| 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Willsemi WUSB3801 Type-C port controller driver |
| 4 | * |
| 5 | * Copyright (C) 2022 Samuel Holland <samuel@sholland.org> |
| 6 | */ |
| 7 | |
| 8 | #include <linux/i2c.h> |
| 9 | #include <linux/module.h> |
| 10 | #include <linux/regmap.h> |
| 11 | #include <linux/regulator/consumer.h> |
| 12 | #include <linux/usb/typec.h> |
| 13 | |
| 14 | #define WUSB3801_REG_DEVICE_ID 0x01 |
| 15 | #define WUSB3801_REG_CTRL0 0x02 |
| 16 | #define WUSB3801_REG_INT 0x03 |
| 17 | #define WUSB3801_REG_STAT 0x04 |
| 18 | #define WUSB3801_REG_CTRL1 0x05 |
| 19 | #define WUSB3801_REG_TEST00 0x06 |
| 20 | #define WUSB3801_REG_TEST01 0x07 |
| 21 | #define WUSB3801_REG_TEST02 0x08 |
| 22 | #define WUSB3801_REG_TEST03 0x09 |
| 23 | #define WUSB3801_REG_TEST04 0x0a |
| 24 | #define WUSB3801_REG_TEST05 0x0b |
| 25 | #define WUSB3801_REG_TEST06 0x0c |
| 26 | #define WUSB3801_REG_TEST07 0x0d |
| 27 | #define WUSB3801_REG_TEST08 0x0e |
| 28 | #define WUSB3801_REG_TEST09 0x0f |
| 29 | #define WUSB3801_REG_TEST0A 0x10 |
| 30 | #define WUSB3801_REG_TEST0B 0x11 |
| 31 | #define WUSB3801_REG_TEST0C 0x12 |
| 32 | #define WUSB3801_REG_TEST0D 0x13 |
| 33 | #define WUSB3801_REG_TEST0E 0x14 |
| 34 | #define WUSB3801_REG_TEST0F 0x15 |
| 35 | #define WUSB3801_REG_TEST10 0x16 |
| 36 | #define WUSB3801_REG_TEST11 0x17 |
| 37 | #define WUSB3801_REG_TEST12 0x18 |
| 38 | |
| 39 | #define WUSB3801_DEVICE_ID_VERSION_ID GENMASK(7, 3) |
| 40 | #define WUSB3801_DEVICE_ID_VENDOR_ID GENMASK(2, 0) |
| 41 | |
| 42 | #define WUSB3801_CTRL0_DIS_ACC_SUPPORT BIT(7) |
| 43 | #define WUSB3801_CTRL0_TRY GENMASK(6, 5) |
| 44 | #define WUSB3801_CTRL0_TRY_NONE (0x0 << 5) |
| 45 | #define WUSB3801_CTRL0_TRY_SNK (0x1 << 5) |
| 46 | #define WUSB3801_CTRL0_TRY_SRC (0x2 << 5) |
| 47 | #define WUSB3801_CTRL0_CURRENT GENMASK(4, 3) /* SRC */ |
| 48 | #define WUSB3801_CTRL0_CURRENT_DEFAULT (0x0 << 3) |
| 49 | #define WUSB3801_CTRL0_CURRENT_1_5A (0x1 << 3) |
| 50 | #define WUSB3801_CTRL0_CURRENT_3_0A (0x2 << 3) |
| 51 | #define WUSB3801_CTRL0_ROLE GENMASK(2, 1) |
| 52 | #define WUSB3801_CTRL0_ROLE_SNK (0x0 << 1) |
| 53 | #define WUSB3801_CTRL0_ROLE_SRC (0x1 << 1) |
| 54 | #define WUSB3801_CTRL0_ROLE_DRP (0x2 << 1) |
| 55 | #define WUSB3801_CTRL0_INT_MASK BIT(0) |
| 56 | |
| 57 | #define WUSB3801_INT_ATTACHED BIT(0) |
| 58 | #define WUSB3801_INT_DETACHED BIT(1) |
| 59 | |
| 60 | #define WUSB3801_STAT_VBUS_DETECTED BIT(7) |
| 61 | #define WUSB3801_STAT_CURRENT GENMASK(6, 5) /* SNK */ |
| 62 | #define WUSB3801_STAT_CURRENT_STANDBY (0x0 << 5) |
| 63 | #define WUSB3801_STAT_CURRENT_DEFAULT (0x1 << 5) |
