1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * vmk80xx.c
4 * Velleman USB Board Low-Level Driver
5 *
6 * Copyright (C) 2009 Manuel Gebele <forensixs@gmx.de>, Germany
7 *
8 * COMEDI - Linux Control and Measurement Device Interface
9 * Copyright (C) 2000 David A. Schleef <ds@schleef.org>
10 */
11
12/*
13 * Driver: vmk80xx
14 * Description: Velleman USB Board Low-Level Driver
15 * Devices: [Velleman] K8055 (K8055/VM110), K8061 (K8061/VM140),
16 * VM110 (K8055/VM110), VM140 (K8061/VM140)
17 * Author: Manuel Gebele <forensixs@gmx.de>
18 * Updated: Sun, 10 May 2009 11:14:59 +0200
19 * Status: works
20 *
21 * Supports:
22 * - analog input
23 * - analog output
24 * - digital input
25 * - digital output
26 * - counter
27 * - pwm
28 */
29
30#include <linux/kernel.h>
31#include <linux/module.h>
32#include <linux/mutex.h>
33#include <linux/errno.h>
34#include <linux/input.h>
35#include <linux/slab.h>
36#include <linux/poll.h>
37#include <linux/uaccess.h>
38#include <linux/comedi/comedi_usb.h>
39
40enum {
41 DEVICE_VMK8055,
42 DEVICE_VMK8061
43};
44
45#define VMK8055_DI_REG 0x00
46#define VMK8055_DO_REG 0x01
47#define VMK8055_AO1_REG 0x02
48#define VMK8055_AO2_REG 0x03
49#define VMK8055_AI1_REG 0x02
50#define VMK8055_AI2_REG 0x03
51#define VMK8055_CNT1_REG 0x04
52#define VMK8055_CNT2_REG 0x06
53
54#define VMK8061_CH_REG 0x01
55#define VMK8061_DI_REG 0x01
56#define VMK8061_DO_REG 0x01
57#define VMK8061_PWM_REG1 0x01
58#define VMK8061_PWM_REG2 0x02
59#define VMK8061_CNT_REG 0x02
60#define VMK8061_AO_REG 0x02
61#define VMK8061_AI_REG1 0x02
62#define VMK8061_AI_REG2 0x03
63
64#define VMK8055_CMD_RST 0x00
65#define VMK8055_CMD_DEB1_TIME 0x01
66#define VMK8055_CMD_DEB2_TIME 0x02
67#define VMK8055_CMD_RST_CNT1 0x03
68#define VMK8055_CMD_RST_CNT2 0x04
69#define VMK8055_CMD_WRT_AD 0x05
70
71#define VMK8061_CMD_RD_AI 0x00
72#define VMK8061_CMR_RD_ALL_AI 0x01 /* !non-active! */
73#define VMK8061_CMD_SET_AO 0x02
74#define VMK8061_CMD_SET_ALL_AO 0x03 /* !non-active! */
75#define VMK8061_CMD_OUT_PWM 0x04
76#define VMK8061_CMD_RD_DI 0x05
77#define VMK8061_CMD_DO 0x06 /* !non-active! */
78#define VMK8061_CMD_CLR_DO 0x07
79#define VMK8061_CMD_SET_DO 0x08
80#define VMK8061_CMD_RD_CNT 0x09 /* TODO: completely pointless? */
81#define VMK8061_CMD_RST_CNT 0x0a /* TODO: completely pointless? */
82#define VMK8061_CMD_RD_VERSION 0x0b /* internal usage */
83#define VMK8061_CMD_RD_JMP_STAT 0x0c /* TODO: not implemented yet */
84#define VMK8061_CMD_RD_PWR_STAT 0x0d /* internal usage */
85#define VMK8061_CMD_RD_DO 0x0e
86#define VMK8061_CMD_RD_AO 0x0f
87#define VMK8061_CMD_RD_PWM 0x10
88
89#define IC3_VERSION BIT(0)
90#define IC6_VERSION BIT(1)
91
92#define MIN_BUF_SIZE 64
93#define PACKET_TIMEOUT 10000 /* ms */
94
95enum vmk80xx_model {
96 VMK8055_MODEL,
97 VMK8061_MODEL
98};
99
100static const struct comedi_lrange vmk8061_range = {
