| 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Memory controller driver for ARM PrimeCell PL172 |
| 4 | * PrimeCell MultiPort Memory Controller (PL172) |
| 5 | * |
| 6 | * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com> |
| 7 | * |
| 8 | * Based on: |
| 9 | * TI AEMIF driver, Copyright (C) 2010 - 2013 Texas Instruments Inc. |
| 10 | */ |
| 11 | |
| 12 | #include <linux/amba/bus.h> |
| 13 | #include <linux/clk.h> |
| 14 | #include <linux/device.h> |
| 15 | #include <linux/err.h> |
| 16 | #include <linux/init.h> |
| 17 | #include <linux/io.h> |
| 18 | #include <linux/kernel.h> |
| 19 | #include <linux/module.h> |
| 20 | #include <linux/of.h> |
| 21 | #include <linux/of_platform.h> |
| 22 | #include <linux/time.h> |
| 23 | |
| 24 | #define MPMC_STATIC_CFG(n) (0x200 + 0x20 * (n)) |
| 25 | #define MPMC_STATIC_CFG_MW_8BIT 0x0 |
| 26 | #define MPMC_STATIC_CFG_MW_16BIT 0x1 |
| 27 | #define MPMC_STATIC_CFG_MW_32BIT 0x2 |
| 28 | #define MPMC_STATIC_CFG_PM BIT(3) |
| 29 | #define MPMC_STATIC_CFG_PC BIT(6) |
| 30 | #define MPMC_STATIC_CFG_PB BIT(7) |
| 31 | #define MPMC_STATIC_CFG_EW BIT(8) |
| 32 | #define MPMC_STATIC_CFG_B BIT(19) |
| 33 | #define MPMC_STATIC_CFG_P BIT(20) |
| 34 | #define MPMC_STATIC_WAIT_WEN(n) (0x204 + 0x20 * (n)) |
| 35 | #define MPMC_STATIC_WAIT_WEN_MAX 0x0f |
| 36 | #define MPMC_STATIC_WAIT_OEN(n) (0x208 + 0x20 * (n)) |
| 37 | #define MPMC_STATIC_WAIT_OEN_MAX 0x0f |
| 38 | #define MPMC_STATIC_WAIT_RD(n) (0x20c + 0x20 * (n)) |
| 39 | #define MPMC_STATIC_WAIT_RD_MAX 0x1f |
| 40 | #define MPMC_STATIC_WAIT_PAGE(n) (0x210 + 0x20 * (n)) |
| 41 | #define MPMC_STATIC_WAIT_PAGE_MAX 0x1f |
| 42 | #define MPMC_STATIC_WAIT_WR(n) (0x214 + 0x20 * (n)) |
| 43 | #define MPMC_STATIC_WAIT_WR_MAX 0x1f |
| 44 | #define MPMC_STATIC_WAIT_TURN(n) (0x218 + 0x20 * (n)) |
| 45 | #define MPMC_STATIC_WAIT_TURN_MAX 0x0f |
| 46 | |
| 47 | /* Maximum number of static chip selects */ |
| 48 | #define PL172_MAX_CS 4 |
| 49 | |
| 50 | struct pl172_data { |
| 51 | void __iomem *base; |
| 52 | unsigned long rate; |
| 53 | struct clk *clk; |
| 54 | }; |
| 55 | |
| 56 | static int pl172_timing_prop(struct amba_device *adev, |
| 57 | const struct device_node *np, const char *name, |
| 58 | u32 reg_offset, u32 max, int start) |
| 59 | { |
| 60 | struct pl172_data *pl172 = amba_get_drvdata(adev); |
| 61 | int cycles; |
| 62 | u32 val; |
| 63 | |
| 64 | if (!of_property_read_u32(np, propname: name, out_value: &val)) { |
| 65 | cycles = DIV_ROUND_UP(val * pl172->rate, NSEC_PER_MSEC) - start; |
| 66 | if (cycles < 0) { |
| 67 | cycles = 0; |
| 68 | } else if (cycles > max) { |
| 69 | dev_err(&adev->dev, "%s timing too tight\n" , name); |
