| 1 | // SPDX-License-Identifier: GPL-2.0-only |
| 2 | /* |
| 3 | * Freescale i.MX Frame Buffer device driver |
| 4 | * |
| 5 | * Copyright (C) 2004 Sascha Hauer, Pengutronix |
| 6 | * Based on acornfb.c Copyright (C) Russell King. |
| 7 | * |
| 8 | * Please direct your questions and comments on this driver to the following |
| 9 | * email address: |
| 10 | * |
| 11 | * linux-arm-kernel@lists.arm.linux.org.uk |
| 12 | */ |
| 13 | |
| 14 | #include <linux/module.h> |
| 15 | #include <linux/kernel.h> |
| 16 | #include <linux/errno.h> |
| 17 | #include <linux/string.h> |
| 18 | #include <linux/interrupt.h> |
| 19 | #include <linux/slab.h> |
| 20 | #include <linux/mm.h> |
| 21 | #include <linux/fb.h> |
| 22 | #include <linux/delay.h> |
| 23 | #include <linux/init.h> |
| 24 | #include <linux/ioport.h> |
| 25 | #include <linux/cpufreq.h> |
| 26 | #include <linux/clk.h> |
| 27 | #include <linux/platform_device.h> |
| 28 | #include <linux/dma-mapping.h> |
| 29 | #include <linux/io.h> |
| 30 | #include <linux/lcd.h> |
| 31 | #include <linux/math64.h> |
| 32 | #include <linux/of.h> |
| 33 | #include <linux/of_device.h> |
| 34 | #include <linux/bitfield.h> |
| 35 | |
| 36 | #include <linux/regulator/consumer.h> |
| 37 | |
| 38 | #include <video/of_display_timing.h> |
| 39 | #include <video/of_videomode.h> |
| 40 | #include <video/videomode.h> |
| 41 | |
| 42 | struct imx_fb_videomode { |
| 43 | struct fb_videomode mode; |
| 44 | u32 pcr; |
| 45 | bool aus_mode; |
| 46 | unsigned char bpp; |
| 47 | }; |
| 48 | |
| 49 | /* |
| 50 | * Complain if VAR is out of range. |
| 51 | */ |
| 52 | #define DEBUG_VAR 1 |
| 53 | |
| 54 | #define DRIVER_NAME "imx-fb" |
| 55 | |
| 56 | #define LCDC_SSA 0x00 |
| 57 | |
| 58 | #define LCDC_SIZE 0x04 |
| 59 | #define SIZE_XMAX_MASK GENMASK(25, 20) |
| 60 | |
| 61 | #define YMAX_MASK_IMX1 GENMASK(8, 0) |
| 62 | #define YMAX_MASK_IMX21 GENMASK(9, 0) |
| 63 | |
| 64 | #define LCDC_VPW 0x08 |
| 65 | #define VPW_VPW_MASK GENMASK(9, 0) |
| 66 | |
| 67 | #define LCDC_CPOS 0x0C |
| 68 | #define CPOS_CC1 BIT(31) |
| 69 | #define CPOS_CC0 BIT(30) |
| 70 | #define CPOS_OP BIT(28) |
| 71 | #define CPOS_CXP_MASK GENMASK(25, 16) |
| 72 | |
| 73 | #define LCDC_LCWHB 0x10 |
| 74 | #define LCWHB_BK_EN BIT(31) |
| 75 | #define LCWHB_CW_MASK GENMASK(28, 24) |
| 76 | #define LCWHB_CH_MASK GENMASK(20, 16) |
| 77 | #define LCWHB_BD_MASK GENMASK(7, 0) |
| 78 | |
| 79 | #define LCDC_LCHCC 0x14 |
| 80 | |
| 81 | #define LCDC_PCR 0x18 |
| 82 | #define PCR_TFT BIT(31) |
| 83 | #define PCR_COLOR BIT(30) |
| 84 | #define PCR_BPIX_MASK GENMASK(27, 25) |
| 85 | #define PCR_BPIX_8 3 |
| 86 | #define PCR_BPIX_12 4 |
| 87 | #define PCR_BPIX_16 5 |
| 88 | #define PCR_BPIX_18 6 |
| 89 | #define PCR_PCD_MASK GENMASK(5, 0) |
| 90 | |
| 91 | #define LCDC_HCR 0x1C |
| 92 | #define HCR_H_WIDTH_MASK GENMASK(31, 26) |
| 93 | #define HCR_H_WAIT_1_MASK GENMASK(15, 8) |
| 94 | #define HCR_H_WAIT_2_MASK GENMASK(7, 0) |
| 95 | |
| 96 | #define LCDC_VCR 0x20 |
| 97 | #define VCR_V_WIDTH_MASK GENMASK(31, 26) |
| 98 | #define VCR_V_WAIT_1_MASK GENMASK(15, 8) |
| 99 | #define VCR_V_WAIT_2_MASK GENMASK(7, 0) |
| 100 | |
| 101 | #define LCDC_POS 0x24 |
| 102 | #define POS_POS_MASK GENMASK(4, 0) |
| 103 | |
| 104 | #define LCDC_LSCR1 0x28 |
| 105 | /* bit fields in imxfb.h */ |
| 106 | |
| 107 | #define LCDC_PWMR 0x2C |
| 108 | /* bit fields in imxfb.h */ |
| 109 | |
| 110 | #define LCDC_DMACR 0x30 |
| 111 | /* bit fields in imxfb.h */ |
| 112 | |
| 113 | #define LCDC_RMCR 0x34 |
| 114 | |
| 115 | #define RMCR_LCDC_EN_MX1 BIT(1) |
| 116 | |
| 117 | #define RMCR_SELF_REF BIT(0) |
| 118 | |
| 119 | #define LCDC_LCDICR 0x38 |
| 120 | #define LCDICR_INT_SYN BIT(2) |
| 121 | #define LCDICR_INT_CON BIT(0) |
| 122 | |
| 123 | #define LCDC_LCDISR 0x40 |
| 124 | #define LCDISR_UDR_ERR BIT(3) |
| 125 | #define LCDISR_ERR_RES BIT(2) |
| 126 | #define LCDISR_EOF BIT(1) |
| 127 | #define LCDISR_BOF BIT(0) |
| 128 | |
| 129 | #define IMXFB_LSCR1_DEFAULT 0x00120300 |
| 130 | |
| 131 | #define LCDC_LAUSCR 0x80 |
| 132 | #define LAUSCR_AUS_MODE BIT(31) |
| 133 | |
| 134 | /* Used fb-mode. Can be set on kernel command line, therefore file-static. */ |
| 135 | static const char *fb_mode; |
| 136 | |
| 137 | /* |
| 138 | * These are the bitfields for each |
| 139 | * display depth that we support. |
| 140 | */ |
| 141 | struct imxfb_rgb { |
| 142 | struct fb_bitfield red; |
| 143 | struct fb_bitfield green; |
| 144 | struct fb_bitfield blue; |
| 145 | struct fb_bitfield transp; |
| 146 | }; |
| 147 | |
| 148 | enum imxfb_type { |
| 149 | IMX1_FB, |
| 150 | IMX21_FB, |
| 151 | }; |
