametry pro operaci RemoveProperty nelze načíst od poskytovatele {0} pro cestu {1}. {2} - Attempting to perform the CopyProperty operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace CopyProperty u poskytovatele {0} pro cestu {1} se nezdařil. {2} - The dynamic parameters for the CopyProperty operation cannot be retrieved for the '{0}' provider for path '{1}'. {2} + Dynamické parametry pro operaci CopyProperty nelze načíst od poskytovatele {0} pro cestu {1}. {2} - Attempting to perform the MoveProperty operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace MoveProperty u poskytovatele {0} pro cestu {1} se nezdařil. {2} - The dynamic parameters for the MoveProperty operation cannot be retrieved for the '{0}' provider for path '{1}'. {2} + Dynamické parametry pro operaci MoveProperty nelze načíst od poskytovatele {0} pro cestu {1}. {2} - Attempting to perform the RenameProperty operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace RenameProperty u poskytovatele {0} pro cestu {1} se nezdařil. {2} - Dynamic parameters for RenameProperty cannot be retrieved for the '{0}' provider for path '{1}'. {2} + Dynamické parametry pro RenameProperty nelze načíst pro poskytovatele {0} pro cestu {1}. {2} - Content reader cannot be retrieved for the '{0}' provider for the path '{1}'. {2} + Čtečku obsahu nelze načíst pro poskytovatele {0} a cestu {1}. {2} - The dynamic parameters for the GetContentReader operation cannot be retrieved for the '{0}' provider for path '{1}'. {2} + Dynamické parametry pro operaci GetContentReader nelze načíst od poskytovatele {0} pro cestu {1}. {2} - Content writer cannot be retrieved for the '{0}' provider for the path '{1}'. {2} + Zapisovač obsahu nelze načíst pro poskytovatele {0} a cestu {1}. {2} - The dynamic parameters for the GetContentWriter operation cannot be retrieved for the '{0}' provider for path '{1}'. {2} + Dynamické parametry pro operaci GetContentWriter nelze načíst od poskytovatele {0} pro cestu {1}. {2} - Unable to get content because it is a directory: '{0}'. Please use 'Get-ChildItem' instead. + Obsah nelze získat, protože se jedná o adresář: {0}. Místo toho prosím použijte Get-ChildItem. - Unable to write content because it is a directory: '{0}'. + Obsah nelze zapsat, protože se jedná o adresář: {0}. - There is no location history left to navigate backwards. + V historii umístění už nejsou žádné položky, ke kterým by bylo možné přejít zpět. - There is no location history left to navigate forwards. + V historii umístění už nejsou žádné položky, ke kterým by bylo možné přejít vpřed. - The BoundedStack is empty. + BoundedStack je prázdný. - Attempting to perform the ClearContent operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace ClearContent u poskytovatele {0} pro cestu {1} se nezdařil. {2} - Unable to clear content of '{0}' because it is a directory. Clear-Content is only supported on files. + Obsah položky {0} nelze vymazat, protože se jedná o adresář. Operace Clear-Content je podporována pouze u souborů. - The dynamic parameters for the ClearContent operation cannot be retrieved from the '{0}' provider for path '{1}'. {2} + Dynamické parametry pro operaci ClearContent nelze načíst od poskytovatele {0} pro cestu {1}. {2} - Attempting to perform the GetSecurityDescriptor operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace GetSecurityDescriptor u poskytovatele {0} pro cestu {1} se nezdařil. {2} - Attempting to perform the SetSecurityDescriptor operation on the '{0}' provider failed for path '{1}'. {2} + Pokus o provedení operace SetSecurityDescriptor u poskytovatele {0} pro cestu {1} se nezdařil. {2} - Attempting to perform the Start operation on the '{0}' provider failed. {1} + Pokus o provedení operace Start u poskytovatele {0} se nezdařil. {1} - Attempting to perform the InitializeDefaultDrives operation on the '{0}' provider failed. + Pokus o provedení operace InitializeDefaultDrives u poskytovatele {0} se nezdařil. - Attempting to perform the NewDrive operation on the '{0}' provider failed for the drive with root '{1}'. {2} + Pokus o provedení operace NewDrive u poskytovatele {0} pro jednotku s kořenovou cestou {1} se nezdařil. {2} - Dynamic parameters for NewDrive cannot be retrieved for the '{0}' provider. {1} + Dynamické parametry pro NewDrive nelze pro poskytovatele {0} načíst. {1} - The invocation of RemoveDrive on the '{0}' provider failed. {1} + Volání RemoveDrive u poskytovatele {0} se nezdařilo. {1} - Drive '{0}' cannot be removed because the provider '{1}' prevented it. + Jednotku {0} nelze odebrat, protože tomu poskytovatel {1} zabránil. - The path '{0}' referred to an item that was outside the base '{1}'. + Cesta {0} odkazovala na položku, která se nacházela mimo základní cestu {1}. - The invocation of Seek on the '{0}' provider's content writer failed for path '{1}'. {2} + Vyvolání operace Seek u zapisovače obsahu poskytovatele {0} pro cestu {1} se nezdařilo. {2} - The invocation of Close on the '{0}' provider's content reader or writer failed for path '{1}'. {2} + Vyvolání operace Close ve čtečce nebo zapisovači obsahu poskytovatele {0} pro cestu {1} se nezdařilo. {2} - The invocation of Read on the '{0}' provider's content reader failed for path '{1}'. {2} + Vyvolání operace Read u čtečky obsahu poskytovatele {0} pro cestu {1} se nezdařilo. {2} - The invocation of Write on the '{0}' provider's content writer failed for path '{1}'. {2} + Vyvolání operace Write u zapisovače obsahu poskytovatele {0} pro cestu {1} se nezdařilo. {2} - The provider '{0}' cannot be used to get or set data using the variable syntax. {2} + Poskytovatele {0} nelze použít k získání nebo nastavení dat pomocí syntaxe proměnné. {2} - The variable syntax cannot be used to get or set data in the provider. {2} + Syntaxi proměnné nelze použít k získání nebo nastavení dat v rámci poskytovatele. {2} - Alias is not writeable because alias {0} is read-only or constant and cannot be written to. + Do aliasu nelze zapisovat, protože alias {0} je jen pro čtení nebo je konstantní. - Cannot write to function {0} because it is read-only or constant. + Do funkce {0} nelze zapisovat, protože je jen pro čtení nebo je konstanta. - Cannot overwrite variable {0} because it is read-only or constant. + Proměnnou {0} nelze přepsat, protože je jen pro čtení nebo je konstanta. - Cannot access the variable '${0}' because it is a private variable. + K proměnné ${0} nelze získat přístup, protože je privátní. - Cannot access the command '{0}' because it is a private command. + K příkazu {0} nelze získat přístup, protože je privátní. - Cannot access the command because it is a private command. + K příkazu nelze získat přístup, protože je privátní. - Cannot access the session state resource because it is a private resource. + K prostředku stavu relace nelze získat přístup, protože se jedná o privátní prostředek. - Alias was not removed because alias {0} is constant or read-only. + Alias nebyl odebrán, protože alias {0} je konstanta nebo jen pro čtení. - Cannot remove function {0} because it is constant. + Funkci {0} nelze odebrat, protože je konstanta. - Cannot remove variable {0} because it is constant or read-only. If the variable is read-only, try the operation again specifying the Force option. + Proměnnou {0} nelze odebrat, protože je konstanta nebo jen pro čtení. Pokud je proměnná jen pro čtení, zkuste operaci provést znovu se zadanou možností Force. - Alias {0} cannot be modified because it is constant. + Alias {0} nelze upravit, protože je konstanta. - Alias {0} cannot be modified because it is read-only. + Alias {0} nelze změnit, protože je jen pro čtení. - Cannot modify function {0} because it is constant. + Funkci {0} nelze upravit, protože je konstanta. - Cannot modify function {0} because it is read-only. + Funkci {0} nelze upravit, protože je jen pro čtení. - Alias {0} cannot be made constant after it has been created. Aliases can only be made constant at creation time. + Alias {0} nelze po vytvoření změnit na konstantu. Aliasy lze nastavit jako konstanty pouze při jejich vytvoření. - Existing function {0} cannot be made constant. Functions can be made constant only at creation time. + Existující funkci {0} nelze změnit na konstantu. Funkce lze nastavit jako konstanty pouze při jejich vytvoření. - Existing variable {0} cannot be made constant. Variables can be made constant only at creation time. + Existující proměnnou {0} nelze změnit na konstantu. Proměnné lze nastavit jako konstanty pouze při jejich vytvoření. - The AllScope option cannot be removed from the alias '{0}'. + Možnost AllScope nelze z aliasu {0} odebrat. - The AllScope option cannot be removed from the function '{0}'. + Možnost AllScope nelze z funkce {0} odebrat. - The AllScope option cannot be removed from the variable '{0}'. + Možnost AllScope nelze z proměnné {0} odebrat. - The function definition '{0}' contained a scope qualifier but no function name. + Definice funkce {0} obsahovala kvalifikátor oboru, ale neobsahovala žádný název funkce. - Cannot remove provider {0}. All drives associated with provider {0} must be removed before provider {0} can be removed. + Poskytovatele {0} nelze odebrat. Před odebráním poskytovatele {0} je nutné odebrat všechny jednotky přidružené k poskytovateli {0}. - Cannot process the drive name because the drive name contains one or more of the following characters that are not valid: ; ~ / \ . : + Název jednotky nelze zpracovat, protože obsahuje jeden nebo více následujících neplatných znaků: ; ~ / \ . : - New drive creation failed because the provider does not allow the creation of the new drive. + Vytvoření nové jednotky se nezdařilo, protože poskytovatel nepovoluje vytvoření nové jednotky. - The provided value '{0}' resolved to more than one location stack. + Zadaná hodnota {0} byla přeložena na více než jeden zásobník umístění. - Cannot find location stack '{0}'. It does not exist or it is not a container. + Nelze najít zásobník umístění {0}. Neexistuje nebo není kontejnerem. - Cannot find path '{0}' because it does not exist. + Cesta {0} se nenašla, protože neexistuje. - Cannot find alias because alias '{0}' does not exist. + Alias nelze najít, protože alias {0} neexistuje. - Cannot set the location because path '{0}' resolved to multiple containers. You can only set the location to a single container at a time. + Umístění nelze nastavit, protože se cesta {0} přeložila na více kontejnerů. Umístění můžete nastavit vždy jen na jeden kontejner. - Cannot process variable because variable path '{0}' resolved to multiple items. You can get or set the variable value only one item at a time. + Proměnnou nelze zpracovat, protože cesta proměnné {0} byla přeložena na více položek. Hodnotu proměnné můžete získat nebo nastavit vždy jen pro jednu položku. - Cannot find drive. A drive with the name '{0}' does not exist. + Jednotku nelze najít. Jednotka s názvem {0} neexistuje. - Cannot find a provider with the name '{0}'. + Nelze najít poskytovatele s názvem {0}. - Cannot find a provider with the name '{0}'. The name is not in the proper format. A provider name can only be alphanumeric characters, or a PowerShell snap-in name that is followed by a single '\', followed by alphanumeric characters. + Nelze najít poskytovatele s názvem {0}. Název nemá správný formát. Název poskytovatele může obsahovat pouze alfanumerické znaky nebo může jít o název modulu snap-in PowerShellu následovaný jedním znakem zpětného lomítka (\) a poté alfanumerickými znaky. - '{0}' resolved to more than one provider name. Possible matches include:{1}. + Hodnota {0} byla přeložena na více než jeden název poskytovatele. Mezi možné shody patří:{1}. - An error occurred attempting to create an instance of the provider. The provider type name of '{0}' could not be found in the assembly. + Při pokusu o vytvoření instance poskytovatele došlo k chybě. Název typu poskytovatele {0} nebyl v sestavení nalezen. - The specified provider name '{0}' cannot be used because it contains one or more of the following characters that are not valid: \ [ ] ? * : + Zadaný název poskytovatele {0} nelze použít, protože obsahuje jeden nebo více následujících neplatných znaků: \ [ ] ? * : - An error occurred attempting to create an instance of the provider '{0}'. {1} + Při pokusu o vytvoření instance poskytovatele {0} došlo k chybě. {1} - Cannot find a variable with the name '{0}'. + Nelze najít proměnnou s názvem {0}. - Cannot find a trace source with the name '{0}'. + Nelze najít zdroj trasování s názvem {0}. - A drive with the name '{0}' already exists. + Jednotka s názvem {0} již existuje. - A variable with name '{0}' already exists. + Proměnná s názvem {0} již existuje. - The alias is not allowed, because an alias with the name '{0}' already exists. + Alias není povolen, protože alias s názvem {0} již existuje. - Cannot register the cmdlet provider because a cmdlet provider with the name '{0}' already exists. + Poskytovatele rutin nelze zaregistrovat, protože poskytovatel rutin s názvem {0} už existuje. - The path does not refer to a file system path. + Cesta neodkazuje na cestu systému souborů. - Global scope cannot be removed. + Globální obor nelze odebrat. - The scope number '{0}' exceeds the number of active scopes. + Číslo oboru {0} překračuje počet aktivních oborů. - Cannot compare PSDriveInfo. A PSDriveInfo instance can be compared only to another PSDriveInfo instance. + Nelze porovnat PSDriveInfo. Instanci PSDriveInfo lze porovnat pouze s jinou instancí PSDriveInfo. - The cmdlet provider cannot stream the results because no cmdlet was specified through which to stream the output. + Poskytovatel rutiny nemůže streamovat výsledky, protože nebyla zadána žádná rutina, prostřednictvím které by se měl streamovat výstup. - The cmdlet provider cannot stream the results because no cmdlet was specified through which to stream the error. + Poskytovatel rutiny nemůže streamovat výsledky, protože nebyla zadána žádná rutina, prostřednictvím které by se měla streamovat chyba. - Home location for this provider is not set. To set the home location, call "(get-psprovider '{0}').Home = 'path'". + Domovské umístění pro tohoto poskytovatele není nastavené. Pokud chcete nastavit domovské umístění, zavolejte "(get-psprovider '{0}').Home='path'". - The path is not in the correct format. Provider paths must contain a provider Id, followed by "::", followed by a provider specific path. + Cesta nemá správný formát. Cesty poskytovatele musí obsahovat ID poskytovatele, za ním „::“ a poté cestu specifickou pro poskytovatele. - Cannot move the item because the destination path can resolve only to a single path. + Položku nelze přesunout, protože cílovou cestu lze přeložit pouze na jednu cestu. - Cannot move the item because the source and destination paths did not resolve to the same provider. + Položku nelze přesunout, protože zdrojová a cílová cesta neodkazují na stejného poskytovatele. - Cannot move the item because the source path points to one or more items and the destination path is not a container. Validate that the destination path is a container and try again. + Položku nelze přesunout, protože zdrojová cesta odkazuje na jednu nebo více položek a cílová cesta není kontejner. Ověřte, že cílová cesta je kontejner, a zkuste to znovu. - Cannot move the item because the destination resolved to multiple paths. Specify a destination path that resolves to a single destination and try again. + Položku nelze přesunout, protože cíl se přeložil na více cest. Zadejte cílovou cestu, která se přeloží na jediný cíl, a zkuste to znovu. - Container cannot be copied onto existing leaf item. + Kontejner nelze zkopírovat do existující položky typu list. - Container cannot be copied to another container. The -Recurse or -Container parameter is not specified. + Kontejner nelze zkopírovat do jiného kontejneru. Není zadaný parametr -Recurse ani -Container. - Source and destination path did not resolve to the same provider. + Zdrojová a cílová cesta nebyly přeloženy na stejného poskytovatele. - Cannot rename item because the path resolved to multiple items. Only one item can be renamed at a time. + Položku nelze přejmenovat, protože cesta byla přeložena na více položek. Najednou lze přejmenovat pouze jednu položku. - The provider '{0}' cannot be used to resolve the path '{1}' because of an error in the provider. + Poskytovatele {0} nelze použít k překladu cesty {1} kvůli chybě v poskytovateli. - Cannot use interface. The IContentCmdletProvider interface is not implemented by this provider. + Nelze použít rozhraní. Tento poskytovatel neimplementuje rozhraní IContentCmdletProvider. - Cannot use interface. The IPropertyCmdletProvider interface is not supported by this provider. + Nelze použít rozhraní. Rozhraní IPropertyCmdletProvider není tímto poskytovatelem podporováno. - Cannot use interface. The IDynamicPropertyCmdletProvider interface is not implemented by this provider. + Nelze použít rozhraní. Tento poskytovatel neimplementuje rozhraní IDynamicPropertyCmdletProvider. - The NavigationCmdletProvider methods are not supported by this provider. + Metody NavigationCmdletProvider nejsou tímto poskytovatelem podporovány. - Provider methods not processed. The ContainerCmdletProvider methods are not supported by this provider. + Metody poskytovatele nebyly zpracovány. Metody ContainerCmdletProvider nejsou tímto poskytovatelem podporovány. - Cannot call methods. The ItemCmdletProvider methods are not supported by this provider. + Nelze volat metody. Metody ItemCmdletProvider nejsou tímto poskytovatelem podporovány. - DriveCmdletProvider methods are not supported by this provider. + Metody DriveCmdletProvider nejsou tímto poskytovatelem podporovány. - Provider operation stopped because the provider does not support this operation. + Operace poskytovatele se zastavila, protože poskytovatel tuto operaci nepodporuje. - Provider operation stopped because the provider does not support the 'Depth' parameter. + Operace poskytovatele se zastavila, protože poskytovatel nepodporuje parametr Depth. - Cannot call method. The content Seek method is not supported by this provider. + Metodu nelze zavolat. Metoda Seek obsahu není tímto poskytovatelem podporována. - Cannot perform the ClearContent operation. The ClearContent operation is not supported by this provider. + Operaci ClearContent nelze provést. Operace ClearContent není tímto poskytovatelem podporována. - The provider does not support the use of credentials. Perform the operation again without specifying credentials. + Poskytovatel nepodporuje použití přihlašovacích údajů. Proveďte operaci znovu bez zadání přihlašovacích údajů. - The FileSystem provider supports credentials only on the New-PSDrive cmdlet. Perform the operation again without specifying credentials. + Zprostředkovatel FileSystem podporuje přihlašovací údaje pouze v rutině New-PSDrive. Proveďte operaci znovu bez zadání přihlašovacích údajů. - The provider does not support transactions. Perform the operation again without the -UseTransaction parameter. + Poskytovatel nepodporuje transakce. Proveďte operaci znovu bez parametru -UseTransaction. - Cannot call method. The provider does not support the use of filters. + Metodu nelze zavolat. Poskytovatel nepodporuje použití filtrů. - Cannot create drive. The provider does not support the use of credentials. + Nelze vytvořit jednotku. Poskytovatel nepodporuje použití přihlašovacích údajů. - The item at path '{0}' already exists. + Položka v cestě {0} již existuje. - Cannot copy item. Item at the path '{0}' does not exist. + Položku nelze zkopírovat. Položka v cestě {0} neexistuje. - The item at the path '{0}' does not exist. + Položka v cestě {0} neexistuje. - Drive that contains a view of the aliases stored in a session state + Jednotka obsahující zobrazení aliasů uložených ve stavu relace - Drive that contains a view of the environment variables for the process + Jednotka obsahující zobrazení proměnných prostředí pro daný proces - Drive that contains a view of the functions stored in a session state + Jednotka obsahující zobrazení funkcí uložených ve stavu relace - Drive that contains a view of those variables stored in a session state + Jednotka obsahující zobrazení těchto proměnných uložených ve stavu relace - Drive that maps to the temporary directory path for the current user + Jednotka mapovaná na cestu k dočasnému adresáři aktuálního uživatele - Link '{0}' cannot be created because the target Value was not specified. + Odkaz {0} nelze vytvořit, protože nebyla zadána cílová hodnota. - References to the null variable always return the null value. Assignments have no effect. + Odkazy na proměnnou null vždy vracejí hodnotu null. Přiřazení nemají žádný vliv. - Maximum number of history objects to retain in a session + Maximální počet objektů historie, které se mají uchovávat v relaci - Cannot rename function because function {0} is read-only or constant. + Funkci {0} nelze přejmenovat, protože je jen pro čtení nebo je konstanta. - Cannot rename alias because alias {0} is read-only or constant. + Alias nelze přejmenovat, protože alias {0} je jen pro čtení nebo je konstanta. - Cannot rename variable because variable {0} is read-only or constant. + Proměnnou {0} nelze přejmenovat, protože je jen pro čtení nebo je konstanta. - Cannot set options on the local variable {0}. Use New-Variable to create a variable that allows options to be set. + U místní proměnné {0} nelze nastavit možnosti. Pomocí New-Variable vytvořte proměnnou, která umožňuje nastavit možnosti. - Cmdlet {0} cannot be modified because it is read-only. + Rutinu {0} nelze změnit, protože je jen pro čtení. - Cannot remove variable {0} because the variable has been optimized and is not removable. Try using the Remove-Variable cmdlet (without any aliases), or dot-sourcing the command that you are using to remove the variable. + Proměnnou {0} nelze odebrat, protože byla optimalizována a není odebratelná. Zkuste použít rutinu Remove-Variable (bez aliasů) nebo pomocí tečkové syntaxe spusťte příkaz, který používáte k odebrání proměnné. - Cannot overwrite variable {0} because the variable has been optimized. Try using the New-Variable or Set-Variable cmdlet (without any aliases), or dot-source the command that you are using to set the variable. + Proměnnou {0} nelze přepsat, protože byla optimalizována. Zkuste použít rutinu New-Variable nebo Set-Variable (bez aliasů) nebo pomocí tečkové syntaxe spusťte příkaz, který používáte k nastavení proměnné. - The parameters {0} and {1} cannot be used together. Please specify only one parameter. + Parametry {0} a {1} nelze použít společně. Zadejte prosím pouze jeden parametr. - The Tail parameter currently is supported only for the FileSystem provider. + Parametr Tail je aktuálně podporován pouze pro zprostředkovatele FileSystem. - The alias is not allowed, because a command with the name '{0}' and command type '{1}' already exists. + Alias není povolen, protože už existuje příkaz s názvem {0} a typem příkazu {1}. - Cannot run software. Permission is denied. + Nelze spustit software. Oprávnění bylo odepřeno. - '-{0}' and '-{1}' are mutually exclusive and cannot be specified at the same time. + -{0} a -{1} se vzájemně vylučují a nelze je zadat současně. - The path '{0}' is not valid. Only absolute paths are supported on remote copy operations. + Cesta {0} není platná. Pro operace vzdáleného kopírování jsou podporovány pouze absolutní cesty. - Cannot validate remote path '{0}'. + Vzdálenou cestu {0} nelze ověřit. - Cannot perform operation because the session {0} is set to {1}. + Operaci nelze provést, protože relace {0} je nastavená na {1}. - '{0}' parameter cannot be null or empty. + Parametr {0} nesmí obsahovat hodnotu null ani nesmí být prázdný. - Session State Variables + Proměnné stavu relace - Changing or creating the variable '{0}' scope to AllScope will be prevented in ConstrainedLanguage mode. + V režimu ConstrainedLanguage nebude možné změnit ani vytvořit proměnnou {0} s oborem AllScope. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/cs/VerbDescriptionStrings.cs.resx b/src/System.Management.Automation/resources/cs/VerbDescriptionStrings.cs.resx index 175483ed225..f01e601ada5 100644 --- a/src/System.Management.Automation/resources/cs/VerbDescriptionStrings.cs.resx +++ b/src/System.Management.Automation/resources/cs/VerbDescriptionStrings.cs.resx @@ -118,303 +118,303 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Adds a resource to a container, or attaches an item to another item + Přidá prostředek do kontejneru nebo připojí položku k jiné položce. - Confirms or agrees to the status of a resource or process + Potvrdí stav prostředku nebo procesu nebo s ním vyjádří souhlas. - Affirms the state of a resource + Potvrdí stav prostředku. - Stores data by replicating it + Uloží data jejich replikací. - Restricts access to a resource + Omezí přístup k prostředku. - Creates an artifact (usually a binary or document) out of some set of input files (usually source code or declarative documents) + Vytvoří artefakt (obvykle binární soubor nebo dokument) z určité sady vstupních souborů (obvykle zdrojového kódu nebo deklarativních dokumentů). - Creates a snapshot of the current state of the data or of its configuration + Vytvoří snímek aktuálního stavu dat nebo jejich konfigurace. - Removes all the resources from a container but does not delete the container + Odebere všechny prostředky z kontejneru, ale neodstraní kontejner. - Changes the state of a resource to make it inaccessible, unavailable, or unusable + Změní stav prostředku tak, aby byl nepřístupný, nedostupný nebo nepoužitelný. - Evaluates the data from one resource against the data from another resource + Vyhodnotí data z jednoho prostředku s daty z jiného prostředku. - Concludes an operation + Uzavírá operaci. - Compacts the data of a resource + Zkomprimuje data prostředku. - Acknowledges, verifies, or validates the state of a resource or process + Potvrzuje, ověřuje nebo validuje stav prostředku nebo procesu. - Creates a link between a source and a destination + Vytvoří propojení mezi zdrojem a cílem. - Changes the data from one representation to another when the cmdlet supports bidirectional conversion or when the cmdlet supports conversion between multiple data types + Mění data z jedné reprezentace na jinou, pokud rutina podporuje obousměrný převod nebo převod mezi více datovými typy. - Converts one primary type of input (the cmdlet noun indicates the input) to one or more supported output types + Převede jeden primární typ vstupu (typ vstupu označuje jmenná část názvu rutiny) na jeden nebo více podporovaných typů výstupu. - Converts from one or more types of input to a primary output type (the cmdlet noun indicates the output type) + Převede jeden nebo více typů vstupu na primární typ výstupu (typ výstupu označuje jmenná část názvu rutiny). - Copies a resource to another name or to another container + Zkopíruje prostředek pod jiný název nebo do jiného kontejneru. - Examines a resource to diagnose operational problems + Prozkoumá prostředek za účelem diagnostiky provozních problémů. - Refuses, objects, blocks, or opposes the state of a resource or process + Odmítá, vznáší námitku, blokuje nebo se staví proti stavu prostředku nebo procesu. - Sends an application, website, or solution to a remote target[s] in such a way that a consumer of that solution can access it after deployment is complete + Odešle aplikaci, web nebo řešení do vzdálených cílů tak, aby k nim uživatel řešení mohl po dokončení nasazení získat přístup. - Configures a resource to an unavailable or inactive state + Nastaví prostředek do nedostupného nebo neaktivního stavu. - Breaks the link between a source and a destination + Zruší propojení mezi zdrojem a cílem. - Detaches a named entity from a location + Odpojí pojmenovanou entitu od umístění. - Modifies existing data by adding or removing content + Upraví existující data přidáním nebo odebráním obsahu. - Configures a resource to an available or active state + Nakonfiguruje prostředek do dostupného nebo aktivního stavu. - Specifies an action that allows the user to move into a resource + Určuje akci, která uživateli umožňuje přejít do prostředku. - Sets the current environment or context to the most recently used context + Nastaví aktuální prostředí nebo kontext na naposledy použitý kontext. - Restores the data of a resource that has been compressed to its original state + Obnoví data prostředku, která byla komprimována, do původního stavu. - Encapsulates the primary input into a persistent data store, such as a file, or into an interchange format + Zapouzdřuje primární vstup do trvalého úložiště dat, jako je soubor, nebo do formátu výměny. - Looks for an object in a container that is unknown, implied, optional, or specified + Vyhledá objekt v kontejneru, který je neznámý, předpokládaný, volitelný nebo zadaný. - Arranges objects in a specified form or layout + Uspořádá objekty v zadaném formátu nebo rozložení. - Specifies an action that retrieves a resource + Určuje akci, která načte prostředek. - Allows access to a resource + Umožňuje přístup k prostředku. - Arranges or associates one or more resources + Uspořádá nebo přidruží jeden nebo více prostředků. - Makes a resource undetectable + Nastaví prostředek jako nezjistitelný. - Creates a resource from data that is stored in a persistent data store (such as a file) or in an interchange format + Vytvoří prostředek z dat uložených v trvalém úložišti dat (například v souboru) nebo ve výměnném formátu. - Prepares a resource for use, and sets it to a default state + Připraví prostředek k použití a nastaví ho do výchozího stavu. - Places a resource in a location, and optionally initializes it + Umístí prostředek do umístění a volitelně ho inicializuje. - Performs an action, such as running a command or a method + Provede akci, například spuštění příkazu nebo metody. - Combines resources into one resource + Kombinuje prostředky do jednoho prostředku. - Applies constraints to a resource + Použije omezení na prostředek. - Secures a resource + Zabezpečí prostředek. - Identifies resources that are consumed by a specified operation, or retrieves statistics about a resource + Identifikuje prostředky využívané zadanou operací nebo načte statistiky o prostředku. - Creates a single resource from multiple resources + Vytvoří jeden prostředek z více prostředků. - Attaches a named entity to a location + Připojí pojmenovanou entitu k umístění. - Moves a resource from one location to another + Přesune prostředek z jednoho umístění do jiného. - Creates a resource + Vytvoří prostředek. - Changes the state of a resource to make it accessible, available, or usable + Změní stav prostředku tak, aby byl přístupný, dostupný nebo použitelný. - Increases the effectiveness of a resource + Zvýší účinnost prostředku. - Sends data out of the environment + Odesílá data z prostředí. - Use the Test verb + Použít příkaz Test - Removes an item from the top of a stack + Odebere položku z horní části zásobníku. - Safeguards a resource from attack or loss + Chrání prostředek před útokem nebo ztrátou. - Makes a resource available to others + Zpřístupní prostředek ostatním. - Adds an item to the top of a stack + Přidá položku do horní části zásobníku. - Acquires information from a source + Získá informace ze zdroje. - Accepts information sent from a source + Přijímá informace odeslané ze zdroje. - Resets a resource to the state that was undone + Obnoví prostředek do stavu, který byl vrácen zpět. - Creates an entry for a resource in a repository such as a database + Vytvoří položku pro prostředek v úložišti, například v databázi. - Deletes a resource from a container + Odstraní prostředek z kontejneru. - Changes the name of a resource + Změní název prostředku. - Restores a resource to a usable condition + Obnoví prostředek do použitelného stavu. - Asks for a resource or asks for permissions + Vyžádá si prostředek nebo oprávnění. - Sets a resource back to its original state + Vrátí prostředek do původního stavu. - Changes the size of a resource + Změní velikost prostředku. - Maps a shorthand representation of a resource to a more complete representation + Mapuje zkrácenou reprezentaci prostředku na úplnější reprezentaci. - Stops an operation and then starts it again + Zastaví operaci a potom ji znovu spustí. - Sets a resource to a predefined state, such as a state set by Checkpoint + Nastaví prostředek do předdefinovaného stavu, například do stavu nastaveného kontrolním bodem. - Starts an operation that has been suspended + Spustí pozastavenou operaci. - Specifies an action that does not allow access to a resource + Určuje akci, která neumožňuje přístup k prostředku. - Preserves data to avoid loss + Zachová data, aby nedošlo ke ztrátě. - Creates a reference to a resource in a container + Vytvoří odkaz na prostředek v kontejneru. - Locates a resource in a container + Vyhledá prostředek v kontejneru. - Delivers information to a destination + Doručuje informace do cíle. - Replaces data on an existing resource or creates a resource that contains some data + Nahradí data v existujícím prostředku nebo vytvoří prostředek obsahující data. - Makes a resource visible to the user + Zviditelní prostředek pro uživatele. - Assures that two or more resources are in the same state + Zajistí, aby dva nebo více prostředků byly ve stejném stavu. - Bypasses one or more resources or points in a sequence + Přeskočí jeden nebo více prostředků nebo bodů v posloupnosti. - Separates parts of a resource + Odděluje části prostředku. - Initiates an operation + Iniciuje operaci. - Moves to the next point or resource in a sequence + Přejde k dalšímu bodu nebo prostředku v posloupnosti. - Discontinues an activity + Ukončí aktivitu. - Presents a resource for approval + Uvede prostředek ke schválení. - Pauses an activity + Pozastaví aktivitu. - Specifies an action that alternates between two resources, such as to change between two locations, responsibilities, or states + Určuje akci, která střídá dva prostředky, například při přepínání mezi dvěma umístěními, odpovědnostmi nebo stavy. - Verifies the operation or consistency of a resource + Ověří operaci nebo konzistenci prostředku. - Tracks the activities of a resource + Sleduje aktivity prostředku. - Removes restrictions to a resource + Odebere omezení prostředku. - Sets a resource to its previous state + Nastaví prostředek na předchozí stav. - Removes a resource from an indicated location + Odebere prostředek z uvedeného umístění. - Releases a resource that was locked + Uvolní prostředek, který byl uzamčen. - Removes safeguards from a resource that were added to prevent it from attack or loss + Odebere z prostředku ochrany, které byly přidány za účelem ochrany před útokem nebo ztrátou. - Makes a resource unavailable to others + Znepřístupní prostředek ostatním. - Removes the entry for a resource from a repository + Odebere položku prostředku z úložiště. - Brings a resource up-to-date to maintain its state, accuracy, conformance, or compliance + Aktualizuje prostředek, aby se zachoval jeho stav, přesnost, shoda nebo dodržování předpisů. - Uses or includes a resource to do something + Použije nebo zahrne prostředek k provedení určité akce. - Pauses an operation until a specified event occurs + Pozastaví operaci, dokud nedojde k zadané události. - Continually inspects or monitors a resource for changes + Průběžně kontroluje nebo monitoruje změny prostředku. - Adds information to a target + Přidá informace do cíle. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/de/SessionStateProviderBaseStrings.de.resx b/src/System.Management.Automation/resources/de/SessionStateProviderBaseStrings.de.resx index f42f935cec9..dffab2a7aeb 100644 --- a/src/System.Management.Automation/resources/de/SessionStateProviderBaseStrings.de.resx +++ b/src/System.Management.Automation/resources/de/SessionStateProviderBaseStrings.de.resx @@ -118,39 +118,39 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Set Item + Element festlegen - Item: {0} Value: {1} + Element: {0} Wert: {1} - Clear Item + Element löschen - Item: {0} + Element: {0} - Remove Item + Element entfernen - Item: {0} + Element: {0} - New Item + Neues Element - Item: {0} Type: {1} Value: {2} + Element: {0} Typ: {1} Wert: {2} - Copy Item + Element kopieren - Item: {0} Destination: {1} + Element: {0} Ziel: {1} - Rename Item + Element umbenennen - Item: {0} NewName: {1} + Element: {0} NewName: {1} \ No newline at end of file diff --git a/src/System.Management.Automation/resources/de/SubsystemStrings.de.resx b/src/System.Management.Automation/resources/de/SubsystemStrings.de.resx index 6fbbda319de..5c323e1c4b2 100644 --- a/src/System.Management.Automation/resources/de/SubsystemStrings.de.resx +++ b/src/System.Management.Automation/resources/de/SubsystemStrings.de.resx @@ -118,42 +118,42 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The subsystem '{0}' does not allow more than one implementation to be registered. + Das Subsystem „{0}“ erlaubt nicht mehr als eine registrierte Implementierung. - The implementation with Id '{0}' was already registered for the subsystem '{1}'. + Die Implementierung mit der ID „{0}“ war bereits für das Subsystem „{1}“ registriert. - The subsystem '{0}' does not allow the unregistration of an implementation. + Das Subsystem „{0}“ erlaubt das Aufheben der Registrierung einer Implementierung nicht. - No implementation was registered for the subsystem '{0}'. + Für das Subsystem „{0}“ wurde keine Implementierung registriert. - A registered implementation with the Id '{0}' was not found. + Eine registrierte Implementierung mit der ID „{0}“ wurde nicht gefunden. - The specified subsystem type '{0}' is unknown. + Der angegebene Subsystemtyp „{0}“ ist unbekannt. - You must specify a concrete subsystem type instead of the base interface 'ISubsystem'. + Sie müssen einen konkreten Subsystemtyp anstelle der Basisschnittstelle „ISubsystem“ angeben. - The specified subsystem kind '{0}' is unknown. + Die angegebene Subsystemart „{0}“ ist unbekannt. - For the target subsystem kind '{0}', the specified subsystem instance needs to implement the corresponding concrete interface or abstract class '{1}'. + Für den Zielsubsystemtyp „{0}“ muss die angegebene Subsysteminstanz die entsprechende konkrete Schnittstelle oder abstrakte Klasse „{1}“ implementieren. - The declared metadata for subsystem kind '{0}' is invalid. A subsystem that requires cmdlets or functions to be defined cannot allow multiple registrations because that would result in one implementation overwriting the commands defined by another implementation. + Die deklarierten Metadaten für die Subsystemart „{0}“ sind ungültig. Ein Subsystem, für das Cmdlets oder Funktionen definiert sein müssen, kann mehrere Registrierungen nicht zulassen, da sonst eine Implementierung die von einer anderen Implementierung definierten Befehle überschreiben würde. - The 'Id' property of an implementation for the subsystem '{0}' cannot be an empty GUID. + Die Eigenschaft „Id“ einer Implementierung für das Subsystem „{0}“ darf keine leere GUID sein. - The 'Name' property of an implementation for the subsystem '{0}' cannot be null or an empty string. + Die Eigenschaft „Name“ einer Implementierung für das Subsystem „{0}“ darf nicht NULL oder eine leere Zeichenfolge sein. - The 'Description' property of an implementation for the subsystem '{0}' cannot be null or an empty string. + Die Eigenschaft „Description“ einer Implementierung für das Subsystem „{0}“ darf nicht NULL oder eine leere Zeichenfolge sein. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/es/SessionStateProviderBaseStrings.es.resx b/src/System.Management.Automation/resources/es/SessionStateProviderBaseStrings.es.resx index f42f935cec9..e4f19d1a6ce 100644 --- a/src/System.Management.Automation/resources/es/SessionStateProviderBaseStrings.es.resx +++ b/src/System.Management.Automation/resources/es/SessionStateProviderBaseStrings.es.resx @@ -118,39 +118,39 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Set Item + Establecer elemento - Item: {0} Value: {1} + Elemento: {0} Valor: {1} - Clear Item + Borrar elemento - Item: {0} + Elemento: {0} - Remove Item + Eliminar elemento - Item: {0} + Elemento: {0} - New Item + Nuevo elemento - Item: {0} Type: {1} Value: {2} + Elemento: {0} Tipo: {1} Valor: {2} - Copy Item + Copiar elemento - Item: {0} Destination: {1} + Elemento: {0} Destino: {1} - Rename Item + Cambiar nombre de elemento - Item: {0} NewName: {1} + Elemento: {0} NewName: {1} \ No newline at end of file diff --git a/src/System.Management.Automation/resources/es/SubsystemStrings.es.resx b/src/System.Management.Automation/resources/es/SubsystemStrings.es.resx index 6fbbda319de..2c2698e5838 100644 --- a/src/System.Management.Automation/resources/es/SubsystemStrings.es.resx +++ b/src/System.Management.Automation/resources/es/SubsystemStrings.es.resx @@ -118,42 +118,42 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The subsystem '{0}' does not allow more than one implementation to be registered. + El subsistema "{0}" no permite registrar más de una implementación. - The implementation with Id '{0}' was already registered for the subsystem '{1}'. + La implementación con Id "{0}" ya estaba registrada para el subsistema "{1}". - The subsystem '{0}' does not allow the unregistration of an implementation. + El subsistema "{0}" no permite anular el registro de una implementación. - No implementation was registered for the subsystem '{0}'. + No se registró ninguna implementación para el subsistema "{0}". - A registered implementation with the Id '{0}' was not found. + No se encontró ninguna implementación registrada con el Id "{0}". - The specified subsystem type '{0}' is unknown. + El tipo de subsistema especificado "{0}" es desconocido. - You must specify a concrete subsystem type instead of the base interface 'ISubsystem'. + Debe especificar un tipo de subsistema concreto en lugar de la interfaz base "ISubsystem". - The specified subsystem kind '{0}' is unknown. + El tipo de subsistema especificado "{0}" es desconocido. - For the target subsystem kind '{0}', the specified subsystem instance needs to implement the corresponding concrete interface or abstract class '{1}'. + Para el tipo de subsistema de destino ''{0}", la instancia de subsistema especificada debe implementar la interfaz concreta correspondiente o la clase abstracta "{1}". - The declared metadata for subsystem kind '{0}' is invalid. A subsystem that requires cmdlets or functions to be defined cannot allow multiple registrations because that would result in one implementation overwriting the commands defined by another implementation. + Los metadatos declarados para el tipo de subsistema "{0}" no son válidos. Un subsistema que requiere que se definan cmdlets o funciones no puede permitir varios registros porque esto daría lugar a que una implementación sobrescribiera los comandos definidos por otra implementación. - The 'Id' property of an implementation for the subsystem '{0}' cannot be an empty GUID. + La propiedad "Id" de una implementación para el subsistema "{0}" no puede ser un GUID vacío. - The 'Name' property of an implementation for the subsystem '{0}' cannot be null or an empty string. + La propiedad "Name" de una implementación para el subsistema "{0}" no puede ser null ni una cadena vacía. - The 'Description' property of an implementation for the subsystem '{0}' cannot be null or an empty string. + La propiedad "Description" de una implementación para el subsistema "{0}" no puede ser null ni una cadena vacía. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/es/VerbDescriptionStrings.es.resx b/src/System.Management.Automation/resources/es/VerbDescriptionStrings.es.resx index 175483ed225..85c793b21c1 100644 --- a/src/System.Management.Automation/resources/es/VerbDescriptionStrings.es.resx +++ b/src/System.Management.Automation/resources/es/VerbDescriptionStrings.es.resx @@ -118,303 +118,303 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Adds a resource to a container, or attaches an item to another item + Agrega un recurso a un contenedor o adjunta un elemento a otro - Confirms or agrees to the status of a resource or process + Confirma o acepta el estado de un recurso o proceso - Affirms the state of a resource + Confirma el estado de un recurso - Stores data by replicating it + Almacena datos mediante su replicación - Restricts access to a resource + Restringe el acceso a un recurso - Creates an artifact (usually a binary or document) out of some set of input files (usually source code or declarative documents) + Crea un artefacto (normalmente un archivo binario o un documento) de algún conjunto de archivos de entrada (normalmente código fuente o documentos declarativos) - Creates a snapshot of the current state of the data or of its configuration + Crea una instantánea del estado actual de los datos o de su configuración - Removes all the resources from a container but does not delete the container + Quita todos los recursos de un contenedor, pero no elimina el contenedor - Changes the state of a resource to make it inaccessible, unavailable, or unusable + Cambia el estado de un recurso para que sea inaccesible, no disponible o inutilizable - Evaluates the data from one resource against the data from another resource + Evalúa los datos de un recurso frente a los datos de otro recurso - Concludes an operation + Concluye una operación - Compacts the data of a resource + Compacta los datos de un recurso - Acknowledges, verifies, or validates the state of a resource or process + Reconoce, comprueba o valida el estado de un recurso o proceso - Creates a link between a source and a destination + Crea un vínculo entre un origen y un destino - Changes the data from one representation to another when the cmdlet supports bidirectional conversion or when the cmdlet supports conversion between multiple data types + Cambia los datos de una representación a otra cuando el cmdlet admite la conversión bidireccional o cuando el cmdlet admite la conversión entre varios tipos de datos - Converts one primary type of input (the cmdlet noun indicates the input) to one or more supported output types + Convierte un tipo principal de entrada (el nombre del cmdlet indica la entrada) en uno o varios tipos de salida admitidos - Converts from one or more types of input to a primary output type (the cmdlet noun indicates the output type) + Convierte uno o más tipos de entrada en un tipo de salida principal (el nombre del cmdlet indica el tipo de salida) - Copies a resource to another name or to another container + Copia un recurso en otro nombre o en otro contenedor - Examines a resource to diagnose operational problems + Examina un recurso para diagnosticar problemas operativos - Refuses, objects, blocks, or opposes the state of a resource or process + Rechaza, objeta, bloquea u opone el estado de un recurso o proceso - Sends an application, website, or solution to a remote target[s] in such a way that a consumer of that solution can access it after deployment is complete + Envía una aplicación, un sitio web o una solución a uno o varios destinos remotos de forma que un consumidor de esa solución pueda acceder a ella una vez completada la implementación - Configures a resource to an unavailable or inactive state + Configura un recurso en un estado no disponible o inactivo - Breaks the link between a source and a destination + Rompe el vínculo entre un origen y un destino - Detaches a named entity from a location + Desasocia una entidad con nombre de una ubicación - Modifies existing data by adding or removing content + Modifica los datos existentes agregando o quitando contenido - Configures a resource to an available or active state + Configura un recurso en un estado disponible o activo - Specifies an action that allows the user to move into a resource + Especifica una acción que permite al usuario moverse a un recurso - Sets the current environment or context to the most recently used context + Establece el entorno o contexto actual en el contexto usado más recientemente - Restores the data of a resource that has been compressed to its original state + Restaura los datos de un recurso comprimido a su estado original - Encapsulates the primary input into a persistent data store, such as a file, or into an interchange format + Encapsula la entrada principal en un almacén de datos persistente, como un archivo, o en un formato de intercambio - Looks for an object in a container that is unknown, implied, optional, or specified + Busca un objeto en un contenedor desconocido, implícito, opcional o especificado - Arranges objects in a specified form or layout + Organiza objetos en una disposición o formato especificado - Specifies an action that retrieves a resource + Especifica una acción que recupera un recurso - Allows access to a resource + Permite el acceso a un recurso - Arranges or associates one or more resources + Organiza o asocia uno o varios recursos - Makes a resource undetectable + Hace que un recurso sea indetectable - Creates a resource from data that is stored in a persistent data store (such as a file) or in an interchange format + Crea un recurso a partir de datos almacenados en un almacén de datos persistente, como un archivo, o en un formato de intercambio - Prepares a resource for use, and sets it to a default state + Prepara un recurso para su uso y lo establece en un estado predeterminado - Places a resource in a location, and optionally initializes it + Coloca un recurso en una ubicación y, opcionalmente, lo inicializa - Performs an action, such as running a command or a method + Realiza una acción, como ejecutar un comando o un método - Combines resources into one resource + Combina recursos en un solo recurso - Applies constraints to a resource + Aplica restricciones a un recurso - Secures a resource + Protege un recurso - Identifies resources that are consumed by a specified operation, or retrieves statistics about a resource + Identifica los recursos que consume una operación especificada o recupera estadísticas sobre un recurso - Creates a single resource from multiple resources + Crea un único recurso a partir de varios recursos - Attaches a named entity to a location + Adjunta una entidad con nombre a una ubicación - Moves a resource from one location to another + Mueve un recurso de una ubicación a otra - Creates a resource + Crea un recurso - Changes the state of a resource to make it accessible, available, or usable + Cambia el estado de un recurso para hacerlo accesible, disponible o utilizable - Increases the effectiveness of a resource + Aumenta la eficacia de un recurso - Sends data out of the environment + Envía datos fuera del entorno - Use the Test verb + Usar el verbo de prueba - Removes an item from the top of a stack + Quita un elemento de la parte superior de una pila - Safeguards a resource from attack or loss + Protege un recurso frente a ataques o pérdidas - Makes a resource available to others + Pone un recurso a disposición de otros usuarios - Adds an item to the top of a stack + Agrega un elemento a la parte superior de una pila - Acquires information from a source + Adquiere información de un origen - Accepts information sent from a source + Acepta la información enviada desde un origen - Resets a resource to the state that was undone + Restablece un recurso al estado que se deshace - Creates an entry for a resource in a repository such as a database + Crea una entrada para un recurso en un repositorio, como una base de datos - Deletes a resource from a container + Elimina un recurso de un contenedor - Changes the name of a resource + Cambia el nombre de un recurso - Restores a resource to a usable condition + Restaura un recurso a una condición utilizable - Asks for a resource or asks for permissions + Solicita un recurso o solicita permisos - Sets a resource back to its original state + Vuelve a establecer un recurso en su estado original - Changes the size of a resource + Cambia el tamaño de un recurso - Maps a shorthand representation of a resource to a more complete representation + Asigna una representación abreviada de un recurso a una representación más completa - Stops an operation and then starts it again + Detiene una operación y, a continuación, la vuelve a iniciar - Sets a resource to a predefined state, such as a state set by Checkpoint + Establece un recurso en un estado predefinido, como un estado establecido por Checkpoint - Starts an operation that has been suspended + Inicia una operación que se ha suspendido - Specifies an action that does not allow access to a resource + Especifica una acción que no permite el acceso a un recurso - Preserves data to avoid loss + Conserva los datos para evitar la pérdida - Creates a reference to a resource in a container + Crea una referencia a un recurso en un contenedor - Locates a resource in a container + Busca un recurso en un contenedor - Delivers information to a destination + Entrega información a un destino - Replaces data on an existing resource or creates a resource that contains some data + Reemplaza datos en un recurso existente o crea un recurso que contiene algunos datos - Makes a resource visible to the user + Hace visible un recurso para el usuario - Assures that two or more resources are in the same state + Garantiza que dos o más recursos están en el mismo estado - Bypasses one or more resources or points in a sequence + Omite uno o varios recursos o puntos en una secuencia - Separates parts of a resource + Separa las partes de un recurso - Initiates an operation + Inicia una operación - Moves to the next point or resource in a sequence + Se mueve al siguiente punto o recurso de una secuencia - Discontinues an activity + Interrumpe una actividad - Presents a resource for approval + Presenta un recurso para su aprobación - Pauses an activity + Pausa una actividad - Specifies an action that alternates between two resources, such as to change between two locations, responsibilities, or states + Especifica una acción que alterna entre dos recursos, como cambiar entre dos ubicaciones, responsabilidades o estados - Verifies the operation or consistency of a resource + Comprueba la operación o coherencia de un recurso - Tracks the activities of a resource + Realiza un seguimiento de las actividades de un recurso - Removes restrictions to a resource + Elimina las restricciones de un recurso - Sets a resource to its previous state + Establece un recurso en su estado anterior - Removes a resource from an indicated location + Elimina un recurso de una ubicación indicada - Releases a resource that was locked + Libera un recurso que se bloqueó - Removes safeguards from a resource that were added to prevent it from attack or loss + Quita las medidas de seguridad de un recurso que se agregaron para evitar que se produzcan ataques o pérdidas - Makes a resource unavailable to others + Hace que un recurso no esté disponible para otros - Removes the entry for a resource from a repository + Quita la entrada de un recurso de un repositorio - Brings a resource up-to-date to maintain its state, accuracy, conformance, or compliance + Pone un recurso al día para mantener su estado, precisión, conformidad o cumplimiento - Uses or includes a resource to do something + Usa o incluye un recurso para hacer algo - Pauses an operation until a specified event occurs + Pausa una operación hasta que se produce un evento especificado - Continually inspects or monitors a resource for changes + Inspecciona o supervisa continuamente un recurso en busca de cambios - Adds information to a target + Agrega información a un destino \ No newline at end of file diff --git a/src/System.Management.Automation/resources/fr/SubsystemStrings.fr.resx b/src/System.Management.Automation/resources/fr/SubsystemStrings.fr.resx index 6fbbda319de..dcd44dc9d19 100644 --- a/src/System.Management.Automation/resources/fr/SubsystemStrings.fr.resx +++ b/src/System.Management.Automation/resources/fr/SubsystemStrings.fr.resx @@ -118,42 +118,42 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The subsystem '{0}' does not allow more than one implementation to be registered. + Le sous-système « {0} » n’autorise pas l’inscription de plusieurs implémentations. - The implementation with Id '{0}' was already registered for the subsystem '{1}'. + L’implémentation avec l’ID « {0} » était déjà inscrite pour le sous-système « {1} ». - The subsystem '{0}' does not allow the unregistration of an implementation. + Le sous-système « {0} » n’autorise pas la désinscription d’une implémentation. - No implementation was registered for the subsystem '{0}'. + Aucune implémentation n’a été inscrite pour le sous-système « {0} ». - A registered implementation with the Id '{0}' was not found. + Aucune implémentation enregistrée avec l’ID « {0} » n’a été trouvée. - The specified subsystem type '{0}' is unknown. + Le type de sous-système spécifié « {0} » est inconnu. - You must specify a concrete subsystem type instead of the base interface 'ISubsystem'. + Vous devez spécifier un type de sous-système concret au lieu de l’interface de base « ISubsystem ». - The specified subsystem kind '{0}' is unknown. + Le genre de sous-système spécifié « {0} » est inconnu. - For the target subsystem kind '{0}', the specified subsystem instance needs to implement the corresponding concrete interface or abstract class '{1}'. + Pour le type de sous-système cible « {0} », l’instance de sous-système spécifiée doit implémenter l’interface concrète ou la classe abstraite correspondante « {1} ». - The declared metadata for subsystem kind '{0}' is invalid. A subsystem that requires cmdlets or functions to be defined cannot allow multiple registrations because that would result in one implementation overwriting the commands defined by another implementation. + Les métadonnées déclarées pour le type de sous-système « {0}» ne sont pas valides. Un sous-système qui requiert la définition de cmdlets ou de fonctions ne peut pas autoriser plusieurs inscriptions, car cela entraînerait le remplacement par une implémentation des commandes définies par une autre implémentation. - The 'Id' property of an implementation for the subsystem '{0}' cannot be an empty GUID. + La propriété « Id » d’une implémentation du sous-système « {0} » ne peut pas être un GUID vide. - The 'Name' property of an implementation for the subsystem '{0}' cannot be null or an empty string. + La propriété « Nom » d’une implémentation pour le sous-système « {0} » ne peut pas avoir une valeur nulle ni être une chaîne vide. - The 'Description' property of an implementation for the subsystem '{0}' cannot be null or an empty string. + La propriété « Description » d’une implémentation pour le sous-système « {0} » ne peut pas avoir une valeur nulle ni être une chaîne vide. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/it/SubsystemStrings.it.resx b/src/System.Management.Automation/resources/it/SubsystemStrings.it.resx index 6fbbda319de..93a0871e78c 100644 --- a/src/System.Management.Automation/resources/it/SubsystemStrings.it.resx +++ b/src/System.Management.Automation/resources/it/SubsystemStrings.it.resx @@ -118,42 +118,42 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The subsystem '{0}' does not allow more than one implementation to be registered. + Il sottosistema ''{0}' 'non consente la registrazione di più implementazioni. - The implementation with Id '{0}' was already registered for the subsystem '{1}'. + L'implementazione con ID ''{0}'' era già stata registrata per il sottosistema ''{1}''. - The subsystem '{0}' does not allow the unregistration of an implementation. + Il sottosistema ''{0}' 'non consente l'annullamento della registrazione di un'implementazione. - No implementation was registered for the subsystem '{0}'. + Non è stata registrata alcuna implementazione per il sottosistema ''{0}''. - A registered implementation with the Id '{0}' was not found. + Non è possibile trovare un'implementazione registrata con ID ''{0}''. - The specified subsystem type '{0}' is unknown. + Il tipo di sottosistema specificato ''{0}' è sconosciuto. - You must specify a concrete subsystem type instead of the base interface 'ISubsystem'. + È necessario specificare un tipo di sottosistema concreto anziché l'interfaccia di base 'ISubsystem'. - The specified subsystem kind '{0}' is unknown. + Il tipo di sottosistema specificato ''{0}'' è sconosciuto. - For the target subsystem kind '{0}', the specified subsystem instance needs to implement the corresponding concrete interface or abstract class '{1}'. + Per il tipo di sottosistema di destinazione ''{0}'', l'istanza del sottosistema specificata deve implementare l'interfaccia concreta corrispondente o la classe astratta ''{1}''. - The declared metadata for subsystem kind '{0}' is invalid. A subsystem that requires cmdlets or functions to be defined cannot allow multiple registrations because that would result in one implementation overwriting the commands defined by another implementation. + I metadati dichiarati per il tipo di sottosistema ''{0}'' non sono validi. Un sottosistema che richiede la definizione di cmdlet o funzioni non può consentire più registrazioni perché ciò comporterebbe la sovrascrittura di un'implementazione dei comandi definiti da un'altra implementazione. - The 'Id' property of an implementation for the subsystem '{0}' cannot be an empty GUID. + La proprietà ''Id' 'di un'implementazione per il sottosistema ''{0}'' non può essere un GUID vuoto. - The 'Name' property of an implementation for the subsystem '{0}' cannot be null or an empty string. + La proprietà ''Name'' di un'implementazione per il sottosistema ''{0}'' non può essere Null o una stringa vuota. - The 'Description' property of an implementation for the subsystem '{0}' cannot be null or an empty string. + La proprietà ''Description'' di un'implementazione per il sottosistema ''{0}'' non può essere Null o una stringa vuota. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/ja/SessionStateProviderBaseStrings.ja.resx b/src/System.Management.Automation/resources/ja/SessionStateProviderBaseStrings.ja.resx index f42f935cec9..2eab8d0066b 100644 --- a/src/System.Management.Automation/resources/ja/SessionStateProviderBaseStrings.ja.resx +++ b/src/System.Management.Automation/resources/ja/SessionStateProviderBaseStrings.ja.resx @@ -118,39 +118,39 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Set Item + 項目の設定 - Item: {0} Value: {1} + 項目: {0} 値: {1} - Clear Item + 項目のクリア - Item: {0} + 項目: {0} - Remove Item + 項目の削除 - Item: {0} + 項目: {0} - New Item + 新しい項目 - Item: {0} Type: {1} Value: {2} + 項目: {0} 型: {1} 値: {2} - Copy Item + 項目のコピー - Item: {0} Destination: {1} + 項目: {0} 宛先: {1} - Rename Item + 項目名の変更 - Item: {0} NewName: {1} + 項目: {0} NewName: {1} \ No newline at end of file diff --git a/src/System.Management.Automation/resources/ja/SubsystemStrings.ja.resx b/src/System.Management.Automation/resources/ja/SubsystemStrings.ja.resx index 6fbbda319de..35bf528a231 100644 --- a/src/System.Management.Automation/resources/ja/SubsystemStrings.ja.resx +++ b/src/System.Management.Automation/resources/ja/SubsystemStrings.ja.resx @@ -118,42 +118,42 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The subsystem '{0}' does not allow more than one implementation to be registered. + サブシステム '{0}' では、複数の実装を登録できません。 - The implementation with Id '{0}' was already registered for the subsystem '{1}'. + ID '{0}' の実装は、サブシステム '{1}' に既に登録されています。 - The subsystem '{0}' does not allow the unregistration of an implementation. + サブシステム '{0}' では、実装の登録解除は許可されていません。 - No implementation was registered for the subsystem '{0}'. + サブシステム '{0}' の実装が登録されていません。 - A registered implementation with the Id '{0}' was not found. + ID '{0}' の登録済み実装が見つかりませんでした。 - The specified subsystem type '{0}' is unknown. + 指定されたサブシステムの種類 '{0}' は不明です。 - You must specify a concrete subsystem type instead of the base interface 'ISubsystem'. + 基本インターフェイス 'ISubsystem' ではなく、具象サブシステムの種類を指定する必要があります。 - The specified subsystem kind '{0}' is unknown. + 指定されたサブシステムの種類 '{0}' は不明です。 - For the target subsystem kind '{0}', the specified subsystem instance needs to implement the corresponding concrete interface or abstract class '{1}'. + ターゲット サブシステムの種類 '{0}' の場合、指定されたサブシステム インスタンスは、対応する具象インターフェイスまたは抽象クラス '{1}' を実装する必要があります。 - The declared metadata for subsystem kind '{0}' is invalid. A subsystem that requires cmdlets or functions to be defined cannot allow multiple registrations because that would result in one implementation overwriting the commands defined by another implementation. + サブシステムの種類 '{0}' の宣言されたメタデータが無効です。コマンドレットまたは関数を定義する必要があるサブシステムでは、複数の登録を許可できません。これにより、1 つの実装で別の実装によって定義されたコマンドが上書きされるためです。 - The 'Id' property of an implementation for the subsystem '{0}' cannot be an empty GUID. + サブシステム '{0}' の実装の ”Id” プロパティを空の GUID にすることはできません。 - The 'Name' property of an implementation for the subsystem '{0}' cannot be null or an empty string. + サブシステム '{0}' の実装の ”Name” プロパティを null 値または空の文字列にすることはできません。 - The 'Description' property of an implementation for the subsystem '{0}' cannot be null or an empty string. + サブシステム '{0}' の実装の ”Description” プロパティを null 値または空の文字列にすることはできません。 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/ja/VerbDescriptionStrings.ja.resx b/src/System.Management.Automation/resources/ja/VerbDescriptionStrings.ja.resx index 175483ed225..0d58c078fd6 100644 --- a/src/System.Management.Automation/resources/ja/VerbDescriptionStrings.ja.resx +++ b/src/System.Management.Automation/resources/ja/VerbDescriptionStrings.ja.resx @@ -118,303 +118,303 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Adds a resource to a container, or attaches an item to another item + コンテナーにリソースを追加するか、項目を別の項目にアタッチします - Confirms or agrees to the status of a resource or process + リソースまたはプロセスの状態を確認するか、それに同意します - Affirms the state of a resource + リソースの状態を表明します - Stores data by replicating it + データをレプリケートして格納します - Restricts access to a resource + リソースへのアクセスを制限します - Creates an artifact (usually a binary or document) out of some set of input files (usually source code or declarative documents) + 何らかの入力ファイル セット (通常はソース コードまたは宣言ドキュメント) から成果物 (通常はバイナリまたはドキュメント) を作成します - Creates a snapshot of the current state of the data or of its configuration + データまたはその構成の現在の状態のスナップショットを作成します - Removes all the resources from a container but does not delete the container + コンテナーからオブジェクトをすべて削除しますが、コンテナーは削除しません - Changes the state of a resource to make it inaccessible, unavailable, or unusable + リソースの状態を変更して、アクセス不可、利用不可、または使用不可にします - Evaluates the data from one resource against the data from another resource + あるリソースのデータを、別のリソースのデータと比較して評価します - Concludes an operation + 操作を終了します - Compacts the data of a resource + リソースのデータを圧縮します - Acknowledges, verifies, or validates the state of a resource or process + リソースまたはプロセスの状態を承認、検証、または確認します - Creates a link between a source and a destination + ソースと宛先の間にリンクを作成します - Changes the data from one representation to another when the cmdlet supports bidirectional conversion or when the cmdlet supports conversion between multiple data types + コマンドレットが双方向変換をサポートしている場合、またはコマンドレットが複数のデータ型間の変換をサポートする場合に、データをある表現から別の表現に変更します - Converts one primary type of input (the cmdlet noun indicates the input) to one or more supported output types + 1 種類のプライマリ入力 (コマンドレットの名詞が入力を示します) を、1 つ以上のサポートされている出力の種類に変換します - Converts from one or more types of input to a primary output type (the cmdlet noun indicates the output type) + 1 つ以上の種類の入力からプライマリ出力型に変換します (コマンドレットの名詞は出力の種類を示します) - Copies a resource to another name or to another container + リソースを別の名前または別のコンテナーにコピーします - Examines a resource to diagnose operational problems + リソースを調べて運用上の問題を診断します - Refuses, objects, blocks, or opposes the state of a resource or process + リソースまたはプロセスの状態を拒否、反対、ブロック、または禁止します - Sends an application, website, or solution to a remote target[s] in such a way that a consumer of that solution can access it after deployment is complete + アプリケーション、Web サイト、またはソリューションをリモート ターゲットに送信して、そのソリューションのコンシューマーが展開の完了後にアクセスできるようにします - Configures a resource to an unavailable or inactive state + リソースを使用できない状態または非アクティブな状態に構成します - Breaks the link between a source and a destination + ソースと宛先の間のリンクを解除します - Detaches a named entity from a location + 名前付きエンティティを場所からデタッチします - Modifies existing data by adding or removing content + コンテンツを追加または削除して既存のデータを変更します - Configures a resource to an available or active state + 使用可能な状態またはアクティブな状態にリソースを構成します - Specifies an action that allows the user to move into a resource + ユーザーにリソース内への移動を許可するアクションを指定します - Sets the current environment or context to the most recently used context + 現在の環境またはコンテキストを最近使用したコンテキストに設定します - Restores the data of a resource that has been compressed to its original state + 圧縮されたリソースのデータを元の状態に復元します - Encapsulates the primary input into a persistent data store, such as a file, or into an interchange format + プライマリ入力をファイルなどの永続的なデータ ストアにカプセル化するか、インターチェンジ形式にカプセル化します - Looks for an object in a container that is unknown, implied, optional, or specified + 不明、暗黙、オプション、または指定のコンテナー内のオブジェクトを検索します - Arranges objects in a specified form or layout + 指定したフォームまたはレイアウトでオブジェクトを配置します - Specifies an action that retrieves a resource + リソースを取得するアクションを指定します - Allows access to a resource + リソースへのアクセスを許可します - Arranges or associates one or more resources + 1 つ以上のリソースを配置するか関連付けます - Makes a resource undetectable + リソースを検出できないようにします - Creates a resource from data that is stored in a persistent data store (such as a file) or in an interchange format + 永続的なデータ ストア (ファイルなど) またはインターチェンジ形式で格納されているデータからリソースを作成します - Prepares a resource for use, and sets it to a default state + 使用するリソースを準備し、既定の状態に設定します - Places a resource in a location, and optionally initializes it + リソースを場所に配置し、必要に応じて初期設定します - Performs an action, such as running a command or a method + コマンドやメソッドの実行などのアクションを実行します - Combines resources into one resource + リソースを 1 つのリソースに結合します - Applies constraints to a resource + リソースに制約を適用します - Secures a resource + リソースをセキュリティで保護します - Identifies resources that are consumed by a specified operation, or retrieves statistics about a resource + 指定された操作によって使用されたリソースを識別するか、リソースに関する統計情報を取得します - Creates a single resource from multiple resources + 複数のリソースから 1 つのリソースを作成します - Attaches a named entity to a location + 名前付きエンティティを場所にアタッチします - Moves a resource from one location to another + ある場所から別の場所にリソースを移動します - Creates a resource + リソースを作成します - Changes the state of a resource to make it accessible, available, or usable + リソースの状態を変更して、アクセス可能、使用可能、または使用可能にします - Increases the effectiveness of a resource + リソースの有効性を向上させます - Sends data out of the environment + 環境からデータを送信します - Use the Test verb + Test 動詞を使用する - Removes an item from the top of a stack + スタックの一番上から項目を削除します - Safeguards a resource from attack or loss + 攻撃や損失からリソースを保護します - Makes a resource available to others + リソースを他のユーザーが使用できるようにします - Adds an item to the top of a stack + スタックの一番上に項目を追加します - Acquires information from a source + ソースから情報を取得します - Accepts information sent from a source + ソースから送信された情報を受け入れます - Resets a resource to the state that was undone + 元に戻された状態にリソースをリセットします - Creates an entry for a resource in a repository such as a database + データベースなどのリポジトリにリソースのエントリを作成します - Deletes a resource from a container + コンテナーからリソースを削除します - Changes the name of a resource + リソースの名前を変更します - Restores a resource to a usable condition + リソースを使用できる状態に復元します - Asks for a resource or asks for permissions + リソースの要求またはアクセス許可を要求します - Sets a resource back to its original state + リソースを元の状態に戻します - Changes the size of a resource + リソースのサイズを変更します - Maps a shorthand representation of a resource to a more complete representation + リソースの簡略表現をより完全な表現にマップします - Stops an operation and then starts it again + 操作を停止し、再び開始します - Sets a resource to a predefined state, such as a state set by Checkpoint + チェックポイントによって設定された状態など、定義済みの状態にリソースを設定します - Starts an operation that has been suspended + 中断されていた操作を開始します - Specifies an action that does not allow access to a resource + リソースへのアクセスを許可しないアクションを指定します - Preserves data to avoid loss + データを保持して損失を回避します - Creates a reference to a resource in a container + コンテナー内のリソースへの参照を作成します - Locates a resource in a container + コンテナー内のリソースを検索します - Delivers information to a destination + 宛先に情報を配信します - Replaces data on an existing resource or creates a resource that contains some data + 既存のリソースのデータを置き換えるか、一部のデータを含むリソースを作成します - Makes a resource visible to the user + リソースをユーザーに表示できるようにする - Assures that two or more resources are in the same state + 2 つ以上のリソースが同じ状態であることを保証します - Bypasses one or more resources or points in a sequence + シーケンス内の 1 つ以上のリソースまたはポイントをバイパスします - Separates parts of a resource + リソースの一部を分離します - Initiates an operation + 操作を開始します - Moves to the next point or resource in a sequence + シーケンス内の次のポイントまたはリソースに移動します - Discontinues an activity + アクティビティを中止します - Presents a resource for approval + 承認のためのリソースを提示します - Pauses an activity + アクティビティを一時停止します - Specifies an action that alternates between two resources, such as to change between two locations, responsibilities, or states + 2 つの場所、責任、状態の間で変更するなど、2 つのリソースを代替するアクションを指定します - Verifies the operation or consistency of a resource + リソースの操作または整合性を検証します - Tracks the activities of a resource + リソースのアクティビティを追跡します - Removes restrictions to a resource + リソースに対する制限を削除します - Sets a resource to its previous state + リソースを以前の状態に設定します - Removes a resource from an indicated location + 指定された場所からリソースを削除します - Releases a resource that was locked + ロックされたリソースを解放します - Removes safeguards from a resource that were added to prevent it from attack or loss + 攻撃や損失を防ぐために追加されたリソースからセーフガードを削除します - Makes a resource unavailable to others + リソースを他のユーザーが使用できないようにします - Removes the entry for a resource from a repository + リポジトリからリソースのエントリを削除します - Brings a resource up-to-date to maintain its state, accuracy, conformance, or compliance + リソースを最新の状態、精度、準拠、またはコンプライアンスを維持します - Uses or includes a resource to do something + リソースを使用または組み込んで何らかの処理を行います - Pauses an operation until a specified event occurs + 指定したイベントが発生するまで操作を一時停止します - Continually inspects or monitors a resource for changes + リソースの変更を継続的に検査または監視します - Adds information to a target + ターゲットに情報を追加します \ No newline at end of file diff --git a/src/System.Management.Automation/resources/pl/SubsystemStrings.pl.resx b/src/System.Management.Automation/resources/pl/SubsystemStrings.pl.resx index 6fbbda319de..e5e02264d88 100644 --- a/src/System.Management.Automation/resources/pl/SubsystemStrings.pl.resx +++ b/src/System.Management.Automation/resources/pl/SubsystemStrings.pl.resx @@ -118,42 +118,42 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The subsystem '{0}' does not allow more than one implementation to be registered. + Podsystem „{0}” nie zezwala na zarejestrowanie więcej niż jednej implementacji. - The implementation with Id '{0}' was already registered for the subsystem '{1}'. + Implementacja o identyfikatorze „{0}” została już zarejestrowana dla podsystemu „{1}”. - The subsystem '{0}' does not allow the unregistration of an implementation. + Podsystem „{0}” nie zezwala na wyrejestrowywanie implementacji. - No implementation was registered for the subsystem '{0}'. + Nie zarejestrowano implementacji dla podsystemu „{0}”. - A registered implementation with the Id '{0}' was not found. + Nie znaleziono zarejestrowanej implementacji o identyfikatorze „{0}”. - The specified subsystem type '{0}' is unknown. + Wskazany typ podsystemu „{0}” jest nieznany. - You must specify a concrete subsystem type instead of the base interface 'ISubsystem'. + Należy określić konkretny typ podsystemu zamiast interfejsu podstawowego „ISubsystem”. - The specified subsystem kind '{0}' is unknown. + Wskazany rodzaj podsystemu „{0}” jest nieznany. - For the target subsystem kind '{0}', the specified subsystem instance needs to implement the corresponding concrete interface or abstract class '{1}'. + W przypadku typu podsystemu docelowego „{0}” określone wystąpienie podsystemu musi zaimplementować odpowiadający mu konkretny interfejs lub klasę abstrakcyjną „{1}”. - The declared metadata for subsystem kind '{0}' is invalid. A subsystem that requires cmdlets or functions to be defined cannot allow multiple registrations because that would result in one implementation overwriting the commands defined by another implementation. + Zadeklarowane metadane dla rodzaju podsystemu „{0}” są nieprawidłowe. Podsystem, który wymaga zdefiniowania poleceń cmdlet lub funkcji, nie może zezwalać na wiele rejestracji, ponieważ spowodowałoby to zastąpienie przez jedną implementację poleceń zdefiniowanych przez inną implementację. - The 'Id' property of an implementation for the subsystem '{0}' cannot be an empty GUID. + Właściwość „Id” implementacji podsystemu „{0}” nie może być pustym identyfikatorem GUID. - The 'Name' property of an implementation for the subsystem '{0}' cannot be null or an empty string. + Właściwość „Name” implementacji podsystemu „{0}” nie może mieć wartości null ani być pustym ciągiem. - The 'Description' property of an implementation for the subsystem '{0}' cannot be null or an empty string. + Właściwość „Description” implementacji podsystemu „{0}” nie może mieć wartości null ani być pustym ciągiem. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/ru/SessionStateProviderBaseStrings.ru.resx b/src/System.Management.Automation/resources/ru/SessionStateProviderBaseStrings.ru.resx index f42f935cec9..8a784e4011d 100644 --- a/src/System.Management.Automation/resources/ru/SessionStateProviderBaseStrings.ru.resx +++ b/src/System.Management.Automation/resources/ru/SessionStateProviderBaseStrings.ru.resx @@ -118,39 +118,39 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Set Item + Задать элемент - Item: {0} Value: {1} + Элемент: {0} Значение: {1} - Clear Item + Очистить элемент - Item: {0} + Элемент: {0} - Remove Item + Удалить элемент - Item: {0} + Элемент: {0} - New Item + Новый элемент - Item: {0} Type: {1} Value: {2} + Элемент: {0} Тип: {1} Значение: {2} - Copy Item + Копировать элемент - Item: {0} Destination: {1} + Элемент: {0} Назначение: {1} - Rename Item + Переименовать элемент - Item: {0} NewName: {1} + Элемент: {0} NewName: {1} \ No newline at end of file diff --git a/src/System.Management.Automation/resources/ru/SubsystemStrings.ru.resx b/src/System.Management.Automation/resources/ru/SubsystemStrings.ru.resx index 6fbbda319de..15c1300bedf 100644 --- a/src/System.Management.Automation/resources/ru/SubsystemStrings.ru.resx +++ b/src/System.Management.Automation/resources/ru/SubsystemStrings.ru.resx @@ -118,42 +118,42 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The subsystem '{0}' does not allow more than one implementation to be registered. + Подсистема {0} не допускает регистрацию более одной реализации. - The implementation with Id '{0}' was already registered for the subsystem '{1}'. + Реализация с идентификатором {0} уже зарегистрирована для подсистемы {1}. - The subsystem '{0}' does not allow the unregistration of an implementation. + Подсистема {0} не позволяет отменить регистрацию реализации. - No implementation was registered for the subsystem '{0}'. + Для подсистемы {0} не зарегистрирована ни одна реализация. - A registered implementation with the Id '{0}' was not found. + Зарегистрированная реализация с идентификатором {0} не найдена. - The specified subsystem type '{0}' is unknown. + Указанный тип подсистемы {0} неизвестен. - You must specify a concrete subsystem type instead of the base interface 'ISubsystem'. + Необходимо указать конкретный тип подсистемы вместо базового интерфейса «ISubsystem». - The specified subsystem kind '{0}' is unknown. + Указанный вид подсистемы {0} неизвестен. - For the target subsystem kind '{0}', the specified subsystem instance needs to implement the corresponding concrete interface or abstract class '{1}'. + Для типа целевой подсистемы {0} указанный экземпляр подсистемы должен реализовывать соответствующий конкретный интерфейс или абстрактный класс {1}. - The declared metadata for subsystem kind '{0}' is invalid. A subsystem that requires cmdlets or functions to be defined cannot allow multiple registrations because that would result in one implementation overwriting the commands defined by another implementation. + Объявленные метаданные для типа подсистемы {0} недопустимы. Подсистема, требующая определения командлетов или функций, не допускает множественной регистрации, поскольку это привело бы к тому, что одна реализация перезаписала бы команды, определенные другой реализацией. - The 'Id' property of an implementation for the subsystem '{0}' cannot be an empty GUID. + Свойство «Id» реализации для подсистемы {0} не может быть пустым GUID. - The 'Name' property of an implementation for the subsystem '{0}' cannot be null or an empty string. + Свойство «Name» реализации для подсистемы {0} не может иметь значение NULL или быть пустой строкой. - The 'Description' property of an implementation for the subsystem '{0}' cannot be null or an empty string. + Свойство «Description» реализации для подсистемы {0} не может иметь значение NULL или быть пустой строкой. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/ru/VerbDescriptionStrings.ru.resx b/src/System.Management.Automation/resources/ru/VerbDescriptionStrings.ru.resx index 175483ed225..893adf60509 100644 --- a/src/System.Management.Automation/resources/ru/VerbDescriptionStrings.ru.resx +++ b/src/System.Management.Automation/resources/ru/VerbDescriptionStrings.ru.resx @@ -118,303 +118,303 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Adds a resource to a container, or attaches an item to another item + Добавляет ресурс в контейнер или прикрепляет один элемент к другому - Confirms or agrees to the status of a resource or process + Утверждает или одобряет состояние ресурса или процесса - Affirms the state of a resource + Подтверждает состояние ресурса - Stores data by replicating it + Сохраняет данные путем репликации - Restricts access to a resource + Ограничивает доступ к ресурсу - Creates an artifact (usually a binary or document) out of some set of input files (usually source code or declarative documents) + Создает артефакт (обычно двоичный код или документ) из набора входных файлов (обычно это исходный код или декларативные документы) - Creates a snapshot of the current state of the data or of its configuration + Создает моментальный снимок текущего состояния данных или их конфигурации - Removes all the resources from a container but does not delete the container + Удаляет все ресурсы из контейнера, но не удаляет сам контейнер - Changes the state of a resource to make it inaccessible, unavailable, or unusable + Изменяет состояние ресурса, чтобы сделать его недоступным или непригодным для использования - Evaluates the data from one resource against the data from another resource + Сравнивает данные из одного ресурса с данными из другого - Concludes an operation + Завершает операцию - Compacts the data of a resource + Сжимает данные ресурса - Acknowledges, verifies, or validates the state of a resource or process + Подтверждает или проверяет состояние ресурса или процесса - Creates a link between a source and a destination + Создает связь между источником и назначением - Changes the data from one representation to another when the cmdlet supports bidirectional conversion or when the cmdlet supports conversion between multiple data types + Изменяет данные из одного представления в другое, если командлет поддерживает двунаправленное преобразование или преобразование между несколькими типами данных - Converts one primary type of input (the cmdlet noun indicates the input) to one or more supported output types + Преобразует один первичный тип входных данных (существительное в командлете указывает входные данные) в один или несколько поддерживаемых типов выходных данных - Converts from one or more types of input to a primary output type (the cmdlet noun indicates the output type) + Преобразует один или несколько типов входных данных в основной тип выходных данных (существительное в командлете указывает тип выходных данных) - Copies a resource to another name or to another container + Копирует ресурс в другое имя или другой контейнер - Examines a resource to diagnose operational problems + Изучает ресурс для диагностики проблем в работе - Refuses, objects, blocks, or opposes the state of a resource or process + Отклоняет объекты и блоки или препятствует состоянию ресурса или процесса - Sends an application, website, or solution to a remote target[s] in such a way that a consumer of that solution can access it after deployment is complete + Отправляет приложение, веб-сайт или решение на удаленный целевой объект таким образом, чтобы потребитель этого решения мог получить к нему доступ после завершения развертывания - Configures a resource to an unavailable or inactive state + Настраивает для ресурса недоступное или неактивное состояние - Breaks the link between a source and a destination + Удаляет связь между источником и назначением - Detaches a named entity from a location + Отключает именованную сущность от расположения - Modifies existing data by adding or removing content + Изменяет существующие данные путем добавления или удаления содержимого - Configures a resource to an available or active state + Настраивает для ресурса доступное или активное состояние - Specifies an action that allows the user to move into a resource + Указывает действие, которое позволяет пользователю переместиться в ресурс - Sets the current environment or context to the most recently used context + Переходит к последней использованной среде или контексту - Restores the data of a resource that has been compressed to its original state + Восстанавливает сжатые данные ресурса до исходного состояния - Encapsulates the primary input into a persistent data store, such as a file, or into an interchange format + Инкапсулирует первичные входные данные в постоянное хранилище данных, например файл, или в формат обмена - Looks for an object in a container that is unknown, implied, optional, or specified + Ищет в контейнере объект, который является неизвестным, подразумеваемым, необязательным или указанным - Arranges objects in a specified form or layout + Упорядочивает объекты в указанной форме или макете - Specifies an action that retrieves a resource + Указывает действие, которое извлекает ресурс - Allows access to a resource + Разрешает доступ к ресурсу - Arranges or associates one or more resources + Упорядочивает или связывает один или несколько ресурсов - Makes a resource undetectable + Делает ресурс недоступным для обнаружения - Creates a resource from data that is stored in a persistent data store (such as a file) or in an interchange format + Создает ресурс на основе данных, хранящихся в постоянном хранилище данных (например, в файле) или в формате обмена - Prepares a resource for use, and sets it to a default state + Подготавливает ресурс для использования и задает для него состояние по умолчанию - Places a resource in a location, and optionally initializes it + Помещает ресурс в расположение и при необходимости инициализирует его - Performs an action, such as running a command or a method + Выполняет действие, например запуск команды или метода - Combines resources into one resource + Объединяет ресурсы в один ресурс - Applies constraints to a resource + Применяет ограничения к ресурсу - Secures a resource + Защищает ресурс - Identifies resources that are consumed by a specified operation, or retrieves statistics about a resource + Определяет ресурсы, используемые указанной операцией, или получает статистику по ресурсу - Creates a single resource from multiple resources + Создает один ресурс из нескольких - Attaches a named entity to a location + Подключает именованную сущность к расположению - Moves a resource from one location to another + Перемещает ресурс из одного места в другое - Creates a resource + Создает ресурс - Changes the state of a resource to make it accessible, available, or usable + Изменяет состояние ресурса, чтобы сделать его доступным или пригодным для использования - Increases the effectiveness of a resource + Повышает эффективность ресурса - Sends data out of the environment + Отправляет данные из среды - Use the Test verb + Используйте команду Test - Removes an item from the top of a stack + Удаляет элемент из верхней части стека - Safeguards a resource from attack or loss + Защищает ресурс от атак или потери - Makes a resource available to others + Делает ресурс доступным для других пользователей - Adds an item to the top of a stack + Добавляет элемент в верхнюю часть стека - Acquires information from a source + Получает сведения из источника - Accepts information sent from a source + Принимает сведения, отправляемые из источника - Resets a resource to the state that was undone + Сбрасывает ресурс до состояния, которое было отменено - Creates an entry for a resource in a repository such as a database + Создает запись для ресурса в репозитории, например в базе данных - Deletes a resource from a container + Удаляет ресурс из контейнера - Changes the name of a resource + Изменяет имя ресурса - Restores a resource to a usable condition + Восстанавливает ресурс в пригодном для использования состоянии. - Asks for a resource or asks for permissions + Запрашивает ресурс или разрешения - Sets a resource back to its original state + Присваивает ресурсу исходное состояние - Changes the size of a resource + Изменяет размер ресурса - Maps a shorthand representation of a resource to a more complete representation + Сопоставляет сокращенное представление ресурса с более полным представлением - Stops an operation and then starts it again + Останавливает операцию и запускает ее снова - Sets a resource to a predefined state, such as a state set by Checkpoint + Задает для ресурса предопределенное состояние, например состояние, заданное контрольной точкой - Starts an operation that has been suspended + Запускает приостановленную операцию - Specifies an action that does not allow access to a resource + Указывает действие, которое не разрешает доступ к ресурсу - Preserves data to avoid loss + Сохраняет данные, чтобы избежать их потери - Creates a reference to a resource in a container + Создает ссылку на ресурс в контейнере - Locates a resource in a container + Находит ресурс в контейнере - Delivers information to a destination + Доставляет сведения в место назначения - Replaces data on an existing resource or creates a resource that contains some data + Заменяет данные существующего ресурса или создает ресурс, содержащий некоторые данные - Makes a resource visible to the user + Делает ресурс видимым для пользователя - Assures that two or more resources are in the same state + Гарантирует, что два ресурса или более находятся в одном и том же состоянии - Bypasses one or more resources or points in a sequence + Обходит один или несколько ресурсов или точек в последовательности - Separates parts of a resource + Разделяет части ресурса - Initiates an operation + Инициирует операцию - Moves to the next point or resource in a sequence + Переходит к следующей точке или ресурсу в последовательности - Discontinues an activity + Прерывает действие - Presents a resource for approval + Представляет ресурс для утверждения - Pauses an activity + Приостанавливает действие - Specifies an action that alternates between two resources, such as to change between two locations, responsibilities, or states + Указывает действие, которое обозначает смену между двумя ресурсами, например переход между двумя расположениями, обязанностями или состояниями - Verifies the operation or consistency of a resource + Проверяет операцию или согласованность ресурса - Tracks the activities of a resource + Отслеживает действия ресурса - Removes restrictions to a resource + Удаляет ограничения для ресурса - Sets a resource to its previous state + Задает для ресурса предыдущее состояние - Removes a resource from an indicated location + Удаляет ресурс из указанного расположения - Releases a resource that was locked + Освобождает заблокированный ресурс - Removes safeguards from a resource that were added to prevent it from attack or loss + Удаляет меры защиты для ресурса, которые были добавлены, чтобы предотвратить атаку или потерю - Makes a resource unavailable to others + Делает ресурс недоступным для других пользователей - Removes the entry for a resource from a repository + Удаляет запись для ресурса из репозитория - Brings a resource up-to-date to maintain its state, accuracy, conformance, or compliance + Обеспечивает актуальность ресурса для поддержания его состояния, точности, согласованности или соответствия требованиям - Uses or includes a resource to do something + Использует или включает ресурс для чего-либо - Pauses an operation until a specified event occurs + Приостанавливает операцию, пока не произойдет указанное событие - Continually inspects or monitors a resource for changes + Постоянно проверяет или отслеживает изменения в ресурсе - Adds information to a target + Добавляет сведения в целевой объект \ No newline at end of file diff --git a/src/System.Management.Automation/resources/tr/SessionStateProviderBaseStrings.tr.resx b/src/System.Management.Automation/resources/tr/SessionStateProviderBaseStrings.tr.resx index f42f935cec9..a8c17fce14a 100644 --- a/src/System.Management.Automation/resources/tr/SessionStateProviderBaseStrings.tr.resx +++ b/src/System.Management.Automation/resources/tr/SessionStateProviderBaseStrings.tr.resx @@ -118,39 +118,39 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Set Item + Öğeyi Ayarla - Item: {0} Value: {1} + Öğe: {0} Değer: {1} - Clear Item + Öğeyi Temizle - Item: {0} + Öğe: {0} - Remove Item + Öğeyi Kaldır - Item: {0} + Öğe: {0} - New Item + Yeni Öğe - Item: {0} Type: {1} Value: {2} + Öğe: {0} Tür: {1} Değer: {2} - Copy Item + Öğeyi Kopyala - Item: {0} Destination: {1} + Öğe: {0} Hedef: {1} - Rename Item + Öğeyi Yeniden Adlandır - Item: {0} NewName: {1} + Öğe: {0} NewName: {1} \ No newline at end of file diff --git a/src/System.Management.Automation/resources/tr/SubsystemStrings.tr.resx b/src/System.Management.Automation/resources/tr/SubsystemStrings.tr.resx index 6fbbda319de..319610c4844 100644 --- a/src/System.Management.Automation/resources/tr/SubsystemStrings.tr.resx +++ b/src/System.Management.Automation/resources/tr/SubsystemStrings.tr.resx @@ -118,42 +118,42 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The subsystem '{0}' does not allow more than one implementation to be registered. + ‘{0}' alt sistemi, birden fazla uygulamanın kaydedilmesine izin vermez. - The implementation with Id '{0}' was already registered for the subsystem '{1}'. + Id'si '{0}' olan uygulama, '{1}' alt sistemi için zaten kaydedilmişti. - The subsystem '{0}' does not allow the unregistration of an implementation. + ‘{0}' alt sistemi, bir uygulamanın kaydının silinmesine izin vermez. - No implementation was registered for the subsystem '{0}'. + “{0}” alt sistemi için kayıtlı bir gerçekleştirim bulunamadı. - A registered implementation with the Id '{0}' was not found. + ‘{0}' Id'sine sahip kayıtlı bir uygulama bulunamadı. - The specified subsystem type '{0}' is unknown. + Belirtilen '{0}' alt sistem türü bilinmiyor. - You must specify a concrete subsystem type instead of the base interface 'ISubsystem'. + Temel arabirim 'ISubsystem' yerine somut bir alt sistem türü belirtmelisiniz. - The specified subsystem kind '{0}' is unknown. + Belirtilen '{0}' alt sistem türü bilinmiyor. - For the target subsystem kind '{0}', the specified subsystem instance needs to implement the corresponding concrete interface or abstract class '{1}'. + ‘{0}' hedef alt sistem türü için, belirtilen alt sistem örneğinin karşılık gelen somut arabirimi veya soyut sınıfı '{1}' uygulaması gerekir. - The declared metadata for subsystem kind '{0}' is invalid. A subsystem that requires cmdlets or functions to be defined cannot allow multiple registrations because that would result in one implementation overwriting the commands defined by another implementation. + ‘{0}' alt sistemi türü için bildirilen meta veriler geçersiz. Cmdlet'lerin veya işlevlerin tanımlanmasını gerektiren bir alt sistem, bir uygulamanın başka bir uygulama tarafından tanımlanan komutların üzerine yazmasına neden olacağından birden fazla kayda izin veremez. - The 'Id' property of an implementation for the subsystem '{0}' cannot be an empty GUID. + ‘{0}' alt sistemi için uygulamanın 'Id' özelliği boş bir GUID olamaz. - The 'Name' property of an implementation for the subsystem '{0}' cannot be null or an empty string. + ‘{0}' alt sistemi için uygulamanın 'Name' özelliği null veya boş bir dize olamaz. - The 'Description' property of an implementation for the subsystem '{0}' cannot be null or an empty string. + ‘{0}' alt sistemi için uygulamanın 'Description' özelliği null veya boş bir dize olamaz. \ No newline at end of file diff --git a/src/System.Management.Automation/resources/tr/TabCompletionStrings.tr.resx b/src/System.Management.Automation/resources/tr/TabCompletionStrings.tr.resx index 30debf0f2bf..9d4e1761827 100644 --- a/src/System.Management.Automation/resources/tr/TabCompletionStrings.tr.resx +++ b/src/System.Management.Automation/resources/tr/TabCompletionStrings.tr.resx @@ -118,154 +118,154 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The tab completion result cannot be properly deserialized because the remote runspace does not contain a TypeTable instance. + Uzak çalışma alanı bir TypeTable örneği içermediğinden sekme tamamlama sonucu düzgün şekilde seri durumdan çıkarılamıyor. - Cannot access properties on a null instance of the type CompletionResult. + CompletionResult türünün null örneğindeki özelliklere erişilemez. - Bitwise NOT + Bit düzeyinde NOT - Logical not. Negates the statement that follows it. + Mantıksal NOT. Ardından gelen ifadeyi olumsuz yapar. - Equal to - case insensitive. When the left operand is a collection, returns values from the collection that equal the right operand, otherwise returns TRUE if the left operand equals the right operand. + Eşittir - büyük/küçük harfe duyarsız. Sol işlenen bir koleksiyon olduğunda, sağ işlenene eşit olan koleksiyondan değerler döndürür, aksi takdirde sol işlenen sağ işlenene eşitse TRUE döndürür. - Equal to - case insensitive. When the left operand is a collection, returns values from the collection that equal the right operand, otherwise returns TRUE if the left operand equals the right operand. + Eşittir - büyük/küçük harfe duyarsız. Sol işlenen bir koleksiyon olduğunda, sağ işlenene eşit olan koleksiyondan değerler döndürür, aksi takdirde sol işlenen sağ işlenene eşitse TRUE döndürür. - Equal to - case sensitive. When the left operand is a collection, returns values from the collection that equal the right operand, otherwise returns TRUE if the left operand equals the right operand. + Eşittir - büyük/küçük harfe duyarlı. Sol işlenen bir koleksiyon olduğunda, sağ işlenene eşit olan koleksiyondan değerler döndürür, aksi takdirde sol işlenen sağ işlenene eşitse TRUE döndürür. - Not equal to - case insensitive. When the left operand is a collection, returns values from the collection that do not equal the right operand, otherwise returns TRUE if the left operand does not equal the right operand. + Eşit değildir - büyük/küçük harfe duyarsız. Sol işlenen bir koleksiyon olduğunda koleksiyondaki sağ işlenenle eşit olmayan değerleri döndürür. Aksi halde sol işlenen sağ işlenenle eşit değilse TRUE döndürür. - Not equal to - case insensitive. When the left operand is a collection, returns values from the collection that do not equal the right operand, otherwise returns TRUE if the left operand does not equal the right operand. + Eşit değildir - büyük/küçük harfe duyarsız. Sol işlenen bir koleksiyon olduğunda koleksiyondaki sağ işlenenle eşit olmayan değerleri döndürür. Aksi halde sol işlenen sağ işlenenle eşit değilse TRUE döndürür. - Not equal to - case sensitive. When the left operand is a collection, returns values from the collection that do not equal the right operand, otherwise returns TRUE if the left operand does not equal the right operand. + Eşit değildir - büyük/küçük harfe duyarlı. Sol işlenen bir koleksiyon olduğunda koleksiyondaki sağ işlenenle eşit olmayan değerleri döndürür. Aksi halde sol işlenen sağ işlenenle eşit değilse TRUE döndürür. - Greater than or equal to - case insensitive. When the left operand is a collection, returns values from the collection that are greater than or equal to the right operand, otherwise returns TRUE if the left operand is greater than or equal to the right operand. + Büyüktür veya eşittir - büyük/küçük harfe duyarsız. Sol işlenen bir koleksiyon olduğunda, koleksiyondan sağ işlenenden büyük veya ona eşit değerleri döndürür. Aksi halde, sol işlenen sağ işlenenden büyük veya ona eşitse TRUE döndürür. - Greater than or equal to - case insensitive. When the left operand is a collection, returns values from the collection that are greater than or equal to the right operand, otherwise returns TRUE if the left operand is greater than or equal to the right operand. + Büyüktür veya eşittir - büyük/küçük harfe duyarsız. Sol işlenen bir koleksiyon olduğunda, koleksiyondan sağ işlenenden büyük veya ona eşit değerleri döndürür. Aksi halde, sol işlenen sağ işlenenden büyük veya ona eşitse TRUE döndürür. - Greater than or equal to - case sensitive. When the left operand is a collection, returns values from the collection that are greater than or equal to the right operand, otherwise returns TRUE if the left operand is greater than or equal to the right operand. + Küçüktür veya eşittir - büyük/küçük harfe duyarlı. Sol işlenen bir koleksiyon olduğunda, koleksiyondan sağ işlenenden büyük veya ona eşit değerleri döndürür. Aksi halde, sol işlenen sağ işlenenden büyük veya ona eşitse TRUE döndürür. - Greater than - case insensitive. When the left operand is a collection, returns values from the collection that are greater than the right operand, otherwise returns TRUE if the left operand is greater than the right operand. + Büyüktür - büyük/küçük harfe duyarlı değil. Sol işlenen bir koleksiyon olduğunda, sağ işlenenden büyük olan koleksiyondan değerler döndürür, aksi takdirde sol işlenen sağ işlenenden büyükse TRUE döndürür. - Greater than - case insensitive. When the left operand is a collection, returns values from the collection that are greater than the right operand, otherwise returns TRUE if the left operand is greater than the right operand. + Büyüktür - büyük/küçük harfe duyarlı değil. Sol işlenen bir koleksiyon olduğunda, sağ işlenenden büyük olan koleksiyondan değerler döndürür, aksi takdirde sol işlenen sağ işlenenden büyükse TRUE döndürür. - Greater than - case sensitive. When the left operand is a collection, returns values from the collection that are greater than the right operand, otherwise returns TRUE if the left operand is greater than the right operand. + Büyüktür - büyük/küçük harfe duyarlı. Sol işlenen bir koleksiyon olduğunda, sağ işlenenden büyük olan koleksiyondan değerler döndürür, aksi takdirde sol işlenen sağ işlenenden büyükse TRUE döndürür. - Less than - case insensitive. When the left operand is a collection, returns values from the collection that are less than the right operand, otherwise returns TRUE if the left operand is less than the right operand. + Küçüktür - büyük/küçük harfe duyarlı değil. Sol işlenen bir koleksiyon olduğunda, sağ işlenenden küçük olan koleksiyondan değerler döndürür, aksi takdirde sol işlenen sağ işlenenden küçükse TRUE döndürür. - Less than - case insensitive. When the left operand is a collection, returns values from the collection that are less than the right operand, otherwise returns TRUE if the left operand is less than the right operand. + Küçüktür - büyük/küçük harfe duyarlı değil. Sol işlenen bir koleksiyon olduğunda, sağ işlenenden küçük olan koleksiyondan değerler döndürür, aksi takdirde sol işlenen sağ işlenenden küçükse TRUE döndürür. - Less than - case sensitive. When the left operand is a collection, returns values from the collection that are less than the right operand, otherwise returns TRUE if the left operand is less than the right operand. + Küçüktür - büyük/küçük harfe duyarlı. Sol işlenen bir koleksiyon olduğunda, sağ işlenenden küçük olan koleksiyondan değerler döndürür, aksi takdirde sol işlenen sağ işlenenden küçükse TRUE döndürür. - Less than or equal to - case insensitive. When the left operand is a collection, returns values from the collection that are less than or equal to the right operand, otherwise returns TRUE if the left operand is less than or equal to the right operand. + Küçüktür veya eşittir - büyük/küçük harfe duyarsız. Sol işlenen bir koleksiyon olduğunda, koleksiyondan sağ işlenenden küçük veya ona eşit değerleri döndürür. Aksi halde, sol işlenen sağ işlenenden küçük veya ona eşitse TRUE döndürür. - Less than or equal to - case insensitive. When the left operand is a collection, returns values from the collection that are less than or equal to the right operand, otherwise returns TRUE if the left operand is less than or equal to the right operand. + Küçüktür veya eşittir - büyük/küçük harfe duyarsız. Sol işlenen bir koleksiyon olduğunda, koleksiyondan sağ işlenenden küçük veya ona eşit değerleri döndürür. Aksi halde, sol işlenen sağ işlenenden küçük veya ona eşitse TRUE döndürür. - Less than or equal to - case sensitive. When the left operand is a collection, returns values from the collection that are less than or equal to the right operand, otherwise returns TRUE if the left operand is less than or equal to the right operand. + Küçüktür veya eşittir - büyük/küçük harfe duyarlı. Sol işlenen bir koleksiyon olduğunda, koleksiyondan sağ işlenenden küçük veya ona eşit değerleri döndürür. Aksi halde, sol işlenen sağ işlenenden küçük veya ona eşitse TRUE döndürür. - Wildcard matching operator - case insensitive. When the left operand is a collection, returns values from the collection that match the right hand operand, otherwise returns TRUE if the left operand matches the right operand. + Joker karakter eşleştirme işleci - büyük/küçük harfe duyarsız. Sol işlenen bir koleksiyon olduğunda koleksiyondaki sağ taraftaki işlenenle eşleşen değerleri döndürür. Aksi halde sol işlenen sağ işlenenle eşleşiyorsa TRUE döndürür. - Wildcard matching operator - case insensitive. When the left operand is a collection, returns values from the collection that match the right hand operand, otherwise returns TRUE if the left operand matches the right operand. + Joker karakter eşleştirme işleci - büyük/küçük harfe duyarsız. Sol işlenen bir koleksiyon olduğunda koleksiyondaki sağ taraftaki işlenenle eşleşen değerleri döndürür. Aksi halde sol işlenen sağ işlenenle eşleşiyorsa TRUE döndürür. - Wildcard matching operator - case sensitive. When the left operand is a collection, returns values from the collection that match the right hand operand, otherwise returns TRUE if the left operand matches the right operand. + Joker karakter eşleştirme işleci - büyük/küçük harfe duyarlı. Sol işlenen bir koleksiyon olduğunda koleksiyondaki sağ taraftaki işlenenle eşleşen değerleri döndürür. Aksi halde sol işlenen sağ işlenenle eşleşiyorsa TRUE döndürür. - Wildcard matching operator - case insensitive. When the left operand is a collection, returns values from the collection that do not match the right hand operand, otherwise returns TRUE if the left operand does not match the right operand. + Joker karakter eşleştirme işleci - büyük/küçük harfe duyarsız. Sol işlenen bir koleksiyon olduğunda koleksiyondaki sağ taraftaki işlenenle eşleşmeyen değerleri döndürür. Aksi halde sol işlenen sağ işlenenle eşleşmiyorsa TRUE döndürür. - Wildcard matching operator - case insensitive. When the left operand is a collection, returns values from the collection that do not match the right hand operand, otherwise returns TRUE if the left operand does not match the right operand. + Joker karakter eşleştirme işleci - büyük/küçük harfe duyarsız. Sol işlenen bir koleksiyon olduğunda koleksiyondaki sağ taraftaki işlenenle eşleşmeyen değerleri döndürür. Aksi halde sol işlenen sağ işlenenle eşleşmiyorsa TRUE döndürür. - Wildcard matching operator - case sensitive. When the left operand is a collection, returns values from the collection that do not match the right hand operand, otherwise returns TRUE if the left operand does not match the right operand. + Joker karakter eşleştirme işleci - büyük/küçük harfe duyarlı. Sol işlenen bir koleksiyon olduğunda koleksiyondaki sağ taraftaki işlenenle eşleşmeyen değerleri döndürür. Aksi halde sol işlenen sağ işlenenle eşleşmiyorsa TRUE döndürür. - Regular expression matching operator - case insensitive. When the left operand is a collection, returns values from the collection that match the right hand operand, otherwise returns TRUE if the left operand matches the right operand. + Normal ifade eşleştirme işleci - büyük/küçük harfe duyarsız. Sol işlenen bir koleksiyon olduğunda koleksiyondaki sağ taraftaki işlenenle eşleşen değerleri döndürür. Aksi halde sol işlenen sağ işlenenle eşleşiyorsa TRUE döndürür. - Regular expression matching operator - case insensitive. When the left operand is a collection, returns values from the collection that match the right hand operand, otherwise returns TRUE if the left operand matches the right operand. + Normal ifade eşleştirme işleci - büyük/küçük harfe duyarsız. Sol işlenen bir koleksiyon olduğunda koleksiyondaki sağ taraftaki işlenenle eşleşen değerleri döndürür. Aksi halde sol işlenen sağ işlenenle eşleşiyorsa TRUE döndürür. - Regular expression matching operator - case sensitive. When the left operand is a collection, returns values from the collection that match the right hand operand, otherwise returns TRUE if the left operand matches the right operand. + Normal ifade eşleştirme işleci - büyük/küçük harfe duyarlı. Sol işlenen bir koleksiyon olduğunda koleksiyondaki sağ taraftaki işlenenle eşleşen değerleri döndürür. Aksi halde sol işlenen sağ işlenenle eşleşiyorsa TRUE döndürür. - Regular expression matching operator - case insensitive. When the left operand is a collection, returns values from the collection that do not match the right hand operand, otherwise returns TRUE if the left operand does not match the right operand. + Normal ifade eşleştirme işleci - büyük/küçük harfe duyarsız. Sol işlenen bir koleksiyon olduğunda koleksiyondaki sağ taraftaki işlenenle eşleşmeyen değerleri döndürür. Aksi halde sol işlenen sağ işlenenle eşleşmiyorsa TRUE döndürür. - Regular expression matching operator - case insensitive. When the left operand is a collection, returns values from the collection that do not match the right hand operand, otherwise returns TRUE if the left operand does not match the right operand. + Normal ifade eşleştirme işleci - büyük/küçük harfe duyarsız. Sol işlenen bir koleksiyon olduğunda koleksiyondaki sağ taraftaki işlenenle eşleşmeyen değerleri döndürür. Aksi halde sol işlenen sağ işlenenle eşleşmiyorsa TRUE döndürür. - Regular expression matching operator - case sensitive. When the left operand is a collection, returns values from the collection that do not match the right hand operand, otherwise returns TRUE if the left operand does not match the right operand. + Normal ifade eşleştirme işleci - büyük/küçük harfe duyarlı. Sol işlenen bir koleksiyon olduğunda koleksiyondaki sağ taraftaki işlenenle eşleşmeyen değerleri döndürür. Aksi halde sol işlenen sağ işlenenle eşleşmiyorsa TRUE döndürür. - Replace operator - case insensitive. Changes the left operand. Example: (dir *.ps1).FullName -replace '.ps1$','.ps1.bak' + Değiştirme işleci - büyük/küçük harfe duyarsız. Sol işleneni değiştirir. Örnek: (dir *.ps1).FullName -replace '.ps1$','.ps1.bak' - Replace operator - case insensitive. Changes the left operand. Example: (dir *.ps1).FullName -replace '.ps1$','.ps1.bak' + Değiştirme işleci - büyük/küçük harfe duyarsız. Sol işleneni değiştirir. Örnek: (dir *.ps1).FullName -replace '.ps1$','.ps1.bak' - Replace operator - case sensitive. Changes the left operand. Example: (dir *.ps1).FullName -replace '.ps1$','.ps1.bak' + Değiştirme işleci - büyük/küçük harfe duyarlı. Sol işleneni değiştirir. Örnek: (dir *.ps1).FullName -replace '.ps1$','.ps1.bak' - Containment operator - case insensitive. Returns TRUE when the test value (right operand) exactly matches at least one of the values in the left operand. + Kapsama işleci - büyük/küçük harfe duyarsız. Test değeri (sağ işlenen) sol işlenendeki değerlerden en az biriyle tam olarak eşleştiğinde TRUE değerini döndürür. - Containment operator - case insensitive. Returns TRUE when the test value (right operand) exactly matches at least one of the values in the left operand. + Kapsama işleci - büyük/küçük harfe duyarsız. Test değeri (sağ işlenen) sol işlenendeki değerlerden en az biriyle tam olarak eşleştiğinde TRUE değerini döndürür. - Containment operator - case sensitive. Returns TRUE only when the test value (right operand) exactly matches at least one of the values in the left operand. + Kapsama işleci - büyük/küçük harfe duyarlı. Yalnızca test değeri (sağ işlenen) sol işlenendeki değerlerden en az biriyle tam olarak eşleştiğinde TRUE değerini döndürür. - Containment operator - case insensitive. Returns TRUE when the test value (right operand) exactly matches none of the values in the left operand. + Kapsama işleci - büyük/küçük harfe duyarsız. Test değeri (sağ işlenen) sol işlenendeki değerlerden hiçbiriyle tam olarak eşleşmediğinde TRUE değerini döndürür. - Containment operator - case insensitive. Returns TRUE when the test value (right operand) exactly matches none of the values in the left operand. + Kapsama işleci - büyük/küçük harfe duyarsız. Test değeri (sağ işlenen) sol işlenendeki değerlerden hiçbiriyle tam olarak eşleşmediğinde TRUE değerini döndürür. - Containment operator - case sensitive. Returns TRUE when the test value (right operand) exactly matches none of the values in the left operand. + Kapsama işleci - büyük/küçük harfe duyarlı. Test değeri (sağ işlenen) sol işlenendeki değerlerden hiçbiriyle tam olarak eşleşmediğinde TRUE değerini döndürür. - Containment operator - case insensitive. Returns TRUE when the test value (left operand) exactly matches at least one of the values in the right operand. + Kapsama işleci - büyük/küçük harfe duyarsız. Test değeri (sol işlenen) sağ işlenendeki değerlerden en az biriyle tam olarak eşleştiğinde TRUE değerini döndürür. - Containment operator - case insensitive. Returns TRUE when the test value (left operand) exactly matches at least one of the values in the right operand. + Kapsama işleci - büyük/küçük harfe duyarsız. Test değeri (sol işlenen) sağ işlenendeki değerlerden en az biriyle tam olarak eşleştiğinde TRUE değerini döndürür. - Containment operator - case sensitive. Returns TRUE when the test value (left operand) exactly matches at least one of the values in the right operand. + Kapsama işleci - büyük/küçük harfe duyarlı. Test değeri (sol işlenen) sağ işlenendeki değerlerden en az biriyle tam olarak eşleştiğinde TRUE değerini döndürür. - Containment operator - case sensitive. Returns TRUE when the test value (left operand) exactly matches none of the values in the right operand. + Kapsama işleci - büyük/küçük harfe duyarlı. Test değeri (sol işlenen) sağ işlenendeki değerlerden hiçbiriyle tam olarak eşleşmediğinde TRUE değerini döndürür. - Containment operator - case insensitive. Returns TRUE when the test value (left operand) exactly matches none of the values in the right operand. + Kapsama işleci - büyük/küçük harfe duyarsız. Test değeri (sol işlenen) sağ işlenendeki değerlerden hiçbiriyle tam olarak eşleşmediğinde TRUE değerini döndürür. - Containment operator - case sensitive. Returns TRUE when the test value (left operand) exactly matches none of the values in the right operand. + Kapsama işleci - büyük/küçük harfe duyarlı. Test değeri (sol işlenen) sağ işlenendeki değerlerden hiçbiriyle tam olarak eşleşmediğinde TRUE değerini döndürür. - Split - case insensitive. Split one or more strings into substrings. + Bölme - Büyük/küçük harfe duyarsız. Bir ya da daha fazla dizeyi alt dizelere böler. -Split <String> <String> -Split <Delimiter>[,<Max-substrings>[,"<Options>"]] @@ -273,7 +273,7 @@ <String> -Split {<ScriptBlock>} [,<Max-substrings>] - Split - case insensitive. Split one or more strings into substrings. + Bölme - Büyük/küçük harfe duyarsız. Bir ya da daha fazla dizeyi alt dizelere böler. -Split <String> <String> -Split <Delimiter>[,<Max-substrings>[,"<Options>"]] @@ -281,7 +281,7 @@ <String> -Split {<ScriptBlock>} [,<Max-substrings>] - Split - case sensitive. Split one or more strings into substrings. + Bölme - Büyük/küçük harfe duyarlı. Bir ya da daha fazla dizeyi alt dizelere böler. -Split <String> <String> -Split <Delimiter>[,<Max-substrings>[,"<Options>"]] @@ -289,103 +289,103 @@ <String> -Split {<ScriptBlock>} [,<Max-substrings>] - Returns TRUE when the left operand is not an instance of the specified .NET Framework type (right operand). + Sol işlenen belirtilen .NET Framework türünün (sağ işlenen) bir örneği değilse TRUE döndürür. - Returns TRUE when the left operand is an instance of the specified .NET Framework type (right operand). + Sol işlenen belirtilen .NET Framework türünün (sağ işlenen) bir örneğiyse TRUE döndürür. - Converts the left operand to the specified .NET Framework type (right operand). + Sol işleneni belirtilen .NET Framework türüne (sağ işlenen) dönüştürür. - Formats strings by using the format method of string objects. + Dize nesnelerinin biçim yöntemini kullanarak dizeleri biçimlendirir. - Logical and. Returns TRUE when both statements are TRUE. + Mantıksal AND. Her iki ifade de TRUE olduğunda TRUE döndürür. - Bitwise AND + Bit düzeyinde AND - Logical or. TRUE when either or both statements are TRUE. + Mantıksal OR. Deyimlerden biri ya da her ikisi TRUE olduğunda TRUE döndürür. - Bitwise OR (inclusive) + Bit düzeyinde OR (dahil) - Logical exclusive or. Returns TRUE when one of the statements is TRUE and the other is FALSE. + Mantıksal dışlayıcı OR. Deyimlerden biri TRUE diğeri FALSE olduğunda TRUE döndürür. - Bitwise OR (exclusive) + Bit düzeyinde OR (dışlayıcı) - Join - combine multiple strings into a single string. + Birleştir - birden çok dizeyi tek bir dizede birleştirir. -Join <String[]> <String[]> -Join <Delimiter> - Shift Left bit operator. Inserts zero in right-most bit position. + Sola Kaydırma bit işleci. En sağdaki bit konumuna sıfır ekler. - Shift Right bit operator. Inserts zero in the left-most bit position. For signed values, sign bit is preserved. + Sağa Kaydırma bit işleci. En soldaki bit konumuna sıfır ekler. İşaretli değerler için işaret biti korunur. [string] -Specifies the name of the property being created. +Oluşturulan özelliğin adını belirtir. [string] -Specifies the name of the property being created. +Oluşturulan özelliğin adını belirtir. [scriptblock] -A script block used to calculate the value of the new property. +Yeni özelliğin değerini hesaplamak için kullanılan bir betik bloğu. [string] -Define how the values are displayed in a column. -Valid values are 'left', 'center', or 'right'. +Değerlerin bir sütunda nasıl görüntüleneceğini tanımlar. +Geçerli değerler 'left', 'center' veya 'right' değerleridir. [string] -Specifies a format string that defines how the value is formatted for output. +Değerin çıkış için nasıl biçimlendirileceğini tanımlayan bir biçim dizesi belirtir. [int] -Specifies the maximum column width in a table when the value is displayed. -The value must be greater than 0. +Değer görüntülendiğinde tablodaki en fazla sütun genişliğini belirtir. +Değer 0'dan büyük olmalıdır. [int] -The depth key specifies the depth of expansion per property. +Derinlik anahtarı, özellik başına genişletme derinliğini belirtir. [bool] -Specifies the order of sorting for one or more properties. +Bir veya daha fazla özellik için sıralama düzenini belirtir. [bool] -Specifies the order of sorting for one or more properties. +Bir veya daha fazla özellik için sıralama düzenini belirtir. [String[]] -Specifies the log names to get events from. -Supports wildcards. +Olayların alınacağı günlük adlarını belirtir. +Joker karakterleri destekler. [String[]] -Specifies the event log providers to get events from. -Supports wildcards. +Olayların alınacağı olay günlüğü sağlayıcılarını belirtir. +Joker karakterleri destekler. [String[]] -Specifies file paths to log files to get events from. -Valid file formats are: .etl, .evt, and .evtx +Olayların alınacağı günlük dosyalarının dosya yollarını belirtir. +Geçerli dosya biçimleri: .etl, .evt ve .evtx [Long[]] -Selects events with the specified keyword bitmasks. -The following are standard keywords: +Belirtilen anahtar sözcük bit maskelerine sahip olayları seçer. +Aşağıdakiler standart anahtar sözcüklerdir: 4503599627370496: AuditFailure 9007199254740992: AuditSuccess 4503599627370496: CorrelationHint @@ -398,213 +398,213 @@ The following are standard keywords: [int[]] -Selects events with the specified event IDs. +Belirtilen günlük düzeylerine sahip olayları seçer. [int[]] -Selects events with the specified log levels. -The following log levels are valid: -1: Critical -2: Error -3: Warning -4: Informational -5: Verbose +Belirtilen günlük düzeylerine sahip olayları seçer. +Aşağıdaki günlük düzeyleri geçerlidir: +1: Kritik +2: Hata +3: Uyarı +4: Bilgilendirici +5: Ayrıntılı [datetime] -Selects events created after the specified date and time. +Belirtilen tarih ve saatten sonra oluşturulan olayları seçer. [datetime] -Selects events created before the specified date and time. +Belirtilen tarih ve saatten sonra oluşturulan olayları seçer. [string] -Selects events generated by the specified user. -This can either be a string representation of a SID or a domain and username in the format DOMAIN\USERNAME or USERNAME@DOMAIN +Belirtilen kullanıcı tarafından oluşturulan olayları seçer. +Bu, bir SID'nin dize gösterimi ya da ETKİALANI\KULLANICIADI veya KULLANICIADI@ETKİALANI biçiminde etki alanı ve kullanıcı adı olabilir [string[]] -Selects events with any of the specified values in the EventData section. +EventData bölümünde belirtilen değerlerden herhangi birini içeren olayları seçer. [hashtable] -Excludes events that match the values specified in the hashtable. +Hashtable'da belirtilen değerlerle eşleşen olayları dışlar. - [string] or [hashtable] -Specifies an array of PowerShell modules that the script requires. -Each element can either be a string with the module name as value or a hashtable with the following keys: -Name: Name of the module -GUID: GUID of the module -One of the following: -ModuleVersion: Specifies a minimum acceptable version of the module. -RequiredVersion: Specifies an exact, required version of the module. -MaximumVersion: Specifies the maximum acceptable version of the module. + [string] veya [hashtable] +Betiğin gerektirdiği PowerShell modüllerinden oluşan bir diziyi belirtir. +Her öğe, modül adını değer olarak içeren bir dize ya da aşağıdaki anahtarları içeren bir hashtable olabilir: +Ad: Modülün adı +GUID: Modülün GUID'si +Aşağıdakilerden biri: +ModuleVersion: Modülün kabul edilebilir en düşük sürümünü belirtir. +RequiredVersion: Modülün kesin ve gerekli bir sürümünü belirtir. +MaximumVersion: Modülün kabul edilebilir en yüksek sürümünü belirtir. [string] -Specifies a PowerShell edition that the script requires. -Valid values are "Core" and "Desktop" +Betiğin gerektirdiği bir PowerShell sürümünü belirtir. +Geçerli değerler "Core" ve "Desktop" [switch] -Specifies that PowerShell must be running as administrator on Windows. -This must be the last parameter on the #requires statement line. +PowerShell'in Windows üzerinde yönetici olarak çalışıyor olması gerektiğini belirtir. +Bu, #requires deyimi satırındaki son parametre olmalıdır. [version] -Specifies the minimum version of PowerShell that the script requires. +Betiğin gerektirdiği en düşük PowerShell sürümünü belirtir. - Specifies that the script requires PowerShell 7+ to run. + Betiğin çalışması için PowerShell 7+ gerektirdiğini belirtir. - Specifies that the script requires Windows PowerShell 5.1 to run. + Betiğin çalışması için Windows PowerShell 5.1 gerektirdiğini belirtir. [string] -Required. Specifies the module name. +Gereklidir. Modül adını belirtir. [string] -Optional. Specifies the GUID of the module. +İsteğe bağlıdır. Modülün GUID'sini belirtir. [string] -Specifies a minimum acceptable version of the module. +Modülün kabul edilebilir en düşük sürümünü belirtir. [string] -Specifies an exact, required version of the module. +Modülün kesin ve gerekli bir sürümünü belirtir. [string] -Specifies the maximum acceptable version of the module. +Modülün kabul edilebilir en yüksek sürümünü belirtir. - A brief description of the function or script. -This keyword can be used only once in each topic. + İşlevin veya betiğin kısa açıklaması. +Bu anahtar sözcük her konuda yalnızca bir kez kullanılabilir. - A detailed description of the function or script. -This keyword can be used only once in each topic. + İşlevin veya betiğin ayrıntılı açıklaması. +Bu anahtar sözcük her konuda yalnızca bir kez kullanılabilir. .PARAMETER <Parameter-Name> -The description of a parameter. -Add a .PARAMETER keyword for each parameter in the function or script syntax. +Bir parametrenin açıklaması. +İşlev veya betik söz dizimindeki her parametre için bir .PARAMETER anahtar sözcüğü ekleyin. - A sample command that uses the function or script, optionally followed by sample output and a description. -Repeat this keyword for each example. + İşlevi veya betiği kullanan örnek komut, isteğe bağlı olarak ardından örnek çıkış ve açıklama gelir. +Bu anahtar sözcüğü her örnek için yineleyin. - The .NET types of objects that can be piped to the function or script. -You can also include a description of the input objects. + İşleve veya betiğe gönderilebilecek .NET nesne türleri. +Giriş nesnelerinin açıklamasını da ekleyebilirsiniz. - The .NET type of the objects that the cmdlet returns. -You can also include a description of the returned objects. + Cmdlet'in döndürdüğü nesnelerin .NET türü. +Döndürülen nesnelerin açıklamasını da ekleyebilirsiniz. - Additional information about the function or script. + İşlev veya betik hakkında ek bilgiler. - The name of a related topic. -Repeat the .LINK keyword for each related topic. -The .Link keyword content can also include a URI to an online version of the same help topic. + İlgili bir konunun adı. +Her ilgili konu için .LINK anahtar sözcüğünü yineleyin. +.Link anahtar sözcüğü içeriğine aynı yardım konusunun çevrimiçi sürümüne yönelik bir URI de eklenebilir. - The name of the technology or feature that the function or script uses, or to which it is related. + İşlevin veya betiğin kullandığı ya da ilişkili olduğu teknoloji ya da özelliğin adı. - The name of the user role for the help topic. + Yardım konusu için kullanıcı rolünün adı. - The keywords that describe the intended use of the function. + İşlevin amaçlanan kullanımını açıklayan anahtar sözcükler. .FORWARDHELPTARGETNAME <Command-Name> -Redirects to the help topic for the specified command. +Belirtilen komutun yardım konusuna yönlendirir. .FORWARDHELPCATEGORY <Category> -Specifies the help category of the item in .ForwardHelpTargetName +.ForwardHelpTargetName içindeki öğenin yardım kategorisini belirtir .REMOTEHELPRUNSPACE <PSSession-variable> -Specifies a session that contains the help topic. -Enter a variable that contains a PSSession object. +Yardım konusunu içeren bir oturumu belirtir. +PSSession nesnesi içeren bir değişken girin. .EXTERNALHELP <XML Help File> -The .ExternalHelp keyword is required when a function or script is documented in XML files. +Bir işlev veya betik XML dosyalarında belgelendiğinde .ExternalHelp anahtar sözcüğü gereklidir. - Specifies the path to a .NET assembly to load. + Yüklenecek .NET derlemesinin yolunu belirtir. -using assembly <.NET-assembly-path> +<.NET-assembly-path> derlemesi kullanılıyor - Specifies a PowerShell module to load classes from. + Sınıfların yükleneceği PowerShell modülünü belirtir. using module <ModuleName or Path> using module <ModuleSpecification hashtable> - Specifies a .NET namespace to resolve types from or a namespace alias. + Türlerin çözümleneceği bir .NET ad alanı veya bir ad alanı diğer adı belirtir. using namespace <.NET-namespace> using namespace <AliasName> = <.NET-namespace> - Specifies an alias for a .NET Type. + Bir .NET Türü için bir diğer ad belirtir. using type <AliasName> = <.NET-type> - A normal string. + Normal bir dize. - A string that contains unexpanded references to environment variables that are expanded when the value is retrieved. + Değer alındığında genişletilen ortam değişkenlerine genişletilmemiş başvurular içeren bir dize. - Binary data in any form. + Herhangi bir biçimde ikili veri. - A 32-bit binary number. + 32 bitlik bir ikili sayı. - An array of strings. + Dize dizisi. - A 64-bit binary number. + 64 bitlik bir ikili sayı. - An unsupported registry data type. + Desteklenmeyen bir kayıt defteri veri türü. - ',' - Comma + ',' - Virgül ', ' - Comma-Space - ';' - Semi-Colon + ';' - Noktalı Virgül - '; ' - Semi-Colon-Space + '; ' - Noktalı Virgül-Boşluk - {0} - Newline + {0} - Yeni satır - '-' - Dash + '-' - Kısa çizgi - ' ' - Space + ' ' - Boşluk \ No newline at end of file diff --git a/src/System.Management.Automation/resources/tr/VerbDescriptionStrings.tr.resx b/src/System.Management.Automation/resources/tr/VerbDescriptionStrings.tr.resx index 175483ed225..b82e7add7ec 100644 --- a/src/System.Management.Automation/resources/tr/VerbDescriptionStrings.tr.resx +++ b/src/System.Management.Automation/resources/tr/VerbDescriptionStrings.tr.resx @@ -118,303 +118,303 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Adds a resource to a container, or attaches an item to another item + Bir kaynağı bir kapsayıcıya ekler veya bir öğeyi başka bir öğeye iliştirir - Confirms or agrees to the status of a resource or process + Bir kaynağın veya işlemin durumunu onaylar ya da kabul eder - Affirms the state of a resource + Bir kaynağın durumunu onaylar - Stores data by replicating it + Verileri çoğaltarak depolar - Restricts access to a resource + Bir kaynağa erişimi kısıtlar - Creates an artifact (usually a binary or document) out of some set of input files (usually source code or declarative documents) + Bazı giriş dosyalarından (genellikle kaynak kodu veya bildirimsel belgeler) bir yapıt (genellikle bir ikili veya belge) oluşturur - Creates a snapshot of the current state of the data or of its configuration + Geçerli durumdaki verilerin veya yapılandırmasının anlık görüntüsünü oluşturur - Removes all the resources from a container but does not delete the container + Bir kapsayıcıdaki tüm kaynakları kaldırır ancak kapsayıcıyı silmez - Changes the state of a resource to make it inaccessible, unavailable, or unusable + Bir kaynağın durumunu, erişilemez, kullanılamaz veya işlevsiz olacak şekilde değiştirir - Evaluates the data from one resource against the data from another resource + Bir kaynağın verisini başka bir kaynağın verisiyle karşılaştırır - Concludes an operation + Bir işlemi sonlandırır - Compacts the data of a resource + Bir kaynağın verisini sıkıştırır - Acknowledges, verifies, or validates the state of a resource or process + Bir kaynağın veya işlemin durumunu kabul eder, doğrular veya geçerli kılar - Creates a link between a source and a destination + Bir kaynak ile bir hedef arasında bağlantı oluşturur - Changes the data from one representation to another when the cmdlet supports bidirectional conversion or when the cmdlet supports conversion between multiple data types + Komut desteği çift yönlü dönüştürmeyi veya komut desteği birden çok veri türü arasında dönüştürmeyi sağladığında veriyi bir beyan biçiminden diğerine değiştirir - Converts one primary type of input (the cmdlet noun indicates the input) to one or more supported output types + Birincil giriş türünün (cmdlet adı girişi belirtir) bir veya daha fazla desteklenen çıktı türüne dönüştürür - Converts from one or more types of input to a primary output type (the cmdlet noun indicates the output type) + Birincil çıktı türüne dönüştürür; bir veya daha fazla giriş türünden dönüştürür (cmdlet adı, çıktı türünü belirtir) - Copies a resource to another name or to another container + Bir kaynağı başka bir ada veya başka bir kapsayıcıya kopyalar - Examines a resource to diagnose operational problems + Bir kaynağı operasyonel sorunları tanılamak için inceler - Refuses, objects, blocks, or opposes the state of a resource or process + Bir kaynağın veya işlemin durumunu reddeder, nesne olarak kabul etmez, engeller veya karşı çıkar - Sends an application, website, or solution to a remote target[s] in such a way that a consumer of that solution can access it after deployment is complete + Bir uygulamayı, web sitesini veya çözümü uzak bir hedefe, bu çözümün tüketicisi dağıtım tamamlandıktan sonra ona erişebilecek şekilde gönderir - Configures a resource to an unavailable or inactive state + Bir kaynağı kullanılamaz veya etkin olmayan duruma yapılandırır - Breaks the link between a source and a destination + Bir kaynak ile hedef arasındaki bağlantıyı keser - Detaches a named entity from a location + Adlandırılmış bir varlığın bir konumla bağlantısını keser - Modifies existing data by adding or removing content + Mevcut veriyi içerik ekleyerek veya kaldırarak değiştirir - Configures a resource to an available or active state + Bir kaynağı kullanılabilir veya etkin bir duruma yapılandırır - Specifies an action that allows the user to move into a resource + Kullanıcının bir kaynağa geçmesine izin veren bir eylemi belirtir - Sets the current environment or context to the most recently used context + Geçerli ortamı veya bağlamı en son kullanılan bağlama ayarlar - Restores the data of a resource that has been compressed to its original state + Sıkıştırılmış bir kaynağın verilerini özgün durumuna geri yükler - Encapsulates the primary input into a persistent data store, such as a file, or into an interchange format + Birincil girdiyi, dosya gibi kalıcı bir veri deposuna veya bir değişim biçimine kapsüller - Looks for an object in a container that is unknown, implied, optional, or specified + Bilinmeyen, zımni, isteğe bağlı veya belirtilmiş bir kapsayıcıdaki bir nesneyi arar - Arranges objects in a specified form or layout + Nesneleri belirtilen bir formda veya yerleşimde düzenler - Specifies an action that retrieves a resource + Bir kaynağı almayı belirten bir eylemi belirtir - Allows access to a resource + Bir kaynağa erişim sağlar - Arranges or associates one or more resources + Bir veya daha fazla kaynağı düzenler ya da ilişkilendirir - Makes a resource undetectable + Bir kaynağı algılanamaz hale getirir - Creates a resource from data that is stored in a persistent data store (such as a file) or in an interchange format + Dosya gibi kalıcı bir veri deposunda veya bir değişim biçiminde depolanan verilerden bir kaynak oluşturur - Prepares a resource for use, and sets it to a default state + Bir kaynağı kullanıma hazırlar ve varsayılan bir duruma ayarlar - Places a resource in a location, and optionally initializes it + Bir kaynağı bir konuma yerleştirir ve isteğe bağlı olarak başlatır - Performs an action, such as running a command or a method + Komut veya yöntem çalıştırma gibi bir eylemi gerçekleştirir - Combines resources into one resource + Kaynakları tek bir kaynakta birleştirir - Applies constraints to a resource + Bir kaynağa kısıtlamalar uygular - Secures a resource + Bir kaynağı güvence altına alır - Identifies resources that are consumed by a specified operation, or retrieves statistics about a resource + Belirtilen bir işlem tarafından tüketilen kaynakları belirler veya bir kaynak hakkında istatistikleri alır - Creates a single resource from multiple resources + Birden çok kaynaktan tek bir kaynak oluşturur - Attaches a named entity to a location + Adlandırılmış bir varlığı bir konuma bağlar - Moves a resource from one location to another + Bir kaynağı bir konumdan başka bir konuma taşır - Creates a resource + Bir kaynak oluşturur - Changes the state of a resource to make it accessible, available, or usable + Bir kaynağın durumunu, erişilebilir, kullanılabilir veya kullanılabilir hale gelecek şekilde değiştirir - Increases the effectiveness of a resource + Bir kaynağın etkinliğini artırır - Sends data out of the environment + Verileri ortamın dışına gönderir - Use the Test verb + Test fiilini kullanın - Removes an item from the top of a stack + Yığının en üstündeki öğeyi kaldırır - Safeguards a resource from attack or loss + Bir kaynağı saldırıdan veya kayıptan korur - Makes a resource available to others + Bir kaynağı başkaları için kullanılabilir hale getirir - Adds an item to the top of a stack + Bir öğeyi yığının en üstüne ekler - Acquires information from a source + Bir kaynaktan bilgi alır - Accepts information sent from a source + Kaynak tarafından gönderilen bilgileri kabul eder - Resets a resource to the state that was undone + Bir kaynağı geri alınan duruma sıfırlar - Creates an entry for a resource in a repository such as a database + Bir depo gibi bir veritabanındaki bir kaynak için girdi oluşturur - Deletes a resource from a container + Bir kaynağı bir kapsayıcıdan siler - Changes the name of a resource + Bir kaynağın adını değiştirir - Restores a resource to a usable condition + Bir kaynağı kullanılabilir bir duruma geri yükler - Asks for a resource or asks for permissions + Bir kaynak veya izinler ister - Sets a resource back to its original state + Bir kaynağı özgün durumuna geri ayarlar - Changes the size of a resource + Bir kaynağın boyutunu değiştirir - Maps a shorthand representation of a resource to a more complete representation + Bir kaynağın kısa gösterimini daha eksiksiz bir gösterime eşler - Stops an operation and then starts it again + Bir işlemi durdurur ve ardından yeniden başlatır - Sets a resource to a predefined state, such as a state set by Checkpoint + Bir kaynağı Checkpoint gibi bir işlemle belirlenen önceden tanımlı bir duruma ayarlar - Starts an operation that has been suspended + Askıya alınmış bir işlemi başlatır - Specifies an action that does not allow access to a resource + Bir kaynağa erişime izin vermeyen bir eylemi belirtir - Preserves data to avoid loss + Verileri kaybolmasını önlemek için korur - Creates a reference to a resource in a container + Bir kapsayıcıdaki bir kaynak için başvuru oluşturur - Locates a resource in a container + Bir kapsayıcıdaki bir kaynağı bulur - Delivers information to a destination + Bilgiyi bir hedefe gönderir - Replaces data on an existing resource or creates a resource that contains some data + Mevcut bir kaynaktaki verileri değiştirir veya bazı verileri içeren bir kaynak oluşturur - Makes a resource visible to the user + Kaynağı kullanıcıya görünür yapar - Assures that two or more resources are in the same state + İki veya daha fazla kaynağın aynı durumda olmasını sağlar - Bypasses one or more resources or points in a sequence + Bir dizideki bir veya daha fazla kaynağı ya da noktayı atlar - Separates parts of a resource + Bir kaynağın parçalarını ayırır - Initiates an operation + Bir işlemi başlatır - Moves to the next point or resource in a sequence + Bir dizideki sonraki noktaya veya kaynağa geçer - Discontinues an activity + Bir etkinliği sonlandırır - Presents a resource for approval + Bir kaynağı onay için gönderir - Pauses an activity + Bir etkinliği duraklatır - Specifies an action that alternates between two resources, such as to change between two locations, responsibilities, or states + İki kaynak arasında dönüşümlü bir eylem belirtir; örneğin iki konum, sorumluluk veya durum arasında geçiş yapmak için - Verifies the operation or consistency of a resource + Bir işlemin veya kaynağın tutarlılığını doğrular - Tracks the activities of a resource + Bir kaynağın etkinliklerini izler - Removes restrictions to a resource + Bir kaynağın kısıtlamalarını kaldırır - Sets a resource to its previous state + Bir kaynağı önceki durumuna ayarlar - Removes a resource from an indicated location + Bir kaynağı belirtilen bir konumdan kaldırır - Releases a resource that was locked + Kilitli bir kaynağın kilidini kaldırır - Removes safeguards from a resource that were added to prevent it from attack or loss + Bir kaynağın saldırı veya kayıptan korunması için eklenen güvenlik önlemlerini kaldırır - Makes a resource unavailable to others + Bir kaynağı başkaları için kullanılamaz hale getirir - Removes the entry for a resource from a repository + Bir kaynağın bir depodaki girdisini kaldırır - Brings a resource up-to-date to maintain its state, accuracy, conformance, or compliance + Bir kaynağı durumunu, doğruluğunu, uyumluluğunu veya uygunluğunu korumak için güncel duruma getirir - Uses or includes a resource to do something + Bir görevi gerçekleştirmek için bir kaynağı kullanır veya içerir - Pauses an operation until a specified event occurs + Belirtilen bir olay gerçekleşene kadar bir işlemi duraklatır - Continually inspects or monitors a resource for changes + Değişiklikler için bir kaynağı sürekli olarak inceler veya izler - Adds information to a target + Bir hedefe bilgi ekler \ No newline at end of file diff --git a/src/System.Management.Automation/resources/zh-Hans/SessionStateProviderBaseStrings.zh-Hans.resx b/src/System.Management.Automation/resources/zh-Hans/SessionStateProviderBaseStrings.zh-Hans.resx index f42f935cec9..c053fc726f2 100644 --- a/src/System.Management.Automation/resources/zh-Hans/SessionStateProviderBaseStrings.zh-Hans.resx +++ b/src/System.Management.Automation/resources/zh-Hans/SessionStateProviderBaseStrings.zh-Hans.resx @@ -118,39 +118,39 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Set Item + 设置项 - Item: {0} Value: {1} + 项: {0} 值: {1} - Clear Item + 清除项 - Item: {0} + 项: {0} - Remove Item + 移除项 - Item: {0} + 项: {0} - New Item + 新建项 - Item: {0} Type: {1} Value: {2} + 项目: {0} 类型: {1} 值: {2} - Copy Item + 复制项 - Item: {0} Destination: {1} + 项: {0} 目标: {1} - Rename Item + 重命名项 - Item: {0} NewName: {1} + 项: {0} NewName: {1} \ No newline at end of file diff --git a/src/System.Management.Automation/resources/zh-Hans/SubsystemStrings.zh-Hans.resx b/src/System.Management.Automation/resources/zh-Hans/SubsystemStrings.zh-Hans.resx index 6fbbda319de..d6eabbc0714 100644 --- a/src/System.Management.Automation/resources/zh-Hans/SubsystemStrings.zh-Hans.resx +++ b/src/System.Management.Automation/resources/zh-Hans/SubsystemStrings.zh-Hans.resx @@ -118,42 +118,42 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The subsystem '{0}' does not allow more than one implementation to be registered. + 子系统 "{0}" 不允许注册多个实现。 - The implementation with Id '{0}' was already registered for the subsystem '{1}'. + 已为子系统 "{1}" 注册 ID 为 "{0}" 的实现。 - The subsystem '{0}' does not allow the unregistration of an implementation. + 子系统 "{0}" 不允许取消注册实现。 - No implementation was registered for the subsystem '{0}'. + 未为子系统 "{0}" 注册实现。 - A registered implementation with the Id '{0}' was not found. + 未找到 ID 为 "{0}" 的已注册实现。 - The specified subsystem type '{0}' is unknown. + 指定的子系统类型“{0}”未知。 - You must specify a concrete subsystem type instead of the base interface 'ISubsystem'. + 必须指定具体的子系统类型，而不是基础接口 "ISubsystem"。 - The specified subsystem kind '{0}' is unknown. + 指定的子系统种类“{0}”未知。 - For the target subsystem kind '{0}', the specified subsystem instance needs to implement the corresponding concrete interface or abstract class '{1}'. + 对于目标子系统种类“{0}”，指定的子系统实例需要实现相应的具体接口或抽象类 "{1}"。 - The declared metadata for subsystem kind '{0}' is invalid. A subsystem that requires cmdlets or functions to be defined cannot allow multiple registrations because that would result in one implementation overwriting the commands defined by another implementation. + 子系统类型“{0}”的声明元数据无效。需要定义 cmdlet 或函数的子系统不允许进行多次注册，因为这会导致一个实现覆盖另一个实现定义的命令。 - The 'Id' property of an implementation for the subsystem '{0}' cannot be an empty GUID. + 子系统 "{0}" 的实现的 "ID" 属性不能是空 GUID。 - The 'Name' property of an implementation for the subsystem '{0}' cannot be null or an empty string. + 子系统 "{0}" 的实现的 "Name" 属性不能为 null 或空字符串。 - The 'Description' property of an implementation for the subsystem '{0}' cannot be null or an empty string. + 子系统 "{0}" 的实现的 "Description" 属性不能为 null 或空字符串。 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/zh-Hans/TabCompletionStrings.zh-Hans.resx b/src/System.Management.Automation/resources/zh-Hans/TabCompletionStrings.zh-Hans.resx index 30debf0f2bf..c02e661f0ce 100644 --- a/src/System.Management.Automation/resources/zh-Hans/TabCompletionStrings.zh-Hans.resx +++ b/src/System.Management.Automation/resources/zh-Hans/TabCompletionStrings.zh-Hans.resx @@ -118,154 +118,154 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The tab completion result cannot be properly deserialized because the remote runspace does not contain a TypeTable instance. + 无法正确反序列化 Tab 键补全结果，因为远程运行空间不包含 TypeTable 实例。 - Cannot access properties on a null instance of the type CompletionResult. + 无法访问类型 CompletionResult 的 null 实例上的属性。 - Bitwise NOT + 按位 NOT - Logical not. Negates the statement that follows it. + 逻辑非。对后面的语句取反。 - Equal to - case insensitive. When the left operand is a collection, returns values from the collection that equal the right operand, otherwise returns TRUE if the left operand equals the right operand. + 等于 - 不区分大小写。如果左操作数为集合，则返回该集合中等于右操作数的值；否则，如果左操作数等于右操作数，则返回 TRUE。 - Equal to - case insensitive. When the left operand is a collection, returns values from the collection that equal the right operand, otherwise returns TRUE if the left operand equals the right operand. + 等于 - 不区分大小写。如果左操作数为集合，则返回该集合中等于右操作数的值；否则，如果左操作数等于右操作数，则返回 TRUE。 - Equal to - case sensitive. When the left operand is a collection, returns values from the collection that equal the right operand, otherwise returns TRUE if the left operand equals the right operand. + 等于 - 区分大小写。如果左操作数为集合，则返回该集合中等于右操作数的值；否则，如果左操作数等于右操作数，则返回 TRUE。 - Not equal to - case insensitive. When the left operand is a collection, returns values from the collection that do not equal the right operand, otherwise returns TRUE if the left operand does not equal the right operand. + 不等于 - 不区分大小写。当左操作数为集合时，返回该集合中与右操作数不相等的值；否则，如果左操作数与右操作数不相等，则返回 TRUE。 - Not equal to - case insensitive. When the left operand is a collection, returns values from the collection that do not equal the right operand, otherwise returns TRUE if the left operand does not equal the right operand. + 不等于 - 不区分大小写。当左操作数为集合时，返回该集合中与右操作数不相等的值；否则，如果左操作数与右操作数不相等，则返回 TRUE。 - Not equal to - case sensitive. When the left operand is a collection, returns values from the collection that do not equal the right operand, otherwise returns TRUE if the left operand does not equal the right operand. + 不等于 - 区分大小写。当左操作数为集合时，返回该集合中与右操作数不相等的值；否则，如果左操作数与右操作数不相等，则返回 TRUE。 - Greater than or equal to - case insensitive. When the left operand is a collection, returns values from the collection that are greater than or equal to the right operand, otherwise returns TRUE if the left operand is greater than or equal to the right operand. + 大于或等于 = 不区分大小写。如果左操作数为集合，则返回该集合中大于或等于右操作数的值；否则，如果左操作数大于或等于右操作数，则返回 TRUE。 - Greater than or equal to - case insensitive. When the left operand is a collection, returns values from the collection that are greater than or equal to the right operand, otherwise returns TRUE if the left operand is greater than or equal to the right operand. + 大于或等于 = 不区分大小写。如果左操作数为集合，则返回该集合中大于或等于右操作数的值；否则，如果左操作数大于或等于右操作数，则返回 TRUE。 - Greater than or equal to - case sensitive. When the left operand is a collection, returns values from the collection that are greater than or equal to the right operand, otherwise returns TRUE if the left operand is greater than or equal to the right operand. + 大于或等于 - 区分大小写。如果左操作数为集合，则返回该集合中大于或等于右操作数的值；否则，如果左操作数大于或等于右操作数，则返回 TRUE。 - Greater than - case insensitive. When the left operand is a collection, returns values from the collection that are greater than the right operand, otherwise returns TRUE if the left operand is greater than the right operand. + 大于 - 不区分大小写。如果左操作数为集合，则返回该集合中大于右操作数的值；否则，如果左操作数大于右操作数，则返回 TRUE。 - Greater than - case insensitive. When the left operand is a collection, returns values from the collection that are greater than the right operand, otherwise returns TRUE if the left operand is greater than the right operand. + 大于 - 不区分大小写。如果左操作数为集合，则返回该集合中大于右操作数的值；否则，如果左操作数大于右操作数，则返回 TRUE。 - Greater than - case sensitive. When the left operand is a collection, returns values from the collection that are greater than the right operand, otherwise returns TRUE if the left operand is greater than the right operand. + 大于 - 区分大小写。如果左操作数为集合，则返回该集合中大于右操作数的值；否则，如果左操作数大于右操作数，则返回 TRUE。 - Less than - case insensitive. When the left operand is a collection, returns values from the collection that are less than the right operand, otherwise returns TRUE if the left operand is less than the right operand. + 小于 - 不区分大小写。如果左操作数为集合，则返回该集合中小于右操作数的值；否则，如果左操作数小于右操作数，则返回 TRUE。 - Less than - case insensitive. When the left operand is a collection, returns values from the collection that are less than the right operand, otherwise returns TRUE if the left operand is less than the right operand. + 小于 - 不区分大小写。如果左操作数为集合，则返回该集合中小于右操作数的值；否则，如果左操作数小于右操作数，则返回 TRUE。 - Less than - case sensitive. When the left operand is a collection, returns values from the collection that are less than the right operand, otherwise returns TRUE if the left operand is less than the right operand. + 小于 - 区分大小写。如果左操作数为集合，则返回该集合中小于右操作数的值；否则，如果左操作数小于右操作数，则返回 TRUE。 - Less than or equal to - case insensitive. When the left operand is a collection, returns values from the collection that are less than or equal to the right operand, otherwise returns TRUE if the left operand is less than or equal to the right operand. + 小于或等于 - 不区分大小写。如果左操作数为集合，则返回该集合中小于或等于右操作数的值；否则，如果左操作数小于或等于右操作数，则返回 TRUE。 - Less than or equal to - case insensitive. When the left operand is a collection, returns values from the collection that are less than or equal to the right operand, otherwise returns TRUE if the left operand is less than or equal to the right operand. + 小于或等于 - 不区分大小写。如果左操作数为集合，则返回该集合中小于或等于右操作数的值；否则，如果左操作数小于或等于右操作数，则返回 TRUE。 - Less than or equal to - case sensitive. When the left operand is a collection, returns values from the collection that are less than or equal to the right operand, otherwise returns TRUE if the left operand is less than or equal to the right operand. + 小于或等于 - 区分大小写。如果左操作数为集合，则返回该集合中小于或等于右操作数的值；否则，如果左操作数小于或等于右操作数，则返回 TRUE。 - Wildcard matching operator - case insensitive. When the left operand is a collection, returns values from the collection that match the right hand operand, otherwise returns TRUE if the left operand matches the right operand. + 通配符匹配运算符 - 不区分大小写。当左操作数为集合时，返回该集合中与右操作数匹配的值；否则，如果左操作数与右操作数匹配，则返回 TRUE。 - Wildcard matching operator - case insensitive. When the left operand is a collection, returns values from the collection that match the right hand operand, otherwise returns TRUE if the left operand matches the right operand. + 通配符匹配运算符 - 不区分大小写。当左操作数为集合时，返回该集合中与右操作数匹配的值；否则，如果左操作数与右操作数匹配，则返回 TRUE。 - Wildcard matching operator - case sensitive. When the left operand is a collection, returns values from the collection that match the right hand operand, otherwise returns TRUE if the left operand matches the right operand. + 通配符匹配运算符 - 区分大小写。当左操作数为集合时，返回该集合中与右操作数匹配的值；否则，如果左操作数与右操作数匹配，则返回 TRUE。 - Wildcard matching operator - case insensitive. When the left operand is a collection, returns values from the collection that do not match the right hand operand, otherwise returns TRUE if the left operand does not match the right operand. + 通配符匹配运算符 - 不区分大小写。当左操作数为集合时，返回该集合中与右操作数不匹配的值；否则，如果左操作数与右操作数不匹配，则返回 TRUE。 - Wildcard matching operator - case insensitive. When the left operand is a collection, returns values from the collection that do not match the right hand operand, otherwise returns TRUE if the left operand does not match the right operand. + 通配符匹配运算符 - 不区分大小写。当左操作数为集合时，返回该集合中与右操作数不匹配的值；否则，如果左操作数与右操作数不匹配，则返回 TRUE。 - Wildcard matching operator - case sensitive. When the left operand is a collection, returns values from the collection that do not match the right hand operand, otherwise returns TRUE if the left operand does not match the right operand. + 通配符匹配运算符 - 区分大小写。当左操作数为集合时，返回该集合中与右操作数不匹配的值；否则，如果左操作数与右操作数不匹配，则返回 TRUE。 - Regular expression matching operator - case insensitive. When the left operand is a collection, returns values from the collection that match the right hand operand, otherwise returns TRUE if the left operand matches the right operand. + 正则表达式与运算符匹配 - 不区分大小写。当左操作数为集合时，返回该集合中与右操作数匹配的值；否则，如果左操作数与右操作数匹配，则返回 TRUE。 - Regular expression matching operator - case insensitive. When the left operand is a collection, returns values from the collection that match the right hand operand, otherwise returns TRUE if the left operand matches the right operand. + 正则表达式与运算符匹配 - 不区分大小写。当左操作数为集合时，返回该集合中与右操作数匹配的值；否则，如果左操作数与右操作数匹配，则返回 TRUE。 - Regular expression matching operator - case sensitive. When the left operand is a collection, returns values from the collection that match the right hand operand, otherwise returns TRUE if the left operand matches the right operand. + 正则表达式与运算符匹配 - 区分大小写。当左操作数为集合时，返回该集合中与右操作数匹配的值；否则，如果左操作数与右操作数匹配，则返回 TRUE。 - Regular expression matching operator - case insensitive. When the left operand is a collection, returns values from the collection that do not match the right hand operand, otherwise returns TRUE if the left operand does not match the right operand. + 正则表达式与运算符匹配 - 不区分大小写。当左操作数为集合时，返回该集合中与右操作数不匹配的值；否则，如果左操作数与右操作数不匹配，则返回 TRUE。 - Regular expression matching operator - case insensitive. When the left operand is a collection, returns values from the collection that do not match the right hand operand, otherwise returns TRUE if the left operand does not match the right operand. + 正则表达式与运算符匹配 - 不区分大小写。当左操作数为集合时，返回该集合中与右操作数不匹配的值；否则，如果左操作数与右操作数不匹配，则返回 TRUE。 - Regular expression matching operator - case sensitive. When the left operand is a collection, returns values from the collection that do not match the right hand operand, otherwise returns TRUE if the left operand does not match the right operand. + 正则表达式与运算符匹配 - 区分大小写。当左操作数为集合时，返回该集合中与右操作数不匹配的值；否则，如果左操作数与右操作数不匹配，则返回 TRUE。 - Replace operator - case insensitive. Changes the left operand. Example: (dir *.ps1).FullName -replace '.ps1$','.ps1.bak' + REPLACE 运算符 - 不区分大小写。更改左操作数。示例: (dir *.ps1).FullName -replace '.ps1$','.ps1.bak' - Replace operator - case insensitive. Changes the left operand. Example: (dir *.ps1).FullName -replace '.ps1$','.ps1.bak' + REPLACE 运算符 - 不区分大小写。更改左操作数。示例: (dir *.ps1).FullName -replace '.ps1$','.ps1.bak' - Replace operator - case sensitive. Changes the left operand. Example: (dir *.ps1).FullName -replace '.ps1$','.ps1.bak' + REPLACE 运算符 - 区分大小写。更改左操作数。示例: (dir *.ps1).FullName -replace '.ps1$','.ps1.bak' - Containment operator - case insensitive. Returns TRUE when the test value (right operand) exactly matches at least one of the values in the left operand. + 包含运算符 - 不区分大小写。当测试值(右操作数)与左操作数中的至少一个值完全匹配时，返回 TRUE。 - Containment operator - case insensitive. Returns TRUE when the test value (right operand) exactly matches at least one of the values in the left operand. + 包含运算符 - 不区分大小写。当测试值(右操作数)与左操作数中的至少一个值完全匹配时，返回 TRUE。 - Containment operator - case sensitive. Returns TRUE only when the test value (right operand) exactly matches at least one of the values in the left operand. + 包含运算符 - 区分大小写。仅当测试值(右操作数)与左操作数中的至少一个值完全匹配时，返回 TRUE。 - Containment operator - case insensitive. Returns TRUE when the test value (right operand) exactly matches none of the values in the left operand. + 包含运算符 - 不区分大小写。当测试值(右操作数)与左操作数中的所有值都无法完全匹配时，返回 TRUE。 - Containment operator - case insensitive. Returns TRUE when the test value (right operand) exactly matches none of the values in the left operand. + 包含运算符 - 不区分大小写。当测试值(右操作数)与左操作数中的所有值都无法完全匹配时，返回 TRUE。 - Containment operator - case sensitive. Returns TRUE when the test value (right operand) exactly matches none of the values in the left operand. + 包含运算符 - 区分大小写。当测试值(右操作数)与左操作数中的所有值都无法完全匹配时，返回 TRUE。 - Containment operator - case insensitive. Returns TRUE when the test value (left operand) exactly matches at least one of the values in the right operand. + 包含运算符 - 不区分大小写。当测试值(左操作数)与右操作数中的至少一个值完全匹配时，返回 TRUE。 - Containment operator - case insensitive. Returns TRUE when the test value (left operand) exactly matches at least one of the values in the right operand. + 包含运算符 - 不区分大小写。当测试值(左操作数)与右操作数中的至少一个值完全匹配时，返回 TRUE。 - Containment operator - case sensitive. Returns TRUE when the test value (left operand) exactly matches at least one of the values in the right operand. + 包含运算符 - 区分大小写。当测试值(左操作数)与右操作数中的至少一个值完全匹配时，返回 TRUE。 - Containment operator - case sensitive. Returns TRUE when the test value (left operand) exactly matches none of the values in the right operand. + 包含运算符 - 区分大小写。当测试值(左操作数)与右操作数中的所有值都无法完全匹配时，返回 TRUE。 - Containment operator - case insensitive. Returns TRUE when the test value (left operand) exactly matches none of the values in the right operand. + 包含运算符 - 不区分大小写。当测试值(左操作数)与右操作数中的所有值都无法完全匹配时，返回 TRUE。 - Containment operator - case sensitive. Returns TRUE when the test value (left operand) exactly matches none of the values in the right operand. + 包含运算符 - 区分大小写。当测试值(左操作数)与右操作数中的所有值都无法完全匹配时，返回 TRUE。 - Split - case insensitive. Split one or more strings into substrings. + 拆分 - 不区分大小写。将一个或多个字符串拆分为子字符串。 -Split <String> <String> -Split <Delimiter>[,<Max-substrings>[,"<Options>"]] @@ -273,7 +273,7 @@ <String> -Split {<ScriptBlock>} [,<Max-substrings>] - Split - case insensitive. Split one or more strings into substrings. + 拆分 - 不区分大小写。将一个或多个字符串拆分为子字符串。 -Split <String> <String> -Split <Delimiter>[,<Max-substrings>[,"<Options>"]] @@ -281,7 +281,7 @@ <String> -Split {<ScriptBlock>} [,<Max-substrings>] - Split - case sensitive. Split one or more strings into substrings. + 拆分 - 区分大小写。将一个或多个字符串拆分为子字符串。 -Split <String> <String> -Split <Delimiter>[,<Max-substrings>[,"<Options>"]] @@ -289,103 +289,103 @@ <String> -Split {<ScriptBlock>} [,<Max-substrings>] - Returns TRUE when the left operand is not an instance of the specified .NET Framework type (right operand). + 当左操作数不是指定 .NET Framework 类型(右操作数)的实例时，返回 TRUE。 - Returns TRUE when the left operand is an instance of the specified .NET Framework type (right operand). + 当左操作数是指定 .NET Framework 类型(右操作数)的实例时，返回 TRUE。 - Converts the left operand to the specified .NET Framework type (right operand). + 将左操作数转换为指定的 .NET Framework 类型(右操作数)。 - Formats strings by using the format method of string objects. + 使用字符串对象的格式方法设置字符串的格式。 - Logical and. Returns TRUE when both statements are TRUE. + 逻辑 AND。当两个语句均为 TRUE 时返回 TRUE。 - Bitwise AND + 按位 AND - Logical or. TRUE when either or both statements are TRUE. + 逻辑 OR。当任一语句或两者都为 TRUE 时，返回 TRUE。 - Bitwise OR (inclusive) + 按位 OR (包含) - Logical exclusive or. Returns TRUE when one of the statements is TRUE and the other is FALSE. + 逻辑异或。当一个语句为 TRUE、另一个语句为 FALSE 时，返回 TRUE。 - Bitwise OR (exclusive) + 按位 OR (排除) - Join - combine multiple strings into a single string. --Join <String[]> -<String[]> -Join <Delimiter> + 联接 - 将多个字符串组合成一个字符串。 +-加入 <String[]> +<String[]> -加入 <Delimiter> - Shift Left bit operator. Inserts zero in right-most bit position. + 左移位运算符。在最右侧的位的位置插入零。 - Shift Right bit operator. Inserts zero in the left-most bit position. For signed values, sign bit is preserved. + 右移位运算符。在最左侧的位的位置插入零。对于有符号的值，会保留符号位。 [string] -Specifies the name of the property being created. +指定正在创建的属性的名称。 [string] -Specifies the name of the property being created. +指定正在创建的属性的名称。 [scriptblock] -A script block used to calculate the value of the new property. +用于计算新属性的值的脚本块。 [string] -Define how the values are displayed in a column. -Valid values are 'left', 'center', or 'right'. +定义值在列中的显示方式。 +有效值为 "left"、"center" 或 "right"。 [string] -Specifies a format string that defines how the value is formatted for output. +指定一个格式字符串，用于定义如何为输出设置值的格式。 [int] -Specifies the maximum column width in a table when the value is displayed. -The value must be greater than 0. +指定在显示值时表的最大宽度列。 +值必须大于 0。 [int] -The depth key specifies the depth of expansion per property. +深度键指定每个属性的展开深度。 [bool] -Specifies the order of sorting for one or more properties. +指定一个或多个属性的排序顺序。 [bool] -Specifies the order of sorting for one or more properties. +指定一个或多个属性的排序顺序。 [String[]] -Specifies the log names to get events from. -Supports wildcards. +指定要从中获取事件的日志名称。 +支持通配符。 [String[]] -Specifies the event log providers to get events from. -Supports wildcards. +指定要从中获取事件的事件日志提供程序。 +支持通配符。 [String[]] -Specifies file paths to log files to get events from. -Valid file formats are: .etl, .evt, and .evtx +指定要从中获取事件的日志文件路径。 +有效的文件格式为: .etl、.evt 和 .evtx [Long[]] -Selects events with the specified keyword bitmasks. -The following are standard keywords: +选择具有指定关键字位掩码的事件。 +以下是标准关键字: 4503599627370496: AuditFailure 9007199254740992: AuditSuccess 4503599627370496: CorrelationHint @@ -398,213 +398,213 @@ The following are standard keywords: [int[]] -Selects events with the specified event IDs. +选择具有指定事件 ID 的事件。 [int[]] -Selects events with the specified log levels. -The following log levels are valid: -1: Critical -2: Error -3: Warning -4: Informational -5: Verbose +选择具有指定日志级别的事件。 +支持以下日志级别: +1: 严重 +2: 错误 +3: 警告 +4: 信息性 +5: 详细信息 [datetime] -Selects events created after the specified date and time. +选择在指定日期和时间之后创建的事件。 [datetime] -Selects events created before the specified date and time. +选择在指定日期和时间之前创建的事件。 [string] -Selects events generated by the specified user. -This can either be a string representation of a SID or a domain and username in the format DOMAIN\USERNAME or USERNAME@DOMAIN +选择由指定用户生成的事件。 +这可以是 SID 的字符串表示形式，也可以是采用 DOMAIN\USERNAME 或 USERNAME@DOMAIN 格式的域和用户名 [string[]] -Selects events with any of the specified values in the EventData section. +选择 EventData 部分中包含任意指定值的事件。 [hashtable] -Excludes events that match the values specified in the hashtable. +排除与哈希表中指定值匹配的事件。 - [string] or [hashtable] -Specifies an array of PowerShell modules that the script requires. -Each element can either be a string with the module name as value or a hashtable with the following keys: -Name: Name of the module -GUID: GUID of the module -One of the following: -ModuleVersion: Specifies a minimum acceptable version of the module. -RequiredVersion: Specifies an exact, required version of the module. -MaximumVersion: Specifies the maximum acceptable version of the module. + [string] 或 [hashtable] +指定脚本所需的 PowerShell 模块的数组。 +每个元素都可以是一个字符串，其值为模块名称，也可以是一个具有以下键的哈希表: +名称: 模块的名称 +GUID: 模块的 GUID +下列之一: +ModuleVersion: 指定模块的最低可接受版本。 +RequiredVersion: 指定所需的准确的模块版本。 +MaximumVersion: 指定模块的最高可接受版本。 [string] -Specifies a PowerShell edition that the script requires. -Valid values are "Core" and "Desktop" +指定脚本所需的 PowerShell 版本。 +有效值为 "Core" 和 "Desktop" [switch] -Specifies that PowerShell must be running as administrator on Windows. -This must be the last parameter on the #requires statement line. +指定 PowerShell 必须在 Windows 上以管理员身份运行。 +这必须是 #requires 语句行中的最后一个参数。 [version] -Specifies the minimum version of PowerShell that the script requires. +指定脚本所需的最低 PowerShell 版本。 - Specifies that the script requires PowerShell 7+ to run. + 指定脚本需要 PowerShell 7+ 才能运行。 - Specifies that the script requires Windows PowerShell 5.1 to run. + 指定脚本需要 Windows PowerShell 5.1 才能运行。 [string] -Required. Specifies the module name. +必需。指定模块名称。 [string] -Optional. Specifies the GUID of the module. +可选。指定模块的 GUID。 [string] -Specifies a minimum acceptable version of the module. +指定模块的最低可接受版本。 [string] -Specifies an exact, required version of the module. +指定模块所需的准确版本。 [string] -Specifies the maximum acceptable version of the module. +指定模块的最高可接受版本。 - A brief description of the function or script. -This keyword can be used only once in each topic. + 函数或脚本的简要说明。 +此关键字在每个主题中只能使用一次。 - A detailed description of the function or script. -This keyword can be used only once in each topic. + 函数或脚本的详细说明。 +此关键字在每个主题中只能使用一次。 .PARAMETER <Parameter-Name> -The description of a parameter. -Add a .PARAMETER keyword for each parameter in the function or script syntax. +参数的说明。 +为函数或脚本语法中的每个参数添加 .PARAMETER 关键字。 - A sample command that uses the function or script, optionally followed by sample output and a description. -Repeat this keyword for each example. + 使用函数或脚本的示例命令，可选择在后面添加示例输出和说明。 +为每个示例重复此关键字。 - The .NET types of objects that can be piped to the function or script. -You can also include a description of the input objects. + 可传递给函数或脚本的 .NET 类型的对象。 +你还可以添加输入对象的说明。 - The .NET type of the objects that the cmdlet returns. -You can also include a description of the returned objects. + Cmdlet 返回的对象的 .NET 类型。 +你还可以添加返回对象的说明。 - Additional information about the function or script. + 有关函数或脚本的其他信息。 - The name of a related topic. -Repeat the .LINK keyword for each related topic. -The .Link keyword content can also include a URI to an online version of the same help topic. + 相关主题的名称。 +对每个相关主题重复关键字 .LINK。 +.Link 关键字内容还可以包含指向同一帮助主题的联机版本的 URI。 - The name of the technology or feature that the function or script uses, or to which it is related. + 函数或脚本使用的或与之相关的技术或功能的名称。 - The name of the user role for the help topic. + 帮助主题的用户角色的名称。 - The keywords that describe the intended use of the function. + 描述函数预期用途的关键字。 .FORWARDHELPTARGETNAME <Command-Name> -Redirects to the help topic for the specified command. +重定向到指定命令的帮助主题。 .FORWARDHELPCATEGORY <Category> -Specifies the help category of the item in .ForwardHelpTargetName +指定 .ForwardHelpTargetName 中的项的帮助类别 .REMOTEHELPRUNSPACE <PSSession-variable> -Specifies a session that contains the help topic. -Enter a variable that contains a PSSession object. +指定包含帮助主题的会话。 +输入包含 PSSession 对象的变量。 .EXTERNALHELP <XML Help File> -The .ExternalHelp keyword is required when a function or script is documented in XML files. +在 XML 文件中记录函数或脚本时，需要关键字 .ExternalHelp。 - Specifies the path to a .NET assembly to load. + 指定要加载的 .NET 程序集的路径。 using assembly <.NET-assembly-path> - Specifies a PowerShell module to load classes from. + 指定要从中加载类的 PowerShell 模块。 using module <ModuleName or Path> using module <ModuleSpecification hashtable> - Specifies a .NET namespace to resolve types from or a namespace alias. + 指定要从中解析类型的 .NET 命名空间或命名空间别名。 using namespace <.NET-namespace> using namespace <AliasName> = <.NET-namespace> - Specifies an alias for a .NET Type. + 指定 .NET 类型的别名。 using type <AliasName> = <.NET-type> - A normal string. + 普通字符串。 - A string that contains unexpanded references to environment variables that are expanded when the value is retrieved. + 字符串包含对检索值时扩展的环境变量的未扩展引用。 - Binary data in any form. + 任何形式的二进制数据。 - A 32-bit binary number. + 32 位二进制数。 - An array of strings. + 字符串数组。 - A 64-bit binary number. + 64 位二进制数。 - An unsupported registry data type. + 不支持的注册表数据类型。 - ',' - Comma + ","- 逗号 - ', ' - Comma-Space + "," - 逗号-空格 - ';' - Semi-Colon + ";" - 分号 - '; ' - Semi-Colon-Space + "; " - 分号-空格 - {0} - Newline + {0} - 换行符 - '-' - Dash + "-": 短划线 - ' ' - Space + " ": 空格 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/zh-Hans/VerbDescriptionStrings.zh-Hans.resx b/src/System.Management.Automation/resources/zh-Hans/VerbDescriptionStrings.zh-Hans.resx index 175483ed225..05befafb28c 100644 --- a/src/System.Management.Automation/resources/zh-Hans/VerbDescriptionStrings.zh-Hans.resx +++ b/src/System.Management.Automation/resources/zh-Hans/VerbDescriptionStrings.zh-Hans.resx @@ -118,303 +118,303 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Adds a resource to a container, or attaches an item to another item + 将资源添加到容器，或将某一项附加到另一个项 - Confirms or agrees to the status of a resource or process + 确认或同意资源或进程的状态 - Affirms the state of a resource + 确认资源的状态 - Stores data by replicating it + 通过复制数据来存储数据 - Restricts access to a resource + 限制对资源的访问 - Creates an artifact (usually a binary or document) out of some set of input files (usually source code or declarative documents) + 根据某一组输入文件(通常是源代码或声明性文件)创建项目(通常是二进制文件或文档) - Creates a snapshot of the current state of the data or of its configuration + 创建数据当前状态的快照或数据配置的快照 - Removes all the resources from a container but does not delete the container + 从容器中删除所有资源，但不删除容器 - Changes the state of a resource to make it inaccessible, unavailable, or unusable + 更改资源的状态，使其不可访问、不适用或不可用 - Evaluates the data from one resource against the data from another resource + 根据某一资源中的数据评估另一资源中的数据 - Concludes an operation + 结束操作 - Compacts the data of a resource + 压缩资源的数据 - Acknowledges, verifies, or validates the state of a resource or process + 确认、证实或验证资源或进程的状态 - Creates a link between a source and a destination + 在源和目标之间创建链接 - Changes the data from one representation to another when the cmdlet supports bidirectional conversion or when the cmdlet supports conversion between multiple data types + Cmdlet 支持双向转换或支持多种数据类型之间的转换时，将数据从一种表示形式更改为另一种表示形式 - Converts one primary type of input (the cmdlet noun indicates the input) to one or more supported output types + 将一种主要的输入类型(cmdlet 名词表示输入)转换为一种或多种受支持的输出类型 - Converts from one or more types of input to a primary output type (the cmdlet noun indicates the output type) + 从一种或多种类型的输入转换为主要的输出类型(cmdlet 名词表示输出类型) - Copies a resource to another name or to another container + 将资源复制到另一个名称或另一个容器 - Examines a resource to diagnose operational problems + 检查资源以诊断操作问题 - Refuses, objects, blocks, or opposes the state of a resource or process + 拒绝、反对、阻止或抵制资源或进程的状态 - Sends an application, website, or solution to a remote target[s] in such a way that a consumer of that solution can access it after deployment is complete + 将应用程序、网站或解决方案发送到远程目标，以便解决方案的使用者可以在部署完成后对其进行访问 - Configures a resource to an unavailable or inactive state + 将资源配置为不可用或非活动状态 - Breaks the link between a source and a destination + 断开源和目标之间的链接 - Detaches a named entity from a location + 从相应位置拆离命名实体 - Modifies existing data by adding or removing content + 通过添加或删除内容来修改现有数据 - Configures a resource to an available or active state + 将资源配置为可用或活动状态 - Specifies an action that allows the user to move into a resource + 指定可让用户移动到资源中的操作 - Sets the current environment or context to the most recently used context + 将当前环境或上下文设置为最近使用的上下文 - Restores the data of a resource that has been compressed to its original state + 将已压缩的资源的数据还原到其初始状态 - Encapsulates the primary input into a persistent data store, such as a file, or into an interchange format + 将主要输入封装到永久性数据存储(例如文件)，或封装为交换格式 - Looks for an object in a container that is unknown, implied, optional, or specified + 在容器中查找未知、隐含、可选或指定的对象 - Arranges objects in a specified form or layout + 以指定的形式或布局排列对象 - Specifies an action that retrieves a resource + 指定可检索资源的操作 - Allows access to a resource + 允许对资源的访问 - Arranges or associates one or more resources + 排列或关联一种或多种资源 - Makes a resource undetectable + 使资源不可检测 - Creates a resource from data that is stored in a persistent data store (such as a file) or in an interchange format + 使用永久性数据存储(例如文件)中存储的或以交换格式存储的数据创建资源 - Prepares a resource for use, and sets it to a default state + 准备要使用的资源，并将其设置为默认状态 - Places a resource in a location, and optionally initializes it + 将资源置于某个位置，并根据需要对其进行初始化 - Performs an action, such as running a command or a method + 执行操作，例如运行命令或方法 - Combines resources into one resource + 将多种资源合并为一种 - Applies constraints to a resource + 对资源应用约束 - Secures a resource + 保护资源 - Identifies resources that are consumed by a specified operation, or retrieves statistics about a resource + 识别指定操作使用的资源，或检索关于资源的统计信息 - Creates a single resource from multiple resources + 根据多个资源创建一个资源 - Attaches a named entity to a location + 将命名实体附加到某一位置 - Moves a resource from one location to another + 将资源从一个位置移动到另一个位置 - Creates a resource + 创建资源 - Changes the state of a resource to make it accessible, available, or usable + 更改资源的状态，使其可访问、适用或可用 - Increases the effectiveness of a resource + 提高资源的有效性 - Sends data out of the environment + 将数据发送到环境之外 - Use the Test verb + 使用 Test 谓词 - Removes an item from the top of a stack + 从堆栈顶部删除某一项 - Safeguards a resource from attack or loss + 保护资源，以免受攻击或损失 - Makes a resource available to others + 使资源可供他人使用 - Adds an item to the top of a stack + 将项添加到堆栈顶部 - Acquires information from a source + 从源获取信息 - Accepts information sent from a source + 接受从源发送的信息 - Resets a resource to the state that was undone + 将资源重置为撤消的状态 - Creates an entry for a resource in a repository such as a database + 为存储库(例如数据库)中的资源创建一个条目 - Deletes a resource from a container + 从容器中删除资源 - Changes the name of a resource + 更改资源的名称 - Restores a resource to a usable condition + 将资源还原为可用状态 - Asks for a resource or asks for permissions + 请求提供资源或请求权限 - Sets a resource back to its original state + 将资源设置回其初始状态 - Changes the size of a resource + 更改资源大小 - Maps a shorthand representation of a resource to a more complete representation + 将资源的简写表示映射为更完整的表示形式 - Stops an operation and then starts it again + 停止操作，然后再次启动 - Sets a resource to a predefined state, such as a state set by Checkpoint + 将资源设置为预定义状态，例如 Checkpoint 设置的状态 - Starts an operation that has been suspended + 启动已挂起的操作 - Specifies an action that does not allow access to a resource + 指定不允许访问资源的操作 - Preserves data to avoid loss + 保留数据以免丢失 - Creates a reference to a resource in a container + 创建对容器中资源的引用 - Locates a resource in a container + 查找容器中的资源 - Delivers information to a destination + 将信息传递到目标 - Replaces data on an existing resource or creates a resource that contains some data + 替换现有资源上的数据或创建包含某些数据的资源 - Makes a resource visible to the user + 使资源对用户可见 - Assures that two or more resources are in the same state + 确保两种及以上的资源处于相同状态 - Bypasses one or more resources or points in a sequence + 绕过序列中的一个或多个资源或点 - Separates parts of a resource + 分离资源的各个部分 - Initiates an operation + 启动操作 - Moves to the next point or resource in a sequence + 移动到序列中的下一个点或资源 - Discontinues an activity + 停止活动 - Presents a resource for approval + 提交资源以供审批 - Pauses an activity + 暂停活动 - Specifies an action that alternates between two resources, such as to change between two locations, responsibilities, or states + 指定在两种资源之间切换的操作，例如在两个位置、职责或状态之间进行切换 - Verifies the operation or consistency of a resource + 验证资源的操作或一致性 - Tracks the activities of a resource + 跟踪资源的活动 - Removes restrictions to a resource + 删除对资源的限制 - Sets a resource to its previous state + 将资源设置为其以前的状态 - Removes a resource from an indicated location + 从指示的位置删除资源 - Releases a resource that was locked + 释放锁定的资源 - Removes safeguards from a resource that were added to prevent it from attack or loss + 从资源中删除为免受攻击或损失而添加的保护措施 - Makes a resource unavailable to others + 使资源不可供他人使用 - Removes the entry for a resource from a repository + 从存储库中删除资源的条目 - Brings a resource up-to-date to maintain its state, accuracy, conformance, or compliance + 将资源更新为最新内容，以保持其状态、准确性、一致性或合规性 - Uses or includes a resource to do something + 使用或添加资源以执行某些操作 - Pauses an operation until a specified event occurs + 暂停操作，直到指定的事件发生 - Continually inspects or monitors a resource for changes + 持续检查或监视资源是否发生更改 - Adds information to a target + 向目标添加信息 \ No newline at end of file diff --git a/src/System.Management.Automation/resources/zh-Hant/SessionStateProviderBaseStrings.zh-Hant.resx b/src/System.Management.Automation/resources/zh-Hant/SessionStateProviderBaseStrings.zh-Hant.resx index f42f935cec9..62ce58492ef 100644 --- a/src/System.Management.Automation/resources/zh-Hant/SessionStateProviderBaseStrings.zh-Hant.resx +++ b/src/System.Management.Automation/resources/zh-Hant/SessionStateProviderBaseStrings.zh-Hant.resx @@ -118,39 +118,39 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Set Item + 設定項目 - Item: {0} Value: {1} + 項目: {0} 值: {1} - Clear Item + 清除項目 - Item: {0} + 項目: {0} - Remove Item + 移除項目 - Item: {0} + 項目: {0} - New Item + 新增項目 - Item: {0} Type: {1} Value: {2} + 項目: {0} 類型: {1} 值: {2} - Copy Item + 複製項目 - Item: {0} Destination: {1} + 項目: {0} 目的地: {1} - Rename Item + 重新命名項目 - Item: {0} NewName: {1} + 項目: {0} NewName: {1} \ No newline at end of file diff --git a/src/System.Management.Automation/resources/zh-Hant/VerbDescriptionStrings.zh-Hant.resx b/src/System.Management.Automation/resources/zh-Hant/VerbDescriptionStrings.zh-Hant.resx index 175483ed225..3f99dbf91c2 100644 --- a/src/System.Management.Automation/resources/zh-Hant/VerbDescriptionStrings.zh-Hant.resx +++ b/src/System.Management.Automation/resources/zh-Hant/VerbDescriptionStrings.zh-Hant.resx @@ -118,303 +118,303 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Adds a resource to a container, or attaches an item to another item + 將資源新增至容器，或將項目連結至另一個項目 - Confirms or agrees to the status of a resource or process + 確認或同意資源或程序的狀態 - Affirms the state of a resource + 確認資源的狀態 - Stores data by replicating it + 透過複寫它來儲存資料 - Restricts access to a resource + 限制存取資源 - Creates an artifact (usually a binary or document) out of some set of input files (usually source code or declarative documents) + 從一組輸入檔案 (通常是原始程式碼或宣告式文件) 建立成品 (通常是二進位檔或文件) - Creates a snapshot of the current state of the data or of its configuration + 建立資料目前狀態的快照集，或其設定目前狀態的快照集 - Removes all the resources from a container but does not delete the container + 從容器移除所有資源，但不刪除容器 - Changes the state of a resource to make it inaccessible, unavailable, or unusable + 變更資源的狀態，使其無法存取、無法提供或無法使用 - Evaluates the data from one resource against the data from another resource + 比較一個資源的資料與另一個資源的資料 - Concludes an operation + 結束作業 - Compacts the data of a resource + 壓縮資源的資料 - Acknowledges, verifies, or validates the state of a resource or process + 認可、確認或驗證資源或處理序的狀態 - Creates a link between a source and a destination + 建立來源與目的地之間的連結 - Changes the data from one representation to another when the cmdlet supports bidirectional conversion or when the cmdlet supports conversion between multiple data types + 當 Cmdlet 支援雙向轉換，或當 Cmdlet 支援多個資料類型之間的轉換時，會將資料從一個表示法變更為另一個 - Converts one primary type of input (the cmdlet noun indicates the input) to one or more supported output types + 將一個主要輸入類型 (Cmdlet 名詞表示輸入) 轉換成一或多個支援的輸出類型 - Converts from one or more types of input to a primary output type (the cmdlet noun indicates the output type) + 從一或多個輸入類型轉換成主要輸出類型 (Cmdlet 名詞表示輸出類型) - Copies a resource to another name or to another container + 將資源複製到另一個名稱或另一個容器 - Examines a resource to diagnose operational problems + 檢查資源以診斷操作問題 - Refuses, objects, blocks, or opposes the state of a resource or process + 拒絕、反對、封鎖或抵制資源或處理序的狀態 - Sends an application, website, or solution to a remote target[s] in such a way that a consumer of that solution can access it after deployment is complete + 將應用程式、網站或解決方案傳送至遠端目標，讓該解決方案的取用者能夠在部署完成之後加以存取 - Configures a resource to an unavailable or inactive state + 將資源設定為無法使用或非作用中狀態 - Breaks the link between a source and a destination + 中斷來源與目的地之間的連結 - Detaches a named entity from a location + 從位置中斷已命名實體的連線 - Modifies existing data by adding or removing content + 透過新增或移除內容來修改現有資料 - Configures a resource to an available or active state + 將資源設定為可供使用或作用中狀態 - Specifies an action that allows the user to move into a resource + 指定允許使用者進入資源的動作 - Sets the current environment or context to the most recently used context + 將目前環境或內容設定為最近使用的內容 - Restores the data of a resource that has been compressed to its original state + 還原已壓縮至其原始狀態的資源其資料 - Encapsulates the primary input into a persistent data store, such as a file, or into an interchange format + 將主要輸入封裝至永久性資料存放區，例如檔案或交換格式 - Looks for an object in a container that is unknown, implied, optional, or specified + 在容器中尋找未知、隱含、選擇性或指定的物件 - Arranges objects in a specified form or layout + 以指定的表單或版面配置來排列物件 - Specifies an action that retrieves a resource + 指定擷取資源的動作 - Allows access to a resource + 允許存取資源 - Arranges or associates one or more resources + 排列一或多個資源，或將一或多個資源建立關聯 - Makes a resource undetectable + 使資源無法偵測 - Creates a resource from data that is stored in a persistent data store (such as a file) or in an interchange format + 從儲存在永久性資料存放區 (例如檔案) 或交換格式中的資料建立資源 - Prepares a resource for use, and sets it to a default state + 準備要使用的資源，並將其設定為預設狀態 - Places a resource in a location, and optionally initializes it + 將資源放置到位置中，並選用性地初始化它 - Performs an action, such as running a command or a method + 執行動作，例如執行命令或方法 - Combines resources into one resource + 將多個資源合併成一個資源 - Applies constraints to a resource + 將條件約束套用至資源 - Secures a resource + 保護資源 - Identifies resources that are consumed by a specified operation, or retrieves statistics about a resource + 識別指定作業所取用的資源，或擷取資源的有關統計資料 - Creates a single resource from multiple resources + 從多個資源建立單一資源 - Attaches a named entity to a location + 將已命名實體連結至位置 - Moves a resource from one location to another + 將資源從一個位置移至另一個 - Creates a resource + 建立資源 - Changes the state of a resource to make it accessible, available, or usable + 變更資源的狀態，使其可存取、可供使用或可使用 - Increases the effectiveness of a resource + 增加資源的有效性 - Sends data out of the environment + 將資料傳送出環境 - Use the Test verb + 使用 Test 動詞 - Removes an item from the top of a stack + 從堆疊頂端移除項目 - Safeguards a resource from attack or loss + 保護資源免於遭受攻擊或遺失 - Makes a resource available to others + 以便其他人使用資源 - Adds an item to the top of a stack + 將項目新增至堆疊頂端 - Acquires information from a source + 從來源取得資訊 - Accepts information sent from a source + 接受從來源傳送的資訊 - Resets a resource to the state that was undone + 將資源重設為未完成的狀態 - Creates an entry for a resource in a repository such as a database + 為存放庫中的資源建立項目，例如資料庫中的項目 - Deletes a resource from a container + 從容器刪除資源 - Changes the name of a resource + 變更資源的名稱 - Restores a resource to a usable condition + 將資源還原為可用狀態 - Asks for a resource or asks for permissions + 要求資源或要求權限 - Sets a resource back to its original state + 將資源設定回其原始狀態 - Changes the size of a resource + 變更資源大小 - Maps a shorthand representation of a resource to a more complete representation + 將資源的速記表示法對應至更完整表示法 - Stops an operation and then starts it again + 停止作業，然後再次啟動 - Sets a resource to a predefined state, such as a state set by Checkpoint + 將資源設定為預先定義的狀態，例如檢查點所設定的狀態 - Starts an operation that has been suspended + 啟動已擱置的作業 - Specifies an action that does not allow access to a resource + 指定不允許存取資源的動作 - Preserves data to avoid loss + 保留資料以避免遺失 - Creates a reference to a resource in a container + 建立容器中資源的參考 - Locates a resource in a container + 尋找容器中的資源 - Delivers information to a destination + 將資訊傳遞到目的地 - Replaces data on an existing resource or creates a resource that contains some data + 取代現有資源上的資料，或建立包含某些資料的資源 - Makes a resource visible to the user + 讓使用者能看見資源 - Assures that two or more resources are in the same state + 確保有兩個以上的資源處於相同狀態 - Bypasses one or more resources or points in a sequence + 略過順序中的一或多個資源或點 - Separates parts of a resource + 將資源的各個部分分開 - Initiates an operation + 起始作業 - Moves to the next point or resource in a sequence + 移至順序中的下一個點或資源 - Discontinues an activity + 中止活動 - Presents a resource for approval + 顯示核准的資源 - Pauses an activity + 暫停活動 - Specifies an action that alternates between two resources, such as to change between two locations, responsibilities, or states + 指定在兩個資源之間進行替代的動作，例如在兩個位置、責任或狀態之間變更 - Verifies the operation or consistency of a resource + 確認資源的作業或一致性 - Tracks the activities of a resource + 追蹤資源的活動 - Removes restrictions to a resource + 移除資源的限制 - Sets a resource to its previous state + 將資源設定為其先前的狀態 - Removes a resource from an indicated location + 從指出的位置移除資源 - Releases a resource that was locked + 發行已鎖定的資源 - Removes safeguards from a resource that were added to prevent it from attack or loss + 從新增為防止遭受攻擊或遺失的資源中移除保護 - Makes a resource unavailable to others + 讓其他人無法使用資源 - Removes the entry for a resource from a repository + 從存放庫移除資源的項目 - Brings a resource up-to-date to maintain its state, accuracy, conformance, or compliance + 將資源保持在最新狀態，以維護其狀態、精確度、符合性或合規性 - Uses or includes a resource to do something + 使用或包括資源以執行某些動作 - Pauses an operation until a specified event occurs + 暫停作業，直到發生指定的事件為止 - Continually inspects or monitors a resource for changes + 持續針對變更檢查或監視資源 - Adds information to a target + 將資訊新增至目標 \ No newline at end of file From dcf7c2006f6bca92a08c5e18c71ed77e5e1a90df Mon Sep 17 00:00:00 2001 From: olprod Date: Fri, 14 Aug 2026 12:26:12 -0700 Subject: [PATCH 5/7] Localized file check-in by OneLocBuild Task: Build definition ID 13420: Build ID 2677113 --- .../public.XamlLocalizableResources.tr.resx | 170 ++++++++-------- .../resources/de/GetEventResources.de.resx | 126 ++++++------ .../resources/ja/GetEventResources.ja.resx | 128 ++++++------ .../resources/pl/GetEventResources.pl.resx | 126 ++++++------ .../resources/ru/GetEventResources.ru.resx | 126 ++++++------ .../resources/tr/GetEventResources.tr.resx | 126 ++++++------ .../de/CmdletizationResources.de.resx | 46 ++--- .../resources/de/ComputerResources.de.resx | 182 +++++++++--------- .../es/CmdletizationResources.es.resx | 46 ++--- .../es/ComputerInfoResources.es.resx | 16 +- .../es/TestConnectionResources.es.resx | 8 +- .../fr/ComputerInfoResources.fr.resx | 16 +- .../resources/fr/ProcessResources.fr.resx | 68 +++---- .../fr/TestConnectionResources.fr.resx | 8 +- .../resources/fr/TestPathResources.fr.resx | 2 +- .../it/CmdletizationResources.it.resx | 46 ++--- .../ja/CmdletizationResources.ja.resx | 46 ++--- .../resources/ja/ComputerResources.ja.resx | 182 +++++++++--------- .../ja/TestConnectionResources.ja.resx | 8 +- .../pl/CmdletizationResources.pl.resx | 46 ++--- .../ru/CmdletizationResources.ru.resx | 46 ++--- .../ru/ComputerInfoResources.ru.resx | 16 +- .../ru/TestConnectionResources.ru.resx | 8 +- .../resources/tr/ComputerResources.tr.resx | 182 +++++++++--------- .../tr/TestConnectionResources.tr.resx | 8 +- .../resources/tr/TestPathResources.tr.resx | 2 +- .../ComputerInfoResources.zh-Hans.resx | 16 +- .../zh-Hans/ComputerResources.zh-Hans.resx | 182 +++++++++--------- .../TestConnectionResources.zh-Hans.resx | 8 +- .../CmdletizationResources.zh-Hant.resx | 46 ++--- .../ComputerInfoResources.zh-Hant.resx | 16 +- .../zh-Hant/ComputerResources.zh-Hant.resx | 182 +++++++++--------- .../TestConnectionResources.zh-Hant.resx | 8 +- .../resources/de/AddMember.de.resx | 26 +-- .../resources/de/AliasCommandStrings.de.resx | 32 +-- .../resources/de/ConvertHTMLStrings.de.resx | 2 +- .../resources/es/AddMember.es.resx | 26 +-- .../resources/fr/AddMember.fr.resx | 26 +-- .../resources/fr/AliasCommandStrings.fr.resx | 34 ++-- .../resources/fr/ConvertHTMLStrings.fr.resx | 2 +- .../resources/it/AliasCommandStrings.it.resx | 34 ++-- .../resources/ja/AddMember.ja.resx | 26 +-- .../resources/ja/AliasCommandStrings.ja.resx | 34 ++-- .../resources/pl/AddMember.pl.resx | 26 +-- .../resources/pl/AliasCommandStrings.pl.resx | 34 ++-- .../resources/tr/AddMember.tr.resx | 26 +-- .../resources/tr/AliasCommandStrings.tr.resx | 34 ++-- .../resources/zh-Hans/AddMember.zh-Hans.resx | 26 +-- .../zh-Hans/AliasCommandStrings.zh-Hans.resx | 34 ++-- .../zh-Hant/AliasCommandStrings.zh-Hant.resx | 34 ++-- 50 files changed, 1349 insertions(+), 1349 deletions(-) diff --git a/src/Microsoft.Management.UI.Internal/resources/tr/public.XamlLocalizableResources.tr.resx b/src/Microsoft.Management.UI.Internal/resources/tr/public.XamlLocalizableResources.tr.resx index 2231ee4929a..8f85d893022 100644 --- a/src/Microsoft.Management.UI.Internal/resources/tr/public.XamlLocalizableResources.tr.resx +++ b/src/Microsoft.Management.UI.Internal/resources/tr/public.XamlLocalizableResources.tr.resx @@ -118,66 +118,66 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Available Columns + Kullanılabilir Sütunlar - Add + Ekle - Remove + Kaldır - Selected Columns + Seçili Sütunlar - Back + Geri Localizable AutomationName for control that is used by accessibility screen readers. - Forward + İleri Localizable AutomationName for control that is used by accessibility screen readers. - Find in this column + Bu sütunda bul Background text shown in the search box. - Expand + Genişlet - Name + Ad - New Query + Yeni Sorgu - Tasks + Görevler This is the title string for the Task Pane. - Tasks + Görevler AutomationProperties.Name of a SeparatedList. - Indeterminate Progress Icon + Belirsiz İlerleme Simgesi - Add criteria + Ölçüt ekle - Overwrite the existing query or type a different name to save a new query. Each query consists of criteria, sorting, and column customizations. + Mevcut sorgunun üzerine yazın veya yeni bir sorgu kaydetmek için farklı bir ad girin. Her sorgu ölçütler, sıralama ve sütun özelleştirmelerinden oluşur. - Ok + Tamam - Cancel + İptal - Click to save a search query + Bir arama sorgusunu kaydetmek için tıklayın - Available columns + Kullanılabilir sütunlar >> @@ -188,104 +188,104 @@ The contents of a button which indicates that items will move from the right column to left column - Move up + Yukarı taşı - Move down + Aşağı taşı - OK + Tamam - Cancel + İptal - Select columns + Sütunları seçin - Move selected column to list of visible columns + Seçilen sütunu görünür sütunlar listesine taşı - Move selected column to list of hidden columns + Seçilen sütunu gizli sütunlar listesine taşı - This column may not be removed. + Bu sütun kaldırılamaz. - The list must always display at least one column. + Bu listede her zaman en az bir sütun görüntülenmelidir. - Selected columns + Seçili sütunlar - Find in this column + Bu sütunda bul - Expand + Genişlet - Click to clear all filter criteria. + Tüm filtre ölçütlerini temizlemek için tıklayın. - Click to add search criteria. + Arama ölçütü eklemek için tıklayın. - Click to expand search criteria. + Arama ölçütünü genişletmek için tıklayın. - There are currently no saved queries. + Şu anda kayıtlı sorgu yok. - Queries + Sorgular - Delete + Sil - Rename + Yeniden adlandır - {0} rule + {0} kuralı The text representation of a rule in the filter panel, displayed to accessibility clients. {0} will be the name of the rule. - Add + Ekle - Cancel + İptal - Add Filter Criteria + Filtre Ölçütü Ekle - Value + Değer The name for text input fields - <Empty> + <Boş> - Rules + Kurallar The name of the panel which contains the filter rules - Delete + Sil - Query + Sorgu - Queries + Sorgular - Search + Arama - ({0} of {1}) + ({0}/{1}) The text displayed in the management list title when the list has a filter applied. {0} will be the number of items shown in the list. {1} will be the total number of items in the list before filtering. - Searching... + Aranıyor... The text displayed in the management list title when the list is processing a filter. @@ -293,122 +293,122 @@ The text displayed in the management list title when the list does not have a filter applied. {0} will be the number of items shown in the list. - Filter + Filtre Localizable AutomationName for control that is used by accessibility screen readers. - Filter + Filtre - Shortcut Rules + Kısayol Kuralları The name used to indicate custom filter rules which are specific to a particular application. - Columns Rules + Sütun Kuralları The name used to indicate filter rules that are based upon the properties of the items in the list. - Sort Glyph + Karakter Sırala - Sort Glyph + Karakter Sırala - Collapse + Daralt - Collapse + Daralt - Sorted ascending + Artan düzende sıralandı The text used for the accessible ItemStatus property when a column is sorted ascending. - Sorted descending + Azalan düzende sıralandı The text used for the accessible ItemStatus property when a column is sorted descending. - Collapse + Daralt - Expand + Genişlet - Search + Arama - Cancel + İptal - Clear All + Tümünü Temizle - Clear All + Tümünü Temizle - Clear Search Text + Arama Metnini Temizle - Tasks + Görevler - Search + Arama The accessible name of the Search button in the filter panel. - Cancel + İptal The accessible name of the Stop Search button in the filter panel. - Expand or Collapse Filter Panel + Filtre Panelini Genişlet veya Daralt The accessible name of the button that expands/collapses the filter panel. - Filter + Filtre The background text of the list's search box when filtering is immediate. - Click to display saved search queries. + Kayıtlı arama sorgularını görüntülemek için tıklayın. - Filter applied. + Filtre uygulandı. - and + ve The first header operator indicates that it is the first item in the list of filter rules. The AND value is used to indicate that it is and'ed with the above SearchBox. - and + ve The header operator indicates that it is the first item in a group of filter rules which are the same. The AND value is used to indicate that it is and'ed with the other groups in the panel. - or + veya The Item operator indicates that it is NOT the first item in a group of filter rules which are the same. The OR value is used to indicate that it is or'ed with the other items in the same group. - No matches found. + Eşleşme bulunamadı. The text displayed in the ManagementList when the filter has been applied but matching items were found. - Collapse + Daralt - Expand + Genişlet - Show Children + Alt Öğeleri Göster - Show Children + Alt Öğeleri Göster {0}: {1} The format string used for the ManagementList title when query has been applied. For example, "Users: My Fancy Query" - Cancel + İptal - OK + Tamam \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Diagnostics/resources/de/GetEventResources.de.resx b/src/Microsoft.PowerShell.Commands.Diagnostics/resources/de/GetEventResources.de.resx index 751256c9525..bf951b5eba6 100644 --- a/src/Microsoft.PowerShell.Commands.Diagnostics/resources/de/GetEventResources.de.resx +++ b/src/Microsoft.PowerShell.Commands.Diagnostics/resources/de/GetEventResources.de.resx @@ -118,198 +118,198 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The {0} file does not have the expected file name extension. Specify only .blg, .csv, or .tsv files when you use the Path parameter. + Die {0}-Datei weist nicht die erwartete Dateinamenerweiterung auf. Geben Sie bei Verwendung des Path-Parameters nur .blg-, .csv- oder .tsv-Dateien an. - Internal performance counter API call failed. Error: {0:x8}. + Der interne Aufruf der Leistungsindikator-API ist fehlgeschlagen. Fehler: {0:x8}. - You must specify at least one Log, Provider or Path key-value pair. + Sie müssen mindestens ein Schlüssel-Wert-Paar für Protokoll, Anbieter oder Pfad angeben. - There is not an event provider on the {0} computer that matches "{1}". + Auf dem {0}-Computer ist kein Ereignisanbieter vorhanden, das mit „{1}“ übereinstimmt. - A null value was encountered in the {0} hash table key. Null values are not permitted. + Im {0}-Hashtabellenschlüssel wurde ein NULL-Wert gefunden. NULL-Werte sind nicht zulässig. - Constructed structured query: + Erstellte strukturierte Abfrage: {0}. - The {0} provider writes events to the {1} log. + Der {0}-Anbieter schreibt Ereignisse in das {1}-Protokoll. - The value of the StartTime parameter must be less than the value of the EndTime parameter. + Der Wert des StartTime-Parameters muss kleiner sein als der Wert des EndTime-Parameters. - There is not an event log on the {0} computer that matches "{1}". + Auf dem {0}-Computer ist kein Ereignisprotokoll vorhanden, das mit „{1}“ übereinstimmt. Microsoft - The Circular parameter will be ignored unless the MaxSize parameter is also specified. + Der Circular-Parameter wird ignoriert, wenn nicht auch der MaxSize-Parameter angegeben ist. - Unable to open the {0} file for writing. + Die {0}-Datei kann nicht zum Schreiben geöffnet werden. - Invalid value '{0}' specified for keyword. + Für das Schlüsselwort wurde ein ungültiger Wert „{0}“ angegeben. - The {0} performance counter cannot be exported to the {1} file because it was not part of the first sample set. + Der {0}-Leistungsindikator kann nicht in die {1}-Datei exportiert werden, da er nicht Teil des ersten Stichprobensatzes war. - No events were found that match the specified selection criteria. + Es wurden keine Ereignisse gefunden, die den angegebenen Auswahlkriterien entsprechen. - The default values for this command failed. Error: {0:x8}. + Die Standardwerte für diesen Befehl konnten nicht ermittelt werden. Fehler: {0:x8}. - You cannot import different types of performance log files in the same command. Specify only one type of file in the Path parameter. + Es ist nicht möglich, im selben Befehl unterschiedliche Typen von Leistungsprotokolldateien zu importieren. Geben Sie im Path-Parameter nur einen Dateityp an. - The {0} path does not appear to be a valid log file path. Specify a valid file system path. + Der {0}-Pfad scheint kein gültiger Protokolldateipfad zu sein. Geben Sie einen gültigen Dateisystempfad an. - A valid Event Id must be specified. + Es muss eine gültige Ereignis-ID angegeben werden. - Could not retrieve information about the {0} provider. Error: {1}. + Es konnten keine Informationen über den {0}-Anbieter abgerufen werden. Fehler: {1}. - The {0} event log can be read only in the forward chronological order because it is an analytical or a debug log. To see events from the {0} event log, use the Oldest parameter in the command. + Das {0}-Ereignisprotokoll kann nur in aufsteigender chronologischer Reihenfolge gelesen werden, da es sich um ein analytisches oder Debugprotokoll handelt. Um Ereignisse aus dem {0}-Ereignisprotokoll anzuzeigen, verwenden Sie den Oldest-Parameter im Befehl. - The following export destination path is ambiguous: {0}. + Der folgende Exportzielpfad ist mehrdeutig: {0}. - The {0} performance counter path is not valid. + Der {0}-Leistungsindikatorpfad ist ungültig. - The data in one of the performance counter samples is not valid. View the Status property for each PerformanceCounterSample object to make sure it contains valid data. + Die Daten in einer der Leistungsindikatorstichproben sind ungültig. Überprüfen Sie die Status-Eigenschaft für jedes Objekt vom Typ „PerformanceCounterSample“, um sicherzustellen, dass gültige Daten enthalten sind. - Provided payload does not match with the template that was defined for event id {0}. -The defined template is following: + Die angegebene Nutzlast stimmt nicht mit der Vorlage überein, die für die Ereignis-ID „{0}“ definiert wurde. +Die definierte Vorlage lautet wie folgt: {1} - Cannot find any performance counter sets on the {0} computer that match the following: {1}. + Es wurden keine Leistungsindikatorsätze auf dem {0}-Computer gefunden, die den folgenden Kriterien entsprechen: {1}. - No valid counter paths were found in the files. + In den Dateien wurden keine gültigen Leistungsindikatorpfade gefunden. - Unable to create the {0} file. Verify that the path is valid. + Die {0}-Datei kann nicht erstellt werden. Überprüfen Sie, ob der Pfad gültig ist. - Could not find any performance counter sets on the {0} computer: error {1:x8}. Verify that the {0} computer exists, that it is discoverable, and that you have sufficient privileges to view performance counter data on that computer. + Auf dem {0}-Computer wurden keine Leistungsindikatorsätze gefunden: Fehler {1:x8}. Stellen Sie sicher, dass der {0}-Computer vorhanden und auffindbar ist und dass Sie über ausreichende Berechtigungen zum Anzeigen von Leistungsindikatordaten auf diesem Computer verfügen. - Event cannot be written because there are no events defined with id {0} for the provider {1}. Please correct the event id and try again. + Das Ereignis kann nicht geschrieben werden, da keine Ereignisse mit der ID „{0}“ für den Anbieter „{1}“ definiert sind. Korrigieren Sie die Ereignis-ID, und versuchen Sie es noch mal. - The {0} Context key-value is not a valid SID or NT account name. + Das {0} Schlüssel-Wert-Paar für Context ist keine gültige SID oder kein gültiger NT-Kontoname. - Event cannot be written because the specified version {0} for event {1} is not defined for the provider {2}. Please correct the version and try again. + Das Ereignis kann nicht geschrieben werden, da die angegebene Version {0} für das Ereignis „{1}“ für den Anbieter „{2}“ nicht definiert ist. Korrigieren Sie die Version, und versuchen Sie es erneut. - You cannot import more than 32 .blg counter log files in each command. + Pro Befehl können nicht mehr als 32 .blg-Leistungsindikatorprotokolldateien importiert werden. - The specified providers do not write events to the {0} log. This log will be ignored. + Die angegebenen Anbieter schreiben keine Ereignisse in das {0}-Protokoll. Dieses Protokoll wird ignoriert. - The following value is not in a valid security identifier (SID) format: {0}. Enter a valid SID, such as S-1-5-32-544. + Der folgende Wert liegt nicht in einem gültigen SID-Format vor: {0}. Geben Sie eine gültige SID ein, z. B. S-1-5-32-544. - No provider found with name {0}. + Es wurde kein Anbieter mit dem Namen „{0}“ gefunden. - Cannot retrieve information about the {0} performance counter set because access was denied. + Es können keine Informationen über den {0}-Leistungsindikatorsatz abgerufen werden, da der Zugriff verweigert wurde. - Event cannot be written because multiple events with id {0} have been defined for provider {1}. Please provide a version for the event and try again. + Das Ereignis kann nicht geschrieben werden, da mehrere Ereignisse mit der ID „{0}“ für den Anbieter „{1}“ definiert wurden. Geben Sie eine Version für das Ereignis an, und versuchen Sie es noch mal. - The {0} event log file can be read only in the forward chronological order because it is an .etl or an .evt file. To see events from the {0} event log, use the Oldest parameter in the command. + Die {0}-Ereignisprotokolldatei kann nur in chronologischer Vorwärtsreihenfolge gelesen werden, da es sich um eine ETL- oder EVT-Datei handelt. Um Ereignisse aus dem {0}-Ereignisprotokoll anzuzeigen, verwenden Sie den Oldest-Parameter im Befehl. - Provider name must be specified. + Der Anbietername muss angegeben werden. - The {0} file does not appear to be a valid log file. Specify only .evtx, .etl, or .evt files as values of the Path parameter. + Die {0}-Datei scheint keine gültige Protokolldatei zu sein. Geben Sie als Werte für den Path-Parameter nur .evtx-, .etl- oder .evt-Dateien an. - The {0} performance counter path is either not valid or it is not present in the following files: {1}. + Der {0}-Leistungsindikatorpfad ist entweder ungültig oder in den folgenden Dateien nicht vorhanden: {1}. Zeitstempel - The following value is not in a valid DateTime format: {0}. + Der folgende Wert weist kein gültiges DateTime-Format auf: {0}. - To access the '{0}' log start PowerShell with elevated user rights. Error: {1} + Starten Sie PowerShell mit erhöhten Benutzerrechten, um auf das Protokoll „{0}“ zuzugreifen. Fehler: {1} - Access denied for log: '{0}'. + Zugriff verweigert für Protokoll: „{0}“. - Launch PowerShell with elevated user rights. + Starten Sie PowerShell mit erweiterten Benutzerrechten. - Cannot retrieve event message text. + Der Text der Ereignismeldung kann nicht abgerufen werden. - The {0} file already exists. To overwrite this file, use the Force parameter in the Export-Counter command. + Die {0}-Datei ist bereits vorhanden. Um diese Datei zu überschreiben, verwenden Sie den Force-Parameter im Befehl „Export-Counter“. - The Continuous parameter and the MaxSamples parameter cannot be used in the same command. + Der Continuous-Parameter und der MaxSamples-Parameter können nicht im selben Befehl verwendet werden. - This cmdlet can be run only on Microsoft Windows 7 and above. + Dieses Cmdlet kann nur unter Microsoft Windows 7 und höher ausgeführt werden. - This PowerShell snap-in contains Windows Eventing and Performance Counter cmdlets. + Dieses PowerShell-Snap-In enthält Windows-Ereignis- und Leistungsindikator-Cmdlets. - Cannot find any performance counter sets in the {0} files that match the following: {1}. + Es wurden keine Leistungsindikatorsätze in den {0}-Dateien gefunden, die den folgenden Kriterien entsprechen: {1}. - The specified providers do not write events to any of the specified logs. + Die angegebenen Anbieter schreiben keine Ereignisse in die angegebenen Protokolle. - Cooked Values + Verarbeitete Werte - You cannot import more than one comma-separated (.csv) or tab-separated (.tsv) performance counter file in each command. + Pro Befehl kann nur eine durch Kommas getrennte (.csv) oder durch Tabstopps getrennte (.tsv) Leistungsindikator-Datei importiert werden. - Log count ({0}) is exceeded Windows Event Log API limit ({1}). Adjust filter to return less log names. + Die Anzahl der Protokolle ({0}) überschreitet das Limit der Windows-Ereignisprotokoll-API ({1}). Passen Sie den Filter an, um weniger Protokollnamen zurückzugeben. - Specifies the event logs. Wildcards are permitted. + Gibt die Ereignisprotokolle an. Platzhalter sind zulässig. - Specifies the event logs that this cmdlet gets events from. Wildcards are permitted. + Gibt die Ereignisprotokolle an, aus denen dieses Cmdlet Ereignisse abruft. Platzhalter sind zulässig. - Specifies the event log providers that this cmdlet gets. + Gibt die Ereignisprotokollanbieter an, die dieses Cmdlet abruft. - Specifies the event log providers from which this cmdlet gets events. + Gibt die Ereignisprotokollanbieter an, von denen dieses Cmdlet Ereignisse abruft. - Specifies the path to the event log files that this cmdlet gets events from. + Gibt den Pfad zu den Ereignisprotokolldateien an, aus denen dieses Cmdlet Ereignisse abruft. - Specifies the maximum number of events that are returned. + Gibt die Höchstzahl zurückzugebender Ereignisse an. - Specifies the name of the computer from which this cmdlet gets data. + Gibt den Namen des Computers an, von dem dieses Cmdlet Daten abruft. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Diagnostics/resources/ja/GetEventResources.ja.resx b/src/Microsoft.PowerShell.Commands.Diagnostics/resources/ja/GetEventResources.ja.resx index 7f634a5a42d..5f689c51c80 100644 --- a/src/Microsoft.PowerShell.Commands.Diagnostics/resources/ja/GetEventResources.ja.resx +++ b/src/Microsoft.PowerShell.Commands.Diagnostics/resources/ja/GetEventResources.ja.resx @@ -118,198 +118,198 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The {0} file does not have the expected file name extension. Specify only .blg, .csv, or .tsv files when you use the Path parameter. + {0} ファイルに必要なファイル名拡張子がありません。Path パラメーターを使用するときは、.blg、.csv、または .tsv ファイルのみを指定します。 - Internal performance counter API call failed. Error: {0:x8}. + 内部パフォーマンス カウンター API 呼び出しが失敗しました。エラー: {0:x8}。 - You must specify at least one Log, Provider or Path key-value pair. + 少なくとも 1 つの Log、Provider、または Path キーと値のペアを指定する必要があります。 - There is not an event provider on the {0} computer that matches "{1}". + "{1}" と一致するイベント プロバイダーが {0} コンピューターにありません。 - A null value was encountered in the {0} hash table key. Null values are not permitted. + {0} ハッシュ テーブル キーで null 値が見つかりました。null 値は許可されません。 - Constructed structured query: -{0}. + 構築された構造化クエリ: +{0}。 - The {0} provider writes events to the {1} log. + {0} プロバイダーは、イベントを {1} ログに書き込みます。 - The value of the StartTime parameter must be less than the value of the EndTime parameter. + StartTime パラメーターの値は、EndTime パラメーターの値より小さくする必要があります。 - There is not an event log on the {0} computer that matches "{1}". + "{1}" と一致するイベント ログが {0} コンピューターにありません。 Microsoft - The Circular parameter will be ignored unless the MaxSize parameter is also specified. + MaxSize パラメーターも指定しない限り、Circular パラメーターは無視されます。 - Unable to open the {0} file for writing. + 書き込み用に {0} ファイルを開くことができません。 - Invalid value '{0}' specified for keyword. + 無効な値 '{0}' がキーワードに指定されました。 - The {0} performance counter cannot be exported to the {1} file because it was not part of the first sample set. + {0} パフォーマンス カウンターは、最初のサンプル セットの一部ではなかったため、{1} ファイルにエクスポートできません。 - No events were found that match the specified selection criteria. + 指定された選択条件に一致するイベントが見つかりませんでした。 - The default values for this command failed. Error: {0:x8}. + このコマンドの既定値は失敗しました。エラー: {0:x8}。 - You cannot import different types of performance log files in the same command. Specify only one type of file in the Path parameter. + 同じコマンドで異なる種類のパフォーマンス ログ ファイルをインポートすることはできません。 Path パラメーターに指定するファイルの種類は 1 つだけです。 - The {0} path does not appear to be a valid log file path. Specify a valid file system path. + {0} パスは有効なログ ファイル パスではない可能性があります。有効なファイル システム パスを指定してください。 - A valid Event Id must be specified. + 有効な Event ID を指定する必要があります。 - Could not retrieve information about the {0} provider. Error: {1}. + {0} プロバイダーに関する情報を取得できませんでした。エラー: {1}。 - The {0} event log can be read only in the forward chronological order because it is an analytical or a debug log. To see events from the {0} event log, use the Oldest parameter in the command. + {0} イベント ログは、分析ログまたはデバッグ ログであるため、順順にのみ読み取ることができます。{0} イベント ログのイベントを表示するには、コマンドで Oldest パラメーターを使用します。 - The following export destination path is ambiguous: {0}. + 次のエクスポート先パスがあいまいです: {0}。 - The {0} performance counter path is not valid. + {0} パフォーマンス カウンターのパスが無効です。 - The data in one of the performance counter samples is not valid. View the Status property for each PerformanceCounterSample object to make sure it contains valid data. + パフォーマンス カウンターサンプルの 1 つのデータが無効です。各 PerformanceCounterSample オブジェクトの Status プロパティを表示して、有効なデータが含まれていることを確認してください。 - Provided payload does not match with the template that was defined for event id {0}. -The defined template is following: + 指定されたペイロードが、イベント ID {0} に対して定義されたテンプレートと一致しません。 +定義されたテンプレートは次のとおりです: {1} - Cannot find any performance counter sets on the {0} computer that match the following: {1}. + 次に一致するパフォーマンス カウンター セットが {0} コンピューターに見つかりません: {1}。 - No valid counter paths were found in the files. + ファイルに有効なカウンター パスが見つかりませんでした。 - Unable to create the {0} file. Verify that the path is valid. + {0} ファイルを作成できません。パスが有効であることを確認してください。 - Could not find any performance counter sets on the {0} computer: error {1:x8}. Verify that the {0} computer exists, that it is discoverable, and that you have sufficient privileges to view performance counter data on that computer. + {0} コンピューターでパフォーマンス カウンター セットが見つかりませんでした: エラー {1:x8}。{0} コンピューターが存在すること、コンピューターが検出可能であり、そのコンピューターのパフォーマンス カウンター データを表示するのに十分な特権があることを確認してください。 - Event cannot be written because there are no events defined with id {0} for the provider {1}. Please correct the event id and try again. + Event は、プロバイダー {1} の ID {0} で定義されたイベントがないため、書き込めません。 イベント ID を修正して、もう一度お試しください。 - The {0} Context key-value is not a valid SID or NT account name. + {0} コンテキストのキー値が有効な SID または NT アカウント名ではありません。 - Event cannot be written because the specified version {0} for event {1} is not defined for the provider {2}. Please correct the version and try again. + Event は、イベント {1} の指定されたバージョン {0} がプロバイダー {2} に対して定義されていないため、書き込めません。 バージョンを修正して、もう一度お試しください。 - You cannot import more than 32 .blg counter log files in each command. + 各コマンドで 32 個を超える .blg カウンター ログ ファイルをインポートすることはできません。 - The specified providers do not write events to the {0} log. This log will be ignored. + 指定されたプロバイダーは、{0} ログにイベントを書き込みません。このログは無視されます。 - The following value is not in a valid security identifier (SID) format: {0}. Enter a valid SID, such as S-1-5-32-544. + 次の値は、有効なセキュリティ識別子 (SID) 形式ではありません: {0}。S-1-5-32-544 などの有効な SID を入力してください。 - No provider found with name {0}. + {0} という名前のプロバイダーが見つかりませんでした。 - Cannot retrieve information about the {0} performance counter set because access was denied. + アクセスが拒否されたため、{0} パフォーマンス カウンター セットに関する情報を取得できません。 - Event cannot be written because multiple events with id {0} have been defined for provider {1}. Please provide a version for the event and try again. + プロバイダー {1} に対して ID {0} の複数のイベントが定義されているため、イベントを書き込めません。 イベントのバージョンを指定して、もう一度お試しください。 - The {0} event log file can be read only in the forward chronological order because it is an .etl or an .evt file. To see events from the {0} event log, use the Oldest parameter in the command. + {0} イベント ログ ファイルは、.etl または .evt ファイルであるため、順に時系列でのみ読み取ることができます。{0} イベント ログのイベントを表示するには、コマンドで Oldest パラメーターを使用します。 - Provider name must be specified. + フォルダー名を指定する必要があります。 - The {0} file does not appear to be a valid log file. Specify only .evtx, .etl, or .evt files as values of the Path parameter. + {0} ファイルは有効なログ ファイルではないようです。Path パラメーターの値として指定するのは、.evtx、.etl、または .evt ファイルのみです。 - The {0} performance counter path is either not valid or it is not present in the following files: {1}. + {0} パフォーマンス カウンターパスが無効であるか、次のファイルに存在しません: {1}。 タイムスタンプ - The following value is not in a valid DateTime format: {0}. + 次の値は有効な DateTime 形式ではありません: {0}。 - To access the '{0}' log start PowerShell with elevated user rights. Error: {1} + '{0}' ログにアクセスするには、昇格されたユーザー特権で PowerShell を起動します。 エラー: {1} - Access denied for log: '{0}'. + 次のログへのアクセスが拒否されました: '{0}'。 - Launch PowerShell with elevated user rights. + 昇格されたユーザー特権で PowerShell を起動してください。 - Cannot retrieve event message text. + イベント メッセージ テキストを取得できません。 - The {0} file already exists. To overwrite this file, use the Force parameter in the Export-Counter command. + {0} ファイルは既に存在します。このファイルを上書きするには、Export-Counter コマンドで Force パラメーターを使用します。 - The Continuous parameter and the MaxSamples parameter cannot be used in the same command. + Continuous パラメーターと MaxSamples パラメーターは、同じコマンドでは使用できません。 - This cmdlet can be run only on Microsoft Windows 7 and above. + このコマンドレットは、Microsoft Windows 7 以上でのみ実行できます。 - This PowerShell snap-in contains Windows Eventing and Performance Counter cmdlets. + この PowerShell スナップインには、Windows Eventing および Performance Counter コマンドレットが含まれています。 - Cannot find any performance counter sets in the {0} files that match the following: {1}. + 次に一致するパフォーマンス カウンター セットが {0} ファイルに見つかりません: {1}。 - The specified providers do not write events to any of the specified logs. + 指定されたプロバイダーは、指定されたログにイベントを書き込みません。 - Cooked Values + クックされた値 - You cannot import more than one comma-separated (.csv) or tab-separated (.tsv) performance counter file in each command. + コマンドごとに複数のコンマ区切り (.csv) またはタブ区切り (.tsv) パフォーマンス カウンター ファイルをインポートすることはできません。 - Log count ({0}) is exceeded Windows Event Log API limit ({1}). Adjust filter to return less log names. + ログ数 ({0}) が Windows イベント ログ API の制限 ({1}) を超えています。フィルターを調整して、返されるログ名を減らしてください。 - Specifies the event logs. Wildcards are permitted. + イベント ログを指定します。ワイルドカードを使用できます。 - Specifies the event logs that this cmdlet gets events from. Wildcards are permitted. + このコマンドレットがイベントを取得するイベント ログを指定してください。ワイルドカードを使用できます。 - Specifies the event log providers that this cmdlet gets. + このコマンドレットが取得するイベント ログ プロバイダーを指定します。 - Specifies the event log providers from which this cmdlet gets events. + このコマンドレットがイベントを取得するイベント ログ プロバイダーを指定します。 - Specifies the path to the event log files that this cmdlet gets events from. + このコマンドレットがイベントを取得するイベント ログ ファイルへのパスを指定します。 - Specifies the maximum number of events that are returned. + 返されるイベントの最大数を指定します。 - Specifies the name of the computer from which this cmdlet gets data. + このコマンドレットがデータを取得するコンピューターの名前を指定します。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Diagnostics/resources/pl/GetEventResources.pl.resx b/src/Microsoft.PowerShell.Commands.Diagnostics/resources/pl/GetEventResources.pl.resx index 5e906cc9575..881d40cc82b 100644 --- a/src/Microsoft.PowerShell.Commands.Diagnostics/resources/pl/GetEventResources.pl.resx +++ b/src/Microsoft.PowerShell.Commands.Diagnostics/resources/pl/GetEventResources.pl.resx @@ -118,198 +118,198 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The {0} file does not have the expected file name extension. Specify only .blg, .csv, or .tsv files when you use the Path parameter. + Plik {0} nie ma oczekiwanego rozszerzenia nazwy pliku. Określ tylko pliki blg, .csv lub tsv podczas używania parametru Path. - Internal performance counter API call failed. Error: {0:x8}. + Wywołanie interfejsu API wewnętrznego licznika wydajności nie powiodło się. Błąd: {0:x8}. - You must specify at least one Log, Provider or Path key-value pair. + Musisz określić co najmniej jedną parę klucz-wartość dziennika, dostawcy lub ścieżki. - There is not an event provider on the {0} computer that matches "{1}". + Na komputerze {0} nie ma dostawcy zdarzeń zgodnego z parametrem „{1}”. - A null value was encountered in the {0} hash table key. Null values are not permitted. + W kluczu tablicy skrótów {0} napotkano wartość null. Wartości null są niedozwolone. - Constructed structured query: + Utworzono ustrukturyzowane zapytanie: {0}. - The {0} provider writes events to the {1} log. + Dostawca {0} zapisuje zdarzenia w dzienniku {1}. - The value of the StartTime parameter must be less than the value of the EndTime parameter. + Wartość parametru StartTime musi być mniejsza niż wartość parametru EndTime. - There is not an event log on the {0} computer that matches "{1}". + Na komputerze {0} nie ma dziennika zdarzeń pasującego do „{1}”. Microsoft - The Circular parameter will be ignored unless the MaxSize parameter is also specified. + Parametr Circular będzie ignorowany, chyba że określono również parametr MaxSize. - Unable to open the {0} file for writing. + Nie można otworzyć pliku {0} do zapisu. - Invalid value '{0}' specified for keyword. + Określono nieprawidłową wartość „{0}” dla słowa kluczowego. - The {0} performance counter cannot be exported to the {1} file because it was not part of the first sample set. + Nie można wyeksportować licznika wydajności {0} do pliku {1}, ponieważ nie był on częścią pierwszego zestawu przykładów. - No events were found that match the specified selection criteria. + Nie znaleziono zdarzeń spełniających określone kryteria wyboru. - The default values for this command failed. Error: {0:x8}. + Wartości domyślne dla tego polecenia nie powiodły się. Błąd: {0:x8}. - You cannot import different types of performance log files in the same command. Specify only one type of file in the Path parameter. + Nie można zaimportować różnych typów plików dziennika wydajności w tym samym poleceniu. Określ tylko jeden typ pliku w parametrze Path. - The {0} path does not appear to be a valid log file path. Specify a valid file system path. + Ścieżka {0} prawdopodobnie nie jest prawidłową ścieżką pliku dziennika. Określ prawidłową ścieżkę systemu plików. - A valid Event Id must be specified. + Należy określić prawidłowy identyfikator zdarzenia. - Could not retrieve information about the {0} provider. Error: {1}. + Nie można pobrać informacji o dostawcy {0}. Błąd: {1}. - The {0} event log can be read only in the forward chronological order because it is an analytical or a debug log. To see events from the {0} event log, use the Oldest parameter in the command. + Dziennik zdarzeń {0} może być tylko do odczytu w kolejności chronologicznej przesyłania dalej, ponieważ jest to dziennik analityczny lub debugowania. Aby wyświetlić zdarzenia z dziennika zdarzeń {0}, użyj najstarszego parametru w poleceniu. - The following export destination path is ambiguous: {0}. + Następująca ścieżka docelowa eksportu jest niejednoznaczna: {0}. - The {0} performance counter path is not valid. + Ścieżka licznika wydajności {0} jest nieprawidłowa. - The data in one of the performance counter samples is not valid. View the Status property for each PerformanceCounterSample object to make sure it contains valid data. + Dane w jednej z próbek licznika wydajności są nieprawidłowe. Wyświetl właściwość Status dla każdego obiektu PerformanceCounterSample, aby upewnić się, że zawiera on prawidłowe dane. - Provided payload does not match with the template that was defined for event id {0}. -The defined template is following: + Podany ładunek jest niezgodny z szablonem zdefiniowanym dla identyfikatora zdarzenia {0}. +Zdefiniowany szablon jest następujący: {1} - Cannot find any performance counter sets on the {0} computer that match the following: {1}. + Nie można odnaleźć żadnych zestawów liczników wydajności na komputerze {0} zgodnych z następującymi elementami: {1}. - No valid counter paths were found in the files. + Nie znaleziono prawidłowych ścieżek liczników w plikach. - Unable to create the {0} file. Verify that the path is valid. + Nie można utworzyć pliku {0}. Sprawdź, czy ścieżka jest prawidłowa. - Could not find any performance counter sets on the {0} computer: error {1:x8}. Verify that the {0} computer exists, that it is discoverable, and that you have sufficient privileges to view performance counter data on that computer. + Nie można odnaleźć żadnych zestawów liczników wydajności na komputerze {0}: błąd {1:x8}. Sprawdź, czy komputer {0} istnieje, czy jest wykrywalny i czy masz wystarczające uprawnienia do wyświetlania danych licznika wydajności na tym komputerze. - Event cannot be written because there are no events defined with id {0} for the provider {1}. Please correct the event id and try again. + Nie można zapisać zdarzenia, ponieważ nie zdefiniowano żadnych zdarzeń o identyfikatorze {0} dostawcy {1}. Popraw identyfikator zdarzenia i spróbuj ponownie. - The {0} Context key-value is not a valid SID or NT account name. + Wartość {0} klucza kontekstu nie jest prawidłową nazwą konta SID lub NT. - Event cannot be written because the specified version {0} for event {1} is not defined for the provider {2}. Please correct the version and try again. + Nie można zapisać zdarzenia, ponieważ określona wersja {0} zdarzenia {1} nie jest zdefiniowana dla dostawcy {2}. Popraw wersję i spróbuj ponownie. - You cannot import more than 32 .blg counter log files in each command. + W żadnym poleceniu nie można zaimportować więcej niż 32 plików dziennika licznika BLG. - The specified providers do not write events to the {0} log. This log will be ignored. + Określeni dostawcy nie zapisują zdarzeń w dzienniku {0}. Ten dziennik zostanie zignorowany. - The following value is not in a valid security identifier (SID) format: {0}. Enter a valid SID, such as S-1-5-32-544. + Następująca wartość nie ma prawidłowego formatu identyfikatora zabezpieczeń (SID): {0}. Wprowadź prawidłowy identyfikator SID, taki jak S-1-5-32-544. - No provider found with name {0}. + Nie znaleziono dostawcy o nazwie {0}. - Cannot retrieve information about the {0} performance counter set because access was denied. + Nie można pobrać informacji o zestawie liczników wydajności {0}, ponieważ odmówiono dostępu. - Event cannot be written because multiple events with id {0} have been defined for provider {1}. Please provide a version for the event and try again. + Nie można zapisać zdarzenia, ponieważ dla dostawcy {1} zdefiniowano wiele zdarzeń o identyfikatorze {0}. Podaj wersję zdarzenia i spróbuj ponownie. - The {0} event log file can be read only in the forward chronological order because it is an .etl or an .evt file. To see events from the {0} event log, use the Oldest parameter in the command. + Plik dziennika zdarzeń {0} może być tylko do odczytu w kolejności chronologicznej przesyłania dalej, ponieważ jest to plik etl lub evt. Aby wyświetlić zdarzenia z dziennika zdarzeń {0}, użyj najstarszego parametru w poleceniu. - Provider name must be specified. + Należy określić nazwę dostawcy. - The {0} file does not appear to be a valid log file. Specify only .evtx, .etl, or .evt files as values of the Path parameter. + Plik {0} prawdopodobnie nie jest prawidłowym plikiem dziennika. Określ tylko pliki evtx, etl lub evt jako wartości parametru Path. - The {0} performance counter path is either not valid or it is not present in the following files: {1}. + Ścieżka licznika wydajności {0} jest nieprawidłowa lub nie występuje w następujących plikach: {1}. Znacznik czasu - The following value is not in a valid DateTime format: {0}. + Następująca wartość nie ma prawidłowego formatu daty/godziny: {0}. - To access the '{0}' log start PowerShell with elevated user rights. Error: {1} + Aby uzyskać dostęp do dziennika „{0}”, uruchom program PowerShell z podwyższonym poziomem praw użytkownika. Błąd: {1} - Access denied for log: '{0}'. + Odmowa dostępu do dziennika: „{0}”. - Launch PowerShell with elevated user rights. + Uruchom program PowerShell z podwyższonym poziomem praw użytkownika. - Cannot retrieve event message text. + Nie można pobrać tekstu komunikatu zdarzenia. - The {0} file already exists. To overwrite this file, use the Force parameter in the Export-Counter command. + Plik {0} już istnieje. Aby zastąpić ten plik, użyj parametru Force w poleceniu Export-Counter. - The Continuous parameter and the MaxSamples parameter cannot be used in the same command. + Parametry Continuous i MaxSamples nie mogą być używane w tym samym poleceniu. - This cmdlet can be run only on Microsoft Windows 7 and above. + To polecenie cmdlet można uruchomić tylko w systemie Microsoft Windows 7 lub nowszym. - This PowerShell snap-in contains Windows Eventing and Performance Counter cmdlets. + Ta przystawka programu PowerShell zawiera polecenia cmdlet licznika zdarzeń i wydajności systemu Windows. - Cannot find any performance counter sets in the {0} files that match the following: {1}. + Nie można odnaleźć żadnych zestawów liczników wydajności w plikach {0} zgodnych z następującymi elementami: {1}. - The specified providers do not write events to any of the specified logs. + Określeni dostawcy nie zapisują zdarzeń w żadnym z określonych dzienników. - Cooked Values + Przetworzone wartości - You cannot import more than one comma-separated (.csv) or tab-separated (.tsv) performance counter file in each command. + W żadnym poleceniu nie można zaimportować więcej niż jednego pliku rozdzielanego przecinkami (.csv) ani pliku licznika wydajności rozdzielanego tabulatorami (tsv). - Log count ({0}) is exceeded Windows Event Log API limit ({1}). Adjust filter to return less log names. + Liczba dzienników ({0}) przekracza limit interfejsu API dziennika zdarzeń systemu Windows ({1}). Dostosuj filtr, aby zwracał mniej nazw dzienników. - Specifies the event logs. Wildcards are permitted. + Określa dzienniki zdarzeń. Symbole wieloznaczne są dozwolone. - Specifies the event logs that this cmdlet gets events from. Wildcards are permitted. + Określa dzienniki zdarzeń, z których to polecenie cmdlet pobiera zdarzenia. Symbole wieloznaczne są dozwolone. - Specifies the event log providers that this cmdlet gets. + Określa dostawców dziennika zdarzeń, z których to polecenie cmdlet pobiera dane. - Specifies the event log providers from which this cmdlet gets events. + Określa dostawców dziennika zdarzeń, od których to polecenie cmdlet pobiera zdarzenia. - Specifies the path to the event log files that this cmdlet gets events from. + Określa ścieżkę do plików dziennika zdarzeń, z których to polecenie cmdlet pobiera zdarzenia. - Specifies the maximum number of events that are returned. + Określa maksymalną liczbę zwracanych zdarzeń. - Specifies the name of the computer from which this cmdlet gets data. + Określa nazwę komputera, z którego to polecenie cmdlet pobiera dane. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Diagnostics/resources/ru/GetEventResources.ru.resx b/src/Microsoft.PowerShell.Commands.Diagnostics/resources/ru/GetEventResources.ru.resx index 3edc75ebda4..b91f7515153 100644 --- a/src/Microsoft.PowerShell.Commands.Diagnostics/resources/ru/GetEventResources.ru.resx +++ b/src/Microsoft.PowerShell.Commands.Diagnostics/resources/ru/GetEventResources.ru.resx @@ -118,198 +118,198 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The {0} file does not have the expected file name extension. Specify only .blg, .csv, or .tsv files when you use the Path parameter. + Файл {0} не имеет ожидаемого расширения имени файла. При использовании параметра Path указывайте только файлы .blg, .csv или .tsv. - Internal performance counter API call failed. Error: {0:x8}. + Сбой вызова API внутреннего счетчика производительности. Ошибка: {0:x8}. - You must specify at least one Log, Provider or Path key-value pair. + Необходимо указать хотя бы одну пару "ключ-значение" для журнала, поставщика или пути. - There is not an event provider on the {0} computer that matches "{1}". + На компьютере {0} нет поставщика событий, соответствующего {1}. - A null value was encountered in the {0} hash table key. Null values are not permitted. + В ключе хэш-таблицы {0} обнаружено значение NULL. Значения NULL не допускаются. - Constructed structured query: + Сформированный структурированный запрос: {0}. - The {0} provider writes events to the {1} log. + Поставщик {0} записывает события в журнал {1}. - The value of the StartTime parameter must be less than the value of the EndTime parameter. + Значение параметра StartTime должно быть меньше значения параметра EndTime. - There is not an event log on the {0} computer that matches "{1}". + На компьютере {0} нет журнала событий, соответствующего {1}. Microsoft - The Circular parameter will be ignored unless the MaxSize parameter is also specified. + Параметр Circular будет проигнорирован, если также не указан параметр MaxSize. - Unable to open the {0} file for writing. + Не удалось открыть файл {0} для записи. - Invalid value '{0}' specified for keyword. + Указано недопустимое значение {0} для ключевого слова. - The {0} performance counter cannot be exported to the {1} file because it was not part of the first sample set. + Счетчик производительности {0} невозможно экспортировать в файл {1}, так как он не входил в первый набор образцов. - No events were found that match the specified selection criteria. + Не найдены события, соответствующие указанным критериям выбора. - The default values for this command failed. Error: {0:x8}. + Не удалось использовать значения по умолчанию для этой команды. Ошибка: {0:x8}. - You cannot import different types of performance log files in the same command. Specify only one type of file in the Path parameter. + Нельзя импортировать разные типы файлов журнала производительности в одной команде. Укажите только один тип файла в параметре Path. - The {0} path does not appear to be a valid log file path. Specify a valid file system path. + Путь {0} не является допустимым путем к файлу журнала. Укажите допустимый путь к файловой системе. - A valid Event Id must be specified. + Необходимо указать допустимый идентификатор события. - Could not retrieve information about the {0} provider. Error: {1}. + Не удалось получить сведения о поставщике {0}. Ошибка: {1}. - The {0} event log can be read only in the forward chronological order because it is an analytical or a debug log. To see events from the {0} event log, use the Oldest parameter in the command. + Журнал событий {0} можно просматривать только в прямом хронологическом порядке, поскольку это аналитический или отладочный журнал. Чтобы просмотреть события из журнала событий {0}, используйте параметр Oldest в команде. - The following export destination path is ambiguous: {0}. + Указанный путь назначения экспорта неоднозначен: {0}. - The {0} performance counter path is not valid. + Путь счетчика производительности {0} недопустим. - The data in one of the performance counter samples is not valid. View the Status property for each PerformanceCounterSample object to make sure it contains valid data. + Данные в одном из примеров счетчика производительности не являются допустимым. Проверьте свойство Status каждого объекта PerformanceCounterSample, чтобы убедиться, что он содержит допустимые данные. - Provided payload does not match with the template that was defined for event id {0}. -The defined template is following: + Предоставленные данные не соответствуют шаблону, определенному для идентификатора события {0}. +Определен следующий шаблон: {1} - Cannot find any performance counter sets on the {0} computer that match the following: {1}. + Не удается найти на компьютере {0} ни одного набора счетчиков производительности, соответствующих следующему: {1}. - No valid counter paths were found in the files. + В файлах не найдено допустимых путей счетчиков. - Unable to create the {0} file. Verify that the path is valid. + Не удалось создать файл {0}. Убедитесь, что путь допустим. - Could not find any performance counter sets on the {0} computer: error {1:x8}. Verify that the {0} computer exists, that it is discoverable, and that you have sufficient privileges to view performance counter data on that computer. + Не удалось найти на компьютере {0} наборы счетчиков производительности: ошибка {1:x8}. Убедитесь, что компьютер {0} существует, доступен для обнаружения и что у вас есть необходимые привилегии для просмотра данных счетчиков производительности на этом компьютере. - Event cannot be written because there are no events defined with id {0} for the provider {1}. Please correct the event id and try again. + Невозможно записать событие, так как для поставщика {1} не определены события с идентификатором {0}. Исправьте идентификатор события и повторите попытку. - The {0} Context key-value is not a valid SID or NT account name. + Значение ключа Context {0} не является допустимым SID или именем учетной записи NT. - Event cannot be written because the specified version {0} for event {1} is not defined for the provider {2}. Please correct the version and try again. + Невозможно записать событие, так как указанная версия {0} для события {1} не определена для поставщика {2}. Исправьте версию и повторите попытку. - You cannot import more than 32 .blg counter log files in each command. + В каждой команде нельзя импортировать более 32 файлов журнала счетчиков с расширением .blg. - The specified providers do not write events to the {0} log. This log will be ignored. + Указанные поставщики не записывают события в журнал {0}. Этот журнал будет проигнорирован. - The following value is not in a valid security identifier (SID) format: {0}. Enter a valid SID, such as S-1-5-32-544. + Следующее значение имеет недопустимый формат идентификатора безопасности (SID): {0}. Введите допустимый идентификатор безопасности, например S-1-5-32-544. - No provider found with name {0}. + Поставщик с именем {0} не найден. - Cannot retrieve information about the {0} performance counter set because access was denied. + Не удается получить сведения о наборе счетчиков производительности {0} из-за отказа в доступе. - Event cannot be written because multiple events with id {0} have been defined for provider {1}. Please provide a version for the event and try again. + Невозможно записать событие, так как для поставщика {1} определено несколько событий с идентификатором {0}. Укажите версию события и повторите попытку. - The {0} event log file can be read only in the forward chronological order because it is an .etl or an .evt file. To see events from the {0} event log, use the Oldest parameter in the command. + Файл журнала событий {0} можно прочитать только в прямом хронологическом порядке, поскольку это файл формата .etl или .evt. Чтобы просмотреть события из журнала событий {0}, используйте параметр Oldest в команде. - Provider name must be specified. + Должно быть указано имя поставщика. - The {0} file does not appear to be a valid log file. Specify only .evtx, .etl, or .evt files as values of the Path parameter. + Файл {0} не является допустимым файлом журнала. В качестве значений параметра Path указывайте только файлы .evtx, .etl или .evt. - The {0} performance counter path is either not valid or it is not present in the following files: {1}. + Путь к счетчику производительности {0} недопустим или отсутствует в следующих файлах: {1}. Метка времени - The following value is not in a valid DateTime format: {0}. + Следующее значение имеет недопустимый формат даты и времени: {0}. - To access the '{0}' log start PowerShell with elevated user rights. Error: {1} + Чтобы получить доступ к журналу {0}, запустите PowerShell с повышенными правами пользователями. Ошибка: {1} - Access denied for log: '{0}'. + Запрещен доступ к журналу: {0} - Launch PowerShell with elevated user rights. + Запустите PowerShell с повышенными правами пользователя. - Cannot retrieve event message text. + Не удается получить текст сообщения события. - The {0} file already exists. To overwrite this file, use the Force parameter in the Export-Counter command. + Файл {0} уже существует. Чтобы перезаписать этот файл, используйте параметр Force в команде Export-Counter. - The Continuous parameter and the MaxSamples parameter cannot be used in the same command. + Параметры Continuous и MaxSamples нельзя использовать в одной команде. - This cmdlet can be run only on Microsoft Windows 7 and above. + Этот командлет можно запускать только в Microsoft Windows 7 и более поздних версиях. - This PowerShell snap-in contains Windows Eventing and Performance Counter cmdlets. + Эта оснастка PowerShell содержит командлеты для работы с системой событий Windows и счетчиками производительности. - Cannot find any performance counter sets in the {0} files that match the following: {1}. + Не удается найти в файлах {0} ни одного набора счетчиков производительности, соответствующих следующему: {1}. - The specified providers do not write events to any of the specified logs. + Указанные поставщики не записывают события ни в один из указанных журналов. - Cooked Values + Подготовленные значения - You cannot import more than one comma-separated (.csv) or tab-separated (.tsv) performance counter file in each command. + За одну команду нельзя импортировать более одного файла счетчиков производительности в формате с разделителями-запятыми (.csv) или с разделителями-табуляциями (.tsv). - Log count ({0}) is exceeded Windows Event Log API limit ({1}). Adjust filter to return less log names. + Количество журналов ({0}) превышает ограничение API журнала событий Windows ({1}). Настройте фильтр, чтобы возвращалось меньше имен журналов. - Specifies the event logs. Wildcards are permitted. + Определяет журналы событий. Разрешено использовать подстановочные знаки. - Specifies the event logs that this cmdlet gets events from. Wildcards are permitted. + Указывает журналы событий, из которых этот командлет получает события. Разрешено использовать подстановочные знаки. - Specifies the event log providers that this cmdlet gets. + Указывает поставщиков журналов событий, из которых этот командлет получает данные. - Specifies the event log providers from which this cmdlet gets events. + Указывает поставщиков журналов событий, от которых этот командлет получает события. - Specifies the path to the event log files that this cmdlet gets events from. + Указывает путь к файлам журнала событий, из которых этот командлет получает события. - Specifies the maximum number of events that are returned. + Задает максимальное число возвращаемых событий. - Specifies the name of the computer from which this cmdlet gets data. + Указывает имя компьютера, с которого этот командлет получает данные. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Diagnostics/resources/tr/GetEventResources.tr.resx b/src/Microsoft.PowerShell.Commands.Diagnostics/resources/tr/GetEventResources.tr.resx index 0ba635ba01c..81ff119aa7c 100644 --- a/src/Microsoft.PowerShell.Commands.Diagnostics/resources/tr/GetEventResources.tr.resx +++ b/src/Microsoft.PowerShell.Commands.Diagnostics/resources/tr/GetEventResources.tr.resx @@ -118,198 +118,198 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The {0} file does not have the expected file name extension. Specify only .blg, .csv, or .tsv files when you use the Path parameter. + {0} dosyasının beklenen dosya adı uzantısı yok. Yol parametresini kullanırken yalnızca .blg, .csv veya .tsv dosyalarını belirtin. - Internal performance counter API call failed. Error: {0:x8}. + İç performans sayacı API çağrısı başarısız oldu. Hata: {0:x8}. - You must specify at least one Log, Provider or Path key-value pair. + En az bir Günlük, Sağlayıcı veya Yol anahtar-değer çifti belirtmelisiniz. - There is not an event provider on the {0} computer that matches "{1}". + {0} bilgisayarında “{1}” ile eşleşen bir olay sağlayıcısı yok. - A null value was encountered in the {0} hash table key. Null values are not permitted. + {0} karma tablo anahtarında null değerle karşılaşıldı. Null değerlere izin verilmez. - Constructed structured query: + Yapılandırılmış sorgu oluşturuldu: {0}. - The {0} provider writes events to the {1} log. + {0} sağlayıcısı, etkinlikleri {1} günlüğüne yazar. - The value of the StartTime parameter must be less than the value of the EndTime parameter. + StartTime parametresinin değeri, EndTime parametresinin değerinden küçük olmalıdır. - There is not an event log on the {0} computer that matches "{1}". + {0} bilgisayarında "{1}" ile eşleşen bir olay günlüğü yok. Microsoft - The Circular parameter will be ignored unless the MaxSize parameter is also specified. + Circular parametresi, MaxSize parametresi de belirtilmedikçe yoksayılır. - Unable to open the {0} file for writing. + {0} dosyası yazmak için açılamıyor. - Invalid value '{0}' specified for keyword. + Anahtar sözcük için belirtilen '{0}' değeri geçersiz. - The {0} performance counter cannot be exported to the {1} file because it was not part of the first sample set. + {0} performans sayacı, ilk örnek kümesinin parçası olmadığı için {1} dosyasına dışarı aktarılamaz. - No events were found that match the specified selection criteria. + Belirtilen seçim ölçütleriyle eşleşen etkinlik bulunamadı. - The default values for this command failed. Error: {0:x8}. + Bu komutun varsayılan değerleri başarısız oldu. Hata: {0:x8}. - You cannot import different types of performance log files in the same command. Specify only one type of file in the Path parameter. + Aynı komutta farklı türlerde performans günlük dosyalarını içeri aktaramazsınız. Yol parametresinde yalnızca bir dosya türü belirtin. - The {0} path does not appear to be a valid log file path. Specify a valid file system path. + {0} yolu geçerli bir günlük dosyası yolu gibi görünmüyor. Geçerli bir dosya sistemi yolu belirtin. - A valid Event Id must be specified. + Geçerli bir Event Id belirtilmelidir. - Could not retrieve information about the {0} provider. Error: {1}. + {0} sağlayıcısı hakkında bilgi alınamadı. Hata: {1}. - The {0} event log can be read only in the forward chronological order because it is an analytical or a debug log. To see events from the {0} event log, use the Oldest parameter in the command. + Analitik veya hata ayıklama günlüğü olduğu için {0} olay günlüğü yalnızca ileri kronolojik sırayla okunabilir. {0} olay günlüğündeki etkinlikleri görmek için komutta Oldest parametresini kullanın. - The following export destination path is ambiguous: {0}. + Aşağıdaki dışarı aktarma hedef yolu belirsiz: {0}. - The {0} performance counter path is not valid. + {0} performans sayacı yolu geçersiz. - The data in one of the performance counter samples is not valid. View the Status property for each PerformanceCounterSample object to make sure it contains valid data. + Performans sayacı örneklerinden birindeki veri geçersiz. Her PerformanceCounterSample nesnesi için Status özelliğini görüntüleyerek geçerli veri içerdiğinden emin olun. - Provided payload does not match with the template that was defined for event id {0}. -The defined template is following: + Sağlanan yük, {0} olayının için tanımlanan şablonla eşleşmiyor. +Tanımlanan şablon şu şekildedir: {1} - Cannot find any performance counter sets on the {0} computer that match the following: {1}. + {0} bilgisayarında aşağıdakilerle eşleşen hiçbir performans sayacı kümesi bulunamadı: {1}. - No valid counter paths were found in the files. + Dosyalarda geçerli sayaç yolu bulunamadı. - Unable to create the {0} file. Verify that the path is valid. + {0} dosyası oluşturulamadı. Yolun geçerli olduğunu doğrulayın. - Could not find any performance counter sets on the {0} computer: error {1:x8}. Verify that the {0} computer exists, that it is discoverable, and that you have sufficient privileges to view performance counter data on that computer. + {0} bilgisayarında hiçbir performans sayacı kümesi bulunamadı: hata {1:x8}. {0} bilgisayarının var olduğunu, bulunabilir olduğunu ve o bilgisayardaki performans sayacı verilerini görüntülemek için yeterli ayrıcalıklara sahip olduğunuzu doğrulayın. - Event cannot be written because there are no events defined with id {0} for the provider {1}. Please correct the event id and try again. + Sağlayıcı {1} için kimliği {0} olan tanımlı bir olay olmadığından olay yazılamıyor. Lütfen olay kimliğini düzeltin ve yeniden deneyin. - The {0} Context key-value is not a valid SID or NT account name. + {0} Bağlam anahtar-değer çifti geçerli bir SID veya NT hesap adı değil. - Event cannot be written because the specified version {0} for event {1} is not defined for the provider {2}. Please correct the version and try again. + Belirtilen {0} sürümü, {1} olayı için {2} sağlayıcısında tanımlı olmadığından olay yazılamıyor. Lütfen sürümü düzeltin ve yeniden deneyin. - You cannot import more than 32 .blg counter log files in each command. + Her komutta en fazla 32 .blg sayaç günlük dosyasını içeri aktaramazsınız. - The specified providers do not write events to the {0} log. This log will be ignored. + Belirtilen sağlayıcılar {0} günlüğüne olay yazmaz. Bu günlük yoksayılacak. - The following value is not in a valid security identifier (SID) format: {0}. Enter a valid SID, such as S-1-5-32-544. + Aşağıdaki değer geçerli bir güvenlik tanımlayıcısı (sıd) biçiminde değil: {0}. S-1-5-32-544 gibi geçerli bir SID girin. - No provider found with name {0}. + {0} adlı sağlayıcı bulunamadı. - Cannot retrieve information about the {0} performance counter set because access was denied. + Erişim reddedildiği için {0} performans sayacı kümesi hakkında bilgi alınamıyor. - Event cannot be written because multiple events with id {0} have been defined for provider {1}. Please provide a version for the event and try again. + Sağlayıcı {1} için kimliği {0} olan birden çok olay tanımlandığından olay yazılamıyor. Lütfen olay için bir sürüm sağlayın ve yeniden deneyin. - The {0} event log file can be read only in the forward chronological order because it is an .etl or an .evt file. To see events from the {0} event log, use the Oldest parameter in the command. + {0} olay günlüğü dosyası yalnızca ileri kronolojik sırada okunabilir; çünkü bu bir .etl veya .evt dosyasıdır. {0} olay günlüğündeki etkinlikleri görmek için komutta Oldest parametresini kullanın. - Provider name must be specified. + Sağlayıcı adı belirtilmelidir. - The {0} file does not appear to be a valid log file. Specify only .evtx, .etl, or .evt files as values of the Path parameter. + {0} dosyası geçerli bir günlük dosyası gibi görünmüyor. Yalnızca .evtx, .etl veya .evt dosyalarını Path parametresinin değeri olarak belirtin. - The {0} performance counter path is either not valid or it is not present in the following files: {1}. + {0} performans sayacı yolu ya geçerli değil ya da aşağıdaki dosyalarda yok: {1}. Zaman damgası - The following value is not in a valid DateTime format: {0}. + Belirtilen değer geçerli bir Tarih/Saat biçiminde değil: {0}. - To access the '{0}' log start PowerShell with elevated user rights. Error: {1} + ‘{0}' günlüğüne erişmek için PowerShell'i yükseltilmiş kullanıcı haklarıyla başlatın. Hata: {1} - Access denied for log: '{0}'. + Günlük: '{0}' için erişim reddedildi. - Launch PowerShell with elevated user rights. + Windows PowerShell'i yükseltilmiş kullanıcı haklarıyla başlatın. - Cannot retrieve event message text. + Olay iletisi metni alınamıyor. - The {0} file already exists. To overwrite this file, use the Force parameter in the Export-Counter command. + {0} dosyası zaten var. Bu dosyanın üzerine yazmak için Export-Counter komutunda Force parametresini kullanın. - The Continuous parameter and the MaxSamples parameter cannot be used in the same command. + Continuous parametresi ve MaxSamples parametresi aynı komutta kullanılamaz. - This cmdlet can be run only on Microsoft Windows 7 and above. + Bu cmdlet yalnızca Microsoft Windows 7 ve üzeri sürümlerde çalıştırılabilir. - This PowerShell snap-in contains Windows Eventing and Performance Counter cmdlets. + Bu Windows PowerShell ek bileşeni, Windows Eventing ve Performans Sayacı cmdlet'lerini içerir. - Cannot find any performance counter sets in the {0} files that match the following: {1}. + {0} dosyalarında aşağıdakilerle eşleşen hiçbir performans sayacı kümesi bulunamadı: {1}. - The specified providers do not write events to any of the specified logs. + Belirtilen sağlayıcılar, belirtilen günlüklerin hiçbirine etkinlik yazmaz. - Cooked Values + İşlenmiş Değerler - You cannot import more than one comma-separated (.csv) or tab-separated (.tsv) performance counter file in each command. + Her komutta birden fazla virgülle ayrılmış (.csv) veya sekmeyle ayrılmış (.tsv) performans sayacı dosyasını içeri aktaramazsınız. - Log count ({0}) is exceeded Windows Event Log API limit ({1}). Adjust filter to return less log names. + Günlük sayısı ({0}), Windows Event log API sınırını ({1}) aşıyor. Daha az günlük adı döndürecek şekilde filtreyi ayarlayın. - Specifies the event logs. Wildcards are permitted. + Olay günlüklerini belirtir. Joker karakterlere izin verilir. - Specifies the event logs that this cmdlet gets events from. Wildcards are permitted. + Bu cmdlet'in olay aldığı olay günlüklerini belirtir. Joker karakterlere izin verilir. - Specifies the event log providers that this cmdlet gets. + Bu cmdlet'in aldığı olay günlüğü sağlayıcılarını belirtir. - Specifies the event log providers from which this cmdlet gets events. + Bu cmdlet'in olay günlüğü sağlayıcılarını belirtir. - Specifies the path to the event log files that this cmdlet gets events from. + Bu cmdlet'in olayları aldığı olay günlüğü dosyalarının yolunu belirtir. - Specifies the maximum number of events that are returned. + Belirtilen maksimum etkinlik sayısını belirtir. - Specifies the name of the computer from which this cmdlet gets data. + Bu cmdlet'in veri aldığı bilgisayarın adını belirtir. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/de/CmdletizationResources.de.resx b/src/Microsoft.PowerShell.Commands.Management/resources/de/CmdletizationResources.de.resx index b97467043ef..0a358aec3f7 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/de/CmdletizationResources.de.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/de/CmdletizationResources.de.resx @@ -118,54 +118,54 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot find the {0} class on the {1} CIM server. Verify the value of the ClassName xml attribute in Cmdlet Definition XML and retry. Valid class name example: ROOT\cimv2\Win32_Process. + Die {0}-Klasse wurde auf dem {1}-CIM-Server nicht gefunden. Überprüfen Sie den Wert des ClassName-XML-Attributs in der XML-Datei der Cmdlet-Definition, und wiederholen Sie den Vorgang. Beispiel für einen gültigen Klassennamen: ROOT\cimv2\Win32_Process. {StrContains="ClassName"} {StrContains="ROOT\cimv2\Win32_Process"} {0} is a placeholder for a name of a (potentially misspelled) CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". - CIM method {1} on the {0} CIM object + CIM-Methode „{1}“ für das {0}-CIM-Objekt {0} is a placeholder for a CIM path. Example: \\SERVER1\ROOT\cimv2:Win32_Process.Handle="11828" {1} is a placeholder for a CIM method name. Example: Create - Failed to run {1}. {0} + Fehler beim Ausführen von „{1}“. {0} {0} is a placeholder for a generic CIM failure. Example: 'Invalid namespace' or '9' {1} is a placeholder for a description of CIM operation. This most likely comes from CimJob_MethodDescription or CimJob_QueryDescription - Running the following operation: {0}. + Folgender Vorgang wird ausgeführt: {0}. {0} is a placeholder for a description of CIM operation. This most likely comes from CimJob_MethodDescription or CimJob_QueryDescription - CIM cmdlets do not support the {0} parameter together with the AsJob parameter. Remove one of these parameters and retry. + CIM-Cmdlets unterstützen den {0}-Parameter nicht zusammen mit dem AsJob-Parameter. Entfernen Sie einen dieser Parameter, und wiederholen Sie den Vorgang. {StrContains="AsJob"} {0} is a placeholder for 'WhatIf' or 'Confirm' cmdlet parameters - CIM query for instances of the {0} class on the {1} CIM server: {2} + CIM-Abfrage für Instanzen der {0}-Klasse auf dem {1}-CIM-Server: {2} {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". - The CIM method returned the following error code: {0} + Die CIM-Methode hat den folgenden Fehlercode zurückgegeben: {0} {0} is a placeholder for an error code returned from a CIM method. Example: 123 - The {2} CIM method exposed by the {0} class on the {1} CIM server + Die {2}-CIM-Methode, die von der {0}-Klasse auf dem {1}-CIM-Server bereitgestellt wird {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". {2} is a placeholder for a CIM method name. Example: Create - CIM intrinsic type + Systeminterner CIM-Typ - WQL literal + WQL-Literal - Cannot find the {2} output parameter of the {1} method of the {0} CIM object. Verify the value of the ParameterName attribute in Cmdlet Definition XML and retry. + Der {2}-Ausgabeparameter der {1}-Methode des {0}-CIM-Objekts wurde nicht gefunden. Überprüfen Sie den Wert des ParameterName-Attributs in der XML-Datei der Cmdlet-Definition, und wiederholen Sie den Vorgang. {StrContains="ParameterName"} {0} is a placeholder for a CIM path. Example: \\SERVER1\ROOT\cimv2:Win32_Process.Handle="11828" {1} is a placeholder for a name of a (potentially misspelled) CIM method. Example: "Terminate". @@ -173,45 +173,45 @@ - No matching {1} objects found by {0}. Verify query parameters and retry. + Mit „{1}“ wurden keine übereinstimmenden {0}-Objekte gefunden. Bestätigen Sie die Abfrageparameter, und versuchen Sie es noch mal. - No {2} objects found with property '{0}' equal to '{1}'. Verify the value of the property and retry. + Es wurden keine {2}-Objekte mit der Eigenschaft „{0}“ gefunden, die gleich „{1}“ ist. Überprüfen Sie den Wert der Eigenschaft, und wiederholen Sie den Vorgang. - Type of {0} property ({1}) doesn't match the CIM type ({2}) associated with the type declared in Cmdlet Definition XML. + Der Typ der {0}-Eigenschaft ({1}) stimmt nicht mit dem CIM-Typ ({2}) überein, der dem in der XML-Datei der Cmdlet-Definition deklarierten Typ zugeordnet ist. - CIM query for enumerating associated instance of the {0} class on the {1} CIM server + CIM-Abfrage zum Aufzählen zugeordneter Instanzen der {0}-Klasse auf dem {1}-CIM-Server {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". - CIM query for enumerating instances of the {0} class on the {1} CIM server, that are associated with the following instance: {2} + CIM-Abfrage zum Aufzählen von Instanzen der {0}-Klasse auf dem {1}-CIM-Server, die der folgenden Instanz zugeordnet sind: {2} {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". {2} is a placeholder for a string describing a CimInstance. Example: "Win32_Process[Handle=123]". - The {0} command cannot complete, because the {1} server is currently busy. The command will be automatically resumed in {2:f2} seconds. + Der {0}-Befehl kann nicht abgeschlossen werden, da der {1}-Server derzeit ausgelastet ist. Der Befehl wird in {2:f2} Sekunden automatisch fortgesetzt. {0} is a placeholder for a command name. Example: "Get-NetAdapter" {1} is a placeholder for a computer name. Example: "localhost" {2} is a placeholder for a number of seconds. Example: 1.23 - Cannot connect to CIM server. {0} + Es kann keine Verbindung zum CIM-Server hergestellt werden. {0} {0} is a placeholder for a more detailed error message. - The cmdlet does not fully support the Inquire action for debug messages. Cmdlet operation will continue during the prompt. Select a different action preference via -Debug switch or $DebugPreference variable, and try again. + Das Cmdlet unterstützt die Inquire-Aktion für Debugmeldungen nicht vollständig. Der Cmdlet-Vorgang wird während des Prompts fortgesetzt. Wählen Sie über den Schalter „-Debug“ oder die $DebugPreference-Variable eine andere Aktionspräferenz aus, und versuchen Sie es erneut. {StrContains="Debug"} {StrContains="DebugPreference"} {StrContains="Inquire"} - The cmdlet does not fully support the Inquire action for warnings. Cmdlet operation will continue during the prompt. Select a different action preference via -WarningAction parameter or $WarningPreference variable, and try again. + Das Cmdlet unterstützt die Inquire-Aktion für Warnungen nicht vollständig. Der Cmdlet-Vorgang wird während des Prompts fortgesetzt. Wählen Sie über den Parameter „-WarningAction“ oder die $WarningPreference-Variable eine andere Aktionspräferenz aus, und versuchen Sie es erneut. {StrContains="WarningAction"} {StrContains="WarningPreference"} {StrContains="Inquire"} - The cmdlet does not fully support the Stop action for warnings. Cmdlet operation will be stopped with a delay. Select a different action preference via -WarningAction parameter or $WarningPreference variable, and try again. + Das Cmdlet unterstützt die Stop-Aktion für Warnungen nicht vollständig. Der Cmdlet-Vorgang wird mit einer Verzögerung beendet. Wählen Sie über den Parameter „-WarningAction“ oder die $WarningPreference-Variable eine andere Aktionspräferenz aus, und versuchen Sie es erneut. {StrContains="WarningAction"} {StrContains="WarningPreference"} {StrContains="Stop"} @@ -220,11 +220,11 @@ {1} is a placeholder for the original message. Example: "Deleting managed resource" - {0}: A CimSession to the CIM server uses the DCOM protocol, which does not support the {1} switch. + {0}: Eine CimSession mit dem CIM-Server verwendet das DCOM-Protokoll, das den Schalter „{1}“ nicht unterstützt. {0} is a placeholder for a name of a computer {1} is a placeholder for 'Confirm' or 'WhatIf' - No {2} objects found with property '{0}' matching '{1}'. Verify the value of the property and retry. + Es wurden keine {2}-Objekte mit der Eigenschaft „{0}“ gefunden, die „{1}“ entspricht. Überprüfen Sie den Wert der Eigenschaft, und wiederholen Sie den Vorgang. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/de/ComputerResources.de.resx b/src/Microsoft.PowerShell.Commands.Management/resources/de/ComputerResources.de.resx index 0891a9bdd1a..c836e58dccd 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/de/ComputerResources.de.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/de/ComputerResources.de.resx @@ -118,276 +118,276 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - This functionality is not supported on this operating system. + Diese Funktionalität wird auf diesem Betriebssystem nicht unterstützt. - Could not enable drive {0}. + Das Laufwerk „{0}“ konnte nicht aktiviert werden. - The command cannot turn on the restore computer infrastructure on the specified computer because the supplied drive is not valid. Enter a valid drive in the Drive parameter, and then try again. + Der Befehl kann die Infrastruktur für die Systemwiederherstellung auf dem angegebenen Computer nicht aktivieren, da das angegebene Laufwerk ungültig ist. Geben Sie im Parameter „Laufwerk“ ein gültiges Laufwerk an, und versuchen Sie es dann erneut. - Include System Drive in the list of Drives. + Systemlaufwerk in die Laufwerksliste aufnehmen. - The command cannot turn off the restore computer infrastructure because the supplied drive is not valid. Enter a valid drive in the Drive parameter, and then try again. + Der Befehl kann die Infrastruktur für die Systemwiederherstellung nicht deaktivieren, da das angegebene Laufwerk ungültig ist. Geben Sie im Parameter „Laufwerk“ ein gültiges Laufwerk an, und versuchen Sie es dann erneut. - The command cannot disable System Restore on the {0} drive. You may not have sufficient permissions to perform this operation. + Mit diesem Befehl kann die Systemwiederherstellung auf dem {0}-Laufwerk nicht deaktiviert werden. Möglicherweise verfügen Sie nicht über ausreichende Berechtigungen zum Ausführen dieses Vorgangs. - SystemRestore service is disabled. + Der Dienst für die Systemwiederherstellung ist deaktiviert. - The system restore infrastructure cannot create a restore point. + Die Infrastruktur für die Systemwiederherstellung kann keinen Wiederherstellungspunkt erstellen. - The last attempt to restore the computer failed. + Der letzte Versuch, den Computer wiederherzustellen, ist fehlgeschlagen. - The computer has been restored to the specified restore point. + Der Computer wurde auf den angegebenen Wiederherstellungspunkt zurückgesetzt. - The last attempt to restore the computer was interrupted. + Der letzte Versuch, den Computer wiederherzustellen, wurde unterbrochen. - The command cannot locate the "{0}" restore point. Verify the "{0}" sequence number, and then try the command again. + Der Befehl kann den Wiederherstellungspunkt „{0}“ nicht finden. Überprüfen Sie die Sequenznummer „{0}“ und versuchen Sie es dann erneut. {0} ({1}) - Failed to restart the computer {0} with the following error message: {1}. + Der Computer {0} konnte mit der folgenden Fehlermeldung nicht neu gestartet werden: {1}. - This command cannot be run on target computer('{1}') due to following error: {0}.{2} + Dieser Befehl kann auf dem Zielcomputer („{1}“) aufgrund des folgenden Fehlers nicht ausgeführt werden: {0}.{2} - Failed to stop the computer {0} with the following error message: {1}. + Der Computer {0} konnte mit der folgenden Fehlermeldung nicht angehalten werden: {1}. - The command cannot restore the computer because "{0}" has not been set as valid restore point. Enter a valid restore point in the RestorePoint parameter, and then try again. + Der Befehl kann den Computer nicht wiederherstellen, da „{0}“ nicht als gültiger Wiederherstellungspunkt festgelegt wurde. Geben Sie einen gültigen Wiederherstellungspunkt im Parameter „RestorePoint“ an, und versuchen Sie es dann erneut. - The changes will take effect after you restart the computer {1}. + Die Änderungen werden wirksam, nachdem Sie den Computer „{1}“ neu gestartet haben. - After you leave the domain, you will need to know the password of the local Administrator account to log onto this computer. Do you wish to continue? + Nachdem Sie die Domäne verlassen haben, benötigen Sie das Kennwort des lokalen Admin-Kontos, um sich an diesem Computer anzumelden. Möchten Sie den Vorgang fortsetzen? - The following computer name is not valid: {0}. Make sure that the computer name is not longer than 255 characters, that it does not contain two or more consecutive dots, that it does not begin with a dot, that it does not contain only numeric characters, and that it does not contain any of the following characters: + Der folgende Computername ist ungültig: {0}. Stellen Sie sicher, dass der Computername nicht länger als 255 Zeichen ist, nicht zwei oder mehr aufeinanderfolgende Punkte enthält, nicht mit einem Punkt beginnt, nicht nur aus numerischen Zeichen besteht und keines der folgenden Zeichen enthält: {{|}}~[\]^:;<=>?@!"