101 2, {
102 UNI_RANGE(5),
103 UNI_RANGE(10)
104 }
105};
106
107struct vmk80xx_board {
108 const char *name;
109 enum vmk80xx_model model;
110 const struct comedi_lrange *range;
111 int ai_nchans;
112 unsigned int ai_maxdata;
113 int ao_nchans;
114 int di_nchans;
115 unsigned int cnt_maxdata;
116 int pwm_nchans;
117 unsigned int pwm_maxdata;
118};
119
120static const struct vmk80xx_board vmk80xx_boardinfo[] = {
121 [DEVICE_VMK8055] = {
122 .name = "K8055 (VM110)",
123 .model = VMK8055_MODEL,
124 .range = &range_unipolar5,
125 .ai_nchans = 2,
126 .ai_maxdata = 0x00ff,
127 .ao_nchans = 2,
128 .di_nchans = 6,
129 .cnt_maxdata = 0xffff,
130 },
131 [DEVICE_VMK8061] = {
132 .name = "K8061 (VM140)",
133 .model = VMK8061_MODEL,
134 .range = &vmk8061_range,
135 .ai_nchans = 8,
136 .ai_maxdata = 0x03ff,
137 .ao_nchans = 8,
138 .di_nchans = 8,
139 .cnt_maxdata = 0, /* unknown, device is not writeable */
140 .pwm_nchans = 1,
141 .pwm_maxdata = 0x03ff,
142 },
143};
144
145struct vmk80xx_private {
146 struct usb_endpoint_descriptor *ep_rx;
147 struct usb_endpoint_descriptor *ep_tx;
148 struct semaphore limit_sem;
149 unsigned char *usb_rx_buf;
150 unsigned char *usb_tx_buf;
151 enum vmk80xx_model model;
152};
153
154static void vmk80xx_do_bulk_msg(struct comedi_device *dev)
155{
156 struct vmk80xx_private *devpriv = dev->private;
157 struct usb_device *usb = comedi_to_usb_dev(dev);
158 __u8 tx_addr;
159 __u8 rx_addr;
160 unsigned int tx_pipe;
161 unsigned int rx_pipe;
162 size_t tx_size;
163 size_t rx_size;
164
165 tx_addr = devpriv->ep_tx->bEndpointAddress;
166 rx_addr = devpriv->ep_rx->bEndpointAddress;
167 tx_pipe = usb_sndbulkpipe(usb, tx_addr);
168 rx_pipe = usb_rcvbulkpipe(usb, rx_addr);
169 tx_size = usb_endpoint_maxp(epd: devpriv->ep_tx);
170 rx_size = usb_endpoint_maxp(epd: devpriv->ep_rx);
171
172 usb_bulk_msg(usb_dev: usb, pipe: tx_pipe, data: devpriv->usb_tx_buf, len: tx_size, NULL,
173 PACKET_TIMEOUT);
174
175 usb_bulk_msg(usb_dev: usb, pipe: rx_pipe, data: devpriv->usb_rx_buf, len: rx_size, NULL,
176 PACKET_TIMEOUT);
177}
178
179static int vmk80xx_read_packet(struct comedi_device *dev)
180{
181 struct vmk80xx_private *devpriv = dev->private;
182 struct usb_device *usb = comedi_to_usb_dev(dev);
183 struct usb_endpoint_descriptor *ep;
184 unsigned int pipe;
185
186 if (devpriv->model == VMK8061_MODEL) {
187 vmk80xx_do_bulk_msg(dev);
188 return 0;
189 }
190
191 ep = devpriv->ep_rx;
192 pipe = usb_rcvintpipe(usb, ep->bEndpointAddress);
193 return usb_interrupt_msg(usb_dev: usb, pipe, data: devpriv->usb_rx_buf,
194 len: usb_endpoint_maxp(epd: ep), NULL,
195 PACKET_TIMEOUT);
196}
197
198static int vmk80xx_write_packet(struct comedi_device *dev, int cmd)
199{
200 struct vmk80xx_private *devpriv = dev->private;
201 struct usb_device *usb = comedi_to_usb_dev(dev);
202 struct usb_endpoint_descriptor *ep;