| 152 | |
| 153 | enum imxfb_panel_type { |
| 154 | PANEL_TYPE_MONOCHROME, |
| 155 | PANEL_TYPE_CSTN, |
| 156 | PANEL_TYPE_TFT, |
| 157 | }; |
| 158 | |
| 159 | struct imxfb_info { |
| 160 | struct platform_device *pdev; |
| 161 | void __iomem *regs; |
| 162 | struct clk *clk_ipg; |
| 163 | struct clk *clk_ahb; |
| 164 | struct clk *clk_per; |
| 165 | enum imxfb_type devtype; |
| 166 | enum imxfb_panel_type panel_type; |
| 167 | bool enabled; |
| 168 | |
| 169 | /* |
| 170 | * These are the addresses we mapped |
| 171 | * the framebuffer memory region to. |
| 172 | */ |
| 173 | dma_addr_t map_dma; |
| 174 | u_int map_size; |
| 175 | |
| 176 | u_int palette_size; |
| 177 | |
| 178 | dma_addr_t dbar1; |
| 179 | dma_addr_t dbar2; |
| 180 | |
| 181 | u_int pcr; |
| 182 | u_int lauscr; |
| 183 | u_int pwmr; |
| 184 | u_int lscr1; |
| 185 | u_int dmacr; |
| 186 | bool cmap_inverse; |
| 187 | bool cmap_static; |
| 188 | |
| 189 | struct imx_fb_videomode *mode; |
| 190 | int num_modes; |
| 191 | |
| 192 | struct regulator *lcd_pwr; |
| 193 | int lcd_pwr_enabled; |
| 194 | }; |
| 195 | |
| 196 | static const struct platform_device_id imxfb_devtype[] = { |
| 197 | { |
| 198 | .name = "imx1-fb" , |
| 199 | .driver_data = IMX1_FB, |
| 200 | }, { |
| 201 | .name = "imx21-fb" , |
| 202 | .driver_data = IMX21_FB, |
| 203 | }, { |
| 204 | /* sentinel */ |
| 205 | } |
| 206 | }; |
| 207 | MODULE_DEVICE_TABLE(platform, imxfb_devtype); |
| 208 | |
| 209 | static const struct of_device_id imxfb_of_dev_id[] = { |
| 210 | { |
| 211 | .compatible = "fsl,imx1-fb" , |
| 212 | .data = &imxfb_devtype[IMX1_FB], |
| 213 | }, { |
| 214 | .compatible = "fsl,imx21-fb" , |
| 215 | .data = &imxfb_devtype[IMX21_FB], |
| 216 | }, { |
| 217 | /* sentinel */ |
| 218 | } |
| 219 | }; |
| 220 | MODULE_DEVICE_TABLE(of, imxfb_of_dev_id); |
| 221 | |
| 222 | static inline int is_imx1_fb(struct imxfb_info *fbi) |
| 223 | { |
| 224 | return fbi->devtype == IMX1_FB; |
| 225 | } |
| 226 | |
| 227 | #define IMX_NAME "IMX" |
| 228 | |
| 229 | /* |
| 230 | * Minimum X and Y resolutions |
| 231 | */ |
| 232 | #define MIN_XRES 64 |
| 233 | #define MIN_YRES 64 |
| 234 | |
| 235 | /* Actually this really is 18bit support, the lowest 2 bits of each colour |
| 236 | * are unused in hardware. We claim to have 24bit support to make software |
| 237 | * like X work, which does not support 18bit. |
| 238 | */ |
| 239 | static struct imxfb_rgb def_rgb_18 = { |
| 240 | .red = {.offset = 16, .length = 8,}, |
| 241 | .green = {.offset = 8, .length = 8,}, |
| 242 | .blue = {.offset = 0, .length = 8,}, |
| 243 | .transp = {.offset = 0, .length = 0,}, |
| 244 | }; |
| 245 | |
| 246 | static struct imxfb_rgb def_rgb_16_tft = { |
| 247 | .red = {.offset = 11, .length = 5,}, |
| 248 | .green = {.offset = 5, .length = 6,}, |
| 249 | .blue = {.offset = 0, .length = 5,}, |
| 250 | .transp = {.offset = 0, .length = 0,}, |
| 251 | }; |
| 252 | |
| 253 | static struct imxfb_rgb def_rgb_16_stn = { |
| 254 | .red = {.offset = 8, .length = 4,}, |
| 255 | .green = {.offset = 4, .length = 4,}, |
| 256 | .blue = {.offset = 0, .length = 4,}, |
| 257 | .transp = {.offset = 0, .length = 0,}, |
| 258 | }; |
| 259 | |
| 260 | static struct imxfb_rgb def_rgb_8 = { |
| 261 | .red = {.offset = 0, .length = 8,}, |
| 262 | .green = {.offset = 0, .length = 8,}, |
| 263 | .blue = {.offset = 0, .length = 8,}, |
| 264 | .transp = {.offset = 0, .length = 0,}, |
| 265 | }; |
| 266 | |
| 267 | static int imxfb_activate_var(struct fb_var_screeninfo *var, |
| 268 | struct fb_info *info); |
| 269 | |
| 270 | static inline u_int chan_to_field(u_int chan, struct fb_bitfield *bf) |
| 271 | { |
| 272 | chan &= 0xffff; |
| 273 | chan >>= 16 - bf->length; |
| 274 | return chan << bf->offset; |
| 275 | } |
| 276 | |
| 277 | static int imxfb_setpalettereg(u_int regno, u_int red, u_int green, u_int blue, |
| 278 | u_int trans, struct fb_info *info) |
| 279 | { |
| 280 | struct imxfb_info *fbi = info->par; |
| 281 | u_int val, ret = 1; |
| 282 | |
| 283 | #define CNVT_TOHW(val, width) ((((val)<<(width))+0x7FFF-(val))>>16) |
| 284 | if (regno < fbi->palette_size) { |
| 285 | val = (CNVT_TOHW(red, 4) << 8) | |
| 286 | (CNVT_TOHW(green, 4) << 4) | |
| 287 | CNVT_TOHW(blue, 4); |
| 288 | |
| 289 | writel(val, addr: fbi->regs + 0x800 + (regno << 2)); |
| 290 | ret = 0; |
| 291 | } |
| 292 | return ret; |
| 293 | } |
| 294 | |
| 295 | static int imxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, |
| 296 | u_int trans, struct fb_info *info) |
| 297 | { |
| 298 | struct imxfb_info *fbi = info->par; |
| 299 | unsigned int val; |
