1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (c) 2014, Sony Mobile Communications AB.
4 * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
5 */
6
7#include <linux/module.h>
8#include <linux/platform_device.h>
9#include <linux/of.h>
10#include <linux/of_device.h>
11#include <linux/regulator/driver.h>
12#include <linux/regulator/machine.h>
13#include <linux/regulator/of_regulator.h>
14#include <linux/mfd/qcom_rpm.h>
15
16#include <dt-bindings/mfd/qcom-rpm.h>
17
18#define MAX_REQUEST_LEN 2
19
20struct request_member {
21 int word;
22 unsigned int mask;
23 int shift;
24};
25
26struct rpm_reg_parts {
27 struct request_member mV; /* used if voltage is in mV */
28 struct request_member uV; /* used if voltage is in uV */
29 struct request_member ip; /* peak current in mA */
30 struct request_member pd; /* pull down enable */
31 struct request_member ia; /* average current in mA */
32 struct request_member fm; /* force mode */
33 struct request_member pm; /* power mode */
34 struct request_member pc; /* pin control */
35 struct request_member pf; /* pin function */
36 struct request_member enable_state; /* NCP and switch */
37 struct request_member comp_mode; /* NCP */
38 struct request_member freq; /* frequency: NCP and SMPS */
39 struct request_member freq_clk_src; /* clock source: SMPS */
40 struct request_member hpm; /* switch: control OCP and SS */
41 int request_len;
42};
43
44#define FORCE_MODE_IS_2_BITS(reg) \
45 (((reg)->parts->fm.mask >> (reg)->parts->fm.shift) == 3)
46
47struct qcom_rpm_reg {
48 struct qcom_rpm *rpm;
49
50 struct mutex lock;
51 struct device *dev;
52 struct regulator_desc desc;
53 const struct rpm_reg_parts *parts;
54
55 int resource;
56 u32 val[MAX_REQUEST_LEN];
57
58 int uV;
59 int is_enabled;
60
61 bool supports_force_mode_auto;
62 bool supports_force_mode_bypass;
63};
64
65static const struct rpm_reg_parts rpm8660_ldo_parts = {
66 .request_len = 2,
67 .mV = { 0, 0x00000FFF, 0 },
68 .ip = { 0, 0x00FFF000, 12 },
69 .fm = { 0, 0x03000000, 24 },
70 .pc = { 0, 0x3C000000, 26 },
71 .pf = { 0, 0xC0000000, 30 },
72 .pd = { 1, 0x00000001, 0 },
73 .ia = { 1, 0x00001FFE, 1 },
74};
75
76static const struct rpm_reg_parts rpm8660_smps_parts = {
77 .request_len = 2,
78 .mV = { 0, 0x00000FFF, 0 },
79 .ip = { 0, 0x00FFF000, 12 },
80 .fm = { 0, 0x03000000, 24 },
81 .pc = { 0, 0x3C000000, 26 },
82 .pf = { 0, 0xC0000000, 30 },
83 .pd = { 1, 0x00000001, 0 },
84 .ia = { 1, 0x00001FFE, 1 },
85 .freq = { 1, 0x001FE000, 13 },
86 .freq_clk_src = { 1, 0x00600000, 21 },
87};
88
89static const struct rpm_reg_parts rpm8660_switch_parts = {
90 .request_len = 1,
91 .enable_state = { 0, 0x00000001, 0 },
92 .pd = { 0, 0x00000002, 1 },
93 .pc = { 0, 0x0000003C, 2 },
94 .pf = { 0, 0x000000C0, 6 },
95 .hpm = { 0, 0x00000300, 8 },
96};
97
98static const struct rpm_reg_parts rpm8660_ncp_parts = {
99 .request_len = 1,
100 .mV = { 0, 0x00000FFF, 0 },
101 .enable_state = { 0, 0x00001000, 12 },
102 .comp_mode = { 0, 0x00002000, 13 },
103 .freq = { 0, 0x003FC000, 14 },
104};
105
106static const struct rpm_reg_parts rpm8960_ldo_parts = {
107 .request_len = 2,
108 .uV = { 0, 0x007FFFFF, 0 },
109 .pd = { 0, 0x00800000, 23 },
110 .pc = { 0, 0x0F000000, 24 },
111 .pf = { 0, 0xF0000000, 28 },
112 .ip = { 1, 0x000003FF, 0 },
113 .ia = { 1, 0x000FFC00, 10 },
114 .fm = { 1, 0x00700000, 20 },
115};
116
117static const struct rpm_reg_parts rpm8960_smps_parts = {
118 .request_len = 2,
119 .uV = { 0, 0x007FFFFF, 0 },
120 .pd = { 0, 0x00800000, 23 },
121 .pc = { 0, 0x0F000000, 24 },
122 .pf = { 0, 0xF0000000, 28 },
123 .ip = { 1, 0x000003FF, 0 },
124 .ia = { 1, 0x000FFC00, 10 },
125 .fm = { 1, 0x00700000, 20 },
126 .pm = { 1, 0x00800000, 23 },
127 .freq = { 1, 0x1F000000, 24 },
128 .freq_clk_src = { 1, 0x60000000, 29 },
129};
130
131static const struct rpm_reg_parts rpm8960_switch_parts = {
132 .request_len = 1,
133 .enable_state = { 0, 0x00000001, 0 },
134 .pd = { 0, 0x00000002, 1 },
135 .pc = { 0, 0x0000003C, 2 },
136 .pf = { 0, 0x000003C0, 6 },