| 64 | #define WUSB3801_STAT_CURRENT_1_5A (0x2 << 5) |
| 65 | #define WUSB3801_STAT_CURRENT_3_0A (0x3 << 5) |
| 66 | #define WUSB3801_STAT_PARTNER GENMASK(4, 2) |
| 67 | #define WUSB3801_STAT_PARTNER_STANDBY (0x0 << 2) |
| 68 | #define WUSB3801_STAT_PARTNER_SNK (0x1 << 2) |
| 69 | #define WUSB3801_STAT_PARTNER_SRC (0x2 << 2) |
| 70 | #define WUSB3801_STAT_PARTNER_AUDIO (0x3 << 2) |
| 71 | #define WUSB3801_STAT_PARTNER_DEBUG (0x4 << 2) |
| 72 | #define WUSB3801_STAT_ORIENTATION GENMASK(1, 0) |
| 73 | #define WUSB3801_STAT_ORIENTATION_NONE (0x0 << 0) |
| 74 | #define WUSB3801_STAT_ORIENTATION_CC1 (0x1 << 0) |
| 75 | #define WUSB3801_STAT_ORIENTATION_CC2 (0x2 << 0) |
| 76 | #define WUSB3801_STAT_ORIENTATION_BOTH (0x3 << 0) |
| 77 | |
| 78 | #define WUSB3801_CTRL1_SM_RESET BIT(0) |
| 79 | |
| 80 | #define WUSB3801_TEST01_VENDOR_SUB_ID (BIT(8) | BIT(6)) |
| 81 | |
| 82 | #define WUSB3801_TEST02_FORCE_ERR_RCY BIT(8) |
| 83 | |
| 84 | #define WUSB3801_TEST0A_WAIT_VBUS BIT(5) |
| 85 | |
| 86 | struct wusb3801 { |
| 87 | struct typec_capability cap; |
| 88 | struct device *dev; |
| 89 | struct typec_partner *partner; |
| 90 | struct typec_port *port; |
| 91 | struct regmap *regmap; |
| 92 | struct regulator *vbus_supply; |
| 93 | unsigned int partner_type; |
| 94 | enum typec_port_type port_type; |
| 95 | enum typec_pwr_opmode pwr_opmode; |
| 96 | bool vbus_on; |
| 97 | }; |
| 98 | |
| 99 | static enum typec_role wusb3801_get_default_role(struct wusb3801 *wusb3801) |
| 100 | { |
| 101 | switch (wusb3801->port_type) { |
| 102 | case TYPEC_PORT_SRC: |
| 103 | return TYPEC_SOURCE; |
| 104 | case TYPEC_PORT_SNK: |
| 105 | return TYPEC_SINK; |
| 106 | case TYPEC_PORT_DRP: |
| 107 | default: |
| 108 | if (wusb3801->cap.prefer_role == TYPEC_SOURCE) |
| 109 | return TYPEC_SOURCE; |
| 110 | return TYPEC_SINK; |
| 111 | } |
| 112 | } |
| 113 | |
| 114 | static int wusb3801_map_port_type(enum typec_port_type type) |
| 115 | { |
| 116 | switch (type) { |
| 117 | case TYPEC_PORT_SRC: |
| 118 | return WUSB3801_CTRL0_ROLE_SRC; |
| 119 | case TYPEC_PORT_SNK: |
| 120 | return WUSB3801_CTRL0_ROLE_SNK; |
| 121 | case TYPEC_PORT_DRP: |
| 122 | default: |
| 123 | return WUSB3801_CTRL0_ROLE_DRP; |
| 124 | } |
| 125 | } |
| 126 | |
| 127 | static int wusb3801_map_pwr_opmode(enum typec_pwr_opmode mode) |
| 128 | { |
| 129 | switch (mode) { |
| 130 | case TYPEC_PWR_MODE_USB: |
| 131 | default: |
| 132 | return WUSB3801_CTRL0_CURRENT_DEFAULT; |
| 133 | case TYPEC_PWR_MODE_1_5A: |
| 134 | return WUSB3801_CTRL0_CURRENT_1_5A; |
| 135 | case TYPEC_PWR_MODE_3_0A: |
| 136 | return WUSB3801_CTRL0_CURRENT_3_0A; |
| 137 | } |
| 138 | } |
| 139 | |