203 unsigned int pipe;
204
205 devpriv->usb_tx_buf[0] = cmd;
206
207 if (devpriv->model == VMK8061_MODEL) {
208 vmk80xx_do_bulk_msg(dev);
209 return 0;
210 }
211
212 ep = devpriv->ep_tx;
213 pipe = usb_sndintpipe(usb, ep->bEndpointAddress);
214 return usb_interrupt_msg(usb_dev: usb, pipe, data: devpriv->usb_tx_buf,
215 len: usb_endpoint_maxp(epd: ep), NULL,
216 PACKET_TIMEOUT);
217}
218
219static int vmk80xx_reset_device(struct comedi_device *dev)
220{
221 struct vmk80xx_private *devpriv = dev->private;
222 size_t size;
223 int retval;
224
225 size = usb_endpoint_maxp(epd: devpriv->ep_tx);
226 memset(devpriv->usb_tx_buf, 0, size);
227 retval = vmk80xx_write_packet(dev, VMK8055_CMD_RST);
228 if (retval)
229 return retval;
230 /* set outputs to known state as we cannot read them */
231 return vmk80xx_write_packet(dev, VMK8055_CMD_WRT_AD);
232}
233
234static int vmk80xx_ai_insn_read(struct comedi_device *dev,
235 struct comedi_subdevice *s,
236 struct comedi_insn *insn,
237 unsigned int *data)
238{
239 struct vmk80xx_private *devpriv = dev->private;
240 int chan;
241 int reg[2];
242 int n;
243
244 down(sem: &devpriv->limit_sem);
245 chan = CR_CHAN(insn->chanspec);
246
247 switch (devpriv->model) {
248 case VMK8055_MODEL:
249 if (!chan)
250 reg[0] = VMK8055_AI1_REG;
251 else
252 reg[0] = VMK8055_AI2_REG;
253 break;
254 case VMK8061_MODEL:
255 default:
256 reg[0] = VMK8061_AI_REG1;
257 reg[1] = VMK8061_AI_REG2;
258 devpriv->usb_tx_buf[0] = VMK8061_CMD_RD_AI;
259 devpriv->usb_tx_buf[VMK8061_CH_REG] = chan;
260 break;
261 }
262
263 for (n = 0; n < insn->n; n++) {
264 if (vmk80xx_read_packet(dev))
265 break;
266
267 if (devpriv->model == VMK8055_MODEL) {
268 data[n] = devpriv->usb_rx_buf[reg[0]];
269 continue;
270 }
271
272 /* VMK8061_MODEL */
273 data[n] = devpriv->usb_rx_buf[reg[0]] + 256 *
274 devpriv->usb_rx_buf[reg[1]];
275 }
276
277 up(sem: &devpriv->limit_sem);
278
279 return n;
280}
281
282static int vmk80xx_ao_insn_write(struct comedi_device *dev,
283 struct comedi_subdevice *s,
284 struct comedi_insn *insn,
285 unsigned int *data)
286{
287 struct vmk80xx_private *devpriv = dev->private;
288 int chan;
289 int cmd;
290 int reg;
291 int n;
292
293 down(sem: &devpriv->limit_sem);
294 chan = CR_CHAN(insn->chanspec);
295
296 switch (devpriv->model) {
297 case VMK8055_MODEL:
298 cmd = VMK8055_CMD_WRT_AD;
299 if (!chan)
300 reg = VMK8055_AO1_REG;
301 else
302 reg = VMK8055_AO2_REG;
303 break;
304 default: /* NOTE: avoid compiler warnings */
305 cmd = VMK8061_CMD_SET_AO;
306 reg = VMK8061_AO_REG;
307 devpriv->usb_tx_buf[VMK8061_CH_REG] = chan;
308 break;
309 }
310
311 for (n = 0; n < insn->n; n++) {
312 devpriv->usb_tx_buf[reg] = data[n];
313
314 if (vmk80xx_write_packet(dev, cmd))
315 break;
316 }
317
318 up(sem: &devpriv->limit_sem);
319
320 return n;
321}
322
323static int vmk80xx_ao_insn_read(struct comedi_device *dev,