137 .hpm = { 0, 0x00000C00, 10 },
138};
139
140static const struct rpm_reg_parts rpm8960_ncp_parts = {
141 .request_len = 1,
142 .uV = { 0, 0x007FFFFF, 0 },
143 .enable_state = { 0, 0x00800000, 23 },
144 .comp_mode = { 0, 0x01000000, 24 },
145 .freq = { 0, 0x3E000000, 25 },
146};
147
148/*
149 * Physically available PMIC regulator voltage ranges
150 */
151static const struct linear_range pldo_ranges[] = {
152 REGULATOR_LINEAR_RANGE( 750000, 0, 59, 12500),
153 REGULATOR_LINEAR_RANGE(1500000, 60, 123, 25000),
154 REGULATOR_LINEAR_RANGE(3100000, 124, 160, 50000),
155};
156
157static const struct linear_range nldo_ranges[] = {
158 REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500),
159};
160
161static const struct linear_range nldo1200_ranges[] = {
162 REGULATOR_LINEAR_RANGE( 375000, 0, 59, 6250),
163 REGULATOR_LINEAR_RANGE( 750000, 60, 123, 12500),
164};
165
166static const struct linear_range smps_ranges[] = {
167 REGULATOR_LINEAR_RANGE( 375000, 0, 29, 12500),
168 REGULATOR_LINEAR_RANGE( 750000, 30, 89, 12500),
169 REGULATOR_LINEAR_RANGE(1500000, 90, 153, 25000),
170};
171
172static const struct linear_range ftsmps_ranges[] = {
173 REGULATOR_LINEAR_RANGE( 350000, 0, 6, 50000),
174 REGULATOR_LINEAR_RANGE( 700000, 7, 63, 12500),
175 REGULATOR_LINEAR_RANGE(1500000, 64, 100, 50000),
176};
177
178static const struct linear_range smb208_ranges[] = {
179 REGULATOR_LINEAR_RANGE( 375000, 0, 29, 12500),
180 REGULATOR_LINEAR_RANGE( 750000, 30, 89, 12500),
181 REGULATOR_LINEAR_RANGE(1500000, 90, 153, 25000),
182 REGULATOR_LINEAR_RANGE(3100000, 154, 234, 25000),
183};
184
185static const struct linear_range ncp_ranges[] = {
186 REGULATOR_LINEAR_RANGE(1500000, 0, 31, 50000),
187};
188
189static int rpm_reg_write(struct qcom_rpm_reg *vreg,
190 const struct request_member *req,
191 const int value)
192{
193 if (WARN_ON((value << req->shift) & ~req->mask))
194 return -EINVAL;
195
196 vreg->val[req->word] &= ~req->mask;
197 vreg->val[req->word] |= value << req->shift;
198
199 return qcom_rpm_write(rpm: vreg->rpm,
200 QCOM_RPM_ACTIVE_STATE,
201 resource: vreg->resource,
202 buf: vreg->val,
203 count: vreg->parts->request_len);
204}
205
206static int rpm_reg_set_mV_sel(struct regulator_dev *rdev,
207 unsigned selector)
208{
209 struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
210 const struct rpm_reg_parts *parts = vreg->parts;
211 const struct request_member *req = &parts->mV;
212 int ret = 0;
213 int uV;
214
215 if (req->mask == 0)
216 return -EINVAL;
217
218 uV = regulator_list_voltage_linear_range(rdev, selector);
219 if (uV < 0)
220 return uV;
221
222 mutex_lock(&vreg->lock);
223 if (vreg->is_enabled)
224 ret = rpm_reg_write(vreg, req, value: uV / 1000);
225
226 if (!ret)
227 vreg->uV = uV;
228 mutex_unlock(lock: &vreg->lock);
229
230 return ret;
231}
232
233static int rpm_reg_set_uV_sel(struct regulator_dev *rdev,
234 unsigned selector)
235{
236 struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
237 const struct rpm_reg_parts *parts = vreg->parts;
238 const struct request_member *req = &parts->uV;
239 int ret = 0;
240 int uV;
241
242 if (req->mask == 0)
243 return -EINVAL;
244
245 uV = regulator_list_voltage_linear_range(rdev, selector);
246 if (uV < 0)
247 return uV;
248
249 mutex_lock(&vreg->lock);
250 if (vreg->is_enabled)
251 ret = rpm_reg_write(vreg, req, value: uV);
252
253 if (!ret)
254 vreg->uV = uV;
255 mutex_unlock(lock: &vreg->lock);
256
257 return ret;
258}
259
260static int rpm_reg_get_voltage(struct regulator_dev *rdev)
261{
262 struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
263
264 return vreg->uV;
265}
266
267static int rpm_reg_mV_enable(struct regulator_dev *rdev)
268{
269 struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
270 const struct rpm_reg_parts *parts = vreg->parts;
271 const struct request_member *req = &parts->mV;
272 int ret;
273
274 if (req->mask == 0)
275 return -EINVAL;
276
277 mutex_lock(&vreg->lock);
278 ret = rpm_reg_write(vreg, req, value: vreg->uV / 1000);
279 if (!ret)