| 140 | static unsigned int wusb3801_map_try_role(int role) |
| 141 | { |
| 142 | switch (role) { |
| 143 | case TYPEC_NO_PREFERRED_ROLE: |
| 144 | default: |
| 145 | return WUSB3801_CTRL0_TRY_NONE; |
| 146 | case TYPEC_SINK: |
| 147 | return WUSB3801_CTRL0_TRY_SNK; |
| 148 | case TYPEC_SOURCE: |
| 149 | return WUSB3801_CTRL0_TRY_SRC; |
| 150 | } |
| 151 | } |
| 152 | |
| 153 | static enum typec_orientation wusb3801_unmap_orientation(unsigned int status) |
| 154 | { |
| 155 | switch (status & WUSB3801_STAT_ORIENTATION) { |
| 156 | case WUSB3801_STAT_ORIENTATION_NONE: |
| 157 | case WUSB3801_STAT_ORIENTATION_BOTH: |
| 158 | default: |
| 159 | return TYPEC_ORIENTATION_NONE; |
| 160 | case WUSB3801_STAT_ORIENTATION_CC1: |
| 161 | return TYPEC_ORIENTATION_NORMAL; |
| 162 | case WUSB3801_STAT_ORIENTATION_CC2: |
| 163 | return TYPEC_ORIENTATION_REVERSE; |
| 164 | } |
| 165 | } |
| 166 | |
| 167 | static enum typec_pwr_opmode wusb3801_unmap_pwr_opmode(unsigned int status) |
| 168 | { |
| 169 | switch (status & WUSB3801_STAT_CURRENT) { |
| 170 | case WUSB3801_STAT_CURRENT_STANDBY: |
| 171 | case WUSB3801_STAT_CURRENT_DEFAULT: |
| 172 | default: |
| 173 | return TYPEC_PWR_MODE_USB; |
| 174 | case WUSB3801_STAT_CURRENT_1_5A: |
| 175 | return TYPEC_PWR_MODE_1_5A; |
| 176 | case WUSB3801_STAT_CURRENT_3_0A: |
| 177 | return TYPEC_PWR_MODE_3_0A; |
| 178 | } |
| 179 | } |
| 180 | |
| 181 | static int wusb3801_try_role(struct typec_port *port, int role) |
| 182 | { |
| 183 | struct wusb3801 *wusb3801 = typec_get_drvdata(port); |
| 184 | |
| 185 | return regmap_update_bits(map: wusb3801->regmap, WUSB3801_REG_CTRL0, |
| 186 | WUSB3801_CTRL0_TRY, |
| 187 | val: wusb3801_map_try_role(role)); |
| 188 | } |
| 189 | |
| 190 | static int wusb3801_port_type_set(struct typec_port *port, |
| 191 | enum typec_port_type type) |
| 192 | { |
| 193 | struct wusb3801 *wusb3801 = typec_get_drvdata(port); |
| 194 | int ret; |
| 195 | |
| 196 | ret = regmap_update_bits(map: wusb3801->regmap, WUSB3801_REG_CTRL0, |
| 197 | WUSB3801_CTRL0_ROLE, |
| 198 | val: wusb3801_map_port_type(type)); |
| 199 | if (ret) |
| 200 | return ret; |
| 201 | |
| 202 | wusb3801->port_type = type; |
| 203 | |
| 204 | return 0; |
| 205 | } |
| 206 | |
| 207 | static const struct typec_operations wusb3801_typec_ops = { |
| 208 | .try_role = wusb3801_try_role, |
| 209 | .port_type_set = wusb3801_port_type_set, |
| 210 | }; |
| 211 | |
| 212 | static int wusb3801_hw_init(struct wusb3801 *wusb3801) |
| 213 | { |
| 214 | return regmap_write(map: wusb3801->regmap, WUSB3801_REG_CTRL0, |
| 215 | val: wusb3801_map_try_role(role: wusb3801->cap.prefer_role) | |