#$%^`()+/, - The domain in computer name '{0}' is not valid. Make sure that the domain exists and that the name is a valid domain name. + Die Domäne im Computernamen „{0}“ ist ungültig. Stellen Sie sicher, dass die Domäne vorhanden ist und dass der Name ein gültiger Domänenname ist. - The value specified for the NewComputerName parameter is the same as the value of the ComputerName parameter. Provide a different value for the NewComputerName parameter. + Der für den Parameter „NewComputerName“ angegebene Wert ist mit dem Wert des Parameters „ComputerName“ identisch. Geben Sie für den Parameter „NewComputerName“ einen anderen Wert an. - "The password of the secure channel between '{0}' and '{1}' has been reset." + „Das Kennwort für den sicheren Kanal zwischen „{0}“ und „{1}“ wurde zurückgesetzt.“ - This command cannot be run due to the following error: the service cannot be started because it is disabled or does not have enabled devices associated with it. + Dieser Befehl kann aufgrund des folgenden Fehlers nicht ausgeführt werden: Der Dienst kann nicht gestartet werden, weil er deaktiviert ist oder keine aktivierten Geräte zugeordnet sind. - Creating a system restore point ... + Ein Systemwiederherstellungspunkt wird erstellt ... - Creating a system restore point... {0}% Completed. + Systemwiederherstellungspunkt wird erstellt... {0}% abgeschlossen. - Completed. + Abgeschlossen. - Try below options and Run the command again. -1. Verify that the target computer('{0}') is running. -2. Specify full computer name of the target computer('{0}'). + Probieren Sie die folgenden Optionen aus, und führen Sie den Befehl erneut aus. +1. Überprüfen Sie, ob der Zielcomputer („{0}“) ausgeführt wird. +2. Geben Sie den vollständigen Computernamen des Zielcomputers („{0}“) an. - Failed to restart the computer {0}. Access rights {1} cannot be enabled for the calling process. + Fehler beim Neustart des Computers „{0}“. Die Zugriffsrechte „{1}“ können für den aufrufenden Prozess nicht aktiviert werden. - Enable the {0} and restart the computer. + Aktivieren Sie die {0} und starten Sie den Computer neu. - Local shutdown access rights + Zugriffsrechte für das lokale Herunterfahren - Remote shutdown access rights + Zugriffsrechte für das Remoteherunterfahren - Cannot wait for the local computer to restart. The local computer is ignored when the Wait parameter is specified. + Auf den Neustart des lokalen Computers kann nicht gewartet werden. Der lokale Computer wird ignoriert, wenn der Parameter „Warte“ angegeben ist. - The parameters Timeout, For, and Delay are valid only when the parameter Wait is specified. + Die Parameter „Timeout“, „Für“ und „Verzögerung“ sind nur gültig, wenn der Parameter „Warte“ angegeben ist. - Restarting computers... + Computer werden neu gestartet... - Restarting computer {0} + Der Computer „{0}“ wird neu gestartet. - Completed: {0}/{1}. + Abgeschlossen: {0}/{1}. - Verifying that the computer has been restarted... + Es wird überprüft, ob der Computer neu gestartet wurde... - Waiting for PowerShell connectivity... + Es wird auf PowerShell-Konnektivität gewartet... - Waiting for the restart to begin... + Es wird auf den Beginn des Neustarts gewartet... - Waiting for WinRM connectivity... + Es wird auf WinRM-Konnektivität gewartet... - Waiting for WMI connectivity... + Es wird auf WMI-Konnektivität gewartet... - Restart is complete + Neustart abgeschlossen - The combined service types are not supported for now. + Die kombinierten Diensttypen werden derzeit nicht unterstützt. - Computer name {0} cannot be resolved with the exception: {1}. + Der Computername {0} kann mit der Ausnahme nicht aufgelöst werden: {1}. - The number of new names is not equal to the number of target computers. + Die Anzahl der neuen Namen entspricht nicht der Anzahl der Zielcomputer. - Skip computer '{0}' with new name '{1}' because the new name is not valid. The new computer name entered is not properly formatted. Standard names may contain letters (a-z, A-Z), numbers (0-9), and hyphens (-), but no spaces or periods (.). The name may not consist entirely of digits, and may not be longer than 63 characters. + Überspringen Sie den Computer „{0}“ mit dem neuen Namen „{1}“, da der neue Name ungültig ist. Der neu eingegebene Computername ist nicht korrekt formatiert. Standardnamen dürfen Buchstaben (a-z, A-Z), Zahlen (0-9) und Bindestriche (-) enthalten, jedoch keine Leerzeichen oder Punkte (.). Der Name darf nicht ausschließlich aus Ziffern bestehen und nicht länger als 63 Zeichen sein. - Skip computer '{0}' with new name '{1}' because the new name is the same as the current name. + Computer „{0}“ mit dem neuen Namen „{1}“ überspringen, da der neue Name mit dem aktuellen Namen identisch ist. - Cannot remove computer '{0}' because it is not in a domain. + Der Computer „{0}“ kann nicht entfernt werden, da er sich nicht in einer Domäne befindet. - Failed to join computer '{0}' to workgroup '{1}' with the following error message: {2} + Der Computer „{0}“ konnte der Arbeitsgruppe „{1}“ mit der folgenden Fehlermeldung nicht beitreten: {2} - Cannot remove computer(s) from the domain because the local network is down. + Computer können nicht aus der Domäne entfernt werden, da das lokale Netzwerk nicht verfügbar ist. - Fail to rename computer '{0}' to '{1}' due to the following exception: {2}. + Fehler beim Umbenennen des Computers „{0}“ in „{1}“ aufgrund der folgenden Ausnahme: {2}. - Join in domain '{0}' + Der Domäne „{0}“ beitreten - Join in workgroup '{0}' + Der Arbeitsgruppe „{0}“ beitreten - Cannot add computer '{0}' to domain '{1}' because it is already in that domain. + Der Computer „{0}“ kann der Domäne „{1}“ nicht hinzugefügt werden, da er bereits Mitglied dieser Domäne ist. - Cannot add computer '{0}' to workgroup '{1}' because it is already in that workgroup. + Der Computer „{0}“ kann der Arbeitsgruppe „{1}“ nicht hinzugefügt werden, da er bereits Mitglied dieser Arbeitsgruppe ist. - Computer '{0}' successfully joined the workgroup '{1}', but could not be renamed to '{2}' with the following error message: {3}. + Der Computer „{0}“ wurde erfolgreich der Arbeitsgruppe „{1}“ hinzugefügt, konnte jedoch mit der folgenden Fehlermeldung nicht in „{2}“ umbenannt werden: {3}. - Computer '{0}' was successfully unjoined from the domain '{1}', but it failed to join the workgroup '{2}' with the following error message: {3}. + Der Computer „{0}“ wurde erfolgreich aus der Domäne „{1}“ entfernt, konnte jedoch der Arbeitsgruppe „{2}“ mit der folgenden Fehlermeldung nicht beitreten: {3}. - Failed to unjoin computer '{0}' from domain '{1}' with the following error message: {2}. + Fehler beim Aufheben der Verknüpfung des Computers „{0}“ mit der Domäne „{1}“ mit der folgenden Fehlermeldung: {2}. - Cannot establish the WMI connection to the computer '{0}' with the following error message: {1}. + Die WMI-Verbindung mit dem Computer „{0}“ kann mit der folgenden Fehlermeldung nicht hergestellt werden: {1}. - Computer '{0}' failed to join domain '{1}' from its current workgroup '{2}' with following error message: {3}. + Der Computer „{0}“ konnte von seiner aktuellen Arbeitsgruppe „{1}“ aus mit der folgenden Fehlermeldung nicht der Domäne „{2}“ beitreten: {3}. - Computer '{0}' was successfully unjoined from domain '{1}', but failed to join the new domain '{2}' with the following error message: {3}. + Der Computer „{0}“ wurde erfolgreich aus der Domäne „{1}“ entfernt, konnte der neuen Domäne „{2}“ jedoch nicht beitreten. Fehlermeldung: {3}. - Computer '{0}' was successfully joined to the new domain '{1}', but renaming it to '{2}' failed with the following error message: {3}. + Der Computer „{0}“ wurde erfolgreich mit der neuen Domäne „{1}“ verbunden, aber beim Umbenennen in „{2}“ ist folgender Fehler aufgetreten: {3}. - The flag '{0}' is valid only if flag '{1}' is specified. + Das Kennzeichen „{0}“ ist nur gültig, wenn das Kennzeichen „{1}“ angegeben ist. - Cannot rename multiple computers. The NewName parameter is valid only if a single computer is specified. + Mehrere Computer können nicht umbenannt werden. Der Parameter „NewName“ ist nur gültig, wenn ein einzelner Computer angegeben wird. - Cannot find the computer account for the local computer in the domain {0}. + Das Computerkonto für den lokalen Computer konnte in der Domäne „{0}“ nicht gefunden werden. - Cannot find the computer account for the local computer from the domain controller {0}. + Das Computerkonto für den lokalen Computer wurde auf dem Domänencontroller {0} nicht gefunden. - Cannot get domain information about the local computer because of the following exception: {0}. + Die Domäneninformationen zum lokalen Computer können aufgrund der folgenden Ausnahme nicht abgerufen werden: {0}. - Cannot reset the secure channel password for the computer account in the domain. Operation failed with the following exception: {0}. + Das Kennwort für den sicheren Kanal für das Computerkonto in der Domäne kann nicht zurückgesetzt werden. Der Vorgang ist mit folgender Ausnahme fehlgeschlagen: {0}. - Resetting the secure channel password for the local computer failed with the following error message: {0}. + Das Zurücksetzen des Kennworts für den sicheren Kanal des lokalen Computers ist mit der folgenden Fehlermeldung fehlgeschlagen: {0}. - Administrator rights are required to reset the secure channel password on the local computer. Access is denied. + Für das Zurücksetzen des Kennworts für den sicheren Kanal auf dem lokalen Computer sind Admin-Rechte erforderlich. Der Zugriff wird verweigert. - Cannot reset the secure channel password for the account of the local computer. The local computer is not currently part of a domain. + Das Kennwort für den sicheren Kanal für das Konto des lokalen Computers kann nicht zurückgesetzt werden. Der lokale Computer ist derzeit kein Mitglied einer Domäne. - The NetBIOS name of the computer is limited to 15 bytes, which is 15 characters in this case. The NetBIOS name will be shortened to "{0}", which may cause conflicts under NetBIOS name resolution. Do you wish to continue? + Der NetBIOS-Name des Computers ist auf 15 Byte begrenzt, was in diesem Fall 15 Zeichen entspricht. Der NetBIOS-Name wird auf „{0}“ gekürzt. Dies kann zu Konflikten bei der NetBIOS-Namensauflösung führen. Möchten Sie den Vorgang fortsetzen? - NetBIOS name will be truncated. + Der NetBIOS-Name wird abgeschnitten. - The specified server name {0} cannot be resolved. + Der angegebene Servername {0} kann nicht aufgelöst werden. - A new system restore point cannot be created because one has already been created within the past {0} minutes. The frequency of restore point creation can be changed by creating the DWORD value 'SystemRestorePointCreationFrequency' under the registry key 'HKLM\Software\Microsoft\Windows NT\CurrentVersion\SystemRestore'. The value of this registry key indicates the necessary time interval (in minutes) between two restore point creation. The default value is 1440 minutes (24 hours). + Es kann kein neuer Systemwiederherstellungspunkt erstellt werden, da innerhalb der letzten {0} Minuten bereits ein Wiederherstellungspunkt erstellt wurde. Die Häufigkeit der Erstellung von Wiederherstellungspunkten kann durch Anlegen des DWORD-Werts „SystemRestorePointCreationFrequency“ unter dem Registrierungsschlüssel „HKLM\Software\Microsoft\Windows NT\CurrentVersion\SystemRestore“ geändert werden. Der Wert dieses Registrierungsschlüssels gibt das erforderliche Zeitintervall (in Minuten) zwischen zwei Wiederherstellungspunkten an. Der Standardwert beträgt 1440 Minuten (24 Stunden). - The Win32_OperatingSystem WMI object cannot be retrieved. + Das WMI-Objekt Win32_OperatingSystem kann nicht abgerufen werden. - The computer {0} is skipped. Fail to retrieve its LastBootUpTime via the WMI service with the following error message: {1}. + Der Computer {0} wird übersprungen. LastBootUpTime konnte über den WMI-Dienst mit der folgenden Fehlermeldung nicht abgerufen werden: {1}. - Cannot verify the secure channel for the local computer. Operation failed with the following exception: {0}. + Der sichere Kanal für den lokalen Computer kann nicht überprüft werden. Der Vorgang ist mit folgender Ausnahme fehlgeschlagen: {0}. - The attempt to repair the secure channel between the local computer and the domain {0} has failed. + Der Versuch, den sicheren Kanal zwischen dem lokalen Computer und der Domäne {0} zu reparieren, ist fehlgeschlagen. - The secure channel between the local computer and the domain {0} was successfully repaired. + Der sichere Kanal zwischen dem lokalen Computer und der Domäne {0} wurde erfolgreich repariert. - The secure channel between the local computer and the domain {0} is in good condition. + Der sichere Kanal zwischen dem lokalen Computer und der Domäne {0} ist intakt. - The secure channel between the local computer and the domain {0} is broken. + Der sichere Kanal zwischen dem lokalen Computer und der Domäne {0} ist beschädigt. - Cannot verify the secure channel password for the local computer. The local computer is not currently part of a domain. + Das Kennwort für den sicheren Kanal für den lokalen Computer kann nicht überprüft werden. Der lokale Computer ist derzeit kein Mitglied einer Domäne. - The operation cannot be performed because the system restore APIs are not supported on the Advanced RISC Machine (ARM) platform. + Der Vorgang kann nicht ausgeführt werden, da die APIs für die Systemwiederherstellung auf der Plattform Advanced RISC Machine (ARM) nicht unterstützt werden. - The computer did not finish restarting within the specified time-out period. + Der Computer wurde nicht innerhalb des angegebenen Zeitlimits neu gestartet. - Cannot validate the time interval for restore point creation. It failed to retrieve the last restore point with the following error message: {0}. + Das Zeitintervall für die Erstellung des Wiederherstellungspunkts kann nicht überprüft werden. Das Abrufen des letzten Wiederherstellungspunkts ist mit der folgenden Fehlermeldung fehlgeschlagen: {0}. - The AsJob Parameter Set is not supported. + Der AsJob-Parametersatz wird nicht unterstützt. - The {0} parameter is not supported for CoreCLR. + Der {0}-Parameter wird für CoreCLR nicht unterstützt. - The required native command 'shutdown' was not found. + Der erforderliche native Befehl „Herunterfahren“ wurde nicht gefunden. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/es/CmdletizationResources.es.resx b/src/Microsoft.PowerShell.Commands.Management/resources/es/CmdletizationResources.es.resx index b97467043ef..ffbc038e776 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/es/CmdletizationResources.es.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/es/CmdletizationResources.es.resx @@ -118,54 +118,54 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot find the {0} class on the {1} CIM server. Verify the value of the ClassName xml attribute in Cmdlet Definition XML and retry. Valid class name example: ROOT\cimv2\Win32_Process. + No se encuentra la clase {0} en el servidor CIM {1}. Compruebe el valor del atributo XML ClassName en xml de definición de cmdlet y vuelva a intentarlo. Ejemplo de nombre de clase válido: ROOT\cimv2\Win32_Process. {StrContains="ClassName"} {StrContains="ROOT\cimv2\Win32_Process"} {0} is a placeholder for a name of a (potentially misspelled) CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". - CIM method {1} on the {0} CIM object + Método CIM {1} en el objeto CIM {0} {0} is a placeholder for a CIM path. Example: \\SERVER1\ROOT\cimv2:Win32_Process.Handle="11828" {1} is a placeholder for a CIM method name. Example: Create - Failed to run {1}. {0} + No se pudo ejecutar {1}. {0} {0} is a placeholder for a generic CIM failure. Example: 'Invalid namespace' or '9' {1} is a placeholder for a description of CIM operation. This most likely comes from CimJob_MethodDescription or CimJob_QueryDescription - Running the following operation: {0}. + Ejecutando la siguiente operación: {0}. {0} is a placeholder for a description of CIM operation. This most likely comes from CimJob_MethodDescription or CimJob_QueryDescription - CIM cmdlets do not support the {0} parameter together with the AsJob parameter. Remove one of these parameters and retry. + Los cmdlets de CIM no admiten el parámetro {0} junto con el parámetro AsJob. Quite uno de estos parámetros y vuelva a intentarlo. {StrContains="AsJob"} {0} is a placeholder for 'WhatIf' or 'Confirm' cmdlet parameters - CIM query for instances of the {0} class on the {1} CIM server: {2} + Consulta CIM para instancias de la clase {0} en el servidor CIM {1}: {2} {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". - The CIM method returned the following error code: {0} + El método CIM devolvió el siguiente código de error: {0} {0} is a placeholder for an error code returned from a CIM method. Example: 123 - The {2} CIM method exposed by the {0} class on the {1} CIM server + El método CIM {2} expuesto por la clase {0} en el servidor CIM {1} {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". {2} is a placeholder for a CIM method name. Example: Create - CIM intrinsic type + Tipo intrínseco CIM - WQL literal + Literal WQL - Cannot find the {2} output parameter of the {1} method of the {0} CIM object. Verify the value of the ParameterName attribute in Cmdlet Definition XML and retry. + No se encuentra el parámetro de salida {2} del método {1} del objeto CIM {0}. Compruebe el valor del atributo ParameterName en el XML de definición de cmdlet e inténtelo de nuevo. {StrContains="ParameterName"} {0} is a placeholder for a CIM path. Example: \\SERVER1\ROOT\cimv2:Win32_Process.Handle="11828" {1} is a placeholder for a name of a (potentially misspelled) CIM method. Example: "Terminate". @@ -173,45 +173,45 @@ - No matching {1} objects found by {0}. Verify query parameters and retry. + No se encontraron objetos coincidentes {1} por {0}. Compruebe los parámetros de consulta y vuelva a intentarlo. - No {2} objects found with property '{0}' equal to '{1}'. Verify the value of the property and retry. + No se encontraron objetos {2} con la propiedad "{0}" igual a "{1}". Compruebe el valor de la propiedad y vuelva a intentarlo. - Type of {0} property ({1}) doesn't match the CIM type ({2}) associated with the type declared in Cmdlet Definition XML. + El tipo de la propiedad {0} ({1}) no coincide con el tipo CIM ({2}) asociado con el tipo declarado en el XML de definición de cmdlet. - CIM query for enumerating associated instance of the {0} class on the {1} CIM server + Consulta CIM para enumerar la instancia asociada de la clase {0} en el servidor CIM {1} {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". - CIM query for enumerating instances of the {0} class on the {1} CIM server, that are associated with the following instance: {2} + Consulta CIM para enumerar instancias de la clase {0} en el servidor CIM {1}, que están asociadas con la siguiente instancia: {2} {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". {2} is a placeholder for a string describing a CimInstance. Example: "Win32_Process[Handle=123]". - The {0} command cannot complete, because the {1} server is currently busy. The command will be automatically resumed in {2:f2} seconds. + No se puede completar el comando {0} porque el servidor {1} está ocupado actualmente. El comando se reanudará automáticamente en {2:f2} segundos. {0} is a placeholder for a command name. Example: "Get-NetAdapter" {1} is a placeholder for a computer name. Example: "localhost" {2} is a placeholder for a number of seconds. Example: 1.23 - Cannot connect to CIM server. {0} + No se puede conectar con el servidor CIM. {0} {0} is a placeholder for a more detailed error message. - The cmdlet does not fully support the Inquire action for debug messages. Cmdlet operation will continue during the prompt. Select a different action preference via -Debug switch or $DebugPreference variable, and try again. + El cmdlet no admite totalmente la acción Inquire para los mensajes de depuración. La operación del cmdlet continuará durante el símbolo del sistema. Seleccione otra preferencia de acción mediante el modificador -Debug o la variable $DebugPreference, e inténtelo de nuevo. {StrContains="Debug"} {StrContains="DebugPreference"} {StrContains="Inquire"} - The cmdlet does not fully support the Inquire action for warnings. Cmdlet operation will continue during the prompt. Select a different action preference via -WarningAction parameter or $WarningPreference variable, and try again. + El cmdlet no admite totalmente la acción Inquire para advertencias. La operación del cmdlet continuará durante el símbolo del sistema. Seleccione otra preferencia de acción a través del parámetro -WarningAction o $WarningPreference variable e inténtelo de nuevo. {StrContains="WarningAction"} {StrContains="WarningPreference"} {StrContains="Inquire"} - The cmdlet does not fully support the Stop action for warnings. Cmdlet operation will be stopped with a delay. Select a different action preference via -WarningAction parameter or $WarningPreference variable, and try again. + El cmdlet no admite por completo la acción Stop para las advertencias. La operación del cmdlet se detendrá con un retraso. Seleccione otra preferencia de acción a través del parámetro -WarningAction o $WarningPreference variable e inténtelo de nuevo. {StrContains="WarningAction"} {StrContains="WarningPreference"} {StrContains="Stop"} @@ -220,11 +220,11 @@ {1} is a placeholder for the original message. Example: "Deleting managed resource" - {0}: A CimSession to the CIM server uses the DCOM protocol, which does not support the {1} switch. + {0}: una CimSession al servidor CIM usa el protocolo DCOM, que no admite el modificador {1}. {0} is a placeholder for a name of a computer {1} is a placeholder for 'Confirm' or 'WhatIf' - No {2} objects found with property '{0}' matching '{1}'. Verify the value of the property and retry. + No se encontraron objetos {2} con la propiedad "{0}" que coincidan con "{1}". Compruebe el valor de la propiedad y vuelva a intentarlo. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/es/ComputerInfoResources.es.resx b/src/Microsoft.PowerShell.Commands.Management/resources/es/ComputerInfoResources.es.resx index 522b61cb43a..8e707527732 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/es/ComputerInfoResources.es.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/es/ComputerInfoResources.es.resx @@ -118,27 +118,27 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Loading operating system information + Cargando información del sistema operativo - Loading hot-patch information + Cargando información de revisión activa - Loading registry information + Cargando información del Registro - Loading BIOS information + Cargando información del BIOS - Loading motherboard information + Cargando información de placa base - Loading Computer information + Cargando información del equipo - Loading processor information + Cargando información del procesador - Loading network adapter information + Cargando información del adaptador de red \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/es/TestConnectionResources.es.resx b/src/Microsoft.PowerShell.Commands.Management/resources/es/TestConnectionResources.es.resx index 8f01dca03fd..cee334bb3b4 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/es/TestConnectionResources.es.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/es/TestConnectionResources.es.resx @@ -118,15 +118,15 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Testing connection to computer '{0}' failed: {1} + Error al probar la conexión con el equipo ''{0}: {1} - Cannot resolve the target name. + No se puede resolver el nombre de destino. - Target IPv4/IPv6 address absent. + Dirección IPv4/IPv6 de destino ausente. - Cannot complete traceroute to destination '{0}': Number of hops required to reach host exceeds MaxHops ({1}). + No se puede completar traceroute al destino "{0}": el número de saltos necesarios para alcanzar el host supera MaxHops ({1}). \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/fr/ComputerInfoResources.fr.resx b/src/Microsoft.PowerShell.Commands.Management/resources/fr/ComputerInfoResources.fr.resx index 522b61cb43a..d33d8bdbabb 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/fr/ComputerInfoResources.fr.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/fr/ComputerInfoResources.fr.resx @@ -118,27 +118,27 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Loading operating system information + Chargement des informations du système d’exploitation - Loading hot-patch information + Chargement des informations du correctif à chaud - Loading registry information + Chargement des informations du registre - Loading BIOS information + Chargement des informations du BIOS - Loading motherboard information + Chargement des informations de la carte mère - Loading Computer information + Chargement des informations de l’ordinateur - Loading processor information + Chargement des informations du processeur - Loading network adapter information + Chargement des informations de la carte réseau \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/fr/ProcessResources.fr.resx b/src/Microsoft.PowerShell.Commands.Management/resources/fr/ProcessResources.fr.resx index 8bd5fe1369d..05c51bb9766 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/fr/ProcessResources.fr.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/fr/ProcessResources.fr.resx @@ -118,19 +118,19 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot find a process with the name "{0}". Verify the process name and call the cmdlet again. + Impossible de trouver un processus portant le nom « {0} ». Vérifiez le nom du processus et appelez de nouveau le cmdlet. - Cannot find a process with the name "{0}". Try running with -Id to search by Id of processes. + Impossible de trouver un processus portant le nom « {0} ». Essayez d’exécuter avec -Id pour rechercher par ID de processus. - This command cannot be run because the debugger cannot be attached to the process "{0} ({1})". Specify another process and Run your command. + Impossible d’exécuter cette commande, car le débogueur ne peut pas être attaché au processus « {0} ({1}) ». Spécifiez un autre processus et exécutez votre commande. - Cannot find a process with the process identifier {1}. + Impossible de trouver un processus avec l’identificateur de processus {1}. - Cannot stop process "{0} ({1})" because of the following error: {2} + Impossible d’arrêter le processus « {0} ({1}) » en raison de l’erreur suivante : {2} {0} ({1}) @@ -139,96 +139,96 @@ {0} {1} - Cannot enumerate the modules of the "{0}" process. + Impossible d’énumérer les modules du processus « {0} ». - Cannot enumerate the file version information of the "{0}" process. + Impossible d’énumérer les informations de version de fichier du processus « {0} ». - Cannot enumerate the modules and the file version information of the "{0}" process. + Impossible d’énumérer les modules et les informations de version de fichier du processus « {0} ». - Are you sure you want to perform the Stop-Process operation on the following item: {0}({1})? + Voulez-vous vraiment effectuer l’opération Stop-Process sur l’élément suivant : {0}({1}) ? - The specified path is not a valid win32 application. Try again with the UseShellExecute. + Le chemin spécifié n’est pas une application win32 valide. Réessayez avec UseShellExecute. - This command stopped operation of "{0} ({1})" because of the following error: {2}. + Cette commande a arrêté l’exécution de « {0} ({1}) » en raison de l’erreur suivante : {2}. - This command cannot be run because Redirection parameters cannot be used with UseShellExecute parameter + Cette commande ne peut pas être exécutée, car les paramètres de redirection ne peuvent pas être utilisés avec le paramètre UseShellExecute - Exception getting "Modules" or "FileVersion": "This feature is not supported for remote computers.". + Exception lors de l’obtention de « Modules » ou « FileVersion » : « Cette fonctionnalité n’est pas prise en charge pour les ordinateurs distants. ». - This command cannot attach the debugger to the process due to {0} because no default debugger is available. + Cette commande ne peut pas attacher le débogueur au processus en raison de {0} car aucun débogueur par défaut n’est disponible. - This command stopped operation because it cannot wait on 'System Idle' process. Specify another process and Run your command again. + Cette commande a arrêté l’opération, car elle ne peut pas attendre le processus « Système inactif ». Spécifiez un autre processus et exécutez de nouveau votre commande. - This command stopped operation because it cannot wait on itself. Specify another process and Run your command again. + Cette commande a arrêté l’opération, car elle ne peut pas se mettre en attente d’elle-même. Spécifiez un autre processus et exécutez de nouveau votre commande. - This command stopped operation because process "{0} ({1})" is not stopped in the specified time-out. + Cette commande a arrêté l’opération, car le processus « {0} ({1}) » ne s’est pas arrêté dans le délai d’expiration spécifié. - This command cannot be run due to the error: {0} + Impossible d’exécuter cette commande en raison de l’erreur : {0} - This command cannot be run because the input "{0}" is not a valid Application. Give a valid application and run your command again. + Impossible d’exécuter cette commande, car la valeur d’entrée « {0} » n’est pas une application valide. Indiquez une application valide et exécutez de nouveau votre commande. - This command cannot be run because either the parameter "{0}" has a value that is not valid or cannot be used with this command. Give a valid input and Run your command again. + Impossible d’exécuter cette commande, car le paramètre « {0} » a une valeur non valide ou ne peut pas être utilisé avec cette commande. Indiquez une entrée valide et exécutez de nouveau votre commande. - This command cannot be run because "{0}" and "{1}" are same. Give different inputs and Run your command again. + Cette commande ne peut pas être exécutée, car « {0} » et « {1} » sont identiques. Indiquez des entrées différentes et exécutez de nouveau votre commande. - This command cannot be run completely because the system cannot find all the information required. + Cette commande ne peut pas être exécutée complètement, car le système ne trouve pas toutes les informations requises. - Failed to retrieve the new process handle: "{0}". The Process object outputted may have some properties and methods that do not work properly. + Échec de la récupération du nouveau descripteur de processus : « {0} ». L’objet Process généré en sortie peut avoir certaines propriétés et méthodes qui ne fonctionnent pas correctement. - This command cannot be run due to error 1783. The possible cause of this error can be using of a non-existing user "{0}". Please give a valid user and run your command again. + Cette commande ne peut pas être exécutée en raison de l’erreur 1783. La cause possible de cette erreur peut être l’utilisation d’un utilisateur inexistant « {0} ». Indiquez un utilisateur valide et exécutez de nouveau votre commande. - Error adding '{0}' to the network: {1} + Erreur lors de l’ajout de « {0} » au réseau : {1} - Error removing '{0}' from the network: {1} + Erreur lors de la suppression de « {0} » du réseau : {1} - Error renaming '{0}': {1} + Erreur lors du changement de nom de « {0} » : {1} - Parameters "{0}" and "{1}" cannot be specified at the same time. + Les paramètres « {0} » et « {1} » ne peuvent pas être spécifiées simultanément. - Cannot debug process "{0} ({1})" because of the following error: {2} + Impossible de déboguer le processus « {0} ({1}) » en raison de l’erreur suivante : {2} L'utilisateur n'a pas accès aux informations demandées. - The specified parameter is not valid. + Le paramètre spécifié n’est pas valide. - The user does not have sufficient privilege. + L’utilisateur ne dispose pas des privilèges suffisants. - Unknown failure. + Échec inconnu. Le chemin d’accès spécifié n’existe pas. - The parameter '{0}' is not supported for the cmdlet '{1}' on this edition of Windows. + Le paramètre « {0} » n’est pas pris en charge pour le cmdlet «{1} » dans cette édition de Windows. - The parameter '{0}' is not supported for the cmdlet '{1}' on this edition of PowerShell. + Le paramètre « {0} » n’est pas pris en charge pour le cmdlet «{1} » dans cette édition de PowerShell. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/fr/TestConnectionResources.fr.resx b/src/Microsoft.PowerShell.Commands.Management/resources/fr/TestConnectionResources.fr.resx index 8f01dca03fd..01bf7e61bea 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/fr/TestConnectionResources.fr.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/fr/TestConnectionResources.fr.resx @@ -118,15 +118,15 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Testing connection to computer '{0}' failed: {1} + Le test de connexion à l’ordinateur « {0} » a échoué : {1} - Cannot resolve the target name. + Impossible de résoudre le nom cible. - Target IPv4/IPv6 address absent. + Adresse IPv4/IPv6 cible absente. - Cannot complete traceroute to destination '{0}': Number of hops required to reach host exceeds MaxHops ({1}). + Impossible d’effectuer le traceroute vers la destination « {0} » : le nombre de sauts requis pour atteindre l’hôte dépasse MaxHops ({1}). \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/fr/TestPathResources.fr.resx b/src/Microsoft.PowerShell.Commands.Management/resources/fr/TestPathResources.fr.resx index 6587c518bcc..6cb3122dea9 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/fr/TestPathResources.fr.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/fr/TestPathResources.fr.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The provided Path argument was null or an empty collection. + L'argument Path fourni était nul ou une collection vide. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/it/CmdletizationResources.it.resx b/src/Microsoft.PowerShell.Commands.Management/resources/it/CmdletizationResources.it.resx index b97467043ef..8587f8ba529 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/it/CmdletizationResources.it.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/it/CmdletizationResources.it.resx @@ -118,54 +118,54 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot find the {0} class on the {1} CIM server. Verify the value of the ClassName xml attribute in Cmdlet Definition XML and retry. Valid class name example: ROOT\cimv2\Win32_Process. + Non è possibile trovare la classe {0} nel server CIM {1}. Verificare il valore dell'attributo XML ClassName nel file XML di definizione del cmdlet e riprovare. Esempio di nome di classe valido: ROOT\cimv2\Win32_Process. {StrContains="ClassName"} {StrContains="ROOT\cimv2\Win32_Process"} {0} is a placeholder for a name of a (potentially misspelled) CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". - CIM method {1} on the {0} CIM object + Metodo CIM {1} sull'oggetto CIM {0} {0} is a placeholder for a CIM path. Example: \\SERVER1\ROOT\cimv2:Win32_Process.Handle="11828" {1} is a placeholder for a CIM method name. Example: Create - Failed to run {1}. {0} + Non è possibile eseguire {1}. {0} {0} is a placeholder for a generic CIM failure. Example: 'Invalid namespace' or '9' {1} is a placeholder for a description of CIM operation. This most likely comes from CimJob_MethodDescription or CimJob_QueryDescription - Running the following operation: {0}. + Esecuzione dell'operazione seguente: {0}. {0} is a placeholder for a description of CIM operation. This most likely comes from CimJob_MethodDescription or CimJob_QueryDescription - CIM cmdlets do not support the {0} parameter together with the AsJob parameter. Remove one of these parameters and retry. + I cmdlet CIM non supportano il parametro {0} insieme al parametro AsJob. Rimuovere uno di questi parametri e riprovare. {StrContains="AsJob"} {0} is a placeholder for 'WhatIf' or 'Confirm' cmdlet parameters - CIM query for instances of the {0} class on the {1} CIM server: {2} + Query CIM per le istanze della classe {0} nel server CIM {1}: {2} {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". - The CIM method returned the following error code: {0} + Il metodo CIM ha restituito il seguente codice errore: {0} {0} is a placeholder for an error code returned from a CIM method. Example: 123 - The {2} CIM method exposed by the {0} class on the {1} CIM server + Metodo CIM {2} esposto dalla classe {0} nel server CIM {1} {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". {2} is a placeholder for a CIM method name. Example: Create - CIM intrinsic type + Tipo intrinseco di CIM - WQL literal + Valore letterale WQL - Cannot find the {2} output parameter of the {1} method of the {0} CIM object. Verify the value of the ParameterName attribute in Cmdlet Definition XML and retry. + Non è possibile trovare il parametro di output {2} del metodo {1} dell'oggetto CIM {0}. Verificare il valore dell'attributo ParameterName nel file XML di definizione del cmdlet e riprovare. {StrContains="ParameterName"} {0} is a placeholder for a CIM path. Example: \\SERVER1\ROOT\cimv2:Win32_Process.Handle="11828" {1} is a placeholder for a name of a (potentially misspelled) CIM method. Example: "Terminate". @@ -173,45 +173,45 @@ - No matching {1} objects found by {0}. Verify query parameters and retry. + Non sono stati trovati oggetti {1} corrispondenti in base a {0}. Verificare i parametri della query e riprovare. - No {2} objects found with property '{0}' equal to '{1}'. Verify the value of the property and retry. + Non sono stati trovati oggetti {2} con la proprietà "{0}" uguali a "{1}". Verificare il valore della proprietà e riprovare. - Type of {0} property ({1}) doesn't match the CIM type ({2}) associated with the type declared in Cmdlet Definition XML. + Il tipo della proprietà {0} ({1}) non corrisponde al tipo CIM ({2}) associato al tipo dichiarato nel file XML di definizione del cmdlet. - CIM query for enumerating associated instance of the {0} class on the {1} CIM server + Query CIM per l'enumerazione dell'istanza associata della classe {0} nel server CIM {1} {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". - CIM query for enumerating instances of the {0} class on the {1} CIM server, that are associated with the following instance: {2} + Query CIM per l'enumerazione delle istanze della classe {0} nel server CIM {1}, associate all'istanza seguente: {2} {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". {2} is a placeholder for a string describing a CimInstance. Example: "Win32_Process[Handle=123]". - The {0} command cannot complete, because the {1} server is currently busy. The command will be automatically resumed in {2:f2} seconds. + Non è possibile completare il comando {0}, perché il server {1} è attualmente occupato. Il comando verrà ripreso automaticamente tra {2:f2} secondi. {0} is a placeholder for a command name. Example: "Get-NetAdapter" {1} is a placeholder for a computer name. Example: "localhost" {2} is a placeholder for a number of seconds. Example: 1.23 - Cannot connect to CIM server. {0} + Non è possibile connettersi al server CIM. {0} {0} is a placeholder for a more detailed error message. - The cmdlet does not fully support the Inquire action for debug messages. Cmdlet operation will continue during the prompt. Select a different action preference via -Debug switch or $DebugPreference variable, and try again. + Il cmdlet non supporta completamente l'azione Inquire per i messaggi di debug. L'operazione del cmdlet continuerà durante il prompt. Selezionare una preferenza di azione diversa tramite l'opzione -Debug o la variabile $DebugPreference e riprovare. {StrContains="Debug"} {StrContains="DebugPreference"} {StrContains="Inquire"} - The cmdlet does not fully support the Inquire action for warnings. Cmdlet operation will continue during the prompt. Select a different action preference via -WarningAction parameter or $WarningPreference variable, and try again. + Il cmdlet non supporta completamente l'azione Inquire per gli avvisi. L'operazione del cmdlet continuerà durante il prompt. Selezionare una preferenza di azione diversa tramite il parametro -WarningAction o la variabile $WarningPreference e riprovare. {StrContains="WarningAction"} {StrContains="WarningPreference"} {StrContains="Inquire"} - The cmdlet does not fully support the Stop action for warnings. Cmdlet operation will be stopped with a delay. Select a different action preference via -WarningAction parameter or $WarningPreference variable, and try again. + Il cmdlet non supporta completamente l'azione Stop per gli avvisi. L'operazione del cmdlet verrà interrotta con un ritardo. Selezionare una preferenza di azione diversa tramite il parametro -WarningAction o la variabile $WarningPreference e riprovare. {StrContains="WarningAction"} {StrContains="WarningPreference"} {StrContains="Stop"} @@ -220,11 +220,11 @@ {1} is a placeholder for the original message. Example: "Deleting managed resource" - {0}: A CimSession to the CIM server uses the DCOM protocol, which does not support the {1} switch. + {0}: un oggetto CimSession per il server CIM utilizza il protocollo DCOM, che non supporta l'opzione {1}. {0} is a placeholder for a name of a computer {1} is a placeholder for 'Confirm' or 'WhatIf' - No {2} objects found with property '{0}' matching '{1}'. Verify the value of the property and retry. + Non sono stati trovati oggetti {2} con la proprietà "{0}" corrispondenti a "{1}". Verificare il valore della proprietà e riprovare. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/ja/CmdletizationResources.ja.resx b/src/Microsoft.PowerShell.Commands.Management/resources/ja/CmdletizationResources.ja.resx index b97467043ef..ed80e7793a0 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/ja/CmdletizationResources.ja.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/ja/CmdletizationResources.ja.resx @@ -118,54 +118,54 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot find the {0} class on the {1} CIM server. Verify the value of the ClassName xml attribute in Cmdlet Definition XML and retry. Valid class name example: ROOT\cimv2\Win32_Process. + {1} CIM サーバーで {0} クラスが見つかりません。 コマンドレット定義 XML の ClassName xml 属性の値を確認してから、再試行してください。有効なクラス名の例: ROOT\cimv2\Win32_Process。 {StrContains="ClassName"} {StrContains="ROOT\cimv2\Win32_Process"} {0} is a placeholder for a name of a (potentially misspelled) CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". - CIM method {1} on the {0} CIM object + {0} CIM オブジェクトに対する CIM メソッド {1} {0} is a placeholder for a CIM path. Example: \\SERVER1\ROOT\cimv2:Win32_Process.Handle="11828" {1} is a placeholder for a CIM method name. Example: Create - Failed to run {1}. {0} + {1} の実行に失敗しました。 {0} {0} is a placeholder for a generic CIM failure. Example: 'Invalid namespace' or '9' {1} is a placeholder for a description of CIM operation. This most likely comes from CimJob_MethodDescription or CimJob_QueryDescription - Running the following operation: {0}. + 次の操作を実行しています: {0}。 {0} is a placeholder for a description of CIM operation. This most likely comes from CimJob_MethodDescription or CimJob_QueryDescription - CIM cmdlets do not support the {0} parameter together with the AsJob parameter. Remove one of these parameters and retry. + CIM コマンドレットは、AsJob パラメーターと共に {0} パラメーターをサポートしていません。 これらのパラメーターのいずれかを削除してから、再試行してください。 {StrContains="AsJob"} {0} is a placeholder for 'WhatIf' or 'Confirm' cmdlet parameters - CIM query for instances of the {0} class on the {1} CIM server: {2} + {1} CIM サーバー上の {0} クラスのインスタンスに対する CIM クエリ: {2} {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". - The CIM method returned the following error code: {0} + CIM メソッドは次のエラー コードを返しました: {0} {0} is a placeholder for an error code returned from a CIM method. Example: 123 - The {2} CIM method exposed by the {0} class on the {1} CIM server + {1} CIM サーバー上の {0} クラスによって公開される {2} CIM メソッド {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". {2} is a placeholder for a CIM method name. Example: Create - CIM intrinsic type + CIM 組み込み型 - WQL literal + WQL リテラル - Cannot find the {2} output parameter of the {1} method of the {0} CIM object. Verify the value of the ParameterName attribute in Cmdlet Definition XML and retry. + {0} CIM オブジェクトの {1} メソッドの {2} 出力パラメーターが見つかりません。 コマンドレット定義 XML の ParameterName 属性の値を確認してから、再試行してください。 {StrContains="ParameterName"} {0} is a placeholder for a CIM path. Example: \\SERVER1\ROOT\cimv2:Win32_Process.Handle="11828" {1} is a placeholder for a name of a (potentially misspelled) CIM method. Example: "Terminate". @@ -173,45 +173,45 @@ - No matching {1} objects found by {0}. Verify query parameters and retry. + 一致する {1}オブジェクトが{0} で見つかりません。クエリ パラメーターを確認してから再試行してください。 - No {2} objects found with property '{0}' equal to '{1}'. Verify the value of the property and retry. + プロパティ ”{0}” が '{1}' と等しい {2} オブジェクトが見つかりませんでした。 プロパティの値を確認してから、再試行してください。 - Type of {0} property ({1}) doesn't match the CIM type ({2}) associated with the type declared in Cmdlet Definition XML. + ”{0}” プロパティの型 ({1}) が、コマンドレット定義 XML で宣言された型に関連付けられている CIM 型 ({2}) と一致しません。 - CIM query for enumerating associated instance of the {0} class on the {1} CIM server + {1} CIM サーバー上の {0} クラスの関連付けられたインスタンスを列挙するための CIM クエリ {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". - CIM query for enumerating instances of the {0} class on the {1} CIM server, that are associated with the following instance: {2} + 次のインスタンスに関連付けられている {1} CIM サーバー上の {0} クラスのインスタンスを列挙するための CIM クエリ: {2} {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". {2} is a placeholder for a string describing a CimInstance. Example: "Win32_Process[Handle=123]". - The {0} command cannot complete, because the {1} server is currently busy. The command will be automatically resumed in {2:f2} seconds. + {1} サーバーが現在ビジー状態であるため、{0} コマンドを完了できません。 コマンドは {2:f2} 秒後に自動的に再開されます。 {0} is a placeholder for a command name. Example: "Get-NetAdapter" {1} is a placeholder for a computer name. Example: "localhost" {2} is a placeholder for a number of seconds. Example: 1.23 - Cannot connect to CIM server. {0} + CIM サーバーに接続できません。{0} {0} is a placeholder for a more detailed error message. - The cmdlet does not fully support the Inquire action for debug messages. Cmdlet operation will continue during the prompt. Select a different action preference via -Debug switch or $DebugPreference variable, and try again. + コマンドレットは、デバッグ メッセージに対する ”Inquire” アクションを完全にサポートしていません。 コマンドレット操作は、プロンプト中に続行されます。 -Debug スイッチまたは $DebugPreference 変数を使用して別のアクション設定を選択してから、もう一度やり直してください。 {StrContains="Debug"} {StrContains="DebugPreference"} {StrContains="Inquire"} - The cmdlet does not fully support the Inquire action for warnings. Cmdlet operation will continue during the prompt. Select a different action preference via -WarningAction parameter or $WarningPreference variable, and try again. + コマンドレットは、警告に対する "Inquire" アクションを完全にサポートしていません。 コマンドレット操作は、プロンプト中に続行されます。 -WarningAction パラメーターまたは $WarningPreference 変数を使用して別のアクション設定を選択してから、もう一度やり直してください。 {StrContains="WarningAction"} {StrContains="WarningPreference"} {StrContains="Inquire"} - The cmdlet does not fully support the Stop action for warnings. Cmdlet operation will be stopped with a delay. Select a different action preference via -WarningAction parameter or $WarningPreference variable, and try again. + コマンドレットは、警告の ”Stop” アクションを完全にサポートしていません。 コマンドレットの操作は遅延して停止されます。 -WarningAction パラメーターまたは $WarningPreference 変数を使用して別のアクション設定を選択してから、もう一度やり直してください。 {StrContains="WarningAction"} {StrContains="WarningPreference"} {StrContains="Stop"} @@ -220,11 +220,11 @@ {1} is a placeholder for the original message. Example: "Deleting managed resource" - {0}: A CimSession to the CIM server uses the DCOM protocol, which does not support the {1} switch. + {0}: CIM サーバーに対する CimSession は、{1} スイッチをサポートしない DCOM プロトコルを使用します。 {0} is a placeholder for a name of a computer {1} is a placeholder for 'Confirm' or 'WhatIf' - No {2} objects found with property '{0}' matching '{1}'. Verify the value of the property and retry. + プロパティ '{0}' が '{1}' と一致する {2} オブジェクトが見つかりませんでした。 プロパティの値を確認してから、再試行してください。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/ja/ComputerResources.ja.resx b/src/Microsoft.PowerShell.Commands.Management/resources/ja/ComputerResources.ja.resx index 0891a9bdd1a..7b1498fea8e 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/ja/ComputerResources.ja.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/ja/ComputerResources.ja.resx @@ -118,276 +118,276 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - This functionality is not supported on this operating system. + この機能は、このオペレーティング システムではサポートされていません。 - Could not enable drive {0}. + ドライブ {0} を有効にできませんでした。 - The command cannot turn on the restore computer infrastructure on the specified computer because the supplied drive is not valid. Enter a valid drive in the Drive parameter, and then try again. + 指定されたドライブが無効なため、指定されたコンピューターの復元コンピューター インフラストラクチャを有効にできません。Drive パラメーターに有効なドライブを入力してから、もう一度やり直してください。 - Include System Drive in the list of Drives. + ドライブの一覧にシステム ドライブを含めます。 - The command cannot turn off the restore computer infrastructure because the supplied drive is not valid. Enter a valid drive in the Drive parameter, and then try again. + 指定されたドライブが無効なため、コンピューターの復元インフラストラクチャを無効にできません。Drive パラメーターに有効なドライブを入力してから、もう一度やり直してください。 - The command cannot disable System Restore on the {0} drive. You may not have sufficient permissions to perform this operation. + コマンドは、{0} ドライブのシステムの復元を無効にできません。この操作を行うための十分なアクセス許可がない可能性があります。 - SystemRestore service is disabled. + SystemRestore サービスが無効になっています。 - The system restore infrastructure cannot create a restore point. + システム復元インフラストラクチャは復元ポイントを作成できません。 - The last attempt to restore the computer failed. + コンピューターを復元する最後の試行に失敗しました。 - The computer has been restored to the specified restore point. + 指定された復元ポイントにコンピューターが復元されました。 - The last attempt to restore the computer was interrupted. + コンピューターを復元する最後の試行が中断されました。 - The command cannot locate the "{0}" restore point. Verify the "{0}" sequence number, and then try the command again. + "{0}" 復元ポイントが見つかりません。"{0}" シーケンス番号を確認してから、コマンドを再試行してください。 {0} ({1}) - Failed to restart the computer {0} with the following error message: {1}. + 次のエラー メッセージで、コンピューター {0} を再起動できませんでした: {1}。 - This command cannot be run on target computer('{1}') due to following error: {0}.{2} + 次のエラーのため、ターゲット コンピューター ('{1}') でこのコマンドを実行できません: {0}。{2} - Failed to stop the computer {0} with the following error message: {1}. + 次のエラー メッセージで、コンピューターの {0} を停止できませんでした: {1}。 - The command cannot restore the computer because "{0}" has not been set as valid restore point. Enter a valid restore point in the RestorePoint parameter, and then try again. + "{0}" が有効な復元ポイントとして設定されていないため、コマンドはコンピューターを復元できません。RestorePoint パラメーターに有効な復元ポイントを入力してから、もう一度やり直してください。 - The changes will take effect after you restart the computer {1}. + 変更は、コンピューター {1} を再起動した後に有効になります。 - After you leave the domain, you will need to know the password of the local Administrator account to log onto this computer. Do you wish to continue? + ドメインを離れた後、このコンピューターにログオンするには、ローカルの Administrator アカウントのパスワードを知っている必要があります。続行しますか? - The following computer name is not valid: {0}. Make sure that the computer name is not longer than 255 characters, that it does not contain two or more consecutive dots, that it does not begin with a dot, that it does not contain only numeric characters, and that it does not contain any of the following characters: + 次のコンピューター名が無効です: {0}。コンピューター名が 255 文字より長くなく、2 つ以上の連続するドットが含まれていないか、ドットで始まらないか、数字のみが含まれていないか、次の文字が含まれていないことを確認してください: {{|}}~[\]^:;<=>?@!"#$%^`()+/, - The domain in computer name '{0}' is not valid. Make sure that the domain exists and that the name is a valid domain name. + コンピューター名 '{0}' のドメインが無効です。ドメインが存在し、名前が有効なドメイン名であることを確認してください。 - The value specified for the NewComputerName parameter is the same as the value of the ComputerName parameter. Provide a different value for the NewComputerName parameter. + NewComputerName パラメーターに指定された値は、ComputerName パラメーターの値と同じです。NewComputerName パラメーターに別の値を指定します。 - "The password of the secure channel between '{0}' and '{1}' has been reset." + "'{0}' と '{1}' の間の安全なチャネルのパスワードがリセットされました。" - This command cannot be run due to the following error: the service cannot be started because it is disabled or does not have enabled devices associated with it. + 次のエラーのため、このコマンドを実行できません: サービスが無効になっているか、有効になっているデバイスが関連付けられていないため、サービスを開始できません。 - Creating a system restore point ... + システムの復元ポイントを作成しています... - Creating a system restore point... {0}% Completed. + システム復元ポイントを作成しています... {0}% 完了しました。 - Completed. + 完了しました。 - Try below options and Run the command again. -1. Verify that the target computer('{0}') is running. -2. Specify full computer name of the target computer('{0}'). + 以下のオプションを試して、コマンドをもう一度実行します。 +1. ターゲット コンピューター ('{0}') が実行されていることを確認します。 +2. ターゲット コンピューターのフル コンピューター名を指定します ('{0}')。 - Failed to restart the computer {0}. Access rights {1} cannot be enabled for the calling process. + コンピューター {0} を再起動できませんでした。呼び出し元のプロセスに対してアクセス権 {1} を有効にすることはできません。 - Enable the {0} and restart the computer. + {0} を有効にし、コンピューターを再起動してください。 - Local shutdown access rights + ローカル シャットダウン アクセス権 - Remote shutdown access rights + リモート シャットダウン アクセス権 - Cannot wait for the local computer to restart. The local computer is ignored when the Wait parameter is specified. + ローカル コンピューターの再起動を待機できません。Wait パラメーターが指定されている場合、ローカル コンピューターは無視されます。 - The parameters Timeout, For, and Delay are valid only when the parameter Wait is specified. + パラメーター Timeout、For、Delay は、パラメーター Wait が指定されている場合にのみ有効です。 - Restarting computers... + コンピューターを再起動しています... - Restarting computer {0} + コンピューター {0} を再起動しています - Completed: {0}/{1}. + 完了済み: {0}/{1}。 - Verifying that the computer has been restarted... + コンピューターが再起動されたことを確認しています... - Waiting for PowerShell connectivity... + PowerShell 接続を待機しています... - Waiting for the restart to begin... + 再起動の開始を待機しています... - Waiting for WinRM connectivity... + WinRM 接続を待機しています... - Waiting for WMI connectivity... + WMI 接続を待機しています... - Restart is complete + 再起動が完了しました - The combined service types are not supported for now. + 現時点では、結合されたサービスの種類はサポートされていません。 - Computer name {0} cannot be resolved with the exception: {1}. + コンピューター名 {0} を解決できません。例外: {1}。 - The number of new names is not equal to the number of target computers. + 新しい名前の数がターゲット コンピューターの数と同じではありません。 - Skip computer '{0}' with new name '{1}' because the new name is not valid. The new computer name entered is not properly formatted. Standard names may contain letters (a-z, A-Z), numbers (0-9), and hyphens (-), but no spaces or periods (.). The name may not consist entirely of digits, and may not be longer than 63 characters. + 新しい名前が無効なため、新しい名前 '{1}' のコンピューター '{0}' をスキップします。入力された新しいコンピューター名の形式が正しくありません。標準名には、文字 (a から z、A から Z)、数字 (0 から 9)、ハイフン (-) を含めることができますが、スペースやピリオド (.) は使用できません。名前は完全には数字で構成されず、63 文字を超えてはなりません。 - Skip computer '{0}' with new name '{1}' because the new name is the same as the current name. + 新しい名前が現在の名前と同じであるため、新しい名前 '{1}' のコンピューター '{0}' をスキップします。 - Cannot remove computer '{0}' because it is not in a domain. + ドメインに存在しないため、コンピューター '{0}' を削除できません。 - Failed to join computer '{0}' to workgroup '{1}' with the following error message: {2} + 次のエラー メッセージにより、コンピューター '{0}' をワークグループ '{1}' に参加できませんでした: {2} - Cannot remove computer(s) from the domain because the local network is down. + ローカル ネットワークがダウンしているため、ドメインからコンピューターを削除できません。 - Fail to rename computer '{0}' to '{1}' due to the following exception: {2}. + 次の例外により、コンピューター '{0}' の名前を '{1}' に変更できませんでした: {2}。 - Join in domain '{0}' + ドメイン '{0}' に参加する - Join in workgroup '{0}' + ワークグループ '{0}' に参加する - Cannot add computer '{0}' to domain '{1}' because it is already in that domain. + コンピューター '{0}' をドメイン '{1}' に追加できません。コンピューターは既にそのドメインに存在します。 - Cannot add computer '{0}' to workgroup '{1}' because it is already in that workgroup. + コンピューター '{0}' をワークグループ '{1}' に追加できません。このコンピューターは既にそのワークグループに存在します。 - Computer '{0}' successfully joined the workgroup '{1}', but could not be renamed to '{2}' with the following error message: {3}. + コンピューター '{0}' はワークグループ '{1}' に正常に参加しましたが、'{2}' に名前を変更できませんでした。エラー メッセージ: {3}。 - Computer '{0}' was successfully unjoined from the domain '{1}', but it failed to join the workgroup '{2}' with the following error message: {3}. + コンピューター '{0}' はドメイン '{1}' から正常に参加しませんでしたが、ワークグループ '{2}' に参加できませんでした。エラー メッセージ: {3}。 - Failed to unjoin computer '{0}' from domain '{1}' with the following error message: {2}. + ドメイン '{1}' からコンピューター '{0}' の参加を解除できませんでした。エラー メッセージ: {2}。 - Cannot establish the WMI connection to the computer '{0}' with the following error message: {1}. + 次のエラー メッセージにより、コンピューター '{0}' への WMI 接続を確立できません: {1}。 - Computer '{0}' failed to join domain '{1}' from its current workgroup '{2}' with following error message: {3}. + コンピューター '{0}' は、現在のワークグループ '{2}' からドメイン '{1}' に参加できませんでした。エラー メッセージ: {3}。 - Computer '{0}' was successfully unjoined from domain '{1}', but failed to join the new domain '{2}' with the following error message: {3}. + コンピューター '{0}' はドメイン '{1}' から正常に参加しませんでしたが、新しいドメイン '{2}' に参加できませんでした。エラー メッセージ: {3}。 - Computer '{0}' was successfully joined to the new domain '{1}', but renaming it to '{2}' failed with the following error message: {3}. + コンピューター '{0}' は新しいドメイン '{1}' に正常に参加しましたが、名前を '{2}' に変更できませんでした。エラー メッセージ: {3}。 - The flag '{0}' is valid only if flag '{1}' is specified. + フラグ '{0}' は、フラグ '{1}' が指定されている場合にのみ有効です。 - Cannot rename multiple computers. The NewName parameter is valid only if a single computer is specified. + 複数のコンピューターの名前を変更することはできません。NewName パラメーターは、1 台のコンピューターが指定されている場合にのみ有効です。 - Cannot find the computer account for the local computer in the domain {0}. + ドメイン {0} 内にローカル コンピューターのコンピューター アカウントが見つかりません。 - Cannot find the computer account for the local computer from the domain controller {0}. + ドメイン コントローラー {0} からローカル コンピューターのコンピューター アカウントが見つかりません。 - Cannot get domain information about the local computer because of the following exception: {0}. + 次の例外のため、ローカル コンピューターに関するドメイン情報を取得できません: {0}。 - Cannot reset the secure channel password for the computer account in the domain. Operation failed with the following exception: {0}. + ドメイン内のコンピューター アカウントの安全なチャネル パスワードをリセットできません。次の例外により、操作は失敗しました: {0}。 - Resetting the secure channel password for the local computer failed with the following error message: {0}. + ローカル コンピューターの安全なチャネル パスワードをリセットできませんでした。エラー メッセージ: {0}。 - Administrator rights are required to reset the secure channel password on the local computer. Access is denied. + ローカル コンピューターの安全なチャネル パスワードをリセットするには、管理者権限が必要です。アクセスは拒否されました。 - Cannot reset the secure channel password for the account of the local computer. The local computer is not currently part of a domain. + ローカル コンピューターのアカウントの安全なチャネル パスワードをリセットできません。ローカル コンピューターは現在ドメインの一部ではありません。 - The NetBIOS name of the computer is limited to 15 bytes, which is 15 characters in this case. The NetBIOS name will be shortened to "{0}", which may cause conflicts under NetBIOS name resolution. Do you wish to continue? + コンピューターの NetBIOS 名は 15 バイトに制限されています。この場合は 15 文字です。NetBIOS 名は "{0}" に短縮され、NetBIOS 名解決で競合が発生する可能性があります。続行しますか? - NetBIOS name will be truncated. + NetBIOS 名は切り捨てられます。 - The specified server name {0} cannot be resolved. + 指定されたサーバー名 {0} を解決できません。 - A new system restore point cannot be created because one has already been created within the past {0} minutes. The frequency of restore point creation can be changed by creating the DWORD value 'SystemRestorePointCreationFrequency' under the registry key 'HKLM\Software\Microsoft\Windows NT\CurrentVersion\SystemRestore'. The value of this registry key indicates the necessary time interval (in minutes) between two restore point creation. The default value is 1440 minutes (24 hours). + 過去 {0} 分以内に既に作成されているため、新しいシステム復元ポイントを作成できません。復元ポイントの作成頻度は、レジストリ キー 'HKLM\Software\Microsoft\Windows NT\CurrentVersion\SystemRestore' の下に DWORD 値 'SystemRestorePointCreationFrequency' を作成することで変更できます。このレジストリ キーの値は、2 つの復元ポイントの作成の間に必要な時間間隔 (分単位) を示します。既定値は 1440 分 (24 時間) です。 - The Win32_OperatingSystem WMI object cannot be retrieved. + Win32_OperatingSystem WMI オブジェクトを取得できません。 - The computer {0} is skipped. Fail to retrieve its LastBootUpTime via the WMI service with the following error message: {1}. + コンピューター {0} はスキップされます。WMI サービス経由で LastBootUpTime を取得できませんでした。エラー メッセージ: {1}。 - Cannot verify the secure channel for the local computer. Operation failed with the following exception: {0}. + ローカル コンピューターの安全なチャネルを確認できません。次の例外により、操作は失敗しました: {0}。 - The attempt to repair the secure channel between the local computer and the domain {0} has failed. + ローカル コンピューターとドメイン {0} の間の安全なチャネルを修復できませんでした。 - The secure channel between the local computer and the domain {0} was successfully repaired. + ローカル コンピューターとドメイン {0} の間の安全なチャネルが正常に修復されました。 - The secure channel between the local computer and the domain {0} is in good condition. + ローカル コンピューターとドメイン {0} の間の安全なチャネルは良好な状態です。 - The secure channel between the local computer and the domain {0} is broken. + ローカル コンピューターとドメイン {0} の間の安全なチャネルが壊れています。 - Cannot verify the secure channel password for the local computer. The local computer is not currently part of a domain. + ローカル コンピューターの安全なチャネル パスワードを確認できません。ローカル コンピューターは現在ドメインの一部ではありません。 - The operation cannot be performed because the system restore APIs are not supported on the Advanced RISC Machine (ARM) platform. + システム復元 API が Advanced RISC Machine (ARM) プラットフォームでサポートされていないため、操作を実行できません。 - The computer did not finish restarting within the specified time-out period. + 指定されたタイムアウト期間内にコンピューターの再起動が完了しませんでした。 - Cannot validate the time interval for restore point creation. It failed to retrieve the last restore point with the following error message: {0}. + 復元ポイントの作成の時間間隔を検証できません。次のエラー メッセージで最後の復元ポイントを取得できませんでした: {0}。 - The AsJob Parameter Set is not supported. + AsJob パラメーター セットはサポートされていません。 - The {0} parameter is not supported for CoreCLR. + {0} パラメーターは CoreCLR ではサポートされていません。 - The required native command 'shutdown' was not found. + 必須のネイティブ コマンド 'shutdown' が見つかりませんでした。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/ja/TestConnectionResources.ja.resx b/src/Microsoft.PowerShell.Commands.Management/resources/ja/TestConnectionResources.ja.resx index 8f01dca03fd..b7b97d29b95 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/ja/TestConnectionResources.ja.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/ja/TestConnectionResources.ja.resx @@ -118,15 +118,15 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Testing connection to computer '{0}' failed: {1} + コンピューター '{0}' への接続のテストに失敗しました: {1} - Cannot resolve the target name. + ターゲット名を解決できません。 - Target IPv4/IPv6 address absent. + ターゲット IPv4/IPv6 アドレスがありません。 - Cannot complete traceroute to destination '{0}': Number of hops required to reach host exceeds MaxHops ({1}). + 宛先 '{0}' への traceroute を完了できません: ホストに到達するために必要なホップ数が MaxHops ({1})を超えています。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/pl/CmdletizationResources.pl.resx b/src/Microsoft.PowerShell.Commands.Management/resources/pl/CmdletizationResources.pl.resx index b97467043ef..904b105ed34 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/pl/CmdletizationResources.pl.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/pl/CmdletizationResources.pl.resx @@ -118,54 +118,54 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot find the {0} class on the {1} CIM server. Verify the value of the ClassName xml attribute in Cmdlet Definition XML and retry. Valid class name example: ROOT\cimv2\Win32_Process. + Nie można odnaleźć klasy {0} na serwerze {1} modelu wspólnych informacji. Sprawdź wartość atrybutu XML ClassName w pliku XML definicji polecenia cmdlet i spróbuj ponownie. Prawidłowy przykład nazwy klasy: ROOT\cimv2\Win32_Process. {StrContains="ClassName"} {StrContains="ROOT\cimv2\Win32_Process"} {0} is a placeholder for a name of a (potentially misspelled) CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". - CIM method {1} on the {0} CIM object + Metoda {1} modelu wspólnych informacji w obiekcie {0} modelu wspólnych informacji {0} is a placeholder for a CIM path. Example: \\SERVER1\ROOT\cimv2:Win32_Process.Handle="11828" {1} is a placeholder for a CIM method name. Example: Create - Failed to run {1}. {0} + Uruchamianie {1} nie powiodło się. {0} {0} is a placeholder for a generic CIM failure. Example: 'Invalid namespace' or '9' {1} is a placeholder for a description of CIM operation. This most likely comes from CimJob_MethodDescription or CimJob_QueryDescription - Running the following operation: {0}. + Uruchamianie następującej operacji: {0}. {0} is a placeholder for a description of CIM operation. This most likely comes from CimJob_MethodDescription or CimJob_QueryDescription - CIM cmdlets do not support the {0} parameter together with the AsJob parameter. Remove one of these parameters and retry. + Polecenia cmdlet modelu wspólnych informacji nie obsługują parametru {0} razem z parametrem AsJob. Usuń jeden z tych parametrów i spróbuj ponownie. {StrContains="AsJob"} {0} is a placeholder for 'WhatIf' or 'Confirm' cmdlet parameters - CIM query for instances of the {0} class on the {1} CIM server: {2} + Zapytanie modelu wspólnych informacji dla wystąpień klasy {0} na serwerze {1} modelu wspólnych informacji: {2} {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". - The CIM method returned the following error code: {0} + Metoda modelu wspólnych informacji zwróciła następujący kod błędu: {0} {0} is a placeholder for an error code returned from a CIM method. Example: 123 - The {2} CIM method exposed by the {0} class on the {1} CIM server + Metoda {2} modelu wspólnych informacji uwidaczniana przez klasę {0} na serwerze {1} modelu wspólnych informacji {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". {2} is a placeholder for a CIM method name. Example: Create - CIM intrinsic type + Typ wewnętrzny modelu wspólnych informacji - WQL literal + Literał WQL - Cannot find the {2} output parameter of the {1} method of the {0} CIM object. Verify the value of the ParameterName attribute in Cmdlet Definition XML and retry. + Nie można odnaleźć parametru wyjściowego {2} metody {1}dla obiektu {0} modelu wspólnych informacji. Sprawdź wartość atrybutu ParameterName w pliku XML definicji polecenia cmdlet i ponów próbę. {StrContains="ParameterName"} {0} is a placeholder for a CIM path. Example: \\SERVER1\ROOT\cimv2:Win32_Process.Handle="11828" {1} is a placeholder for a name of a (potentially misspelled) CIM method. Example: "Terminate". @@ -173,45 +173,45 @@ - No matching {1} objects found by {0}. Verify query parameters and retry. + Nie znaleziono pasujących obiektów {1} według {0}. Sprawdź parametry zapytania i spróbuj ponownie. - No {2} objects found with property '{0}' equal to '{1}'. Verify the value of the property and retry. + Nie znaleziono obiektów {2} o właściwości „{0}” równej „{1}”. Sprawdź wartość właściwości i spróbuj ponownie. - Type of {0} property ({1}) doesn't match the CIM type ({2}) associated with the type declared in Cmdlet Definition XML. + Typ właściwości {0} ({1}) nie jest zgodny z typem modelu wspólnych informacji ({2}) skojarzonym z typem zadeklarowanym w kodzie XML definicji polecenia cmdlet. - CIM query for enumerating associated instance of the {0} class on the {1} CIM server + Zapytanie modelu wspólnych informacji dotyczące wyliczania skojarzonego wystąpienia klasy {0} na serwerze {1} modelu wspólnych informacji {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". - CIM query for enumerating instances of the {0} class on the {1} CIM server, that are associated with the following instance: {2} + Zapytanie modelu wspólnych informacji dotyczące wyliczania wystąpień klasy {0} na serwerze modelu wspólnych informacji {1} skojarzonych z następującym wystąpieniem: {2} {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". {2} is a placeholder for a string describing a CimInstance. Example: "Win32_Process[Handle=123]". - The {0} command cannot complete, because the {1} server is currently busy. The command will be automatically resumed in {2:f2} seconds. + Nie można ukończyć polecenia {0}, ponieważ serwer {1} jest obecnie zajęty. Polecenie zostanie automatycznie wznowione za {2:f2} s. {0} is a placeholder for a command name. Example: "Get-NetAdapter" {1} is a placeholder for a computer name. Example: "localhost" {2} is a placeholder for a number of seconds. Example: 1.23 - Cannot connect to CIM server. {0} + Nie można nawiązać połączenia z serwerem modelu wspólnych informacji. {0} {0} is a placeholder for a more detailed error message. - The cmdlet does not fully support the Inquire action for debug messages. Cmdlet operation will continue during the prompt. Select a different action preference via -Debug switch or $DebugPreference variable, and try again. + Polecenie cmdlet nie obsługuje w pełni akcji Inquire dla komunikatów debugowania. Operacja polecenia cmdlet będzie kontynuowana podczas monitowania. Wybierz inną preferencję akcji za pomocą przełącznika -Debug lub zmiennej $DebugPreference, a następnie spróbuj ponownie. {StrContains="Debug"} {StrContains="DebugPreference"} {StrContains="Inquire"} - The cmdlet does not fully support the Inquire action for warnings. Cmdlet operation will continue during the prompt. Select a different action preference via -WarningAction parameter or $WarningPreference variable, and try again. + Polecenie cmdlet nie obsługuje w pełni akcji Inquire dla ostrzeżeń. Operacja polecenia cmdlet będzie kontynuowana podczas monitowania. Wybierz inną preferencję akcji za pomocą parametru -WarningAction lub zmiennej $WarningPreference, a następnie spróbuj ponownie. {StrContains="WarningAction"} {StrContains="WarningPreference"} {StrContains="Inquire"} - The cmdlet does not fully support the Stop action for warnings. Cmdlet operation will be stopped with a delay. Select a different action preference via -WarningAction parameter or $WarningPreference variable, and try again. + Polecenie cmdlet nie obsługuje w pełni akcji Stop dla ostrzeżeń. Operacja polecenia cmdlet zostanie zatrzymana z opóźnieniem. Wybierz inną preferencję akcji za pomocą parametru -WarningAction lub zmiennej $WarningPreference, a następnie spróbuj ponownie. {StrContains="WarningAction"} {StrContains="WarningPreference"} {StrContains="Stop"} @@ -220,11 +220,11 @@ {1} is a placeholder for the original message. Example: "Deleting managed resource" - {0}: A CimSession to the CIM server uses the DCOM protocol, which does not support the {1} switch. + {0}: Element CimSession do serwera modelu wspólnych informacji używa protokołu DCOM, który nie obsługuje przełącznika {1}. {0} is a placeholder for a name of a computer {1} is a placeholder for 'Confirm' or 'WhatIf' - No {2} objects found with property '{0}' matching '{1}'. Verify the value of the property and retry. + Nie {2} znaleziono obiektów z właściwością „{0}” zgodną z „{1}”. Sprawdź wartość właściwości i spróbuj ponownie. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/ru/CmdletizationResources.ru.resx b/src/Microsoft.PowerShell.Commands.Management/resources/ru/CmdletizationResources.ru.resx index b97467043ef..036cede3a8b 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/ru/CmdletizationResources.ru.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/ru/CmdletizationResources.ru.resx @@ -118,54 +118,54 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot find the {0} class on the {1} CIM server. Verify the value of the ClassName xml attribute in Cmdlet Definition XML and retry. Valid class name example: ROOT\cimv2\Win32_Process. + Не удается найти {0} класс на сервере CIM {1}. Проверьте значение атрибута XML ClassName в XML-файле определения командлета и повторите попытку. Пример допустимого имени класса: ROOT\cimv2\Win32_Process. {StrContains="ClassName"} {StrContains="ROOT\cimv2\Win32_Process"} {0} is a placeholder for a name of a (potentially misspelled) CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". - CIM method {1} on the {0} CIM object + Метод CIM {1} на объекте CIM {0} {0} is a placeholder for a CIM path. Example: \\SERVER1\ROOT\cimv2:Win32_Process.Handle="11828" {1} is a placeholder for a CIM method name. Example: Create - Failed to run {1}. {0} + Не удалось запустить {1}. {0} {0} is a placeholder for a generic CIM failure. Example: 'Invalid namespace' or '9' {1} is a placeholder for a description of CIM operation. This most likely comes from CimJob_MethodDescription or CimJob_QueryDescription - Running the following operation: {0}. + Выполняется следующая операция: {0}. {0} is a placeholder for a description of CIM operation. This most likely comes from CimJob_MethodDescription or CimJob_QueryDescription - CIM cmdlets do not support the {0} parameter together with the AsJob parameter. Remove one of these parameters and retry. + Командлеты CIM не поддерживают параметр {0} вместе с параметром AsJob. Удалите один из этих параметров и повторите попытку. {StrContains="AsJob"} {0} is a placeholder for 'WhatIf' or 'Confirm' cmdlet parameters - CIM query for instances of the {0} class on the {1} CIM server: {2} + Запрос CIM для экземпляров класса {0} на сервере CIM {1}: {2} {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". - The CIM method returned the following error code: {0} + Метод CIM вернул следующий код ошибки: {0} {0} is a placeholder for an error code returned from a CIM method. Example: 123 - The {2} CIM method exposed by the {0} class on the {1} CIM server + Метод CIM {2}, предоставляемый классом {0} на сервере CIM {1} {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". {2} is a placeholder for a CIM method name. Example: Create - CIM intrinsic type + Внутренний тип CIM - WQL literal + Литерал WQL - Cannot find the {2} output parameter of the {1} method of the {0} CIM object. Verify the value of the ParameterName attribute in Cmdlet Definition XML and retry. + Не удается найти выходной параметр {2} метода {1} объекта CIM {0}. Проверьте значение атрибута ParameterName в XML-файле определения командлета и повторите попытку. {StrContains="ParameterName"} {0} is a placeholder for a CIM path. Example: \\SERVER1\ROOT\cimv2:Win32_Process.Handle="11828" {1} is a placeholder for a name of a (potentially misspelled) CIM method. Example: "Terminate". @@ -173,45 +173,45 @@ - No matching {1} objects found by {0}. Verify query parameters and retry. + Соответствующие объекты {1} не найдены по запросу {0}. Проверьте параметры запроса и повторите попытку. - No {2} objects found with property '{0}' equal to '{1}'. Verify the value of the property and retry. + Не найдены объекты {2} со свойством {0}, равным {1}. Проверьте значение свойства и повторите попытку. - Type of {0} property ({1}) doesn't match the CIM type ({2}) associated with the type declared in Cmdlet Definition XML. + Тип свойства {0} ({1}) не соответствует типу CIM ({2}), связанному с типом, объявленным в XML определения командлета. - CIM query for enumerating associated instance of the {0} class on the {1} CIM server + Запрос CIM для перечисления связанного экземпляра класса {0} на сервере CIM {1} {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". - CIM query for enumerating instances of the {0} class on the {1} CIM server, that are associated with the following instance: {2} + Запрос CIM для перечисления экземпляров класса {0} на {1} сервере CIM, связанных со следующим экземпляром: {2} {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". {2} is a placeholder for a string describing a CimInstance. Example: "Win32_Process[Handle=123]". - The {0} command cannot complete, because the {1} server is currently busy. The command will be automatically resumed in {2:f2} seconds. + Не удается выполнить команду {0}, так как сервер {1} сейчас занят. Выполнение команды будет автоматически возобновлено через {2:f2} секунды. {0} is a placeholder for a command name. Example: "Get-NetAdapter" {1} is a placeholder for a computer name. Example: "localhost" {2} is a placeholder for a number of seconds. Example: 1.23 - Cannot connect to CIM server. {0} + Не удается подключиться к серверу CIM. {0} {0} is a placeholder for a more detailed error message. - The cmdlet does not fully support the Inquire action for debug messages. Cmdlet operation will continue during the prompt. Select a different action preference via -Debug switch or $DebugPreference variable, and try again. + Командлет не полностью поддерживает действие Inquire для сообщений отладки. Во время запроса выполнение командлета будет продолжено. Выберите другой вариант действия с помощью параметра -Debug или переменной $DebugPreference и повторите попытку. {StrContains="Debug"} {StrContains="DebugPreference"} {StrContains="Inquire"} - The cmdlet does not fully support the Inquire action for warnings. Cmdlet operation will continue during the prompt. Select a different action preference via -WarningAction parameter or $WarningPreference variable, and try again. + Командлет не полностью поддерживает действие Inquire для предупреждений. Во время запроса выполнение командлета будет продолжено. Выберите другой параметр действия с помощью параметра -WarningAction или переменной $WarningPreference и повторите попытку. {StrContains="WarningAction"} {StrContains="WarningPreference"} {StrContains="Inquire"} - The cmdlet does not fully support the Stop action for warnings. Cmdlet operation will be stopped with a delay. Select a different action preference via -WarningAction parameter or $WarningPreference variable, and try again. + Командлет не полностью поддерживает действие Stop для предупреждений. Работа командлета будет остановлена с задержкой. Выберите другой параметр действия с помощью параметра -WarningAction или переменной $WarningPreference и повторите попытку. {StrContains="WarningAction"} {StrContains="WarningPreference"} {StrContains="Stop"} @@ -220,11 +220,11 @@ {1} is a placeholder for the original message. Example: "Deleting managed resource" - {0}: A CimSession to the CIM server uses the DCOM protocol, which does not support the {1} switch. + {0}: сеанс CimSession на сервере CIM использует протокол DCOM, который не поддерживает переключатель {1}. {0} is a placeholder for a name of a computer {1} is a placeholder for 'Confirm' or 'WhatIf' - No {2} objects found with property '{0}' matching '{1}'. Verify the value of the property and retry. + Не найдены объекты {2} со свойством {0}, соответствующим {1}. Проверьте значение свойства и повторите попытку. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/ru/ComputerInfoResources.ru.resx b/src/Microsoft.PowerShell.Commands.Management/resources/ru/ComputerInfoResources.ru.resx index 522b61cb43a..9827911ed2e 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/ru/ComputerInfoResources.ru.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/ru/ComputerInfoResources.ru.resx @@ -118,27 +118,27 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Loading operating system information + Загрузка сведений об операционной системе - Loading hot-patch information + Загрузка сведений о горячем исправлении - Loading registry information + Загрузка сведений о реестре - Loading BIOS information + Загрузка сведений о BIOS - Loading motherboard information + Загрузка сведений о системной плате - Loading Computer information + Загрузка сведений о компьютере - Loading processor information + Загрузка сведений о процессоре - Loading network adapter information + Загрузка сведений о сетевом адаптере \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/ru/TestConnectionResources.ru.resx b/src/Microsoft.PowerShell.Commands.Management/resources/ru/TestConnectionResources.ru.resx index 8f01dca03fd..081db9b632d 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/ru/TestConnectionResources.ru.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/ru/TestConnectionResources.ru.resx @@ -118,15 +118,15 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Testing connection to computer '{0}' failed: {1} + Не удалось проверить подключение к компьютеру {0}: {1} - Cannot resolve the target name. + Не удается разрешить имя цели. - Target IPv4/IPv6 address absent. + Целевой IPv4-/IPv6-адрес отсутствует. - Cannot complete traceroute to destination '{0}': Number of hops required to reach host exceeds MaxHops ({1}). + Не удается выполнить трассировку до назначения {0}: количество шагов, необходимых для достижения узла, превышает MaxHops ({1}). \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/tr/ComputerResources.tr.resx b/src/Microsoft.PowerShell.Commands.Management/resources/tr/ComputerResources.tr.resx index 0891a9bdd1a..c75bbcd15a7 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/tr/ComputerResources.tr.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/tr/ComputerResources.tr.resx @@ -118,276 +118,276 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - This functionality is not supported on this operating system. + Bu işletim sisteminde bu işlev desteklenmiyor. - Could not enable drive {0}. + Sürücü {0} etkinleştirilemedi. - The command cannot turn on the restore computer infrastructure on the specified computer because the supplied drive is not valid. Enter a valid drive in the Drive parameter, and then try again. + Sağlanan sürücü geçerli olmadığından komut, belirtilen bilgisayarda geri yükleme bilgisayarı altyapısını açamıyor. Drive parametresine geçerli bir sürücü girin ve ardından yeniden deneyin. - Include System Drive in the list of Drives. + Sistem Sürücüsünü Sürücüler listesine ekleyin. - The command cannot turn off the restore computer infrastructure because the supplied drive is not valid. Enter a valid drive in the Drive parameter, and then try again. + Sağlanan sürücü geçerli olmadığından komut, geri yükleme bilgisayarı altyapısını kapatamıyor. Drive parametresine geçerli bir sürücü girin ve ardından yeniden deneyin. - The command cannot disable System Restore on the {0} drive. You may not have sufficient permissions to perform this operation. + Komut, {0} sürücüsünde Sistem Geri Yükleme'yi devre dışı bırakamaz. Bu işlemi gerçekleştirmek için yeterli izniniz olmayabilir. - SystemRestore service is disabled. + SystemRestore hizmeti devre dışı. - The system restore infrastructure cannot create a restore point. + Sistem geri yükleme altyapısı geri yükleme noktası oluşturamıyor. - The last attempt to restore the computer failed. + Bilgisayarı geri yükleme için yapılan son girişim başarısız oldu. - The computer has been restored to the specified restore point. + Bilgisayar belirtilen geri yükleme noktasına geri yüklendi. - The last attempt to restore the computer was interrupted. + Bilgisayarı geri yükleme için yapılan son girişim yarıda kesildi. - The command cannot locate the "{0}" restore point. Verify the "{0}" sequence number, and then try the command again. + Komut, "{0}" geri yükleme noktasını bulamıyor. "{0}" sıra numarasını doğrulayın ve ardından komutu yeniden deneyin. {0} ({1}) - Failed to restart the computer {0} with the following error message: {1}. + Bilgisayar {0} şu hata iletisiyle yeniden başlatılamadı: {1}. - This command cannot be run on target computer('{1}') due to following error: {0}.{2} + Bu komut, hedef bilgisayarda ('{1}') şu hata nedeniyle çalıştırılamıyor: {0}.{2} - Failed to stop the computer {0} with the following error message: {1}. + Bilgisayar {0} şu hata iletisiyle durdurulamadı: {1}. - The command cannot restore the computer because "{0}" has not been set as valid restore point. Enter a valid restore point in the RestorePoint parameter, and then try again. + "{0}" geçerli bir geri yükleme noktası olarak ayarlanmadığından komut bilgisayarı geri yükleyemiyor. RestorePoint parametresine geçerli bir geri yükleme noktası girin ve yeniden deneyin. - The changes will take effect after you restart the computer {1}. + Değişiklikler {1} bilgisayarı yeniden başlatıldıktan sonra geçerli olacaktır. - After you leave the domain, you will need to know the password of the local Administrator account to log onto this computer. Do you wish to continue? + Etki alanından ayrıldıktan sonra, bu bilgisayarda oturum açmak için yerel Yönetici hesabının parolasını bilmeniz gerekecek. Devam etmek istiyor musunuz? - The following computer name is not valid: {0}. Make sure that the computer name is not longer than 255 characters, that it does not contain two or more consecutive dots, that it does not begin with a dot, that it does not contain only numeric characters, and that it does not contain any of the following characters: + Şu bilgisayar adı geçerli değil: {0}. Bilgisayar adının 255 karakterden uzun olmadığından, art arda iki veya daha fazla nokta içermediğinden, nokta ile başlamadığından, yalnızca sayısal karakterlerden oluşmadığından ve aşağıdaki karakterlerden hiçbirini içermediğinden emin olun: {{|}}~[\]^:;<=>?@!"