280 vreg->is_enabled = 1;
281 mutex_unlock(lock: &vreg->lock);
282
283 return ret;
284}
285
286static int rpm_reg_uV_enable(struct regulator_dev *rdev)
287{
288 struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
289 const struct rpm_reg_parts *parts = vreg->parts;
290 const struct request_member *req = &parts->uV;
291 int ret;
292
293 if (req->mask == 0)
294 return -EINVAL;
295
296 mutex_lock(&vreg->lock);
297 ret = rpm_reg_write(vreg, req, value: vreg->uV);
298 if (!ret)
299 vreg->is_enabled = 1;
300 mutex_unlock(lock: &vreg->lock);
301
302 return ret;
303}
304
305static int rpm_reg_switch_enable(struct regulator_dev *rdev)
306{
307 struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
308 const struct rpm_reg_parts *parts = vreg->parts;
309 const struct request_member *req = &parts->enable_state;
310 int ret;
311
312 if (req->mask == 0)
313 return -EINVAL;
314
315 mutex_lock(&vreg->lock);
316 ret = rpm_reg_write(vreg, req, value: 1);
317 if (!ret)
318 vreg->is_enabled = 1;
319 mutex_unlock(lock: &vreg->lock);
320
321 return ret;
322}
323
324static int rpm_reg_mV_disable(struct regulator_dev *rdev)
325{
326 struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
327 const struct rpm_reg_parts *parts = vreg->parts;
328 const struct request_member *req = &parts->mV;
329 int ret;
330
331 if (req->mask == 0)
332 return -EINVAL;
333
334 mutex_lock(&vreg->lock);
335 ret = rpm_reg_write(vreg, req, value: 0);
336 if (!ret)
337 vreg->is_enabled = 0;
338 mutex_unlock(lock: &vreg->lock);
339
340 return ret;
341}
342
343static int rpm_reg_uV_disable(struct regulator_dev *rdev)
344{
345 struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
346 const struct rpm_reg_parts *parts = vreg->parts;
347 const struct request_member *req = &parts->uV;
348 int ret;
349
350 if (req->mask == 0)
351 return -EINVAL;
352
353 mutex_lock(&vreg->lock);
354 ret = rpm_reg_write(vreg, req, value: 0);
355 if (!ret)
356 vreg->is_enabled = 0;
357 mutex_unlock(lock: &vreg->lock);
358
359 return ret;
360}
361
362static int rpm_reg_switch_disable(struct regulator_dev *rdev)
363{
364 struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
365 const struct rpm_reg_parts *parts = vreg->parts;
366 const struct request_member *req = &parts->enable_state;
367 int ret;
368
369 if (req->mask == 0)
370 return -EINVAL;
371
372 mutex_lock(&vreg->lock);
373 ret = rpm_reg_write(vreg, req, value: 0);
374 if (!ret)
375 vreg->is_enabled = 0;
376 mutex_unlock(lock: &vreg->lock);
377
378 return ret;
379}
380
381static int rpm_reg_is_enabled(struct regulator_dev *rdev)
382{
383 struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
384
385 return vreg->is_enabled;
386}
387
388static int rpm_reg_set_load(struct regulator_dev *rdev, int load_uA)
389{
390 struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
391 const struct rpm_reg_parts *parts = vreg->parts;
392 const struct request_member *req = &parts->ia;
393 int load_mA = load_uA / 1000;
394 int max_mA = req->mask >> req->shift;
395 int ret;
396
397 if (req->mask == 0)
398 return -EINVAL;
399
400 if (load_mA > max_mA)
401 load_mA = max_mA;
402
403 mutex_lock(&vreg->lock);
404 ret = rpm_reg_write(vreg, req, value: load_mA);
405 mutex_unlock(lock: &vreg->lock);
406
407 return ret;
408}
409
410static const struct regulator_ops uV_ops = {
411 .list_voltage = regulator_list_voltage_linear_range,
412
413 .set_voltage_sel = rpm_reg_set_uV_sel,
414 .get_voltage = rpm_reg_get_voltage,
415
416 .enable = rpm_reg_uV_enable,
417 .disable = rpm_reg_uV_disable,
418 .is_enabled = rpm_reg_is_enabled,
419
420 .set_load = rpm_reg_set_load,
421};
422
423static const struct regulator_ops mV_ops = {
424 .list_voltage = regulator_list_voltage_linear_range,
425
426 .set_voltage_sel = rpm_reg_set_mV_sel,
427 .get_voltage = rpm_reg_get_voltage,
428
429 .enable = rpm_reg_mV_enable,
430 .disable = rpm_reg_mV_disable,
431 .is_enabled = rpm_reg_is_enabled,
432
433 .set_load = rpm_reg_set_load,
434};
435
436static const struct regulator_ops switch_ops = {