324 struct comedi_subdevice *s,
325 struct comedi_insn *insn,
326 unsigned int *data)
327{
328 struct vmk80xx_private *devpriv = dev->private;
329 int chan;
330 int reg;
331 int n;
332
333 down(sem: &devpriv->limit_sem);
334 chan = CR_CHAN(insn->chanspec);
335
336 reg = VMK8061_AO_REG - 1;
337
338 devpriv->usb_tx_buf[0] = VMK8061_CMD_RD_AO;
339
340 for (n = 0; n < insn->n; n++) {
341 if (vmk80xx_read_packet(dev))
342 break;
343
344 data[n] = devpriv->usb_rx_buf[reg + chan];
345 }
346
347 up(sem: &devpriv->limit_sem);
348
349 return n;
350}
351
352static int vmk80xx_di_insn_bits(struct comedi_device *dev,
353 struct comedi_subdevice *s,
354 struct comedi_insn *insn,
355 unsigned int *data)
356{
357 struct vmk80xx_private *devpriv = dev->private;
358 unsigned char *rx_buf;
359 int reg;
360 int retval;
361
362 down(sem: &devpriv->limit_sem);
363
364 rx_buf = devpriv->usb_rx_buf;
365
366 if (devpriv->model == VMK8061_MODEL) {
367 reg = VMK8061_DI_REG;
368 devpriv->usb_tx_buf[0] = VMK8061_CMD_RD_DI;
369 } else {
370 reg = VMK8055_DI_REG;
371 }
372
373 retval = vmk80xx_read_packet(dev);
374
375 if (!retval) {
376 if (devpriv->model == VMK8055_MODEL)
377 data[1] = (((rx_buf[reg] >> 4) & 0x03) |
378 ((rx_buf[reg] << 2) & 0x04) |
379 ((rx_buf[reg] >> 3) & 0x18));
380 else
381 data[1] = rx_buf[reg];
382
383 retval = 2;
384 }
385
386 up(sem: &devpriv->limit_sem);
387
388 return retval;
389}
390
391static int vmk80xx_do_insn_bits(struct comedi_device *dev,
392 struct comedi_subdevice *s,
393 struct comedi_insn *insn,
394 unsigned int *data)
395{
396 struct vmk80xx_private *devpriv = dev->private;
397 unsigned char *rx_buf = devpriv->usb_rx_buf;
398 unsigned char *tx_buf = devpriv->usb_tx_buf;
399 int reg, cmd;
400 int ret = 0;
401
402 if (devpriv->model == VMK8061_MODEL) {
403 reg = VMK8061_DO_REG;
404 cmd = VMK8061_CMD_DO;
405 } else { /* VMK8055_MODEL */
406 reg = VMK8055_DO_REG;
407 cmd = VMK8055_CMD_WRT_AD;
408 }
409
410 down(sem: &devpriv->limit_sem);
411
412 if (comedi_dio_update_state(s, data)) {
413 tx_buf[reg] = s->state;
414 ret = vmk80xx_write_packet(dev, cmd);
415 if (ret)
416 goto out;
417 }
418
419 if (devpriv->model == VMK8061_MODEL) {
420 tx_buf[0] = VMK8061_CMD_RD_DO;
421 ret = vmk80xx_read_packet(dev);
422 if (ret)
423 goto out;
424 data[1] = rx_buf[reg];
425 } else {
426 data[1] = s->state;
427 }
428
429out:
430 up(sem: &devpriv->limit_sem);
431
432 return ret ? ret : insn->n;
433}
434
435static int vmk80xx_cnt_insn_read(struct comedi_device *dev,
436 struct comedi_subdevice *s,
437 struct comedi_insn *insn,
438 unsigned int *data)
439{
440 struct vmk80xx_private *devpriv = dev->private;
441 int chan;
442 int reg[2];
443 int n;
444
445 down(sem: &devpriv->limit_sem);
446 chan = CR_CHAN(insn->chanspec);
447
448 switch (devpriv->model) {
449 case VMK8055_MODEL:
450 if (!chan)
451 reg[0] = VMK8055_CNT1_REG;
452 else
453 reg[0] = VMK8055_CNT2_REG;
454 break;
455 case VMK8061_MODEL:
456 default:
457 reg[0] = VMK8061_CNT_REG;
458 reg[1] = VMK8061_CNT_REG;
459 devpriv->usb_tx_buf[0] = VMK8061_CMD_RD_CNT;
460 break;
461 }
462
463 for (n = 0; n < insn->n; n++) {
464 if (vmk80xx_read_packet(dev))
465 break;
466
467 if (devpriv->model == VMK8055_MODEL)
468 data[n] = devpriv->usb_rx_buf[reg[0]];
469 else /* VMK8061_MODEL */
470 data[n] = devpriv->usb_rx_buf[reg[0] * (chan + 1) + 1]
471 + 256 * devpriv->usb_rx_buf[reg[1] * 2 + 2];
472 }
473
474 up(sem: &devpriv->limit_sem);
475
476 return n;
477}
478
479static int vmk80xx_cnt_insn_config(struct comedi_device *dev,
480 struct comedi_subdevice *s,
481 struct comedi_insn *insn,
482 unsigned int *data)
483{
484 struct vmk80xx_private *devpriv = dev->private;
485 unsigned int chan = CR_CHAN(insn->chanspec);
486 int cmd;
487 int reg;
488 int ret;
489
490 down(sem: &devpriv->limit_sem);
491 switch (data[0]) {
492 case INSN_CONFIG_RESET:
493 if (devpriv->model == VMK8055_MODEL) {
494 if (!chan) {
495 cmd = VMK8055_CMD_RST_CNT1;
496 reg = VMK8055_CNT1_REG;
497 } else {
498 cmd = VMK8055_CMD_RST_CNT2;
499 reg = VMK8055_CNT2_REG;
500 }
501 devpriv->usb_tx_buf[reg] = 0x00;
502 } else {
503 cmd = VMK8061_CMD_RST_CNT;
504 }
505 ret = vmk80xx_write_packet(dev, cmd);
506 break;
507 default:
508 ret = -EINVAL;
509 break;
510 }
511 up(sem: &devpriv->limit_sem);
512
513 return ret ? ret : insn->n;
514}
515
516static int vmk80xx_cnt_insn_write(struct comedi_device *dev,
517 struct comedi_subdevice *s,
518 struct comedi_insn *insn,
519 unsigned int *data)
520{
521 struct vmk80xx_private *devpriv = dev->private;
522 unsigned long debtime;
523 unsigned long val;
524 int chan;
525 int cmd;
526 int n;
527
528 down(sem: &devpriv->limit_sem);
529 chan = CR_CHAN(insn->chanspec);
530
531 if (!chan)
532 cmd = VMK8055_CMD_DEB1_TIME;
533 else
534 cmd = VMK8055_CMD_DEB2_TIME;
535
536 for (n = 0; n < insn->n; n++) {
537 debtime = data[n];
538 if (debtime == 0)
539 debtime = 1;
540
541 /* TODO: Prevent overflows */
542 if (debtime > 7450)
543 debtime = 7450;
544
545 val = int_sqrt(debtime * 1000 / 115);
546 if (((val + 1) * val) < debtime * 1000 / 115)
547 val += 1;
548
549 devpriv->usb_tx_buf[6 + chan] = val;
550
551 if (vmk80xx_write_packet(dev, cmd))
552 break;
553 }
554
555 up(sem: &devpriv->limit_sem);
556
557 return n;
558}
559
560static int vmk80xx_pwm_insn_read(struct comedi_device *dev,
561 struct comedi_subdevice *s,
562 struct comedi_insn *insn,
563 unsigned int *data)
564{
565 struct vmk80xx_private *devpriv = dev->private;
566 unsigned char *tx_buf;
567 unsigned char *rx_buf;
568 int reg[2];
569 int n;
570
571 down(sem: &devpriv->limit_sem);
572
573 tx_buf = devpriv->usb_tx_buf;
574 rx_buf = devpriv->usb_rx_buf;
575
576 reg[0] = VMK8061_PWM_REG1;