#$%^`()+/, - The domain in computer name '{0}' is not valid. Make sure that the domain exists and that the name is a valid domain name. + '{0}' bilgisayar adındaki etki alanı geçerli değil. Etki alanının var olduğundan ve adın geçerli bir etki alanı adı olduğundan emin olun. - The value specified for the NewComputerName parameter is the same as the value of the ComputerName parameter. Provide a different value for the NewComputerName parameter. + NewComputerName parametresi için belirtilen değer, ComputerName parametresinin değeriyle aynı. NewComputerName parametresi için farklı bir değer sağlayın. - "The password of the secure channel between '{0}' and '{1}' has been reset." + "'{0}' ile '{1}' arasındaki güvenli kanalın parolası sıfırlandı." - This command cannot be run due to the following error: the service cannot be started because it is disabled or does not have enabled devices associated with it. + Bu komut şu hata nedeniyle çalıştırılamıyor: Hizmet devre dışı bırakıldığından veya ilişkilendirilmiş etkin cihazları olmadığından başlatılamıyor. - Creating a system restore point ... + Sistem geri yükleme noktası oluşturuluyor ... - Creating a system restore point... {0}% Completed. + Sistem geri yükleme noktası oluşturuluyor... %{0} Tamamlandı. - Completed. + Tamamlandı. - Try below options and Run the command again. -1. Verify that the target computer('{0}') is running. -2. Specify full computer name of the target computer('{0}'). + Aşağıdaki seçenekleri deneyin ve komutu yeniden çalıştırın. +1. Hedef bilgisayarın ('{0}') çalıştığını doğrulayın. +2. Hedef bilgisayarın tam bilgisayar adını ('{0}') belirtin. - Failed to restart the computer {0}. Access rights {1} cannot be enabled for the calling process. + Bilgisayar {0} yeniden başlatılamadı. Çağıran işlem için erişim hakları {1} etkinleştirilemiyor. - Enable the {0} and restart the computer. + {0} öğesini etkinleştirin ve bilgisayarı yeniden başlatın. - Local shutdown access rights + Yerel kapatma erişim hakları - Remote shutdown access rights + Uzaktan kapatma erişim hakları - Cannot wait for the local computer to restart. The local computer is ignored when the Wait parameter is specified. + Yerel bilgisayarın yeniden başlatılması beklenemiyor. Wait parametresi belirtildiğinde yerel bilgisayar yoksayılır. - The parameters Timeout, For, and Delay are valid only when the parameter Wait is specified. + Timeout, For ve Delay parametreleri yalnızca Wait parametresi belirtildiğinde geçerlidir. - Restarting computers... + Bilgisayarlar yeniden başlatılıyor... - Restarting computer {0} + Bilgisayar {0} yeniden başlatılıyor - Completed: {0}/{1}. + Tamamlandı: {0}/{1}. - Verifying that the computer has been restarted... + Bilgisayarın yeniden başlatıldığı doğrulanıyor... - Waiting for PowerShell connectivity... + PowerShell bağlantısı bekleniyor... - Waiting for the restart to begin... + Yeniden başlatmanın başlaması bekleniyor... - Waiting for WinRM connectivity... + WinRM bağlantısı bekleniyor... - Waiting for WMI connectivity... + WMI bağlantısı bekleniyor... - Restart is complete + Yeniden başlatma tamamlandı - The combined service types are not supported for now. + Birleşik hizmet türleri şu anda desteklenmiyor. - Computer name {0} cannot be resolved with the exception: {1}. + Bilgisayar adı {0} şu özel durum nedeniyle çözümlenemiyor: {1}. - The number of new names is not equal to the number of target computers. + Yeni adların sayısı hedef bilgisayarların sayısına eşit değil. - Skip computer '{0}' with new name '{1}' because the new name is not valid. The new computer name entered is not properly formatted. Standard names may contain letters (a-z, A-Z), numbers (0-9), and hyphens (-), but no spaces or periods (.). The name may not consist entirely of digits, and may not be longer than 63 characters. + Geçerli olmadığı için yeni adı '{1}' olan '{0}' bilgisayarını atlayın. Girilen yeni bilgisayar adı düzgün biçimlendirilmemiş. Standart adlar harfler (a-z, A-Z), sayılar (0-9) ve kısa çizgiler (-) içerebilir, ancak boşluk veya nokta (.) içeremez. Ad tamamen rakamlardan oluşamaz ve 63 karakterden uzun olamaz. - Skip computer '{0}' with new name '{1}' because the new name is the same as the current name. + Yeni ad geçerli adla aynı olduğundan, yeni adı '{1}' olan '{0}' bilgisayarını atlayın. - Cannot remove computer '{0}' because it is not in a domain. + Bilgisayar '{0}' bir etki alanında olmadığından kaldırılamıyor. - Failed to join computer '{0}' to workgroup '{1}' with the following error message: {2} + Bilgisayar '{0}', şu hata iletisiyle '{1}' çalışma grubuna katılamadı: {2} - Cannot remove computer(s) from the domain because the local network is down. + Yerel ağ kapalı olduğundan bilgisayarlar etki alanından kaldırılamıyor. - Fail to rename computer '{0}' to '{1}' due to the following exception: {2}. + Şu özel durum nedeniyle '{0}' bilgisayarı '{1}' olarak yeniden adlandırılamadı: {2}. - Join in domain '{0}' + '{0}' etki alanına katıl - Join in workgroup '{0}' + '{0}' çalışma grubuna katıl - Cannot add computer '{0}' to domain '{1}' because it is already in that domain. + Bilgisayar '{0}' zaten bu etki alanında olduğundan '{1}' etki alanına eklenemiyor. - Cannot add computer '{0}' to workgroup '{1}' because it is already in that workgroup. + Bilgisayar '{0}' zaten bu çalışma grubunda olduğundan '{1}' çalışma grubuna eklenemiyor. - Computer '{0}' successfully joined the workgroup '{1}', but could not be renamed to '{2}' with the following error message: {3}. + Bilgisayar '{0}', '{1}' çalışma grubuna başarıyla katıldı, ancak şu hata iletisiyle '{2}' olarak yeniden adlandırılamadı: {3}. - Computer '{0}' was successfully unjoined from the domain '{1}', but it failed to join the workgroup '{2}' with the following error message: {3}. + Bilgisayar '{0}', '{1}' etki alanından başarıyla kaldırıldı ancak şu hata iletisiyle '{2}' çalışma grubuna katılamadı: {3}. - Failed to unjoin computer '{0}' from domain '{1}' with the following error message: {2}. + '{0}' bilgisayarının '{1}' etki alanından çıkarılması şu hata iletisi nedeniyle başarısız oldu: {2}. - Cannot establish the WMI connection to the computer '{0}' with the following error message: {1}. + '{0}' bilgisayarına WMI bağlantısı şu hata iletisiyle kurulamıyor: {1}. - Computer '{0}' failed to join domain '{1}' from its current workgroup '{2}' with following error message: {3}. + Bilgisayar '{0}', geçerli çalışma grubu '{2}' içindeyken '{1}' etki alanına şu hata iletisiyle katılamadı: {3}. - Computer '{0}' was successfully unjoined from domain '{1}', but failed to join the new domain '{2}' with the following error message: {3}. + Bilgisayar '{0}', '{1}' etki alanından başarıyla kaldırıldı ancak şu hata iletisiyle '{2}' yeni etki alanına katılamadı: {3}. - Computer '{0}' was successfully joined to the new domain '{1}', but renaming it to '{2}' failed with the following error message: {3}. + '{0}' bilgisayarı '{1}' yeni etki alanına başarıyla katıldı, ancak '{2}' olarak yeniden adlandırılması şu hata iletisiyle başarısız oldu: {3}. - The flag '{0}' is valid only if flag '{1}' is specified. + '{0}' bayrağı yalnızca '{1}' bayrağı belirtildiğinde geçerlidir. - Cannot rename multiple computers. The NewName parameter is valid only if a single computer is specified. + Birden çok bilgisayar yeniden adlandırılamıyor. NewName parametresi yalnızca tek bir bilgisayar belirtildiğinde geçerlidir. - Cannot find the computer account for the local computer in the domain {0}. + {0} etki alanındaki yerel bilgisayarın bilgisayar hesabı bulunamıyor. - Cannot find the computer account for the local computer from the domain controller {0}. + {0} etki alanı denetleyicisinden yerel bilgisayarın bilgisayar hesabı bulunamıyor. - Cannot get domain information about the local computer because of the following exception: {0}. + Şu özel durum nedeniyle yerel bilgisayarın etki alanı bilgileri alınamıyor: {0}. - Cannot reset the secure channel password for the computer account in the domain. Operation failed with the following exception: {0}. + Etki alanındaki bilgisayar hesabı için güvenli kanal parolası sıfırlanamıyor. İşlem aşağıdaki özel durumla başarısız oldu: {0}. - Resetting the secure channel password for the local computer failed with the following error message: {0}. + Yerel bilgisayarın güvenli kanal parolasını sıfırlama işlemi şu hata iletisiyle başarısız oldu: {0}. - Administrator rights are required to reset the secure channel password on the local computer. Access is denied. + Yerel bilgisayarda güvenli kanal parolasını sıfırlamak için Yönetici hakları gereklidir. Erişim reddedildi. - Cannot reset the secure channel password for the account of the local computer. The local computer is not currently part of a domain. + Yerel bilgisayar hesabı için güvenli kanal parolası sıfırlanamıyor. Yerel bilgisayar şu anda bir etki alanının parçası değil. - The NetBIOS name of the computer is limited to 15 bytes, which is 15 characters in this case. The NetBIOS name will be shortened to "{0}", which may cause conflicts under NetBIOS name resolution. Do you wish to continue? + Bilgisayarın NetBIOS adı 15 bayt ile sınırlıdır ve bu durumda 15 karakterdir. NetBIOS adı "{0}" olarak kısaltılacak. Bu durum NetBIOS ad çözümlemesinde çakışmalara neden olabilir. Devam etmek istiyor musunuz? - NetBIOS name will be truncated. + NetBIOS adı kesilecek. - The specified server name {0} cannot be resolved. + Belirtilen sunucu adı {0} çözümlenemiyor. - A new system restore point cannot be created because one has already been created within the past {0} minutes. The frequency of restore point creation can be changed by creating the DWORD value 'SystemRestorePointCreationFrequency' under the registry key 'HKLM\Software\Microsoft\Windows NT\CurrentVersion\SystemRestore'. The value of this registry key indicates the necessary time interval (in minutes) between two restore point creation. The default value is 1440 minutes (24 hours). + Son {0} dakika içinde zaten bir sistem geri yükleme noktası oluşturulduğundan yeni bir tane oluşturulamıyor. Geri yükleme noktası oluşturma sıklığı, 'HKLM\Software\Microsoft\Windows NT\CurrentVersion\SystemRestore' kayıt defteri anahtarı altında 'SystemRestorePointCreationFrequency' DWORD değeri oluşturularak değiştirilebilir. Bu kayıt defteri anahtarının değeri, iki geri yükleme noktası oluşturma arasındaki gerekli zaman aralığını dakika cinsinden belirtir. Varsayılan değer 1440 dakikadır (24 saat). - The Win32_OperatingSystem WMI object cannot be retrieved. + Win32_OperatingSystem WMI nesnesi alınamıyor. - The computer {0} is skipped. Fail to retrieve its LastBootUpTime via the WMI service with the following error message: {1}. + Bilgisayar {0} atlandı. LastBootUpTime değeri WMI hizmeti üzerinden şu hata iletisiyle alınamadı: {1}. - Cannot verify the secure channel for the local computer. Operation failed with the following exception: {0}. + Yerel bilgisayar için güvenli kanal doğrulanamıyor. İşlem aşağıdaki özel durumla başarısız oldu: {0}. - The attempt to repair the secure channel between the local computer and the domain {0} has failed. + Yerel bilgisayar ile etki alanı {0} arasındaki güvenli kanalı onarma girişimi başarısız oldu. - The secure channel between the local computer and the domain {0} was successfully repaired. + Yerel bilgisayar ile etki alanı {0} arasındaki güvenli kanal başarıyla onarıldı. - The secure channel between the local computer and the domain {0} is in good condition. + Yerel bilgisayar ile etki alanı {0} arasındaki güvenli kanal iyi durumda. - The secure channel between the local computer and the domain {0} is broken. + Yerel bilgisayar ile etki alanı {0} arasındaki güvenli kanal bozuk. - Cannot verify the secure channel password for the local computer. The local computer is not currently part of a domain. + Yerel bilgisayar için güvenli kanal doğrulanamıyor. Yerel bilgisayar şu anda bir etki alanının parçası değil. - The operation cannot be performed because the system restore APIs are not supported on the Advanced RISC Machine (ARM) platform. + Sistem geri yükleme API'leri Advanced RISC Machine (ARM) platformunda desteklenmediğinden işlem gerçekleştirilemiyor. - The computer did not finish restarting within the specified time-out period. + Bilgisayar belirtilen zaman aşımı süresi içinde yeniden başlatmayı tamamlamadı. - Cannot validate the time interval for restore point creation. It failed to retrieve the last restore point with the following error message: {0}. + Geri yükleme noktası oluşturma zaman aralığı doğrulanamıyor. Son geri yükleme noktası şu hata iletisiyle alınamadı: {0}. - The AsJob Parameter Set is not supported. + AsJob Parametre Kümesi desteklenmiyor. - The {0} parameter is not supported for CoreCLR. + {0} parametresi CoreCLR için desteklenmiyor. - The required native command 'shutdown' was not found. + Gerekli yerel 'shutdown' komutu bulunamadı. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/tr/TestConnectionResources.tr.resx b/src/Microsoft.PowerShell.Commands.Management/resources/tr/TestConnectionResources.tr.resx index 8f01dca03fd..7acc1de0292 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/tr/TestConnectionResources.tr.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/tr/TestConnectionResources.tr.resx @@ -118,15 +118,15 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Testing connection to computer '{0}' failed: {1} + Bilgisayar '{0}' için bağlantı sınaması başarısız oldu: {1} - Cannot resolve the target name. + Hedef adı çözümlenemiyor. - Target IPv4/IPv6 address absent. + Hedef IPv4/IPv6 adresi yok. - Cannot complete traceroute to destination '{0}': Number of hops required to reach host exceeds MaxHops ({1}). + Hedef '{0}' için traceroute tamamlanamıyor: Konağa ulaşmak için gereken atlama sayısı MaxHops değerini ({1}) aşıyor. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/tr/TestPathResources.tr.resx b/src/Microsoft.PowerShell.Commands.Management/resources/tr/TestPathResources.tr.resx index 6587c518bcc..e2adb31f77c 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/tr/TestPathResources.tr.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/tr/TestPathResources.tr.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The provided Path argument was null or an empty collection. + Sağlanan Path bağımsız değişkeni null veya boş bir koleksiyondu. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hans/ComputerInfoResources.zh-Hans.resx b/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hans/ComputerInfoResources.zh-Hans.resx index 522b61cb43a..165d2c12391 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hans/ComputerInfoResources.zh-Hans.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hans/ComputerInfoResources.zh-Hans.resx @@ -118,27 +118,27 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Loading operating system information + 正在加载操作系统信息 - Loading hot-patch information + 正在加载热修补程序信息 - Loading registry information + 正在加载注册表信息 - Loading BIOS information + 正在加载 BIOS 信息 - Loading motherboard information + 正在加载主板信息 - Loading Computer information + 正在加载计算机信息 - Loading processor information + 正在加载处理器信息 - Loading network adapter information + 正在加载网络适配器信息 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hans/ComputerResources.zh-Hans.resx b/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hans/ComputerResources.zh-Hans.resx index 0891a9bdd1a..1f96f8b5ba9 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hans/ComputerResources.zh-Hans.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hans/ComputerResources.zh-Hans.resx @@ -118,276 +118,276 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - This functionality is not supported on this operating system. + 此操作系统不支持此功能。 - Could not enable drive {0}. + 无法启用驱动器 {0}。 - The command cannot turn on the restore computer infrastructure on the specified computer because the supplied drive is not valid. Enter a valid drive in the Drive parameter, and then try again. + 此命令无法开启指定计算机上的计算机还原基础结构，因为提供的驱动器无效。请在 Drive 参数中输入有效的驱动器，然后重试。 - Include System Drive in the list of Drives. + 在驱动器列表中添加系统驱动器。 - The command cannot turn off the restore computer infrastructure because the supplied drive is not valid. Enter a valid drive in the Drive parameter, and then try again. + 此命令无法关闭计算机还原基础结构，因为提供的驱动器无效。请在 Drive 参数中输入有效的驱动器，然后重试。 - The command cannot disable System Restore on the {0} drive. You may not have sufficient permissions to perform this operation. + 此命令无法在 {0} 驱动器上禁用系统还原。你的权限可能不足，无法执行此操作。 - SystemRestore service is disabled. + 已禁用系统还原服务。 - The system restore infrastructure cannot create a restore point. + 系统还原基础结构无法创建还原点。 - The last attempt to restore the computer failed. + 上次尝试还原计算机失败。 - The computer has been restored to the specified restore point. + 计算机已还原到指定的还原点。 - The last attempt to restore the computer was interrupted. + 上次尝试还原计算机时被中断。 - The command cannot locate the "{0}" restore point. Verify the "{0}" sequence number, and then try the command again. + 此命令找不到“{0}”还原点。请验证“{0}”序列号，然后重试该命令。 {0} ({1}) - Failed to restart the computer {0} with the following error message: {1}. + 未能重启计算机 {0}，错误消息如下: {1}。 - This command cannot be run on target computer('{1}') due to following error: {0}.{2} + 由于以下错误，无法在目标计算机("{1}")上运行此命令: {0}。{2} - Failed to stop the computer {0} with the following error message: {1}. + 未能停止计算机 {0}，错误消息如下: {1}。 - The command cannot restore the computer because "{0}" has not been set as valid restore point. Enter a valid restore point in the RestorePoint parameter, and then try again. + 此命令无法还原计算机，因为尚未将“{0}”设置为有效的还原点。请在 RestorePoint 参数中输入有效的还原点，然后重试。 - The changes will take effect after you restart the computer {1}. + 这些更改将在你重启计算机 {1} 后生效。 - After you leave the domain, you will need to know the password of the local Administrator account to log onto this computer. Do you wish to continue? + 离开域后，你需要知道本地管理员帐户的密码才能登录到此计算机。是否要继续操作? - The following computer name is not valid: {0}. Make sure that the computer name is not longer than 255 characters, that it does not contain two or more consecutive dots, that it does not begin with a dot, that it does not contain only numeric characters, and that it does not contain any of the following characters: + 以下计算机名称无效: {0}。确保计算机名称不超过 255 个字符，不包含两个或多个连续的句点，不以句点开头，不全是数字字符，并且不包含以下任一字符: {{|}}~[\]^:;<=>?@!"#$%^`()+/, - The domain in computer name '{0}' is not valid. Make sure that the domain exists and that the name is a valid domain name. + 计算机名 "{0}" 中的域无效。请确保该域存在，并且该名称是有效的域名。 - The value specified for the NewComputerName parameter is the same as the value of the ComputerName parameter. Provide a different value for the NewComputerName parameter. + 为 NewComputerName 参数指定的值与 ComputerName 参数的值相同。请为 NewComputerName 参数提供其他值。 - "The password of the secure channel between '{0}' and '{1}' has been reset." + “"{0}"和 "{1}" 之间的安全通道密码已重置。” - This command cannot be run due to the following error: the service cannot be started because it is disabled or does not have enabled devices associated with it. + 由于以下错误，无法运行此命令: 无法启动服务，因为它已被禁用，或者没有已启用的设备与之关联。 - Creating a system restore point ... + 正在创建系统还原点... - Creating a system restore point... {0}% Completed. + 正在创建系统还原点...已完成 {0}%。 - Completed. + 已完成。 - Try below options and Run the command again. -1. Verify that the target computer('{0}') is running. -2. Specify full computer name of the target computer('{0}'). + 请尝试以下选项，然后再次运行该命令。 +1. 验证目标计算机("{0}")是否正在运行。 +2. 指定目标计算机("{0}")的计算机全名。 - Failed to restart the computer {0}. Access rights {1} cannot be enabled for the calling process. + 未能重启计算机 {0}。无法为调用进程启用访问权限“{1}”。 - Enable the {0} and restart the computer. + 启用 {0} 并重启计算机。 - Local shutdown access rights + 本地关机访问权限 - Remote shutdown access rights + 远程关机访问权限 - Cannot wait for the local computer to restart. The local computer is ignored when the Wait parameter is specified. + 无法等待本地计算机重启。指定 Wait 参数时，会忽略本地计算机。 - The parameters Timeout, For, and Delay are valid only when the parameter Wait is specified. + 仅当指定了参数 Wait 时，参数 Timeout、For 和 Delay 才有效。 - Restarting computers... + 正在重启计算机... - Restarting computer {0} + 正在重启计算机 {0} - Completed: {0}/{1}. + 已完成: {0}/{1}。 - Verifying that the computer has been restarted... + 正在验证计算机是否已重启... - Waiting for PowerShell connectivity... + 正在等待 PowerShell 连接... - Waiting for the restart to begin... + 正在等待重启开始... - Waiting for WinRM connectivity... + 正在等待 WinRM 连接... - Waiting for WMI connectivity... + 正在等待 WMI 连接... - Restart is complete + 重启已完成 - The combined service types are not supported for now. + 目前不支持组合服务类型。 - Computer name {0} cannot be resolved with the exception: {1}. + 无法解析计算机名 {0}，出现以下异常: {1}。 - The number of new names is not equal to the number of target computers. + 新名称的数量与目标计算机的数量不相等。 - Skip computer '{0}' with new name '{1}' because the new name is not valid. The new computer name entered is not properly formatted. Standard names may contain letters (a-z, A-Z), numbers (0-9), and hyphens (-), but no spaces or periods (.). The name may not consist entirely of digits, and may not be longer than 63 characters. + 跳过新名称为 "{1}" 的计算机 "{0}"，因为新名称无效。输入的新计算机名格式不正确。标准名称可以包含字母(a-z，A-Z)、数字(0-9)和连字符(-)，但不能使用空格或句点(.)。该名称可能不完全为数字，并且长度可能不超过 63 个字符。 - Skip computer '{0}' with new name '{1}' because the new name is the same as the current name. + 跳过新名称为 "{1}" 的计算机 "{0}"，因为新名称与当前名称相同。 - Cannot remove computer '{0}' because it is not in a domain. + 无法删除计算机 "{0}"，因为它不在域中。 - Failed to join computer '{0}' to workgroup '{1}' with the following error message: {2} + 未能将计算机 "{0}" 加入工作组 "{1}"，错误消息如下: {2} - Cannot remove computer(s) from the domain because the local network is down. + 无法从域中删除计算机，因为本地网络已断开。 - Fail to rename computer '{0}' to '{1}' due to the following exception: {2}. + 由于发生以下异常，未能将计算机 "{0}" 重命名为 "{1}": {2}。 - Join in domain '{0}' + 加入域 "{0}" - Join in workgroup '{0}' + 加入工作组 "{0}" - Cannot add computer '{0}' to domain '{1}' because it is already in that domain. + 无法将计算机 "{0}" 添加到域 "{1}"，因为它已在该域中。 - Cannot add computer '{0}' to workgroup '{1}' because it is already in that workgroup. + 无法将计算机 "{0}" 添加到工作组 "{1}"，因为它已在该工作组中。 - Computer '{0}' successfully joined the workgroup '{1}', but could not be renamed to '{2}' with the following error message: {3}. + 计算机 "{0}" 已成功加入工作组 "{1}"，但无法重命名为 "{2}"，错误消息如下: {3}。 - Computer '{0}' was successfully unjoined from the domain '{1}', but it failed to join the workgroup '{2}' with the following error message: {3}. + 计算机 "{0}" 已成功从域 "{1}" 中移除，但未能加入工作组 "{2}"，错误消息如下: {3}。 - Failed to unjoin computer '{0}' from domain '{1}' with the following error message: {2}. + 未能将计算机 "{0}" 从域 "{1}" 中移除，以下是错误消息: {2}。 - Cannot establish the WMI connection to the computer '{0}' with the following error message: {1}. + 无法建立与计算机 "{0}" 的 WMI 连接，错误消息如下: {1}。 - Computer '{0}' failed to join domain '{1}' from its current workgroup '{2}' with following error message: {3}. + 计算机 "{0}" 未能从其当前工作组 "{2}" 加入域 "{1}"，错误消息如下: {3}。 - Computer '{0}' was successfully unjoined from domain '{1}', but failed to join the new domain '{2}' with the following error message: {3}. + 计算机 "{0}" 已成功从域 "{1}" 中移除，但未能加入新域 "{2}"，以下是错误消息: {3}。 - Computer '{0}' was successfully joined to the new domain '{1}', but renaming it to '{2}' failed with the following error message: {3}. + 计算机 "{0}" 已成功加入新域 "{1}"，但未能将其重命名为 "{2}"，错误消息如下: {3}。 - The flag '{0}' is valid only if flag '{1}' is specified. + 仅当指定了标志 "{1}" 时，标志 "{0}" 才有效。 - Cannot rename multiple computers. The NewName parameter is valid only if a single computer is specified. + 无法重命名多台计算机。只有在指定一台计算机时，NewName 参数才有效。 - Cannot find the computer account for the local computer in the domain {0}. + 在域 {0} 中找不到本地计算机的计算机帐户。 - Cannot find the computer account for the local computer from the domain controller {0}. + 在域控制器 {0} 中找不到本地计算机的计算机帐户。 - Cannot get domain information about the local computer because of the following exception: {0}. + 由于发生以下异常，无法获取本地计算机的域信息: {0}。 - Cannot reset the secure channel password for the computer account in the domain. Operation failed with the following exception: {0}. + 无法重置域中计算机帐户的安全通道密码。操作失败，发生以下错误: {0}。 - Resetting the secure channel password for the local computer failed with the following error message: {0}. + 重置本地计算机的安全通道密码失败，错误消息如下: {0}。 - Administrator rights are required to reset the secure channel password on the local computer. Access is denied. + 需要管理员权限才能在本地计算机上重置安全通道密码。访问被拒绝。 - Cannot reset the secure channel password for the account of the local computer. The local computer is not currently part of a domain. + 无法重置本地计算机帐户的安全通道密码。本地计算机当前不是域的一部分。 - The NetBIOS name of the computer is limited to 15 bytes, which is 15 characters in this case. The NetBIOS name will be shortened to "{0}", which may cause conflicts under NetBIOS name resolution. Do you wish to continue? + 计算机的 NetBIOS 名称限制为 15 个字节，在本例中为 15 个字符。NetBIOS 名称将被缩短为 "{0}"，这可能会导致 NetBIOS 名称解析冲突。是否要继续操作? - NetBIOS name will be truncated. + NetBIOS 名称将被截断。 - The specified server name {0} cannot be resolved. + 无法解析指定的服务器名称 {0}。 - A new system restore point cannot be created because one has already been created within the past {0} minutes. The frequency of restore point creation can be changed by creating the DWORD value 'SystemRestorePointCreationFrequency' under the registry key 'HKLM\Software\Microsoft\Windows NT\CurrentVersion\SystemRestore'. The value of this registry key indicates the necessary time interval (in minutes) between two restore point creation. The default value is 1440 minutes (24 hours). + 无法创建新的系统还原点，因为在过去 {0} 分钟内已创建了一个。可以通过在注册表项 "HKLM\Software\Microsoft\Windows NT\CurrentVersion\SystemRestore" 下创建 DWORD 值 "SystemRestorePointCreationFrequency" 来更改还原点创建频率。此注册表项的值表示两个还原点创建之间所需的时间间隔(以分钟为单位)。默认值为 1440 分钟(24 小时)。 - The Win32_OperatingSystem WMI object cannot be retrieved. + 无法检索 Win32_OperatingSystem WMI 对象。 - The computer {0} is skipped. Fail to retrieve its LastBootUpTime via the WMI service with the following error message: {1}. + 已跳过计算机 {0}。未能通过 WMI 服务检索其 LastBootUpTime，错误消息如下: {1}。 - Cannot verify the secure channel for the local computer. Operation failed with the following exception: {0}. + 无法验证本地计算机的安全通道。操作失败，发生以下错误: {0}。 - The attempt to repair the secure channel between the local computer and the domain {0} has failed. + 尝试修复本地计算机和域 {0} 之间的安全通道失败。 - The secure channel between the local computer and the domain {0} was successfully repaired. + 已成功修复本地计算机和域 {0} 之间的安全通道。 - The secure channel between the local computer and the domain {0} is in good condition. + 本地计算机和域 {0} 之间的安全通道状况良好。 - The secure channel between the local computer and the domain {0} is broken. + 本地计算机和域 {0} 之间的安全通道断开。 - Cannot verify the secure channel password for the local computer. The local computer is not currently part of a domain. + 无法验证本地计算机的安全通道密码。本地计算机当前不是域的一部分。 - The operation cannot be performed because the system restore APIs are not supported on the Advanced RISC Machine (ARM) platform. + 无法执行该操作，因为高级 RISC 机器(ARM)平台不支持系统还原 API。 - The computer did not finish restarting within the specified time-out period. + 计算机未在指定的超时期限内完成重启。 - Cannot validate the time interval for restore point creation. It failed to retrieve the last restore point with the following error message: {0}. + 无法验证还原点创建的时间间隔。未能检索上一个还原点，并显示以下错误消息: {0}。 - The AsJob Parameter Set is not supported. + 不支持 AsJob 参数集。 - The {0} parameter is not supported for CoreCLR. + CoreCLR 不支持参数 {0}。 - The required native command 'shutdown' was not found. + 找不到所需的本机命令 "shutdown"。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hans/TestConnectionResources.zh-Hans.resx b/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hans/TestConnectionResources.zh-Hans.resx index 8f01dca03fd..19426e32187 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hans/TestConnectionResources.zh-Hans.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hans/TestConnectionResources.zh-Hans.resx @@ -118,15 +118,15 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Testing connection to computer '{0}' failed: {1} + 测试与计算机 '{0}' 的连接失败: {1} - Cannot resolve the target name. + 无法解析目标名称。 - Target IPv4/IPv6 address absent. + 缺少目标 IPv4/IPv6 地址。 - Cannot complete traceroute to destination '{0}': Number of hops required to reach host exceeds MaxHops ({1}). + 无法完成到目标 '{0}' 的 traceroute: 到达主机所需的跃点数超过了 MaxHops ({1})。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hant/CmdletizationResources.zh-Hant.resx b/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hant/CmdletizationResources.zh-Hant.resx index b97467043ef..19acc196adc 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hant/CmdletizationResources.zh-Hant.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hant/CmdletizationResources.zh-Hant.resx @@ -118,54 +118,54 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot find the {0} class on the {1} CIM server. Verify the value of the ClassName xml attribute in Cmdlet Definition XML and retry. Valid class name example: ROOT\cimv2\Win32_Process. + 在 {1} CIM 伺服器上找不到 {0} 類別。 請確認 Cmdlet 定義 XML 中 ClassName xml 屬性的值，然後重試。有效的類別名稱範例: ROOT\cimv2\Win32_Process。 {StrContains="ClassName"} {StrContains="ROOT\cimv2\Win32_Process"} {0} is a placeholder for a name of a (potentially misspelled) CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". - CIM method {1} on the {0} CIM object + {0} CIM 物件上的 CIM 方法 {1} {0} is a placeholder for a CIM path. Example: \\SERVER1\ROOT\cimv2:Win32_Process.Handle="11828" {1} is a placeholder for a CIM method name. Example: Create - Failed to run {1}. {0} + 無法執行 {1}。{0} {0} is a placeholder for a generic CIM failure. Example: 'Invalid namespace' or '9' {1} is a placeholder for a description of CIM operation. This most likely comes from CimJob_MethodDescription or CimJob_QueryDescription - Running the following operation: {0}. + 正在執行以下作業: {0}。 {0} is a placeholder for a description of CIM operation. This most likely comes from CimJob_MethodDescription or CimJob_QueryDescription - CIM cmdlets do not support the {0} parameter together with the AsJob parameter. Remove one of these parameters and retry. + CIM Cmdlet 不支援 {0} 參數與 AsJob 參數一起使用。 請移除其中一個參數，然後重試。 {StrContains="AsJob"} {0} is a placeholder for 'WhatIf' or 'Confirm' cmdlet parameters - CIM query for instances of the {0} class on the {1} CIM server: {2} + 位於 {1} CIM 伺服器上 {0} 類別執行個體的 CIM 查詢: {2} {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". - The CIM method returned the following error code: {0} + CIM 方法傳回下列錯誤碼: {0} {0} is a placeholder for an error code returned from a CIM method. Example: 123 - The {2} CIM method exposed by the {0} class on the {1} CIM server + {0} 類別在 {1} CIM 伺服器上公開的 {2} CIM 方法 {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". {2} is a placeholder for a CIM method name. Example: Create - CIM intrinsic type + CIM 內在類型 - WQL literal + WQL 常值 - Cannot find the {2} output parameter of the {1} method of the {0} CIM object. Verify the value of the ParameterName attribute in Cmdlet Definition XML and retry. + 找不到 {0} CIM 物件之 {1} 方法的 {2} 輸出參數。 請確認 Cmdlet 定義 XML 中 ParameterName 屬性的值，然後重試。 {StrContains="ParameterName"} {0} is a placeholder for a CIM path. Example: \\SERVER1\ROOT\cimv2:Win32_Process.Handle="11828" {1} is a placeholder for a name of a (potentially misspelled) CIM method. Example: "Terminate". @@ -173,45 +173,45 @@ - No matching {1} objects found by {0}. Verify query parameters and retry. + 找不到由 {1} 對應的相符 {0} 物件。請確認查詢參數，然後再試一次。 - No {2} objects found with property '{0}' equal to '{1}'. Verify the value of the property and retry. + 找不到屬性 '{0}' 等於 '{1}' 的 {2} 物件。 請確認屬性的值，然後重試。 - Type of {0} property ({1}) doesn't match the CIM type ({2}) associated with the type declared in Cmdlet Definition XML. + {0} 屬性的類型 ({1}) 與 Cmdlet 定義 XML 中宣告的類型所對應的 CIM 類型 ({2}) 不符。 - CIM query for enumerating associated instance of the {0} class on the {1} CIM server + 列舉位於 {1} CIM 伺服器上 {0} 類別之相關執行個體的 CIM 查詢 {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". - CIM query for enumerating instances of the {0} class on the {1} CIM server, that are associated with the following instance: {2} + 列舉位於 {0} CIM 伺服器上、與下列執行個體相關聯之 {1} 類別執行個體的 CIM 查詢: {2} {0} is a placeholder for a name of a CIM class. Example: "Win32_Process". {1} is a placeholder for a server name. Example: "localhost". {2} is a placeholder for a string describing a CimInstance. Example: "Win32_Process[Handle=123]". - The {0} command cannot complete, because the {1} server is currently busy. The command will be automatically resumed in {2:f2} seconds. + {0} 命令無法完成，因為 {1} 伺服器目前忙碌中。 命令將在 {2:f2} 秒後自動恢復。 {0} is a placeholder for a command name. Example: "Get-NetAdapter" {1} is a placeholder for a computer name. Example: "localhost" {2} is a placeholder for a number of seconds. Example: 1.23 - Cannot connect to CIM server. {0} + 無法連線到 CIM 伺服器。{0} {0} is a placeholder for a more detailed error message. - The cmdlet does not fully support the Inquire action for debug messages. Cmdlet operation will continue during the prompt. Select a different action preference via -Debug switch or $DebugPreference variable, and try again. + Cmdlet 未完全支援偵錯訊息的 Inquire 動作。 Cmdlet 作業會在提示期間繼續。 請透過 -Debug 開關或 $DebugPreference 變數選取其他動作喜好設定，然後再試一次。 {StrContains="Debug"} {StrContains="DebugPreference"} {StrContains="Inquire"} - The cmdlet does not fully support the Inquire action for warnings. Cmdlet operation will continue during the prompt. Select a different action preference via -WarningAction parameter or $WarningPreference variable, and try again. + Cmdlet 未完全支援警告的 Inquire 動作。 Cmdlet 作業會在提示期間繼續。 請透過 -WarningAction 參數或 $WarningPreference 變數選取其他動作喜好設定，然後再試一次。 {StrContains="WarningAction"} {StrContains="WarningPreference"} {StrContains="Inquire"} - The cmdlet does not fully support the Stop action for warnings. Cmdlet operation will be stopped with a delay. Select a different action preference via -WarningAction parameter or $WarningPreference variable, and try again. + Cmdlet 未完全支援警告的 Stop 動作。 Cmdlet 作業將延遲停止。 請透過 -WarningAction 參數或 $WarningPreference 變數選取其他動作喜好設定，然後再試一次。 {StrContains="WarningAction"} {StrContains="WarningPreference"} {StrContains="Stop"} @@ -220,11 +220,11 @@ {1} is a placeholder for the original message. Example: "Deleting managed resource" - {0}: A CimSession to the CIM server uses the DCOM protocol, which does not support the {1} switch. + {0}: CIM 伺服器的 CimSession 使用 DCOM 通訊協定，而該通訊協定不支援 {1} 開關。 {0} is a placeholder for a name of a computer {1} is a placeholder for 'Confirm' or 'WhatIf' - No {2} objects found with property '{0}' matching '{1}'. Verify the value of the property and retry. + 找不到屬性 '{0}' 符合 '{1}' 的 {2} 物件。 請確認屬性的值，然後重試。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hant/ComputerInfoResources.zh-Hant.resx b/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hant/ComputerInfoResources.zh-Hant.resx index 522b61cb43a..81b04c759a2 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hant/ComputerInfoResources.zh-Hant.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hant/ComputerInfoResources.zh-Hant.resx @@ -118,27 +118,27 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Loading operating system information + 正在載入作業系統資訊 - Loading hot-patch information + 正在載入熱修補資訊 - Loading registry information + 正在載入登錄資訊 - Loading BIOS information + 正在載入 BIOS 資訊 - Loading motherboard information + 正在載入主機板資訊 - Loading Computer information + 正在載入電腦資訊 - Loading processor information + 正在載入處理器資訊 - Loading network adapter information + 正在載入網路介面卡資訊 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hant/ComputerResources.zh-Hant.resx b/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hant/ComputerResources.zh-Hant.resx index 0891a9bdd1a..f43a92309cf 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hant/ComputerResources.zh-Hant.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hant/ComputerResources.zh-Hant.resx @@ -118,276 +118,276 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - This functionality is not supported on this operating system. + 此作業系統不支援此功能。 - Could not enable drive {0}. + 無法啟用磁碟機 {0}。 - The command cannot turn on the restore computer infrastructure on the specified computer because the supplied drive is not valid. Enter a valid drive in the Drive parameter, and then try again. + 因為提供的磁碟機無效，所以命令無法在指定電腦上開啟還原電腦基礎結構。請在 Drive 參數中輸入有效的磁碟機，然後再試一次。 - Include System Drive in the list of Drives. + 在磁碟機清單中包含系統磁碟機。 - The command cannot turn off the restore computer infrastructure because the supplied drive is not valid. Enter a valid drive in the Drive parameter, and then try again. + 因為提供的磁碟機無效，所以命令無法關閉還原電腦基礎結構。請在 Drive 參數中輸入有效的磁碟機，然後再試一次。 - The command cannot disable System Restore on the {0} drive. You may not have sufficient permissions to perform this operation. + 命令無法在 {0} 磁碟機上停用系統還原。您可能沒有足夠的權限可執行此作業。 - SystemRestore service is disabled. + 系統還原服務已停用。 - The system restore infrastructure cannot create a restore point. + 系統還原基礎結構無法建立還原點。 - The last attempt to restore the computer failed. + 上次的電腦還原嘗試失敗。 - The computer has been restored to the specified restore point. + 電腦已還原至指定的還原點。 - The last attempt to restore the computer was interrupted. + 上次的電腦還原嘗試已中斷。 - The command cannot locate the "{0}" restore point. Verify the "{0}" sequence number, and then try the command again. + 命令找不到 "{0}" 還原點。請確認 "{0}" 序號，然後再次嘗試命令。 {0} ({1}) - Failed to restart the computer {0} with the following error message: {1}. + 無法重新啟動電腦 {0}，錯誤訊息如下: {1}。 - This command cannot be run on target computer('{1}') due to following error: {0}.{2} + 由於下列錯誤，無法在目標電腦('{1}')上執行此命令: {0}。{2} - Failed to stop the computer {0} with the following error message: {1}. + 無法停止電腦 {0}，錯誤訊息如下: {1}。 - The command cannot restore the computer because "{0}" has not been set as valid restore point. Enter a valid restore point in the RestorePoint parameter, and then try again. + 命令無法還原電腦 "{0}"，因為它尚未設定為有效的還原點。請在 RestorePoint 參數中輸入有效的還原點，然後再試一次。 - The changes will take effect after you restart the computer {1}. + 該變更將在您重新啟動電腦 {1} 之後生效。 - After you leave the domain, you will need to know the password of the local Administrator account to log onto this computer. Do you wish to continue? + 離開網域之後，您必須知道本機系統管理員帳戶的密碼，才能登入這部電腦。是否要繼續? - The following computer name is not valid: {0}. Make sure that the computer name is not longer than 255 characters, that it does not contain two or more consecutive dots, that it does not begin with a dot, that it does not contain only numeric characters, and that it does not contain any of the following characters: + 下列電腦名稱無效: {0}。請確定電腦名稱不超過 255 個字元、不包含兩個以上的連續句號、不以句號開頭、不全為數字字元，且不包含下列任何字元: {{|}}~[\]^:;<=>?@!"#$%^`()+/, - The domain in computer name '{0}' is not valid. Make sure that the domain exists and that the name is a valid domain name. + 電腦名稱 '{0}' 中的網域無效。請確定網域存在，而且名稱是有效的網域名稱。 - The value specified for the NewComputerName parameter is the same as the value of the ComputerName parameter. Provide a different value for the NewComputerName parameter. + 為 NewComputerName 參數指定的值與 ComputerName 參數的值相同。請為 NewComputerName 參數提供不同的值。 - "The password of the secure channel between '{0}' and '{1}' has been reset." + 「已重設 '{0}' 與 '{1}' 之間的安全通道密碼。」 - This command cannot be run due to the following error: the service cannot be started because it is disabled or does not have enabled devices associated with it. + 無法執行此命令，因為發生下列錯誤：服務無法啟動，因為它已停用，或沒有與其關聯的已啟用裝置。 - Creating a system restore point ... + 正在建立系統還原點... - Creating a system restore point... {0}% Completed. + 正在建立系統還原點... 已完成 {0}%。 - Completed. + 已完成。 - Try below options and Run the command again. -1. Verify that the target computer('{0}') is running. -2. Specify full computer name of the target computer('{0}'). + 請嘗試下列選項，然後再次執行命令。 +1. 確認目標電腦('{0}') 正在執行中。 +2. 指定目標電腦('{0}') 的完整電腦名稱。 - Failed to restart the computer {0}. Access rights {1} cannot be enabled for the calling process. + 無法重新啟動電腦 {0}。無法為呼叫處理程序啟用存取權限 {1}。 - Enable the {0} and restart the computer. + 啟用 {0} 並重新啟動電腦。 - Local shutdown access rights + 本機關機存取權限 - Remote shutdown access rights + 遠端關機存取權限 - Cannot wait for the local computer to restart. The local computer is ignored when the Wait parameter is specified. + 無法等候本機電腦重新啟動。指定 Wait 參數時，會忽略本機電腦。 - The parameters Timeout, For, and Delay are valid only when the parameter Wait is specified. + 只有在指定 Wait 參數時，Timeout、For 和 Delay 參數才有效。 - Restarting computers... + 正在重新啟動電腦... - Restarting computer {0} + 正在重新啟動電腦 {0} - Completed: {0}/{1}. + 已完成: {0}/{1}。 - Verifying that the computer has been restarted... + 正在確認電腦已重新啟動... - Waiting for PowerShell connectivity... + 正在等候 PowerShell 連線... - Waiting for the restart to begin... + 正在等候重新啟動開始... - Waiting for WinRM connectivity... + 正在等候 WinRM 連線... - Waiting for WMI connectivity... + 正在等候 WMI 連線... - Restart is complete + 重新啟動完成 - The combined service types are not supported for now. + 目前不支援合併的服務類型。 - Computer name {0} cannot be resolved with the exception: {1}. + 無法解析電腦名稱 {0}，例外狀況如下: {1}。 - The number of new names is not equal to the number of target computers. + 新名稱的數目不等於目標電腦的數目。 - Skip computer '{0}' with new name '{1}' because the new name is not valid. The new computer name entered is not properly formatted. Standard names may contain letters (a-z, A-Z), numbers (0-9), and hyphens (-), but no spaces or periods (.). The name may not consist entirely of digits, and may not be longer than 63 characters. + 因為新名稱無效，請略過電腦 '{0}'，其新名稱為 '{1}'。輸入的新電腦名稱格式不正確。Standard 名稱可包含字母 (a-z、A-Z)、數字 (0-9) 和連字號 (-)，但不能包含空格或句點 (.)。名稱不能全由數字組成，而且長度不能超過 63 個字元。 - Skip computer '{0}' with new name '{1}' because the new name is the same as the current name. + 略過電腦 '{0}'，其新名稱為 '{1}'，因為新名稱與目前名稱相同。 - Cannot remove computer '{0}' because it is not in a domain. + 無法移除電腦 '{0}'，因為它不在網域中。 - Failed to join computer '{0}' to workgroup '{1}' with the following error message: {2} + 無法將電腦 '{0}' 加入工作群組 '{1}'，錯誤訊息如下: {2} - Cannot remove computer(s) from the domain because the local network is down. + 無法從網域移除電腦，因為本機網路已中斷。 - Fail to rename computer '{0}' to '{1}' due to the following exception: {2}. + 無法將電腦 '{0}' 重新命名為 '{1}'，因為發生下列例外狀況: {2}。 - Join in domain '{0}' + 加入網域 '{0}' - Join in workgroup '{0}' + 加入工作群組 '{0}' - Cannot add computer '{0}' to domain '{1}' because it is already in that domain. + 無法將電腦 '{0}' 新增至網域 '{1}'，因為它已在該網域中。 - Cannot add computer '{0}' to workgroup '{1}' because it is already in that workgroup. + 無法將電腦 '{0}' 新增至工作群組 '{1}'，因為它已在該工作群組中。 - Computer '{0}' successfully joined the workgroup '{1}', but could not be renamed to '{2}' with the following error message: {3}. + 電腦 '{0}' 已成功加入工作群組 '{1}'，但無法重新命名為 '{2}'，錯誤訊息如下: {3}。 - Computer '{0}' was successfully unjoined from the domain '{1}', but it failed to join the workgroup '{2}' with the following error message: {3}. + 電腦 '{0}' 已成功取消加入網域 '{1}'，但無法加入工作群組 '{2}'，錯誤訊息如下: {3}。 - Failed to unjoin computer '{0}' from domain '{1}' with the following error message: {2}. + 無法將電腦 '{0}' 從網域 '{1}' 退出，錯誤訊息如下: {2}。 - Cannot establish the WMI connection to the computer '{0}' with the following error message: {1}. + 無法建立與電腦 '{0}' 的 WMI 連線，錯誤訊息如下: {1}。 - Computer '{0}' failed to join domain '{1}' from its current workgroup '{2}' with following error message: {3}. + 電腦 '{0}' 無法從目前的工作群組 '{1}' 加入網域 '{2}'，錯誤訊息如下: {3}。 - Computer '{0}' was successfully unjoined from domain '{1}', but failed to join the new domain '{2}' with the following error message: {3}. + 電腦 '{0}' 已成功取消加入網域 '{1}'，但無法加入新網域 '{2}'，錯誤訊息如下: {3}。 - Computer '{0}' was successfully joined to the new domain '{1}', but renaming it to '{2}' failed with the following error message: {3}. + 電腦 '{0}' 已成功加入新的網域 '{1}'，但重新命名為 '{2}' 失敗，錯誤訊息如下: {3}。 - The flag '{0}' is valid only if flag '{1}' is specified. + 旗標 '{0}' 只有在指定旗標 '{1}' 時才有效。 - Cannot rename multiple computers. The NewName parameter is valid only if a single computer is specified. + 無法重新命名多部電腦。只有在指定單一電腦時，NewName 參數才有效。 - Cannot find the computer account for the local computer in the domain {0}. + 在網域 {0} 中找不到本機電腦的電腦帳戶。 - Cannot find the computer account for the local computer from the domain controller {0}. + 在網域控制站 {0} 中找不到本機電腦的電腦帳戶。 - Cannot get domain information about the local computer because of the following exception: {0}. + 無法取得本機電腦的網域資訊，因為發生下列例外狀況: {0}。 - Cannot reset the secure channel password for the computer account in the domain. Operation failed with the following exception: {0}. + 無法重設網域中電腦帳戶的安全通道密碼。作業失敗，發生下列例外狀況: {0}。 - Resetting the secure channel password for the local computer failed with the following error message: {0}. + 重設本機電腦的安全通道密碼失敗，錯誤訊息如下: {0}。 - Administrator rights are required to reset the secure channel password on the local computer. Access is denied. + 重設本機電腦上的安全通道密碼需要系統管理員權限。存取遭到拒絕。 - Cannot reset the secure channel password for the account of the local computer. The local computer is not currently part of a domain. + 無法重設本機電腦的帳戶安全通道密碼。本機電腦目前不屬於任何網域。 - The NetBIOS name of the computer is limited to 15 bytes, which is 15 characters in this case. The NetBIOS name will be shortened to "{0}", which may cause conflicts under NetBIOS name resolution. Do you wish to continue? + 電腦的 NetBIOS 名稱限制為 15 個位元組，在此情況下即為 15 個字元。NetBIOS 名稱將縮短為 "{0}"，這可能會導致 NetBIOS 名稱解析發生衝突。是否要繼續? - NetBIOS name will be truncated. + NetBIOS 名稱將被截斷。 - The specified server name {0} cannot be resolved. + 無法解析指定的伺服器名稱 {0}。 - A new system restore point cannot be created because one has already been created within the past {0} minutes. The frequency of restore point creation can be changed by creating the DWORD value 'SystemRestorePointCreationFrequency' under the registry key 'HKLM\Software\Microsoft\Windows NT\CurrentVersion\SystemRestore'. The value of this registry key indicates the necessary time interval (in minutes) between two restore point creation. The default value is 1440 minutes (24 hours). + 無法建立新的系統還原點，因為在過去 {0} 分鐘內已建立一個還原點。您可以在登錄機碼 'HKLM\Software\Microsoft\Windows NT\CurrentVersion\SystemRestore' 下建立 DWORD 值 'SystemRestorePointCreationFrequency'，以變更還原點建立的頻率。此登錄機碼的值表示建立兩個還原點之間所需的時間間隔 (以分鐘為單位)。預設值為 1440 分鐘 (24 小時)。 - The Win32_OperatingSystem WMI object cannot be retrieved. + 無法擷取 Win32_OperatingSystem WMI 物件。 - The computer {0} is skipped. Fail to retrieve its LastBootUpTime via the WMI service with the following error message: {1}. + 已略過電腦 {0}。無法透過 WMI 服務擷取其 LastBootUpTime，錯誤訊息如下: {1}。 - Cannot verify the secure channel for the local computer. Operation failed with the following exception: {0}. + 無法驗證本機電腦的安全通道。作業失敗，發生下列例外狀況: {0}。 - The attempt to repair the secure channel between the local computer and the domain {0} has failed. + 嘗試修復本機電腦與網域 {0} 之間的安全通道失敗。 - The secure channel between the local computer and the domain {0} was successfully repaired. + 已成功修復本機電腦與網域 {0} 之間的安全通道。 - The secure channel between the local computer and the domain {0} is in good condition. + 本機電腦與網域 {0} 之間的安全通道狀況良好。 - The secure channel between the local computer and the domain {0} is broken. + 本機電腦與網域 {0} 之間的安全通道已中斷。 - Cannot verify the secure channel password for the local computer. The local computer is not currently part of a domain. + 無法驗證本機電腦的安全通道密碼。本機電腦目前不屬於任何網域。 - The operation cannot be performed because the system restore APIs are not supported on the Advanced RISC Machine (ARM) platform. + 無法執行作業，因為 Advanced RISC Machine (ARM) 平台不支援系統還原 API。 - The computer did not finish restarting within the specified time-out period. + 電腦未在指定的逾時期間內完成重新啟動。 - Cannot validate the time interval for restore point creation. It failed to retrieve the last restore point with the following error message: {0}. + 無法驗證建立還原點的時間間隔。無法擷取上一個還原點，錯誤訊息如下: {0}。 - The AsJob Parameter Set is not supported. + 不支援 AsJob 參數集。 - The {0} parameter is not supported for CoreCLR. + CoreCLR 不支援 {0} 參數。 - The required native command 'shutdown' was not found. + 找不到必要的原生命令 'shutdown'。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hant/TestConnectionResources.zh-Hant.resx b/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hant/TestConnectionResources.zh-Hant.resx index 8f01dca03fd..88a88c451e1 100644 --- a/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hant/TestConnectionResources.zh-Hant.resx +++ b/src/Microsoft.PowerShell.Commands.Management/resources/zh-Hant/TestConnectionResources.zh-Hant.resx @@ -118,15 +118,15 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Testing connection to computer '{0}' failed: {1} + 測試與電腦 '{0}' 的連線失敗: {1} - Cannot resolve the target name. + 無法解析目標名稱。 - Target IPv4/IPv6 address absent. + 缺少目標 IPv4/IPv6 位址。 - Cannot complete traceroute to destination '{0}': Number of hops required to reach host exceeds MaxHops ({1}). + 無法完成到目的地 '{0}' 的路由追蹤: 到達主機所需的躍點數超過 MaxHops ({1})。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/de/AddMember.de.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/de/AddMember.de.resx index e7ce64965ab..52a27edba00 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/de/AddMember.de.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/de/AddMember.de.resx @@ -118,42 +118,42 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - To add a member, only one member type can be specified. The member types specified are: "{0}" + Zum Hinzufügen eines Members kann nur ein Membertyp angegeben werden. Die angegebenen Membertypen sind: „{0}“. - Cannot add a member with type "{0}". Specify a different type for the MemberTypes parameter. + Ein Member vom Typ „{0}“ kann nicht hinzugefügt werden. Geben Sie für den MemberTypes-Parameter einen anderen Typ an. - The SecondValue parameter is not necessary for a member of type "{0}", and should not be specified. Do not specify the SecondValue parameter when you add members of this type. + Der SecondValue-Parameter ist für einen Member vom Typ „{0}“ nicht erforderlich und sollte nicht angegeben werden. Geben Sie den SecondValue-Parameter nicht an, wenn Sie Members dieses Typs hinzufügen. - The Value parameter is required for a member of type "{0}". Specify the Value parameter when adding members of this type. + Der Value-Parameter ist für einen Member vom Typ „{0}“ erforderlich. Geben Sie den Parameter Value an, wenn Sie Members dieses Typs hinzufügen. - Both Value and SecondValue parameters should not be null for a member of type "{0}". Specify a non-null value for one of the two parameters. + Sowohl der Value- als auch der SecondValue-Parameter dürfen für einen Member vom Typ „{0}“ nicht beide NULL sein. Geben Sie für einen der beiden Parameter einen Wert ungleich NULL an. - Cannot add a member with the name "{0}" because a member with that name already exists. To overwrite the member anyway, add the Force parameter to your command. + Ein Member mit dem Namen „{0}“ kann nicht hinzugefügt werden, da bereits ein Member mit diesem Namen vorhanden ist. Wenn der Member trotzdem überschrieben werden soll, fügen Sie Ihrem Befehl den Parameter Force hinzu. - Cannot force the member with name "{0}" and type "{1}" to be added. A member with that name and type already exists, and the existing member is not an instance extension. + Das Hinzufügen des Members mit dem Namen „{0}“ und dem Typ „{1}“ kann nicht erzwungen werden. Ein Member mit diesem Namen und Typ ist bereits vorhanden, und der vorhandene Member ist keine Instanzerweiterung. - The member referenced by this alias should not be null or empty. + Der Member, auf den dieser Alias verweist, darf nicht NULL oder leer sein. - The Value parameter should not be null for a member of type "{0}". Specify a non-null value for the Value parameter when adding members of this type. + Der Value-Parameter darf für einen Member vom Typ „{0}“ nicht NULL sein. Geben Sie beim Hinzufügen von Members dieses Typs einen Wert ungleich NULL für den Parameter Value an. - The SecondValue parameter should not be null for a member of type "{0}". Specify a non-null value for the SecondValue parameter when adding members of this type. + Der SecondValue-Parameter darf für einen Member vom Typ „{0}“ nicht NULL sein. Geben Sie beim Hinzufügen von Members dieses Typs einen Wert ungleich NULL für den SecondValue-Parameter an. - The parameter NotePropertyName cannot take values that could be converted to the type {0}. To define the name of a member with those values, use Add-Member, and specify the member type. + Der NotePropertyName-Parameter kann keine Werte annehmen, die in den Typ „{0}“ konvertiert werden können. Wenn Sie den Namen eines Members mit diesen Werten definieren möchten, verwenden Sie Add-Member, und geben Sie den Membertyp an. - The name for a NoteProperty member should not be null or an empty string. + Der Name für einen NoteProperty-Member darf nicht NULL oder eine leere Zeichenfolge sein. - The TypeName parameter should not be null, empty, or contain only white spaces. + Der TypeName-Parameter darf nicht NULL oder leer sein oder nur Leerzeichen enthalten. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/de/AliasCommandStrings.de.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/de/AliasCommandStrings.de.resx index abb7afc3de7..4e4b4751e8e 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/de/AliasCommandStrings.de.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/de/AliasCommandStrings.de.resx @@ -118,54 +118,54 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Set Alias + Alias festlegen - Name: {0} Value: {1} + Name: {0} Wert: {1} - New Alias + Neuer Alias - Name: {0} Value: {1} + Name: {0} Wert: {1} - Import Alias + Alias importieren - Name: {0} Value: {1} + Name: {0} Wert: {1} - Cannot open file {0} to export the alias. {1} + Die Datei „{0}“ kann nicht geöffnet werden, um den Alias zu exportieren. {1} - Alias File + Aliasdatei - Exported by : {0} + Exportiert von: {0} - Date/Time : {0:F} + Datum/Zeit: {0:F} Computer : {0} - Cannot import the alias because the specified path '{0}' referred to a '{1}' provider path. Change the value of the Path parameter to a file system path. + Der Alias kann nicht importiert werden, da der angegebene Pfad „{0}“ auf einen Anbieterpfad vom Typ „{1}“ verweist. Ändern Sie den Wert des Path-Parameters in einen Dateisystempfad. - Cannot import alias because path '{0}' contains wildcard characters that resolve to multiple paths. Aliases can be imported from only one file. Change the value of the Path parameter to a path that resolves to a single file. + Der Alias kann nicht importiert werden, da der Pfad „{0}“ Platzhalterzeichen enthält, die zu mehreren Pfaden aufgelöst werden. Aliase können nur aus einer Datei importiert werden. Ändern Sie den Wert des Path-Parameters in einen Pfad, der zu einer einzelnen Datei aufgelöst wird. - Cannot open file {0} to import the alias. {1} + Die Datei „{0}“ kann nicht geöffnet werden, um den Alias zu importieren. {1} - Cannot import an alias. Line number {1} in the file '{0}' is not a properly-formatted, comma-separated values (CSV) line for aliases. Change the line to contain four values separated by commas. If the value text itself contains a comma, then the value must be contained in quotation marks. + Ein Alias kann nicht importiert werden. Zeilennummer {1} in der Datei „{0}“ ist keine ordnungsgemäß formatierte CSV-Zeile (Comma-Separated Values) für Aliase. Ändern Sie die Zeile so, dass sie vier durch Kommas getrennte Werte enthält. Wenn der Werttext selbst ein Komma enthält, muss der Wert in Anführungszeichen stehen. - Cannot import the alias because line number {1} in the file '{0}' contains an option that is not recognized for aliases. Change the file to contain valid options. + Der Alias kann nicht importiert werden, da die Zeilennummer {1} in der Datei „{0}“ eine Option enthält, die für Aliase nicht erkannt wird. Ändern Sie die Datei so, dass sie gültige Optionen enthält. - This command cannot find a matching alias because an alias with the {0} '{1}' does not exist. + Dieser Befehl kann keinen passenden Alias finden, da ein Alias mit dem {0} „{1}“ nicht vorhanden ist. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/de/ConvertHTMLStrings.de.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/de/ConvertHTMLStrings.de.resx index 865447e08b4..3f92a671855 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/de/ConvertHTMLStrings.de.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/de/ConvertHTMLStrings.de.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Accepted meta properties are content-type, default-style, application-name, author, description, generator, keywords, x-ua-compatible, and viewport. The meta pair: {0} and {1} may not function correctly. + Zulässige Metaeigenschaften sind content-type, default-style, application-name, author, description, generator, keywords, x-ua-compatible und viewport. Das Metapaar „{0}“ und „{1}“ funktioniert möglicherweise nicht korrekt. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/es/AddMember.es.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/es/AddMember.es.resx index e7ce64965ab..48133654d74 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/es/AddMember.es.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/es/AddMember.es.resx @@ -118,42 +118,42 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - To add a member, only one member type can be specified. The member types specified are: "{0}" + Para agregar un miembro, solo se puede especificar un tipo de miembro. Los tipos de miembro especificados son: "{0}" - Cannot add a member with type "{0}". Specify a different type for the MemberTypes parameter. + No se puede agregar un miembro con el tipo "{0}". Especifique un tipo diferente para el parámetro MemberTypes. - The SecondValue parameter is not necessary for a member of type "{0}", and should not be specified. Do not specify the SecondValue parameter when you add members of this type. + El parámetro SecondValue no es necesario para un miembro de tipo "{0}" y no debe especificarse. No especifique el parámetro SecondValue al agregar miembros de este tipo. - The Value parameter is required for a member of type "{0}". Specify the Value parameter when adding members of this type. + El parámetro Value es necesario para un miembro de tipo "{0}". Especifique el parámetro Value al agregar miembros de este tipo. - Both Value and SecondValue parameters should not be null for a member of type "{0}". Specify a non-null value for one of the two parameters. + Los parámetros Value y SecondValue no deben ser null para un miembro de tipo "{0}". Especifique un valor distinto de NULL para uno de los dos parámetros. - Cannot add a member with the name "{0}" because a member with that name already exists. To overwrite the member anyway, add the Force parameter to your command. + No se puede agregar un miembro con el nombre "{0}" porque ya existe un miembro con ese nombre. Para sobrescribir el miembro de todos modos, agregue el parámetro Force al comando. - Cannot force the member with name "{0}" and type "{1}" to be added. A member with that name and type already exists, and the existing member is not an instance extension. + No se puede forzar la adición del miembro con el nombre "{0}" y el tipo "{1}". Ya existe un miembro con ese nombre y tipo, y el miembro existente no es una extensión de instancia. - The member referenced by this alias should not be null or empty. + El miembro al que hace referencia este alias no debe ser nulo ni estar vacío. - The Value parameter should not be null for a member of type "{0}". Specify a non-null value for the Value parameter when adding members of this type. + El parámetro Value no debe ser null para un miembro de tipo "{0}". Especifique un valor distinto de NULL para el parámetro Value al agregar miembros de este tipo. - The SecondValue parameter should not be null for a member of type "{0}". Specify a non-null value for the SecondValue parameter when adding members of this type. + El parámetro SecondValue no debe ser null para un miembro de tipo "{0}". Especifique un valor distinto de NULL para el parámetro SecondValue al agregar miembros de este tipo. - The parameter NotePropertyName cannot take values that could be converted to the type {0}. To define the name of a member with those values, use Add-Member, and specify the member type. + El parámetro NotePropertyName no puede tomar valores que se puedan convertir al tipo {0}. Para definir el nombre de un miembro con esos valores, use Add-Member y especifique el tipo de miembro. - The name for a NoteProperty member should not be null or an empty string. + El nombre de un miembro NoteProperty no debe ser nulo ni una cadena vacía. - The TypeName parameter should not be null, empty, or contain only white spaces. + El parámetro TypeName no debe ser nulo, estar vacío ni contener solo espacios en blanco. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/fr/AddMember.fr.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/fr/AddMember.fr.resx index e7ce64965ab..2c49e9cde82 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/fr/AddMember.fr.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/fr/AddMember.fr.resx @@ -118,42 +118,42 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - To add a member, only one member type can be specified. The member types specified are: "{0}" + Pour ajouter un membre, vous ne pouvez spécifier qu’un seul type de membre. Les types de membres spécifiés sont : « {0} » - Cannot add a member with type "{0}". Specify a different type for the MemberTypes parameter. + Impossible d’ajouter un membre de type « {0} ». Spécifiez un type différent pour le paramètre MemberTypes. - The SecondValue parameter is not necessary for a member of type "{0}", and should not be specified. Do not specify the SecondValue parameter when you add members of this type. + Le paramètre SecondValue n’est pas nécessaire pour un membre de type « {0} » et ne doit pas être spécifié. Ne spécifiez pas le paramètre SecondValue lorsque vous ajoutez des membres de ce type. - The Value parameter is required for a member of type "{0}". Specify the Value parameter when adding members of this type. + Le paramètre Value est requis pour un membre de type « {0} ». Spécifiez le paramètre Value lorsque vous ajoutez des membres de ce type. - Both Value and SecondValue parameters should not be null for a member of type "{0}". Specify a non-null value for one of the two parameters. + Les paramètres Value et SecondValue ne doivent pas être null pour un membre de type « {0} ». Spécifiez une valeur non nulle pour l’un des deux paramètres. - Cannot add a member with the name "{0}" because a member with that name already exists. To overwrite the member anyway, add the Force parameter to your command. + Impossible d’ajouter un membre portant le nom « {0} ». car un membre portant ce nom existe déjà. Pour remplacer tout de même le membre, ajoutez le paramètre Force à votre commande. - Cannot force the member with name "{0}" and type "{1}" to be added. A member with that name and type already exists, and the existing member is not an instance extension. + Impossible de forcer l’ajout du membre portant le nom « {0} ». et le type « {1} ».. Un membre de ce nom et de ce type existe déjà, et le membre existant n’est pas une extension d’instance. - The member referenced by this alias should not be null or empty. + Le membre référencé par cet alias ne doit pas être null ni vide. - The Value parameter should not be null for a member of type "{0}". Specify a non-null value for the Value parameter when adding members of this type. + Le paramètre Value ne doit pas être null pour un membre de type « {0} ». Spécifiez une valeur non nulle pour le paramètre Value lorsque vous ajoutez des membres de ce type. - The SecondValue parameter should not be null for a member of type "{0}". Specify a non-null value for the SecondValue parameter when adding members of this type. + Le paramètre SecondValue ne doit pas être null pour un membre de type « {0} ». Spécifiez une valeur non nulle pour le paramètre SecondValue lorsque vous ajoutez des membres de ce type. - The parameter NotePropertyName cannot take values that could be converted to the type {0}. To define the name of a member with those values, use Add-Member, and specify the member type. + Le paramètre NotePropertyName ne peut pas prendre de valeurs pouvant être converties en type {0}. Pour définir le nom d’un membre avec ces valeurs, utilisez Add-Member et spécifiez le type de membre. - The name for a NoteProperty member should not be null or an empty string. + Le nom d’un membre NoteProperty ne doit pas être null ni une chaîne vide. - The TypeName parameter should not be null, empty, or contain only white spaces. + Le paramètre TypeName ne doit pas être null, vide ou contenir uniquement des espaces. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/fr/AliasCommandStrings.fr.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/fr/AliasCommandStrings.fr.resx index abb7afc3de7..907326d66b4 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/fr/AliasCommandStrings.fr.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/fr/AliasCommandStrings.fr.resx @@ -118,54 +118,54 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Set Alias + Définir un alias - Name: {0} Value: {1} + Nom : {0}Valeur : {1} - New Alias + Nouvel alias - Name: {0} Value: {1} + Nom : {0}Valeur : {1} - Import Alias + Importer un alias - Name: {0} Value: {1} + Nom : {0}Valeur : {1} - Cannot open file {0} to export the alias. {1} + Nous ne pouvons pas ouvrir le fichier {0} pour exporter l’alias. {1} - Alias File + Fichier d’alias - Exported by : {0} + Exporté par : {0} - Date/Time : {0:F} + Date/Heure : {0:F} - Computer : {0} + Ordinateur : {0} - Cannot import the alias because the specified path '{0}' referred to a '{1}' provider path. Change the value of the Path parameter to a file system path. + Nous ne pouvons pas importer l’alias, car le chemin spécifié « {0} » faisait référence à un chemin d’accès de fournisseur « {1} ». Modifiez la valeur du paramètre Path pour qu’elle pointe vers un chemin d’accès du système de fichiers. - Cannot import alias because path '{0}' contains wildcard characters that resolve to multiple paths. Aliases can be imported from only one file. Change the value of the Path parameter to a path that resolves to a single file. + Nous ne pouvons pas importer l’alias, car le chemin d’accès « {0} » contient des caractères génériques qui se résolvent en plusieurs chemins. Vous pouvez importer des alias à partir d’un seul fichier uniquement. Modifiez la valeur du paramètre Path pour qu’elle pointe vers un seul fichier. - Cannot open file {0} to import the alias. {1} + Nous ne pouvons pas ouvrir le fichier {0} pour importer l’alias. {1} - Cannot import an alias. Line number {1} in the file '{0}' is not a properly-formatted, comma-separated values (CSV) line for aliases. Change the line to contain four values separated by commas. If the value text itself contains a comma, then the value must be contained in quotation marks. + Nous ne pouvons pas importer un alias. Le numéro de ligne {1} dans le fichier « {0} » n’est pas une ligne CSV correctement mise en forme et à valeurs séparées par une virgule pour les alias. Modifiez la ligne pour qu’elle contienne quatre valeurs séparées par des virgules. Si le texte de la valeur contient lui-même une virgule, la valeur doit alors être placée entre guillemets. - Cannot import the alias because line number {1} in the file '{0}' contains an option that is not recognized for aliases. Change the file to contain valid options. + Nous ne pouvons pas importer l’alias, car le numéro de ligne {1} dans le fichier « {0} » contient une option qui n’est pas reconnue pour les alias. Modifiez le fichier pour qu’il contienne des options valides. - This command cannot find a matching alias because an alias with the {0} '{1}' does not exist. + Cette commande ne peut pas trouver d’alias correspondant, car aucun alias ayant le {0} « {1} » n’existe. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/fr/ConvertHTMLStrings.fr.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/fr/ConvertHTMLStrings.fr.resx index 865447e08b4..8da6df83674 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/fr/ConvertHTMLStrings.fr.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/fr/ConvertHTMLStrings.fr.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Accepted meta properties are content-type, default-style, application-name, author, description, generator, keywords, x-ua-compatible, and viewport. The meta pair: {0} and {1} may not function correctly. + Les propriétés méta acceptées sont content-type, default-style, application-name, author, description, generator, keywords, x-ua-compatible et viewport. La paire méta : {0} et {1} peut ne pas fonctionner correctement. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/it/AliasCommandStrings.it.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/it/AliasCommandStrings.it.resx index abb7afc3de7..e1a7bfc3e26 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/it/AliasCommandStrings.it.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/it/AliasCommandStrings.it.resx @@ -118,54 +118,54 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Set Alias + Set-Alias - Name: {0} Value: {1} + Nome: {0} Valore: {1} - New Alias + Nuovo alias - Name: {0} Value: {1} + Nome: {0} Valore: {1} - Import Alias + Import-Alias - Name: {0} Value: {1} + Nome: {0} Valore: {1} - Cannot open file {0} to export the alias. {1} + Non è possibile aprire il file {0} per esportare l'alias. {1} - Alias File + File alias - Exported by : {0} + Esportato da: {0} - Date/Time : {0:F} + Data/ora: {0:F} - Computer : {0} + Computer: {0} - Cannot import the alias because the specified path '{0}' referred to a '{1}' provider path. Change the value of the Path parameter to a file system path. + Non è possibile importare l'alias perché il percorso specificato ''{0}'' fa riferimento a un percorso del provider ''{1}''. Modificare il valore del parametro Path in un percorso file system. - Cannot import alias because path '{0}' contains wildcard characters that resolve to multiple paths. Aliases can be imported from only one file. Change the value of the Path parameter to a path that resolves to a single file. + Non è possibile importare l'alias perché il percorso ''{0}'' contiene caratteri jolly che vengono risolti in più percorsi. Gli alias possono essere importati da un solo file. Modificare il valore del parametro Path in un percorso che si risolve in un singolo file. - Cannot open file {0} to import the alias. {1} + Non è possibile aprire il file {0} per importare l'alias. {1} - Cannot import an alias. Line number {1} in the file '{0}' is not a properly-formatted, comma-separated values (CSV) line for aliases. Change the line to contain four values separated by commas. If the value text itself contains a comma, then the value must be contained in quotation marks. + Non è possibile importare un alias. Il numero di riga {1} nel file ''{0}'' non è una riga con valori delimitati da virgole (CSV) formattata correttamente per gli alias. Modificare la riga in modo che contenga quattro valori separati da virgole. Se il testo del valore contiene una virgola, il valore deve essere racchiuso tra virgolette. - Cannot import the alias because line number {1} in the file '{0}' contains an option that is not recognized for aliases. Change the file to contain valid options. + Non è possibile importare l'alias perché il numero di riga {1} nel file ''{0}'' contiene un'opzione non riconosciuta per gli alias. Modificare il file in modo che contenga opzioni valide. - This command cannot find a matching alias because an alias with the {0} '{1}' does not exist. + Non è possibile trovare un alias corrispondente perché non esiste un alias con {0} ''{1}''. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/ja/AddMember.ja.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/ja/AddMember.ja.resx index e7ce64965ab..9067fc26f7b 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/ja/AddMember.ja.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/ja/AddMember.ja.resx @@ -118,42 +118,42 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - To add a member, only one member type can be specified. The member types specified are: "{0}" + メンバーを追加するには、1 つのメンバー型のみを指定できます。指定されたメンバー型は "{0}" です - Cannot add a member with type "{0}". Specify a different type for the MemberTypes parameter. + 型が "{0}" のメンバーを追加できません。MemberTypes パラメーターに別の型を指定します。 - The SecondValue parameter is not necessary for a member of type "{0}", and should not be specified. Do not specify the SecondValue parameter when you add members of this type. + SecondValue パラメーターは、型 "{0}" のメンバーには必要ありません。指定しないでください。この型のメンバーを追加するときは、SecondValue パラメーターを指定しないでください。 - The Value parameter is required for a member of type "{0}". Specify the Value parameter when adding members of this type. + 型 "{0}" のメンバーには Value パラメーターが必要です。この型のメンバーを追加するときは、Value パラメーターを指定します。 - Both Value and SecondValue parameters should not be null for a member of type "{0}". Specify a non-null value for one of the two parameters. + 型 "{0}" のメンバーの Value パラメーターと SecondValue パラメーターの両方を null 値にすることはできません。2 つのパラメーターのいずれかに null 値以外の値を指定します。 - Cannot add a member with the name "{0}" because a member with that name already exists. To overwrite the member anyway, add the Force parameter to your command. + "{0}" という名前のメンバーは既に存在するため、追加できません。メンバーを上書きするには、Force パラメーターをコマンドに追加します。 - Cannot force the member with name "{0}" and type "{1}" to be added. A member with that name and type already exists, and the existing member is not an instance extension. + 名前が "{0}"、型 ”{1}” のメンバーを強制的に追加できません。その名前と型のメンバーは既に存在し、既存のメンバーはインスタンス拡張機能ではありません。 - The member referenced by this alias should not be null or empty. + このエイリアスによって参照されるメンバーを null または空にすることはできません。 - The Value parameter should not be null for a member of type "{0}". Specify a non-null value for the Value parameter when adding members of this type. + 型 "{0}" のメンバーの Value パラメーターを null 値にすることはできません。この型のメンバーを追加するときに、Value パラメーターに null 値以外の値を指定します。 - The SecondValue parameter should not be null for a member of type "{0}". Specify a non-null value for the SecondValue parameter when adding members of this type. + 型 "{0}" のメンバーに対して SecondValue パラメーターを null 値にすることはできません。この型のメンバーを追加するときは、SecondValue パラメーターに null 値以外の値を指定します。 - The parameter NotePropertyName cannot take values that could be converted to the type {0}. To define the name of a member with those values, use Add-Member, and specify the member type. + パラメーター NotePropertyName は、型 {0} に変換できる値を受け取ることはできません。これらの値を持つメンバーの名前を定義するには、Add-Member を使用し、メンバーの種類を指定します。 - The name for a NoteProperty member should not be null or an empty string. + NoteProperty メンバーの名前を null 値または空の文字列にすることはできません。 - The TypeName parameter should not be null, empty, or contain only white spaces. + TypeName パラメーターには、null 値、空、または空白のみを含めることはできません。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/ja/AliasCommandStrings.ja.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/ja/AliasCommandStrings.ja.resx index abb7afc3de7..8b90745e10b 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/ja/AliasCommandStrings.ja.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/ja/AliasCommandStrings.ja.resx @@ -118,54 +118,54 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Set Alias + エイリアスの設定 - Name: {0} Value: {1} + 名前: {0}、値: {1} - New Alias + 新しいエイリアス - Name: {0} Value: {1} + 名前: {0}、値: {1} - Import Alias + エイリアスのインポート - Name: {0} Value: {1} + 名前: {0}、値: {1} - Cannot open file {0} to export the alias. {1} + ファイル {0} を開いてエイリアスをエクスポートすることはできません。{1} - Alias File + エイリアス ファイル - Exported by : {0} + エクスポートしたユーザー: {0} - Date/Time : {0:F} + 日付/時刻 : {0:F} - Computer : {0} + コンピューター: {0} - Cannot import the alias because the specified path '{0}' referred to a '{1}' provider path. Change the value of the Path parameter to a file system path. + 指定されたパス '{0}' が '{1}' プロバイダー パスを参照しているため、エイリアスをインポートできません。Path パラメーターの値をファイル システム パスに変更します。 - Cannot import alias because path '{0}' contains wildcard characters that resolve to multiple paths. Aliases can be imported from only one file. Change the value of the Path parameter to a path that resolves to a single file. + パス '{0}' に複数のパスに解決されるワイルドカード文字が含まれているため、エイリアスをインポートできません。エイリアスは 1 つのファイルからのみインポートできます。Path パラメーターの値を、1 つのファイルに解決されるパスに変更します。 - Cannot open file {0} to import the alias. {1} + ファイル {0} を開いてエイリアスをインポートできません。{1} - Cannot import an alias. Line number {1} in the file '{0}' is not a properly-formatted, comma-separated values (CSV) line for aliases. Change the line to contain four values separated by commas. If the value text itself contains a comma, then the value must be contained in quotation marks. + エイリアスをインポートできません。ファイル '{0}' の行番号 {1} は、エイリアスの正しい形式のコンマ区切り値 (CSV) 行ではありません。コンマで区切られた 4 つの値を含む行を変更します。値のテキスト自体にコンマが含まれている場合は、値を引用符で囲む必要があります。 - Cannot import the alias because line number {1} in the file '{0}' contains an option that is not recognized for aliases. Change the file to contain valid options. + ファイル '{0}' 内の行番号 {1} にエイリアスで認識されないオプションが含まれているため、エイリアスをインポートできません。有効なオプションを含むファイルを変更します。 - This command cannot find a matching alias because an alias with the {0} '{1}' does not exist. + {0} '{1}' のエイリアスが存在しないため、このコマンドは一致するエイリアスを見つけることができません。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/pl/AddMember.pl.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/pl/AddMember.pl.resx index e7ce64965ab..c65fccfb728 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/pl/AddMember.pl.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/pl/AddMember.pl.resx @@ -118,42 +118,42 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - To add a member, only one member type can be specified. The member types specified are: "{0}" + Aby dodać element członkowski, można określić tylko jeden typ elementu członkowskiego. Określone typy składowych to: „{0}” - Cannot add a member with type "{0}". Specify a different type for the MemberTypes parameter. + Nie można dodać elementu członkowskiego o typie „{0}”. Określ inny typ parametru MemberTypes. - The SecondValue parameter is not necessary for a member of type "{0}", and should not be specified. Do not specify the SecondValue parameter when you add members of this type. + Parametr SecondValue nie jest niezbędny dla składowej typu „{0}” i nie powinien być określony. Nie określaj parametru SecondValue podczas dodawania elementów członkowskich tego typu. - The Value parameter is required for a member of type "{0}". Specify the Value parameter when adding members of this type. + Parametr Value jest wymagany dla składowej typu „{0}”. Określ parametr Value podczas dodawania elementów członkowskich tego typu. - Both Value and SecondValue parameters should not be null for a member of type "{0}". Specify a non-null value for one of the two parameters. + Parametry Value i SecondValue nie powinny mieć wartości null dla składowej typu „{0}”. Określ wartość inną niż null dla jednego z dwóch parametrów. - Cannot add a member with the name "{0}" because a member with that name already exists. To overwrite the member anyway, add the Force parameter to your command. + Nie można dodać członka o nazwie „{0}”, ponieważ element członkowski o tej nazwie już istnieje. Aby mimo to zastąpić element członkowski, dodaj parametr Force do polecenia. - Cannot force the member with name "{0}" and type "{1}" to be added. A member with that name and type already exists, and the existing member is not an instance extension. + Nie można wymusić dodania składowej o nazwie „{0}” i typie „{1}”. Element członkowski o tej nazwie i typie już istnieje, a istniejący element członkowski nie jest rozszerzeniem wystąpienia. - The member referenced by this alias should not be null or empty. + Element członkowski, do którego odwołuje się ten alias, nie powinien mieć wartości null ani być pusty. - The Value parameter should not be null for a member of type "{0}". Specify a non-null value for the Value parameter when adding members of this type. + Parametr Value nie powinien mieć wartości null dla składowej typu „{0}”. Określ wartość inną niż null dla parametru Value podczas dodawania elementów członkowskich tego typu. - The SecondValue parameter should not be null for a member of type "{0}". Specify a non-null value for the SecondValue parameter when adding members of this type. + Parametr SecondValue nie powinien mieć wartości null dla składowej typu „{0}”. Określ wartość inną niż null dla parametru SecondValue podczas dodawania elementów członkowskich tego typu. - The parameter NotePropertyName cannot take values that could be converted to the type {0}. To define the name of a member with those values, use Add-Member, and specify the member type. + Parametr NotePropertyName nie może przyjmować wartości, które można przekonwertować na typ {0}. Aby zdefiniować nazwę elementu członkowskiego z tymi wartościami, użyj polecenia Add-Member i określ typ elementu członkowskiego. - The name for a NoteProperty member should not be null or an empty string. + Nazwa elementu członkowskiego NoteProperty nie może mieć wartości null ani być pustym ciągiem. - The TypeName parameter should not be null, empty, or contain only white spaces. + Parametr TypeName nie powinien mieć wartości null, być pusty ani zawierać tylko białych znaków. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/pl/AliasCommandStrings.pl.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/pl/AliasCommandStrings.pl.resx index abb7afc3de7..094bb085efc 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/pl/AliasCommandStrings.pl.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/pl/AliasCommandStrings.pl.resx @@ -118,54 +118,54 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Set Alias + Ustaw alias - Name: {0} Value: {1} + Nazwa: {0} Wartość: {1} - New Alias + Nowy alias - Name: {0} Value: {1} + Nazwa: {0} Wartość: {1} - Import Alias + Importuj alias - Name: {0} Value: {1} + Nazwa: {0} Wartość: {1} - Cannot open file {0} to export the alias. {1} + Nie można otworzyć pliku {0} w celu wyeksportowania aliasu. {1} - Alias File + Plik aliasu - Exported by : {0} + Wyeksportowane przez: {0} - Date/Time : {0:F} + Data/godzina: {0:F} - Computer : {0} + Komputer: {0} - Cannot import the alias because the specified path '{0}' referred to a '{1}' provider path. Change the value of the Path parameter to a file system path. + Nie można zaimportować aliasu, ponieważ określona ścieżka „{0}” odwołuje się do ścieżki dostawcy „{1}”. Zmień wartość parametru Path na ścieżkę systemu plików. - Cannot import alias because path '{0}' contains wildcard characters that resolve to multiple paths. Aliases can be imported from only one file. Change the value of the Path parameter to a path that resolves to a single file. + Nie można zaimportować aliasu, ponieważ ścieżka „{0}” zawiera symbole wieloznaczne rozpoznane jako wiele ścieżek. Aliasy można importować tylko z jednego pliku. Zmień wartość parametru Path na ścieżkę rozpoznaną jako pojedynczy plik. - Cannot open file {0} to import the alias. {1} + Nie można otworzyć pliku {0} w celu zaimportowania aliasu. {1} - Cannot import an alias. Line number {1} in the file '{0}' is not a properly-formatted, comma-separated values (CSV) line for aliases. Change the line to contain four values separated by commas. If the value text itself contains a comma, then the value must be contained in quotation marks. + Nie można zaimportować aliasu. Numer wiersza {1} w pliku „{0}” nie jest poprawnie sformatowanym wierszem wartości rozdzielanych przecinkami (CSV) dla aliasów. Zmień wiersz tak, aby zawierał cztery wartości oddzielone przecinkami. Jeśli tekst wartości zawiera przecinek, wartość musi być zawarta w cudzysłowie. - Cannot import the alias because line number {1} in the file '{0}' contains an option that is not recognized for aliases. Change the file to contain valid options. + Nie można zaimportować aliasu, ponieważ numer wiersza {1} w pliku „{0}” zawiera opcję, która nie jest rozpoznawana dla aliasów. Zmień plik tak, aby zawierał prawidłowe opcje. - This command cannot find a matching alias because an alias with the {0} '{1}' does not exist. + To polecenie nie może odnaleźć pasującego aliasu, ponieważ alias z elementem {0} „{1}” nie istnieje. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/tr/AddMember.tr.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/tr/AddMember.tr.resx index e7ce64965ab..585646fba3b 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/tr/AddMember.tr.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/tr/AddMember.tr.resx @@ -118,42 +118,42 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - To add a member, only one member type can be specified. The member types specified are: "{0}" + Üye eklemek için yalnızca bir üye türü belirtilebilir. Belirtilen üye türleri: "{0}" - Cannot add a member with type "{0}". Specify a different type for the MemberTypes parameter. + "{0}" türünde bir üye eklenemez. MemberType parametresi için farklı bir tür belirtin. - The SecondValue parameter is not necessary for a member of type "{0}", and should not be specified. Do not specify the SecondValue parameter when you add members of this type. + "{0}" türündeki bir üye için SecondValue parametresi gerekli değildir ve belirtilmemelidir. Bu türde üyeler eklerken SecondValue parametresini belirtmeyin. - The Value parameter is required for a member of type "{0}". Specify the Value parameter when adding members of this type. + "{0}" türündeki bir üye için Value parametresi gereklidir. Bu türde üyeler eklerken Value parametresini belirtin. - Both Value and SecondValue parameters should not be null for a member of type "{0}". Specify a non-null value for one of the two parameters. + "{0}" türündeki bir üye için Value ve SecondValue parametrelerinin ikisi de null olmamalıdır. İki parametreden biri için null olmayan bir değer belirtin. - Cannot add a member with the name "{0}" because a member with that name already exists. To overwrite the member anyway, add the Force parameter to your command. + Bu ada sahip bir üye zaten mevcut olduğundan "{0}" adlı bir üye eklenemiyor. Yine de mevcut üyenin üzerine yazmak için komutunuza Force parametresini ekleyin. - Cannot force the member with name "{0}" and type "{1}" to be added. A member with that name and type already exists, and the existing member is not an instance extension. + Adı "{0}" ve türü "{1}" olan üyenin eklenmesi zorlanamıyor. Bu ada ve türe sahip bir üye zaten var ve mevcut üye bir örnek uzantısı değil. - The member referenced by this alias should not be null or empty. + Bu diğer adın başvurduğu üye null veya boş olmamalıdır. - The Value parameter should not be null for a member of type "{0}". Specify a non-null value for the Value parameter when adding members of this type. + Value parametresi "{0}" türündeki bir üye için null olmamalıdır. Bu türde üyeler eklerken Value parametresi için null olmayan bir değer belirtin. - The SecondValue parameter should not be null for a member of type "{0}". Specify a non-null value for the SecondValue parameter when adding members of this type. + SecondValue parametresi "{0}" türündeki bir üye için null olmamalıdır. Bu türde üyeler eklerken SecondValue parametresi için null olmayan bir değer belirtin. - The parameter NotePropertyName cannot take values that could be converted to the type {0}. To define the name of a member with those values, use Add-Member, and specify the member type. + NotePropertyName parametresi {0} türüne dönüştürülebilecek değerleri alamaz. Bu değerlerle bir üyenin adını tanımlamak için Add-Member kullanın ve üye türünü belirtin. - The name for a NoteProperty member should not be null or an empty string. + NoteProperty üyesinin adı null veya boş dize olmamalıdır. - The TypeName parameter should not be null, empty, or contain only white spaces. + TypeName parametresi null olmamalı, boş olmamalı veya yalnızca boşluk karakterlerinden oluşmamalıdır. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/tr/AliasCommandStrings.tr.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/tr/AliasCommandStrings.tr.resx index abb7afc3de7..d2db41b3efc 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/tr/AliasCommandStrings.tr.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/tr/AliasCommandStrings.tr.resx @@ -118,54 +118,54 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Set Alias + Diğer ad ayarla - Name: {0} Value: {1} + Ad: {0} Değer: {1} - New Alias + Yeni Diğer Ad - Name: {0} Value: {1} + Ad: {0} Değer: {1} - Import Alias + İçeri aktarma Diğer Adı - Name: {0} Value: {1} + Ad: {0} Değer: {1} - Cannot open file {0} to export the alias. {1} + Diğer adı dışarı aktarmak için {0} dosyası açılamıyor. {1} - Alias File + Diğer ad Dosyası - Exported by : {0} + Dışarı aktaran: {0} - Date/Time : {0:F} + Tarih/Saat : {0:F} - Computer : {0} + Bilgisayar: {0} - Cannot import the alias because the specified path '{0}' referred to a '{1}' provider path. Change the value of the Path parameter to a file system path. + Belirtilen yol '{0}' bir '{1}' sağlayıcı yoluna başvurduğu için diğer ad içeri aktarılamıyor. Path parametresinin değerini bir dosya sistemi yoluna değiştirin. - Cannot import alias because path '{0}' contains wildcard characters that resolve to multiple paths. Aliases can be imported from only one file. Change the value of the Path parameter to a path that resolves to a single file. + Yol '{0}' joker karakterler içerdiğinden ve bunlar birden çok yola çözümlendiğinden diğer ad içeri aktarılamıyor. Diğer adlar yalnızca bir dosyadan içeri aktarılabilir. Path parametresinin değerini tek bir dosyaya çözümlenen bir yola değiştirin. - Cannot open file {0} to import the alias. {1} + Diğer adı içeri aktarmak için {0} dosyası açılamıyor. {1} - Cannot import an alias. Line number {1} in the file '{0}' is not a properly-formatted, comma-separated values (CSV) line for aliases. Change the line to contain four values separated by commas. If the value text itself contains a comma, then the value must be contained in quotation marks. + Bir diğer ad içeri aktarılamıyor. “{0}” dosyasındaki {1} numaralı satır, diğer adlar için düzgün biçimlendirilmiş bir virgülle ayrılmış değerler (CSV) satırı değil. Satırı virgülle ayrılmış dört değer içerecek şekilde değiştirin. Değer metninin kendisi bir virgül içeriyorsa, değer tırnak işaretleri içine alınmalıdır. - Cannot import the alias because line number {1} in the file '{0}' contains an option that is not recognized for aliases. Change the file to contain valid options. + “{0}” dosyasındaki {1} numaralı satır, diğer adlar için tanınmayan bir seçenek içerdiğinden diğer ad içeri aktarılamıyor. Dosyayı geçerli seçenekler içerecek şekilde değiştirin. - This command cannot find a matching alias because an alias with the {0} '{1}' does not exist. + Bu komut eşleşen bir diğer ad bulamıyor çünkü “{0}” “{1}” değerine sahip bir diğer ad yok. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/AddMember.zh-Hans.