| 1 | /* SPDX-License-Identifier: GPL-2.0 */ |
| 2 | /* |
| 3 | * Driver for the Synopsys DesignWare DMA Controller |
| 4 | * |
| 5 | * Copyright (C) 2007 Atmel Corporation |
| 6 | * Copyright (C) 2010-2011 ST Microelectronics |
| 7 | */ |
| 8 | #ifndef _PLATFORM_DATA_DMA_DW_H |
| 9 | #define _PLATFORM_DATA_DMA_DW_H |
| 10 | |
| 11 | #include <linux/bits.h> |
| 12 | #include <linux/types.h> |
| 13 | |
| 14 | #define DW_DMA_MAX_NR_MASTERS 4 |
| 15 | #define DW_DMA_MAX_NR_CHANNELS 8 |
| 16 | #define DW_DMA_MIN_BURST 1 |
| 17 | #define DW_DMA_MAX_BURST 256 |
| 18 | |
| 19 | struct device; |
| 20 | |
| 21 | /** |
| 22 | * struct dw_dma_slave - Controller-specific information about a slave |
| 23 | * |
| 24 | * @dma_dev: required DMA master device |
| 25 | * @src_id: src request line |
| 26 | * @dst_id: dst request line |
| 27 | * @m_master: memory master for transfers on allocated channel |
| 28 | * @p_master: peripheral master for transfers on allocated channel |
| 29 | * @channels: mask of the channels permitted for allocation (zero value means any) |
| 30 | * @hs_polarity:set active low polarity of handshake interface |
| 31 | */ |
| 32 | struct dw_dma_slave { |
| 33 | struct device *dma_dev; |
| 34 | u8 src_id; |
| 35 | u8 dst_id; |
| 36 | u8 m_master; |
| 37 | u8 p_master; |
| 38 | u8 channels; |
| 39 | bool hs_polarity; |
| 40 | }; |
| 41 | |
| 42 | /** |
| 43 | * struct dw_dma_platform_data - Controller configuration parameters |
| 44 | * @nr_masters: Number of AHB masters supported by the controller |
| 45 | * @nr_channels: Number of channels supported by hardware (max 8) |
| 46 | * @chan_allocation_order: Allocate channels starting from 0 or 7 |
| 47 | * @chan_priority: Set channel priority increasing from 0 to 7 or 7 to 0. |
| 48 | * @block_size: Maximum block size supported by the controller |
| 49 | * @data_width: Maximum data width supported by hardware per AHB master |
| 50 | * (in bytes, power of 2) |
| 51 | * @multi_block: Multi block transfers supported by hardware per channel. |
| 52 | * @max_burst: Maximum value of burst transaction size supported by hardware |
| 53 | * per channel (in units of CTL.SRC_TR_WIDTH/CTL.DST_TR_WIDTH). |
| 54 | * @protctl: Protection control signals setting per channel. |
| 55 | * @quirks: Optional platform quirks. |
| 56 | */ |
| 57 | struct dw_dma_platform_data { |
| 58 | u32 nr_masters; |
| 59 | u32 nr_channels; |
| 60 | #define CHAN_ALLOCATION_ASCENDING 0 /* zero to seven */ |
| 61 | #define CHAN_ALLOCATION_DESCENDING 1 /* seven to zero */ |
| 62 | u32 chan_allocation_order; |
| 63 | #define CHAN_PRIORITY_ASCENDING 0 /* chan0 highest */ |
| 64 | #define CHAN_PRIORITY_DESCENDING 1 /* chan7 highest */ |
| 65 | u32 chan_priority; |
| 66 | u32 block_size; |
| 67 | u32 data_width[DW_DMA_MAX_NR_MASTERS]; |
| 68 | u32 multi_block[DW_DMA_MAX_NR_CHANNELS]; |
| 69 | u32 max_burst[DW_DMA_MAX_NR_CHANNELS]; |
| 70 | #define CHAN_PROTCTL_PRIVILEGED BIT(0) |
| 71 | #define CHAN_PROTCTL_BUFFERABLE BIT(1) |
| 72 | #define CHAN_PROTCTL_CACHEABLE BIT(2) |
| 73 | #define CHAN_PROTCTL_MASK GENMASK(2, 0) |
| 74 | u32 protctl; |
| 75 | #define DW_DMA_QUIRK_XBAR_PRESENT BIT(0) |
| 76 | u32 quirks; |
| 77 | }; |
| 78 | |
| 79 | #endif /* _PLATFORM_DATA_DMA_DW_H */ |
| 80 | |