| 300 | int ret = 1; |
| 301 | |
| 302 | /* |
| 303 | * If inverse mode was selected, invert all the colours |
| 304 | * rather than the register number. The register number |
| 305 | * is what you poke into the framebuffer to produce the |
| 306 | * colour you requested. |
| 307 | */ |
| 308 | if (fbi->cmap_inverse) { |
| 309 | red = 0xffff - red; |
| 310 | green = 0xffff - green; |
| 311 | blue = 0xffff - blue; |
| 312 | } |
| 313 | |
| 314 | /* |
| 315 | * If greyscale is true, then we convert the RGB value |
| 316 | * to greyscale no mater what visual we are using. |
| 317 | */ |
| 318 | if (info->var.grayscale) |
| 319 | red = green = blue = (19595 * red + 38470 * green + |
| 320 | 7471 * blue) >> 16; |
| 321 | |
| 322 | switch (info->fix.visual) { |
| 323 | case FB_VISUAL_TRUECOLOR: |
| 324 | /* |
| 325 | * 12 or 16-bit True Colour. We encode the RGB value |
| 326 | * according to the RGB bitfield information. |
| 327 | */ |
| 328 | if (regno < 16) { |
| 329 | u32 *pal = info->pseudo_palette; |
| 330 | |
| 331 | val = chan_to_field(chan: red, bf: &info->var.red); |
| 332 | val |= chan_to_field(chan: green, bf: &info->var.green); |
| 333 | val |= chan_to_field(chan: blue, bf: &info->var.blue); |
| 334 | |
| 335 | pal[regno] = val; |
| 336 | ret = 0; |
| 337 | } |
| 338 | break; |
| 339 | |
| 340 | case FB_VISUAL_STATIC_PSEUDOCOLOR: |
| 341 | case FB_VISUAL_PSEUDOCOLOR: |
| 342 | ret = imxfb_setpalettereg(regno, red, green, blue, trans, info); |
| 343 | break; |
| 344 | } |
| 345 | |
| 346 | return ret; |
| 347 | } |
| 348 | |
| 349 | static const struct imx_fb_videomode *imxfb_find_mode(struct imxfb_info *fbi) |
| 350 | { |
| 351 | struct imx_fb_videomode *m; |
| 352 | int i; |
| 353 | |
| 354 | if (!fb_mode) |
| 355 | return &fbi->mode[0]; |
| 356 | |
| 357 | for (i = 0, m = &fbi->mode[0]; i < fbi->num_modes; i++, m++) { |
| 358 | if (!strcmp(m->mode.name, fb_mode)) |
| 359 | return m; |
| 360 | } |
| 361 | return NULL; |
| 362 | } |
| 363 | |
| 364 | /* |
| 365 | * imxfb_check_var(): |
| 366 | * Round up in the following order: bits_per_pixel, xres, |
| 367 | * yres, xres_virtual, yres_virtual, xoffset, yoffset, grayscale, |
| 368 | * bitfields, horizontal timing, vertical timing. |
| 369 | */ |
| 370 | static int imxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) |
| 371 | { |
| 372 | struct imxfb_info *fbi = info->par; |
| 373 | struct imxfb_rgb *rgb; |
| 374 | const struct imx_fb_videomode *imxfb_mode; |
| 375 | unsigned long lcd_clk; |
| 376 | unsigned long long tmp; |
| 377 | u32 pcr = 0; |
| 378 | |
| 379 | if (var->xres < MIN_XRES) |
| 380 | var->xres = MIN_XRES; |
| 381 | if (var->yres < MIN_YRES) |
| 382 | var->yres = MIN_YRES; |
| 383 | |
| 384 | imxfb_mode = imxfb_find_mode(fbi); |
| 385 | if (!imxfb_mode) |
| 386 | return -EINVAL; |
| 387 | |
| 388 | var->xres = imxfb_mode->mode.xres; |
| 389 | var->yres = imxfb_mode->mode.yres; |
| 390 | var->bits_per_pixel = imxfb_mode->bpp; |
| 391 | var->pixclock = imxfb_mode->mode.pixclock; |
| 392 | var->hsync_len = imxfb_mode->mode.hsync_len; |
| 393 | var->left_margin = imxfb_mode->mode.left_margin; |
| 394 | var->right_margin = imxfb_mode->mode.right_margin; |
| 395 | var->vsync_len = imxfb_mode->mode.vsync_len; |
| 396 | var->upper_margin = imxfb_mode->mode.upper_margin; |
| 397 | var->lower_margin = imxfb_mode->mode.lower_margin; |
| 398 | var->sync = imxfb_mode->mode.sync; |
| 399 | var->xres_virtual = max(var->xres_virtual, var->xres); |
| 400 | var->yres_virtual = max(var->yres_virtual, var->yres); |
| 401 | |
| 402 | pr_debug("var->bits_per_pixel=%d\n" , var->bits_per_pixel); |
| 403 | |
| 404 | lcd_clk = clk_get_rate(clk: fbi->clk_per); |
| 405 | |
| 406 | tmp = var->pixclock * (unsigned long long)lcd_clk; |
| 407 | |
| 408 | do_div(tmp, 1000000); |
| 409 | |
| 410 | if (do_div(tmp, 1000000) > 500000) |
| 411 | tmp++; |
| 412 | |
| 413 | pcr = (unsigned int)tmp; |
| 414 | |
| 415 | if (--pcr > PCR_PCD_MASK) { |
| 416 | pcr = PCR_PCD_MASK; |
| 417 | dev_warn(&fbi->pdev->dev, "Must limit pixel clock to %luHz\n" , |
| 418 | lcd_clk / pcr); |
| 419 | } |
| 420 | |
| 421 | switch (var->bits_per_pixel) { |
| 422 | case 32: |
| 423 | pcr |= FIELD_PREP(PCR_BPIX_MASK, PCR_BPIX_18); |
| 424 | rgb = &def_rgb_18; |
| 425 | break; |
| 426 | case 16: |
| 427 | default: |
| 428 | if (is_imx1_fb(fbi)) |
| 429 | pcr |= FIELD_PREP(PCR_BPIX_MASK, PCR_BPIX_12); |
| 430 | else |
| 431 | pcr |= FIELD_PREP(PCR_BPIX_MASK, PCR_BPIX_16); |
| 432 | |
| 433 | if (imxfb_mode->pcr & PCR_TFT) |
| 434 | rgb = &def_rgb_16_tft; |
| 435 | else |
| 436 | rgb = &def_rgb_16_stn; |