577 reg[1] = VMK8061_PWM_REG2;
578
579 tx_buf[0] = VMK8061_CMD_RD_PWM;
580
581 for (n = 0; n < insn->n; n++) {
582 if (vmk80xx_read_packet(dev))
583 break;
584
585 data[n] = rx_buf[reg[0]] + 4 * rx_buf[reg[1]];
586 }
587
588 up(sem: &devpriv->limit_sem);
589
590 return n;
591}
592
593static int vmk80xx_pwm_insn_write(struct comedi_device *dev,
594 struct comedi_subdevice *s,
595 struct comedi_insn *insn,
596 unsigned int *data)
597{
598 struct vmk80xx_private *devpriv = dev->private;
599 unsigned char *tx_buf;
600 int reg[2];
601 int cmd;
602 int n;
603
604 down(sem: &devpriv->limit_sem);
605
606 tx_buf = devpriv->usb_tx_buf;
607
608 reg[0] = VMK8061_PWM_REG1;
609 reg[1] = VMK8061_PWM_REG2;
610
611 cmd = VMK8061_CMD_OUT_PWM;
612
613 /*
614 * The followin piece of code was translated from the inline
615 * assembler code in the DLL source code.
616 *
617 * asm
618 * mov eax, k ; k is the value (data[n])
619 * and al, 03h ; al are the lower 8 bits of eax
620 * mov lo, al ; lo is the low part (tx_buf[reg[0]])
621 * mov eax, k
622 * shr eax, 2 ; right shift eax register by 2
623 * mov hi, al ; hi is the high part (tx_buf[reg[1]])
624 * end;
625 */
626 for (n = 0; n < insn->n; n++) {
627 tx_buf[reg[0]] = (unsigned char)(data[n] & 0x03);
628 tx_buf[reg[1]] = (unsigned char)(data[n] >> 2) & 0xff;
629
630 if (vmk80xx_write_packet(dev, cmd))
631 break;
632 }
633
634 up(sem: &devpriv->limit_sem);
635
636 return n;
637}
638
639static int vmk80xx_find_usb_endpoints(struct comedi_device *dev)
640{
641 struct vmk80xx_private *devpriv = dev->private;
642 struct usb_interface *intf = comedi_to_usb_interface(dev);
643 struct usb_host_interface *iface_desc = intf->cur_altsetting;
644 struct usb_endpoint_descriptor *ep_rx_desc, *ep_tx_desc;
645 int ret;
646
647 if (devpriv->model == VMK8061_MODEL)
648 ret = usb_find_common_endpoints(alt: iface_desc, bulk_in: &ep_rx_desc,
649 bulk_out: &ep_tx_desc, NULL, NULL);
650 else
651 ret = usb_find_common_endpoints(alt: iface_desc, NULL, NULL,
652 int_in: &ep_rx_desc, int_out: &ep_tx_desc);
653
654 if (ret)
655 return -ENODEV;
656
657 devpriv->ep_rx = ep_rx_desc;
658 devpriv->ep_tx = ep_tx_desc;
659
660 if (!usb_endpoint_maxp(epd: devpriv->ep_rx) || !usb_endpoint_maxp(epd: devpriv->ep_tx))
661 return -EINVAL;
662
663 return 0;
664}
665
666static int vmk80xx_alloc_usb_buffers(struct comedi_device *dev)
667{
668 struct vmk80xx_private *devpriv = dev->private;
669 size_t size;
670
671 size = max(usb_endpoint_maxp(devpriv->ep_rx), MIN_BUF_SIZE);
672 devpriv->usb_rx_buf = kzalloc(size, GFP_KERNEL);
673 if (!devpriv->usb_rx_buf)
674 return -ENOMEM;
675
676 size = max(usb_endpoint_maxp(devpriv->ep_tx), MIN_BUF_SIZE);
677 devpriv->usb_tx_buf = kzalloc(size, GFP_KERNEL);
678 if (!devpriv->usb_tx_buf)
679 return -ENOMEM;
680
681 return 0;
682}
683