437 .enable = rpm_reg_switch_enable,
438 .disable = rpm_reg_switch_disable,
439 .is_enabled = rpm_reg_is_enabled,
440};
441
442/*
443 * PM8018 regulators
444 */
445static const struct qcom_rpm_reg pm8018_pldo = {
446 .desc.linear_ranges = pldo_ranges,
447 .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
448 .desc.n_voltages = 161,
449 .desc.ops = &uV_ops,
450 .parts = &rpm8960_ldo_parts,
451 .supports_force_mode_auto = false,
452 .supports_force_mode_bypass = false,
453};
454
455static const struct qcom_rpm_reg pm8018_nldo = {
456 .desc.linear_ranges = nldo_ranges,
457 .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
458 .desc.n_voltages = 64,
459 .desc.ops = &uV_ops,
460 .parts = &rpm8960_ldo_parts,
461 .supports_force_mode_auto = false,
462 .supports_force_mode_bypass = false,
463};
464
465static const struct qcom_rpm_reg pm8018_smps = {
466 .desc.linear_ranges = smps_ranges,
467 .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges),
468 .desc.n_voltages = 154,
469 .desc.ops = &uV_ops,
470 .parts = &rpm8960_smps_parts,
471 .supports_force_mode_auto = false,
472 .supports_force_mode_bypass = false,
473};
474
475static const struct qcom_rpm_reg pm8018_switch = {
476 .desc.ops = &switch_ops,
477 .parts = &rpm8960_switch_parts,
478};
479
480/*
481 * PM8058 regulators
482 */
483static const struct qcom_rpm_reg pm8058_pldo = {
484 .desc.linear_ranges = pldo_ranges,
485 .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
486 .desc.n_voltages = 161,
487 .desc.ops = &mV_ops,
488 .parts = &rpm8660_ldo_parts,
489 .supports_force_mode_auto = false,
490 .supports_force_mode_bypass = false,
491};
492
493static const struct qcom_rpm_reg pm8058_nldo = {
494 .desc.linear_ranges = nldo_ranges,
495 .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
496 .desc.n_voltages = 64,
497 .desc.ops = &mV_ops,
498 .parts = &rpm8660_ldo_parts,
499 .supports_force_mode_auto = false,
500 .supports_force_mode_bypass = false,
501};
502
503static const struct qcom_rpm_reg pm8058_smps = {
504 .desc.linear_ranges = smps_ranges,
505 .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges),
506 .desc.n_voltages = 154,
507 .desc.ops = &mV_ops,
508 .parts = &rpm8660_smps_parts,
509 .supports_force_mode_auto = false,
510 .supports_force_mode_bypass = false,
511};
512
513static const struct qcom_rpm_reg pm8058_ncp = {
514 .desc.linear_ranges = ncp_ranges,
515 .desc.n_linear_ranges = ARRAY_SIZE(ncp_ranges),
516 .desc.n_voltages = 32,
517 .desc.ops = &mV_ops,
518 .parts = &rpm8660_ncp_parts,
519};
520
521static const struct qcom_rpm_reg pm8058_switch = {
522 .desc.ops = &switch_ops,
523 .parts = &rpm8660_switch_parts,
524};
525
526/*
527 * PM8901 regulators
528 */
529static const struct qcom_rpm_reg pm8901_pldo = {
530 .desc.linear_ranges = pldo_ranges,
531 .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
532 .desc.n_voltages = 161,
533 .desc.ops = &mV_ops,
534 .parts = &rpm8660_ldo_parts,
535 .supports_force_mode_auto = false,
536 .supports_force_mode_bypass = true,
537};
538
539static const struct qcom_rpm_reg pm8901_nldo = {
540 .desc.linear_ranges = nldo_ranges,
541 .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
542 .desc.n_voltages = 64,
543 .desc.ops = &mV_ops,
544 .parts = &rpm8660_ldo_parts,
545 .supports_force_mode_auto = false,
546 .supports_force_mode_bypass = true,
547};
548
549static const struct qcom_rpm_reg pm8901_ftsmps = {
550 .desc.linear_ranges = ftsmps_ranges,
551 .desc.n_linear_ranges = ARRAY_SIZE(ftsmps_ranges),
552 .desc.n_voltages = 101,
553 .desc.ops = &mV_ops,
554 .parts = &rpm8660_smps_parts,
555 .supports_force_mode_auto = true,
556 .supports_force_mode_bypass = false,
557};
558
559static const struct qcom_rpm_reg pm8901_switch = {
560 .desc.ops = &switch_ops,
561 .parts = &rpm8660_switch_parts,
562};
563
564/*
565 * PM8921 regulators
566 */
567static const struct qcom_rpm_reg pm8921_pldo = {
568 .desc.linear_ranges = pldo_ranges,
569 .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