| 437 | break; |
| 438 | case 8: |
| 439 | pcr |= FIELD_PREP(PCR_BPIX_MASK, PCR_BPIX_8); |
| 440 | rgb = &def_rgb_8; |
| 441 | break; |
| 442 | } |
| 443 | |
| 444 | /* add sync polarities */ |
| 445 | pcr |= imxfb_mode->pcr & ~(PCR_PCD_MASK | PCR_BPIX_MASK); |
| 446 | |
| 447 | fbi->pcr = pcr; |
| 448 | /* |
| 449 | * The LCDC AUS Mode Control Register does not exist on imx1. |
| 450 | */ |
| 451 | if (!is_imx1_fb(fbi) && imxfb_mode->aus_mode) |
| 452 | fbi->lauscr = LAUSCR_AUS_MODE; |
| 453 | |
| 454 | if (imxfb_mode->pcr & PCR_TFT) |
| 455 | fbi->panel_type = PANEL_TYPE_TFT; |
| 456 | else if (imxfb_mode->pcr & PCR_COLOR) |
| 457 | fbi->panel_type = PANEL_TYPE_CSTN; |
| 458 | else |
| 459 | fbi->panel_type = PANEL_TYPE_MONOCHROME; |
| 460 | |
| 461 | /* |
| 462 | * Copy the RGB parameters for this display |
| 463 | * from the machine specific parameters. |
| 464 | */ |
| 465 | var->red = rgb->red; |
| 466 | var->green = rgb->green; |
| 467 | var->blue = rgb->blue; |
| 468 | var->transp = rgb->transp; |
| 469 | |
| 470 | pr_debug("RGBT length = %d:%d:%d:%d\n" , |
| 471 | var->red.length, var->green.length, var->blue.length, |
| 472 | var->transp.length); |
| 473 | |
| 474 | pr_debug("RGBT offset = %d:%d:%d:%d\n" , |
| 475 | var->red.offset, var->green.offset, var->blue.offset, |
| 476 | var->transp.offset); |
| 477 | |
| 478 | return 0; |
| 479 | } |
| 480 | |
| 481 | /* |
| 482 | * imxfb_set_par(): |
| 483 | * Set the user defined part of the display for the specified console |
| 484 | */ |
| 485 | static int imxfb_set_par(struct fb_info *info) |
| 486 | { |
| 487 | struct imxfb_info *fbi = info->par; |
| 488 | struct fb_var_screeninfo *var = &info->var; |
| 489 | |
| 490 | if (var->bits_per_pixel == 16 || var->bits_per_pixel == 32) |
| 491 | info->fix.visual = FB_VISUAL_TRUECOLOR; |
| 492 | else if (!fbi->cmap_static) |
| 493 | info->fix.visual = FB_VISUAL_PSEUDOCOLOR; |
| 494 | else { |
| 495 | /* |
| 496 | * Some people have weird ideas about wanting static |
| 497 | * pseudocolor maps. I suspect their user space |
| 498 | * applications are broken. |
| 499 | */ |
| 500 | info->fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR; |
| 501 | } |
| 502 | |
| 503 | info->fix.line_length = var->xres_virtual * var->bits_per_pixel / 8; |
| 504 | fbi->palette_size = var->bits_per_pixel == 8 ? 256 : 16; |
| 505 | |
| 506 | imxfb_activate_var(var, info); |
| 507 | |
| 508 | return 0; |
| 509 | } |
| 510 | |
| 511 | static int imxfb_enable_controller(struct imxfb_info *fbi) |
| 512 | { |
| 513 | int ret; |
| 514 | |
| 515 | if (fbi->enabled) |
| 516 | return 0; |
| 517 | |
| 518 | pr_debug("Enabling LCD controller\n" ); |
| 519 | |
| 520 | writel(val: fbi->map_dma, addr: fbi->regs + LCDC_SSA); |
| 521 | |
| 522 | /* panning offset 0 (0 pixel offset) */ |
| 523 | writel(FIELD_PREP(POS_POS_MASK, 0), addr: fbi->regs + LCDC_POS); |
| 524 | |
| 525 | /* disable hardware cursor */ |
| 526 | writel(readl(addr: fbi->regs + LCDC_CPOS) & ~(CPOS_CC0 | CPOS_CC1), |
| 527 | addr: fbi->regs + LCDC_CPOS); |
| 528 | |
| 529 | /* |
| 530 | * RMCR_LCDC_EN_MX1 is present on i.MX1 only, but doesn't hurt |
| 531 | * on other SoCs |
| 532 | */ |
| 533 | writel(RMCR_LCDC_EN_MX1, addr: fbi->regs + LCDC_RMCR); |
| 534 | |
| 535 | ret = clk_prepare_enable(clk: fbi->clk_ipg); |
| 536 | if (ret) |
| 537 | goto err_enable_ipg; |
| 538 | |
| 539 | ret = clk_prepare_enable(clk: fbi->clk_ahb); |
| 540 | if (ret) |
| 541 | goto err_enable_ahb; |
| 542 | |
| 543 | ret = clk_prepare_enable(clk: fbi->clk_per); |
| 544 | if (ret) |
| 545 | goto err_enable_per; |
| 546 | |
| 547 | fbi->enabled = true; |
| 548 | return 0; |
| 549 | |
| 550 | err_enable_per: |
| 551 | clk_disable_unprepare(clk: fbi->clk_ahb); |
| 552 | err_enable_ahb: |
| 553 | clk_disable_unprepare(clk: fbi->clk_ipg); |
| 554 | err_enable_ipg: |
| 555 | writel(val: 0, addr: fbi->regs + LCDC_RMCR); |
| 556 | |
| 557 | return ret; |
| 558 | } |
| 559 | |
| 560 | static void imxfb_disable_controller(struct imxfb_info *fbi) |
| 561 | { |
| 562 | if (!fbi->enabled) |
| 563 | return; |
| 564 | |
| 565 | pr_debug("Disabling LCD controller\n" ); |
| 566 | |
| 567 | clk_disable_unprepare(clk: fbi->clk_per); |
| 568 | clk_disable_unprepare(clk: fbi->clk_ahb); |
| 569 | clk_disable_unprepare(clk: fbi->clk_ipg); |
| 570 | fbi->enabled = false; |
| 571 | |
| 572 | writel(val: 0, addr: fbi->regs + LCDC_RMCR); |
| 573 | } |
| 574 | |
| 575 | static int imxfb_blank(int blank, struct fb_info *info) |
| 576 | { |
| 577 | struct imxfb_info *fbi = info->par; |
| 578 | |
| 579 | pr_debug("%s: blank=%d\n" , __func__, blank); |