684static int vmk80xx_init_subdevices(struct comedi_device *dev)
685{
686 const struct vmk80xx_board *board = dev->board_ptr;
687 struct vmk80xx_private *devpriv = dev->private;
688 struct comedi_subdevice *s;
689 int n_subd;
690 int ret;
691
692 down(sem: &devpriv->limit_sem);
693
694 if (devpriv->model == VMK8055_MODEL)
695 n_subd = 5;
696 else
697 n_subd = 6;
698 ret = comedi_alloc_subdevices(dev, num_subdevices: n_subd);
699 if (ret) {
700 up(sem: &devpriv->limit_sem);
701 return ret;
702 }
703
704 /* Analog input subdevice */
705 s = &dev->subdevices[0];
706 s->type = COMEDI_SUBD_AI;
707 s->subdev_flags = SDF_READABLE | SDF_GROUND;
708 s->n_chan = board->ai_nchans;
709 s->maxdata = board->ai_maxdata;
710 s->range_table = board->range;
711 s->insn_read = vmk80xx_ai_insn_read;
712
713 /* Analog output subdevice */
714 s = &dev->subdevices[1];
715 s->type = COMEDI_SUBD_AO;
716 s->subdev_flags = SDF_WRITABLE | SDF_GROUND;
717 s->n_chan = board->ao_nchans;
718 s->maxdata = 0x00ff;
719 s->range_table = board->range;
720 s->insn_write = vmk80xx_ao_insn_write;
721 if (devpriv->model == VMK8061_MODEL) {
722 s->subdev_flags |= SDF_READABLE;
723 s->insn_read = vmk80xx_ao_insn_read;
724 }
725
726 /* Digital input subdevice */
727 s = &dev->subdevices[2];
728 s->type = COMEDI_SUBD_DI;
729 s->subdev_flags = SDF_READABLE;
730 s->n_chan = board->di_nchans;
731 s->maxdata = 1;
732 s->range_table = &range_digital;
733 s->insn_bits = vmk80xx_di_insn_bits;
734
735 /* Digital output subdevice */
736 s = &dev->subdevices[3];
737 s->type = COMEDI_SUBD_DO;
738 s->subdev_flags = SDF_WRITABLE;
739 s->n_chan = 8;
740 s->maxdata = 1;
741 s->range_table = &range_digital;
742 s->insn_bits = vmk80xx_do_insn_bits;
743
744 /* Counter subdevice */
745 s = &dev->subdevices[4];
746 s->type = COMEDI_SUBD_COUNTER;
747 s->subdev_flags = SDF_READABLE;
748 s->n_chan = 2;
749 s->maxdata = board->cnt_maxdata;
750 s->insn_read = vmk80xx_cnt_insn_read;
751 s->insn_config = vmk80xx_cnt_insn_config;
752 if (devpriv->model == VMK8055_MODEL) {
753 s->subdev_flags |= SDF_WRITABLE;
754 s->insn_write = vmk80xx_cnt_insn_write;
755 }
756
757 /* PWM subdevice */
758 if (devpriv->model == VMK8061_MODEL) {
759 s = &dev->subdevices[5];
760 s->type = COMEDI_SUBD_PWM;
761 s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
762 s->n_chan = board->pwm_nchans;
763 s->maxdata = board->pwm_maxdata;
764 s->insn_read = vmk80xx_pwm_insn_read;
765 s->insn_write = vmk80xx_pwm_insn_write;
766 }
767
768 up(sem: &devpriv->limit_sem);
769
770 return 0;
771}
772
773static int vmk80xx_auto_attach(struct comedi_device *dev,
774 unsigned long context)
775{
776 struct usb_interface *intf = comedi_to_usb_interface(dev);
777 const struct vmk80xx_board *board = NULL;
778 struct vmk80xx_private *devpriv;
779 int ret;
780
781 if (context < ARRAY_SIZE(vmk80xx_boardinfo))
782 board = &vmk80xx_boardinfo[context];