570 .desc.n_voltages = 161,
571 .desc.ops = &uV_ops,
572 .parts = &rpm8960_ldo_parts,
573 .supports_force_mode_auto = false,
574 .supports_force_mode_bypass = true,
575};
576
577static const struct qcom_rpm_reg pm8921_nldo = {
578 .desc.linear_ranges = nldo_ranges,
579 .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
580 .desc.n_voltages = 64,
581 .desc.ops = &uV_ops,
582 .parts = &rpm8960_ldo_parts,
583 .supports_force_mode_auto = false,
584 .supports_force_mode_bypass = true,
585};
586
587static const struct qcom_rpm_reg pm8921_nldo1200 = {
588 .desc.linear_ranges = nldo1200_ranges,
589 .desc.n_linear_ranges = ARRAY_SIZE(nldo1200_ranges),
590 .desc.n_voltages = 124,
591 .desc.ops = &uV_ops,
592 .parts = &rpm8960_ldo_parts,
593 .supports_force_mode_auto = false,
594 .supports_force_mode_bypass = true,
595};
596
597static const struct qcom_rpm_reg pm8921_smps = {
598 .desc.linear_ranges = smps_ranges,
599 .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges),
600 .desc.n_voltages = 154,
601 .desc.ops = &uV_ops,
602 .parts = &rpm8960_smps_parts,
603 .supports_force_mode_auto = true,
604 .supports_force_mode_bypass = false,
605};
606
607static const struct qcom_rpm_reg pm8921_ncp = {
608 .desc.linear_ranges = ncp_ranges,
609 .desc.n_linear_ranges = ARRAY_SIZE(ncp_ranges),
610 .desc.n_voltages = 32,
611 .desc.ops = &uV_ops,
612 .parts = &rpm8960_ncp_parts,
613};
614
615static const struct qcom_rpm_reg pm8921_switch = {
616 .desc.ops = &switch_ops,
617 .parts = &rpm8960_switch_parts,
618};
619
620static const struct qcom_rpm_reg smb208_smps = {
621 .desc.linear_ranges = smb208_ranges,
622 .desc.n_linear_ranges = ARRAY_SIZE(smb208_ranges),
623 .desc.n_voltages = 235,
624 .desc.ops = &uV_ops,
625 .parts = &rpm8960_smps_parts,
626 .supports_force_mode_auto = false,
627 .supports_force_mode_bypass = false,
628};
629
630static int rpm_reg_set(struct qcom_rpm_reg *vreg,
631 const struct request_member *req,
632 const int value)
633{
634 if (req->mask == 0 || (value << req->shift) & ~req->mask)
635 return -EINVAL;
636
637 vreg->val[req->word] &= ~req->mask;
638 vreg->val[req->word] |= value << req->shift;
639
640 return 0;
641}
642
643static int rpm_reg_of_parse_freq(struct device *dev,
644 struct device_node *node,
645 struct qcom_rpm_reg *vreg)
646{
647 static const int freq_table[] = {
648 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, 2740000,
649 2400000, 2130000, 1920000, 1750000, 1600000, 1480000, 1370000,
650 1280000, 1200000,
651
652 };
653 const char *key;
654 u32 freq;
655 int ret;
656 int i;
657
658 key = "qcom,switch-mode-frequency";
659 ret = of_property_read_u32(np: node, propname: key, out_value: &freq);
660 if (ret) {
661 dev_err(dev, "regulator requires %s property\n", key);
662 return -EINVAL;
663 }
664
665 for (i = 0; i < ARRAY_SIZE(freq_table); i++) {
666 if (freq == freq_table[i]) {
667 rpm_reg_set(vreg, req: &vreg->parts->freq, value: i + 1);
668 return 0;
669 }
670 }
671
672 dev_err(dev, "invalid frequency %d\n", freq);
673 return -EINVAL;
674}
675
676static int rpm_reg_of_parse(struct device_node *node,
677 const struct regulator_desc *desc,
678 struct regulator_config *config)
679{
680 struct qcom_rpm_reg *vreg = config->driver_data;
681 struct device *dev = config->dev;
682 const char *key;
683 u32 force_mode;
684 bool pwm;
685 u32 val;
686 int ret;
687
688 key = "bias-pull-down";
689 if (of_property_read_bool(np: node, propname: key)) {
690 ret = rpm_reg_set(vreg, req: &vreg->parts->pd, value: 1);
691 if (ret) {
692 dev_err(dev, "%s is invalid", key);
693 return ret;
694 }
695 }
696
697 if (vreg->parts->freq.mask) {
698 ret = rpm_reg_of_parse_freq(dev, node, vreg);
699 if (ret < 0)
700 return ret;
701 }
702
703 if (vreg->parts->pm.mask) {
704 key = "qcom,power-mode-hysteretic";
705 pwm = !of_property_read_bool(np: node, propname: key);
706
707 ret = rpm_reg_set(vreg, req: &vreg->parts->pm, value: pwm);
708 if (ret) {
709 dev_err(dev, "failed to set power mode\n");
710 return ret;
711 }
712 }
713