| 580 | |
| 581 | switch (blank) { |
| 582 | case FB_BLANK_POWERDOWN: |
| 583 | case FB_BLANK_VSYNC_SUSPEND: |
| 584 | case FB_BLANK_HSYNC_SUSPEND: |
| 585 | case FB_BLANK_NORMAL: |
| 586 | imxfb_disable_controller(fbi); |
| 587 | break; |
| 588 | |
| 589 | case FB_BLANK_UNBLANK: |
| 590 | return imxfb_enable_controller(fbi); |
| 591 | } |
| 592 | return 0; |
| 593 | } |
| 594 | |
| 595 | static const struct fb_ops imxfb_ops = { |
| 596 | .owner = THIS_MODULE, |
| 597 | FB_DEFAULT_IOMEM_OPS, |
| 598 | .fb_check_var = imxfb_check_var, |
| 599 | .fb_set_par = imxfb_set_par, |
| 600 | .fb_setcolreg = imxfb_setcolreg, |
| 601 | .fb_blank = imxfb_blank, |
| 602 | }; |
| 603 | |
| 604 | /* |
| 605 | * imxfb_activate_var(): |
| 606 | * Configures LCD Controller based on entries in var parameter. Settings are |
| 607 | * only written to the controller if changes were made. |
| 608 | */ |
| 609 | static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *info) |
| 610 | { |
| 611 | struct imxfb_info *fbi = info->par; |
| 612 | u32 ymax_mask = is_imx1_fb(fbi) ? YMAX_MASK_IMX1 : YMAX_MASK_IMX21; |
| 613 | u8 left_margin_low; |
| 614 | |
| 615 | pr_debug("var: xres=%d hslen=%d lm=%d rm=%d\n" , |
| 616 | var->xres, var->hsync_len, |
| 617 | var->left_margin, var->right_margin); |
| 618 | pr_debug("var: yres=%d vslen=%d um=%d bm=%d\n" , |
| 619 | var->yres, var->vsync_len, |
| 620 | var->upper_margin, var->lower_margin); |
| 621 | |
| 622 | if (fbi->panel_type == PANEL_TYPE_TFT) |
| 623 | left_margin_low = 3; |
| 624 | else if (fbi->panel_type == PANEL_TYPE_CSTN) |
| 625 | left_margin_low = 2; |
| 626 | else |
| 627 | left_margin_low = 0; |
| 628 | |
| 629 | #if DEBUG_VAR |
| 630 | if (var->xres < 16 || var->xres > 1024) |
| 631 | dev_err(&fbi->pdev->dev, "%s: invalid xres %d\n" , |
| 632 | info->fix.id, var->xres); |
| 633 | if (var->hsync_len < 1 || var->hsync_len > 64) |
| 634 | dev_err(&fbi->pdev->dev, "%s: invalid hsync_len %d\n" , |
| 635 | info->fix.id, var->hsync_len); |
| 636 | if (var->left_margin < left_margin_low || var->left_margin > 255) |
| 637 | dev_err(&fbi->pdev->dev, "%s: invalid left_margin %d\n" , |
| 638 | info->fix.id, var->left_margin); |
| 639 | if (var->right_margin < 1 || var->right_margin > 255) |
| 640 | dev_err(&fbi->pdev->dev, "%s: invalid right_margin %d\n" , |
| 641 | info->fix.id, var->right_margin); |
| 642 | if (var->yres < 1 || var->yres > ymax_mask) |
| 643 | dev_err(&fbi->pdev->dev, "%s: invalid yres %d\n" , |
| 644 | info->fix.id, var->yres); |
| 645 | if (var->vsync_len > 100) |
| 646 | dev_err(&fbi->pdev->dev, "%s: invalid vsync_len %d\n" , |
| 647 | info->fix.id, var->vsync_len); |
| 648 | if (var->upper_margin > 63) |
| 649 | dev_err(&fbi->pdev->dev, "%s: invalid upper_margin %d\n" , |
| 650 | info->fix.id, var->upper_margin); |
| 651 | if (var->lower_margin > 255) |
| 652 | dev_err(&fbi->pdev->dev, "%s: invalid lower_margin %d\n" , |
| 653 | info->fix.id, var->lower_margin); |
| 654 | #endif |
| 655 | |
| 656 | /* physical screen start address */ |
| 657 | writel(FIELD_PREP(VPW_VPW_MASK, |
| 658 | var->xres * var->bits_per_pixel / 8 / 4), |
| 659 | addr: fbi->regs + LCDC_VPW); |
| 660 | |
| 661 | writel(FIELD_PREP(HCR_H_WIDTH_MASK, var->hsync_len - 1) | |
| 662 | FIELD_PREP(HCR_H_WAIT_1_MASK, var->right_margin - 1) | |
| 663 | FIELD_PREP(HCR_H_WAIT_2_MASK, |
| 664 | var->left_margin - left_margin_low), |
| 665 | addr: fbi->regs + LCDC_HCR); |
| 666 | |
| 667 | writel(FIELD_PREP(VCR_V_WIDTH_MASK, var->vsync_len) | |
| 668 | FIELD_PREP(VCR_V_WAIT_1_MASK, var->lower_margin) | |
| 669 | FIELD_PREP(VCR_V_WAIT_2_MASK, var->upper_margin), |
| 670 | addr: fbi->regs + LCDC_VCR); |
| 671 | |
| 672 | writel(FIELD_PREP(SIZE_XMAX_MASK, var->xres >> 4) | |
| 673 | (var->yres & ymax_mask), |
| 674 | addr: fbi->regs + LCDC_SIZE); |
| 675 | |
| 676 | writel(val: fbi->pcr, addr: fbi->regs + LCDC_PCR); |
| 677 | if (fbi->pwmr) |
| 678 | writel(val: fbi->pwmr, addr: fbi->regs + LCDC_PWMR); |
| 679 | writel(val: fbi->lscr1, addr: fbi->regs + LCDC_LSCR1); |
| 680 | |
| 681 | /* dmacr = 0 is no valid value, as we need DMA control marks. */ |
| 682 | if (fbi->dmacr) |
| 683 | writel(val: fbi->dmacr, addr: fbi->regs + LCDC_DMACR); |
| 684 | |
| 685 | if (fbi->lauscr) |
| 686 | writel(val: fbi->lauscr, addr: fbi->regs + LCDC_LAUSCR); |
| 687 | |
| 688 | return 0; |
| 689 | } |
| 690 | |
| 691 | static int imxfb_init_fbinfo(struct platform_device *pdev) |
| 692 | { |
| 693 | struct fb_info *info = platform_get_drvdata(pdev); |
| 694 | struct imxfb_info *fbi = info->par; |
| 695 | struct device_node *np; |