| 70 | return -EINVAL; |
| 71 | } |
| 72 | |
| 73 | writel(val: cycles, addr: pl172->base + reg_offset); |
| 74 | } |
| 75 | |
| 76 | dev_dbg(&adev->dev, "%s: %u cycle(s)\n" , name, start + |
| 77 | readl(pl172->base + reg_offset)); |
| 78 | |
| 79 | return 0; |
| 80 | } |
| 81 | |
| 82 | static int pl172_setup_static(struct amba_device *adev, |
| 83 | struct device_node *np, u32 cs) |
| 84 | { |
| 85 | struct pl172_data *pl172 = amba_get_drvdata(adev); |
| 86 | u32 cfg; |
| 87 | int ret; |
| 88 | |
| 89 | /* MPMC static memory configuration */ |
| 90 | if (!of_property_read_u32(np, propname: "mpmc,memory-width" , out_value: &cfg)) { |
| 91 | if (cfg == 8) { |
| 92 | cfg = MPMC_STATIC_CFG_MW_8BIT; |
| 93 | } else if (cfg == 16) { |
| 94 | cfg = MPMC_STATIC_CFG_MW_16BIT; |
| 95 | } else if (cfg == 32) { |
| 96 | cfg = MPMC_STATIC_CFG_MW_32BIT; |
| 97 | } else { |
| 98 | dev_err(&adev->dev, "invalid memory width cs%u\n" , cs); |
| 99 | return -EINVAL; |
| 100 | } |
| 101 | } else { |
| 102 | dev_err(&adev->dev, "memory-width property required\n" ); |
| 103 | return -EINVAL; |
| 104 | } |
| 105 | |
| 106 | if (of_property_read_bool(np, propname: "mpmc,async-page-mode" )) |
| 107 | cfg |= MPMC_STATIC_CFG_PM; |
| 108 | |
| 109 | if (of_property_read_bool(np, propname: "mpmc,cs-active-high" )) |
| 110 | cfg |= MPMC_STATIC_CFG_PC; |
| 111 | |
| 112 | if (of_property_read_bool(np, propname: "mpmc,byte-lane-low" )) |
| 113 | cfg |= MPMC_STATIC_CFG_PB; |
| 114 | |
| 115 | if (of_property_read_bool(np, propname: "mpmc,extended-wait" )) |
| 116 | cfg |= MPMC_STATIC_CFG_EW; |
| 117 | |
| 118 | if (amba_part(adev) == 0x172 && |
| 119 | of_property_read_bool(np, propname: "mpmc,buffer-enable" )) |
| 120 | cfg |= MPMC_STATIC_CFG_B; |
| 121 | |
| 122 | if (of_property_read_bool(np, propname: "mpmc,write-protect" )) |
| 123 | cfg |= MPMC_STATIC_CFG_P; |
| 124 | |
| 125 | writel(val: cfg, addr: pl172->base + MPMC_STATIC_CFG(cs)); |
| 126 | dev_dbg(&adev->dev, "mpmc static config cs%u: 0x%08x\n" , cs, cfg); |
| 127 | |
| 128 | /* MPMC static memory timing */ |
| 129 | ret = pl172_timing_prop(adev, np, name: "mpmc,write-enable-delay" , |
| 130 | MPMC_STATIC_WAIT_WEN(cs), |
| 131 | MPMC_STATIC_WAIT_WEN_MAX, start: 1); |
| 132 | if (ret) |
| 133 | goto fail; |
| 134 | |
| 135 | ret = pl172_timing_prop(adev, np, name: "mpmc,output-enable-delay" , |
| 136 | MPMC_STATIC_WAIT_OEN(cs), |
| 137 | MPMC_STATIC_WAIT_OEN_MAX, start: 0); |
| 138 | if (ret) |
| 139 | goto fail; |
| 140 | |
| 141 | ret = pl172_timing_prop(adev, np, name: "mpmc,read-access-delay" , |
| 142 | MPMC_STATIC_WAIT_RD(cs), |
| 143 | MPMC_STATIC_WAIT_RD_MAX, start: 1); |
| 144 | if (ret) |