714 if (vreg->parts->fm.mask) {
715 force_mode = -1;
716
717 key = "qcom,force-mode";
718 ret = of_property_read_u32(np: node, propname: key, out_value: &val);
719 if (ret == -EINVAL) {
720 val = QCOM_RPM_FORCE_MODE_NONE;
721 } else if (ret < 0) {
722 dev_err(dev, "failed to read %s\n", key);
723 return ret;
724 }
725
726 /*
727 * If force-mode is encoded as 2 bits then the
728 * possible register values are:
729 * NONE, LPM, HPM
730 * otherwise:
731 * NONE, LPM, AUTO, HPM, BYPASS
732 */
733 switch (val) {
734 case QCOM_RPM_FORCE_MODE_NONE:
735 force_mode = 0;
736 break;
737 case QCOM_RPM_FORCE_MODE_LPM:
738 force_mode = 1;
739 break;
740 case QCOM_RPM_FORCE_MODE_HPM:
741 if (FORCE_MODE_IS_2_BITS(vreg))
742 force_mode = 2;
743 else
744 force_mode = 3;
745 break;
746 case QCOM_RPM_FORCE_MODE_AUTO:
747 if (vreg->supports_force_mode_auto)
748 force_mode = 2;
749 break;
750 case QCOM_RPM_FORCE_MODE_BYPASS:
751 if (vreg->supports_force_mode_bypass)
752 force_mode = 4;
753 break;
754 }
755
756 if (force_mode == -1) {
757 dev_err(dev, "invalid force mode\n");
758 return -EINVAL;
759 }
760
761 ret = rpm_reg_set(vreg, req: &vreg->parts->fm, value: force_mode);
762 if (ret) {
763 dev_err(dev, "failed to set force mode\n");
764 return ret;
765 }
766 }
767
768 return 0;
769}
770
771struct rpm_regulator_data {
772 const char *name;
773 int resource;
774 const struct qcom_rpm_reg *template;
775 const char *supply;
776};
777
778static const struct rpm_regulator_data rpm_pm8018_regulators[] = {
779 { "s1", QCOM_RPM_PM8018_SMPS1, &pm8018_smps, "vdd_s1" },
780 { "s2", QCOM_RPM_PM8018_SMPS2, &pm8018_smps, "vdd_s2" },
781 { "s3", QCOM_RPM_PM8018_SMPS3, &pm8018_smps, "vdd_s3" },
782 { "s4", QCOM_RPM_PM8018_SMPS4, &pm8018_smps, "vdd_s4" },
783 { "s5", QCOM_RPM_PM8018_SMPS5, &pm8018_smps, "vdd_s5" },
784
785 { "l2", QCOM_RPM_PM8018_LDO2, &pm8018_pldo, "vdd_l2" },
786 { "l3", QCOM_RPM_PM8018_LDO3, &pm8018_pldo, "vdd_l3" },
787 { "l4", QCOM_RPM_PM8018_LDO4, &pm8018_pldo, "vdd_l4" },
788 { "l5", QCOM_RPM_PM8018_LDO5, &pm8018_pldo, "vdd_l5" },
789 { "l6", QCOM_RPM_PM8018_LDO6, &pm8018_pldo, "vdd_l7" },
790 { "l7", QCOM_RPM_PM8018_LDO7, &pm8018_pldo, "vdd_l7" },
791 { "l8", QCOM_RPM_PM8018_LDO8, &pm8018_nldo, "vdd_l8" },
792 { "l9", QCOM_RPM_PM8018_LDO9, &pm8921_nldo1200,
793 "vdd_l9_l10_l11_l12" },
794 { "l10", QCOM_RPM_PM8018_LDO10, &pm8018_nldo, "vdd_l9_l10_l11_l12" },
795 { "l11", QCOM_RPM_PM8018_LDO11, &pm8018_nldo, "vdd_l9_l10_l11_l12" },
796 { "l12", QCOM_RPM_PM8018_LDO12, &pm8018_nldo, "vdd_l9_l10_l11_l12" },
797 { "l14", QCOM_RPM_PM8018_LDO14, &pm8018_pldo, "vdd_l14" },
798
799 { "lvs1", QCOM_RPM_PM8018_LVS1, &pm8018_switch, "lvs1_in" },
800
801 { }
802};
803
804static const struct rpm_regulator_data rpm_pm8058_regulators[] = {
805 { "s0", QCOM_RPM_PM8058_SMPS0, &pm8058_smps, "vdd_s0" },
806 { "s1", QCOM_RPM_PM8058_SMPS1, &pm8058_smps, "vdd_s1" },
807 { "s2", QCOM_RPM_PM8058_SMPS2, &pm8058_smps, "vdd_s2" },
808 { "s3", QCOM_RPM_PM8058_SMPS3, &pm8058_smps, "vdd_s3" },
809 { "s4", QCOM_RPM_PM8058_SMPS4, &pm8058_smps, "vdd_s4" },
810
811 { "l0", QCOM_RPM_PM8058_LDO0, &pm8058_nldo, "vdd_l0_l1_lvs" },
812 { "l1", QCOM_RPM_PM8058_LDO1, &pm8058_nldo, "vdd_l0_l1_lvs" },
813 { "l2", QCOM_RPM_PM8058_LDO2, &pm8058_pldo, "vdd_l2_l11_l12" },
814 { "l3", QCOM_RPM_PM8058_LDO3, &pm8058_pldo, "vdd_l3_l4_l5" },
815 { "l4", QCOM_RPM_PM8058_LDO4, &pm8058_pldo, "vdd_l3_l4_l5" },
816 { "l5", QCOM_RPM_PM8058_LDO5, &pm8058_pldo, "vdd_l3_l4_l5" },
817 { "l6", QCOM_RPM_PM8058_LDO6, &pm8058_pldo, "vdd_l6_l7" },
818 { "l7", QCOM_RPM_PM8058_LDO7, &pm8058_pldo, "vdd_l6_l7" },
819 { "l8", QCOM_RPM_PM8058_LDO8, &pm8058_pldo, "vdd_l8" },
820 { "l9", QCOM_RPM_PM8058_LDO9, &pm8058_pldo, "vdd_l9" },
821 { "l10", QCOM_RPM_PM8058_LDO10, &pm8058_pldo, "vdd_l10" },
822 { "l11", QCOM_RPM_PM8058_LDO11, &pm8058_pldo, "vdd_l2_l11_l12" },
823 { "l12", QCOM_RPM_PM8058_LDO12, &pm8058_pldo, "vdd_l2_l11_l12" },
824 { "l13", QCOM_RPM_PM8058_LDO13, &pm8058_pldo, "vdd_l13_l16" },