| 696 | |
| 697 | info->pseudo_palette = devm_kmalloc_array(dev: &pdev->dev, n: 16, |
| 698 | size: sizeof(u32), GFP_KERNEL); |
| 699 | if (!info->pseudo_palette) |
| 700 | return -ENOMEM; |
| 701 | |
| 702 | memset(fbi, 0, sizeof(struct imxfb_info)); |
| 703 | |
| 704 | fbi->pdev = pdev; |
| 705 | fbi->devtype = pdev->id_entry->driver_data; |
| 706 | |
| 707 | strscpy(info->fix.id, IMX_NAME, sizeof(info->fix.id)); |
| 708 | |
| 709 | info->fix.type = FB_TYPE_PACKED_PIXELS; |
| 710 | info->fix.type_aux = 0; |
| 711 | info->fix.xpanstep = 0; |
| 712 | info->fix.ypanstep = 0; |
| 713 | info->fix.ywrapstep = 0; |
| 714 | info->fix.accel = FB_ACCEL_NONE; |
| 715 | |
| 716 | info->var.nonstd = 0; |
| 717 | info->var.activate = FB_ACTIVATE_NOW; |
| 718 | info->var.height = -1; |
| 719 | info->var.width = -1; |
| 720 | info->var.accel_flags = 0; |
| 721 | info->var.vmode = FB_VMODE_NONINTERLACED; |
| 722 | |
| 723 | info->fbops = &imxfb_ops; |
| 724 | info->flags = FBINFO_READS_FAST; |
| 725 | |
| 726 | np = pdev->dev.of_node; |
| 727 | info->var.grayscale = of_property_read_bool(np, |
| 728 | propname: "cmap-greyscale" ); |
| 729 | fbi->cmap_inverse = of_property_read_bool(np, propname: "cmap-inverse" ); |
| 730 | fbi->cmap_static = of_property_read_bool(np, propname: "cmap-static" ); |
| 731 | |
| 732 | fbi->lscr1 = IMXFB_LSCR1_DEFAULT; |
| 733 | |
| 734 | of_property_read_u32(np, propname: "fsl,lpccr" , out_value: &fbi->pwmr); |
| 735 | |
| 736 | of_property_read_u32(np, propname: "fsl,lscr1" , out_value: &fbi->lscr1); |
| 737 | |
| 738 | of_property_read_u32(np, propname: "fsl,dmacr" , out_value: &fbi->dmacr); |
| 739 | |
| 740 | return 0; |
| 741 | } |
| 742 | |
| 743 | static int imxfb_of_read_mode(struct device *dev, struct device_node *np, |
| 744 | struct imx_fb_videomode *imxfb_mode) |
| 745 | { |
| 746 | int ret; |
| 747 | struct fb_videomode *of_mode = &imxfb_mode->mode; |
| 748 | u32 bpp; |
| 749 | u32 pcr; |
| 750 | |
| 751 | ret = of_property_read_string(np, propname: "model" , out_string: &of_mode->name); |
| 752 | if (ret) |
| 753 | of_mode->name = NULL; |
| 754 | |
| 755 | ret = of_get_fb_videomode(np, fb: of_mode, OF_USE_NATIVE_MODE); |
| 756 | if (ret) { |
| 757 | dev_err(dev, "Failed to get videomode from DT\n" ); |
| 758 | return ret; |
| 759 | } |
| 760 | |
| 761 | ret = of_property_read_u32(np, propname: "bits-per-pixel" , out_value: &bpp); |
| 762 | ret |= of_property_read_u32(np, propname: "fsl,pcr" , out_value: &pcr); |
| 763 | |
| 764 | if (ret) { |
| 765 | dev_err(dev, "Failed to read bpp and pcr from DT\n" ); |
| 766 | return -EINVAL; |
| 767 | } |
| 768 | |
| 769 | if (bpp < 1 || bpp > 255) { |
| 770 | dev_err(dev, "Bits per pixel have to be between 1 and 255\n" ); |
| 771 | return -EINVAL; |
| 772 | } |
| 773 | |
| 774 | imxfb_mode->bpp = bpp; |
| 775 | imxfb_mode->pcr = pcr; |
| 776 | |
| 777 | /* |
| 778 | * fsl,aus-mode is optional |
| 779 | */ |
| 780 | imxfb_mode->aus_mode = of_property_read_bool(np, propname: "fsl,aus-mode" ); |
| 781 | |
| 782 | return 0; |
| 783 | } |
| 784 | |
| 785 | static int imxfb_lcd_get_contrast(struct lcd_device *lcddev) |
| 786 | { |
| 787 | struct imxfb_info *fbi = dev_get_drvdata(dev: &lcddev->dev); |
| 788 | |
| 789 | return fbi->pwmr & 0xff; |
| 790 | } |
| 791 | |
| 792 | static int imxfb_lcd_set_contrast(struct lcd_device *lcddev, int contrast) |
| 793 | { |
| 794 | struct imxfb_info *fbi = dev_get_drvdata(dev: &lcddev->dev); |
| 795 | |
| 796 | if (fbi->pwmr && fbi->enabled) { |
| 797 | if (contrast > 255) |
| 798 | contrast = 255; |
| 799 | else if (contrast < 0) |
| 800 | contrast = 0; |
| 801 | |
| 802 | fbi->pwmr &= ~0xff; |
| 803 | fbi->pwmr |= contrast; |
| 804 | |
| 805 | writel(val: fbi->pwmr, addr: fbi->regs + LCDC_PWMR); |
| 806 | } |
| 807 | |
| 808 | return 0; |
| 809 | } |
| 810 | |
| 811 | static int imxfb_lcd_get_power(struct lcd_device *lcddev) |
| 812 | { |
| 813 | struct imxfb_info *fbi = dev_get_drvdata(dev: &lcddev->dev); |
| 814 | |
| 815 | if (!IS_ERR(ptr: fbi->lcd_pwr) && |
| 816 | !regulator_is_enabled(regulator: fbi->lcd_pwr)) |
| 817 | return LCD_POWER_OFF; |
| 818 | |
| 819 | return LCD_POWER_ON; |
| 820 | } |
| 821 | |
| 822 | static int imxfb_regulator_set(struct imxfb_info *fbi, int enable) |
| 823 | { |
| 824 | int ret; |
| 825 | |
| 826 | if (enable == fbi->lcd_pwr_enabled) |
| 827 | return 0; |
| 828 | |
| 829 | if (enable) |
| 830 | ret = regulator_enable(regulator: fbi->lcd_pwr); |
| 831 | else |
| 832 | ret = regulator_disable(regulator: fbi->lcd_pwr); |
| 833 | |
| 834 | if (ret == 0) |
| 835 | fbi->lcd_pwr_enabled = enable; |