| 145 | goto fail; |
| 146 | |
| 147 | ret = pl172_timing_prop(adev, np, name: "mpmc,page-mode-read-delay" , |
| 148 | MPMC_STATIC_WAIT_PAGE(cs), |
| 149 | MPMC_STATIC_WAIT_PAGE_MAX, start: 1); |
| 150 | if (ret) |
| 151 | goto fail; |
| 152 | |
| 153 | ret = pl172_timing_prop(adev, np, name: "mpmc,write-access-delay" , |
| 154 | MPMC_STATIC_WAIT_WR(cs), |
| 155 | MPMC_STATIC_WAIT_WR_MAX, start: 2); |
| 156 | if (ret) |
| 157 | goto fail; |
| 158 | |
| 159 | ret = pl172_timing_prop(adev, np, name: "mpmc,turn-round-delay" , |
| 160 | MPMC_STATIC_WAIT_TURN(cs), |
| 161 | MPMC_STATIC_WAIT_TURN_MAX, start: 1); |
| 162 | if (ret) |
| 163 | goto fail; |
| 164 | |
| 165 | return 0; |
| 166 | fail: |
| 167 | dev_err(&adev->dev, "failed to configure cs%u\n" , cs); |
| 168 | return ret; |
| 169 | } |
| 170 | |
| 171 | static int pl172_parse_cs_config(struct amba_device *adev, |
| 172 | struct device_node *np) |
| 173 | { |
| 174 | u32 cs; |
| 175 | |
| 176 | if (!of_property_read_u32(np, propname: "mpmc,cs" , out_value: &cs)) { |
| 177 | if (cs >= PL172_MAX_CS) { |
| 178 | dev_err(&adev->dev, "cs%u invalid\n" , cs); |
| 179 | return -EINVAL; |
| 180 | } |
| 181 | |
| 182 | return pl172_setup_static(adev, np, cs); |
| 183 | } |
| 184 | |
| 185 | dev_err(&adev->dev, "cs property required\n" ); |
| 186 | |
| 187 | return -EINVAL; |
| 188 | } |
| 189 | |
| 190 | static void pl172_amba_release_regions(void *data) |
| 191 | { |
| 192 | struct amba_device *adev = data; |
| 193 | |
| 194 | amba_release_regions(adev); |
| 195 | } |
| 196 | |
| 197 | static const char * const pl172_revisions[] = {"r1" , "r2" , "r2p3" , "r2p4" }; |
| 198 | static const char * const pl175_revisions[] = {"r1" }; |
| 199 | static const char * const pl176_revisions[] = {"r0" }; |
| 200 | |
| 201 | static int pl172_probe(struct amba_device *adev, const struct amba_id *id) |
| 202 | { |
| 203 | struct device_node *child_np, *np = adev->dev.of_node; |
| 204 | struct device *dev = &adev->dev; |
| 205 | static const char *rev = "?" ; |
| 206 | struct pl172_data *pl172; |
| 207 | int ret; |
| 208 | |
| 209 | if (amba_part(adev) == 0x172) { |
| 210 | if (amba_rev(adev) < ARRAY_SIZE(pl172_revisions)) |
| 211 | rev = pl172_revisions[amba_rev(adev)]; |
| 212 | } else if (amba_part(adev) == 0x175) { |
| 213 | if (amba_rev(adev) < ARRAY_SIZE(pl175_revisions)) |
| 214 | rev = pl175_revisions[amba_rev(adev)]; |
| 215 | } else if (amba_part(adev) == 0x176) { |
| 216 | if (amba_rev(adev) < ARRAY_SIZE(pl176_revisions)) |
| 217 | rev = pl176_revisions[amba_rev(adev)]; |
| 218 | } |
| 219 | |
| 220 | dev_info(dev, "ARM PL%x revision %s\n" , amba_part(adev), rev); |
| 221 | |