825 { "l14", QCOM_RPM_PM8058_LDO14, &pm8058_pldo, "vdd_l14_l15" },
826 { "l15", QCOM_RPM_PM8058_LDO15, &pm8058_pldo, "vdd_l14_l15" },
827 { "l16", QCOM_RPM_PM8058_LDO16, &pm8058_pldo, "vdd_l13_l16" },
828 { "l17", QCOM_RPM_PM8058_LDO17, &pm8058_pldo, "vdd_l17_l18" },
829 { "l18", QCOM_RPM_PM8058_LDO18, &pm8058_pldo, "vdd_l17_l18" },
830 { "l19", QCOM_RPM_PM8058_LDO19, &pm8058_pldo, "vdd_l19_l20" },
831 { "l20", QCOM_RPM_PM8058_LDO20, &pm8058_pldo, "vdd_l19_l20" },
832 { "l21", QCOM_RPM_PM8058_LDO21, &pm8058_nldo, "vdd_l21" },
833 { "l22", QCOM_RPM_PM8058_LDO22, &pm8058_nldo, "vdd_l22" },
834 { "l23", QCOM_RPM_PM8058_LDO23, &pm8058_nldo, "vdd_l23_l24_l25" },
835 { "l24", QCOM_RPM_PM8058_LDO24, &pm8058_nldo, "vdd_l23_l24_l25" },
836 { "l25", QCOM_RPM_PM8058_LDO25, &pm8058_nldo, "vdd_l23_l24_l25" },
837
838 { "lvs0", QCOM_RPM_PM8058_LVS0, &pm8058_switch, "vdd_l0_l1_lvs" },
839 { "lvs1", QCOM_RPM_PM8058_LVS1, &pm8058_switch, "vdd_l0_l1_lvs" },
840
841 { "ncp", QCOM_RPM_PM8058_NCP, &pm8058_ncp, "vdd_ncp" },
842 { }
843};
844
845static const struct rpm_regulator_data rpm_pm8901_regulators[] = {
846 { "s0", QCOM_RPM_PM8901_SMPS0, &pm8901_ftsmps, "vdd_s0" },
847 { "s1", QCOM_RPM_PM8901_SMPS1, &pm8901_ftsmps, "vdd_s1" },
848 { "s2", QCOM_RPM_PM8901_SMPS2, &pm8901_ftsmps, "vdd_s2" },
849 { "s3", QCOM_RPM_PM8901_SMPS3, &pm8901_ftsmps, "vdd_s3" },
850 { "s4", QCOM_RPM_PM8901_SMPS4, &pm8901_ftsmps, "vdd_s4" },
851
852 { "l0", QCOM_RPM_PM8901_LDO0, &pm8901_nldo, "vdd_l0" },
853 { "l1", QCOM_RPM_PM8901_LDO1, &pm8901_pldo, "vdd_l1" },
854 { "l2", QCOM_RPM_PM8901_LDO2, &pm8901_pldo, "vdd_l2" },
855 { "l3", QCOM_RPM_PM8901_LDO3, &pm8901_pldo, "vdd_l3" },
856 { "l4", QCOM_RPM_PM8901_LDO4, &pm8901_pldo, "vdd_l4" },
857 { "l5", QCOM_RPM_PM8901_LDO5, &pm8901_pldo, "vdd_l5" },
858 { "l6", QCOM_RPM_PM8901_LDO6, &pm8901_pldo, "vdd_l6" },
859
860 { "lvs0", QCOM_RPM_PM8901_LVS0, &pm8901_switch, "lvs0_in" },
861 { "lvs1", QCOM_RPM_PM8901_LVS1, &pm8901_switch, "lvs1_in" },
862 { "lvs2", QCOM_RPM_PM8901_LVS2, &pm8901_switch, "lvs2_in" },
863 { "lvs3", QCOM_RPM_PM8901_LVS3, &pm8901_switch, "lvs3_in" },
864
865 { "mvs", QCOM_RPM_PM8901_MVS, &pm8901_switch, "mvs_in" },
866 { }
867};
868
869static const struct rpm_regulator_data rpm_pm8921_regulators[] = {
870 { "s1", QCOM_RPM_PM8921_SMPS1, &pm8921_smps, "vdd_s1" },
871 { "s2", QCOM_RPM_PM8921_SMPS2, &pm8921_smps, "vdd_s2" },
872 { "s3", QCOM_RPM_PM8921_SMPS3, &pm8921_smps },
873 { "s4", QCOM_RPM_PM8921_SMPS4, &pm8921_smps, "vdd_s4" },
874 { "s7", QCOM_RPM_PM8921_SMPS7, &pm8921_smps, "vdd_s7" },
875 { "s8", QCOM_RPM_PM8921_SMPS8, &pm8921_smps, "vdd_s8" },
876
877 { "l1", QCOM_RPM_PM8921_LDO1, &pm8921_nldo, "vdd_l1_l2_l12_l18" },
878 { "l2", QCOM_RPM_PM8921_LDO2, &pm8921_nldo, "vdd_l1_l2_l12_l18" },
879 { "l3", QCOM_RPM_PM8921_LDO3, &pm8921_pldo, "vdd_l3_l15_l17" },
880 { "l4", QCOM_RPM_PM8921_LDO4, &pm8921_pldo, "vdd_l4_l14" },
881 { "l5", QCOM_RPM_PM8921_LDO5, &pm8921_pldo, "vdd_l5_l8_l16" },
882 { "l6", QCOM_RPM_PM8921_LDO6, &pm8921_pldo, "vdd_l6_l7" },
883 { "l7", QCOM_RPM_PM8921_LDO7, &pm8921_pldo, "vdd_l6_l7" },
884 { "l8", QCOM_RPM_PM8921_LDO8, &pm8921_pldo, "vdd_l5_l8_l16" },
885 { "l9", QCOM_RPM_PM8921_LDO9, &pm8921_pldo, "vdd_l9_l11" },
886 { "l10", QCOM_RPM_PM8921_LDO10, &pm8921_pldo, "vdd_l10_l22" },
887 { "l11", QCOM_RPM_PM8921_LDO11, &pm8921_pldo, "vdd_l9_l11" },
888 { "l12", QCOM_RPM_PM8921_LDO12, &pm8921_nldo, "vdd_l1_l2_l12_l18" },
889 { "l14", QCOM_RPM_PM8921_LDO14, &pm8921_pldo, "vdd_l4_l14" },
890 { "l15", QCOM_RPM_PM8921_LDO15, &pm8921_pldo, "vdd_l3_l15_l17" },
891 { "l16", QCOM_RPM_PM8921_LDO16, &pm8921_pldo, "vdd_l5_l8_l16" },
892 { "l17", QCOM_RPM_PM8921_LDO17, &pm8921_pldo, "vdd_l3_l15_l17" },
893 { "l18", QCOM_RPM_PM8921_LDO18, &pm8921_nldo, "vdd_l1_l2_l12_l18" },
894 { "l21", QCOM_RPM_PM8921_LDO21, &pm8921_pldo, "vdd_l21_l23_l29" },
895 { "l22", QCOM_RPM_PM8921_LDO22, &pm8921_pldo, "vdd_l10_l22" },
896 { "l23", QCOM_RPM_PM8921_LDO23, &pm8921_pldo, "vdd_l21_l23_l29" },
897 { "l24", QCOM_RPM_PM8921_LDO24, &pm8921_nldo1200, "vdd_l24" },