| 836 | |
| 837 | return ret; |
| 838 | } |
| 839 | |
| 840 | static int imxfb_lcd_set_power(struct lcd_device *lcddev, int power) |
| 841 | { |
| 842 | struct imxfb_info *fbi = dev_get_drvdata(dev: &lcddev->dev); |
| 843 | |
| 844 | if (!IS_ERR(ptr: fbi->lcd_pwr)) |
| 845 | return imxfb_regulator_set(fbi, enable: power == LCD_POWER_ON); |
| 846 | |
| 847 | return 0; |
| 848 | } |
| 849 | |
| 850 | static const struct lcd_ops imxfb_lcd_ops = { |
| 851 | .get_contrast = imxfb_lcd_get_contrast, |
| 852 | .set_contrast = imxfb_lcd_set_contrast, |
| 853 | .get_power = imxfb_lcd_get_power, |
| 854 | .set_power = imxfb_lcd_set_power, |
| 855 | }; |
| 856 | |
| 857 | static int imxfb_setup(void) |
| 858 | { |
| 859 | char *opt, *options = NULL; |
| 860 | |
| 861 | if (fb_get_options(name: "imxfb" , option: &options)) |
| 862 | return -ENODEV; |
| 863 | |
| 864 | if (!options || !*options) |
| 865 | return 0; |
| 866 | |
| 867 | while ((opt = strsep(&options, "," )) != NULL) { |
| 868 | if (!*opt) |
| 869 | continue; |
| 870 | else |
| 871 | fb_mode = opt; |
| 872 | } |
| 873 | |
| 874 | return 0; |
| 875 | } |
| 876 | |
| 877 | static int imxfb_probe(struct platform_device *pdev) |
| 878 | { |
| 879 | struct imxfb_info *fbi; |
| 880 | struct lcd_device *lcd; |
| 881 | struct fb_info *info; |
| 882 | struct imx_fb_videomode *m; |
| 883 | const struct of_device_id *of_id; |
| 884 | struct device_node *display_np; |
| 885 | int ret, i; |
| 886 | int bytes_per_pixel; |
| 887 | |
| 888 | dev_info(&pdev->dev, "i.MX Framebuffer driver\n" ); |
| 889 | |
| 890 | ret = imxfb_setup(); |
| 891 | if (ret < 0) |
| 892 | return ret; |
| 893 | |
| 894 | of_id = of_match_device(matches: imxfb_of_dev_id, dev: &pdev->dev); |
| 895 | if (of_id) |
| 896 | pdev->id_entry = of_id->data; |
| 897 | |
| 898 | info = framebuffer_alloc(size: sizeof(struct imxfb_info), dev: &pdev->dev); |
| 899 | if (!info) |
| 900 | return -ENOMEM; |
| 901 | |
| 902 | fbi = info->par; |
| 903 | |
| 904 | platform_set_drvdata(pdev, data: info); |
| 905 | |
| 906 | ret = imxfb_init_fbinfo(pdev); |
| 907 | if (ret < 0) |
| 908 | goto failed_init; |
| 909 | |
| 910 | fb_mode = NULL; |
| 911 | |
| 912 | display_np = of_parse_phandle(np: pdev->dev.of_node, phandle_name: "display" , index: 0); |
| 913 | if (!display_np) { |
| 914 | dev_err(&pdev->dev, "No display defined in devicetree\n" ); |
| 915 | ret = -EINVAL; |
| 916 | goto failed_init; |
| 917 | } |
| 918 | |
| 919 | /* |
| 920 | * imxfb does not support more modes, we choose only the native |
| 921 | * mode. |
| 922 | */ |
| 923 | fbi->num_modes = 1; |
| 924 | |
| 925 | fbi->mode = devm_kzalloc(dev: &pdev->dev, |
| 926 | size: sizeof(struct imx_fb_videomode), GFP_KERNEL); |
| 927 | if (!fbi->mode) { |
| 928 | ret = -ENOMEM; |
| 929 | of_node_put(node: display_np); |
| 930 | goto failed_init; |
| 931 | } |
| 932 | |
| 933 | ret = imxfb_of_read_mode(dev: &pdev->dev, np: display_np, imxfb_mode: fbi->mode); |
| 934 | of_node_put(node: display_np); |
| 935 | if (ret) |
| 936 | goto failed_init; |
| 937 | |
| 938 | /* |
| 939 | * Calculate maximum bytes used per pixel. In most cases this should |
| 940 | * be the same as m->bpp/8 |
| 941 | */ |
| 942 | m = &fbi->mode[0]; |
| 943 | bytes_per_pixel = (m->bpp + 7) / 8; |
| 944 | for (i = 0; i < fbi->num_modes; i++, m++) |
| 945 | info->fix.smem_len = max_t(size_t, info->fix.smem_len, |
| 946 | m->mode.xres * m->mode.yres * bytes_per_pixel); |
| 947 | |
| 948 | fbi->clk_ipg = devm_clk_get(dev: &pdev->dev, id: "ipg" ); |
| 949 | if (IS_ERR(ptr: fbi->clk_ipg)) { |
| 950 | ret = PTR_ERR(ptr: fbi->clk_ipg); |
| 951 | goto failed_init; |
| 952 | } |
| 953 | |
| 954 | /* |
| 955 | * The LCDC controller does not have an enable bit. The |
| 956 | * controller starts directly when the clocks are enabled. |
| 957 | * If the clocks are enabled when the controller is not yet |
| 958 | * programmed with proper register values (enabled at the |
| 959 | * bootloader, for example) then it just goes into some undefined |
| 960 | * state. |
| 961 | * To avoid this issue, let's enable and disable LCDC IPG clock |
| 962 | * so that we force some kind of 'reset' to the LCDC block. |
| 963 | */ |
| 964 | ret = clk_prepare_enable(clk: fbi->clk_ipg); |
| 965 | if (ret) |
| 966 | goto failed_init; |
| 967 | clk_disable_unprepare(clk: fbi->clk_ipg); |
| 968 | |
| 969 | fbi->clk_ahb = devm_clk_get(dev: &pdev->dev, id: "ahb" ); |
| 970 | if (IS_ERR(ptr: fbi->clk_ahb)) { |
| 971 | ret = PTR_ERR(ptr: fbi->clk_ahb); |
| 972 | goto failed_init; |
| 973 | } |
| 974 | |
| 975 | fbi->clk_per = devm_clk_get(dev: &pdev->dev, id: "per" ); |
