1/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
2/* Copyright (c) 2022/23 Siemens Mobility GmbH */
3#ifndef _LINUX_GSMMUX_H
4#define _LINUX_GSMMUX_H
5
6#include <linux/const.h>
7#include <linux/if.h>
8#include <linux/ioctl.h>
9#include <linux/types.h>
10
11/*
12 * flags definition for n_gsm
13 *
14 * Used by:
15 * struct gsm_config_ext.flags
16 * struct gsm_dlci_config.flags
17 */
18/* Forces a DLCI reset if set. Otherwise, a DLCI reset is only done if
19 * incompatible settings were provided. Always cleared on retrieval.
20 */
21#define GSM_FL_RESTART _BITUL(0)
22
23/**
24 * struct gsm_config - n_gsm basic configuration parameters
25 *
26 * This structure is used in combination with GSMIOC_GETCONF and GSMIOC_SETCONF
27 * to retrieve and set the basic parameters of an n_gsm ldisc.
28 * struct gsm_config_ext can be used to configure extended ldisc parameters.
29 *
30 * All timers are in units of 1/100th of a second.
31 *
32 * @adaption: Convergence layer type
33 * @encapsulation: Framing (0 = basic option, 1 = advanced option)
34 * @initiator: Initiator or responder
35 * @t1: Acknowledgment timer
36 * @t2: Response timer for multiplexer control channel
37 * @t3: Response timer for wake-up procedure
38 * @n2: Maximum number of retransmissions
39 * @mru: Maximum incoming frame payload size
40 * @mtu: Maximum outgoing frame payload size
41 * @k: Window size
42 * @i: Frame type (1 = UIH, 2 = UI)
43 * @unused: Can not be used
44 */
45struct gsm_config
46{
47 unsigned int adaption;
48 unsigned int encapsulation;
49 unsigned int initiator;
50 unsigned int t1;
51 unsigned int t2;
52 unsigned int t3;
53 unsigned int n2;
54 unsigned int mru;
55 unsigned int mtu;
56 unsigned int k;
57 unsigned int i;
58 unsigned int unused[8];
59};
60
61#define GSMIOC_GETCONF _IOR('G', 0, struct gsm_config)
62#define GSMIOC_SETCONF _IOW('G', 1, struct gsm_config)
63
64/**
65 * struct gsm_netconfig - n_gsm network configuration parameters
66 *
67 * This structure is used in combination with GSMIOC_ENABLE_NET and
68 * GSMIOC_DISABLE_NET to enable or disable a network data connection
69 * over a mux virtual tty channel. This is for modems that support
70 * data connections with raw IP frames instead of PPP.
71 *
72 * @adaption: Adaption to use in network mode.
73 * @protocol: Protocol to use - only ETH_P_IP supported.
74 * @unused2: Can not be used.
75 * @if_name: Interface name format string.
76 * @unused: Can not be used.
77 */
78struct gsm_netconfig {
79 unsigned int adaption;
80 unsigned short protocol;
81 unsigned short unused2;
82 char if_name[IFNAMSIZ];
83 __u8 unused[28];
84};
85
86#define GSMIOC_ENABLE_NET _IOW('G', 2, struct gsm_netconfig)
87#define GSMIOC_DISABLE_NET _IO('G', 3)
88
89/* get the base tty number for a configured gsmmux tty */
90#define GSMIOC_GETFIRST _IOR('G', 4, __u32)
91
92/**
93 * struct gsm_config_ext - n_gsm extended configuration parameters
94 *
95 * This structure is used in combination with GSMIOC_GETCONF_EXT and
96 * GSMIOC_SETCONF_EXT to retrieve and set the extended parameters of an
97 * n_gsm ldisc.
98 *
99 * All timers are in units of 1/100th of a second.
100 *
101 * @keep_alive: Control channel keep-alive in 1/100th of a second (0 to disable).
102 * @wait_config: Wait for DLCI config before opening virtual link?
103 * @flags: Mux specific flags.
104 * @reserved: For future use, must be initialized to zero.
105 */
106struct gsm_config_ext {
107 __u32 keep_alive;
108 __u32 wait_config;
109 __u32 flags;
110 __u32 reserved[5];
111};
112
113#define GSMIOC_GETCONF_EXT _IOR('G', 5, struct gsm_config_ext)
114#define GSMIOC_SETCONF_EXT _IOW('G', 6, struct gsm_config_ext)
115
116/**
117 * struct gsm_dlci_config - n_gsm channel configuration parameters
118 *
119 * This structure is used in combination with GSMIOC_GETCONF_DLCI and
120 * GSMIOC_SETCONF_DLCI to retrieve and set the channel specific parameters
121 * of an n_gsm ldisc.
122 *
123 * Set the channel accordingly before calling GSMIOC_GETCONF_DLCI.
124 *
125 * @channel: DLCI (0 for the associated DLCI).
126 * @adaption: Convergence layer type.
127 * @mtu: Maximum transfer unit.
128 * @priority: Priority (0 for default value).
129 * @i: Frame type (1 = UIH, 2 = UI).
130 * @k: Window size (0 for default value).
131 * @flags: DLCI specific flags.
132 * @reserved: For future use, must be initialized to zero.
133 */
134struct gsm_dlci_config {
135 __u32 channel;
136 __u32 adaption;
137 __u32 mtu;
138 __u32 priority;
139 __u32 i;
140 __u32 k;
141 __u32 flags;
142 __u32 reserved[7];
143};
144
145#define GSMIOC_GETCONF_DLCI _IOWR('G', 7, struct gsm_dlci_config)
146#define GSMIOC_SETCONF_DLCI _IOW('G', 8, struct gsm_dlci_config)
147
148#endif
149

source code of linux/include/uapi/linux/gsmmux.h