| 222 | pl172 = devm_kzalloc(dev, size: sizeof(*pl172), GFP_KERNEL); |
| 223 | if (!pl172) |
| 224 | return -ENOMEM; |
| 225 | |
| 226 | pl172->clk = devm_clk_get_enabled(dev, id: "mpmcclk" ); |
| 227 | if (IS_ERR(ptr: pl172->clk)) |
| 228 | return dev_err_probe(dev, err: PTR_ERR(ptr: pl172->clk), |
| 229 | fmt: "no mpmcclk provided clock\n" ); |
| 230 | |
| 231 | pl172->rate = clk_get_rate(clk: pl172->clk) / MSEC_PER_SEC; |
| 232 | if (!pl172->rate) |
| 233 | return dev_err_probe(dev, err: -EINVAL, |
| 234 | fmt: "unable to get mpmcclk clock rate\n" ); |
| 235 | |
| 236 | ret = amba_request_regions(adev, NULL); |
| 237 | if (ret) { |
| 238 | dev_err(dev, "unable to request AMBA regions\n" ); |
| 239 | return ret; |
| 240 | } |
| 241 | |
| 242 | ret = devm_add_action_or_reset(dev, pl172_amba_release_regions, adev); |
| 243 | if (ret) |
| 244 | return ret; |
| 245 | |
| 246 | pl172->base = devm_ioremap(dev, offset: adev->res.start, |
| 247 | size: resource_size(res: &adev->res)); |
| 248 | if (!pl172->base) |
| 249 | return dev_err_probe(dev, err: -ENOMEM, fmt: "ioremap failed\n" ); |
| 250 | |
| 251 | amba_set_drvdata(adev, pl172); |
| 252 | |
| 253 | /* |
| 254 | * Loop through each child node, which represent a chip select, and |
| 255 | * configure parameters and timing. If successful; populate devices |
| 256 | * under that node. |
| 257 | */ |
| 258 | for_each_available_child_of_node(np, child_np) { |
| 259 | ret = pl172_parse_cs_config(adev, np: child_np); |
| 260 | if (ret) |
| 261 | continue; |
| 262 | |
| 263 | of_platform_populate(root: child_np, NULL, NULL, parent: dev); |
| 264 | } |
| 265 | |
| 266 | return 0; |
| 267 | } |
| 268 | |
| 269 | static const struct amba_id pl172_ids[] = { |
| 270 | /* PrimeCell MPMC PL172, EMC found on NXP LPC18xx and LPC43xx */ |
| 271 | { |
| 272 | .id = 0x07041172, |
| 273 | .mask = 0x3f0fffff, |
| 274 | }, |
| 275 | /* PrimeCell MPMC PL175, EMC found on NXP LPC32xx */ |
| 276 | { |
| 277 | .id = 0x07041175, |
| 278 | .mask = 0x3f0fffff, |
| 279 | }, |
| 280 | /* PrimeCell MPMC PL176 */ |
| 281 | { |
| 282 | .id = 0x89041176, |
| 283 | .mask = 0xff0fffff, |
| 284 | }, |
| 285 | { 0, 0 }, |
| 286 | }; |
| 287 | MODULE_DEVICE_TABLE(amba, pl172_ids); |
| 288 | |
| 289 | static struct amba_driver pl172_driver = { |
| 290 | .drv = { |
| 291 | .name = "memory-pl172" , |
| 292 | }, |
| 293 | .probe = pl172_probe, |
| 294 | .id_table = pl172_ids, |
| 295 | }; |
| 296 | module_amba_driver(pl172_driver); |
| 297 | |
| 298 | MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>" ); |
| 299 | MODULE_DESCRIPTION("PL172 Memory Controller Driver" ); |
| 300 | MODULE_LICENSE("GPL v2" ); |
| 301 | |