| 976 | if (IS_ERR(ptr: fbi->clk_per)) { |
| 977 | ret = PTR_ERR(ptr: fbi->clk_per); |
| 978 | goto failed_init; |
| 979 | } |
| 980 | |
| 981 | fbi->regs = devm_platform_ioremap_resource(pdev, index: 0); |
| 982 | if (IS_ERR(ptr: fbi->regs)) { |
| 983 | ret = PTR_ERR(ptr: fbi->regs); |
| 984 | goto failed_init; |
| 985 | } |
| 986 | |
| 987 | fbi->map_size = PAGE_ALIGN(info->fix.smem_len); |
| 988 | info->screen_buffer = dma_alloc_wc(dev: &pdev->dev, size: fbi->map_size, |
| 989 | dma_addr: &fbi->map_dma, GFP_KERNEL); |
| 990 | if (!info->screen_buffer) { |
| 991 | dev_err(&pdev->dev, "Failed to allocate video RAM\n" ); |
| 992 | ret = -ENOMEM; |
| 993 | goto failed_init; |
| 994 | } |
| 995 | |
| 996 | info->fix.smem_start = fbi->map_dma; |
| 997 | |
| 998 | INIT_LIST_HEAD(list: &info->modelist); |
| 999 | for (i = 0; i < fbi->num_modes; i++) { |
| 1000 | ret = fb_add_videomode(mode: &fbi->mode[i].mode, head: &info->modelist); |
| 1001 | if (ret) { |
| 1002 | dev_err(&pdev->dev, "Failed to add videomode\n" ); |
| 1003 | goto failed_cmap; |
| 1004 | } |
| 1005 | } |
| 1006 | |
| 1007 | /* |
| 1008 | * This makes sure that our colour bitfield |
| 1009 | * descriptors are correctly initialised. |
| 1010 | */ |
| 1011 | imxfb_check_var(var: &info->var, info); |
| 1012 | |
| 1013 | /* |
| 1014 | * For modes > 8bpp, the color map is bypassed. |
| 1015 | * Therefore, 256 entries are enough. |
| 1016 | */ |
| 1017 | ret = fb_alloc_cmap(cmap: &info->cmap, len: 256, transp: 0); |
| 1018 | if (ret < 0) |
| 1019 | goto failed_cmap; |
| 1020 | |
| 1021 | imxfb_set_par(info); |
| 1022 | |
| 1023 | fbi->lcd_pwr = devm_regulator_get(dev: &pdev->dev, id: "lcd" ); |
| 1024 | if (PTR_ERR(ptr: fbi->lcd_pwr) == -EPROBE_DEFER) { |
| 1025 | ret = -EPROBE_DEFER; |
| 1026 | goto failed_lcd; |
| 1027 | } |
| 1028 | |
| 1029 | lcd = devm_lcd_device_register(dev: &pdev->dev, name: "imxfb-lcd" , parent: &pdev->dev, devdata: fbi, |
| 1030 | ops: &imxfb_lcd_ops); |
| 1031 | if (IS_ERR(ptr: lcd)) { |
| 1032 | ret = PTR_ERR(ptr: lcd); |
| 1033 | goto failed_lcd; |
| 1034 | } |
| 1035 | |
| 1036 | lcd->props.max_contrast = 0xff; |
| 1037 | |
| 1038 | info->lcd_dev = lcd; |
| 1039 | |
| 1040 | ret = register_framebuffer(fb_info: info); |
| 1041 | if (ret < 0) { |
| 1042 | dev_err(&pdev->dev, "failed to register framebuffer\n" ); |
| 1043 | goto failed_lcd; |
| 1044 | } |
| 1045 | |
| 1046 | imxfb_enable_controller(fbi); |
| 1047 | |
| 1048 | return 0; |
| 1049 | |
| 1050 | failed_lcd: |
| 1051 | fb_dealloc_cmap(cmap: &info->cmap); |
| 1052 | failed_cmap: |
| 1053 | dma_free_wc(dev: &pdev->dev, size: fbi->map_size, cpu_addr: info->screen_buffer, |
| 1054 | dma_addr: fbi->map_dma); |
| 1055 | failed_init: |
| 1056 | framebuffer_release(info); |
| 1057 | return ret; |
| 1058 | } |
| 1059 | |
| 1060 | static void imxfb_remove(struct platform_device *pdev) |
| 1061 | { |
| 1062 | struct fb_info *info = platform_get_drvdata(pdev); |
| 1063 | struct imxfb_info *fbi = info->par; |
| 1064 | |
| 1065 | imxfb_disable_controller(fbi); |
| 1066 | |
| 1067 | unregister_framebuffer(fb_info: info); |
| 1068 | fb_dealloc_cmap(cmap: &info->cmap); |
| 1069 | dma_free_wc(dev: &pdev->dev, size: fbi->map_size, cpu_addr: info->screen_buffer, |
| 1070 | dma_addr: fbi->map_dma); |
| 1071 | framebuffer_release(info); |
| 1072 | } |
| 1073 | |
| 1074 | static int imxfb_suspend(struct device *dev) |
| 1075 | { |
| 1076 | struct fb_info *info = dev_get_drvdata(dev); |
| 1077 | struct imxfb_info *fbi = info->par; |
| 1078 | |
| 1079 | imxfb_disable_controller(fbi); |
| 1080 | |
| 1081 | return 0; |
| 1082 | } |
| 1083 | |
| 1084 | static int imxfb_resume(struct device *dev) |
| 1085 | { |
| 1086 | struct fb_info *info = dev_get_drvdata(dev); |
| 1087 | struct imxfb_info *fbi = info->par; |
| 1088 | |
| 1089 | imxfb_enable_controller(fbi); |
| 1090 | |
| 1091 | return 0; |
| 1092 | } |
| 1093 | |
| 1094 | static DEFINE_SIMPLE_DEV_PM_OPS(imxfb_pm_ops, imxfb_suspend, imxfb_resume); |
| 1095 | |
| 1096 | static struct platform_driver imxfb_driver = { |
| 1097 | .driver = { |
| 1098 | .name = DRIVER_NAME, |
| 1099 | .of_match_table = imxfb_of_dev_id, |
| 1100 | .pm = pm_sleep_ptr(&imxfb_pm_ops), |
| 1101 | }, |
| 1102 | .probe = imxfb_probe, |
| 1103 | .remove = imxfb_remove, |
| 1104 | .id_table = imxfb_devtype, |
| 1105 | }; |
| 1106 | module_platform_driver(imxfb_driver); |
| 1107 | |
| 1108 | MODULE_DESCRIPTION("Freescale i.MX framebuffer driver" ); |
| 1109 | MODULE_AUTHOR("Sascha Hauer, Pengutronix" ); |
| 1110 | MODULE_LICENSE("GPL" ); |
| 1111 | |