783 if (!board)
784 return -ENODEV;
785 dev->board_ptr = board;
786 dev->board_name = board->name;
787
788 devpriv = comedi_alloc_devpriv(dev, size: sizeof(*devpriv));
789 if (!devpriv)
790 return -ENOMEM;
791
792 devpriv->model = board->model;
793
794 sema_init(sem: &devpriv->limit_sem, val: 8);
795
796 ret = vmk80xx_find_usb_endpoints(dev);
797 if (ret)
798 return ret;
799
800 ret = vmk80xx_alloc_usb_buffers(dev);
801 if (ret)
802 return ret;
803
804 usb_set_intfdata(intf, data: devpriv);
805
806 if (devpriv->model == VMK8055_MODEL)
807 vmk80xx_reset_device(dev);
808
809 return vmk80xx_init_subdevices(dev);
810}
811
812static void vmk80xx_detach(struct comedi_device *dev)
813{
814 struct usb_interface *intf = comedi_to_usb_interface(dev);
815 struct vmk80xx_private *devpriv = dev->private;
816
817 if (!devpriv)
818 return;
819
820 down(sem: &devpriv->limit_sem);
821
822 usb_set_intfdata(intf, NULL);
823
824 kfree(objp: devpriv->usb_rx_buf);
825 kfree(objp: devpriv->usb_tx_buf);
826
827 up(sem: &devpriv->limit_sem);
828}
829
830static struct comedi_driver vmk80xx_driver = {
831 .module = THIS_MODULE,
832 .driver_name = "vmk80xx",
833 .auto_attach = vmk80xx_auto_attach,
834 .detach = vmk80xx_detach,
835};
836
837static int vmk80xx_usb_probe(struct usb_interface *intf,
838 const struct usb_device_id *id)
839{
840 return comedi_usb_auto_config(intf, driver: &vmk80xx_driver, context: id->driver_info);
841}
842
843static const struct usb_device_id vmk80xx_usb_id_table[] = {
844 { USB_DEVICE(0x10cf, 0x5500), .driver_info = DEVICE_VMK8055 },
845 { USB_DEVICE(0x10cf, 0x5501), .driver_info = DEVICE_VMK8055 },
846 { USB_DEVICE(0x10cf, 0x5502), .driver_info = DEVICE_VMK8055 },
847 { USB_DEVICE(0x10cf, 0x5503), .driver_info = DEVICE_VMK8055 },
848 { USB_DEVICE(0x10cf, 0x8061), .driver_info = DEVICE_VMK8061 },
849 { USB_DEVICE(0x10cf, 0x8062), .driver_info = DEVICE_VMK8061 },
850 { USB_DEVICE(0x10cf, 0x8063), .driver_info = DEVICE_VMK8061 },
851 { USB_DEVICE(0x10cf, 0x8064), .driver_info = DEVICE_VMK8061 },
852 { USB_DEVICE(0x10cf, 0x8065), .driver_info = DEVICE_VMK8061 },
853 { USB_DEVICE(0x10cf, 0x8066), .driver_info = DEVICE_VMK8061 },
854 { USB_DEVICE(0x10cf, 0x8067), .driver_info = DEVICE_VMK8061 },
855 { USB_DEVICE(0x10cf, 0x8068), .driver_info = DEVICE_VMK8061 },
856 { }
857};
858MODULE_DEVICE_TABLE(usb, vmk80xx_usb_id_table);
859
860static struct usb_driver vmk80xx_usb_driver = {
861 .name = "vmk80xx",
862 .id_table = vmk80xx_usb_id_table,
863 .probe = vmk80xx_usb_probe,
864 .disconnect = comedi_usb_auto_unconfig,
865};
866module_comedi_usb_driver(vmk80xx_driver, vmk80xx_usb_driver);
867
868MODULE_AUTHOR("Manuel Gebele <forensixs@gmx.de>");
869MODULE_DESCRIPTION("Velleman USB Board Low-Level Driver");
870MODULE_LICENSE("GPL");
871

source code of linux/drivers/comedi/drivers/vmk80xx.c