898 { "l25", QCOM_RPM_PM8921_LDO25, &pm8921_nldo1200, "vdd_l25" },
899 { "l26", QCOM_RPM_PM8921_LDO26, &pm8921_nldo1200, "vdd_l26" },
900 { "l27", QCOM_RPM_PM8921_LDO27, &pm8921_nldo1200, "vdd_l27" },
901 { "l28", QCOM_RPM_PM8921_LDO28, &pm8921_nldo1200, "vdd_l28" },
902 { "l29", QCOM_RPM_PM8921_LDO29, &pm8921_pldo, "vdd_l21_l23_l29" },
903
904 { "lvs1", QCOM_RPM_PM8921_LVS1, &pm8921_switch, "vin_lvs1_3_6" },
905 { "lvs2", QCOM_RPM_PM8921_LVS2, &pm8921_switch, "vin_lvs2" },
906 { "lvs3", QCOM_RPM_PM8921_LVS3, &pm8921_switch, "vin_lvs1_3_6" },
907 { "lvs4", QCOM_RPM_PM8921_LVS4, &pm8921_switch, "vin_lvs4_5_7" },
908 { "lvs5", QCOM_RPM_PM8921_LVS5, &pm8921_switch, "vin_lvs4_5_7" },
909 { "lvs6", QCOM_RPM_PM8921_LVS6, &pm8921_switch, "vin_lvs1_3_6" },
910 { "lvs7", QCOM_RPM_PM8921_LVS7, &pm8921_switch, "vin_lvs4_5_7" },
911
912 { "usb-switch", QCOM_RPM_USB_OTG_SWITCH, &pm8921_switch, "vin_5vs" },
913 { "hdmi-switch", QCOM_RPM_HDMI_SWITCH, &pm8921_switch, "vin_5vs" },
914 { "ncp", QCOM_RPM_PM8921_NCP, &pm8921_ncp, "vdd_ncp" },
915 { }
916};
917
918static const struct rpm_regulator_data rpm_smb208_regulators[] = {
919 { "s1a", QCOM_RPM_SMB208_S1a, &smb208_smps, "vin_s1a" },
920 { "s1b", QCOM_RPM_SMB208_S1b, &smb208_smps, "vin_s1b" },
921 { "s2a", QCOM_RPM_SMB208_S2a, &smb208_smps, "vin_s2a" },
922 { "s2b", QCOM_RPM_SMB208_S2b, &smb208_smps, "vin_s2b" },
923 { }
924};
925
926static const struct of_device_id rpm_of_match[] = {
927 { .compatible = "qcom,rpm-pm8018-regulators",
928 .data = &rpm_pm8018_regulators },
929 { .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators },
930 { .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators },
931 { .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators },
932 { .compatible = "qcom,rpm-smb208-regulators", .data = &rpm_smb208_regulators },
933 { }
934};
935MODULE_DEVICE_TABLE(of, rpm_of_match);
936
937static int rpm_reg_probe(struct platform_device *pdev)
938{
939 const struct rpm_regulator_data *reg;
940 struct regulator_config config = { };
941 struct regulator_dev *rdev;
942 struct qcom_rpm_reg *vreg;
943 struct qcom_rpm *rpm;
944
945 rpm = dev_get_drvdata(dev: pdev->dev.parent);
946 if (!rpm) {
947 dev_err(&pdev->dev, "unable to retrieve handle to rpm\n");
948 return -ENODEV;
949 }
950
951 reg = device_get_match_data(dev: &pdev->dev);
952 if (!reg) {
953 dev_err(&pdev->dev, "failed to match device\n");
954 return -ENODEV;
955 }
956
957 for (; reg->name; reg++) {
958 vreg = devm_kmemdup(dev: &pdev->dev, src: reg->template, len: sizeof(*vreg), GFP_KERNEL);
959 if (!vreg)
960 return -ENOMEM;
961
962 mutex_init(&vreg->lock);
963
964 vreg->dev = &pdev->dev;
965 vreg->resource = reg->resource;
966 vreg->rpm = rpm;
967
968 vreg->desc.id = -1;
969 vreg->desc.owner = THIS_MODULE;
970 vreg->desc.type = REGULATOR_VOLTAGE;
971 vreg->desc.name = reg->name;
972 vreg->desc.supply_name = reg->supply;
973 vreg->desc.of_match = reg->name;
974 vreg->desc.of_parse_cb = rpm_reg_of_parse;
975
976 config.dev = &pdev->dev;
977 config.driver_data = vreg;
978 rdev = devm_regulator_register(dev: &pdev->dev, regulator_desc: &vreg->desc, config: &config);
979 if (IS_ERR(ptr: rdev)) {
980 dev_err(&pdev->dev, "failed to register %s\n", reg->name);
981 return PTR_ERR(ptr: rdev);
982 }
983 }
984
985 return 0;
986}
987
988static struct platform_driver rpm_reg_driver = {
989 .probe = rpm_reg_probe,
990 .driver = {
991 .name = "qcom_rpm_reg",
992 .probe_type = PROBE_PREFER_ASYNCHRONOUS,
993 .of_match_table = of_match_ptr(rpm_of_match),
994 },
995};
996
997static int __init rpm_reg_init(void)
998{
999 return platform_driver_register(&rpm_reg_driver);
1000}
1001subsys_initcall(rpm_reg_init);
1002
1003static void __exit rpm_reg_exit(void)
1004{
1005 platform_driver_unregister(&rpm_reg_driver);
1006}
1007module_exit(rpm_reg_exit)
1008
1009MODULE_DESCRIPTION("Qualcomm RPM regulator driver");
1010MODULE_LICENSE("GPL v2");
1011

source code of linux/drivers/regulator/qcom_rpm-regulator.c