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/AddMember.zh-Hans.resx index e7ce64965ab..1a28771360d 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/AddMember.zh-Hans.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/AddMember.zh-Hans.resx @@ -118,42 +118,42 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - To add a member, only one member type can be specified. The member types specified are: "{0}" + 若要添加成员，只能指定一种成员类型。指定的成员类型为“{0}” - Cannot add a member with type "{0}". Specify a different type for the MemberTypes parameter. + 无法添加类型为“{0}”的成员。请为 MemberTypes 参数指定其他类型。 - The SecondValue parameter is not necessary for a member of type "{0}", and should not be specified. Do not specify the SecondValue parameter when you add members of this type. + 对于类型为“{0}”的成员，SecondValue 参数不是必需项，因此不应指定。添加此类型的成员时，不要指定 SecondValue 参数。 - The Value parameter is required for a member of type "{0}". Specify the Value parameter when adding members of this type. + 类型为“{0}”的成员需要 Value 参数。添加此类型的成员时，请指定 Value 参数。 - Both Value and SecondValue parameters should not be null for a member of type "{0}". Specify a non-null value for one of the two parameters. + 对于类型为“{0}”的成员，Value 和 SecondValue 参数不能同时为 null。请为这两个参数中的一个指定非 null 值。 - Cannot add a member with the name "{0}" because a member with that name already exists. To overwrite the member anyway, add the Force parameter to your command. + 无法添加名称为“{0}”的成员，因为已存在同名成员。若仍要覆盖该成员，请在命令中添加 Force 参数。 - Cannot force the member with name "{0}" and type "{1}" to be added. A member with that name and type already exists, and the existing member is not an instance extension. + 无法强制添加名称为“{0}”、类型为“{1}”的成员。已存在同名同类型的成员，且该现有成员不是实例扩展。 - The member referenced by this alias should not be null or empty. + 此别名引用的成员不应为 null 或空。 - The Value parameter should not be null for a member of type "{0}". Specify a non-null value for the Value parameter when adding members of this type. + 对于类型为“{0}”的成员，Value 参数不应为 null。添加此类型的成员时，请为 Value 参数指定非 null 值。 - The SecondValue parameter should not be null for a member of type "{0}". Specify a non-null value for the SecondValue parameter when adding members of this type. + 对于类型为“{0}”的成员，SecondValue 参数不应为 null。添加此类型的成员时，请为 SecondValue 参数指定非 null 值。 - The parameter NotePropertyName cannot take values that could be converted to the type {0}. To define the name of a member with those values, use Add-Member, and specify the member type. + NotePropertyName 参数不能使用可转换为类型“{0}”的值。若要使用这些值定义成员名称，请使用 Add-Member，并指定成员类型。 - The name for a NoteProperty member should not be null or an empty string. + NoteProperty 成员的名称不应为 null 或空字符串。 - The TypeName parameter should not be null, empty, or contain only white spaces. + TypeName 参数不能为 null、不能为空，也不能仅包含空格。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/AliasCommandStrings.zh-Hans.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/AliasCommandStrings.zh-Hans.resx index abb7afc3de7..62a5ac1e2bf 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/AliasCommandStrings.zh-Hans.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/AliasCommandStrings.zh-Hans.resx @@ -118,54 +118,54 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Set Alias + 设置别名 - Name: {0} Value: {1} + 名称: {0} 值: {1} - New Alias + 新建别名 - Name: {0} Value: {1} + 名称: {0} 值: {1} - Import Alias + 导入别名 - Name: {0} Value: {1} + 名称: {0} 值: {1} - Cannot open file {0} to export the alias. {1} + 无法打开文件 {0} 以导出别名。{1} - Alias File + 别名文件 - Exported by : {0} + 导出者: {0} - Date/Time : {0:F} + 日期/时间 : {0:F} - Computer : {0} + 计算机: {0} - Cannot import the alias because the specified path '{0}' referred to a '{1}' provider path. Change the value of the Path parameter to a file system path. + 无法导入别名，因为指定的路径 "{0}" 引用了 "{1}" 提供程序路径。请将 Path 参数更改为文件系统路径。 - Cannot import alias because path '{0}' contains wildcard characters that resolve to multiple paths. Aliases can be imported from only one file. Change the value of the Path parameter to a path that resolves to a single file. + 无法导入别名，因为路径 "{0}" 包含会解析为多个路径的通配符。别名只能从一个文件导入。请将 Path 参数的值更改为可解析为单个文件的路径。 - Cannot open file {0} to import the alias. {1} + 无法打开文件 {0} 以导出别名。{1} - Cannot import an alias. Line number {1} in the file '{0}' is not a properly-formatted, comma-separated values (CSV) line for aliases. Change the line to contain four values separated by commas. If the value text itself contains a comma, then the value must be contained in quotation marks. + 无法导入别名。文件 "{0}" 中的第 {1} 行不是格式正确的逗号分隔值(CSV)别名行。请将该行更改为包含四个由逗号分隔的值。如果值文本本身包含逗号，则该值必须用引号括起来。 - Cannot import the alias because line number {1} in the file '{0}' contains an option that is not recognized for aliases. Change the file to contain valid options. + 无法导入别名，因为文件 "{0}" 中的第 {1} 行包含别名无法识别的选项。请更改文件，使其包含有效选项。 - This command cannot find a matching alias because an alias with the {0} '{1}' does not exist. + 此命令找不到匹配的别名，因为名为 {0} "{1}" 的别名不存在。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/AliasCommandStrings.zh-Hant.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/AliasCommandStrings.zh-Hant.resx index abb7afc3de7..9de4e180bae 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/AliasCommandStrings.zh-Hant.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/AliasCommandStrings.zh-Hant.resx @@ -118,54 +118,54 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Set Alias + 設定別名 - Name: {0} Value: {1} + 名稱: {0}，值: {1} - New Alias + 新增別名 - Name: {0} Value: {1} + 名稱: {0}，值: {1} - Import Alias + 匯入別名 - Name: {0} Value: {1} + 名稱: {0}，值: {1} - Cannot open file {0} to export the alias. {1} + 無法開啟檔案 {0} 以匯出別名。{1} - Alias File + 別名檔案 - Exported by : {0} + 匯出者 : {0} - Date/Time : {0:F} + 日期/時間 : {0:F} - Computer : {0} + 電腦 : {0} - Cannot import the alias because the specified path '{0}' referred to a '{1}' provider path. Change the value of the Path parameter to a file system path. + 無法匯入別名，因為指定的路徑 '{0}' 參照 '{1}' 提供者路徑。請將 Path 參數的值變更為檔案系統路徑。 - Cannot import alias because path '{0}' contains wildcard characters that resolve to multiple paths. Aliases can be imported from only one file. Change the value of the Path parameter to a path that resolves to a single file. + 無法匯入別名，因為路徑 '{0}' 包含可解析為多個路徑的萬用字元。別名只能從一個檔案匯入。請將 Path 參數的值變更為只會解析出單一檔案的路徑。 - Cannot open file {0} to import the alias. {1} + 無法開啟檔案 {0} 以匯入別名。{1} - Cannot import an alias. Line number {1} in the file '{0}' is not a properly-formatted, comma-separated values (CSV) line for aliases. Change the line to contain four values separated by commas. If the value text itself contains a comma, then the value must be contained in quotation marks. + 無法匯入別名。檔案 '{0}' 中的行號 {1} 不是格式正確的逗號分隔值 (CSV) 別名行。請將該行變更為包含四個以逗號分隔的值。若值文字本身包含逗號，則該值必須以引號括住。 - Cannot import the alias because line number {1} in the file '{0}' contains an option that is not recognized for aliases. Change the file to contain valid options. + 無法匯入別名，因為檔案 '{0}' 中的行號 {1} 包含別名無法辨識的選項。請修改該檔案，使其包含有效的選項。 - This command cannot find a matching alias because an alias with the {0} '{1}' does not exist. + 此命令找不到相符的別名，因為不存在具有 {0} '{1}' 的別名。 \ No newline at end of file From e8596e5e29e0d011fbda8b04104749ff1a6e6237 Mon Sep 17 00:00:00 2001 From: olprod Date: Fri, 14 Aug 2026 12:26:15 -0700 Subject: [PATCH 6/7] Localized file check-in by OneLocBuild Task: Build definition ID 13420: Build ID 2677113 --- .../resources/de/Debugger.de.resx | 38 ++++---- .../resources/de/GetMember.de.resx | 2 +- .../resources/de/MatchStringStrings.de.resx | 10 +-- .../resources/de/SelectObjectStrings.de.resx | 10 +-- .../resources/de/WebCmdletStrings.de.resx | 86 +++++++++---------- .../resources/es/Debugger.es.resx | 38 ++++---- .../resources/es/GetMember.es.resx | 2 +- .../resources/es/GetUptimeStrings.es.resx | 2 +- .../resources/es/MatchStringStrings.es.resx | 10 +-- .../resources/es/SelectObjectStrings.es.resx | 10 +-- .../fr/FormatAndOut_out_gridview.fr.resx | 12 +-- .../resources/fr/GetUptimeStrings.fr.resx | 2 +- .../resources/fr/SelectObjectStrings.fr.resx | 10 +-- .../resources/fr/WebCmdletStrings.fr.resx | 86 +++++++++---------- .../resources/it/ConvertHTMLStrings.it.resx | 2 +- .../resources/it/Debugger.it.resx | 38 ++++---- .../resources/it/GetMember.it.resx | 2 +- .../resources/it/GetUptimeStrings.it.resx | 2 +- .../resources/it/MatchStringStrings.it.resx | 10 +-- .../resources/ja/ConvertHTMLStrings.ja.resx | 2 +- .../resources/ja/Debugger.ja.resx | 38 ++++---- .../resources/ja/MatchStringStrings.ja.resx | 10 +-- .../resources/ja/WebCmdletStrings.ja.resx | 86 +++++++++---------- .../resources/pl/ConvertHTMLStrings.pl.resx | 2 +- .../resources/pl/Debugger.pl.resx | 38 ++++---- .../resources/pl/GetMember.pl.resx | 2 +- .../resources/pl/GetUptimeStrings.pl.resx | 2 +- .../resources/pl/NewObjectStrings.pl.resx | 28 +++--- .../resources/pl/WebCmdletStrings.pl.resx | 86 +++++++++---------- .../resources/ru/Debugger.ru.resx | 38 ++++---- .../resources/ru/GetMember.ru.resx | 2 +- .../resources/ru/GetUptimeStrings.ru.resx | 2 +- .../resources/tr/ConvertHTMLStrings.tr.resx | 2 +- .../resources/tr/Debugger.tr.resx | 38 ++++---- .../tr/FormatAndOut_out_gridview.tr.resx | 16 ++-- .../resources/tr/MatchStringStrings.tr.resx | 10 +-- .../resources/tr/SelectObjectStrings.tr.resx | 10 +-- .../zh-Hans/ConvertHTMLStrings.zh-Hans.resx | 2 +- .../resources/zh-Hans/Debugger.zh-Hans.resx | 38 ++++---- .../FormatAndOut_out_gridview.zh-Hans.resx | 16 ++-- .../resources/zh-Hans/GetMember.zh-Hans.resx | 2 +- .../zh-Hans/GetUptimeStrings.zh-Hans.resx | 2 +- .../zh-Hans/MatchStringStrings.zh-Hans.resx | 10 +-- .../zh-Hans/SelectObjectStrings.zh-Hans.resx | 10 +-- .../zh-Hant/ConvertHTMLStrings.zh-Hant.resx | 2 +- .../resources/zh-Hant/Debugger.zh-Hant.resx | 38 ++++---- .../resources/zh-Hant/GetMember.zh-Hant.resx | 2 +- .../zh-Hant/GetUptimeStrings.zh-Hant.resx | 2 +- .../zh-Hant/MatchStringStrings.zh-Hant.resx | 10 +-- .../zh-Hant/NewObjectStrings.zh-Hant.resx | 28 +++--- 50 files changed, 473 insertions(+), 473 deletions(-) diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/de/Debugger.de.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/de/Debugger.de.resx index f9593efbe5a..94d670675af 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/de/Debugger.de.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/de/Debugger.de.resx @@ -118,63 +118,63 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Line cannot be less than 1. + Die Zeile darf nicht kleiner als 1 sein - There is no breakpoint with ID '{0}'. + Es ist kein Haltepunkt mit der ID „{0}“ vorhanden. Die Datei '{0}' ist nicht vorhanden. - Cannot set breakpoint on file '{0}'; only *.ps1 and *.psm1 files are valid. + Für die Datei „{0}“ kann kein Haltepunkt gesetzt werden; nur *.ps1- und *.psm1-Dateien sind gültig. - Debugging is not supported on remote sessions. + Das Debuggen wird in Remotesitzungen nicht unterstützt. - Cannot set breakpoint. The language mode for this session is incompatible with the system-wide language mode. + Der Haltepunkt kann nicht festgelegt werden. Der Sprachmodus für diese Sitzung ist nicht mit dem systemweiten Sprachmodus kompatibel. - Breakpoints cannot be set in the remote session because remote debugging is not supported by the current host. + In der Remotesitzung können keine Haltepunkte gesetzt werden, da Remotedebuggen vom aktuellen Host nicht unterstützt wird. - You cannot debug the default host Runspace using this cmdlet. To debug the default Runspace use the normal debugging commands from the host. + Der standardmäßige Host-Runspace kann mit diesem Cmdlet nicht debuggt werden. Um den standardmäßigen Runspace zu debuggen, verwenden Sie die normalen Debugbefehle des Hosts. - Cannot debug Runspace. The host has no debugger. Try debugging the Runspace inside the PowerShell console or with Visual Studio Code, both of which have built-in debuggers. + Runspace kann nicht debuggt werden. Der Host hat keinen Debugger. Versuchen Sie, den Runspace in der PowerShell-Konsole oder in Visual Studio Code zu debuggen. Beide verfügen über integrierte Debugger. - Cannot debug Runspace. There is no host or host UI. The debugger requires a host and host UI for debugging. + Runspace kann nicht debuggt werden. Es gibt keinen Host und keine Host-Benutzeroberfläche. Der Debugger benötigt einen Host und eine Host-Benutzeroberfläche zum Debuggen. - More than one Runspace was found. Only one Runspace can be debugged at a time. + Es wurden mehr als ein Runspace gefunden. Es kann immer nur ein Runspace gleichzeitig debuggt werden. - To end the debugging session type the 'Detach' command at the debugger prompt, or type 'Ctrl+C' otherwise. + Um die Debugsitzung zu beenden, geben Sie den Befehl „Detach“ an der Debugger-Eingabeaufforderung ein, oder drücken Sie sonst „STRG+C“. - Command or script completed. + Befehl oder Skript abgeschlossen. - Debugging Runspace: {0} + Debuggen von Runspace: {0} - Cannot set debug options on Runspace {0} because it is not in the Opened state. + Die Debugoptionen für Runspace „{0}“ können nicht festgelegt werden, da er sich nicht im Zustand „Opened“ (geöffnet) befindet. - Failed to persist debug options for Process {0}. + Fehler beim Beibehalten der Debugoptionen für Prozess „{0}“. - No debugger was found for Runspace {0}. + Es wurde kein Debugger für Runspace „{0}“ gefunden. - No Runspace was found. + Es wurde kein Runspace gefunden. - Wait-Debugger called on line {0} in {1}. + Wait-Debugger in Zeile {0} in „{1}“ aufgerufen. - A breakpoint associated with another runspace cannot be updated because there is no runspace with instance ID '{0}'. + Ein Haltepunkt, der einem anderen Runspace zugeordnet ist, kann nicht aktualisiert werden, da kein Runspace mit der Instanz-ID „{0}“ vorhanden ist. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/de/GetMember.de.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/de/GetMember.de.resx index 5ad7b93b9c4..88d99675ccc 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/de/GetMember.de.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/de/GetMember.de.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - You must specify an object for the Get-Member cmdlet. + Sie müssen ein Objekt für das Cmdlet „Get-Member“ angeben. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/de/MatchStringStrings.de.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/de/MatchStringStrings.de.resx index bc7da6005b7..510399eddb0 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/de/MatchStringStrings.de.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/de/MatchStringStrings.de.resx @@ -118,18 +118,18 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot open the file because the current provider ({0}) cannot open files. + Die Datei kann nicht geöffnet werden, da der aktuelle Anbieter ({0}) keine Dateien öffnen kann. - The file {0} cannot be read: {1} + Die Datei „{0}“ kann nicht gelesen werden: {1} - The option "Context" is not valid when searching results that are piped from Select-String output. + Die Option „Context“ ist beim Suchen nach Ergebnissen, die aus der Select-String-Ausgabe weitergeleitet werden, nicht zulässig. - The string {0} is not a valid regular expression: {1} + Die Zeichenfolge „{0}“ ist kein gültiger regulärer Ausdruck: {1} - You must specify -Culture parameter only with -SimpleMatch parameter. + Der Parameter „-Culture“ darf nur zusammen mit dem Parameter „-SimpleMatch“ angegeben werden. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/de/SelectObjectStrings.de.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/de/SelectObjectStrings.de.resx index bdd62150f75..6edcf6319f0 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/de/SelectObjectStrings.de.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/de/SelectObjectStrings.de.resx @@ -118,18 +118,18 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot rename multiple results. + Mehrere Ergebnisse können nicht umbenannt werden. - Property "{0}" cannot be found. + Die Eigenschaft „{0}“ kann nicht gefunden werden. - Multiple properties cannot be expanded. + Mehrere Eigenschaften können nicht erweitert werden. - The property cannot be processed because the property "{0}" already exists. + Die Eigenschaft kann nicht verarbeitet werden, da die Eigenschaft „{0}“ bereits vorhanden ist. - A property is an empty script block and does not provide a name. + Eine Eigenschaft ist ein leerer Skriptblock und bietet keinen Namen. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/de/WebCmdletStrings.de.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/de/WebCmdletStrings.de.resx index 2e7d6752493..1f95d6f72b6 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/de/WebCmdletStrings.de.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/de/WebCmdletStrings.de.resx @@ -121,132 +121,132 @@ Der Zugriff auf den Pfad "{0}" wird verweigert. - The cmdlet cannot protect plain text secrets sent over unencrypted connections. To suppress this warning and send plain text secrets over unencrypted networks, reissue the command specifying the AllowUnencryptedAuthentication parameter. + Das Cmdlet kann Klartextgeheimnisse, die über unverschlüsselte Verbindungen gesendet werden, nicht schützen. Um diese Warnung zu unterdrücken und Klartextgeheimnisse über unverschlüsselte Netzwerke zu senden, führen Sie den Befehl unter Angabe des AllowUnencryptedAuthentication-Parameters erneut aus. - The cmdlet cannot run because the following conflicting parameters are specified: Authentication and UseDefaultCredentials. Authentication does not support Default Credentials. Specify either Authentication or UseDefaultCredentials, then retry. + Das Cmdlet kann nicht ausgeführt werden, da die folgenden konfliktverursachenden Parameter angegeben sind: Authentication und UseDefaultCredentials. Authentication unterstützt keine Standardanmeldeinformationen. Geben Sie entweder „Authentication“ oder „UseDefaultCredentials“ an, und wiederholen Sie den Vorgang. - The cmdlet cannot run because the following parameter is not specified: Credential. The supplied Authentication type requires a Credential. Specify Credential, then retry. + Das Cmdlet kann nicht ausgeführt werden, da der folgende Parameter nicht angegeben ist: Credential. Der angegebene Authentifizierungstyp erfordert „Credential“. Geben Sie „Credential“ an, und wiederholen Sie den Vorgang. - The cmdlet cannot run because the following parameter is not specified: Token. The supplied Authentication type requires a Token. Specify Token, then retry. + Das Cmdlet kann nicht ausgeführt werden, da der folgende Parameter nicht angegeben ist: Token. Der angegebene Authentifizierungstyp erfordert ein Token. Geben Sie Token an, und wiederholen Sie den Vorgang. - The cmdlet cannot run because the following conflicting parameters are specified: Credential and Token. Specify either Credential or Token, then retry. + Das Cmdlet kann nicht ausgeführt werden, da die folgenden konfliktverursachenden Parameter angegeben sind: Credential und Token. Geben Sie entweder „Credential“ oder „Token“ an, und wiederholen Sie den Vorgang. - The cmdlet cannot run because the following conflicting parameters are specified: Body and InFile. Specify either Body or Infile, then retry. + Das Cmdlet kann nicht ausgeführt werden, da die folgenden konfliktverursachenden Parameter angegeben sind: Body und InFile. Geben Sie entweder „Body“ oder „InFile“ an, und wiederholen Sie den Vorgang. - The cmdlet cannot run because the following conflicting parameters are specified: Body and Form. Specify either Body or Form, then retry. + Das Cmdlet kann nicht ausgeführt werden, da die folgenden konfliktverursachenden Parameter angegeben sind: Body und Form. Geben Sie entweder „Body“ oder „Form“ an, und wiederholen Sie den Vorgang. - The cmdlet cannot run because the following conflicting parameters are specified: InFile and Form. Specify either InFile or Form, then retry. + Das Cmdlet kann nicht ausgeführt werden, da die folgenden konfliktverursachenden Parameter angegeben sind: InFile und Form. Geben Sie entweder „InFile“ oder „Form“ an, und wiederholen Sie den Vorgang. - The cmdlet cannot run because the -ContentType parameter is not a valid Content-Type header. Specify a valid Content-Type for -ContentType, then retry. To suppress header validation, supply the -SkipHeaderValidation parameter. + Das Cmdlet kann nicht ausgeführt werden, da der Parameter „-ContentType“ kein gültiger Content-Type-Header ist. Geben Sie einen gültigen Content-Type für „-ContentType“ an, und wiederholen Sie den Vorgang. Um die Headerüberprüfung zu unterdrücken, geben Sie den Parameter „-SkipHeaderValidation“ an. - The cmdlet cannot run because the following conflicting parameters are specified: Credential and UseDefaultCredentials. Specify either Credential or UseDefaultCredentials, then retry. + Das Cmdlet kann nicht ausgeführt werden, da die folgenden konfliktverursachenden Parameter angegeben sind: Credential und UseDefaultCredentials. Geben Sie entweder „Credential“ oder „UseDefaultCredentials“ an, und wiederholen Sie den Vorgang. - Path '{0}' resolves to a directory. Specify a path including a file name, and then retry the command. + Der Pfad „{0}“ führt zu einem Verzeichnis. Geben Sie einen Pfad einschließlich eines Dateinamens an, und wiederholen Sie den Befehl. - The provided JSON includes a property whose name is an empty string, this is only supported using the -AsHashTable switch. + Die angegebene JSON enthält eine Eigenschaft, deren Name eine leere Zeichenfolge ist. Dies wird nur mit dem Schalter „-AsHashTable“ unterstützt. - Cannot convert the JSON string because a dictionary that was converted from the string contains the duplicated key '{0}'. + Die JSON-Zeichenfolge kann nicht konvertiert werden, da ein aus der Zeichenfolge konvertiertes Wörterbuch den doppelten Schlüssel „{0}“ enthält. - The response content cannot be parsed because the Internet Explorer engine is not available, or Internet Explorer's first-launch configuration is not complete. Specify the UseBasicParsing parameter and try again. + Der Antwortinhalt kann nicht analysiert werden, da die Internet Explorer-Engine nicht verfügbar ist oder die Erstkonfiguration von Internet Explorer nicht abgeschlossen ist. Geben Sie den UseBasicParsing-Parameter an, und versuchen Sie es erneut. - Cannot follow an insecure redirection by default. Reissue the command specifying the -AllowInsecureRedirect switch. + Standardmäßig kann einer unsicheren Umleitung nicht gefolgt werden. Wiederholen Sie den Befehl unter Angabe des Schalters „-AllowInsecureRedirect“. - Cannot convert the JSON string because it contains keys with different casing. Please use the -AsHashTable switch instead. The key that was attempted to be added to the existing key '{0}' was '{1}'. + Die JSON-Zeichenfolge kann nicht konvertiert werden, da sie Schlüssel mit unterschiedlicher Groß-/Kleinschreibung enthält. Verwenden Sie stattdessen den Schalter „-AsHashTable“. Der Schlüssel, der dem vorhandenen Schlüssel „{0}“ hinzugefügt werden sollte, war „{1}“. - The maximum redirection count has been exceeded. To increase the number of redirections allowed, supply a higher value to the -MaximumRedirection parameter. + Die maximale Anzahl von Umleitungen wurde überschritten. Um die Anzahl der zulässigen Umleitungen zu erhöhen, geben Sie einen höheren Wert für den Parameter „-MaximumRedirection“ an. - Path '{0}' can be resolved to multiple paths. + Der Pfad „{0}“ kann mehreren Pfaden zugeordnet werden. - The type '{0}' is not supported for serialization or deserialization of a dictionary. Keys must be strings. + Der Typ „{0}“ wird für die Serialisierung oder Deserialisierung eines Wörterbuchs nicht unterstützt. Schlüssel müssen Zeichenfolgen sein. - Path '{0}' cannot be resolved to a file. + Der Pfad „{0}“ kann keiner Datei zugeordnet werden. - Path '{0}' is not a file system path. Please specify the path to a file in the file system. + Der Pfad „{0}“ ist kein Dateisystempfad. Geben Sie den Pfad zu einer Datei im Dateisystem an. - The cmdlet cannot run because the following parameter is missing: OutFile. Provide a valid OutFile parameter value when using the {0} parameter, then retry. + Das Cmdlet kann nicht ausgeführt werden, da der folgende Parameter fehlt: OutFile. Geben Sie bei Verwendung des {0}-Parameters einen gültigen OutFile-Parameterwert an, und wiederholen Sie dann den Vorgang. - The file will not be re-downloaded because the remote file is the same size as the OutFile: {0} + Die Datei wird nicht erneut heruntergeladen, da die Remotedatei dieselbe Größe wie die Ausgabedatei hat: {0} - The cmdlet cannot run because the following conflicting parameters are specified: ProxyCredential and ProxyUseDefaultCredentials. Specify either ProxyCredential or ProxyUseDefaultCredentials, then retry. + Das Cmdlet kann nicht ausgeführt werden, da die folgenden konfliktverursachenden Parameter angegeben sind: ProxyCredential und ProxyUseDefaultCredentials. Geben Sie entweder „ProxyCredential“ oder „ProxyUseDefaultCredentials“ an, und wiederholen Sie den Vorgang. - The cmdlet cannot run because the following parameter is missing: Proxy. Provide a valid proxy URI for the Proxy parameter when using the ProxyCredential or ProxyUseDefaultCredentials parameters, then retry. + Das Cmdlet kann nicht ausgeführt werden, da der folgende Parameter fehlt: Proxy. Geben Sie bei Verwendung der Parameter „ProxyCredential“ oder „ProxyUseDefaultCredentials“ einen gültigen Proxy-URI für den Proxy-Parameter an, und wiederholen Sie dann den Vorgang. - Reading web response stream completed. Bytes downloaded: {0} + Der Lesevorgang des Webantwortdatenstroms wurde abgeschlossen. Heruntergeladene Bytes: {0} - Reading web response stream + Webantwortstream wird gelesen - Downloaded: {0} of {1} + Heruntergeladen: {0} von {1} - The Resume switch can only be used if OutFile targets a file but it resolves to a directory: {0}. + Der Resume-Schalter kann nur verwendet werden, wenn OutFile auf eine Datei verweist, aber in ein Verzeichnis aufgelöst wird: {0}. - The cmdlet cannot run because the following conflicting parameters are specified: Session and SessionVariable. Specify either Session or SessionVariable, then retry. + Das Cmdlet kann nicht ausgeführt werden, da die folgenden konfliktverursachenden Parameter angegeben sind: Session und SessionVariable Geben Sie entweder „Session“ oder „SessionVariable“ an, und wiederholen Sie den Vorgang. - Unable to retrieve certificates because the thumbprint is not valid. Verify the thumbprint and retry. + Zertifikate können nicht abgerufen werden, da der Fingerabdruck ungültig ist. Überprüfen Sie den Fingerabdruck, und wiederholen Sie den Vorgang. - Web request completed. (Number of bytes processed: {0}) + Die Webanforderung wurde abgeschlossen. (Anzahl der verarbeiteten Bytes: {0}) - Web request cancelled. (Number of bytes processed: {0}) + Web-Anforderung abgebrochen. (Anzahl der verarbeiteten Bytes: {0}) - Web request status + Web-Anforderungsstatus - Downloaded: {0} of {1} + Heruntergeladen: {0} von {1} - Conversion from JSON failed with error: {0} + Die Konvertierung von JSON ist fehlgeschlagen. Fehler: {0} - Response status code does not indicate success: {0} ({1}). + Der Antwortstatuscode weist nicht auf einen erfolgreichen Vorgang hin: {0} ({1}). - Following rel link {0} + Dem folgenden rel-Link „{0}“ - The remote server indicated it could not resume downloading. The local file will be overwritten. + Der Remoteserver hat angegeben, dass der Download nicht fortgesetzt werden kann. Die lokale Datei wird überschrieben. - Received HTTP/{0} response of content type {1} of unknown size + HTTP/{0}-Antwort des Inhaltstyps „{1}“ mit unbekannter Größe empfangen - Retrying after interval of {0} seconds. Status code for previous attempt: {1} + Wiederholen nach einem Intervall von {0} Sekunden. Statuscode für den vorherigen Versuch: {1} - Resulting JSON is truncated as serialization has exceeded the set depth of {0}. + Das resultierende JSON wird abgeschnitten, da die Serialisierung die festgelegte Tiefe von {0} überschritten hat. - The WebSession properties were changed between requests forcing all HTTP connections in the session to be recreated. + Die WebSession-Eigenschaften wurden zwischen den Anforderungen geändert, sodass alle HTTP-Verbindungen in der Sitzung neu erstellt werden mussten. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/es/Debugger.es.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/es/Debugger.es.resx index 4aad039409e..1468f2599ae 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/es/Debugger.es.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/es/Debugger.es.resx @@ -118,63 +118,63 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Line cannot be less than 1. + La línea no puede ser menor que 1. - There is no breakpoint with ID '{0}'. + No hay ningún punto de interrupción con el identificador "{0}". El archivo '{0}' no existe. - Cannot set breakpoint on file '{0}'; only *.ps1 and *.psm1 files are valid. + No se puede establecer el punto de interrupción en el archivo "{0}"; solo los archivos *.ps1 y *.psm1 son válidos. - Debugging is not supported on remote sessions. + No se admite la depuración en sesiones remotas. - Cannot set breakpoint. The language mode for this session is incompatible with the system-wide language mode. + No se puede establecer el punto de interrupción. El modo de idioma para esta sesión no es compatible con el modo de lenguaje de todo el sistema. - Breakpoints cannot be set in the remote session because remote debugging is not supported by the current host. + No se pueden establecer puntos de interrupción en la sesión remota porque el host actual no admite la depuración remota. - You cannot debug the default host Runspace using this cmdlet. To debug the default Runspace use the normal debugging commands from the host. + No se puede depurar el espacio de ejecución del host predeterminado mediante este cmdlet. Para depurar el espacio de ejecución predeterminado, use los comandos de depuración normales del host. - Cannot debug Runspace. The host has no debugger. Try debugging the Runspace inside the PowerShell console or with Visual Studio Code, both of which have built-in debuggers. + No se puede depurar el espacio de ejecución. El host no tiene depurador. Pruebe a depurar el espacio de ejecución dentro de la consola de PowerShell o con Visual Studio Code, que tienen depuradores integrados. - Cannot debug Runspace. There is no host or host UI. The debugger requires a host and host UI for debugging. + No se puede depurar el espacio de ejecución. No hay ninguna interfaz de usuario de host o host. El depurador requiere un host y una interfaz de usuario de host para la depuración. - More than one Runspace was found. Only one Runspace can be debugged at a time. + Se encontró más de un espacio de ejecución. Solo se puede depurar un espacio de ejecución a la vez. - To end the debugging session type the 'Detach' command at the debugger prompt, or type 'Ctrl+C' otherwise. + Para finalizar la sesión de depuración, escriba el comando "Desasociar" en el símbolo del sistema del depurador o escriba "Ctrl+C" en caso contrario. - Command or script completed. + Comando o script completado. - Debugging Runspace: {0} + Depuración del espacio de ejecución: {0} - Cannot set debug options on Runspace {0} because it is not in the Opened state. + No se pueden establecer opciones de depuración en el espacio {0} de ejecución porque no está en el estado Abierto. - Failed to persist debug options for Process {0}. + No se pudieron conservar las opciones de depuración del proceso {0}. - No debugger was found for Runspace {0}. + No se encontró ningún depurador para el espacio de ejecución {0}. - No Runspace was found. + No se encontró ningún espacio de ejecución. - Wait-Debugger called on line {0} in {1}. + Wait-Debugger se llamó en la línea {0} en {1}. - A breakpoint associated with another runspace cannot be updated because there is no runspace with instance ID '{0}'. + No se puede actualizar un punto de interrupción asociado a otro espacio de ejecución porque no hay ningún espacio de ejecución con el identificador de instancia '{0}'. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/es/GetMember.es.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/es/GetMember.es.resx index 5ad7b93b9c4..b37a986a343 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/es/GetMember.es.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/es/GetMember.es.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - You must specify an object for the Get-Member cmdlet. + Debe especificar un objeto para el cmdlet Get-Member. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/es/GetUptimeStrings.es.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/es/GetUptimeStrings.es.resx index a9d0be9630e..458a30b46aa 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/es/GetUptimeStrings.es.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/es/GetUptimeStrings.es.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - "The platform is not supported (System.Diagnostics.Stopwatch.IsHighResolution is false)." + "No se admite la plataforma (System.Diagnostics.Stopwatch.IsHighResolution es false)." \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/es/MatchStringStrings.es.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/es/MatchStringStrings.es.resx index bc7da6005b7..0bb1f72fbfc 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/es/MatchStringStrings.es.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/es/MatchStringStrings.es.resx @@ -118,18 +118,18 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot open the file because the current provider ({0}) cannot open files. + No se puede abrir el archivo porque el proveedor actual ({0}) no puede abrir archivos. - The file {0} cannot be read: {1} + No se puede leer el {0} de archivos: {1} - The option "Context" is not valid when searching results that are piped from Select-String output. + La opción "Context" no es válida al buscar resultados canalizados desde la salida de Select-String. - The string {0} is not a valid regular expression: {1} + La cadena {0} no es una expresión regular válida: {1} - You must specify -Culture parameter only with -SimpleMatch parameter. + Debe especificar el parámetro -Culture solo junto con el parámetro -SimpleMatch. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/es/SelectObjectStrings.es.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/es/SelectObjectStrings.es.resx index bdd62150f75..e111013309a 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/es/SelectObjectStrings.es.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/es/SelectObjectStrings.es.resx @@ -118,18 +118,18 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot rename multiple results. + No se puede cambiar el nombre de varios resultados. - Property "{0}" cannot be found. + No se encuentra la propiedad "{0}". - Multiple properties cannot be expanded. + No se pueden expandir varias propiedades. - The property cannot be processed because the property "{0}" already exists. + No se puede procesar la propiedad porque la propiedad "{0}" ya existe. - A property is an empty script block and does not provide a name. + Una propiedad es un bloque de script vacío y no proporciona un nombre. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/fr/FormatAndOut_out_gridview.fr.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/fr/FormatAndOut_out_gridview.fr.resx index c2a09dd7168..6c73f04fdc7 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/fr/FormatAndOut_out_gridview.fr.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/fr/FormatAndOut_out_gridview.fr.resx @@ -118,10 +118,10 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The data format is not supported by Out-GridView. + Le format de données n’est pas pris en charge par Out-GridView. - Microsoft .NET Framework 4.5 was installed while one or more PowerShell sessions were running. To use the {0} cmdlet, close all PowerShell windows, and then open a new PowerShell window. + Microsoft .NET Framework 4.5 a été installé pendant qu’une ou plusieurs sessions PowerShell étaient en cours d’exécution. Pour utiliser l’applet de commande {0} , fermez toutes les fenêtres PowerShell, puis ouvrez une nouvelle fenêtre PowerShell. Type @@ -133,16 +133,16 @@ Index - A command named '{0}' was not found. + Une commande nommée «{0}» est introuvable. - More than one command named '{0}' was found. Start '{1}' with no parameters, and then type '{0}' to filter the results. + Plusieurs commandes nommées «{0}» ont été trouvées. Démarrez «{1}» sans paramètres, puis tapez «{0}» pour filtrer les résultats. - Cannot write to console input buffer. + Impossible d’écrire dans la mémoire tampon d’entrée de la console. - {0} should be smaller than {1}. + {0} doit être inférieur à {1}. {0} is the property "Height" {1} is the maximum allowed value for the height property. diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/fr/GetUptimeStrings.fr.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/fr/GetUptimeStrings.fr.resx index a9d0be9630e..e657fef4ea4 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/fr/GetUptimeStrings.fr.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/fr/GetUptimeStrings.fr.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - "The platform is not supported (System.Diagnostics.Stopwatch.IsHighResolution is false)." + « La plateforme n’est pas prise en charge (System.Diagnostics.Stopwatch.IsHighResolution a la valeur false). » \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/fr/SelectObjectStrings.fr.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/fr/SelectObjectStrings.fr.resx index bdd62150f75..84b2a398494 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/fr/SelectObjectStrings.fr.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/fr/SelectObjectStrings.fr.resx @@ -118,18 +118,18 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot rename multiple results. + Impossible de renommer plusieurs résultats. - Property "{0}" cannot be found. + La propriété « {0} » est introuvable. - Multiple properties cannot be expanded. + Impossible de développer plusieurs propriétés. - The property cannot be processed because the property "{0}" already exists. + La propriété ne peut pas être traitée, car la propriété « {0} » existe déjà. - A property is an empty script block and does not provide a name. + Une propriété est un bloc de script vide et ne contient pas de nom. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/fr/WebCmdletStrings.fr.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/fr/WebCmdletStrings.fr.resx index 004617b35fa..c94b0d54a1e 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/fr/WebCmdletStrings.fr.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/fr/WebCmdletStrings.fr.resx @@ -121,132 +121,132 @@ L'accès au chemin '{0}' est refusé. - The cmdlet cannot protect plain text secrets sent over unencrypted connections. To suppress this warning and send plain text secrets over unencrypted networks, reissue the command specifying the AllowUnencryptedAuthentication parameter. + L’applet de commande ne peut pas protéger les secrets en texte brut envoyés sur des connexions non chiffrées. Pour supprimer cet avertissement et envoyer des secrets en texte brut sur des réseaux non chiffrés, réexécutez la commande spécifiant le paramètre AllowUnencryptedAuthentication. - The cmdlet cannot run because the following conflicting parameters are specified: Authentication and UseDefaultCredentials. Authentication does not support Default Credentials. Specify either Authentication or UseDefaultCredentials, then retry. + L’applet de commande ne peut pas s’exécuter, car les paramètres en conflit suivants sont spécifiés : Authentication et UseDefaultCredentials. L’authentification ne prend pas en charge les informations d’identification par défaut. Spécifiez l’authentification ou UseDefaultCredentials, puis réessayez. - The cmdlet cannot run because the following parameter is not specified: Credential. The supplied Authentication type requires a Credential. Specify Credential, then retry. + L’applet de commande ne peut pas s’exécuter, car le paramètre suivant n’est pas spécifié : Credential. Le type d’authentification fourni nécessite des informations d’identification. Spécifiez les informations d’identification, puis réessayez. - The cmdlet cannot run because the following parameter is not specified: Token. The supplied Authentication type requires a Token. Specify Token, then retry. + L'applet de commande ne peut pas s'exécuter car le paramètre suivant n'est pas spécifié : Token. Le type d’authentification fourni nécessite un jeton. Spécifiez jeton, puis réessayez. - The cmdlet cannot run because the following conflicting parameters are specified: Credential and Token. Specify either Credential or Token, then retry. + L’applet de commande ne peut pas s’exécuter, car les paramètres en conflit suivants sont spécifiés : Informations d’identification et jeton. Spécifiez les informations d’identification ou le jeton, puis réessayez. - The cmdlet cannot run because the following conflicting parameters are specified: Body and InFile. Specify either Body or Infile, then retry. + L’applet de commande ne peut pas s’exécuter, car les paramètres en conflit suivants sont spécifiés : Body et InFile. Spécifiez soit le corps, soit le fichier d'entrée, puis réessayez. - The cmdlet cannot run because the following conflicting parameters are specified: Body and Form. Specify either Body or Form, then retry. + L’applet de commande ne peut pas s’exécuter, car les paramètres en conflit suivants sont spécifiés : Body et Form. Spécifiez corps ou formulaire, puis réessayez. - The cmdlet cannot run because the following conflicting parameters are specified: InFile and Form. Specify either InFile or Form, then retry. + L’applet de commande ne peut pas s’exécuter, car les paramètres en conflit suivants sont spécifiés : InFile et Form. Spécifiez InFile ou Form, puis réessayez. - The cmdlet cannot run because the -ContentType parameter is not a valid Content-Type header. Specify a valid Content-Type for -ContentType, then retry. To suppress header validation, supply the -SkipHeaderValidation parameter. + L’applet de commande ne peut pas s’exécuter, car le paramètre -ContentType n’est pas un en-tête Content-Type valide. Spécifiez un type de contenu valide pour -ContentType, puis réessayez. Pour supprimer la validation d’en-tête, fournissez le paramètre -SkipHeaderValidation. - The cmdlet cannot run because the following conflicting parameters are specified: Credential and UseDefaultCredentials. Specify either Credential or UseDefaultCredentials, then retry. + L’applet de commande ne peut pas s’exécuter, car les paramètres en conflit suivants sont spécifiés : Credential et UseDefaultCredentials. Spécifiez soit Credential, soit UseDefaultCredentials, puis réessayez. - Path '{0}' resolves to a directory. Specify a path including a file name, and then retry the command. + Le chemin d’accès «{0}» est résolu en répertoire. Spécifiez un chemin d’accès incluant un nom de fichier, puis réessayez la commande. - The provided JSON includes a property whose name is an empty string, this is only supported using the -AsHashTable switch. + Le JSON fourni inclut une propriété dont le nom est une chaîne vide, qui n’est prise en charge qu’à l’aide du commutateur -AsHashTable. - Cannot convert the JSON string because a dictionary that was converted from the string contains the duplicated key '{0}'. + Impossible de convertir la chaîne JSON, car un dictionnaire qui a été converti à partir de la chaîne contient la clé dupliquée '{0}'. - The response content cannot be parsed because the Internet Explorer engine is not available, or Internet Explorer's first-launch configuration is not complete. Specify the UseBasicParsing parameter and try again. + Impossible d’analyser le contenu de la réponse, car le moteur de Internet Explorer n’est pas disponible ou la configuration du premier lancement de Internet Explorer n’est pas terminée. Spécifiez le paramètre UseBasicParsing et réessayez. - Cannot follow an insecure redirection by default. Reissue the command specifying the -AllowInsecureRedirect switch. + Impossible de suivre une redirection non sécurisée par défaut. Réexécutez la commande spécifiant le commutateur -AllowInsecureRedirect. - Cannot convert the JSON string because it contains keys with different casing. Please use the -AsHashTable switch instead. The key that was attempted to be added to the existing key '{0}' was '{1}'. + Impossible de convertir la chaîne JSON, car elle contient des clés avec une casse différente. Utilisez plutôt le commutateur -AsHashTable. La clé qui a été tentée d’être ajoutée à la clé existante «{0}» était «{1}». - The maximum redirection count has been exceeded. To increase the number of redirections allowed, supply a higher value to the -MaximumRedirection parameter. + Le nombre maximal de redirections a été dépassé. Pour augmenter le nombre de redirections autorisées, fournissez une valeur supérieure au paramètre -MaximumRedirection. - Path '{0}' can be resolved to multiple paths. + Le chemin d’accès '{0}' peut être résolu en plusieurs chemins d’accès. - The type '{0}' is not supported for serialization or deserialization of a dictionary. Keys must be strings. + Le type '{0}' n’est pas pris en charge pour la sérialisation ou la désérialisation d’un dictionnaire. Les clés doivent être des chaînes. - Path '{0}' cannot be resolved to a file. + Impossible de résoudre le chemin d’accès '{0}' dans un fichier. - Path '{0}' is not a file system path. Please specify the path to a file in the file system. + Le chemin d’accès '{0}' n’est pas un chemin d’accès au système de fichiers. Spécifiez le chemin d’accès à un fichier dans le système de fichiers. - The cmdlet cannot run because the following parameter is missing: OutFile. Provide a valid OutFile parameter value when using the {0} parameter, then retry. + L’applet de commande ne peut pas s’exécuter, car le paramètre suivant est manquant : OutFile. Fournissez une valeur de paramètre OutFile valide lors de l’utilisation du paramètre {0}, puis réessayez. - The file will not be re-downloaded because the remote file is the same size as the OutFile: {0} + Le fichier ne sera pas retéléchargé car le fichier distant a la même taille que le fichier de sortie : {0} - The cmdlet cannot run because the following conflicting parameters are specified: ProxyCredential and ProxyUseDefaultCredentials. Specify either ProxyCredential or ProxyUseDefaultCredentials, then retry. + L’applet de commande ne peut pas s’exécuter, car les paramètres en conflit suivants sont spécifiés : ProxyCredential et ProxyUseDefaultCredentials. Spécifiez ProxyCredential ou ProxyUseDefaultCredentials, puis réessayez. - The cmdlet cannot run because the following parameter is missing: Proxy. Provide a valid proxy URI for the Proxy parameter when using the ProxyCredential or ProxyUseDefaultCredentials parameters, then retry. + L’applet de commande ne peut pas s’exécuter, car le paramètre suivant est manquant : Proxy. Fournissez un URI de proxy valide pour le paramètre Proxy lors de l’utilisation des paramètres ProxyCredential ou ProxyUseDefaultCredentials, puis réessayez. - Reading web response stream completed. Bytes downloaded: {0} + Lecture du flux de réponse web terminée. Octets téléchargés : {0} - Reading web response stream + Lecture du flux de réponse web - Downloaded: {0} of {1} + Téléchargé : {0} de {1} - The Resume switch can only be used if OutFile targets a file but it resolves to a directory: {0}. + Le commutateur Resume ne peut être utilisé que si OutFile cible un fichier, mais qu’il se résout en répertoire : {0}. - The cmdlet cannot run because the following conflicting parameters are specified: Session and SessionVariable. Specify either Session or SessionVariable, then retry. + L’applet de commande ne peut pas s’exécuter, car les paramètres en conflit suivants sont spécifiés : Session et SessionVariable. Spécifiez Session ou SessionVariable, puis réessayez. - Unable to retrieve certificates because the thumbprint is not valid. Verify the thumbprint and retry. + Impossible de récupérer les certificats, car l’empreinte numérique n’est pas valide. Vérifiez l’empreinte numérique et réessayez. - Web request completed. (Number of bytes processed: {0}) + Requête Web terminée. (Nombre d’octets traités : {0}) - Web request cancelled. (Number of bytes processed: {0}) + Requête Web annulée. (Nombre d’octets traités : {0}) - Web request status + État de la requête Web - Downloaded: {0} of {1} + Téléchargé : {0} de {1} - Conversion from JSON failed with error: {0} + Échec de la conversion à partir de JSON avec l’erreur : {0} - Response status code does not indicate success: {0} ({1}). + Le code d’état de réponse n’a pas abouti : {0} ({1}). - Following rel link {0} + Lien rel suivant {0} - The remote server indicated it could not resume downloading. The local file will be overwritten. + Le serveur distant a indiqué qu’il n’a pas pu reprendre le téléchargement. Le fichier local sera remplacé. - Received HTTP/{0} response of content type {1} of unknown size + Réponse HTTP/{0} reçue du type de contenu {1} d’une taille inconnue - Retrying after interval of {0} seconds. Status code for previous attempt: {1} + Nouvelle tentative après intervalle de {0} secondes. Code d’état pour la tentative précédente : {1} - Resulting JSON is truncated as serialization has exceeded the set depth of {0}. + Le JSON obtenu est tronqué, car la sérialisation a dépassé la profondeur définie de {0}. - The WebSession properties were changed between requests forcing all HTTP connections in the session to be recreated. + Les propriétés WebSession ont été modifiées entre les requêtes forçant la recréation de toutes les connexions HTTP de la session. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/it/ConvertHTMLStrings.it.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/it/ConvertHTMLStrings.it.resx index 865447e08b4..9ecc946b021 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/it/ConvertHTMLStrings.it.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/it/ConvertHTMLStrings.it.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Accepted meta properties are content-type, default-style, application-name, author, description, generator, keywords, x-ua-compatible, and viewport. The meta pair: {0} and {1} may not function correctly. + Le metaproprietà accettate sono content-type, default-style, application-name, author, description, generator, keywords, x-ua-compatible e viewport. La metacoppia: {0} e {1} potrebbe non funzionare correttamente. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/it/Debugger.it.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/it/Debugger.it.resx index d5dfffa76e6..ab4292b7387 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/it/Debugger.it.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/it/Debugger.it.resx @@ -118,63 +118,63 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Line cannot be less than 1. + La riga non può essere minore di 1. - There is no breakpoint with ID '{0}'. + Nessun punto di interruzione con ID ''{0}''. Il file '{0}' non esiste. - Cannot set breakpoint on file '{0}'; only *.ps1 and *.psm1 files are valid. + Non è possibile impostare il punto di interruzione sul file ''{0}''; sono validi solo i file *.ps1 e *.psm1. - Debugging is not supported on remote sessions. + Il debug non è supportato nelle sessioni remote. - Cannot set breakpoint. The language mode for this session is incompatible with the system-wide language mode. + Non è possibile impostare il punto di interruzione. La modalità linguaggio per questa sessione non è compatibile con la modalità linguaggio a livello di sistema. - Breakpoints cannot be set in the remote session because remote debugging is not supported by the current host. + Impossibile impostare i punti di interruzione nella sessione remota perché il debug remoto non è supportato dall'host corrente. - You cannot debug the default host Runspace using this cmdlet. To debug the default Runspace use the normal debugging commands from the host. + Non è possibile eseguire il debug dello spazio di esecuzione host predefinito utilizzando questo cmdlet. Per eseguire il debug dello spazio di esecuzione predefinito, usare i normali comandi di debug dall'host. - Cannot debug Runspace. The host has no debugger. Try debugging the Runspace inside the PowerShell console or with Visual Studio Code, both of which have built-in debuggers. + Non è possibile eseguire il debug dello spazio di esecuzione. L'host non dispone di alcun debugger. Provare a eseguire il debug dello spazio di esecuzione all'interno della console di PowerShell o con Visual Studio Code, entrambi con debugger predefiniti. - Cannot debug Runspace. There is no host or host UI. The debugger requires a host and host UI for debugging. + Non è possibile eseguire il debug dello spazio di esecuzione. Non è presente alcun host o alcuna interfaccia utente dell'host. Il debugger richiede un host e un'interfaccia utente dell'host per il debug. - More than one Runspace was found. Only one Runspace can be debugged at a time. + Sono stati trovati più spazi di esecuzione. È possibile eseguire il debug di un solo spazio di esecuzione alla volta. - To end the debugging session type the 'Detach' command at the debugger prompt, or type 'Ctrl+C' otherwise. + Per terminare la sessione di debug, digitare il comando ''Detach'' al prompt del debugger oppure digitare ''Ctrl+C'' in caso contrario. - Command or script completed. + Comando o script completato. - Debugging Runspace: {0} + Debug dello spazio di esecuzione: {0} - Cannot set debug options on Runspace {0} because it is not in the Opened state. + Non è possibile impostare le opzioni di debug sullo spazio di esecuzione {0} perché non è nello stato Aperto. - Failed to persist debug options for Process {0}. + Non è possibile rendere persistenti le opzioni di debug per il processo {0}%1. - No debugger was found for Runspace {0}. + Nessun debugger trovato per lo spazio di esecuzione {0}. - No Runspace was found. + Non è stato trovato alcuno spazio di esecuzione. - Wait-Debugger called on line {0} in {1}. + Wait-Debugger chiamato nella riga {0} in {1}. - A breakpoint associated with another runspace cannot be updated because there is no runspace with instance ID '{0}'. + Non è possibile aggiornare un punto di interruzione associato a un altro spazio di esecuzione perché non esiste alcuno spazio di esecuzione con ID istanza ''{0}''. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/it/GetMember.it.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/it/GetMember.it.resx index 5ad7b93b9c4..4d899fe8bbf 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/it/GetMember.it.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/it/GetMember.it.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - You must specify an object for the Get-Member cmdlet. + È necessario specificare un oggetto per il cmdlet Get-Member. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/it/GetUptimeStrings.it.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/it/GetUptimeStrings.it.resx index a9d0be9630e..4ad37207f8c 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/it/GetUptimeStrings.it.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/it/GetUptimeStrings.it.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - "The platform is not supported (System.Diagnostics.Stopwatch.IsHighResolution is false)." + ''La piattaforma non è supportata (System.Diagnostics.Stopwatch.IsHighResolution è false)''. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/it/MatchStringStrings.it.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/it/MatchStringStrings.it.resx index bc7da6005b7..5fd73507c11 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/it/MatchStringStrings.it.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/it/MatchStringStrings.it.resx @@ -118,18 +118,18 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot open the file because the current provider ({0}) cannot open files. + Non è possibile aprire il file perché il provider corrente ({0}) non può aprire i file. - The file {0} cannot be read: {1} + Non è possibile leggere il file {0}: {1} - The option "Context" is not valid when searching results that are piped from Select-String output. + L'opzione "Context" non è valida quando si cercano risultati inviati tramite pipe dall'output di Select-String. - The string {0} is not a valid regular expression: {1} + La stringa {0} non è un'espressione regolare valida: {1} - You must specify -Culture parameter only with -SimpleMatch parameter. + È necessario specificare il parametro -Culture solo con il parametro -SimpleMatch. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/ja/ConvertHTMLStrings.ja.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/ja/ConvertHTMLStrings.ja.resx index 865447e08b4..04649afc33c 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/ja/ConvertHTMLStrings.ja.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/ja/ConvertHTMLStrings.ja.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Accepted meta properties are content-type, default-style, application-name, author, description, generator, keywords, x-ua-compatible, and viewport. The meta pair: {0} and {1} may not function correctly. + 受け付け可能なメタ プロパティは、content-type、default-style、application-name、author、description、generator、keywords、x-ua-compatible、および viewport です。メタ ペア {0} および {1} は、正しく機能しない可能性があります。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/ja/Debugger.ja.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/ja/Debugger.ja.resx index bb3e7a77f25..fcf339fb356 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/ja/Debugger.ja.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/ja/Debugger.ja.resx @@ -118,63 +118,63 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Line cannot be less than 1. + 値を 1 より小さくすることはできません。 - There is no breakpoint with ID '{0}'. + ID '{0}' のブレークポイントはありません。 ファイル '{0}' が存在しません。 - Cannot set breakpoint on file '{0}'; only *.ps1 and *.psm1 files are valid. + ファイル '{0}' にブレークポイントを設定できません。*.ps1 ファイルと *.psm1 ファイルのみが有効です。 - Debugging is not supported on remote sessions. + デバッグはリモート セッションではサポートされていません。 - Cannot set breakpoint. The language mode for this session is incompatible with the system-wide language mode. + ブレークポイントを設定できません。このセッションの言語モードは、システム全体の言語モードと互換性がありません。 - Breakpoints cannot be set in the remote session because remote debugging is not supported by the current host. + リモート デバッグは現在のホストでサポートされていないため、リモート セッションでブレークポイントを設定できません。 - You cannot debug the default host Runspace using this cmdlet. To debug the default Runspace use the normal debugging commands from the host. + このコマンドレットを使用して既定のホスト実行空間をデバッグすることはできません。既定の実行空間をデバッグするには、ホストからの通常のデバッグ コマンドを使用します。 - Cannot debug Runspace. The host has no debugger. Try debugging the Runspace inside the PowerShell console or with Visual Studio Code, both of which have built-in debuggers. + 実行空間をデバッグできません。ホストにデバッガーがありません。PowerShell コンソール内または Visual Studio Code を使用して実行空間をデバッグしてみてください。どちらもデバッガーが組み込まれています。 - Cannot debug Runspace. There is no host or host UI. The debugger requires a host and host UI for debugging. + 実行空間をデバッグできません。ホストまたはホスト UI がありません。デバッガーには、デバッグ用のホストとホスト UI が必要です。 - More than one Runspace was found. Only one Runspace can be debugged at a time. + 複数の実行空間が見つかりました。一度にデバッグできる実行空間は 1 つだけです。 - To end the debugging session type the 'Detach' command at the debugger prompt, or type 'Ctrl+C' otherwise. + デバッグ セッションを終了するには、デバッガー プロンプトで 'Detach' コマンドを入力するか、それ以外の場合は 「Ctrl +C」と入力します。 - Command or script completed. + コマンドまたはスクリプトが完了しました。 - Debugging Runspace: {0} + 実行空間のデバッグ: {0} - Cannot set debug options on Runspace {0} because it is not in the Opened state. + 実行空間 {0} でデバッグ オプションを設定できません。このオプションは Opened 状態ではありません。 - Failed to persist debug options for Process {0}. + プロセス {0} のデバッグ オプションを保持できませんでした。 - No debugger was found for Runspace {0}. + 実行空間 {0} のデバッガーが見つかりませんでした。 - No Runspace was found. + 実行空間が見つかりませんでした。 - Wait-Debugger called on line {0} in {1}. + {1} の行 {0} で Wait-Debugger が呼び出されました。 - A breakpoint associated with another runspace cannot be updated because there is no runspace with instance ID '{0}'. + インスタンス ID '{0}' の実行空間がないため、別の実行空間に関連付けられているブレークポイントを更新できません。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/ja/MatchStringStrings.ja.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/ja/MatchStringStrings.ja.resx index bc7da6005b7..8e7454a566d 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/ja/MatchStringStrings.ja.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/ja/MatchStringStrings.ja.resx @@ -118,18 +118,18 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot open the file because the current provider ({0}) cannot open files. + 現在のプロバイダー ({0}) ではファイルを開けないため、このファイルを開けません。 - The file {0} cannot be read: {1} + ファイル '{0}' を読み取れません: {1} - The option "Context" is not valid when searching results that are piped from Select-String output. + Select-String 出力からパイプ処理された結果を検索する場合、オプション "Context" は無効です。 - The string {0} is not a valid regular expression: {1} + 文字列 {0} は有効な正規表現ではありません: {1} - You must specify -Culture parameter only with -SimpleMatch parameter. + -Culture パラメーターは、-SimpleMatch パラメーターと共にのみ指定する必要があります。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/ja/WebCmdletStrings.ja.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/ja/WebCmdletStrings.ja.resx index bed18b034cd..73d1bdd6610 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/ja/WebCmdletStrings.ja.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/ja/WebCmdletStrings.ja.resx @@ -121,132 +121,132 @@ パス '{0}' へのアクセスが拒否されました。 - The cmdlet cannot protect plain text secrets sent over unencrypted connections. To suppress this warning and send plain text secrets over unencrypted networks, reissue the command specifying the AllowUnencryptedAuthentication parameter. + このコマンドレットは、暗号化されていない接続経由で送信されるプレーン テキスト シークレットを保護できません。この警告を抑制し、暗号化されていないネットワーク経由でプレーン テキスト シークレットを送信するには、AllowUnencryptedAuthentication パラメーターを指定してコマンドを再実行します。 - The cmdlet cannot run because the following conflicting parameters are specified: Authentication and UseDefaultCredentials. Authentication does not support Default Credentials. Specify either Authentication or UseDefaultCredentials, then retry. + 次の競合するパラメーターが指定されているため、コマンドレットを実行できません: Authentication と UseDefaultCredentials。Authentication は、Default Credentials をサポートしていません。Authentication または UseDefaultCredentials のいずれかを指定してから、再試行してください。 - The cmdlet cannot run because the following parameter is not specified: Credential. The supplied Authentication type requires a Credential. Specify Credential, then retry. + 次のパラメーターが指定されていないため、コマンドレットを実行できません: Credential。指定された認証の種類には Credential が必要です。資格情報を指定してから、再試行してください。 - The cmdlet cannot run because the following parameter is not specified: Token. The supplied Authentication type requires a Token. Specify Token, then retry. + 次のパラメーターが指定されていないため、コマンドレットを実行できません: Token。指定された認証の種類には Token が必要です。Token を指定してから、再試行してください。 - The cmdlet cannot run because the following conflicting parameters are specified: Credential and Token. Specify either Credential or Token, then retry. + 次の競合するパラメーターが指定されているため、コマンドレットを実行できません: Credeital と Token。Credential または Token を指定してから、再試行してください。 - The cmdlet cannot run because the following conflicting parameters are specified: Body and InFile. Specify either Body or Infile, then retry. + 次の競合するパラメーターが指定されているため、コマンドレットを実行できません: Body と InFile。Body または Infile のいずれかを指定してから、再試行してください。 - The cmdlet cannot run because the following conflicting parameters are specified: Body and Form. Specify either Body or Form, then retry. + 次の競合するパラメーターが指定されているため、コマンドレットを実行できません: Body と Form。Body または Form のいずれかを指定してから、再試行してください。 - The cmdlet cannot run because the following conflicting parameters are specified: InFile and Form. Specify either InFile or Form, then retry. + 次の競合するパラメーターが指定されているため、コマンドレットを実行できません: InFile と Form。InFile または Form のいずれかを指定してから、再試行してください。 - The cmdlet cannot run because the -ContentType parameter is not a valid Content-Type header. Specify a valid Content-Type for -ContentType, then retry. To suppress header validation, supply the -SkipHeaderValidation parameter. + -ContentType パラメーターが有効な Content-Type ヘッダーではないため、コマンドレットを実行できません。-ContentType に有効な Content-Type を指定してから、再試行してください。ヘッダーの検証を抑制するには、-SkipHeaderValidation パラメーターを指定します。 - The cmdlet cannot run because the following conflicting parameters are specified: Credential and UseDefaultCredentials. Specify either Credential or UseDefaultCredentials, then retry. + 次の競合するパラメーターが指定されているため、コマンドレットを実行できません: Credeital と UseDefaultCredentials。Credential または UseDefaultCredentials のいずれかを指定してから、再試行してください。 - Path '{0}' resolves to a directory. Specify a path including a file name, and then retry the command. + パス '{0}' はディレクトリに解決されます。ファイル名を含むパスを指定してから、コマンドを再試行してください。 - The provided JSON includes a property whose name is an empty string, this is only supported using the -AsHashTable switch. + 指定された JSON には、名前が空の文字列であるプロパティが含まれています。これは -AsHashTable スイッチを使用してのみサポートされます。 - Cannot convert the JSON string because a dictionary that was converted from the string contains the duplicated key '{0}'. + 文字列から変換されたディクショナリに重複するキー '{0}' が含まれているため、JSON 文字列を変換できません。 - The response content cannot be parsed because the Internet Explorer engine is not available, or Internet Explorer's first-launch configuration is not complete. Specify the UseBasicParsing parameter and try again. + Internet Explorer エンジンが使用できないか、Internet Explorer の初回起動構成が完了していないため、応答コンテンツを解析できません。UseBasicParsing パラメーターを指定して、もう一度やり直してください。 - Cannot follow an insecure redirection by default. Reissue the command specifying the -AllowInsecureRedirect switch. + 既定では、安全でないリダイレクトに従うことはできません。-AllowInsecureRedirect スイッチを指定してコマンドを再実行します。 - Cannot convert the JSON string because it contains keys with different casing. Please use the -AsHashTable switch instead. The key that was attempted to be added to the existing key '{0}' was '{1}'. + 大文字と小文字が異なるキーが含まれているため、JSON 文字列を変換できません。代わりに -AsHashTable スイッチを使用してください。既存のキー '{0}' に追加しようとしたキーは '{1}' でした。 - The maximum redirection count has been exceeded. To increase the number of redirections allowed, supply a higher value to the -MaximumRedirection parameter. + リダイレクトの最大数を超えました。許可されるリダイレクトの数を増やすには、-MaximumRedirection パラメーターにより大きい値を指定します。 - Path '{0}' can be resolved to multiple paths. + パス '{0}' は複数のパスに解決できます。 - The type '{0}' is not supported for serialization or deserialization of a dictionary. Keys must be strings. + 型 '{0}' は、ディクショナリのシリアル化または逆シリアル化ではサポートされていません。キーは文字列である必要があります。 - Path '{0}' cannot be resolved to a file. + パス '{0}' をファイルに解決できません。 - Path '{0}' is not a file system path. Please specify the path to a file in the file system. + パス '{0}' はファイル システム パスではありません。ファイル システム内のファイルへのパスを指定してください。 - The cmdlet cannot run because the following parameter is missing: OutFile. Provide a valid OutFile parameter value when using the {0} parameter, then retry. + 次のパラメーターがないため、コマンドレットを実行できません: OutFile。{0} パラメーターを使用する場合は、有効な OutFile パラメーター値を指定してから、再試行してください。 - The file will not be re-downloaded because the remote file is the same size as the OutFile: {0} + リモート ファイルが OutFile: {0} と同じサイズであるため、ファイルは再ダウンロードされません - The cmdlet cannot run because the following conflicting parameters are specified: ProxyCredential and ProxyUseDefaultCredentials. Specify either ProxyCredential or ProxyUseDefaultCredentials, then retry. + 次の競合するパラメーターが指定されているため、コマンドレットを実行できません: ProxyCredential と ProxyUseDefaultCredentials。ProxyCredential または ProxyUseDefaultCredentials のいずれかを指定してから、再試行してください。 - The cmdlet cannot run because the following parameter is missing: Proxy. Provide a valid proxy URI for the Proxy parameter when using the ProxyCredential or ProxyUseDefaultCredentials parameters, then retry. + 次のパラメーターがないため、コマンドレットを実行できません: Proxy。ProxyCredential パラメーターまたは ProxyUseDefaultCredentials パラメーターを使用する場合は、Proxy パラメーターの有効なプロキシ URI を指定してから、再試行してください。 - Reading web response stream completed. Bytes downloaded: {0} + Web 応答ストリームの読み取りが完了しました。ダウンロード済みのバイト数: {0} - Reading web response stream + Web 応答ストリームを読み取っています - Downloaded: {0} of {1} + ダウンロード済み: {0}/{1} - The Resume switch can only be used if OutFile targets a file but it resolves to a directory: {0}. + Resume スイッチは、OutFile がファイルをターゲットにしているが、ディレクトリに解決される場合にのみ使用できます: {0}。 - The cmdlet cannot run because the following conflicting parameters are specified: Session and SessionVariable. Specify either Session or SessionVariable, then retry. + 次の競合するパラメーターが指定されているため、コマンドレットを実行できません: Session と SessionVariable。Session または SessionVariable のいずれかを指定してから、再試行してください。 - Unable to retrieve certificates because the thumbprint is not valid. Verify the thumbprint and retry. + 拇印が無効なため、証明書を取得できません。拇印を確認してから再試行してください。 - Web request completed. (Number of bytes processed: {0}) + Web 要求が完了しました。(処理されたバイト数: {0}) - Web request cancelled. (Number of bytes processed: {0}) + Web 要求がキャンセルされました。(処理されたバイト数: {0}) - Web request status + Web 要求の状態 - Downloaded: {0} of {1} + ダウンロード済み: {0}/{1} - Conversion from JSON failed with error: {0} + JSON からの変換が次のエラーで失敗しました: {0} - Response status code does not indicate success: {0} ({1}). + 応答の状態コードは成功を示しません: {0} ({1})。 - Following rel link {0} + 次の rel リンク {0} - The remote server indicated it could not resume downloading. The local file will be overwritten. + リモート サーバーからダウンロードを再開できなかったことが示されました。ローカル ファイルが上書きされます。 - Received HTTP/{0} response of content type {1} of unknown size + 不明なサイズのコンテンツ タイプ {1} の HTTP/{0} 応答を受信しました - Retrying after interval of {0} seconds. Status code for previous attempt: {1} + {0} 秒のサイクル期間後に再試行しています。前回の試行の状態コード: {1} - Resulting JSON is truncated as serialization has exceeded the set depth of {0}. + シリアル化が {0} の設定された深さを超えたので、結果の JSON は切り捨てられます。 - The WebSession properties were changed between requests forcing all HTTP connections in the session to be recreated. + WebSession プロパティは、セッション内のすべての HTTP 接続を再作成する要求間で変更されました。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/pl/ConvertHTMLStrings.pl.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/pl/ConvertHTMLStrings.pl.resx index 865447e08b4..ebf1ec21a5a 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/pl/ConvertHTMLStrings.pl.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/pl/ConvertHTMLStrings.pl.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Accepted meta properties are content-type, default-style, application-name, author, description, generator, keywords, x-ua-compatible, and viewport. The meta pair: {0} and {1} may not function correctly. + Akceptowane właściwości metadanych to typ zawartości, domyślny styl, nazwa aplikacji, autor, opis, generator, słowa kluczowe, zgodne ze standardem x-ua i okienko ekranu. Para metadanych: {0} i {1} może nie działać poprawnie. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/pl/Debugger.pl.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/pl/Debugger.pl.resx index c22b0885147..d46a1560f8d 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/pl/Debugger.pl.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/pl/Debugger.pl.resx @@ -118,63 +118,63 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Line cannot be less than 1. + Wiersz nie może być mniejszy niż 1. - There is no breakpoint with ID '{0}'. + Brak punktu przerwania o identyfikatorze „{0}”. Plik „{0}” nie istnieje. - Cannot set breakpoint on file '{0}'; only *.ps1 and *.psm1 files are valid. + Nie można ustawić punktu przerwania w pliku „{0}”; tylko pliki *.ps1 i *.psm1 są prawidłowe. - Debugging is not supported on remote sessions. + Debugowanie nie jest obsługiwane w sesjach zdalnych. - Cannot set breakpoint. The language mode for this session is incompatible with the system-wide language mode. + Nie można ustawić punktu przerwania. Tryb językowy dla tej sesji jest niezgodny z trybem języka w całym systemie. - Breakpoints cannot be set in the remote session because remote debugging is not supported by the current host. + Nie można ustawić punktów przerwania w sesji zdalnej, ponieważ zdalne debugowanie nie jest obsługiwane przez bieżącego hosta. - You cannot debug the default host Runspace using this cmdlet. To debug the default Runspace use the normal debugging commands from the host. + Za pomocą tego polecenia cmdlet nie można debugować domyślnego obszaru działania hosta. Aby debugować domyślny obszar działania, użyj normalnych poleceń debugowania z hosta. - Cannot debug Runspace. The host has no debugger. Try debugging the Runspace inside the PowerShell console or with Visual Studio Code, both of which have built-in debuggers. + Nie można debugować obszaru działania. Host nie ma debugera. Spróbuj debugować obszar działania w konsoli programu PowerShell lub za pomocą programu Visual Studio Code, z których oba mają wbudowane debugery. - Cannot debug Runspace. There is no host or host UI. The debugger requires a host and host UI for debugging. + Nie można debugować obszaru działania. Brak hosta lub interfejsu użytkownika hosta. Debuger wymaga hosta i interfejsu użytkownika hosta do debugowania. - More than one Runspace was found. Only one Runspace can be debugged at a time. + Znaleziono więcej niż jeden obszar działania. Jednocześnie można debugować tylko jeden obszar działania. - To end the debugging session type the 'Detach' command at the debugger prompt, or type 'Ctrl+C' otherwise. + Aby zakończyć sesję debugowania, wpisz polecenie „Detach” w wierszu polecenia debugera lub wpisz „Ctrl+C” w przeciwnym razie. - Command or script completed. + Zakończono wykonywanie polecenia lub skryptu. - Debugging Runspace: {0} + Debugowanie obszaru działania: {0} - Cannot set debug options on Runspace {0} because it is not in the Opened state. + Nie można ustawić opcji debugowania w obszarze działania {0}, ponieważ nie jest on w stanie Otwarty. - Failed to persist debug options for Process {0}. + Nie można utrwalić opcji debugowania dla procesu {0}. - No debugger was found for Runspace {0}. + Nie znaleziono debugera dla obszaru działania {0}. - No Runspace was found. + Nie znaleziono obszaru działania. - Wait-Debugger called on line {0} in {1}. + Wywołano funkcję Wait-Debugger w wierszu {0} w {1}. - A breakpoint associated with another runspace cannot be updated because there is no runspace with instance ID '{0}'. + Nie można zaktualizować punktu przerwania skojarzonego z innym obszarem działania, ponieważ nie ma obszaru działania o identyfikatorze wystąpienia „{0}”. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/pl/GetMember.pl.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/pl/GetMember.pl.resx index 5ad7b93b9c4..810b02c6e40 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/pl/GetMember.pl.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/pl/GetMember.pl.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - You must specify an object for the Get-Member cmdlet. + Należy określić obiekt dla polecenia cmdlet Get-Member. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/pl/GetUptimeStrings.pl.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/pl/GetUptimeStrings.pl.resx index a9d0be9630e..9de156d18cd 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/pl/GetUptimeStrings.pl.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/pl/GetUptimeStrings.pl.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - "The platform is not supported (System.Diagnostics.Stopwatch.IsHighResolution is false)." + „Platforma nie jest obsługiwana (System.Diagnostics.Stopwatch.IsHighResolution ma wartość false)”. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/pl/NewObjectStrings.pl.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/pl/NewObjectStrings.pl.resx index 4d5839056f7..b3270bf2a05 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/pl/NewObjectStrings.pl.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/pl/NewObjectStrings.pl.resx @@ -118,45 +118,45 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - A constructor was not found. Cannot find an appropriate constructor for type {0}. + Nie znaleziono konstruktora. Nie można odnaleźć odpowiedniego konstruktora dla typu {0}. - Cannot find type [{0}]: verify that the assembly containing this type is loaded. + Nie można odnaleźć typu [{0}]: sprawdź, czy zestaw zawierający ten typ jest załadowany. - Cannot load COM type {0}. + Nie można załadować typu COM {0}. - The object written to the pipeline is an instance of the type "{0}" from the component's primary interoperability assembly. If this type exposes different members than the IDispatch members, scripts that are written to work with this object might not work if the primary interoperability assembly is not installed. + Obiekt zapisany w potoku jest wystąpieniem typu „{0}” z podstawowego zestawu współdziałania składnika. Jeśli ten typ uwidacznia inne elementy członkowskie niż elementy członkowskie IDispatch, skrypty napisane do pracy z tym obiektem mogą nie działać, jeśli podstawowy zestaw współdziałania nie jest zainstalowany. - The member "{1}" was not found for the specified {2} object. + Nie znaleziono elementu członkowskiego „{1}” dla określonego obiektu {2}. - The value supplied is not valid, or the property is read-only. Change the value, and then try again. + Podana wartość jest nieprawidłowa lub właściwość jest tylko do odczytu. Zmień wartość, a następnie spróbuj ponownie. - Creating instances of attribute and delegated Windows RT types is not supported. + Tworzenie wystąpień atrybutów i delegowanych typów systemu Windows RT nie jest obsługiwane. - Cannot create instances of the ByRef-like type "{0}". ByRef-like types are not supported in PowerShell. + Nie można utworzyć wystąpień typu ByRef „{0}”. Typy podobne do ByRef nie są obsługiwane w programie PowerShell. - Cannot create type. Only core types are supported in this language mode. + Nie można utworzyć typu. W tym trybie języka są obsługiwane tylko typy podstawowe. - Cannot create type. Only core types are supported in {0} language mode on a policy locked down machine. + Nie można utworzyć typu. W trybie języka {0} na maszynie z zablokowanymi zasadami są obsługiwane tylko typy podstawowe. - New-Object Cmdlet Type Creation + Tworzenie typu polecenia cmdlet New-Object - The type '{0}' will not be created in ConstrainedLanguage mode. + Typ „{0}” nie zostanie utworzony w trybie ConstrainedLanguage. - New-Object Cmdlet COM Object Creation + Tworzenie obiektu COM polecenia cmdlet New-Object - The COM object '{0}' will not be created in ConstrainedLanguage mode. + Obiekt COM „{0}” nie zostanie utworzony w trybie ConstrainedLanguage. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/pl/WebCmdletStrings.pl.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/pl/WebCmdletStrings.pl.resx index beb82618d2c..890639dd631 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/pl/WebCmdletStrings.pl.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/pl/WebCmdletStrings.pl.resx @@ -121,132 +121,132 @@ Odmowa dostępu do ścieżki „{0}”. - The cmdlet cannot protect plain text secrets sent over unencrypted connections. To suppress this warning and send plain text secrets over unencrypted networks, reissue the command specifying the AllowUnencryptedAuthentication parameter. + Polecenie cmdlet nie może chronić wpisów tajnych zwykłego tekstu wysyłanych za pośrednictwem niezaszyfrowanych połączeń. Aby pominąć to ostrzeżenie i wysłać wpisy tajne w postaci zwykłego tekstu za pośrednictwem niezaszyfrowanych sieci, ponownie uruchom polecenie, określając parametr AllowUnencryptedAuthentication. - The cmdlet cannot run because the following conflicting parameters are specified: Authentication and UseDefaultCredentials. Authentication does not support Default Credentials. Specify either Authentication or UseDefaultCredentials, then retry. + Nie można uruchomić polecenia cmdlet, ponieważ określono następujące parametry powodujące konflikt: Authentication i UseDefaultCredentials. Uwierzytelnianie nie obsługuje poświadczeń domyślnych. Określ wartość parametru Authentication lub UseDefaultCredentials, a następnie spróbuj ponownie. - The cmdlet cannot run because the following parameter is not specified: Credential. The supplied Authentication type requires a Credential. Specify Credential, then retry. + Nie można uruchomić polecenia cmdlet, ponieważ nie określono następującego parametru: Credential. Podany typ uwierzytelniania wymaga poświadczenia. Określ poświadczenie, a następnie spróbuj ponownie. - The cmdlet cannot run because the following parameter is not specified: Token. The supplied Authentication type requires a Token. Specify Token, then retry. + Nie można uruchomić polecenia cmdlet, ponieważ nie określono następującego parametru: Token. Podany typ uwierzytelniania wymaga tokenu. Określ token, a następnie spróbuj ponownie. - The cmdlet cannot run because the following conflicting parameters are specified: Credential and Token. Specify either Credential or Token, then retry. + Nie można uruchomić polecenia cmdlet, ponieważ określono następujące parametry powodujące konflikt: Credential i Token. Określ poświadczenie lub token, a następnie spróbuj ponownie. - The cmdlet cannot run because the following conflicting parameters are specified: Body and InFile. Specify either Body or Infile, then retry. + Nie można uruchomić polecenia cmdlet, ponieważ określono następujące parametry powodujące konflikt: Body i InFile. Określ element Body lub Infile, a następnie spróbuj ponownie. - The cmdlet cannot run because the following conflicting parameters are specified: Body and Form. Specify either Body or Form, then retry. + Nie można uruchomić polecenia cmdlet, ponieważ określono następujące parametry powodujące konflikt: Body i Form. Określ treść lub formularz, a następnie spróbuj ponownie. - The cmdlet cannot run because the following conflicting parameters are specified: InFile and Form. Specify either InFile or Form, then retry. + Nie można uruchomić polecenia cmdlet, ponieważ określono następujące parametry powodujące konflikt: InFile i Form. Określ element InFile lub Form, a następnie spróbuj ponownie. - The cmdlet cannot run because the -ContentType parameter is not a valid Content-Type header. Specify a valid Content-Type for -ContentType, then retry. To suppress header validation, supply the -SkipHeaderValidation parameter. + Nie można uruchomić polecenia cmdlet, ponieważ parametr -ContentType nie jest prawidłowym nagłówkiem Content-Type. Określ prawidłowy typ zawartości dla parametru -ContentType, a następnie spróbuj ponownie. Aby pominąć sprawdzanie poprawności nagłówka, podaj parametr -SkipHeaderValidation. - The cmdlet cannot run because the following conflicting parameters are specified: Credential and UseDefaultCredentials. Specify either Credential or UseDefaultCredentials, then retry. + Nie można uruchomić polecenia cmdlet, ponieważ określono następujące parametry powodujące konflikt: Credential i UseDefaultCredentials. Określ wartość parametru Credential lub UseDefaultCredentials, a następnie spróbuj ponownie. - Path '{0}' resolves to a directory. Specify a path including a file name, and then retry the command. + Ścieżka „{0}” jest rozpoznawana jako katalog. Określ ścieżkę zawierającą nazwę pliku, a następnie spróbuj ponownie wykonać polecenie. - The provided JSON includes a property whose name is an empty string, this is only supported using the -AsHashTable switch. + Podany kod JSON zawiera właściwość, której nazwa jest pustym ciągiem. Jest to obsługiwane tylko przy użyciu przełącznika -AsHashTable. - Cannot convert the JSON string because a dictionary that was converted from the string contains the duplicated key '{0}'. + Nie można przekonwertować ciągu JSON, ponieważ słownik przekonwertowany z ciągu zawiera zduplikowany klucz „{0}”. - The response content cannot be parsed because the Internet Explorer engine is not available, or Internet Explorer's first-launch configuration is not complete. Specify the UseBasicParsing parameter and try again. + Nie można przeanalizować zawartości odpowiedzi, ponieważ aparat programu Internet Explorer jest niedostępny lub konfiguracja pierwszego uruchomienia programu Internet Explorer nie została ukończona. Określ parametr UseBasicParsing i spróbuj ponownie. - Cannot follow an insecure redirection by default. Reissue the command specifying the -AllowInsecureRedirect switch. + Domyślnie nie można wykonać niezabezpieczonego przekierowania. Ponownie uruchom polecenie określające przełącznik -AllowInsecureRedirect. - Cannot convert the JSON string because it contains keys with different casing. Please use the -AsHashTable switch instead. The key that was attempted to be added to the existing key '{0}' was '{1}'. + Nie można przekonwertować ciągu JSON, ponieważ zawiera on klucze o innej wielkości liter. Zamiast tego użyj przełącznika -AsHashTable. Klucz, który próbowano dodać do istniejącego klucza „{0}”, to „{1}”. - The maximum redirection count has been exceeded. To increase the number of redirections allowed, supply a higher value to the -MaximumRedirection parameter. + Przekroczono maksymalną liczbę przekierowań. Aby zwiększyć dozwoloną liczbę przekierowań, podaj wyższą wartość parametru -MaximumRedirection. - Path '{0}' can be resolved to multiple paths. + Ścieżkę „{0}” można rozpoznać na wiele ścieżek. - The type '{0}' is not supported for serialization or deserialization of a dictionary. Keys must be strings. + Typ „{0}” nie jest obsługiwany w przypadku serializacji ani deserializacji słownika. Klucze muszą być ciągami. - Path '{0}' cannot be resolved to a file. + Nie można rozpoznać ścieżki „{0}” jako pliku. - Path '{0}' is not a file system path. Please specify the path to a file in the file system. + Ścieżka „{0}” nie jest ścieżką systemu plików. Określ ścieżkę do pliku w systemie plików. - The cmdlet cannot run because the following parameter is missing: OutFile. Provide a valid OutFile parameter value when using the {0} parameter, then retry. + Nie można uruchomić polecenia cmdlet, ponieważ brakuje następującego parametru: OutFile. Podaj prawidłową wartość parametru OutFile podczas używania parametru {0}, a następnie spróbuj ponownie. - The file will not be re-downloaded because the remote file is the same size as the OutFile: {0} + Plik nie zostanie ponownie pobrany, ponieważ plik zdalny ma taki sam rozmiar jak plik OutFile: {0} - The cmdlet cannot run because the following conflicting parameters are specified: ProxyCredential and ProxyUseDefaultCredentials. Specify either ProxyCredential or ProxyUseDefaultCredentials, then retry. + Nie można uruchomić polecenia cmdlet, ponieważ określono następujące parametry powodujące konflikt: ProxyCredential i ProxyUseDefaultCredentials. Określ wartość parametru ProxyCredential lub ProxyUseDefaultCredentials, a następnie spróbuj ponownie. - The cmdlet cannot run because the following parameter is missing: Proxy. Provide a valid proxy URI for the Proxy parameter when using the ProxyCredential or ProxyUseDefaultCredentials parameters, then retry. + Nie można uruchomić polecenia cmdlet, ponieważ brakuje następującego parametru: Proxy. Podaj prawidłowy identyfikator URI serwera proxy dla parametru Proxy podczas korzystania z parametrów ProxyCredential lub ProxyUseDefaultCredentials, a następnie spróbuj ponownie. - Reading web response stream completed. Bytes downloaded: {0} + Zakończono odczytywanie strumienia odpowiedzi sieci Web. Pobrane bajty: {0} - Reading web response stream + Odczytywanie strumienia odpowiedzi sieci Web - Downloaded: {0} of {1} + Pobrano {0} z {1} - The Resume switch can only be used if OutFile targets a file but it resolves to a directory: {0}. + Przełącznika Resume można używać tylko wtedy, gdy parametr OutFile jest przeznaczony dla pliku, ale jest rozpoznawany jako katalog: {0}. - The cmdlet cannot run because the following conflicting parameters are specified: Session and SessionVariable. Specify either Session or SessionVariable, then retry. + Nie można uruchomić polecenia cmdlet, ponieważ określono następujące parametry powodujące konflikt: Session i SessionVariable. Określ parametr Session lub SessionVariable, a następnie spróbuj ponownie. - Unable to retrieve certificates because the thumbprint is not valid. Verify the thumbprint and retry. + Nie można pobrać certyfikatów, ponieważ odcisk palca jest nieprawidłowy. Sprawdź odcisk palca i spróbuj ponownie. - Web request completed. (Number of bytes processed: {0}) + Żądanie sieci Web zostało ukończone. (Liczba przetworzonych bajtów: {0}) - Web request cancelled. (Number of bytes processed: {0}) + Żądanie sieci Web zostało anulowane. (Liczba przetworzonych bajtów: {0}) - Web request status + Stan żądania sieci Web - Downloaded: {0} of {1} + Pobrano {0} z {1} - Conversion from JSON failed with error: {0} + Konwersja z pliku JSON nie powiodła się z powodu błędu: {0} - Response status code does not indicate success: {0} ({1}). + Kod stanu odpowiedzi nie oznacza powodzenia: {0} ({1}). - Following rel link {0} + Przechodzenie do łącza rel {0} - The remote server indicated it could not resume downloading. The local file will be overwritten. + Serwer zdalny wskazuje, że nie można wznowić pobierania. Plik lokalny zostanie zastąpiony. - Received HTTP/{0} response of content type {1} of unknown size + Odebrano odpowiedź HTTP/{0} typu zawartości {1} o nieznanym rozmiarze - Retrying after interval of {0} seconds. Status code for previous attempt: {1} + Ponawianie próby po upływie interwału {0} sekund. Kod stanu poprzedniej próby: {1} - Resulting JSON is truncated as serialization has exceeded the set depth of {0}. + Wynikowy kod JSON jest obcinany, ponieważ serializacja przekroczyła ustawioną głębokość {0}. - The WebSession properties were changed between requests forcing all HTTP connections in the session to be recreated. + Właściwości WebSession zostały zmienione między żądaniami wymuszania ponownego utworzenia wszystkich połączeń HTTP w sesji. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/ru/Debugger.ru.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/ru/Debugger.ru.resx index 5b669eeed0d..2d10b53401c 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/ru/Debugger.ru.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/ru/Debugger.ru.resx @@ -118,63 +118,63 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Line cannot be less than 1. + Строка не может быть меньше 1. - There is no breakpoint with ID '{0}'. + Точка останова с идентификатором {0} не найдена. Файл "{0}" не существует. - Cannot set breakpoint on file '{0}'; only *.ps1 and *.psm1 files are valid. + Не удалось установить точку останова в файле {0}; допустимы только файлы *.ps1 и *.psm1. - Debugging is not supported on remote sessions. + Отладка не поддерживается в удаленных сеансах. - Cannot set breakpoint. The language mode for this session is incompatible with the system-wide language mode. + Не удается задать точку останова. Языковой режим для данной сессии несовместим с общесистемным языковым режимом. - Breakpoints cannot be set in the remote session because remote debugging is not supported by the current host. + Невозможно установить точки останова в удаленном сеансе, так как текущий узел не поддерживает удаленную отладку. - You cannot debug the default host Runspace using this cmdlet. To debug the default Runspace use the normal debugging commands from the host. + С помощью этого командлета нельзя отлаживать пространство выполнения узла по умолчанию. Чтобы отлаживать пространство выполнения по умолчанию, используйте обычные команды отладки на узле. - Cannot debug Runspace. The host has no debugger. Try debugging the Runspace inside the PowerShell console or with Visual Studio Code, both of which have built-in debuggers. + Невозможно отладить пространство выполнения. На узле нет отладчика. Попробуйте выполнить отладку пространства выполнения на консоли PowerShell или в Visual Studio Code. Оба этих инструмента оснащены встроенными отладчиками. - Cannot debug Runspace. There is no host or host UI. The debugger requires a host and host UI for debugging. + Невозможно отладить пространство выполнения. Отсутствует узел или пользовательский интерфейс узла. Для отладки отладчику требуются узел и пользовательский интерфейс узла. - More than one Runspace was found. Only one Runspace can be debugged at a time. + Найдено несколько пространств выполнения. Одновременно можно отлаживать только одно пространство выполнения. - To end the debugging session type the 'Detach' command at the debugger prompt, or type 'Ctrl+C' otherwise. + Чтобы завершить сеанс отладки, введите команду Detach в командной строке отладчика или нажмите Ctrl+C в противном случае. - Command or script completed. + Выполнение команды или сценария завершено. - Debugging Runspace: {0} + Отладка пространства выполнения: {0} - Cannot set debug options on Runspace {0} because it is not in the Opened state. + Невозможно задать параметры отладки для пространства выполнения {0}, так как оно не находится в состоянии Opened. - Failed to persist debug options for Process {0}. + Не удалось сохранить параметры отладки для процесса {0}. - No debugger was found for Runspace {0}. + Для пространства выполнения {0} отладчик не найден. - No Runspace was found. + Пространство выполнения не найдено. - Wait-Debugger called on line {0} in {1}. + Вызов Wait-Debugger выполнен в строке {0} в {1}. - A breakpoint associated with another runspace cannot be updated because there is no runspace with instance ID '{0}'. + Точку останова, связанную с другим пространством выполнения, невозможно обновить, так как пространство выполнения с идентификатором экземпляра {0} отсутствует. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/ru/GetMember.ru.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/ru/GetMember.ru.resx index 5ad7b93b9c4..35d81e916e1 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/ru/GetMember.ru.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/ru/GetMember.ru.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - You must specify an object for the Get-Member cmdlet. + Для командлета Get-Member необходимо указать объект. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/ru/GetUptimeStrings.ru.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/ru/GetUptimeStrings.ru.resx index a9d0be9630e..536f7ebb43a 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/ru/GetUptimeStrings.ru.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/ru/GetUptimeStrings.ru.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - "The platform is not supported (System.Diagnostics.Stopwatch.IsHighResolution is false)." + Платформа не поддерживается (System.Diagnostics.Stopwatch.IsHighResolution равно false). \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/tr/ConvertHTMLStrings.tr.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/tr/ConvertHTMLStrings.tr.resx index 865447e08b4..6c0e085d9cf 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/tr/ConvertHTMLStrings.tr.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/tr/ConvertHTMLStrings.tr.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Accepted meta properties are content-type, default-style, application-name, author, description, generator, keywords, x-ua-compatible, and viewport. The meta pair: {0} and {1} may not function correctly. + Kabul edilen meta özellikler content-type, default-style, application-name, author, description, generator, keywords, x-ua-compatible ve viewport'tur. Meta eşleştirmesi: {0} ve {1} düzgün çalışmayabilir. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/tr/Debugger.tr.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/tr/Debugger.tr.resx index dfced76494e..d34b675340b 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/tr/Debugger.tr.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/tr/Debugger.tr.resx @@ -118,63 +118,63 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Line cannot be less than 1. + Satır 1’den küçük olamaz. - There is no breakpoint with ID '{0}'. + ‘{0}' kimliğine sahip bir kesme noktası yok. '{0}' dosyası yok. - Cannot set breakpoint on file '{0}'; only *.ps1 and *.psm1 files are valid. + ‘{0}' dosyasında kesme noktası ayarlanamıyor; yalnızca *.ps1 ve *.psm1 dosyaları geçerlidir. - Debugging is not supported on remote sessions. + Uzak oturumlarda hata ayıklama desteklenmiyor. - Cannot set breakpoint. The language mode for this session is incompatible with the system-wide language mode. + Kesme noktası ayarlanamıyor. Bu oturum için bilgisayar dili modu, sistem genelindeki bilgisayar dili modu ile uyumsuz. - Breakpoints cannot be set in the remote session because remote debugging is not supported by the current host. + Geçerli konak uzaktan hata ayıklamayı desteklemediğinden kesme noktaları uzak oturumda ayarlanamıyor. - You cannot debug the default host Runspace using this cmdlet. To debug the default Runspace use the normal debugging commands from the host. + Bu cmdlet’i kullanarak varsayılan konak Runspace’inde hata ayıklayamazsınız. Varsayılan Runspace’te hata ayıklamak için konaktaki normal hata ayıklama komutlarını kullanın. - Cannot debug Runspace. The host has no debugger. Try debugging the Runspace inside the PowerShell console or with Visual Studio Code, both of which have built-in debuggers. + Çalışma Alanında hata ayıklanamıyor. Barındırıcının hata ayıklayıcısı yok. Çalışma Alanını PowerShell konsolunda veya yerleşik hata ayıklayıcılara sahip olan Visual Studio Code ile hata ayıklamayı deneyin. - Cannot debug Runspace. There is no host or host UI. The debugger requires a host and host UI for debugging. + Çalışma Alanında hata ayıklanamıyor. Barındırıcı veya kullanıcı arabirimi yok. Hata ayıklayıcısı, hata ayıklama için bir barındırıcı ve kullanıcı arabirimi gerektirir. - More than one Runspace was found. Only one Runspace can be debugged at a time. + Birden fazla Runspace bulundu. Aynı anda yalnızca bir Runspace’te hata ayıklanabilir. - To end the debugging session type the 'Detach' command at the debugger prompt, or type 'Ctrl+C' otherwise. + Hata ayıklama oturumunu sonlandırmak için hata ayıklayıcı isteminde “Detach” komutunu yazın; aksi durumda “Ctrl+C” yazın. - Command or script completed. + Komut veya betik tamamlandı. - Debugging Runspace: {0} + Hata ayıklama Çalışma Alanı: {0} - Cannot set debug options on Runspace {0} because it is not in the Opened state. + Çalışma Alanı {0} için hata ayıklama seçenekleri ayarlanamıyor; çünkü Açıldı durumunda değil. - Failed to persist debug options for Process {0}. + İşlem {0} için hata ayıklama seçenekleri kalıcı hale getirilemedi. - No debugger was found for Runspace {0}. + {0} Runspace’i için hata ayıklayıcı bulunamadı. - No Runspace was found. + Hiçbir Çalışma Alanı bulunamadı. - Wait-Debugger called on line {0} in {1}. + Wait-Debugger {0} satırında {1} içinde çağrıldı. - A breakpoint associated with another runspace cannot be updated because there is no runspace with instance ID '{0}'. + Örnek kimliği “{0}” olan bir Runspace olmadığından, başka bir Runspace ile ilişkilendirilmiş kesme noktası güncelleştirilemiyor. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/tr/FormatAndOut_out_gridview.tr.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/tr/FormatAndOut_out_gridview.tr.resx index 72c3903542b..117e38cb63e 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/tr/FormatAndOut_out_gridview.tr.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/tr/FormatAndOut_out_gridview.tr.resx @@ -118,31 +118,31 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The data format is not supported by Out-GridView. + Veri biçimi Out-GridView tarafından desteklenmiyor. - Microsoft .NET Framework 4.5 was installed while one or more PowerShell sessions were running. To use the {0} cmdlet, close all PowerShell windows, and then open a new PowerShell window. + Microsoft .NET Framework 4.5, bir veya daha fazla windows PowerShell oturumu çalışırken yüklendi. {0} cmdlet'ini kullanmak için tüm windows PowerShell pencerelerini kapatın ve ardından yeni bir windows PowerShell penceresi açın. - Type + Tür Değer - Index + Dizin - A command named '{0}' was not found. + ‘{0}' adlı bir komut bulunamadı. - More than one command named '{0}' was found. Start '{1}' with no parameters, and then type '{0}' to filter the results. + ‘{0}' adlı birden fazla komut bulundu. Sonuçları filtrelemek için önce '{1}' ile hiçbir parametre olmadan başlatın, ardından '{0}' yazın. - Cannot write to console input buffer. + Konsola giriş arabelleğine yazılamıyor. - {0} should be smaller than {1}. + {0}, {1} değerinden küçük olmalıdır. {0} is the property "Height" {1} is the maximum allowed value for the height property. diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/tr/MatchStringStrings.tr.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/tr/MatchStringStrings.tr.resx index bc7da6005b7..d634e018c3d 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/tr/MatchStringStrings.tr.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/tr/MatchStringStrings.tr.resx @@ -118,18 +118,18 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot open the file because the current provider ({0}) cannot open files. + Geçerli sağlayıcı ({0}) dosyaları açamadığı için dosya açılamıyor. - The file {0} cannot be read: {1} + {0} dosyası okunamıyor: {1} - The option "Context" is not valid when searching results that are piped from Select-String output. + Sonuçları, Select-String çıktısından yönlendirilen aramalar için "Context" seçeneği geçerli değil. - The string {0} is not a valid regular expression: {1} + Dize {0} geçerli bir normal ifade değil: {1} - You must specify -Culture parameter only with -SimpleMatch parameter. + -Culture parametresini yalnızca -SimpleMatch parametresiyle birlikte belirtmelisiniz. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/tr/SelectObjectStrings.tr.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/tr/SelectObjectStrings.tr.resx index bdd62150f75..15bebead9d5 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/tr/SelectObjectStrings.tr.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/tr/SelectObjectStrings.tr.resx @@ -118,18 +118,18 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot rename multiple results. + Birden çok sonuç yeniden adlandırılamıyor. - Property "{0}" cannot be found. + "{0}" özelliği bulunamadı. - Multiple properties cannot be expanded. + Birden çok özellik genişletilemiyor. - The property cannot be processed because the property "{0}" already exists. + "{0}" özelliği zaten mevcut olduğu için özellik işlenemiyor. - A property is an empty script block and does not provide a name. + Özellik, boş bir betik bloğudur ve ad sağlamaz. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/ConvertHTMLStrings.zh-Hans.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/ConvertHTMLStrings.zh-Hans.resx index 865447e08b4..16b43edf37c 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/ConvertHTMLStrings.zh-Hans.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/ConvertHTMLStrings.zh-Hans.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Accepted meta properties are content-type, default-style, application-name, author, description, generator, keywords, x-ua-compatible, and viewport. The meta pair: {0} and {1} may not function correctly. + 接受的元属性包括 content-type、default-style、application-name、author、description、generator、keywords、x-ua-compatible 和 viewport。元对: {0} 和 {1} 可能无法正常工作。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/Debugger.zh-Hans.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/Debugger.zh-Hans.resx index a8e17de0d04..75f8cf95b0e 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/Debugger.zh-Hans.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/Debugger.zh-Hans.resx @@ -118,63 +118,63 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Line cannot be less than 1. + 行不能小于 1。 - There is no breakpoint with ID '{0}'. + 没有 ID 为 "{0}" 的断点。 文件“{0}”不存在。 - Cannot set breakpoint on file '{0}'; only *.ps1 and *.psm1 files are valid. + 无法在文件 "{0}" 上设置断点；只有 *.ps1 和 *.psm1 文件有效。 - Debugging is not supported on remote sessions. + 远程会话不支持调试。 - Cannot set breakpoint. The language mode for this session is incompatible with the system-wide language mode. + 无法设置断点。此会话的语言模式与系统范围的语言模式不兼容。 - Breakpoints cannot be set in the remote session because remote debugging is not supported by the current host. + 无法在远程会话中设置断点，因为当前主机不支持远程调试。 - You cannot debug the default host Runspace using this cmdlet. To debug the default Runspace use the normal debugging commands from the host. + 无法使用此 cmdlet 调试默认主机运行空间。若要调试默认运行空间，请使用主机中的常规调试命令。 - Cannot debug Runspace. The host has no debugger. Try debugging the Runspace inside the PowerShell console or with Visual Studio Code, both of which have built-in debuggers. + 无法调试运行空间。主机没有调试程序。请尝试在 PowerShell 控制台中或使用 Visual Studio Code 调试运行空间，两者都内置于调试程序中。 - Cannot debug Runspace. There is no host or host UI. The debugger requires a host and host UI for debugging. + 无法调试运行空间。没有主机或主机 UI。调试程序需要主机和主机 UI 才能进行调试。 - More than one Runspace was found. Only one Runspace can be debugged at a time. + 找到多个运行空间。一次只能调试一个运行空间。 - To end the debugging session type the 'Detach' command at the debugger prompt, or type 'Ctrl+C' otherwise. + 要结束调试会话，请在调试程序提示符处输入 "Detach" 命令；或者，请输入 "Ctrl+C"。 - Command or script completed. + 命令或脚本已完成。 - Debugging Runspace: {0} + 正在调试运行空间: {0} - Cannot set debug options on Runspace {0} because it is not in the Opened state. + 无法在运行空间 {0} 上设置调试选项，因为它不在“已打开”状态。 - Failed to persist debug options for Process {0}. + 未能保留进程 {0} 的调试选项。 - No debugger was found for Runspace {0}. + 未找到运行空间 {0} 的调试程序。 - No Runspace was found. + 未找到运行空间。 - Wait-Debugger called on line {0} in {1}. + 在 {1} 中的第 {0} 行调用了 Wait-Debugger。 - A breakpoint associated with another runspace cannot be updated because there is no runspace with instance ID '{0}'. + 无法更新与另一个运行空间关联的断点，因为不存在实例 ID 为 "{0}" 的运行空间。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/FormatAndOut_out_gridview.zh-Hans.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/FormatAndOut_out_gridview.zh-Hans.resx index fcc9f4542db..95d31aa0d3c 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/FormatAndOut_out_gridview.zh-Hans.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/FormatAndOut_out_gridview.zh-Hans.resx @@ -118,31 +118,31 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - The data format is not supported by Out-GridView. + Out-GridView 不支持这种数据格式。 - Microsoft .NET Framework 4.5 was installed while one or more PowerShell sessions were running. To use the {0} cmdlet, close all PowerShell windows, and then open a new PowerShell window. + 在运行一个或多个 PowerShell 会话时安装了 Microsoft .NET Framework 4.5。若要使用 {0} cmdlet，请关闭所有 PowerShell 窗口，然后打开一个新的 PowerShell 窗口。 - Type + 类型 值 - Index + 索引 - A command named '{0}' was not found. + 找不到名为 "{0}" 的命令。 - More than one command named '{0}' was found. Start '{1}' with no parameters, and then type '{0}' to filter the results. + 找到多个名为 "{0}" 的命令。请不使用参数启动“{1}”，然后键入“{0}”以筛选结果。 - Cannot write to console input buffer. + 无法写入控制台输入缓冲区。 - {0} should be smaller than {1}. + {0} 应小于 {1}。 {0} is the property "Height" {1} is the maximum allowed value for the height property. diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/GetMember.zh-Hans.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/GetMember.zh-Hans.resx index 5ad7b93b9c4..079c656a225 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/GetMember.zh-Hans.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/GetMember.zh-Hans.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - You must specify an object for the Get-Member cmdlet. + 必须为 Get-Member cmdlet 指定对象。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/GetUptimeStrings.zh-Hans.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/GetUptimeStrings.zh-Hans.resx index a9d0be9630e..fc5bec3cc99 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/GetUptimeStrings.zh-Hans.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/GetUptimeStrings.zh-Hans.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - "The platform is not supported (System.Diagnostics.Stopwatch.IsHighResolution is false)." + “该平台不受支持(System.Diagnostics.Stopwatch.IsHighResolution 为 false)。” \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/MatchStringStrings.zh-Hans.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/MatchStringStrings.zh-Hans.resx index bc7da6005b7..747a375910e 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/MatchStringStrings.zh-Hans.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/MatchStringStrings.zh-Hans.resx @@ -118,18 +118,18 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot open the file because the current provider ({0}) cannot open files. + 无法打开文件，因为当前提供程序({0})无法打开文件。 - The file {0} cannot be read: {1} + 无法读取文件“{0}”: {1} - The option "Context" is not valid when searching results that are piped from Select-String output. + 在搜索通过 Select-String 输出管道传递的结果时，选项 "Context" 无效。 - The string {0} is not a valid regular expression: {1} + 字符串 {0} 不是有效的正则表达式: {1} - You must specify -Culture parameter only with -SimpleMatch parameter. + 只能一起指定 -Culture 参数与 -SimpleMatch 参数。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/SelectObjectStrings.zh-Hans.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/SelectObjectStrings.zh-Hans.resx index bdd62150f75..c9febd4b374 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/SelectObjectStrings.zh-Hans.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/SelectObjectStrings.zh-Hans.resx @@ -118,18 +118,18 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot rename multiple results. + 无法重命名多个结果。 - Property "{0}" cannot be found. + 找不到属性“{0}”。 - Multiple properties cannot be expanded. + 多个属性无法展开。 - The property cannot be processed because the property "{0}" already exists. + 无法处理该属性，因为属性“{0}”已存在。 - A property is an empty script block and does not provide a name. + 有个属性是空脚本块，未提供名称。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/ConvertHTMLStrings.zh-Hant.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/ConvertHTMLStrings.zh-Hant.resx index 865447e08b4..b755d8bd964 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/ConvertHTMLStrings.zh-Hant.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/ConvertHTMLStrings.zh-Hant.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Accepted meta properties are content-type, default-style, application-name, author, description, generator, keywords, x-ua-compatible, and viewport. The meta pair: {0} and {1} may not function correctly. + 可接受的 meta 屬性為 content-type、default-style、application-name、author、description、generator、keywords、x-ua-compatible 和 viewport。meta 配對: {0} 和 {1} 可能無法正常運作。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/Debugger.zh-Hant.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/Debugger.zh-Hant.resx index 75884ad9a06..345df083bd5 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/Debugger.zh-Hant.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/Debugger.zh-Hant.resx @@ -118,63 +118,63 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Line cannot be less than 1. + 行不可小於 1。 - There is no breakpoint with ID '{0}'. + 找不到識別碼為 '{0}' 的中斷點。 檔案 '{0}' 不存在。 - Cannot set breakpoint on file '{0}'; only *.ps1 and *.psm1 files are valid. + 無法在檔案 '{0}' 上設定中斷點；只有 *.ps1 和 *.psm1 檔案有效。 - Debugging is not supported on remote sessions. + 遠端工作階段不支援偵錯。 - Cannot set breakpoint. The language mode for this session is incompatible with the system-wide language mode. + 無法設定中斷點。此工作階段的語言模式與全系統的語言模式不相容。 - Breakpoints cannot be set in the remote session because remote debugging is not supported by the current host. + 無法在遠端工作階段中設定中斷點，因為目前的主機不支援遠端偵錯。 - You cannot debug the default host Runspace using this cmdlet. To debug the default Runspace use the normal debugging commands from the host. + 您無法使用此 Cmdlet 對預設主機 Runspace 進行偵錯。若要偵錯預設 Runspace，請使用主機上的一般偵錯命令。 - Cannot debug Runspace. The host has no debugger. Try debugging the Runspace inside the PowerShell console or with Visual Studio Code, both of which have built-in debuggers. + 無法偵錯 Runspace。主機沒有偵錯工具。請在 PowerShell 主控台中，或使用 Visual Studio Code 偵錯 Runspace，這兩者都有內建偵錯工具。 - Cannot debug Runspace. There is no host or host UI. The debugger requires a host and host UI for debugging. + 無法偵錯 Runspace。沒有主機或主機 UI。偵錯需要主機和主機 UI。 - More than one Runspace was found. Only one Runspace can be debugged at a time. + 找到多個 Runspace。一次只能偵錯一個 Runspace。 - To end the debugging session type the 'Detach' command at the debugger prompt, or type 'Ctrl+C' otherwise. + 若要結束偵錯工作階段，請在偵錯工具提示字元中輸入 'Detach' 命令；否則請輸入 'Ctrl+C'。 - Command or script completed. + 命令或指令碼已完成。 - Debugging Runspace: {0} + 正在偵錯 Runspace: {0} - Cannot set debug options on Runspace {0} because it is not in the Opened state. + 無法在 Runspace {0} 上設定偵錯選項，因為它不在已開啟狀態。 - Failed to persist debug options for Process {0}. + 無法保存處理序 {0} 的偵錯選項。 - No debugger was found for Runspace {0}. + 找不到 Runspace {0} 的偵錯工具。 - No Runspace was found. + 找不到 Runspace。 - Wait-Debugger called on line {0} in {1}. + 在 {1} 的第 {0} 行呼叫了 Wait-Debugger。 - A breakpoint associated with another runspace cannot be updated because there is no runspace with instance ID '{0}'. + 無法更新與另一個 Runspace 關聯的中斷點，因為沒有執行個體識別碼為 '{0}' 的 Runspace。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/GetMember.zh-Hant.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/GetMember.zh-Hant.resx index 5ad7b93b9c4..3350931e653 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/GetMember.zh-Hant.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/GetMember.zh-Hant.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - You must specify an object for the Get-Member cmdlet. + 您必須為 Get-Member Cmdlet 指定物件。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/GetUptimeStrings.zh-Hant.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/GetUptimeStrings.zh-Hant.resx index a9d0be9630e..6edb73cee59 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/GetUptimeStrings.zh-Hant.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/GetUptimeStrings.zh-Hant.resx @@ -118,6 +118,6 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - "The platform is not supported (System.Diagnostics.Stopwatch.IsHighResolution is false)." + 「System.Diagnostics.Stopwatch.IsHighResolution 為 false，因此不支援此平台。」 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/MatchStringStrings.zh-Hant.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/MatchStringStrings.zh-Hant.resx index bc7da6005b7..a70683c71dd 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/MatchStringStrings.zh-Hant.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/MatchStringStrings.zh-Hant.resx @@ -118,18 +118,18 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot open the file because the current provider ({0}) cannot open files. + 無法開啟檔案，因為目前的提供者 ({0}) 無法開啟檔案。 - The file {0} cannot be read: {1} + 無法讀取檔案 {0}: {1} - The option "Context" is not valid when searching results that are piped from Select-String output. + 當結果是從 Select-String 輸出傳送而來時，選項「Context」無效。 - The string {0} is not a valid regular expression: {1} + 字串 {0} 不是有效的規則運算式: {1} - You must specify -Culture parameter only with -SimpleMatch parameter. + 您只能在使用 -SimpleMatch 參數時指定 -Culture 參數。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/NewObjectStrings.zh-Hant.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/NewObjectStrings.zh-Hant.resx index 4d5839056f7..d5695ac80e0 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/NewObjectStrings.zh-Hant.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/NewObjectStrings.zh-Hant.resx @@ -118,45 +118,45 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - A constructor was not found. Cannot find an appropriate constructor for type {0}. + 找不到建構函式。找不到類型 {0} 的適當建構函式。 - Cannot find type [{0}]: verify that the assembly containing this type is loaded. + 找不到類型 [{0}]：請確認已載入包含此類型的組件。 - Cannot load COM type {0}. + 無法載入 COM 類型 {0}。 - The object written to the pipeline is an instance of the type "{0}" from the component's primary interoperability assembly. If this type exposes different members than the IDispatch members, scripts that are written to work with this object might not work if the primary interoperability assembly is not installed. + 寫入管線的物件是元件主要互通性組件中類型 "{0}" 的執行個體。如果此類型公開的成員與 IDispatch 成員不同，而且未安裝主要互通性組件，為了搭配這個物件而撰寫的指令碼可能無法運作。 - The member "{1}" was not found for the specified {2} object. + 找不到指定的 {2} 物件的成員 "{1}"。 - The value supplied is not valid, or the property is read-only. Change the value, and then try again. + 所提供的值無效，或該屬性是唯讀的。請變更值，然後再試一次。 - Creating instances of attribute and delegated Windows RT types is not supported. + 不支援建立屬性和委派 Windows RT 類型的執行個體。 - Cannot create instances of the ByRef-like type "{0}". ByRef-like types are not supported in PowerShell. + 無法建立類似 ByRef 類型 "{0}" 的執行個體。PowerShell 不支援 ByRef 類型。 - Cannot create type. Only core types are supported in this language mode. + 無法建立類型。此語言模式只支援核心類型。 - Cannot create type. Only core types are supported in {0} language mode on a policy locked down machine. + 無法建立類型。在原則鎖定的電腦上，{0} 語言模式只支援核心類型。 - New-Object Cmdlet Type Creation + New-Object Cmdlet 類型建立 - The type '{0}' will not be created in ConstrainedLanguage mode. + 在 ConstrainedLanguage 模式中，不會建立類型 '{0}'。 - New-Object Cmdlet COM Object Creation + New-Object Cmdlet COM 物件建立 - The COM object '{0}' will not be created in ConstrainedLanguage mode. + 在 ConstrainedLanguage 模式中，不會建立 COM 物件 '{0}'。 \ No newline at end of file From d7a535431cc81689783d9f45e60d2d7b893e1a35 Mon Sep 17 00:00:00 2001 From: olprod Date: Fri, 14 Aug 2026 12:26:17 -0700 Subject: [PATCH 7/7] Localized file check-in by OneLocBuild Task: Build definition ID 13420: Build ID 2677113 --- .../resources/ru/WebCmdletStrings.ru.resx | 86 +++++++++---------- .../resources/tr/WebCmdletStrings.tr.resx | 86 +++++++++---------- .../zh-Hans/WebCmdletStrings.zh-Hans.resx | 86 +++++++++---------- .../zh-Hant/WebCmdletStrings.zh-Hant.resx | 86 +++++++++---------- .../resources/cs/TranscriptStrings.cs.resx | 16 ++-- .../CommandLineParameterParserStrings.de.resx | 76 ++++++++-------- .../resources/de/TranscriptStrings.de.resx | 16 ++-- .../CommandLineParameterParserStrings.es.resx | 76 ++++++++-------- .../resources/es/TranscriptStrings.es.resx | 16 ++-- .../CommandLineParameterParserStrings.fr.resx | 76 ++++++++-------- .../resources/fr/TranscriptStrings.fr.resx | 16 ++-- .../CommandLineParameterParserStrings.ja.resx | 76 ++++++++-------- .../resources/ja/ConsoleHostStrings.ja.resx | 44 +++++----- .../CommandLineParameterParserStrings.pl.resx | 76 ++++++++-------- .../CommandLineParameterParserStrings.ru.resx | 76 ++++++++-------- .../CommandLineParameterParserStrings.tr.resx | 76 ++++++++-------- .../resources/tr/ConsoleHostStrings.tr.resx | 44 +++++----- .../resources/tr/TranscriptStrings.tr.resx | 16 ++-- ...andLineParameterParserStrings.zh-Hans.resx | 76 ++++++++-------- .../zh-Hans/ConsoleHostStrings.zh-Hans.resx | 44 +++++----- .../zh-Hans/TranscriptStrings.zh-Hans.resx | 16 ++-- ...andLineParameterParserStrings.zh-Hant.resx | 76 ++++++++-------- .../zh-Hant/ConsoleHostStrings.zh-Hant.resx | 44 +++++----- .../zh-Hant/TranscriptStrings.zh-Hant.resx | 16 ++-- .../resources/de/UtilsStrings.de.resx | 26 +++--- .../resources/es/UtilsStrings.es.resx | 26 +++--- .../resources/fr/UtilsStrings.fr.resx | 26 +++--- .../resources/pl/UtilsStrings.pl.resx | 26 +++--- .../resources/tr/UtilsStrings.tr.resx | 26 +++--- 29 files changed, 723 insertions(+), 723 deletions(-) diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/ru/WebCmdletStrings.ru.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/ru/WebCmdletStrings.ru.resx index 80c8a790ac3..dae269a3900 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/ru/WebCmdletStrings.ru.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/ru/WebCmdletStrings.ru.resx @@ -121,132 +121,132 @@ Доступ к пути "{0}" запрещен. - The cmdlet cannot protect plain text secrets sent over unencrypted connections. To suppress this warning and send plain text secrets over unencrypted networks, reissue the command specifying the AllowUnencryptedAuthentication parameter. + Этот командлет не может обеспечить защиту секретов в виде обычного текста по незашифрованным сетям. Чтобы отключить это предупреждение и отправлять секреты в виде обычного текста по незашифрованным сетям, повторно выполните команду, указав параметр AllowUnencryptedAuthentication. - The cmdlet cannot run because the following conflicting parameters are specified: Authentication and UseDefaultCredentials. Authentication does not support Default Credentials. Specify either Authentication or UseDefaultCredentials, then retry. + Командлет не может быть запущен, поскольку указаны следующие конфликтующие параметры: Authentication и UseDefaultCredentials. Authentication не поддерживает учетные данные по умолчанию. Укажите Authentication или UseDefaultCredentials, затем повторите попытку. - The cmdlet cannot run because the following parameter is not specified: Credential. The supplied Authentication type requires a Credential. Specify Credential, then retry. + Не удается выполнить командлет, так как не указан следующий параметр: Credential. Для указанного типа проверки подлинности требуется параметр Credential. Укажите параметр Credential, затем повторите попытку. - The cmdlet cannot run because the following parameter is not specified: Token. The supplied Authentication type requires a Token. Specify Token, then retry. + Не удается выполнить командлет, так как не указан следующий параметр: Token. Для указанного типа проверки подлинности требуется параметр Token. Укажите параметр Token, затем повторите попытку. - The cmdlet cannot run because the following conflicting parameters are specified: Credential and Token. Specify either Credential or Token, then retry. + Командлет не может быть запущен, поскольку указаны следующие конфликтующие параметры: Credential и Token. Укажите либо Credential, либо Token, затем повторите попытку. - The cmdlet cannot run because the following conflicting parameters are specified: Body and InFile. Specify either Body or Infile, then retry. + Не удается выполнить командлет, так как указаны следующие конфликтующие параметры: Body и InFile. Укажите либо Body, либо InFile, затем повторите попытку. - The cmdlet cannot run because the following conflicting parameters are specified: Body and Form. Specify either Body or Form, then retry. + Не удается выполнить командлет, так как указаны следующие конфликтующие параметры: Body и Form. Укажите либо Body, либо Form, затем повторите попытку. - The cmdlet cannot run because the following conflicting parameters are specified: InFile and Form. Specify either InFile or Form, then retry. + Не удается выполнить командлет, так как указаны следующие конфликтующие параметры: InFile и Form. Укажите либо InFile, либо Form, затем повторите попытку. - The cmdlet cannot run because the -ContentType parameter is not a valid Content-Type header. Specify a valid Content-Type for -ContentType, then retry. To suppress header validation, supply the -SkipHeaderValidation parameter. + Не удается запустить командлет, так как параметр -ContentType не является допустимым заголовком Content-Type. Укажите допустимый Content-Type для -ContentType, затем повторите попытку. Чтобы отключить проверку заголовков, укажите параметр -SkipHeaderValidation. - The cmdlet cannot run because the following conflicting parameters are specified: Credential and UseDefaultCredentials. Specify either Credential or UseDefaultCredentials, then retry. + Командлет не может быть запущен, поскольку указаны следующие конфликтующие параметры: Credential и UseDefaultCredentials. Укажите Credential или UseDefaultCredentials, затем повторите попытку. - Path '{0}' resolves to a directory. Specify a path including a file name, and then retry the command. + Путь {0} указывает на каталог. Укажите путь с именем файла, затем повторите команду. - The provided JSON includes a property whose name is an empty string, this is only supported using the -AsHashTable switch. + Предоставленный JSON включает свойство с пустым именем. Это поддерживается только при использовании переключателя -AsHashTable. - Cannot convert the JSON string because a dictionary that was converted from the string contains the duplicated key '{0}'. + Не удается преобразовать строку JSON, так как словарь, преобразованный из этой строки, содержит повторяющийся ключ {0}. - The response content cannot be parsed because the Internet Explorer engine is not available, or Internet Explorer's first-launch configuration is not complete. Specify the UseBasicParsing parameter and try again. + Не удалось проанализировать содержимое ответа, так как движок Internet Explorer недоступен или не завершена первоначальная настройка Internet Explorer при первом запуске. Укажите параметр UseBasicParsing и повторите попытку. - Cannot follow an insecure redirection by default. Reissue the command specifying the -AllowInsecureRedirect switch. + По умолчанию переход по небезопасному перенаправлению не выполняется. Повторно выполните команду, указав переключатель -AllowInsecureRedirect. - Cannot convert the JSON string because it contains keys with different casing. Please use the -AsHashTable switch instead. The key that was attempted to be added to the existing key '{0}' was '{1}'. + Не удается преобразовать строку JSON, так как она содержит ключи с разным регистром. Используйте переключатель -AsHashTable. Ключ, который пытались добавить к существующему ключу {0}, был {1}. - The maximum redirection count has been exceeded. To increase the number of redirections allowed, supply a higher value to the -MaximumRedirection parameter. + Превышено максимальное число перенаправлений. Чтобы увеличить количество разрешенных перенаправлений, укажите большее значение для параметра -MaximumRedirection. - Path '{0}' can be resolved to multiple paths. + Путь {0} может быть разрешен в несколько путей. - The type '{0}' is not supported for serialization or deserialization of a dictionary. Keys must be strings. + Тип {0} не поддерживается для сериализации или десериализации словаря. Ключи должны быть строками. - Path '{0}' cannot be resolved to a file. + Не удается разрешить путь {0} к файлу. - Path '{0}' is not a file system path. Please specify the path to a file in the file system. + Путь {0} не является путем файловой системы. Укажите путь к файлу в файловой системе. - The cmdlet cannot run because the following parameter is missing: OutFile. Provide a valid OutFile parameter value when using the {0} parameter, then retry. + Не удается выполнить командлет, так как не указан следующий параметр: OutFile. Укажите допустимое значение параметра OutFile при использовании параметра {0}, затем повторите попытку. - The file will not be re-downloaded because the remote file is the same size as the OutFile: {0} + Файл не будет загружен повторно, так как размер удаленного файла совпадает с размером файла OutFile: {0} - The cmdlet cannot run because the following conflicting parameters are specified: ProxyCredential and ProxyUseDefaultCredentials. Specify either ProxyCredential or ProxyUseDefaultCredentials, then retry. + Командлет не может быть запущен, поскольку указаны следующие конфликтующие параметры: ProxyCredential и ProxyUseDefaultCredentials. Укажите либо ProxyCredential, либо ProxyUseDefaultCredentials, затем повторите попытку. - The cmdlet cannot run because the following parameter is missing: Proxy. Provide a valid proxy URI for the Proxy parameter when using the ProxyCredential or ProxyUseDefaultCredentials parameters, then retry. + Не удается выполнить командлет, так как не указан следующий параметр: Proxy. Укажите допустимый URI прокси-сервера для параметра Proxy при использовании параметров ProxyCredential или ProxyUseDefaultCredentials, затем повторите попытку. - Reading web response stream completed. Bytes downloaded: {0} + Чтение потока веб-ответа завершено. Скачано байт: {0} - Reading web response stream + Чтение потока веб-ответа - Downloaded: {0} of {1} + Загружено: {0} из {1} - The Resume switch can only be used if OutFile targets a file but it resolves to a directory: {0}. + Параметр Resume можно использовать только в том случае, если OutFile указывает на файл, но фактически ссылается на каталог: {0}. - The cmdlet cannot run because the following conflicting parameters are specified: Session and SessionVariable. Specify either Session or SessionVariable, then retry. + Не удается выполнить командлет, так как указаны следующие конфликтующие параметры: Session и SessionVariable. Укажите либо Session, либо SessionVariable, затем повторите попытку. - Unable to retrieve certificates because the thumbprint is not valid. Verify the thumbprint and retry. + Не удалось получить сертификаты, так как отпечаток недействителен. Проверьте отпечаток и повторите попытку. - Web request completed. (Number of bytes processed: {0}) + Веб-запрос выполнен. (Число обработанных байт: {0}) - Web request cancelled. (Number of bytes processed: {0}) + Веб-запрос отменен. (Число обработанных байт: {0}) - Web request status + Состояние веб-запроса - Downloaded: {0} of {1} + Загружено: {0} из {1} - Conversion from JSON failed with error: {0} + Не удалось преобразовать JSON. Ошибка: {0} - Response status code does not indicate success: {0} ({1}). + Код состояния отклика не указывает на успешное выполнение: {0} ({1}). - Following rel link {0} + Переход по rel-ссылке {0} - The remote server indicated it could not resume downloading. The local file will be overwritten. + Удаленный сервер сообщил, что не может возобновить загрузку. Локальный файл будет перезаписан. - Received HTTP/{0} response of content type {1} of unknown size + Получен ответ HTTP/{0} с типом содержимого {1} неизвестного размера - Retrying after interval of {0} seconds. Status code for previous attempt: {1} + Повторная попытка через интервал в {0} секунд. Код состояния предыдущей попытки: {1} - Resulting JSON is truncated as serialization has exceeded the set depth of {0}. + Результирующий JSON усечен, так как при сериализации была превышена заданная глубина в {0}. - The WebSession properties were changed between requests forcing all HTTP connections in the session to be recreated. + Свойства WebSession были изменены в промежутке между запросами, что привело к необходимости повторного создания всех HTTP-соединений в рамках сеанса. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/tr/WebCmdletStrings.tr.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/tr/WebCmdletStrings.tr.resx index ef580bbc142..23f7018a811 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/tr/WebCmdletStrings.tr.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/tr/WebCmdletStrings.tr.resx @@ -121,132 +121,132 @@ '{0}' yoluna erişim reddedildi. - The cmdlet cannot protect plain text secrets sent over unencrypted connections. To suppress this warning and send plain text secrets over unencrypted networks, reissue the command specifying the AllowUnencryptedAuthentication parameter. + Cmdlet, düz metin gizli bilgileri şifrelenmemiş bağlantılar üzerinden koruyamaz. Düz metin gizli bilgileri şifrelenmemiş ağlar üzerinden göndermeye yönelik bu uyarıyı durdurmak için, AllowUnencryptedAuthentication parametresini belirterek komutu yeniden verin. - The cmdlet cannot run because the following conflicting parameters are specified: Authentication and UseDefaultCredentials. Authentication does not support Default Credentials. Specify either Authentication or UseDefaultCredentials, then retry. + Çakışan aşağıdaki parametreler belirtildiği için cmdlet çalıştırılamıyor: Authentication ve UseDefaultCredentials. Authentication, Default Credentials'ı desteklemez. Authentication veya UseDefaultCredentials belirtin, ardından yeniden deneyin. - The cmdlet cannot run because the following parameter is not specified: Credential. The supplied Authentication type requires a Credential. Specify Credential, then retry. + Aşağıdaki parametre belirtilmediği için cmdlet çalıştırılamıyor: Credential. Sağlanan Authentication türü bir Credential gerektirir. Önce Kimlik Bilgisi belirtin, ardından yeniden deneyin. - The cmdlet cannot run because the following parameter is not specified: Token. The supplied Authentication type requires a Token. Specify Token, then retry. + Aşağıdaki parametre belirtilmediği için cmdlet çalıştırılamıyor: Token. Belirtilen Authentication türü bir Token gerektirir. Token belirtin, ardından yeniden deneyin. - The cmdlet cannot run because the following conflicting parameters are specified: Credential and Token. Specify either Credential or Token, then retry. + Çakışan aşağıdaki parametreler belirtildiği için cmdlet çalıştırılamıyor: Kimlik bilgisi ve Belirteç. Kimlik Bilgisi veya Belirteç belirtin, ardından yeniden deneyin. - The cmdlet cannot run because the following conflicting parameters are specified: Body and InFile. Specify either Body or Infile, then retry. + Çakışan aşağıdaki parametreler belirtildiği için cmdlet çalıştırılamıyor: Body ve InFile. Gövde veya Infile belirtin, ardından yeniden deneyin. - The cmdlet cannot run because the following conflicting parameters are specified: Body and Form. Specify either Body or Form, then retry. + Çakışan aşağıdaki parametreler belirtildiği için cmdlet çalıştırılamıyor: Body ve Form. Body veya Form belirtin, ardından yeniden deneyin. - The cmdlet cannot run because the following conflicting parameters are specified: InFile and Form. Specify either InFile or Form, then retry. + Cmdlet, aşağıdaki çakışan parametreler belirtildiği için çalıştırılamıyor: InFile ve Form. InFile veya Form belirtin, ardından yeniden deneyin. - The cmdlet cannot run because the -ContentType parameter is not a valid Content-Type header. Specify a valid Content-Type for -ContentType, then retry. To suppress header validation, supply the -SkipHeaderValidation parameter. + Cmdlet, -ContentType parametresi geçerli bir Content-Type üst bilgi olmadığı için çalıştırılamıyor. -ContentType için geçerli bir Content-Type belirtin, ardından yeniden deneyin. Üst bilgi doğrulamasını durdurmak için -SkipHeaderValidation parametresini sağlayın. - The cmdlet cannot run because the following conflicting parameters are specified: Credential and UseDefaultCredentials. Specify either Credential or UseDefaultCredentials, then retry. + Cmdlet, aşağıdaki çakışan parametreler belirtildiği için çalıştırılamıyor: Credential ve UseDefaultCredentials. Credential veya UseDefaultCredentials belirtin, ardından yeniden deneyin. - Path '{0}' resolves to a directory. Specify a path including a file name, and then retry the command. + Yol '{0}' bir dizine çözümleniyor. Dosya adı içeren bir yol belirtin ve ardından komutu yeniden deneyin. - The provided JSON includes a property whose name is an empty string, this is only supported using the -AsHashTable switch. + Sağlanan JSON, adı boş bir dize olan bir özellik içeriyor; bu yalnızca -AsHashTable anahtarı kullanılarak desteklenir. - Cannot convert the JSON string because a dictionary that was converted from the string contains the duplicated key '{0}'. + JSON dizesinden dönüştürülen sözlük, yinelenen '{0}' anahtarını içerdiği için JSON dizesi dönüştürülemiyor. - The response content cannot be parsed because the Internet Explorer engine is not available, or Internet Explorer's first-launch configuration is not complete. Specify the UseBasicParsing parameter and try again. + Yanıt içeriği, Internet Explorer altyapısı kullanılamadığı veya Internet Explorer'ın ilk çalıştırma yapılandırması tamamlanmadığı için ayrıştırılamıyor. UseBasicParsing parametresini belirtin ve yeniden deneyin. - Cannot follow an insecure redirection by default. Reissue the command specifying the -AllowInsecureRedirect switch. + Varsayılan olarak güvensiz bir yeniden yönlendirme izlenemez. -AllowInsecureRedirect anahtarını belirterek komutu yeniden verin. - Cannot convert the JSON string because it contains keys with different casing. Please use the -AsHashTable switch instead. The key that was attempted to be added to the existing key '{0}' was '{1}'. + JSON dizesi, farklı büyük/küçük harf kullanımına sahip anahtarlar içerdiği için dönüştürülemiyor. Lütfen bunun yerine -AsHashTable anahtarını kullanın. Var olan anahtar '{0}' içine eklenmeye çalışılan anahtar '{1}' idi. - The maximum redirection count has been exceeded. To increase the number of redirections allowed, supply a higher value to the -MaximumRedirection parameter. + Maksimum yönlendirme sayısı aşıldı. İzin verilen yönlendirme sayısını artırmak için, -MaximumRedirection parametresine daha yüksek bir değer sağlayın. - Path '{0}' can be resolved to multiple paths. + ‘{0}' yolu birden çok yola çözümlenebilir. - The type '{0}' is not supported for serialization or deserialization of a dictionary. Keys must be strings. + ‘{0}' türü, bir sözlüğün serileştirilmesi veya seri durumundan çıkarılması için desteklenmiyor. Anahtarlar dize olmalıdır. - Path '{0}' cannot be resolved to a file. + ‘{0}' yolu bir dosyaya çözümlenemiyor. - Path '{0}' is not a file system path. Please specify the path to a file in the file system. + Yol '{0}' bir dosya sistemi yolu değil. Lütfen dosya sistemindeki bir dosyanın yolunu belirtin. - The cmdlet cannot run because the following parameter is missing: OutFile. Provide a valid OutFile parameter value when using the {0} parameter, then retry. + Cmdlet, aşağıdaki parametre belirtilmediği için çalıştırılamıyor: OutFile. {0} parametresini kullanırken geçerli bir OutFile parametre değeri belirtin, ardından yeniden deneyin. - The file will not be re-downloaded because the remote file is the same size as the OutFile: {0} + Uzak dosya, OutFile ile aynı boyutta olduğu için dosya yeniden indirilmeyecek: {0} - The cmdlet cannot run because the following conflicting parameters are specified: ProxyCredential and ProxyUseDefaultCredentials. Specify either ProxyCredential or ProxyUseDefaultCredentials, then retry. + Çakışan aşağıdaki parametreler belirtildiği için cmdlet çalıştırılamıyor: ProxyCredential ve ProxyUseDefaultCredentials. ProxyCredential veya ProxyUseDefaultCredentials belirtin, ardından yeniden deneyin. - The cmdlet cannot run because the following parameter is missing: Proxy. Provide a valid proxy URI for the Proxy parameter when using the ProxyCredential or ProxyUseDefaultCredentials parameters, then retry. + Aşağıdaki parametre belirtilmediği için cmdlet çalıştırılamıyor: Proxy. ProxyCredential veya proxyusedefaultcredentials parametrelerini kullanırken proxy parametresi için geçerli bir proxy URI'si sağlayın, ardından yeniden deneyin. - Reading web response stream completed. Bytes downloaded: {0} + Web yanıt akışının okunması tamamlandı. İndirilen bayt miktarı: {0} - Reading web response stream + Web yanıt akışı okunuyor - Downloaded: {0} of {1} + İndirilen: {0} / {1} - The Resume switch can only be used if OutFile targets a file but it resolves to a directory: {0}. + Sürdürme anahtarı yalnızca OutFile bir dosyayı hedefliyorsa kullanılabilir, ancak bir dizine çözümleniyor: {0}. - The cmdlet cannot run because the following conflicting parameters are specified: Session and SessionVariable. Specify either Session or SessionVariable, then retry. + Cmdlet, aşağıdaki çakışan parametreler belirtildiği için çalıştırılamıyor: Session ve SessionVariable. Session veya SessionVariable belirtin, ardından yeniden deneyin. - Unable to retrieve certificates because the thumbprint is not valid. Verify the thumbprint and retry. + Sertifikalar alınamıyor çünkü parmak izi geçersiz. Parmak izini doğrulayın ve yeniden deneyin. - Web request completed. (Number of bytes processed: {0}) + Web isteği tamamlandı. (İşlenen bayt sayısı: {0}) - Web request cancelled. (Number of bytes processed: {0}) + Web isteği iptal edildi. (İşlenen bayt sayısı: {0}) - Web request status + Web isteği durumu - Downloaded: {0} of {1} + İndirilen: {0} / {1} - Conversion from JSON failed with error: {0} + JSON'dan dönüştürme şu hatayla başarısız oldu: {0} - Response status code does not indicate success: {0} ({1}). + Yanıt durum kodu, başarı durumu göstermiyor: {0} ({1}). - Following rel link {0} + İlgili bağlantıyı {0} izleyen - The remote server indicated it could not resume downloading. The local file will be overwritten. + Uzak sunucu, indirmeyi sürdüremeyeceğini belirtti. Yerel dosyanın üzerine yazılacak. - Received HTTP/{0} response of content type {1} of unknown size + HTTP/{0} türünde, boyutu bilinmeyen {1} içerik türüne sahip yanıt alındı - Retrying after interval of {0} seconds. Status code for previous attempt: {1} + {0} saniyelik aralıktan sonra yeniden deneniyor. Önceki denemenin durum kodu: {1} - Resulting JSON is truncated as serialization has exceeded the set depth of {0}. + Serileştirme, {0} olarak ayarlanan derinliği aştığı için ortaya çıkan JSON kesildi. - The WebSession properties were changed between requests forcing all HTTP connections in the session to be recreated. + WebSession özellikleri istekler arasında değiştirildiğinden, oturumdaki tüm HTTP bağlantıları yeniden oluşturuluyor. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/WebCmdletStrings.zh-Hans.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/WebCmdletStrings.zh-Hans.resx index d6c7a8b3e38..31df09b93b1 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/WebCmdletStrings.zh-Hans.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hans/WebCmdletStrings.zh-Hans.resx @@ -121,132 +121,132 @@ 对路径“{0}”的访问被拒绝。 - The cmdlet cannot protect plain text secrets sent over unencrypted connections. To suppress this warning and send plain text secrets over unencrypted networks, reissue the command specifying the AllowUnencryptedAuthentication parameter. + 该 cmdlet 无法保护通过未加密连接发送的纯文本机密。若要取消显示此警告并通过未加密的网络发送纯文本机密，请重新发出指定 AllowUnencryptedAuthentication 参数的命令。 - The cmdlet cannot run because the following conflicting parameters are specified: Authentication and UseDefaultCredentials. Authentication does not support Default Credentials. Specify either Authentication or UseDefaultCredentials, then retry. + 无法运行 cmdlet，因为指定了以下冲突参数: Authentication 和 UseDefaultCredentials。身份验证不支持默认凭据。请指定 Authentication 或 UseDefaultCredentials，然后重试。 - The cmdlet cannot run because the following parameter is not specified: Credential. The supplied Authentication type requires a Credential. Specify Credential, then retry. + 该 cmdlet 无法运行，因为未指定以下参数: Credential。所提供的 Authentication 类型需要 Credential。指定凭据，然后重试。 - The cmdlet cannot run because the following parameter is not specified: Token. The supplied Authentication type requires a Token. Specify Token, then retry. + 该 cmdlet 无法运行，因为未指定以下参数: Token。所提供的 Authentication 类型需要 Token。请指定 Token，然后重试。 - The cmdlet cannot run because the following conflicting parameters are specified: Credential and Token. Specify either Credential or Token, then retry. + 无法运行 cmdlet，因为指定了以下冲突参数: Credential 和 Token。请指定 Credential 或 Token，然后重试。 - The cmdlet cannot run because the following conflicting parameters are specified: Body and InFile. Specify either Body or Infile, then retry. + 该 cmdlet 无法运行，因为指定了以下冲突参数: Body 和 InFile。请指定 Body 或 InFile，然后重试。 - The cmdlet cannot run because the following conflicting parameters are specified: Body and Form. Specify either Body or Form, then retry. + 该 cmdlet 无法运行，因为指定了以下冲突参数: Body 和 Form。请指定 Body 或 Form，然后重试。 - The cmdlet cannot run because the following conflicting parameters are specified: InFile and Form. Specify either InFile or Form, then retry. + 该 cmdlet 无法运行，因为指定了以下冲突参数: InFile 和 Form。请指定 InFile 或 Form，然后重试。 - The cmdlet cannot run because the -ContentType parameter is not a valid Content-Type header. Specify a valid Content-Type for -ContentType, then retry. To suppress header validation, supply the -SkipHeaderValidation parameter. + 该 cmdlet 无法运行，因为 -ContentType 参数不是有效的 Content-Type 标头。为 -ContentType 指定有效的 Content-Type，然后重试。若要取消标头验证，请提供 -SkipHeaderValidation 参数。 - The cmdlet cannot run because the following conflicting parameters are specified: Credential and UseDefaultCredentials. Specify either Credential or UseDefaultCredentials, then retry. + 无法运行 cmdlet，因为指定了以下冲突参数: Credential 和 UseDefaultCredentials。请指定 Credential 或 UseDefaultCredentials，然后重试。 - Path '{0}' resolves to a directory. Specify a path including a file name, and then retry the command. + 路径 '{0}' 解析为目录。指定包含文件名的路径，然后重试该命令。 - The provided JSON includes a property whose name is an empty string, this is only supported using the -AsHashTable switch. + 提供的 JSON 包括一个名称为空字符串的属性，仅支持使用 -AsHashTable 开关。 - Cannot convert the JSON string because a dictionary that was converted from the string contains the duplicated key '{0}'. + 无法转换 JSON 字符串，因为从该字符串转换的字典包含重复键 '{0}'。 - The response content cannot be parsed because the Internet Explorer engine is not available, or Internet Explorer's first-launch configuration is not complete. Specify the UseBasicParsing parameter and try again. + 无法解析响应内容，因为 Internet Explorer 引擎不可用，或者 Internet Explorer 的首次启动配置未完成。指定 UseBasicParsing 参数，然后重试。 - Cannot follow an insecure redirection by default. Reissue the command specifying the -AllowInsecureRedirect switch. + 默认情况下，不能跟随不安全的重定向。重新发出指定 -AllowInsecureRedirect 开关的命令。 - Cannot convert the JSON string because it contains keys with different casing. Please use the -AsHashTable switch instead. The key that was attempted to be added to the existing key '{0}' was '{1}'. + 无法转换 JSON 字符串，因为它包含具有不同大小写的键。请改用 -AsHashTable 开关。尝试添加到现有键 '{0}' 的键是 '{1}'。 - The maximum redirection count has been exceeded. To increase the number of redirections allowed, supply a higher value to the -MaximumRedirection parameter. + 已超过最大重定向计数。若要增加允许的重定向数，请为 -MaximumRedirection 参数提供更高的值。 - Path '{0}' can be resolved to multiple paths. + 路径 '{0}' 可解析为多个路径。 - The type '{0}' is not supported for serialization or deserialization of a dictionary. Keys must be strings. + 类型 '{0}' 不支持字典的序列化或反序列化。键必须是字符串。 - Path '{0}' cannot be resolved to a file. + 路径 '{0}' 无法解析为文件。 - Path '{0}' is not a file system path. Please specify the path to a file in the file system. + 路径 '{0}' 不是文件系统路径。请指定文件系统中文件的路径。 - The cmdlet cannot run because the following parameter is missing: OutFile. Provide a valid OutFile parameter value when using the {0} parameter, then retry. + 该 cmdlet 无法运行，因为缺少以下参数: OutFile。使用 {0} 参数时提供有效的 OutFile 参数值，然后重试。 - The file will not be re-downloaded because the remote file is the same size as the OutFile: {0} + 不会重新下载该文件，因为远程文件与 OutFile 大小相同: {0} - The cmdlet cannot run because the following conflicting parameters are specified: ProxyCredential and ProxyUseDefaultCredentials. Specify either ProxyCredential or ProxyUseDefaultCredentials, then retry. + 该 cmdlet 无法运行，因为指定了以下冲突参数: ProxyCredential 和 ProxyUseDefaultCredentials。指定 ProxyCredential 或 ProxyUseDefaultCredentials，然后重试。 - The cmdlet cannot run because the following parameter is missing: Proxy. Provide a valid proxy URI for the Proxy parameter when using the ProxyCredential or ProxyUseDefaultCredentials parameters, then retry. + 无法运行 cmdlet，因为缺少以下参数: Proxy。使用 ProxyCredential 或 ProxyUseDefaultCredentials 参数时，请为 Proxy 参数提供有效的代理 URI，然后重试。 - Reading web response stream completed. Bytes downloaded: {0} + 已完成读取 Web 响应流。已下载字节数: {0} - Reading web response stream + 正在读取 Web 响应流 - Downloaded: {0} of {1} + 已下载: {0}/{1} - The Resume switch can only be used if OutFile targets a file but it resolves to a directory: {0}. + 只有当 OutFile 指向文件但解析结果为目录时，才能使用 Resume 开关: {0}。 - The cmdlet cannot run because the following conflicting parameters are specified: Session and SessionVariable. Specify either Session or SessionVariable, then retry. + 该 cmdlet 无法运行，因为指定了以下冲突参数: Session 和 SessionVariable。请指定 Session 或 SessionVariable，然后重试。 - Unable to retrieve certificates because the thumbprint is not valid. Verify the thumbprint and retry. + 无法检索证书，因为指纹无效。验证指纹并重试。 - Web request completed. (Number of bytes processed: {0}) + Web 请求已完成。(已处理的字节数: {0}) - Web request cancelled. (Number of bytes processed: {0}) + Web 请求已取消。(已处理的字节数: {0}) - Web request status + Web 请求状态 - Downloaded: {0} of {1} + 已下载: {0}/{1} - Conversion from JSON failed with error: {0} + 从 JSON 转换失败，出现错误: {0} - Response status code does not indicate success: {0} ({1}). + 响应状态代码未指示成功: {0} ({1})。 - Following rel link {0} + 正在跟踪 rel 链接 {0} - The remote server indicated it could not resume downloading. The local file will be overwritten. + 远程服务器指示无法继续下载。将覆盖本地文件。 - Received HTTP/{0} response of content type {1} of unknown size + 收到了未知大小的内容类型 {1} 的 HTTP/ {0} 响应 - Retrying after interval of {0} seconds. Status code for previous attempt: {1} + 间隔 {0} 秒后重试。上次尝试的状态代码: {1} - Resulting JSON is truncated as serialization has exceeded the set depth of {0}. + 生成的 JSON 已截断，因为序列化已超过设置的深度 {0}。 - The WebSession properties were changed between requests forcing all HTTP connections in the session to be recreated. + 在强制重新创建会话中的所有 HTTP 连接的请求之间更改了 WebSession 属性。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/WebCmdletStrings.zh-Hant.resx b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/WebCmdletStrings.zh-Hant.resx index 80f45281c7e..1a24cd4f9f2 100644 --- a/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/WebCmdletStrings.zh-Hant.resx +++ b/src/Microsoft.PowerShell.Commands.Utility/resources/zh-Hant/WebCmdletStrings.zh-Hant.resx @@ -121,132 +121,132 @@ 存取路徑 '{0}' 遭拒。 - The cmdlet cannot protect plain text secrets sent over unencrypted connections. To suppress this warning and send plain text secrets over unencrypted networks, reissue the command specifying the AllowUnencryptedAuthentication parameter. + Cmdlet 無法保護透過未加密連線傳送的純文字密碼。若要隱藏此警告並透過未加密的網路傳送純文字密碼，請重新執行命令，並指定 AllowUnencryptedAuthentication 參數。 - The cmdlet cannot run because the following conflicting parameters are specified: Authentication and UseDefaultCredentials. Authentication does not support Default Credentials. Specify either Authentication or UseDefaultCredentials, then retry. + 無法執行 Cmdlet，因為指定了下列衝突的參數: Authentication 和 UseDefaultCredentials。Authentication 不支援預設認證。請指定 Authentication 或 UseDefaultCredentials，然後重試。 - The cmdlet cannot run because the following parameter is not specified: Credential. The supplied Authentication type requires a Credential. Specify Credential, then retry. + 無法執行 Cmdlet，因為未指定下列參數: Credential。提供的驗證類型需要 Credential。請指定 Credential，然後重試。 - The cmdlet cannot run because the following parameter is not specified: Token. The supplied Authentication type requires a Token. Specify Token, then retry. + 無法執行 Cmdlet，因為未指定下列參數: Token。提供的驗證類型需要 Token。請指定 Token，然後重試。 - The cmdlet cannot run because the following conflicting parameters are specified: Credential and Token. Specify either Credential or Token, then retry. + 無法執行 Cmdlet，因為指定了下列衝突的參數: Credential 和 Token。請指定 Credential 或 Token，然後重試。 - The cmdlet cannot run because the following conflicting parameters are specified: Body and InFile. Specify either Body or Infile, then retry. + 無法執行 Cmdlet，因為指定了下列衝突的參數: Body 和 InFile。請指定 Body 或 InFile，然後重試。 - The cmdlet cannot run because the following conflicting parameters are specified: Body and Form. Specify either Body or Form, then retry. + 無法執行 Cmdlet，因為指定了下列衝突的參數: Body 和 Form。請指定 Body 或 Form，然後重試。 - The cmdlet cannot run because the following conflicting parameters are specified: InFile and Form. Specify either InFile or Form, then retry. + 無法執行 Cmdlet，因為指定了下列衝突的參數: InFile 和 Form。請指定 InFile 或 Form，然後重試。 - The cmdlet cannot run because the -ContentType parameter is not a valid Content-Type header. Specify a valid Content-Type for -ContentType, then retry. To suppress header validation, supply the -SkipHeaderValidation parameter. + 無法執行 Cmdlet，因為 -ContentType 參數不是有效的 Content-Type 標頭。請為 -ContentType 指定有效的 Content-Type，然後重試。若要停用標頭驗證，請提供 -SkipHeaderValidation 參數。 - The cmdlet cannot run because the following conflicting parameters are specified: Credential and UseDefaultCredentials. Specify either Credential or UseDefaultCredentials, then retry. + 無法執行 Cmdlet，因為指定了下列衝突的參數: Credential 和 UseDefaultCredentials。請指定 Credential 或 UseDefaultCredentials，然後重試。 - Path '{0}' resolves to a directory. Specify a path including a file name, and then retry the command. + 路徑 '{0}' 會解析為目錄。請指定包含檔案名稱的路徑，然後重試命令。 - The provided JSON includes a property whose name is an empty string, this is only supported using the -AsHashTable switch. + 提供的 JSON 包含名稱為空字串的屬性，只有使用 -AsHashTable 切換參數時才支援此功能。 - Cannot convert the JSON string because a dictionary that was converted from the string contains the duplicated key '{0}'. + 無法轉換 JSON 字串，因為從字串轉換而來的字典包含重複的索引鍵 '{0}'。 - The response content cannot be parsed because the Internet Explorer engine is not available, or Internet Explorer's first-launch configuration is not complete. Specify the UseBasicParsing parameter and try again. + 無法剖析回應內容，因為 Internet Explorer 引擎無法使用，或 Internet Explorer 的首次啟動設定不完整。請指定 UseBasicParsing 參數，然後再試一次。 - Cannot follow an insecure redirection by default. Reissue the command specifying the -AllowInsecureRedirect switch. + 預設無法遵循不安全的重新導向。請重新執行命令，並指定 -AllowInsecureRedirect 切換參數。 - Cannot convert the JSON string because it contains keys with different casing. Please use the -AsHashTable switch instead. The key that was attempted to be added to the existing key '{0}' was '{1}'. + 無法轉換 JSON 字串，因為它包含大小寫不同的索引鍵。請改用 -AsHashTable 切換參數。嘗試加入現有索引鍵 '{0}' 的索引鍵為 '{1}'。 - The maximum redirection count has been exceeded. To increase the number of redirections allowed, supply a higher value to the -MaximumRedirection parameter. + 已超過重新導向次數上限。若要增加允許的重新導向次數，請為 -MaximumRedirection 參數提供較大的值。 - Path '{0}' can be resolved to multiple paths. + 路徑 '{0}' 可解析為多個路徑。 - The type '{0}' is not supported for serialization or deserialization of a dictionary. Keys must be strings. + 字典的序列化或還原序列化不支援類型 '{0}'。索引鍵必須是字串。 - Path '{0}' cannot be resolved to a file. + 無法將路徑 '{0}' 解析為檔案。 - Path '{0}' is not a file system path. Please specify the path to a file in the file system. + 路徑 '{0}' 不是檔案系統路徑。請指定檔案系統中檔案的路徑。 - The cmdlet cannot run because the following parameter is missing: OutFile. Provide a valid OutFile parameter value when using the {0} parameter, then retry. + 無法執行 Cmdlet，因為缺少下列參數: OutFile。使用 {0} 參數時，請提供有效的 OutFile 參數值，然後重試。 - The file will not be re-downloaded because the remote file is the same size as the OutFile: {0} + 將不會重新下載檔案，因為遠端檔案的大小與 OutFile 相同: {0} - The cmdlet cannot run because the following conflicting parameters are specified: ProxyCredential and ProxyUseDefaultCredentials. Specify either ProxyCredential or ProxyUseDefaultCredentials, then retry. + 無法執行 Cmdlet，因為指定了下列衝突的參數: ProxyCredential 和 ProxyUseDefaultCredentials。請指定 ProxyCredential 或 ProxyUseDefaultCredentials，然後重試。 - The cmdlet cannot run because the following parameter is missing: Proxy. Provide a valid proxy URI for the Proxy parameter when using the ProxyCredential or ProxyUseDefaultCredentials parameters, then retry. + 無法執行 Cmdlet，因為缺少下列參數: Proxy。使用 ProxyCredential 或 ProxyUseDefaultCredentials 參數時，請為 Proxy 參數提供有效的 Proxy URI，然後重試。 - Reading web response stream completed. Bytes downloaded: {0} + 已完成讀取網頁回應資料流。下載的位元組: {0} - Reading web response stream + 正在讀取網頁回應資料流 - Downloaded: {0} of {1} + 已下載: {0}/{1} - The Resume switch can only be used if OutFile targets a file but it resolves to a directory: {0}. + 只有在 OutFile 目標是檔案，但解析結果為目錄時，才能使用 Resume 切換參數: {0}。 - The cmdlet cannot run because the following conflicting parameters are specified: Session and SessionVariable. Specify either Session or SessionVariable, then retry. + 無法執行 Cmdlet，因為指定了下列衝突的參數: Session 和 SessionVariable。請指定 Session 或 SessionVariable，然後重試。 - Unable to retrieve certificates because the thumbprint is not valid. Verify the thumbprint and retry. + 無法擷取憑證，因為指紋無效。請驗證指紋並重試。 - Web request completed. (Number of bytes processed: {0}) + 已完成 Web 要求。(處理的位元組數: {0}) - Web request cancelled. (Number of bytes processed: {0}) + Web 要求已取消。(處理的位元組數: {0}) - Web request status + Web 要求狀態 - Downloaded: {0} of {1} + 已下載: {0}/{1} - Conversion from JSON failed with error: {0} + 從 JSON 轉換失敗，錯誤: {0} - Response status code does not indicate success: {0} ({1}). + 回應狀態碼未表示成功: {0} ({1})。 - Following rel link {0} + 追蹤 rel 連結 {0} - The remote server indicated it could not resume downloading. The local file will be overwritten. + 遠端伺服器指出無法繼續下載。本機檔案將會覆寫。 - Received HTTP/{0} response of content type {1} of unknown size + 已收到內容類型為 {0} 的 HTTP/{1} 回應，大小未知 - Retrying after interval of {0} seconds. Status code for previous attempt: {1} + 在 {0} 秒後重試。前次嘗試的狀態碼: {1} - Resulting JSON is truncated as serialization has exceeded the set depth of {0}. + 由於序列化深度已超過設定的 {0}，因此產生的 JSON 已截斷。 - The WebSession properties were changed between requests forcing all HTTP connections in the session to be recreated. + WebSession 屬性在要求之間已變更，強制重新建立工作階段中的所有 HTTP 連線。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/cs/TranscriptStrings.cs.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/cs/TranscriptStrings.cs.resx index d23d6495940..b5980da4dcc 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/cs/TranscriptStrings.cs.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/cs/TranscriptStrings.cs.resx @@ -118,27 +118,27 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Transcript started, output file is {0} + Přepis byl spuštěn, výstupní soubor je {0} - Transcript stopped, output file is {0} + Přepis byl zastaven, výstupní soubor je {0} - Transcription cannot be started due to the error: {0} + Přepis nelze spustit kvůli chybě: {0} - The current provider ({0}) cannot open a file. + Aktuální poskytovatel ({0}) nemůže otevřít soubor. - File {0} is read-only. Cannot write to this file. "Start-Transcript -Force" will clear the read-only attribute. + Soubor {0} je jen pro čtení. Do tohoto souboru nelze zapisovat. Příkaz „Start-Transcript -Force“ vymaže atribut jen pro čtení. - Cannot perform operation because the path resolved to more than one file. This command cannot operate on multiple files. + Operaci nelze provést, protože cesta byla přeložena na více než jeden soubor. Tento příkaz nemůže pracovat s více soubory. - File {0} already exists and {1} was specified. + Soubor {0} již existuje a už bylo zadáno: {1}. - An error occurred stopping transcription: {0} + Při zastavování přepisu došlo k chybě: {0} \ No newline at end of file diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/de/CommandLineParameterParserStrings.de.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/de/CommandLineParameterParserStrings.de.resx index 1140299d023..df23d4704d3 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/de/CommandLineParameterParserStrings.de.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/de/CommandLineParameterParserStrings.de.resx @@ -118,115 +118,115 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot process command because a command is already specified with -Command, -CommandWithArgs, or -EncodedCommand. + Der Befehl kann nicht verarbeitet werden, da bereits ein Befehl mit -Command, -CommandWithArgs oder -EncodedCommand angegeben wurde. - Cannot process the command because of a missing parameter. A command must follow -Command. + Der Befehl kann nicht verarbeitet werden, da ein Parameter fehlt. Auf -Command muss ein Befehl folgen. - Unrecognized parameter: '{0}'. + Unbekannter Parameter: „{0}“. - '-' was specified with the -Command parameter; no other arguments to -Command are permitted. + „-“ wurde mit dem Parameter „-Command“ angegeben; weitere Argumente für „-Command“ sind nicht zulässig. - '-' was specified as the argument to -Command but standard input has not been redirected for this process. + „-“ wurde als Argument für -Command angegeben, aber die Standardeingabe wurde für diesen Prozess nicht umgeleitet. - The command cannot be run because no argument has been supplied for the OutputFormat parameter. -Specify one of the following formats for this parameter: + Der Befehl kann nicht ausgeführt werden, da für den OutputFormat-Parameter kein Argument angegeben wurde. +Geben Sie für diesen Parameter eines der folgenden Formate an: {0} - Cannot process the command because the -InputFormat parameter requires an argument. Specify a valid format argument for this parameter. -Valid formats are: + Der Befehl kann nicht verarbeitet werden, da der Parameter „-InputFormat“ ein Argument erfordert. Geben Sie für diesen Parameter ein gültiges Format an. +Gültige Formate sind: {0} - Cannot process the command because of an incorrect parameter value. "{0}" is not a valid format. -Valid formats are: + Der Befehl kann nicht verarbeitet werden, da der Parameterwert nicht korrekt ist. „{0}“ ist kein gültiges Format. +Gültige Formate sind: {1} - Cannot process the command because arguments to -Command or -EncodedCommand have already been specified with -EncodedArguments. + Der Befehl kann nicht verarbeitet werden, da Argumente für -Command oder -EncodedCommand bereits mit -EncodedArguments angegeben wurden. - Cannot process the command because -EncodedArguments requires a value. Specify a value for the -EncodedArguments parameter. + Der Befehl kann nicht verarbeitet werden, da -EncodedArguments einen Wert erfordert. Geben Sie einen Wert für den Parameter „-EncodedArguments“ an. - The command cannot be run because the File parameter requires a file path. Supply a path for the File parameter and then try the command again. + Der Befehl kann nicht ausgeführt werden, da für den File-Parameter ein Dateipfad erforderlich ist. Geben Sie einen Pfad für den File-Parameter an, und versuchen Sie den Befehl erneut. - Cannot process the command because -WindowStyle requires an argument that is normal, hidden, minimized or maximized. Specify one of these argument values and try again. + Der Befehl kann nicht verarbeitet werden, da -WindowStyle ein Argument erfordert, das normal, ausgeblendet, minimiert oder maximiert ist. Geben Sie einen dieser Werte an, und versuchen Sie es erneut. - Processing -File '{0}' failed: {1} Specify a valid path for the -File parameter. + Die Verarbeitung von -File „{0}“ ist fehlgeschlagen: {1} Geben Sie einen gültigen Pfad für den Parameter „-File“ an. - Processing -WindowStyle '{0}' failed: {1}. + Verarbeiten von -WindowStyle „{0}“ ist fehlgeschlagen: {1}. - Processing -File '{0}' failed because the file does not have a '.ps1' extension. Specify a valid PowerShell script file name, and then try again. + Die Verarbeitung von -File „{0}“ ist fehlgeschlagen, da die Datei keine „.ps1“-Erweiterung hat. Geben Sie einen gültigen Dateinamen für ein PowerShell-Skript an, und versuchen Sie es erneut. - The argument '{0}' is not recognized as the name of a script file. Check the spelling of the name, or if a path was included, verify that the path is correct and try again. + Das Argument „{0}“ wird nicht als Name einer Skriptdatei erkannt. Prüfen Sie die Schreibweise des Namens bzw. stellen Sie sicher, dass der Pfad korrekt angegeben wurde, und versuchen Sie es erneut. - Cannot process the command because the value specified with -EncodedArguments is not properly encoded. The value must be Base64 encoded. + Der Befehl kann nicht verarbeitet werden, da der mit -EncodedArguments angegebene Wert nicht korrekt codiert ist. Der Wert muss Base64-codiert sein. - Cannot process the command because the value specified with -EncodedCommand is not properly encoded. The value must be Base64 encoded. + Der Befehl kann nicht verarbeitet werden, da der mit -EncodedCommand angegebene Wert nicht korrekt codiert ist. Der Wert muss Base64-codiert sein. - Cannot process the execution policy because of a missing policy name. A policy name must follow -ExecutionPolicy. + Die Ausführungsrichtlinie kann nicht verarbeitet werden, da der Richtlinienname fehlt. Auf -ExecutionPolicy muss ein Richtlinienname folgen. - Cannot process the command because -STA and -MTA are both specified. Specify either -STA or -MTA. + Der Befehl kann nicht verarbeitet werden, da sowohl -STA als auch -MTA angegeben sind. Geben Sie entweder -STA oder -MTA an. - Cannot process the command because -ConfigurationName requires an argument that is a remote endpoint configuration name. Specify this argument and try again. + Der Befehl kann nicht verarbeitet werden, da -ConfigurationName ein Argument erfordert, das den Namen eines Remotepunktkonfigurationsendpunkts angibt. Geben Sie dieses Argument an, und versuchen Sie es erneut. - Cannot process the command because -ConfigurationFile requires an argument that is a session configuration (.pssc) file path. Specify this argument and try again. + Der Befehl kann nicht verarbeitet werden, da -ConfigurationFile ein Argument erfordert, das auf eine Datei mit einer Sitzungskonfiguration (.pssc) verweist. Geben Sie dieses Argument an, und versuchen Sie es erneut. - Cannot process the command because -CustomPipeName requires an argument that is a name of the pipe you want to use. Specify this argument and try again. + Der Befehl kann nicht verarbeitet werden, da -CustomPipeName ein Argument erfordert, das den Namen der Pipe angibt, die verwendet werden soll. Geben Sie dieses Argument an, und versuchen Sie es erneut. - Cannot process the command because -CustomPipeName specified is too long. Pipe names on this platform can be up to {0} characters long. Your pipe name '{1}' is {2} characters. + Der Befehl kann nicht verarbeitet werden, da -CustomPipeName zu lang ist. Pipenamen auf dieser Plattform dürfen bis zu {0} Zeichen lang sein. Ihr Pipe-Name „{1}“ ist {2} Zeichen lang. - Cannot process the command because -SettingsFile requires an argument that is a file path. + Der Befehl kann nicht verarbeitet werden, da -SettingsFile ein Argument erfordert, das ein Dateipfad ist. - Processing -SettingsFile '{0}' failed: {1}. Specify a valid path for the -SettingsFile parameter. + Fehler beim Verarbeiten von -SettingsFile „{0}“: {1}. Geben Sie einen gültigen Pfad für den Parameter „-SettingsFile“ an. - The argument '{0}' passed to the -SettingsFile does not exist. Provide the path to an existing json file as an argument to the -SettingsFile parameter. + Das an -SettingsFile übergebene Argument „{0}“ ist nicht vorhanden. Geben Sie als Argument für den Parameter -SettingsFile den Pfad zu einer vorhandenen JSON-Datei an. - Invalid argument '{0}', did you mean: + Ungültiges Argument „{0}“. Meinten Sie vielleicht: - Parameter -WindowStyle is not implemented on this platform. + Der Parameter „-WindowStyle“ wird auf dieser Plattform nicht unterstützt. - Cannot process the command because -WorkingDirectory requires an argument that is a directory path. + Der Befehl kann nicht verarbeitet werden, da -WorkingDirectory ein Argument erfordert, das ein Verzeichnispfad ist. - Parameter -MTA is not supported on this platform. + Der Parameter „-MTA“ wird auf dieser Plattform nicht unterstützt. - Parameter -STA is not supported on this platform. + Der Parameter „-STA“ wird auf dieser Plattform nicht unterstützt. - The specified arguments must not contain null elements. + Die angegebenen Argumente dürfen keine NULL-Elemente enthalten. - Invalid ExecutionPolicy value '{0}'. + Ungültiger ExecutionPolicy-Wert „{0}“. - An argument is required to be supplied to the '{0}' parameter. + Für den Parameter „{0}“ muss ein Argument angegeben werden. Der Parameter „-File“ ist für die Richtlinie erforderlich. diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/de/TranscriptStrings.de.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/de/TranscriptStrings.de.resx index d23d6495940..453f205c92d 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/de/TranscriptStrings.de.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/de/TranscriptStrings.de.resx @@ -118,27 +118,27 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Transcript started, output file is {0} + Die Transkription wurde gestartet, Ausgabedatei ist „{0}“ - Transcript stopped, output file is {0} + Die Transkription wurde beendet, Ausgabedatei ist „{0}“ - Transcription cannot be started due to the error: {0} + Die Transkription kann aufgrund des Fehlers nicht gestartet werden: {0} - The current provider ({0}) cannot open a file. + Der aktuelle Anbieter ({0}) kann keine Datei öffnen. - File {0} is read-only. Cannot write to this file. "Start-Transcript -Force" will clear the read-only attribute. + Die Datei „{0}“ ist schreibgeschützt. In diese Datei kann nicht geschrieben werden. „Start-Transcript -Force“ entfernt das schreibgeschützte Attribut. - Cannot perform operation because the path resolved to more than one file. This command cannot operate on multiple files. + Der Vorgang kann nicht ausgeführt werden, da der Pfad in mehrere Dateien aufgelöst wurde. Dieser Befehl kann nicht für mehrere Dateien verwendet werden. - File {0} already exists and {1} was specified. + Die Datei „{0}“ ist bereits vorhanden und „{1}“ wurde angegeben. - An error occurred stopping transcription: {0} + Beim Beenden der Transkription ist ein Fehler aufgetreten: {0} \ No newline at end of file diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/es/CommandLineParameterParserStrings.es.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/es/CommandLineParameterParserStrings.es.resx index 2a77ee14181..10c4696da6c 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/es/CommandLineParameterParserStrings.es.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/es/CommandLineParameterParserStrings.es.resx @@ -118,115 +118,115 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot process command because a command is already specified with -Command, -CommandWithArgs, or -EncodedCommand. + No se puede procesar el comando porque ya se ha especificado un comando con -Command, -CommandWithArgs o -EncodedCommand. - Cannot process the command because of a missing parameter. A command must follow -Command. + No se puede procesar el comando porque falta un parámetro. Un comando debe seguir a -Command. - Unrecognized parameter: '{0}'. + Parámetro no reconocido: "{0}". - '-' was specified with the -Command parameter; no other arguments to -Command are permitted. + "-" se especificó con el parámetro -Command; no se permiten otros argumentos para -Command. - '-' was specified as the argument to -Command but standard input has not been redirected for this process. + "-" se especificó como argumento para -Command, pero no se redirigió la entrada estándar para este proceso. - The command cannot be run because no argument has been supplied for the OutputFormat parameter. -Specify one of the following formats for this parameter: + No se puede ejecutar el comando porque no se ha proporcionado ningún argumento para el parámetro OutputFormat. +Especifique uno de los formatos siguientes para este parámetro: {0} - Cannot process the command because the -InputFormat parameter requires an argument. Specify a valid format argument for this parameter. -Valid formats are: + No se puede procesar el comando porque el parámetro -InputFormat requiere un argumento. Especifique un argumento de formato válido para este parámetro. +Los formatos válidos son: {0} - Cannot process the command because of an incorrect parameter value. "{0}" is not a valid format. -Valid formats are: + No se puede procesar el comando debido a un valor de parámetro incorrecto. "{0}" no es un formato válido. +Los formatos válidos son: {1} - Cannot process the command because arguments to -Command or -EncodedCommand have already been specified with -EncodedArguments. + No se puede procesar el comando porque ya se han especificado argumentos para -Command o -EncodedCommand con -EncodedArguments. - Cannot process the command because -EncodedArguments requires a value. Specify a value for the -EncodedArguments parameter. + No se puede procesar el comando porque -EncodedArguments requiere un valor. Especifique un valor para el parámetro -EncodedArguments. - The command cannot be run because the File parameter requires a file path. Supply a path for the File parameter and then try the command again. + No se puede ejecutar el comando porque el parámetro File requiere una ruta de acceso de archivo. Proporcione una ruta de acceso para el parámetro File e intente el comando de nuevo. - Cannot process the command because -WindowStyle requires an argument that is normal, hidden, minimized or maximized. Specify one of these argument values and try again. + No se puede procesar el comando porque -WindowStyle requiere un argumento que sea normal, oculto, minimizado o maximizado. Especifique uno de estos valores de argumento e inténtelo de nuevo. - Processing -File '{0}' failed: {1} Specify a valid path for the -File parameter. + Error al procesar -File ''{0}": {1} Especifique una ruta de acceso válida para el parámetro -File. - Processing -WindowStyle '{0}' failed: {1}. + Error al procesar -WindowStyle ''{0}": {1}. - Processing -File '{0}' failed because the file does not have a '.ps1' extension. Specify a valid PowerShell script file name, and then try again. + Error al procesar -File "{0}" porque el archivo no tiene la extensión ".ps1". Especifique un nombre de archivo de script de PowerShell válido e inténtelo de nuevo. - The argument '{0}' is not recognized as the name of a script file. Check the spelling of the name, or if a path was included, verify that the path is correct and try again. + El argumento "{0}" no se reconoce como el nombre de un archivo de script. Compruebe la ortografía del nombre o, si se incluyó una ruta de acceso, compruebe que la ruta de acceso es correcta e inténtelo de nuevo. - Cannot process the command because the value specified with -EncodedArguments is not properly encoded. The value must be Base64 encoded. + No se puede procesar el comando porque el valor especificado con -EncodedArguments no está codificado correctamente. El valor debe estar codificado en Base64. - Cannot process the command because the value specified with -EncodedCommand is not properly encoded. The value must be Base64 encoded. + No se puede procesar el comando porque el valor especificado con -EncodedCommand no está codificado correctamente. El valor debe estar codificado en Base64. - Cannot process the execution policy because of a missing policy name. A policy name must follow -ExecutionPolicy. + No se puede procesar la directiva de ejecución porque falta un nombre de directiva. Un nombre de directiva debe seguir a -ExecutionPolicy. - Cannot process the command because -STA and -MTA are both specified. Specify either -STA or -MTA. + No se puede procesar el comando porque se han especificado -STA y -MTA. Especifique -STA o -MTA. - Cannot process the command because -ConfigurationName requires an argument that is a remote endpoint configuration name. Specify this argument and try again. + No se puede procesar el comando porque -ConfigurationName requiere un argumento que sea un nombre de configuración de extremo remoto. Especifique este argumento e inténtelo de nuevo. - Cannot process the command because -ConfigurationFile requires an argument that is a session configuration (.pssc) file path. Specify this argument and try again. + No se puede procesar el comando porque -ConfigurationFile requiere un argumento que sea la ruta de acceso de un archivo de configuración de sesión (.pssc). Especifique este argumento e inténtelo de nuevo. - Cannot process the command because -CustomPipeName requires an argument that is a name of the pipe you want to use. Specify this argument and try again. + No se puede procesar el comando porque -CustomPipeName requiere un argumento que sea un nombre de la canalización que desea usar. Especifique este argumento e inténtelo de nuevo. - Cannot process the command because -CustomPipeName specified is too long. Pipe names on this platform can be up to {0} characters long. Your pipe name '{1}' is {2} characters. + No se puede procesar el comando porque -CustomPipeName especificado es demasiado largo. Los nombres de canalización de esta plataforma pueden tener hasta {0} caracteres. El nombre de canalización "{1}" es {2} caracteres. - Cannot process the command because -SettingsFile requires an argument that is a file path. + No se puede procesar el comando porque -SettingsFile requiere un argumento que sea una ruta de acceso de archivo. - Processing -SettingsFile '{0}' failed: {1}. Specify a valid path for the -SettingsFile parameter. + Error al procesar -SettingsFile ''{0}": {1}. Especifique una ruta de acceso válida para el parámetro -SettingsFile. - The argument '{0}' passed to the -SettingsFile does not exist. Provide the path to an existing json file as an argument to the -SettingsFile parameter. + El argumento "{0}" pasado a -SettingsFile no existe. Proporcione la ruta de acceso a un archivo JSON existente como argumento del parámetro -SettingsFile. - Invalid argument '{0}', did you mean: + Argumento "{0}" no válido, quizás quiera decir: - Parameter -WindowStyle is not implemented on this platform. + El parámetro -WindowStyle no está implementado en esta plataforma. - Cannot process the command because -WorkingDirectory requires an argument that is a directory path. + No se puede procesar el comando porque -WorkingDirectory requiere un argumento que sea una ruta de acceso de directorio. - Parameter -MTA is not supported on this platform. + El parámetro -MTA no se admite en esta plataforma. - Parameter -STA is not supported on this platform. + El parámetro -STA no se admite en esta plataforma. - The specified arguments must not contain null elements. + Los argumentos especificados no deben contener elementos null. - Invalid ExecutionPolicy value '{0}'. + Valor de ExecutionPolicy "{0}" no válido. - An argument is required to be supplied to the '{0}' parameter. + Es necesario proporcionar un argumento al parámetro ''{0}". La directiva requiere el parámetro "-File". diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/es/TranscriptStrings.es.