| 216 | wusb3801_map_pwr_opmode(mode: wusb3801->pwr_opmode) | |
| 217 | wusb3801_map_port_type(type: wusb3801->port_type)); |
| 218 | } |
| 219 | |
| 220 | static void wusb3801_hw_update(struct wusb3801 *wusb3801) |
| 221 | { |
| 222 | struct typec_port *port = wusb3801->port; |
| 223 | struct device *dev = wusb3801->dev; |
| 224 | unsigned int partner_type, status; |
| 225 | int ret; |
| 226 | |
| 227 | ret = regmap_read(map: wusb3801->regmap, WUSB3801_REG_STAT, val: &status); |
| 228 | if (ret) { |
| 229 | dev_warn(dev, "Failed to read port status: %d\n" , ret); |
| 230 | status = 0; |
| 231 | } |
| 232 | dev_dbg(dev, "status = 0x%02x\n" , status); |
| 233 | |
| 234 | partner_type = status & WUSB3801_STAT_PARTNER; |
| 235 | |
| 236 | if (partner_type == WUSB3801_STAT_PARTNER_SNK) { |
| 237 | if (!wusb3801->vbus_on) { |
| 238 | ret = regulator_enable(regulator: wusb3801->vbus_supply); |
| 239 | if (ret) |
| 240 | dev_warn(dev, "Failed to enable VBUS: %d\n" , ret); |
| 241 | wusb3801->vbus_on = true; |
| 242 | } |
| 243 | } else { |
| 244 | if (wusb3801->vbus_on) { |
| 245 | regulator_disable(regulator: wusb3801->vbus_supply); |
| 246 | wusb3801->vbus_on = false; |
| 247 | } |
| 248 | } |
| 249 | |
| 250 | if (partner_type != wusb3801->partner_type) { |
| 251 | struct typec_partner_desc desc = {}; |
| 252 | enum typec_data_role data_role; |
| 253 | enum typec_role pwr_role = wusb3801_get_default_role(wusb3801); |
| 254 | |
| 255 | switch (partner_type) { |
| 256 | case WUSB3801_STAT_PARTNER_STANDBY: |
| 257 | break; |
| 258 | case WUSB3801_STAT_PARTNER_SNK: |
| 259 | pwr_role = TYPEC_SOURCE; |
| 260 | break; |
| 261 | case WUSB3801_STAT_PARTNER_SRC: |
| 262 | pwr_role = TYPEC_SINK; |
| 263 | break; |
| 264 | case WUSB3801_STAT_PARTNER_AUDIO: |
| 265 | desc.accessory = TYPEC_ACCESSORY_AUDIO; |
| 266 | break; |
| 267 | case WUSB3801_STAT_PARTNER_DEBUG: |
| 268 | desc.accessory = TYPEC_ACCESSORY_DEBUG; |
| 269 | break; |
| 270 | } |
| 271 | |
| 272 | if (wusb3801->partner) { |
| 273 | typec_unregister_partner(partner: wusb3801->partner); |
| 274 | wusb3801->partner = NULL; |
| 275 | } |
| 276 | |
| 277 | if (partner_type != WUSB3801_STAT_PARTNER_STANDBY) { |
| 278 | wusb3801->partner = typec_register_partner(port, desc: &desc); |
| 279 | if (IS_ERR(ptr: wusb3801->partner)) |
| 280 | dev_err(dev, "Failed to register partner: %ld\n" , |
| 281 | PTR_ERR(wusb3801->partner)); |
| 282 | } |
| 283 | |
| 284 | data_role = pwr_role == TYPEC_SOURCE ? TYPEC_HOST : TYPEC_DEVICE; |
| 285 | typec_set_data_role(port, role: data_role); |
| 286 | typec_set_pwr_role(port, role: pwr_role); |