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/es/TranscriptStrings.es.resx index d23d6495940..b7b8b262197 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/es/TranscriptStrings.es.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/es/TranscriptStrings.es.resx @@ -118,27 +118,27 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Transcript started, output file is {0} + Transcripción iniciada, el archivo de salida es {0} - Transcript stopped, output file is {0} + Transcripción detenida, el archivo de salida es {0} - Transcription cannot be started due to the error: {0} + No se puede iniciar la transcripción debido al error: {0} - The current provider ({0}) cannot open a file. + El proveedor actual ({0}) no puede abrir un archivo. - File {0} is read-only. Cannot write to this file. "Start-Transcript -Force" will clear the read-only attribute. + El archivo {0} es de solo lectura. No se puede escribir en este archivo. "Start-Transcript -Force" borrará el atributo de solo lectura. - Cannot perform operation because the path resolved to more than one file. This command cannot operate on multiple files. + No se puede realizar la operación porque la ruta de acceso se resolvió en más de un archivo. Este comando no puede funcionar en varios archivos. - File {0} already exists and {1} was specified. + El archivo {0} ya existe y {1} se especificó. - An error occurred stopping transcription: {0} + Error al detener la transcripción: {0} \ No newline at end of file diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/fr/CommandLineParameterParserStrings.fr.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/fr/CommandLineParameterParserStrings.fr.resx index 604722b8eb8..45fda27207b 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/fr/CommandLineParameterParserStrings.fr.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/fr/CommandLineParameterParserStrings.fr.resx @@ -118,115 +118,115 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot process command because a command is already specified with -Command, -CommandWithArgs, or -EncodedCommand. + Impossible de traiter la commande, car une commande est déjà spécifiée avec -Command, -CommandWithArgs ou -EncodedCommand. - Cannot process the command because of a missing parameter. A command must follow -Command. + Impossible de traiter la commande en raison d’un paramètre manquant. Une commande doit suivre -Command. - Unrecognized parameter: '{0}'. + Paramètre non reconnu : '{0}'. - '-' was specified with the -Command parameter; no other arguments to -Command are permitted. + '-' a été spécifié avec le paramètre -Command ; aucun autre argument pour -Command n’est autorisé. - '-' was specified as the argument to -Command but standard input has not been redirected for this process. + '-' a été spécifié comme argument vers -Command, mais l’entrée standard n’a pas été redirigée pour ce processus. - The command cannot be run because no argument has been supplied for the OutputFormat parameter. -Specify one of the following formats for this parameter: + Impossible d’exécuter la commande, car aucun argument n’a été fourni pour le paramètre OutputFormat. +Spécifiez l’un des formats suivants pour ce paramètre : {0} - Cannot process the command because the -InputFormat parameter requires an argument. Specify a valid format argument for this parameter. -Valid formats are: + Impossible de traiter la commande, car le paramètre -InputFormat requiert un argument. Spécifiez un argument de format valide pour ce paramètre. +Les formats valides sont les suivants : {0} - Cannot process the command because of an incorrect parameter value. "{0}" is not a valid format. -Valid formats are: + Impossible de traiter la commande en raison d’une valeur de paramètre incorrecte. «{0}" n’est pas un format valide. +Les formats valides sont les suivants : {1} - Cannot process the command because arguments to -Command or -EncodedCommand have already been specified with -EncodedArguments. + Impossible de traiter la commande, car les arguments de -Command ou -EncodedCommand ont déjà été spécifiés avec -EncodedArguments. - Cannot process the command because -EncodedArguments requires a value. Specify a value for the -EncodedArguments parameter. + Impossible de traiter la commande, car -EncodedArguments requiert une valeur. Spécifiez une valeur pour le paramètre -EncodedArguments. - The command cannot be run because the File parameter requires a file path. Supply a path for the File parameter and then try the command again. + Impossible d’exécuter la commande, car le paramètre File requiert un chemin d’accès au fichier. Fournissez un chemin d’accès pour le paramètre File, puis réessayez la commande. - Cannot process the command because -WindowStyle requires an argument that is normal, hidden, minimized or maximized. Specify one of these argument values and try again. + Impossible de traiter la commande, car -WindowStyle requiert un argument normal, masqué, réduit ou agrandi. Spécifiez l’une de ces valeurs d’argument et réessayez. - Processing -File '{0}' failed: {1} Specify a valid path for the -File parameter. + Échec du traitement de -File '{0}' : {1} Spécifiez un chemin d’accès valide pour le paramètre -File. - Processing -WindowStyle '{0}' failed: {1}. + Échec du traitement de -WindowStyle '{0}' : {1}. - Processing -File '{0}' failed because the file does not have a '.ps1' extension. Specify a valid PowerShell script file name, and then try again. + Échec du traitement de -File '{0}', car le fichier n’a pas d’extension '.ps1'. Spécifiez un nom de fichier de script PowerShell valide, puis réessayez. - The argument '{0}' is not recognized as the name of a script file. Check the spelling of the name, or if a path was included, verify that the path is correct and try again. + L’argument «{0}» n’est pas reconnu comme nom d’un fichier de script. Vérifiez l’orthographe du nom ou, si un chemin d’accès a été inclus, vérifiez que le chemin d’accès est correct et réessayez. - Cannot process the command because the value specified with -EncodedArguments is not properly encoded. The value must be Base64 encoded. + Impossible de traiter la commande, car la valeur spécifiée avec -EncodedArguments n’est pas correctement encodée. La valeur doit être encodée en Base64. - Cannot process the command because the value specified with -EncodedCommand is not properly encoded. The value must be Base64 encoded. + Impossible de traiter la commande, car la valeur spécifiée avec -EncodedCommand n’est pas correctement encodée. La valeur doit être encodée en Base64. - Cannot process the execution policy because of a missing policy name. A policy name must follow -ExecutionPolicy. + Impossible de traiter la stratégie d’exécution en raison d’un nom de stratégie manquant. Un nom de stratégie doit suivre -ExecutionPolicy. - Cannot process the command because -STA and -MTA are both specified. Specify either -STA or -MTA. + Impossible de traiter la commande, car -STA et -MTA sont tous deux spécifiés. Spécifiez -STA ou -MTA. - Cannot process the command because -ConfigurationName requires an argument that is a remote endpoint configuration name. Specify this argument and try again. + Impossible de traiter la commande, car -ConfigurationName requiert un argument qui est un nom de configuration de point de terminaison distant. Spécifiez cet argument et réessayez. - Cannot process the command because -ConfigurationFile requires an argument that is a session configuration (.pssc) file path. Specify this argument and try again. + Impossible de traiter la commande car -ConfigurationFile requiert un argument qui est un chemin d'accès à un fichier de configuration de session (.pssc). Spécifiez cet argument et réessayez. - Cannot process the command because -CustomPipeName requires an argument that is a name of the pipe you want to use. Specify this argument and try again. + Impossible de traiter la commande, car -CustomPipeName requiert un argument qui est le nom du canal que vous souhaitez utiliser. Spécifiez cet argument et réessayez. - Cannot process the command because -CustomPipeName specified is too long. Pipe names on this platform can be up to {0} characters long. Your pipe name '{1}' is {2} characters. + Impossible de traiter la commande, car -CustomPipeName spécifié est trop long. Les noms de canaux sur cette plateforme peuvent avoir jusqu’à {0} caractères. Le nom de votre canal «{1}» est {2} caractères. - Cannot process the command because -SettingsFile requires an argument that is a file path. + Impossible de traiter la commande, car -SettingsFile nécessite un argument qui est un chemin d’accès de fichier. - Processing -SettingsFile '{0}' failed: {1}. Specify a valid path for the -SettingsFile parameter. + Échec du traitement de -SettingsFile '{0}' : {1}. Spécifiez un chemin d’accès valide pour le paramètre -SettingsFile. - The argument '{0}' passed to the -SettingsFile does not exist. Provide the path to an existing json file as an argument to the -SettingsFile parameter. + L’argument «{0}» passé à -SettingsFile n’existe pas. Indiquez le chemin d’accès à un fichier JSON existant en tant qu’argument du paramètre -SettingsFile. - Invalid argument '{0}', did you mean: + Argument non valide '{0}', voulez-vous dire : - Parameter -WindowStyle is not implemented on this platform. + Le paramètre -WindowStyle n’est pas implémenté sur cette plateforme. - Cannot process the command because -WorkingDirectory requires an argument that is a directory path. + Impossible de traiter la commande, car -WorkingDirectory requiert un argument qui est un chemin d’accès de répertoire. - Parameter -MTA is not supported on this platform. + Le paramètre -MTA n’est pas pris en charge sur cette plateforme. - Parameter -STA is not supported on this platform. + Le paramètre -STA n’est pas pris en charge sur cette plateforme. - The specified arguments must not contain null elements. + Les arguments spécifiés ne doivent pas contenir d'éléments nuls. - Invalid ExecutionPolicy value '{0}'. + Valeur ExecutionPolicy non valide '{0}'. - An argument is required to be supplied to the '{0}' parameter. + Un argument doit être fourni au paramètre '{0}'. Le paramètre « -File » est requis par la stratégie. diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/fr/TranscriptStrings.fr.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/fr/TranscriptStrings.fr.resx index d23d6495940..c09f2ab35a1 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/fr/TranscriptStrings.fr.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/fr/TranscriptStrings.fr.resx @@ -118,27 +118,27 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Transcript started, output file is {0} + La transcription a démarré, le fichier de sortie est {0} - Transcript stopped, output file is {0} + La transcription s’est arrêtée, le fichier de sortie est {0} - Transcription cannot be started due to the error: {0} + La transcription n’a pas pu démarrer en raison de l’erreur suivante : {0} - The current provider ({0}) cannot open a file. + Le fournisseur actuel ({0}) ne peut pas ouvrir de fichier. - File {0} is read-only. Cannot write to this file. "Start-Transcript -Force" will clear the read-only attribute. + Le fichier {0} est en lecture seule. Impossible d’écrire dans ce fichier. « Start-Transcript -Force » efface l’attribut en lecture seule. - Cannot perform operation because the path resolved to more than one file. This command cannot operate on multiple files. + Nous ne pouvons pas effectuer l’opération, car le chemin d’accès a été résolu en plusieurs fichiers. Cette commande ne peut pas s’exécuter sur plusieurs fichiers. - File {0} already exists and {1} was specified. + Le fichier {0} existe déjà et {1} a été spécifié. - An error occurred stopping transcription: {0} + Une erreur s’est produite lors de l’arrêt de la transcription : {0} \ No newline at end of file diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/ja/CommandLineParameterParserStrings.ja.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/ja/CommandLineParameterParserStrings.ja.resx index f12a6dac16d..c1d2a3563e7 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/ja/CommandLineParameterParserStrings.ja.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/ja/CommandLineParameterParserStrings.ja.resx @@ -118,115 +118,115 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot process command because a command is already specified with -Command, -CommandWithArgs, or -EncodedCommand. + -Command、-CommandWithArgs、または -EncodedCommand でコマンドが既に指定されているため、コマンドを処理できません。 - Cannot process the command because of a missing parameter. A command must follow -Command. + パラメーターがないため、コマンドを処理できません。コマンドは -Command の後に続ける必要があります。 - Unrecognized parameter: '{0}'. + パラメーター: '{0}' が認識されていません。 - '-' was specified with the -Command parameter; no other arguments to -Command are permitted. + '-' が -Command パラメーターで指定されました。-Command に対する他の引数は許可されません。 - '-' was specified as the argument to -Command but standard input has not been redirected for this process. + -Command の引数として '-' が指定されましたが、このプロセスの標準入力はリダイレクトされていません。 - The command cannot be run because no argument has been supplied for the OutputFormat parameter. -Specify one of the following formats for this parameter: + OutputFormat パラメーターに引数が指定されていないため、コマンドを実行できません。 +このパラメーターには、次のいずれかの形式を指定します: {0} - Cannot process the command because the -InputFormat parameter requires an argument. Specify a valid format argument for this parameter. -Valid formats are: + -InputFormat パラメーターに引数が必要なため、コマンドを処理できません。このパラメーターの有効な書式引数を指定してください。 +有効な形式は次のとおりです: {0} - Cannot process the command because of an incorrect parameter value. "{0}" is not a valid format. -Valid formats are: + パラメーター値が正しくないため、コマンドを処理できません。"{0}" は有効な形式ではありません。 +有効な形式は次のとおりです: {1} - Cannot process the command because arguments to -Command or -EncodedCommand have already been specified with -EncodedArguments. + -Command または -EncodedCommand への引数が -EncodedArguments で既に指定されているため、コマンドを処理できません。 - Cannot process the command because -EncodedArguments requires a value. Specify a value for the -EncodedArguments parameter. + -EncodedArguments には値が必要なため、コマンドを処理できません。-EncodedArguments パラメーターの値を指定してください。 - The command cannot be run because the File parameter requires a file path. Supply a path for the File parameter and then try the command again. + File パラメーターにファイル パスが必要なため、コマンドを実行できません。File パラメーターのパスを指定してから、コマンドを再試行してください。 - Cannot process the command because -WindowStyle requires an argument that is normal, hidden, minimized or maximized. Specify one of these argument values and try again. + -WindowStyle には、通常、非表示、最小化、最大化の引数が必要なため、コマンドを処理できません。これらの引数の値のいずれかを指定してから、もう一度お試しください。 - Processing -File '{0}' failed: {1} Specify a valid path for the -File parameter. + -File '{0}' の処理に失敗しました: {1} -File パラメーターの有効なパスを指定してください。 - Processing -WindowStyle '{0}' failed: {1}. + -WindowStyle '{0}' の処理に失敗しました: {1}。 - Processing -File '{0}' failed because the file does not have a '.ps1' extension. Specify a valid PowerShell script file name, and then try again. + ファイル '{0}' の処理に失敗しました。ファイルの拡張子が '.ps1' ではありません。有効な PowerShell スクリプト ファイル名を指定してから、やり直してください。 - The argument '{0}' is not recognized as the name of a script file. Check the spelling of the name, or if a path was included, verify that the path is correct and try again. + 引数 '{0}' はスクリプト ファイルの名前として認識されません。名前のスペルを確認するか、パスが含まれている場合はパスが正しいことを確認してから、もう一度お試しください。 - Cannot process the command because the value specified with -EncodedArguments is not properly encoded. The value must be Base64 encoded. + -EncodedArguments で指定された値が正しくエンコードされていないため、コマンドを処理できません。値は Base64 でエンコードされている必要があります。 - Cannot process the command because the value specified with -EncodedCommand is not properly encoded. The value must be Base64 encoded. + -EncodedCommand で指定された値が正しくエンコードされていないため、コマンドを処理できません。値は Base64 でエンコードされている必要があります。 - Cannot process the execution policy because of a missing policy name. A policy name must follow -ExecutionPolicy. + ポリシー名がないため、実行ポリシーを処理できません。ポリシー名は -ExecutionPolicy の後に続く必要があります。 - Cannot process the command because -STA and -MTA are both specified. Specify either -STA or -MTA. + -STA と -MTA の両方が指定されているため、コマンドを処理できません。-STA または -MTA のいずれかを指定してください。 - Cannot process the command because -ConfigurationName requires an argument that is a remote endpoint configuration name. Specify this argument and try again. + -ConfigurationName にはリモート エンドポイント構成名の引数が必要なため、コマンドを処理できません。この引数を指定して、もう一度やり直してください。 - Cannot process the command because -ConfigurationFile requires an argument that is a session configuration (.pssc) file path. Specify this argument and try again. + -ConfigurationFile にはセッション構成 (.pssc) ファイル パスの引数が必要なため、コマンドを処理できません。この引数を指定して、もう一度やり直してください。 - Cannot process the command because -CustomPipeName requires an argument that is a name of the pipe you want to use. Specify this argument and try again. + -CustomPipeName には使用するパイプの名前である引数が必要なため、コマンドを処理できません。この引数を指定して、もう一度やり直してください。 - Cannot process the command because -CustomPipeName specified is too long. Pipe names on this platform can be up to {0} characters long. Your pipe name '{1}' is {2} characters. + 指定された -CustomPipeName が長すぎるため、コマンドを処理できません。このプラットフォームのパイプ名は、最大 {0} 文字まで指定できます。パイプ名 '{1}' は {2} 文字です。 - Cannot process the command because -SettingsFile requires an argument that is a file path. + -SettingsFile にはファイル パスである引数が必要なため、コマンドを処理できません。 - Processing -SettingsFile '{0}' failed: {1}. Specify a valid path for the -SettingsFile parameter. + -SettingsFile '{0}' の処理に失敗しました: {1}。-SettingsFile パラメーターの有効なパスを指定してください。 - The argument '{0}' passed to the -SettingsFile does not exist. Provide the path to an existing json file as an argument to the -SettingsFile parameter. + -SettingsFile に渡された引数 '{0}' が存在しません。既存の json ファイルへのパスを -SettingsFile パラメーターの引数として指定します。 - Invalid argument '{0}', did you mean: + 引数 '{0}' が無効です。次のことを意味しましたか: - Parameter -WindowStyle is not implemented on this platform. + パラメーター -WindowStyle は、このプラットフォームでは実装されていません。 - Cannot process the command because -WorkingDirectory requires an argument that is a directory path. + -WorkingDirectory にはディレクトリ パスである引数が必要なため、コマンドを処理できません。 - Parameter -MTA is not supported on this platform. + パラメーター -MTA は、このプラットフォームではサポートされていません。 - Parameter -STA is not supported on this platform. + パラメーター -STA は、このプラットフォームではサポートされていません。 - The specified arguments must not contain null elements. + 指定された引数に null 値要素を含めることはできません。 - Invalid ExecutionPolicy value '{0}'. + ExecutionPolicy 値 '{0}' が無効です。 - An argument is required to be supplied to the '{0}' parameter. + 引数を '{0}' パラメーターに指定する必要があります。 パラメーター "-File" はポリシーで必要です。 diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/ja/ConsoleHostStrings.ja.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/ja/ConsoleHostStrings.ja.resx index bf7ab57b1a3..2cc411f5a8e 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/ja/ConsoleHostStrings.ja.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/ja/ConsoleHostStrings.ja.resx @@ -118,74 +118,74 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot display prompt because too many nested prompts are already running. + 既に実行されている入れ子になったプロンプトが多すぎるため、プロンプトを表示できません。 - Cannot process input loop. ExitCurrentLoop was called when no InputLoops were running. + 入力ループを処理できません。InputLoops が実行されていないときに ExitCurrentLoop が呼び出されました。 PS> - The shell cannot be started. A failure occurred during initialization: + シェルを開始できません。初期化中にエラーが発生しました: - The shell cannot be started. An InitialSessionState object has been provided along with a -ConfigurationFile argument. Both configuration directives cannot be used at the same time. + シェルを開始できません。InitialSessionState オブジェクトが -ConfigurationFile 引数と共に指定されました。両方の構成ディレクティブを同時に使用することはできません。 - An error has occurred that was not properly handled. Additional information is shown below. The PowerShell process will exit. + 正しく処理されなかったエラーが発生しました。追加情報を以下に示します。PowerShell プロセスが終了します。 ********************** -PowerShell transcript start -Start time: {0:yyyyMMddHHmmss} -Username : {1}\{2} -Machine : {3} ({4}) +PowerShell トランスクリプトの開始 +開始時刻: {0:yyyyMMddHHmmss} +ユーザー名 : {1}\{2} +マシン : {3} ({4}) ********************** ********************** -PowerShell transcript end -End time: {0:yyyyMMddHHmmss} +PowerShell トランスクリプトの終了 +終了時刻: {0:yyyyMMddHHmmss} ********************** - Command '{0}' could not be run because some PowerShell Snap-Ins did not load. + 一部の PowerShell スナップインが読み込まれなかったため、コマンド '{0}' を実行できませんでした。 - Command '{0}' was not run as the session in which it was intended to run was either closed or broken + コマンド '{0}' は、実行を意図したセッションが閉じられたか壊れているため、実行されませんでした - Entering debug mode. Use h or ? for help. + デバッグ モードに入ります。ヘルプには h または ? を使用します。 - Hit {0} + ヒット {0} {0}:{1,-3} {2} -The current session does not support debugging; execution will continue. +現在のセッションはデバッグをサポートしていません。実行は続行されます。 - Cannot load PSReadline module. Console is running without PSReadline. + PSReadline モジュールを読み込めません。 コンソールは PSReadline なしで実行されています。 - More than one server mode parameter was specified. Server mode parameters must be used exclusively. + 複数のサーバー モード パラメーターが指定されました。サーバー モード パラメーターは排他的に使用する必要があります。 - Loading personal and system profiles took {0}ms. + 個人プロファイルとシステム プロファイルの読み込みに {0} ミリ秒かかりました。 - Run as Administrator + 管理者として実行 - PushRunspace can only push a remote runspace. + PushRunspace はリモート実行空間のみをプッシュできます。 - The '{0}' parameter is mandatory and must be specified when using the '{1}' parameter. + '{0}' パラメーターは必須であり、'{1}' パラメーターを使用する場合は指定する必要があります。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/pl/CommandLineParameterParserStrings.pl.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/pl/CommandLineParameterParserStrings.pl.resx index 379742b55ef..9f63c9c062c 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/pl/CommandLineParameterParserStrings.pl.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/pl/CommandLineParameterParserStrings.pl.resx @@ -118,115 +118,115 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot process command because a command is already specified with -Command, -CommandWithArgs, or -EncodedCommand. + Nie można przetworzyć polecenia, ponieważ określono już polecenie -Command, -CommandWithArgs lub -EncodedCommand. - Cannot process the command because of a missing parameter. A command must follow -Command. + Nie można przetworzyć polecenia z powodu braku parametru. Polecenie musi być zgodne z poleceniem -Command. - Unrecognized parameter: '{0}'. + Nierozpoznany parametr: „{0}”. - '-' was specified with the -Command parameter; no other arguments to -Command are permitted. + Element „-” został określony za pomocą parametru -Command; żadne inne argumenty polecenia -Command nie są dozwolone. - '-' was specified as the argument to -Command but standard input has not been redirected for this process. + Element „-” został określony jako argument polecenia -Command, ale standardowe dane wejściowe nie zostały przekierowane dla tego procesu. - The command cannot be run because no argument has been supplied for the OutputFormat parameter. -Specify one of the following formats for this parameter: + Nie można uruchomić polecenia, ponieważ nie podano argumentu dla parametru OutputFormat. +Określ jeden z następujących formatów dla tego parametru: {0} - Cannot process the command because the -InputFormat parameter requires an argument. Specify a valid format argument for this parameter. -Valid formats are: + Nie można przetworzyć polecenia, ponieważ parametr -InputFormat wymaga argumentu. Określ prawidłowy argument formatu dla tego parametru. +Prawidłowe formaty to: {0} - Cannot process the command because of an incorrect parameter value. "{0}" is not a valid format. -Valid formats are: + Nie można przetworzyć polecenia z powodu nieprawidłowej wartości parametru. „{0}” nie jest prawidłowym formatem. +Prawidłowe formaty to: {1} - Cannot process the command because arguments to -Command or -EncodedCommand have already been specified with -EncodedArguments. + Nie można przetworzyć polecenia, ponieważ argumenty polecenia -Command lub -EncodedCommand zostały już określone za pomocą parametru -EncodedArguments. - Cannot process the command because -EncodedArguments requires a value. Specify a value for the -EncodedArguments parameter. + Nie można przetworzyć polecenia, ponieważ parametr -EncodedArguments wymaga wartości. Określ wartość parametru -EncodedArguments. - The command cannot be run because the File parameter requires a file path. Supply a path for the File parameter and then try the command again. + Nie można uruchomić polecenia, ponieważ parametr File wymaga ścieżki pliku. Podaj ścieżkę parametru File, a następnie spróbuj ponownie wykonać polecenie. - Cannot process the command because -WindowStyle requires an argument that is normal, hidden, minimized or maximized. Specify one of these argument values and try again. + Nie można przetworzyć polecenia, ponieważ parametr -WindowStyle wymaga argumentu normalnego, ukrytego, zminimalizowanego lub zmaksymalizowanego. Określ jedną z tych wartości argumentów i spróbuj ponownie. - Processing -File '{0}' failed: {1} Specify a valid path for the -File parameter. + Przetwarzanie pliku -File „{0}” nie powiodło się: {1}. Określ prawidłową ścieżkę dla parametru -File. - Processing -WindowStyle '{0}' failed: {1}. + Przetwarzanie elementu -WindowStyle „{0}” nie powiodło się: {1}. - Processing -File '{0}' failed because the file does not have a '.ps1' extension. Specify a valid PowerShell script file name, and then try again. + Przetwarzanie pliku -File „{0}” nie powiodło się, ponieważ plik nie ma rozszerzenia „.ps1”. Określ prawidłową nazwę pliku skryptu programu PowerShell, a następnie spróbuj ponownie. - The argument '{0}' is not recognized as the name of a script file. Check the spelling of the name, or if a path was included, verify that the path is correct and try again. + Argument „{0}” nie jest rozpoznawany jako nazwa pliku skryptu. Sprawdź pisownię nazwy lub sprawdź, czy ścieżka została dołączona, sprawdź, czy ścieżka jest poprawna, i spróbuj ponownie. - Cannot process the command because the value specified with -EncodedArguments is not properly encoded. The value must be Base64 encoded. + Nie można przetworzyć polecenia, ponieważ wartość określona za pomocą parametru -EncodedArguments nie jest poprawnie zakodowana. Wartość musi być zakodowana w formacie Base64. - Cannot process the command because the value specified with -EncodedCommand is not properly encoded. The value must be Base64 encoded. + Nie można przetworzyć polecenia, ponieważ wartość określona za pomocą polecenia -EncodedCommand nie jest poprawnie zakodowana. Wartość musi być zakodowana w formacie Base64. - Cannot process the execution policy because of a missing policy name. A policy name must follow -ExecutionPolicy. + Nie można przetworzyć zasad wykonywania z powodu braku nazwy zasad. Nazwa zasad musi być zgodna z parametrem -ExecutionPolicy. - Cannot process the command because -STA and -MTA are both specified. Specify either -STA or -MTA. + Nie można przetworzyć polecenia, ponieważ określono zarówno parametry -STA, jak i -MTA. Określ parametr -STA lub -MTA. - Cannot process the command because -ConfigurationName requires an argument that is a remote endpoint configuration name. Specify this argument and try again. + Nie można przetworzyć polecenia, ponieważ parametr -ConfigurationName wymaga argumentu, który jest nazwą konfiguracji zdalnego punktu końcowego. Określ ten argument i spróbuj ponownie. - Cannot process the command because -ConfigurationFile requires an argument that is a session configuration (.pssc) file path. Specify this argument and try again. + Nie można przetworzyć polecenia, ponieważ parametr -ConfigurationFile wymaga argumentu będącego ścieżką pliku konfiguracji sesji (.pssc). Określ ten argument i spróbuj ponownie. - Cannot process the command because -CustomPipeName requires an argument that is a name of the pipe you want to use. Specify this argument and try again. + Nie można przetworzyć polecenia, ponieważ parametr -CustomPipeName wymaga argumentu, który jest nazwą potoku, którego chcesz użyć. Określ ten argument i spróbuj ponownie. - Cannot process the command because -CustomPipeName specified is too long. Pipe names on this platform can be up to {0} characters long. Your pipe name '{1}' is {2} characters. + Nie można przetworzyć polecenia, ponieważ określony parametr -CustomPipeName jest za długi. Nazwy potoków na tej platformie mają określony maksymalny limit znaków ({0}). Nazwa potoku „{1}” ma określoną liczbę znaków ({2}). - Cannot process the command because -SettingsFile requires an argument that is a file path. + Nie można przetworzyć polecenia, ponieważ parametr -SettingsFile wymaga argumentu będącego ścieżką pliku. - Processing -SettingsFile '{0}' failed: {1}. Specify a valid path for the -SettingsFile parameter. + Przetwarzanie pliku -SettingsFile „{0}”nie powiodło się: {1}. Określ prawidłową ścieżkę parametru -SettingsFile. - The argument '{0}' passed to the -SettingsFile does not exist. Provide the path to an existing json file as an argument to the -SettingsFile parameter. + Argument „{0}” przekazany do pliku -SettingsFile nie istnieje. Podaj ścieżkę do istniejącego pliku JSON jako argument parametru -SettingsFile. - Invalid argument '{0}', did you mean: + Nieprawidłowy argument „{0}”, czy chodziło Ci o: - Parameter -WindowStyle is not implemented on this platform. + Parametr -WindowStyle nie jest zaimplementowany na tej platformie. - Cannot process the command because -WorkingDirectory requires an argument that is a directory path. + Nie można przetworzyć polecenia, ponieważ parametr -WorkingDirectory wymaga argumentu będącego ścieżką katalogu. - Parameter -MTA is not supported on this platform. + Parametr -MTA nie jest obsługiwany na tej platformie. - Parameter -STA is not supported on this platform. + Parametr -STA nie jest obsługiwany na tej platformie. - The specified arguments must not contain null elements. + Określone argumenty nie mogą zawierać elementów o wartości null. - Invalid ExecutionPolicy value '{0}'. + Nieprawidłowa wartość ExecutionPolicy „{0}”. - An argument is required to be supplied to the '{0}' parameter. + Argument musi zostać podany do parametru „{0}”. Parametr „-File” jest wymagany przez zasady. diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/ru/CommandLineParameterParserStrings.ru.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/ru/CommandLineParameterParserStrings.ru.resx index bd983e7f717..2a189bdc62b 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/ru/CommandLineParameterParserStrings.ru.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/ru/CommandLineParameterParserStrings.ru.resx @@ -118,115 +118,115 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot process command because a command is already specified with -Command, -CommandWithArgs, or -EncodedCommand. + Не удается обработать команду, так как команда уже указана с помощью параметров -Command, -CommandWithArgs или -EncodedCommand. - Cannot process the command because of a missing parameter. A command must follow -Command. + Не удается обработать команду, так как отсутствует параметр. За параметром -Command должна следовать команда. - Unrecognized parameter: '{0}'. + Нераспознанный параметр: {0}. - '-' was specified with the -Command parameter; no other arguments to -Command are permitted. + "-" был указан с параметром -Command; никакие другие аргументы для -Command не допускаются. - '-' was specified as the argument to -Command but standard input has not been redirected for this process. + "-" был указан в качестве аргумента для параметра -Command, но для этого процесса стандартный ввод не был перенаправлен. - The command cannot be run because no argument has been supplied for the OutputFormat parameter. -Specify one of the following formats for this parameter: + Не удается выполнить команду, так как для параметра OutputFormat не указан аргумент. +Укажите один из следующих форматов для этого параметра: {0} - Cannot process the command because the -InputFormat parameter requires an argument. Specify a valid format argument for this parameter. -Valid formats are: + Не удается обработать команду, так как для параметра -InputFormat требуется аргумент. Укажите допустимый формат для этого параметра. +Допустимые форматы: {0} - Cannot process the command because of an incorrect parameter value. "{0}" is not a valid format. -Valid formats are: + Не удается обработать команду из-за неверного значения параметра. {0} не является допустимым форматом. +Допустимые форматы: {1} - Cannot process the command because arguments to -Command or -EncodedCommand have already been specified with -EncodedArguments. + Не удается обработать команду, так как аргументы для параметров -Command или -EncodedCommand уже указаны с помощью -EncodedArguments. - Cannot process the command because -EncodedArguments requires a value. Specify a value for the -EncodedArguments parameter. + Не удается обработать команду, так как для параметра -EncodedArguments требуется значение. Укажите значение для параметра -EncodedArguments. - The command cannot be run because the File parameter requires a file path. Supply a path for the File parameter and then try the command again. + Не удается выполнить команду, так как для параметра File требуется путь к файлу. Укажите путь для параметра File и повторите команду. - Cannot process the command because -WindowStyle requires an argument that is normal, hidden, minimized or maximized. Specify one of these argument values and try again. + Не удается обработать команду, так как для параметра -WindowStyle требуется аргумент со значением normal, hidden, minimized или maximized. Укажите одно из этих значений аргументов и повторите попытку. - Processing -File '{0}' failed: {1} Specify a valid path for the -File parameter. + Обработка -File {0} завершилась сбоем: {1} Укажите допустимый путь для параметра -File. - Processing -WindowStyle '{0}' failed: {1}. + Сбой обработки -WindowStyle {0}: {1}. - Processing -File '{0}' failed because the file does not have a '.ps1' extension. Specify a valid PowerShell script file name, and then try again. + Обработка -File {0} завершилась сбоем, так как файл не имеет расширения .ps1. Укажите допустимое имя файла сценария PowerShell и повторите попытку. - The argument '{0}' is not recognized as the name of a script file. Check the spelling of the name, or if a path was included, verify that the path is correct and try again. + Аргумент {0} не распознан как имя файла сценария. Проверьте правильность написания имени, а если включен путь, то проверьте правильность пути и повторите попытку. - Cannot process the command because the value specified with -EncodedArguments is not properly encoded. The value must be Base64 encoded. + Не удается обработать команду, так как значение, указанное с помощью -EncodedArguments, закодировано неправильно. Значение должно быть закодировано в формате Base64. - Cannot process the command because the value specified with -EncodedCommand is not properly encoded. The value must be Base64 encoded. + Не удается обработать команду, так как значение, указанное с помощью -EncodedCommand, закодировано неправильно. Значение должно быть закодировано в формате Base64. - Cannot process the execution policy because of a missing policy name. A policy name must follow -ExecutionPolicy. + Не удается обработать политику выполнения из-за отсутствия имени политики. За параметром -ExecutionPolicy должно следовать имя политики. - Cannot process the command because -STA and -MTA are both specified. Specify either -STA or -MTA. + Не удается обработать команду, так как одновременно указаны -STA и -MTA. Укажите -STA или -MTA. - Cannot process the command because -ConfigurationName requires an argument that is a remote endpoint configuration name. Specify this argument and try again. + Не удается обработать команду, так как для параметра -ConfigurationName требуется аргумент — имя конфигурации удаленной конечной точки. Укажите этот аргумент и повторите попытку. - Cannot process the command because -ConfigurationFile requires an argument that is a session configuration (.pssc) file path. Specify this argument and try again. + Не удается обработать команду, так как для -ConfigurationFile требуется аргумент — путь к файлу конфигурации сеанса (.pssc). Укажите этот аргумент и повторите попытку. - Cannot process the command because -CustomPipeName requires an argument that is a name of the pipe you want to use. Specify this argument and try again. + Не удается обработать команду, так как для параметра -CustomPipeName требуется аргумент — имя канала, который нужно использовать. Укажите этот аргумент и повторите попытку. - Cannot process the command because -CustomPipeName specified is too long. Pipe names on this platform can be up to {0} characters long. Your pipe name '{1}' is {2} characters. + Не удается обработать команду, так как указано слишком длинное имя -CustomPipeName. На этой платформе имена каналов могут содержать до {0} символов. Имя вашего канала {1} состоит из {2} символов. - Cannot process the command because -SettingsFile requires an argument that is a file path. + Не удается обработать команду, так как для параметра -SettingsFile требуется аргумент — путь к файлу. - Processing -SettingsFile '{0}' failed: {1}. Specify a valid path for the -SettingsFile parameter. + Не удалось обработать -SettingsFile {0}: {1}. Укажите допустимый путь для параметра -SettingsFile. - The argument '{0}' passed to the -SettingsFile does not exist. Provide the path to an existing json file as an argument to the -SettingsFile parameter. + Аргумент {0}, переданный в -SettingsFile, не существует. В качестве аргумента для параметра -SettingsFile укажите путь к существующему JSON-файлу. - Invalid argument '{0}', did you mean: + Недопустимый аргумент {0}. Возможно, вы имели в виду: - Parameter -WindowStyle is not implemented on this platform. + Параметр -WindowStyle не реализован на этой платформе. - Cannot process the command because -WorkingDirectory requires an argument that is a directory path. + Не удается обработать команду, так как для параметра -WorkingDirectory требуется аргумент — путь к каталогу. - Parameter -MTA is not supported on this platform. + Параметр -MTA не поддерживается на этой платформе. - Parameter -STA is not supported on this platform. + Параметр -STA не поддерживается на этой платформе. - The specified arguments must not contain null elements. + Указанные аргументы не должны содержать элементы NULL. - Invalid ExecutionPolicy value '{0}'. + Недопустимое значение ExecutionPolicy {0}. - An argument is required to be supplied to the '{0}' parameter. + Для параметра {0} необходимо указать аргумент. Параметр -File обязателен согласно политике. diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/tr/CommandLineParameterParserStrings.tr.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/tr/CommandLineParameterParserStrings.tr.resx index d1be6cc670b..362ed5ae81e 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/tr/CommandLineParameterParserStrings.tr.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/tr/CommandLineParameterParserStrings.tr.resx @@ -118,115 +118,115 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot process command because a command is already specified with -Command, -CommandWithArgs, or -EncodedCommand. + -Command, -CommandWithArgs veya -EncodedCommand ile zaten bir komut belirtildiği için komut işlenemiyor. - Cannot process the command because of a missing parameter. A command must follow -Command. + Eksik bir parametre nedeniyle komut işlenemiyor. -Command sonrasında bir komut gelmelidir. - Unrecognized parameter: '{0}'. + Tanınmayan parametre: '{0}'. - '-' was specified with the -Command parameter; no other arguments to -Command are permitted. + -Command parametresiyle '-' belirtildi; -Command için başka bağımsız değişkenlere izin verilmez. - '-' was specified as the argument to -Command but standard input has not been redirected for this process. + -Command için bağımsız değişken olarak '-' belirtildi ancak bu işlem için standart giriş yeniden yönlendirilmedi. - The command cannot be run because no argument has been supplied for the OutputFormat parameter. -Specify one of the following formats for this parameter: + OutputFormat parametresi için bağımsız değişken sağlanmadığından komut çalıştırılamıyor. +Bu parametre için aşağıdaki biçimlerden birini belirtin: {0} - Cannot process the command because the -InputFormat parameter requires an argument. Specify a valid format argument for this parameter. -Valid formats are: + -InputFormat parametresi bir bağımsız değişken gerektirdiğinden komut işlenemiyor. Bu parametre için geçerli bir biçim bağımsız değişkeni belirtin. +Geçerli biçimler: {0} - Cannot process the command because of an incorrect parameter value. "{0}" is not a valid format. -Valid formats are: + Hatalı parametre değeri nedeniyle komut işlenemiyor. "{0}" geçerli bir biçim değil. +Geçerli biçimler: {1} - Cannot process the command because arguments to -Command or -EncodedCommand have already been specified with -EncodedArguments. + -Command veya -EncodedCommand bağımsız değişkenleri zaten -EncodedArguments ile belirtildiği için komut işlenemiyor. - Cannot process the command because -EncodedArguments requires a value. Specify a value for the -EncodedArguments parameter. + -EncodedArguments bir değer gerektirdiğinden komut işlenemiyor. -EncodedArguments parametresi için bir değer belirtin. - The command cannot be run because the File parameter requires a file path. Supply a path for the File parameter and then try the command again. + File parametresi bir dosya yolu gerektirdiği için komut çalıştırılamıyor. File parametresi için bir yol sağlayın ve ardından komutu yeniden deneyin. - Cannot process the command because -WindowStyle requires an argument that is normal, hidden, minimized or maximized. Specify one of these argument values and try again. + -WindowStyle normal, gizli, simge durumuna küçültülmüş veya büyütülmüş bir değer gerektirdiğinden komut işlenemiyor. Bu değerlerden birini belirtin ve yeniden deneyin. - Processing -File '{0}' failed: {1} Specify a valid path for the -File parameter. + -File '{0}' işlenemedi: {1} -File parametresi için geçerli bir yol belirtin. - Processing -WindowStyle '{0}' failed: {1}. + -WindowStyle '{0}' işlenirken hata oluştu: {1}. - Processing -File '{0}' failed because the file does not have a '.ps1' extension. Specify a valid PowerShell script file name, and then try again. + Dosyanın '.ps1' uzantısı olmadığı için -File '{0}' işlenemedi. Geçerli bir PowerShell betik dosyası adı belirtin ve yeniden deneyin. - The argument '{0}' is not recognized as the name of a script file. Check the spelling of the name, or if a path was included, verify that the path is correct and try again. + '{0}' bağımsız değişkeni bir betik dosyası adı olarak tanınmıyor. Adın yazımını denetleyin veya yol eklenmişse yolun doğru olduğundan emin olun ve yeniden deneyin. - Cannot process the command because the value specified with -EncodedArguments is not properly encoded. The value must be Base64 encoded. + -EncodedArguments ile belirtilen değer doğru şekilde kodlanmadığından komut işlenemiyor. Değer Base64 olarak kodlanmış olmalıdır. - Cannot process the command because the value specified with -EncodedCommand is not properly encoded. The value must be Base64 encoded. + -EncodedCommand ile belirtilen değer doğru şekilde kodlanmadığından komut işlenemiyor. Değer Base64 olarak kodlanmış olmalıdır. - Cannot process the execution policy because of a missing policy name. A policy name must follow -ExecutionPolicy. + İlke adı eksik olduğundan yürütme ilkesi işlenemiyor. -ExecutionPolicy sonrasında bir ilke adı gelmelidir. - Cannot process the command because -STA and -MTA are both specified. Specify either -STA or -MTA. + Hem -STA hem de -MTA belirtildiğinden komut işlenemiyor. -STA veya -MTA komutlarından birini belirtin. - Cannot process the command because -ConfigurationName requires an argument that is a remote endpoint configuration name. Specify this argument and try again. + -ConfigurationName uzak uç nokta yapılandırma adı olan bir bağımsız değişken gerektirdiğinden komut işlenemiyor. Bu bağımsız değişkeni belirtin ve yeniden deneyin. - Cannot process the command because -ConfigurationFile requires an argument that is a session configuration (.pssc) file path. Specify this argument and try again. + -ConfigurationFile bir oturum yapılandırması (.pssc) dosya yolu olan bir bağımsız değişken gerektirdiğinden komut işlenemiyor. Bu bağımsız değişkeni belirtin ve yeniden deneyin. - Cannot process the command because -CustomPipeName requires an argument that is a name of the pipe you want to use. Specify this argument and try again. + -CustomPipeName, kullanmak istediğiniz kanalın adı olan bir bağımsız değişken gerektirdiğinden komut işlenemiyor. Bu bağımsız değişkeni belirtin ve yeniden deneyin. - Cannot process the command because -CustomPipeName specified is too long. Pipe names on this platform can be up to {0} characters long. Your pipe name '{1}' is {2} characters. + Belirtilen -CustomPipeName çok uzun olduğu için komut işlenemiyor. Bu platformdaki kanal adları en fazla {0} karakter uzunluğunda olabilir. Kanal adınız '{1}' {2} karakterdir. - Cannot process the command because -SettingsFile requires an argument that is a file path. + -SettingsFile bir dosya yolu olan bir bağımsız değişken gerektirdiğinden komut işlenemiyor. - Processing -SettingsFile '{0}' failed: {1}. Specify a valid path for the -SettingsFile parameter. + -SettingsFile '{0}' işlenemedi: {1}. -SettingsFile parametresi için geçerli bir yol belirtin. - The argument '{0}' passed to the -SettingsFile does not exist. Provide the path to an existing json file as an argument to the -SettingsFile parameter. + -SettingsFile komutuna geçirilen '{0}' bağımsız değişkeni yok. -SettingsFile parametresi için var olan bir json dosyasının yolunu sağlayın. - Invalid argument '{0}', did you mean: + Geçersiz bağımsız değişken '{0}'. Şunu mu demek istediniz: - Parameter -WindowStyle is not implemented on this platform. + -WindowStyle parametresi bu platformda uygulanmıyor. - Cannot process the command because -WorkingDirectory requires an argument that is a directory path. + -WorkingDirectory bir dizin yolu olan bir bağımsız değişken gerektirdiğinden komut işlenemiyor. - Parameter -MTA is not supported on this platform. + -MTA parametresi bu platformda desteklenmiyor. - Parameter -STA is not supported on this platform. + -STA parametresi bu platformda desteklenmiyor. - The specified arguments must not contain null elements. + Belirtilen bağımsız değişkenler null öğeler içermemelidir. - Invalid ExecutionPolicy value '{0}'. + Geçersiz ExecutionPolicy değeri '{0}'. - An argument is required to be supplied to the '{0}' parameter. + '{0}' parametresi için bir bağımsız değişken sağlanmalıdır. "-File" parametresi ilke tarafından zorunlu kılınıyor. diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/tr/ConsoleHostStrings.tr.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/tr/ConsoleHostStrings.tr.resx index bf7ab57b1a3..9b1f85e4ca2 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/tr/ConsoleHostStrings.tr.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/tr/ConsoleHostStrings.tr.resx @@ -118,74 +118,74 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot display prompt because too many nested prompts are already running. + İstem, çok fazla iç içe istem zaten çalıştığı için görüntülenemiyor. - Cannot process input loop. ExitCurrentLoop was called when no InputLoops were running. + Giriş döngüsü işlenemiyor. ExitCurrentLoop, hiçbir InputLoops çalışmıyorken çağrıldı. PS> - The shell cannot be started. A failure occurred during initialization: + Kabuk başlatılamıyor. Başlatma sırasında bir hata oluştu: - The shell cannot be started. An InitialSessionState object has been provided along with a -ConfigurationFile argument. Both configuration directives cannot be used at the same time. + Kabuk başlatılamıyor. Bir InitialSessionState nesnesi, -ConfigurationFile bağımsız değişkeniyle birlikte sağlanmıştır. Her iki yapılandırma yönergesi aynı anda kullanılamaz. - An error has occurred that was not properly handled. Additional information is shown below. The PowerShell process will exit. + Düzgün şekilde işlenmemiş bir hata oluştu. Ek bilgiler aşağıda gösterilmektedir. Windows PowerShell işlemi çıkacak. ********************** -PowerShell transcript start -Start time: {0:yyyyMMddHHmmss} -Username : {1}\{2} -Machine : {3} ({4}) +Windows PowerShell döküm başlangıcı +Başlangıç saati: {0:yyyyMMddHHmmss} +Kullanıcı adı : {1}\{2} +Makine : {3} ({4}) ********************** ********************** -PowerShell transcript end -End time: {0:yyyyMMddHHmmss} +Windows PowerShell döküm sonu +Bitiş saati: {0:yyyyMMddHHmmss} ********************** - Command '{0}' could not be run because some PowerShell Snap-Ins did not load. + Komut '{0}' çalıştırılamadı çünkü bazı Windows PowerShell Snap-In'leri yüklenmedi. - Command '{0}' was not run as the session in which it was intended to run was either closed or broken + Komut '{0}', çalıştırılmasının amaçlandığı oturum kapalı veya bozuk olduğu için çalıştırılamadı - Entering debug mode. Use h or ? for help. + Hata ayıklama moduna giriliyor. Yardım için h veya ? kullanın. - Hit {0} + İsabet {0} {0}:{1,-3} {2} -The current session does not support debugging; execution will continue. +Geçerli oturum hata ayıklamayı desteklemiyor; yürütme devam edecek. - Cannot load PSReadline module. Console is running without PSReadline. + PSReadline modülü yüklenemiyor. Konsol, PSReadline olmadan çalışıyor. - More than one server mode parameter was specified. Server mode parameters must be used exclusively. + Birden fazla sunucu modu parametresi belirtildi. Sunucu modu parametreleri yalnızca tek başına kullanılmalıdır. - Loading personal and system profiles took {0}ms. + Kişisel ve sistem profillerinin yüklenmesi {0} ms sürdü. - Run as Administrator + Yönetici olarak çalıştır - PushRunspace can only push a remote runspace. + PushRunspace yalnızca uzak bir çalışma alanı gönderebilir. - The '{0}' parameter is mandatory and must be specified when using the '{1}' parameter. + ‘{0}' parametresi zorunludur ve '{1}' parametresi kullanılırken belirtilmelidir. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/tr/TranscriptStrings.tr.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/tr/TranscriptStrings.tr.resx index d23d6495940..dbea49b4bf1 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/tr/TranscriptStrings.tr.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/tr/TranscriptStrings.tr.resx @@ -118,27 +118,27 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Transcript started, output file is {0} + Transkript başlatıldı, çıkış dosyası {0} - Transcript stopped, output file is {0} + Transkript durduruldu, çıkış dosyası {0} - Transcription cannot be started due to the error: {0} + Şu hata nedeniyle transkripsiyon başlatılamadı: {0} - The current provider ({0}) cannot open a file. + Geçerli sağlayıcı ({0}) bir dosyayı açamıyor. - File {0} is read-only. Cannot write to this file. "Start-Transcript -Force" will clear the read-only attribute. + {0} dosyası salt okunur. Bu dosyaya yazılamaz. "Start-Transcript -Force" salt okunur özniteliğini temizler. - Cannot perform operation because the path resolved to more than one file. This command cannot operate on multiple files. + Yol birden fazla dosyaya çözümlendiği için işlem gerçekleştirilemiyor. Bu komut birden fazla dosya üzerinde çalışamaz. - File {0} already exists and {1} was specified. + Dosya {0} zaten var ve {1} belirtildi. - An error occurred stopping transcription: {0} + Transkripsiyon durdurulurken bir hata oluştu: {0} \ No newline at end of file diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hans/CommandLineParameterParserStrings.zh-Hans.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hans/CommandLineParameterParserStrings.zh-Hans.resx index c5a6fc0882c..137c80eb242 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hans/CommandLineParameterParserStrings.zh-Hans.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hans/CommandLineParameterParserStrings.zh-Hans.resx @@ -118,115 +118,115 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot process command because a command is already specified with -Command, -CommandWithArgs, or -EncodedCommand. + 无法处理命令，因为已使用 -Command、-CommandWithArgs 或 -EncodedCommand 指定了命令。 - Cannot process the command because of a missing parameter. A command must follow -Command. + 由于缺少参数，无法处理该命令。命令必须遵循 -Command。 - Unrecognized parameter: '{0}'. + 无法识别的参数: '{0}'。 - '-' was specified with the -Command parameter; no other arguments to -Command are permitted. + '-' 是使用 -Command 参数指定的; 不允许对 -Command 使用任何其他参数。 - '-' was specified as the argument to -Command but standard input has not been redirected for this process. + '-' 被指定为 -Command 的参数，但尚未为此进程重定向标准输入。 - The command cannot be run because no argument has been supplied for the OutputFormat parameter. -Specify one of the following formats for this parameter: + 无法运行该命令，因为没有为 OutputFormat 参数提供任何参数。 +为此参数指定以下格式之一: {0} - Cannot process the command because the -InputFormat parameter requires an argument. Specify a valid format argument for this parameter. -Valid formats are: + 无法处理该命令，因为 -InputFormat 参数需要参数。为此参数指定有效的格式参数。 +有效格式为: {0} - Cannot process the command because of an incorrect parameter value. "{0}" is not a valid format. -Valid formats are: + 无法处理命令，因为参数值不正确。'{0}' 不是有效的格式。 +有效格式为: {1} - Cannot process the command because arguments to -Command or -EncodedCommand have already been specified with -EncodedArguments. + 无法处理该命令，因为已使用 -EncodedArguments 指定了 -Command 或 -EncodedCommand 的参数。 - Cannot process the command because -EncodedArguments requires a value. Specify a value for the -EncodedArguments parameter. + 无法处理该命令，因为 -EncodedArguments 需要一个值。指定 -EncodedArguments 参数的值。 - The command cannot be run because the File parameter requires a file path. Supply a path for the File parameter and then try the command again. + 无法运行该命令，因为 File 参数需要文件路径。提供 File 参数的路径，然后重试该命令。 - Cannot process the command because -WindowStyle requires an argument that is normal, hidden, minimized or maximized. Specify one of these argument values and try again. + 无法处理该命令，因为 -WindowStyle 需要正常、隐藏、最小化或最大化的参数。请指定这些参数值之一，然后重试。 - Processing -File '{0}' failed: {1} Specify a valid path for the -File parameter. + 处理 -File '{0}' 失败: {1} 请为 -File 参数指定有效路径。 - Processing -WindowStyle '{0}' failed: {1}. + 处理 -WindowStyle '{0}' 失败: {1}。 - Processing -File '{0}' failed because the file does not have a '.ps1' extension. Specify a valid PowerShell script file name, and then try again. + 处理 -File '{0}' 失败，因为文件没有 '.ps1' 扩展名。请指定有效的 PowerShell 脚本文件名，然后重试。 - The argument '{0}' is not recognized as the name of a script file. Check the spelling of the name, or if a path was included, verify that the path is correct and try again. + 参数 '{0}' 无法识别为脚本文件名。请检查名称的拼写或验证路径是否正确(如果包含路径)，然后重试。 - Cannot process the command because the value specified with -EncodedArguments is not properly encoded. The value must be Base64 encoded. + 无法处理该命令，因为使用 -EncodedArguments 指定的值未正确编码。该值必须是 Base64 编码的。 - Cannot process the command because the value specified with -EncodedCommand is not properly encoded. The value must be Base64 encoded. + 无法处理该命令，因为使用 -EncodedCommand 指定的值未正确编码。该值必须是 Base64 编码的。 - Cannot process the execution policy because of a missing policy name. A policy name must follow -ExecutionPolicy. + 由于缺少策略名称，无法处理执行策略。策略名称必须遵循 -ExecutionPolicy。 - Cannot process the command because -STA and -MTA are both specified. Specify either -STA or -MTA. + 无法处理该命令，因为同时指定了 -STA 和 -MTA。指定 -STA 或 -MTA。 - Cannot process the command because -ConfigurationName requires an argument that is a remote endpoint configuration name. Specify this argument and try again. + 无法处理该命令，因为 -ConfigurationName 需要一个作为远程终结点配置名称的参数。请指定此参数，然后重试。 - Cannot process the command because -ConfigurationFile requires an argument that is a session configuration (.pssc) file path. Specify this argument and try again. + 无法处理该命令，因为 -ConfigurationFile 需要一个会话配置(.pssc)文件路径作为参数。请指定此参数，然后重试。 - Cannot process the command because -CustomPipeName requires an argument that is a name of the pipe you want to use. Specify this argument and try again. + 无法处理该命令，因为 -CustomPipeName 需要一个参数，该参数是要使用的管道的名称。请指定此参数，然后重试。 - Cannot process the command because -CustomPipeName specified is too long. Pipe names on this platform can be up to {0} characters long. Your pipe name '{1}' is {2} characters. + 无法处理命令，因为指定的 -CustomPipeName 过长。此平台上的管道名称最长可包含 {0} 个字符。管道名称 '{1}' 包含 {2} 个字符。 - Cannot process the command because -SettingsFile requires an argument that is a file path. + 无法处理该命令，因为 -SettingsFile 需要一个作为文件路径的参数。 - Processing -SettingsFile '{0}' failed: {1}. Specify a valid path for the -SettingsFile parameter. + 处理 -SettingsFile '{0}' 失败: {1}。指定 -SettingsFile 参数的有效路径。 - The argument '{0}' passed to the -SettingsFile does not exist. Provide the path to an existing json file as an argument to the -SettingsFile parameter. + 传递给 -SettingsFile 的参数 '{0}' 不存在。请提供现有 json 文件的路径作为 -SettingsFile 参数的值。 - Invalid argument '{0}', did you mean: + 无效的参数 '{0}'，你的意思是否是: - Parameter -WindowStyle is not implemented on this platform. + 参数 -WindowStyle 未在此平台上实现。 - Cannot process the command because -WorkingDirectory requires an argument that is a directory path. + 无法处理该命令，因为 -WorkingDirectory 需要一个作为目录路径的参数。 - Parameter -MTA is not supported on this platform. + 此平台不支持参数 -MTA。 - Parameter -STA is not supported on this platform. + 此平台不支持参数 -STA。 - The specified arguments must not contain null elements. + 指定的参数不能包含 null 元素。 - Invalid ExecutionPolicy value '{0}'. + ExecutionPolicy 值 '{0}' 无效。 - An argument is required to be supplied to the '{0}' parameter. + 必须为 '{0}' 参数提供一个参数。 策略需要参数 '-File'。 diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hans/ConsoleHostStrings.zh-Hans.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hans/ConsoleHostStrings.zh-Hans.resx index bf7ab57b1a3..ae3f6cc7974 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hans/ConsoleHostStrings.zh-Hans.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hans/ConsoleHostStrings.zh-Hans.resx @@ -118,74 +118,74 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot display prompt because too many nested prompts are already running. + 由于已运行的嵌套提示过多，无法显示提示。 - Cannot process input loop. ExitCurrentLoop was called when no InputLoops were running. + 无法处理输入循环。在未运行任何 InputLoop 时调用了 ExitCurrentLoop。 PS> - The shell cannot be started. A failure occurred during initialization: + 无法启动 shell。初始化过程中出错: - The shell cannot be started. An InitialSessionState object has been provided along with a -ConfigurationFile argument. Both configuration directives cannot be used at the same time. + 无法启动 shell。已提供 InitialSessionState 对象和 -ConfigurationFile 参数。不能同时使用这两个配置指令。 - An error has occurred that was not properly handled. Additional information is shown below. The PowerShell process will exit. + 发生了错误且未正确处理。下面显示附加信息。PowerShell 进程将退出。 ********************** -PowerShell transcript start -Start time: {0:yyyyMMddHHmmss} -Username : {1}\{2} -Machine : {3} ({4}) +PowerShell 记录开始 +开始时间: {0:yyyyMMddHHmmss} +用户名: {1}\{2} +计算机 : {3} ({4}) ********************** ********************** -PowerShell transcript end -End time: {0:yyyyMMddHHmmss} +PowerShell 记录结束 +结束时间: {0:yyyyMMddHHmmss} ********************** - Command '{0}' could not be run because some PowerShell Snap-Ins did not load. + 由于某些 PowerShell Snap-In 未加载，因此无法运行命令 "{0}"。 - Command '{0}' was not run as the session in which it was intended to run was either closed or broken + 命令 "{0}" 未运行，因为原本要在其中运行的会话已关闭或损坏 - Entering debug mode. Use h or ? for help. + 输入调试模式。使用 h 或 ？获取帮助。 - Hit {0} + 命中 {0} {0}:{1,-3} {2} -The current session does not support debugging; execution will continue. +当前会话不支持调试，将继续执行。 - Cannot load PSReadline module. Console is running without PSReadline. + 无法加载 PSReadline 模块。 控制台将在不使用 PSReadline 的情况下运行。 - More than one server mode parameter was specified. Server mode parameters must be used exclusively. + 指定了多个服务器模式参数。服务器模式参数必须单独使用。 - Loading personal and system profiles took {0}ms. + 加载个人和系统配置文件耗时 {0} 毫秒。 - Run as Administrator + 以管理员角色运行 - PushRunspace can only push a remote runspace. + PushRunspace 只能推送远程运行空间。 - The '{0}' parameter is mandatory and must be specified when using the '{1}' parameter. + 使用“{1}”参数时，必须指定“{0}”参数。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hans/TranscriptStrings.zh-Hans.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hans/TranscriptStrings.zh-Hans.resx index d23d6495940..fb87f11d9b2 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hans/TranscriptStrings.zh-Hans.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hans/TranscriptStrings.zh-Hans.resx @@ -118,27 +118,27 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Transcript started, output file is {0} + 转录已开始，输出文件为 {0} - Transcript stopped, output file is {0} + 转录已停止，输出文件为 {0} - Transcription cannot be started due to the error: {0} + 由于出现以下错误，无法开始转录: {0} - The current provider ({0}) cannot open a file. + 当前提供程序({0})无法打开文件。 - File {0} is read-only. Cannot write to this file. "Start-Transcript -Force" will clear the read-only attribute. + 文件 {0} 是只读文件。无法写入此文件。"Start-Transcript -Force" 将清除只读属性。 - Cannot perform operation because the path resolved to more than one file. This command cannot operate on multiple files. + 无法执行操作，因为路径解析为多个文件。无法对多个文件执行此命令。 - File {0} already exists and {1} was specified. + 文件 {0} 已存在，且已指定 {1}。 - An error occurred stopping transcription: {0} + 停止转录时出错: {0} \ No newline at end of file diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hant/CommandLineParameterParserStrings.zh-Hant.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hant/CommandLineParameterParserStrings.zh-Hant.resx index c806dd64fab..b42950d38d3 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hant/CommandLineParameterParserStrings.zh-Hant.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hant/CommandLineParameterParserStrings.zh-Hant.resx @@ -118,115 +118,115 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot process command because a command is already specified with -Command, -CommandWithArgs, or -EncodedCommand. + 無法處理命令，因為已使用 -Command、-CommandWithArgs 或 -EncodedCommand 指定命令。 - Cannot process the command because of a missing parameter. A command must follow -Command. + 無法處理命令，因為缺少參數。命令必須接在 -Command 後面。 - Unrecognized parameter: '{0}'. + 無法辨識的參數: '{0}'。 - '-' was specified with the -Command parameter; no other arguments to -Command are permitted. + 已使用 -Command 參數指定 '-'; -Command 不允許其他引數。 - '-' was specified as the argument to -Command but standard input has not been redirected for this process. + 已指定 '-' 作為 -Command 的引數，但此處理序的標準輸入尚未重新導向。 - The command cannot be run because no argument has been supplied for the OutputFormat parameter. -Specify one of the following formats for this parameter: + 無法執行命令，因為未為 OutputFormat 參數提供引數。 +請為此參數指定下列其中一種格式: {0} - Cannot process the command because the -InputFormat parameter requires an argument. Specify a valid format argument for this parameter. -Valid formats are: + 無法處理命令，因為 -InputFormat 參數需要引數。請為此參數指定有效的格式引數。 +有效的格式為: {0} - Cannot process the command because of an incorrect parameter value. "{0}" is not a valid format. -Valid formats are: + 無法處理命令，因為參數值不正確。"{0}" 不是有效的格式。 +有效的格式為: {1} - Cannot process the command because arguments to -Command or -EncodedCommand have already been specified with -EncodedArguments. + 無法處理命令，因為 -Command 或 -EncodedCommand 的引數已透過 -EncodedArguments 指定。 - Cannot process the command because -EncodedArguments requires a value. Specify a value for the -EncodedArguments parameter. + 無法處理命令，因為 -EncodedArguments 需要值。請為 -EncodedArguments 參數指定值。 - The command cannot be run because the File parameter requires a file path. Supply a path for the File parameter and then try the command again. + 無法執行命令，因為 File 參數需要檔案路徑。請為 File 參數提供路徑，然後再試一次。 - Cannot process the command because -WindowStyle requires an argument that is normal, hidden, minimized or maximized. Specify one of these argument values and try again. + 無法處理命令，因為 -WindowStyle 需要 normal、hidden、minimized 或 maximized 的引數。請指定其中一個引數值，然後再試一次。 - Processing -File '{0}' failed: {1} Specify a valid path for the -File parameter. + 處理 -File '{0}' 失敗: {1} 請為 -File 參數指定有效的路徑。 - Processing -WindowStyle '{0}' failed: {1}. + 處理 -WindowStyle '{0}' 時失敗: {1}。 - Processing -File '{0}' failed because the file does not have a '.ps1' extension. Specify a valid PowerShell script file name, and then try again. + 處理 -File '{0}' 失敗，因為檔案沒有 '.ps1' 副檔名。請指定有效的 PowerShell 指令檔名稱，然後再試一次。 - The argument '{0}' is not recognized as the name of a script file. Check the spelling of the name, or if a path was included, verify that the path is correct and try again. + 引數 '{0}' 無法辨識為指令碼檔案名稱。請檢查名稱拼字，如果名稱含有路徑，請確認路徑正確，然後再試一次。 - Cannot process the command because the value specified with -EncodedArguments is not properly encoded. The value must be Base64 encoded. + 無法處理命令，因為以 -EncodedArguments 指定的值未正確編碼。該值必須採用 Base64 編碼。 - Cannot process the command because the value specified with -EncodedCommand is not properly encoded. The value must be Base64 encoded. + 無法處理命令，因為以 -EncodedCommand 指定的值未正確編碼。該值必須採用 Base64 編碼。 - Cannot process the execution policy because of a missing policy name. A policy name must follow -ExecutionPolicy. + 無法處理執行原則，因為缺少原則名稱。原則名稱必須接在 -ExecutionPolicy 後面。 - Cannot process the command because -STA and -MTA are both specified. Specify either -STA or -MTA. + 無法處理命令，因為同時指定了 -STA 和 -MTA。請擇一指定 -STA 或 -MTA。 - Cannot process the command because -ConfigurationName requires an argument that is a remote endpoint configuration name. Specify this argument and try again. + 無法處理命令，因為 -ConfigurationName 需要一個為遠端端點設定名稱的引數。請指定此引數，然後再試一次。 - Cannot process the command because -ConfigurationFile requires an argument that is a session configuration (.pssc) file path. Specify this argument and try again. + 無法處理命令，因為 -ConfigurationFile 需要一個為工作階段設定 (.pssc) 檔案路徑的引數。請指定此引數，然後再試一次。 - Cannot process the command because -CustomPipeName requires an argument that is a name of the pipe you want to use. Specify this argument and try again. + 無法處理命令，因為 -CustomPipeName 需要一個是您所想要使用之管道名稱的引數。請指定此引數，然後再試一次。 - Cannot process the command because -CustomPipeName specified is too long. Pipe names on this platform can be up to {0} characters long. Your pipe name '{1}' is {2} characters. + 無法處理命令，因為指定的 -CustomPipeName 太長。此平台上的管道名稱長度最多可為 {0} 個字元。您的管道名稱 '{1}' 長度為 {2} 個字元。 - Cannot process the command because -SettingsFile requires an argument that is a file path. + 無法處理命令，因為 -SettingsFile 需要一個為檔案路徑的引數。 - Processing -SettingsFile '{0}' failed: {1}. Specify a valid path for the -SettingsFile parameter. + 處理 -SettingsFile '{0}' 失敗: {1}。請為 -SettingsFile 參數指定有效的路徑。 - The argument '{0}' passed to the -SettingsFile does not exist. Provide the path to an existing json file as an argument to the -SettingsFile parameter. + 傳遞給 -SettingsFile 的引數 '{0}' 不存在。請將現有 JSON 檔案的路徑指定為 -SettingsFile 參數的引數。 - Invalid argument '{0}', did you mean: + 引數 '{0}' 無效，您是否指的是: - Parameter -WindowStyle is not implemented on this platform. + 參數 -WindowStyle 未在此平台上實作。 - Cannot process the command because -WorkingDirectory requires an argument that is a directory path. + 無法處理命令，因為 -WorkingDirectory 需要一個目錄路徑作為引數。 - Parameter -MTA is not supported on this platform. + 此平台上不支援參數 -MTA。 - Parameter -STA is not supported on this platform. + 此平台上不支援參數 -STA。 - The specified arguments must not contain null elements. + 指定的引數不得包含 null 元素。 - Invalid ExecutionPolicy value '{0}'. + 無效的 ExecutionPolicy 值 '{0}'。 - An argument is required to be supplied to the '{0}' parameter. + 必須為 '{0}' 參數提供引數。 此原則需要參數 "-File"。 diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hant/ConsoleHostStrings.zh-Hant.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hant/ConsoleHostStrings.zh-Hant.resx index bf7ab57b1a3..1c46f850c27 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hant/ConsoleHostStrings.zh-Hant.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hant/ConsoleHostStrings.zh-Hant.resx @@ -118,74 +118,74 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot display prompt because too many nested prompts are already running. + 無法顯示提示，因為已經執行太多巢狀提示。 - Cannot process input loop. ExitCurrentLoop was called when no InputLoops were running. + 無法處理輸入迴圈。在沒有任何 InputLoops 執行時呼叫了 ExitCurrentLoop。 PS> - The shell cannot be started. A failure occurred during initialization: + 無法啟動殼層。初始化期間發生失敗: - The shell cannot be started. An InitialSessionState object has been provided along with a -ConfigurationFile argument. Both configuration directives cannot be used at the same time. + 無法啟動殼層。已提供 InitialSessionState 物件以及 -ConfigurationFile 引數。這兩個組態指示項無法同時使用。 - An error has occurred that was not properly handled. Additional information is shown below. The PowerShell process will exit. + 發生未妥善處理的錯誤。其他資訊如下。PowerShell 處理序將結束。 ********************** -PowerShell transcript start -Start time: {0:yyyyMMddHHmmss} -Username : {1}\{2} -Machine : {3} ({4}) +PowerShell 文字記錄開始 +開始時間: {0:yyyyMMddHHmmss} +使用者名稱: {1}\{2} +機器: {3} ({4}) ********************** ********************** -PowerShell transcript end -End time: {0:yyyyMMddHHmmss} +PowerShell 文字記錄結束 +結束時間: {0:yyyyMMddHHmmss} ********************** - Command '{0}' could not be run because some PowerShell Snap-Ins did not load. + 無法執行命令 '{0}'，因為某些 PowerShell Snap-In 未載入。 - Command '{0}' was not run as the session in which it was intended to run was either closed or broken + 命令 '{0}' 未執行，因為其原本要執行的工作階段已關閉或中斷 - Entering debug mode. Use h or ? for help. + 正在進入偵錯模式。使用合貨 h 或者 ? 以尋求協助。 - Hit {0} + 點擊 {0} {0}:{1,-3} {2} -The current session does not support debugging; execution will continue. +目前的工作階段不支援偵錯；執行將繼續。 - Cannot load PSReadline module. Console is running without PSReadline. + 無法載入 PSReadline 模組。 主控台將在不使用 PSReadline 的情況下執行。 - More than one server mode parameter was specified. Server mode parameters must be used exclusively. + 指定了多個伺服器模式參數。伺服器模式參數必須專一使用。 - Loading personal and system profiles took {0}ms. + 載入個人和系統設定檔花費了 {0} 毫秒。 - Run as Administrator + 以系統管理員身分執行 - PushRunspace can only push a remote runspace. + PushRunspace 只能推送遠端 Runspace。 - The '{0}' parameter is mandatory and must be specified when using the '{1}' parameter. + '{0}' 參數是必要的，而且在使用 '{1}' 參數時必須指定。 \ No newline at end of file diff --git a/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hant/TranscriptStrings.zh-Hant.resx b/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hant/TranscriptStrings.zh-Hant.resx index d23d6495940..9eb6d492d60 100644 --- a/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hant/TranscriptStrings.zh-Hant.resx +++ b/src/Microsoft.PowerShell.ConsoleHost/resources/zh-Hant/TranscriptStrings.zh-Hant.resx @@ -118,27 +118,27 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Transcript started, output file is {0} + 已開始文字記錄，輸出檔案為 {0} - Transcript stopped, output file is {0} + 已開始文字記錄，輸出檔案為 {0} - Transcription cannot be started due to the error: {0} + 無法啟動謄寫，因為發生錯誤: {0} - The current provider ({0}) cannot open a file. + 目前的提供者 ({0}) 無法開啟檔案。 - File {0} is read-only. Cannot write to this file. "Start-Transcript -Force" will clear the read-only attribute. + 檔案 {0} 是唯讀。無法寫入此檔案。「Start-Transcript -Force」將會清除唯讀屬性。 - Cannot perform operation because the path resolved to more than one file. This command cannot operate on multiple files. + 因為路徑已解析為多個檔案，所以無法執行作業。此命令無法針對多個檔案執行。 - File {0} already exists and {1} was specified. + 檔案 {0} 已經存在，且已指定 {1}。 - An error occurred stopping transcription: {0} + 停止謄寫時發生錯誤: {0} \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Security/resources/de/UtilsStrings.de.resx b/src/Microsoft.PowerShell.Security/resources/de/UtilsStrings.de.resx index bd0a9c5fb84..94333ed91c4 100644 --- a/src/Microsoft.PowerShell.Security/resources/de/UtilsStrings.de.resx +++ b/src/Microsoft.PowerShell.Security/resources/de/UtilsStrings.de.resx @@ -118,42 +118,42 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot digitally sign file because file {0} is smaller than 4 bytes in size. Files must be at least 4 bytes in order to be digitally signed. + Die Datei kann nicht digital signiert werden, da Datei „{0}“ kleiner als 4 Byte ist. Files muss mindestens 4 Byte groß sein, um digital signiert werden zu können. - Cannot perform the operation because it is not supported on the object found in path {0}. + Der Vorgang kann nicht ausgeführt werden, da er für das Objekt im Pfad „{0}“ nicht unterstützt wird. - Cannot get the ACL because the necessary method, GetSecurityDescriptor, does not exist. + Die ACL kann nicht abgerufen werden, da die erforderliche Methode GetSecurityDescriptor nicht vorhanden ist. - Cannot set the ACL because the method that it needs to invoke, SetSecurityDescriptor, does not exist. + Die ACL kann nicht festgelegt werden, da die aufzurufende Methode SetSecurityDescriptor nicht vorhanden ist. - Could not perform operation because an exception was thrown during method invoke. + Der Vorgang konnte nicht ausgeführt werden, da während des Methodenaufrufs eine Ausnahme ausgelöst wurde. - Could not create a SACL with the specified central access policy. + Die SACL konnte nicht mit der angegebenen zentralen Zugriffsrichtlinie erstellt werden. - Could not create an empty SACL. + Eine leere SACL konnte nicht erstellt werden. - Could not enable SeSecurityPrivilege. + SeSecurityPrivilege konnte nicht aktiviert werden. - Could not set central access policy. + Die zentrale Zugriffsrichtlinie konnte nicht festgelegt werden. - ClearCentralAccessPolicy and CentralAccessPolicy parameters cannot be used at the same time. + Die ClearCentralAccessPolicy- und CentralAccessPolicy-Parameter können nicht gleichzeitig verwendet werden. - Central Access Policy identifier or name is not valid. If specifying an identifier, it must begin with S-1-17. If specifying a name, the policy must be applied on the target machine. + Die Kennung oder der Name der zentralen Zugriffsrichtlinie ist ungültig. Wenn eine Kennung angegeben wird, muss sie mit S-1-17 beginnen. Wenn ein Name angegeben wird, muss die Richtlinie auf dem Zielcomputer angewendet werden. - PowerShell credential request + PowerShell-Anmeldeinformationsanforderung - Enter your credentials. + Geben Sie Ihre Anmeldeinformationen ein. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Security/resources/es/UtilsStrings.es.resx b/src/Microsoft.PowerShell.Security/resources/es/UtilsStrings.es.resx index bd0a9c5fb84..184ccca25d7 100644 --- a/src/Microsoft.PowerShell.Security/resources/es/UtilsStrings.es.resx +++ b/src/Microsoft.PowerShell.Security/resources/es/UtilsStrings.es.resx @@ -118,42 +118,42 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot digitally sign file because file {0} is smaller than 4 bytes in size. Files must be at least 4 bytes in order to be digitally signed. + No se puede firmar digitalmente el archivo porque {0} tiene un tamaño inferior a 4 bytes. Los archivos deben tener al menos 4 bytes para poder firmarse digitalmente. - Cannot perform the operation because it is not supported on the object found in path {0}. + No se puede realizar la operación porque no se admite en el objeto encontrado en la ruta de acceso {0}. - Cannot get the ACL because the necessary method, GetSecurityDescriptor, does not exist. + No se puede obtener la ACL porque el método necesario, GetSecurityDescriptor, no existe. - Cannot set the ACL because the method that it needs to invoke, SetSecurityDescriptor, does not exist. + No se puede establecer la ACL porque el método que necesita invocar, SetSecurityDescriptor, no existe. - Could not perform operation because an exception was thrown during method invoke. + No se pudo realizar la operación porque se produjo una excepción durante la invocación del método. - Could not create a SACL with the specified central access policy. + No se pudo crear una SACL con la directiva de acceso central especificada. - Could not create an empty SACL. + No se pudo crear una SACL vacía. - Could not enable SeSecurityPrivilege. + No se pudo habilitar SeSecurityPrivilege. - Could not set central access policy. + No se pudo establecer la directiva de acceso central. - ClearCentralAccessPolicy and CentralAccessPolicy parameters cannot be used at the same time. + Los parámetros ClearCentralAccessPolicy y CentralAccessPolicy no se pueden usar al mismo tiempo. - Central Access Policy identifier or name is not valid. If specifying an identifier, it must begin with S-1-17. If specifying a name, the policy must be applied on the target machine. + El identificador o nombre de la directiva de acceso central no es válido. Si especifica un identificador, debe comenzar con S-1-17. Si se especifica un nombre, la directiva se debe aplicar en el equipo de destino. - PowerShell credential request + Solicitud de credenciales de PowerShell - Enter your credentials. + Escriba sus credenciales. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Security/resources/fr/UtilsStrings.fr.resx b/src/Microsoft.PowerShell.Security/resources/fr/UtilsStrings.fr.resx index bd0a9c5fb84..5b9ce65bf8b 100644 --- a/src/Microsoft.PowerShell.Security/resources/fr/UtilsStrings.fr.resx +++ b/src/Microsoft.PowerShell.Security/resources/fr/UtilsStrings.fr.resx @@ -118,42 +118,42 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot digitally sign file because file {0} is smaller than 4 bytes in size. Files must be at least 4 bytes in order to be digitally signed. + Nous ne pouvons pas signer numériquement le fichier, car le fichier {0} a une taille inférieure à 4 octets. Les fichiers doivent comporter au moins 4 octets pour être signés numériquement. - Cannot perform the operation because it is not supported on the object found in path {0}. + Nous ne pouvons pas effectuer l’opération, car elle n’est pas prise en charge sur l’objet trouvé dans le chemin d’accès {0}. - Cannot get the ACL because the necessary method, GetSecurityDescriptor, does not exist. + Nous ne pouvons pas obtenir la liste de contrôle d’accès, car la méthode nécessaire, GetSecurityDescriptor, n’existe pas. - Cannot set the ACL because the method that it needs to invoke, SetSecurityDescriptor, does not exist. + Nous ne pouvons pas définir la liste de contrôle d’accès, car la méthode SetSecurityDescriptor qu’elle doit appeler n’existe pas. - Could not perform operation because an exception was thrown during method invoke. + Nous ne pouvons pas effectuer l’opération, car une exception a été levée lors de l’appel de la méthode. - Could not create a SACL with the specified central access policy. + Nous n’avons pas pu créer une SACL avec la stratégie d’accès central spécifiée. - Could not create an empty SACL. + Nous n’avons pas pu créer une liste de contrôle d’accès système (SACL) vide. - Could not enable SeSecurityPrivilege. + Nous n’avons pas pu activer SeSecurityPrivilege. - Could not set central access policy. + Nous n’avons pas pu définir la stratégie d’accès central. - ClearCentralAccessPolicy and CentralAccessPolicy parameters cannot be used at the same time. + Vous ne pouvez pas utiliser les paramètres ClearCentralAccessPolicy et CentralAccessPolicy en même temps. - Central Access Policy identifier or name is not valid. If specifying an identifier, it must begin with S-1-17. If specifying a name, the policy must be applied on the target machine. + L’identificateur ou le nom de la stratégie d’accès central n’est pas valide. Si vous spécifiez un identificateur, il doit commencer par S-1-17. Si vous spécifiez un nom, la stratégie doit être appliquée sur la machine cible. - PowerShell credential request + Requête d’informations d’identification PowerShell - Enter your credentials. + Entrez vos informations d’identification. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Security/resources/pl/UtilsStrings.pl.resx b/src/Microsoft.PowerShell.Security/resources/pl/UtilsStrings.pl.resx index bd0a9c5fb84..3b4190e9a02 100644 --- a/src/Microsoft.PowerShell.Security/resources/pl/UtilsStrings.pl.resx +++ b/src/Microsoft.PowerShell.Security/resources/pl/UtilsStrings.pl.resx @@ -118,42 +118,42 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot digitally sign file because file {0} is smaller than 4 bytes in size. Files must be at least 4 bytes in order to be digitally signed. + Nie można podpisać cyfrowo pliku, ponieważ rozmiar pliku {0} jest mniejszy niż 4 bajty. Aby można było podpisać cyfrowo, pliki muszą mieć co najmniej 4 bajty. - Cannot perform the operation because it is not supported on the object found in path {0}. + Nie można wykonać operacji, ponieważ nie jest ona obsługiwana dla obiektu znalezionego w ścieżce {0}. - Cannot get the ACL because the necessary method, GetSecurityDescriptor, does not exist. + Nie można pobrać listy ACL, ponieważ niezbędna metoda GetSecurityDescriptor nie istnieje. - Cannot set the ACL because the method that it needs to invoke, SetSecurityDescriptor, does not exist. + Nie można ustawić listy ACL, ponieważ metoda, którą musi wywołać, SetSecurityDescriptor, nie istnieje. - Could not perform operation because an exception was thrown during method invoke. + Nie można wykonać operacji, ponieważ zgłoszono wyjątek podczas wywoływania metody. - Could not create a SACL with the specified central access policy. + Nie można utworzyć listy SACL z określonymi centralnymi zasadami dostępu. - Could not create an empty SACL. + Nie można utworzyć pustej listy SACL. - Could not enable SeSecurityPrivilege. + Nie można włączyć elementu SeSecurityPrivilege. - Could not set central access policy. + Nie można ustawić centralnych zasad dostępu. - ClearCentralAccessPolicy and CentralAccessPolicy parameters cannot be used at the same time. + Jednocześnie nie można używać parametrów ClearCentralAccessPolicy i CentralAccessPolicy. - Central Access Policy identifier or name is not valid. If specifying an identifier, it must begin with S-1-17. If specifying a name, the policy must be applied on the target machine. + Identyfikator lub nazwa centralnych zasad dostępu jest nieprawidłowa. Jeśli określono identyfikator, musi on zaczynać się od S-1-17. W przypadku określenia nazwy, zasady muszą zostać zastosowane na maszynie docelowej. - PowerShell credential request + Żądanie poświadczeń programu PowerShell - Enter your credentials. + Wprowadź poświadczenia. \ No newline at end of file diff --git a/src/Microsoft.PowerShell.Security/resources/tr/UtilsStrings.tr.resx b/src/Microsoft.PowerShell.Security/resources/tr/UtilsStrings.tr.resx index bd0a9c5fb84..fde41a54433 100644 --- a/src/Microsoft.PowerShell.Security/resources/tr/UtilsStrings.tr.resx +++ b/src/Microsoft.PowerShell.Security/resources/tr/UtilsStrings.tr.resx @@ -118,42 +118,42 @@ System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - Cannot digitally sign file because file {0} is smaller than 4 bytes in size. Files must be at least 4 bytes in order to be digitally signed. + {0} dosyasının boyutu 4 bayttan küçük olduğundan dosya dijital olarak imzalanamıyor. Dosyaların dijital olarak imzalanabilmesi için en az 4 bayt olması gerekir. - Cannot perform the operation because it is not supported on the object found in path {0}. + İşlem, {0} yolunda bulunan nesnede desteklenmediğinden gerçekleştirilemiyor. - Cannot get the ACL because the necessary method, GetSecurityDescriptor, does not exist. + Gerekli GetSecurityDescriptor yöntemi mevcut olmadığından ACL alınamıyor. - Cannot set the ACL because the method that it needs to invoke, SetSecurityDescriptor, does not exist. + Çağrılması gereken SetSecurityDescriptor yöntemi mevcut olmadığından ACL ayarlanamıyor. - Could not perform operation because an exception was thrown during method invoke. + Yöntem çağrısı sırasında özel durum oluştuğundan işlem gerçekleştirilemedi. - Could not create a SACL with the specified central access policy. + Belirtilen merkezi erişim ilkesiyle bir SACL oluşturulamadı. - Could not create an empty SACL. + Boş bir SACL oluşturulamadı. - Could not enable SeSecurityPrivilege. + SeSecurityPrivilege etkinleştirilemedi. - Could not set central access policy. + Merkezi erişim ilkesi ayarlanamadı. - ClearCentralAccessPolicy and CentralAccessPolicy parameters cannot be used at the same time. + ClearCentralAccessPolicy ve CentralAccessPolicy parametreleri aynı anda kullanılamaz. - Central Access Policy identifier or name is not valid. If specifying an identifier, it must begin with S-1-17. If specifying a name, the policy must be applied on the target machine. + Merkezi erişim ilkesi tanımlayıcısı veya adı geçerli değil. Tanımlayıcı belirtiyorsanız S-1-17 ile başlamalıdır. Ad belirtiyorsanız ilke hedef makineye uygulanmalıdır. - PowerShell credential request + PowerShell kimlik bilgisi isteği - Enter your credentials. + Kimlik bilgilerinizi girin. \ No newline at end of file