| 287 | typec_set_vconn_role(port, role: pwr_role); |
| 288 | } |
| 289 | |
| 290 | typec_set_pwr_opmode(port: wusb3801->port, |
| 291 | mode: partner_type == WUSB3801_STAT_PARTNER_SRC |
| 292 | ? wusb3801_unmap_pwr_opmode(status) |
| 293 | : wusb3801->pwr_opmode); |
| 294 | typec_set_orientation(port: wusb3801->port, |
| 295 | orientation: wusb3801_unmap_orientation(status)); |
| 296 | |
| 297 | wusb3801->partner_type = partner_type; |
| 298 | } |
| 299 | |
| 300 | static irqreturn_t wusb3801_irq(int irq, void *data) |
| 301 | { |
| 302 | struct wusb3801 *wusb3801 = data; |
| 303 | unsigned int dummy; |
| 304 | |
| 305 | /* |
| 306 | * The interrupt register must be read in order to clear the IRQ, |
| 307 | * but all of the useful information is in the status register. |
| 308 | */ |
| 309 | regmap_read(map: wusb3801->regmap, WUSB3801_REG_INT, val: &dummy); |
| 310 | |
| 311 | wusb3801_hw_update(wusb3801); |
| 312 | |
| 313 | return IRQ_HANDLED; |
| 314 | } |
| 315 | |
| 316 | static const struct regmap_config config = { |
| 317 | .reg_bits = 8, |
| 318 | .val_bits = 8, |
| 319 | .max_register = WUSB3801_REG_TEST12, |
| 320 | }; |
| 321 | |
| 322 | static int wusb3801_probe(struct i2c_client *client) |
| 323 | { |
| 324 | struct device *dev = &client->dev; |
| 325 | struct fwnode_handle *connector; |
| 326 | struct wusb3801 *wusb3801; |
| 327 | const char *cap_str; |
| 328 | int ret; |
| 329 | |
| 330 | wusb3801 = devm_kzalloc(dev, size: sizeof(*wusb3801), GFP_KERNEL); |
| 331 | if (!wusb3801) |
| 332 | return -ENOMEM; |
| 333 | |
| 334 | i2c_set_clientdata(client, data: wusb3801); |
| 335 | |
| 336 | wusb3801->dev = dev; |
| 337 | |
| 338 | wusb3801->regmap = devm_regmap_init_i2c(client, &config); |
| 339 | if (IS_ERR(ptr: wusb3801->regmap)) |
| 340 | return PTR_ERR(ptr: wusb3801->regmap); |
| 341 | |
| 342 | wusb3801->vbus_supply = devm_regulator_get(dev, id: "vbus" ); |
| 343 | if (IS_ERR(ptr: wusb3801->vbus_supply)) |
| 344 | return PTR_ERR(ptr: wusb3801->vbus_supply); |
| 345 | |
| 346 | connector = device_get_named_child_node(dev, childname: "connector" ); |
| 347 | if (!connector) |
| 348 | return -ENODEV; |
| 349 | |
| 350 | ret = typec_get_fw_cap(cap: &wusb3801->cap, fwnode: connector); |
| 351 | if (ret) |
| 352 | goto err_put_connector; |
| 353 | wusb3801->port_type = wusb3801->cap.type; |
| 354 | |
| 355 | ret = fwnode_property_read_string(fwnode: connector, propname: "typec-power-opmode" , val: &cap_str); |
| 356 | if (ret) |
| 357 | goto err_put_connector; |
| 358 | |
| 359 | ret = typec_find_pwr_opmode(name: cap_str); |
| 360 | if (ret < 0 || ret == TYPEC_PWR_MODE_PD) |
| 361 | goto err_put_connector; |
| 362 | wusb3801->pwr_opmode = ret; |
| 363 | |
| 364 | /* Initialize the hardware with the devicetree settings. */ |
| 365 | ret = wusb3801_hw_init(wusb3801); |
| 366 | if (ret) |
| 367 | goto err_put_connector; |
| 368 | |
| 369 | wusb3801->cap.revision = USB_TYPEC_REV_1_2; |
| 370 | wusb3801->cap.accessory[0] = TYPEC_ACCESSORY_AUDIO; |
| 371 | wusb3801->cap.accessory[1] = TYPEC_ACCESSORY_DEBUG; |
| 372 | wusb3801->cap.orientation_aware = true; |
| 373 | wusb3801->cap.driver_data = wusb3801; |
| 374 | wusb3801->cap.ops = &wusb3801_typec_ops; |
| 375 | |
| 376 | wusb3801->port = typec_register_port(parent: dev, cap: &wusb3801->cap); |
| 377 | if (IS_ERR(ptr: wusb3801->port)) { |
| 378 | ret = PTR_ERR(ptr: wusb3801->port); |
| 379 | goto err_put_connector; |
| 380 | } |
| 381 | |
| 382 | /* Initialize the port attributes from the hardware state. */ |
| 383 | wusb3801_hw_update(wusb3801); |
| 384 | |
| 385 | ret = request_threaded_irq(irq: client->irq, NULL, thread_fn: wusb3801_irq, |
| 386 | IRQF_ONESHOT, name: dev_name(dev), dev: wusb3801); |
| 387 | if (ret) |
| 388 | goto err_unregister_port; |
| 389 | |
| 390 | fwnode_handle_put(fwnode: connector); |
| 391 | |
| 392 | return 0; |
| 393 | |
| 394 | err_unregister_port: |
| 395 | typec_unregister_port(port: wusb3801->port); |
| 396 | err_put_connector: |
| 397 | fwnode_handle_put(fwnode: connector); |
| 398 | |
| 399 | return ret; |
| 400 | } |
| 401 | |
| 402 | static void wusb3801_remove(struct i2c_client *client) |
| 403 | { |
| 404 | struct wusb3801 *wusb3801 = i2c_get_clientdata(client); |
| 405 | |
| 406 | free_irq(client->irq, wusb3801); |
| 407 | |
| 408 | if (wusb3801->partner) |
| 409 | typec_unregister_partner(partner: wusb3801->partner); |
| 410 | typec_unregister_port(port: wusb3801->port); |
| 411 | |
| 412 | if (wusb3801->vbus_on) |
| 413 | regulator_disable(regulator: wusb3801->vbus_supply); |
| 414 | } |
| 415 | |
| 416 | static const struct of_device_id wusb3801_of_match[] = { |
| 417 | { .compatible = "willsemi,wusb3801" }, |
| 418 | {} |
| 419 | }; |
| 420 | MODULE_DEVICE_TABLE(of, wusb3801_of_match); |
| 421 | |
| 422 | static struct i2c_driver wusb3801_driver = { |
| 423 | .probe = wusb3801_probe, |
| 424 | .remove = wusb3801_remove, |
| 425 | .driver = { |
| 426 | .name = "wusb3801" , |
| 427 | .of_match_table = wusb3801_of_match, |
| 428 | }, |
| 429 | }; |
| 430 | |
| 431 | module_i2c_driver(wusb3801_driver); |
| 432 | |
| 433 | MODULE_AUTHOR("Samuel Holland <samuel@sholland.org>" ); |
| 434 | MODULE_DESCRIPTION("Willsemi WUSB3801 Type-C port controller driver" ); |
| 435 | MODULE_LICENSE("GPL" ); |
| 436 | |